AL624 Kits - Linear Power Supply / Charger

AL624 Kits - Linear Power Supply / Charger
AL624 Kits - Linear Power Supply / Charger
Overview:
These linear power supply/charger kits have a wide range of applications including: access control, security and CCTV
system accessories that require additional power.
Specifications:
Output:
• Filtered and electronically regulated output.
Battery Backup:
•
•
•
•
Built-in charger for sealed lead acid or gel type batteries.
Maximum charge current 300mA.
Automatic switch over to stand-by battery when AC Fails.
PTC battery protection.
Additional Features:
• Thermal and short circuit protection with auto reset.
• AC input and DC output LED indicators.
• Extremely compact design.
• Includes battery leads.
Board dimensions (approximate): 3”L x 2.5”W x 1.5”H
AL62412C/AL62412CX:
• 12VDC @ 1.2 amp continuous supply current.
• Kit includes: power supply, 12VDC 4AH (AL62424CX - 12VDC 7AH) rechargeable battery and 16.5VAC 20VA
Class 2 Rated plug-in transformer.
AL62424C:
• 24VDC @ 750 mA continuous supply current.
• Kit includes: power supply, two (2) 12VDC 4AH rechargeable batteries and 24VAC 40VA Class 2 Rated
plug-in transformer.
Installation Instructions:
1. Mount unit in desired location/enclosure.
2. Unit is factory set for correct output voltage.
3. Connect wall plug-in transformer to terminals marked [AC].
Use 18 AWG or larger for all power connections (Battery, DC output).
4. Measure output voltage before connecting devices. This helps avoid potential damage.
5. Devices to be powered should be connected to terminals marked [+ DC] and [DC - BAT] carefully observing polarity.
6. Connect battery to terminals marked [BAT +] and [DC - NEG] (battery leads included).
Note: When batteries are not used, a loss of AC will result in a loss of output voltage.
FACTORY SET AT 12V
CUT J1 FOR 24V
CUT J2 FOR 6V
J1
J2
DC
AC
AC AC
+DC - BAT +
LED Diagnostics:
Red (DC)
Green (AC)
Power Supply Status
ON
ON
Normal operating condition.
ON
OFF
Loss of AC, Stand-by battery supplying power.
OFF
ON
No DC output. Short circuit or thermal overload condition.
OFF
OFF
No DC output. Loss of AC. Discharged or no battery present.
Terminal Identification:
Terminal Legend Function/Description
AC/AC
Low voltage AC input.
- DC +
12VDC @ 1.2 amp continuous supply current.
24VDC @ 750mA continuous supply current.
+ BAT -
Stand-by battery connections. Maximum charge rate 300mA.
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A.
IIAL624 Kit - Rev. 090203
I13G
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising