DWR Series Wall Mount Rack Engineered
96-045/ rev 4 / 12-12-03
DWR Series
Wall Mount Rack
Middle Atlantic Products, Inc.
EIA
Compliant
w w w. m i d d l e a t l a n t i c . c o m
The DWR Series 19” wall mount rack is ideal when installing larger
systems in both secured and non-secured areas. Broadest range of
sizes available, with outstanding cable lacing features
Features
• Available in 17”, 22” and 26” depths
• Tool-Free Quick-MountTM system allows for easy, one-person mounting of the center
section to the backpan on the jobsite
• 16-gauge steel construction with 1/8” thick laser-cut corner braces
• Adjustable front rackrail, rear rackrail optional
• Center section hinges for left or right opening
• 1/2”, 3/4”, 1”, 1-1/2”, 2” & 3” electrical knockouts and 5/8” UHF/VHF antenna
knockouts on top & bottom, easily removable for cable pass-through
• 2”, 4” knockouts for Wiremold R 4000 Series raceways, and knockouts for
Middle Atlantic Products Universal Connector Panels on side
• 12-1/2” x 12-1/2” laser knockout opening in the backpan for electrical pull-box
• Backpan includes raised mounting embosses to mount power and other accessories
DWR-24-22
• Laser knockouts in the center section, top and bottom, accommodate four 4-1/2” fans
• Abundant velcro and internal cable tie points
• Finished in a durable black or granite gray textured powder coat
• UL Listed in the US and Canada
EIA compliant 19” wall mount rack shall be Middle Atlantic Products model
# DWR-__-__ (refer to chart). Overall dimensions shall be 23.4" W x
____" H x ___" D (refer to chart). Weight capacity shall be ___ lbs (refer
to chart). Tool-Free Quick-MountTM system enables one-person installation.
Center section and backpan shall be 16-gauge steel, phosphate pre-treated
and finished in a black or granite gray textured powder coat (black finish is
standard, suffix part # with GY to indicate a granite gray finish) . Rackrail
shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in
universal EIA spacing with black e-coat finish and marked rackspaces. Rack
shall be constructed to swing open for component cabling access, center
section shall pivot for either left or right opening. Backpan includes raised
mounting embosses to mount power products and other accessories. Rack
shall have 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, and BNC
knockouts for UHF/VHF antennas knockouts top and bottom.
electronic
version
available
Large laser knockout on backpan shall have a 12-1/2” x 12-1/2” opening for
cable-pass-through. Fan knockouts on top and bottom shall allow for installation
of up to four 4-1/2" fans. Top, bottom and sides shall feature vertical vent pattern. Rack shall be UL Listed in the US and Canada.
OPTIONS
• Front doors - shall be 16-gauge steel, part # FD-XX (solid), VFD-XX
(vented), PFD-XX (plexi), (XX=# of rackspaces of DWR rack)
• Keyless Latch - replaces keylock, fits front & rear doors, part # LATCH
• Rear rail kit - 11-gauge, 10-32 threaded, sold in pairs, hardware
included, part # DWR-RRXX
• Vent Blockers - used to promote active thermal management, part #
VBK-D17 (fits DWR-XX-17), VBK-SD22 (fits DWR-XX-22),
VBK-E20 (fits DWR-XX-26)
at
w w w. m i d d l e a t l a n t i c . c o m
Engineered Mounting Solutions for Low Voltage Applications
US: Riverdale, NJ • Simi Valley, CA • Harvey, IL • Voice: 973-839-1011 Fax: 973-839-1976 • www.middleatlantic.com
Canada: Ottawa, ON • Port Coquitlam, BC • Voice: 613-836-2501 Fax: 613-836-2690 • www.middleatlantic.ca
96-045 / rev 4 / 12-12-03 / DWR Series Sectional Wall Rack
Architects’ and Engineers’ Specifications
DWR Series basic dimensions
All dimensions in inches unless otherwise noted [All bracketed dimensions are in millimeters]
CENTER SECTION
CLEARANCE
DWR-XX-17=8.65 [220]
DWR-XX-22=13.65 [347]
DWR-XX-26=17.65 [448]
BACK PAN
16.00 [406]
5.356 [136]
TOP VIEW
.406 [10]
mounting hole
dia.
(knockouts pictured in top view
are also located on the bottom view)
14.00 [356]
2.63 [67]
12.50
[318] sq.
knockout
7.50 [191]
1.72 [44]
1.82 [46]
1.32 [34]
mounting emboss
for power and other
accessories
2.05 [52]
5/8 UHF/VHF
antenna KO
1” & 1-1/2” KO
1/2” & 3/4” KO
DWR-XX-17=29.8 [757]
DWR-XX-22=32.5 [826]
DWR-XX-26=35.1 [892]
FRONT VIEW
Note: Dimensions for 17”, 22” and 26” deep
models are given in the form (DWR-XX-17 /
DWR-XX-22 / DWR-XX-26)
laser knockouts
for 4-1/2” fans
2” & 3” KO
5/8 UHF/VHF
antenna KO
UCP single
module KO
2x 2.25 [57]
2.88 [73]
2.06 [52]
5.06 [129]
A
16.06 [408]
B
racking
height
(refer to
chart)
shown with
DWR rear
rackrail kit
DWR-RRXX
A
overall
height
(refer to
chart)
2.25 [57] typ.
2 inch electrical KO
1.8 [46] typ.
16.06 [408]
.625 [16]
front rail
setback
D
useable depth
(refer to chart)
PART #
DWR-10-17*
DWR-10-22*
DWR-12-17*
DWR-12-22*
DWR-12-26*
DWR-16-17*
DWR-16-22*
DWR-18-17*
DWR-18-22*
DWR-18-26*
DWR-21-17*
DWR-21-22*
DWR-24-17*
DWR-24-22*
DWR-24-26*
DWR-35-17*
DWR-35-22*
DWR-35-26*
11.5 [292] /
16.5 [419] /
20.5 [521]
23.40 [594]
FRONT VIEW
C
17.3 [439] /
22.3 [566] /
26.3 [668]
CENTER SECTION
A
OVERALL
HEIGHT
24.50 [622]
24.50 [622]
28.00 [711]
28.00 [711]
28.00 [711]
35.00 [889]
35.00 [889]
38.50 [978]
38.50 [978]
38.50 [978]
43.75 [1111]
43.75 [1111]
49.00 [1245]
49.00 [1245]
49.00 [1245]
68.25 [1734]
68.25 [1734]
68.25 [1734]
B
RACKING HEIGHT /
RACKSPACES
17.50 [445] / 10 spaces
17.50 [445] / 10 spaces
21.00 [533] / 12 spaces
21.00 [533] / 12 spaces
21.00 [533] / 12 spaces
28.00 [711] / 16 spaces
28.00 [711] / 16 spaces
31.50 [800] / 18 spaces
31.50 [800] / 18 spaces
31.50 [800] / 18 spaces
36.75 [933] / 21 spaces
36.75 [933] / 21 spaces
42.00 [1067] / 24 spaces
42.00 [1067] / 24 spaces
42.00 [1067] / 24 spaces
61.25 [1556] / 35 spaces
61.25 [1556] / 35 spaces
61.25 [1556] / 35 spaces
C
OVERALL
DEPTH
17.00 [432]
22.00 [559]
17.00 [432]
22.00 [559]
26.00 [660]
17.00 [432]
22.00 [559]
17.00 [432]
22.00 [559]
26.00 [660]
17.00 [432]
22.00 [559]
17.00 [432]
22.00 [559]
26.00 [660]
17.00 [432]
22.00 [559]
26.00 [660]
A
5.06 [129]
2.06 [52]
Wiremold 4000
Series R raceway
D
USEABLE
DEPTH
15.00 [381]
20.00 [508]
15.00 [381]
20.00 [508]
24.00 [610]
15.00 [381]
20.00 [508]
15.00 [381]
20.00 [508]
24.00 [610]
15.00 [381]
20.00 [508]
15.00 [381]
20.00 [508]
24.00 [610]
15.00 [381]
20.00 [508]
24.00 [610]
Middle Atlantic Products, Inc.
WEIGHT
CAPACITY
200 lbs.
200 lbs.
200 lbs.
200 lbs.
200 lbs.
200 lbs.
200 lbs.
250 lbs.
250 lbs.
250 lbs.
250 lbs.
250 lbs.
300 lbs.
300 lbs.
300 lbs.
300 lbs.
300 lbs.
300 lbs.
* Note: Black finish standard, suffix part # with ‘GY’ to indicate a granite gray finish
US: Riverdale, NJ • Simi Valley, CA • Harvey, IL • Voice: 973-839-1011 Fax: 973-839-1976 • www.middleatlantic.com
Canada: Ottawa, ON • Port Coquitlam, BC • Voice: 613-836-2501 Fax: 613-836-2690 • www.middleatlantic.ca
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising