PRESSURE CALIBRATOR
PC6
PRESSURE
CALIBRATOR
The PC6 PRO Pressure Calibrator combines the latest developments in
pressure instrumentation with advanced sensor and component technology
to offer a versatile calibration instrument.
It is designed for accurately testing and calibrating the following types of
instruments:
• Pressure Transducers / Transmitters
• Pressure Switches / Relief Valves
• Pressure Indicators (analogue / digital)
• Process Indicators
• Current / Voltage to Pressure Converters
prohtp1.tif
The PC6 PRO is supplied with our hand held test systems:
LTP1 Low Pressure pneumatic test system -1 to 3 bar (-30 inHg to 45 psi)
TP1 Pneumatic pressure test system -1 to 40 bar (-30 inHg to600 psi)
HTP1 Hydraulic pressure test system to 1000 bar (15,000 psi)
The compact size of the PC6 PRO does not compromise functionality. It can
simultaneously show pressure versus voltage, current, date & time,
percentage of pressure, pressure switch status, temperature, maximum or
minimum pressure values . Data can be logged and stored with time and
date stamping for future reference. PC6 PRO can source current and
voltage using various options e.g. continuous, step or square root functions.
The modular design of the PC6 PRO allows for a customised calibrator to be
created, giving minimal functions if a non-complex instrument is required
(i.e. A simple pressure indicator). Alternatively, fully featured calibration
systems can be supplied, accommodating various pressure ranges using
external pressure modules (EPM) or Digital Pressure Modules (DPM).
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Low cost, small and portable
Pressure measurement range -1 to 1000bar /-30 inHg to
15,000psi
Voltage and current measurement and sourcing
Pressure to Current or Voltage conversion
Current or Voltage to Pressure conversion
Two wire Transmitter Simulation
Simultaneous display of pressure and selected function
Timed / Event data storage with date & time stamping
Up and download Cal procedures via RS232 Interface
Alternative languages available: French, German, Italian,
Spanish
Pressure switch test
Leak rate measurement 1 second to 999 days
Tare, Maximum and Minimum pressure values
Display hold facility
Supply output for transducer / transmitter
Pressure module temperature measurement
Resolution variation facility
External pressure module (EPM or DPM) interchangeability
for required pressure ranges
Windows based software ‘SiCalPro’ for remote control
operation and data transfer into many applications (Optional)
‘ CE ’ marked
pc6pro.tif
www.si-pressure.com
Tel: 0121 784 6855 (UK)
Tel: +44 121 784 6855 (Int)
Fax: 0121 784 4795 (UK)
Fax: +44 121 784 4795 (Int)
SI Pressure Instruments Ltd, Garretts Green Lane, Birmingham B33 OYA UK . sales@si-pressure.com
FM 20157
PC6 PRO Specification
Model
PC6-PRO-0.1-C
PC6-PRO-1-C
PC6-PRO-2-C
PC6-PRO-5-C
PC6-PRO-10-C
PC6-PRO-20-C
PC6-PRO-40-C
G
G or A
G or A
G or A
G or A
G or A
G or A
Range
bar
psi
-0.1 to 0.1 -1.5 to 1.5
-1 to 1
-15 to 15
-1 to 2
-15 to 30
-1 to 5
-15 to 75
-1 to 10
-15 to 150
-1 to 20
-15 to 300
-1 to 40
-15 to 600
Accuracy
(FS) up to
0.025%
0.025%
0.025%
0.025%
0.025%
0.025%
0.025%
Model
PC6-PRO-70-C
PC6-PRO-100-C
PC6-PRO-200-C
PC6-PRO-350-C
PC6-PRO-700-C
PC6-PRO-1000-C
SG or A
SG or A
SG or A
SG or A
SG or A
SG or A
Range
Accuracy (FS)
up to
bar
psi
0 to 70 0 0 to 1000
0.025%
0 to 100 0 to 1500
0.025%
0 to 200 0 to 3,000
0.025%
0 to 350 0 to 5,000
0.025%
0 to 700 0 to 10,000
0.025%
0 to 1000 0 to 15,000
0.025%
Other Pressure ranges are available to special order.
G = Vented Gauge, A = Absolute (Not a standard range), SG = Sealed Gauge
Differential units are available as EPM (Contact Si for details and data sheet on EPM)
Overload Pressure
10% FS
Resolution
6 Digits
Pressure units
bar, mbar, MPa, kPa, psi, kg/cm², atm, inH0,
mH ²0, mmH²0, inHg, mmHg, unit1, unit2 (user defined)
²
Overload Warning
Flashing display and audible tone at 110% of FS
Temperature Display
Temperature of pressure sensor module (Accuracy: ± 0.5°C)
Measurement
Voltage *
(Auto Range)
Current *
Range
0 to 100mV
0 to 5V
0 to 50V
0 to 50mA
Resolution
1uV
0.1mV
1mV
1uA
Accuracy
0.025% FS
0.025% FS
0.025% FS
0.025% FS
Input resistance
1 MW
1 MW
1 MW
6W
Sourcing
Voltage *
Current *
0 to 10V
0 to 50mA
0.2mV
1uA
0.025% FS
0.025% FS
Max. Load
20mA
330 Ohm
Voltage Output
Pressure Switch Test
Operating Temperature
Calibrated Temperature
Calibrated Temp. Range
Storage Temperature
Temperature Effects
RS232 Parameters
Zero Reset
Data Capacity
Display
Pressure Media
Humidity
Resolution Select
Power Supply
Battery Life
Low Battery
Dimensions
Weight
Electrical Connections
Pressure Connections
Software (optional)
System Requirements:
Ordering Codes:-
The PC6 PRO Indicator version does
not include the Voltage/Current input/output or EPM.
Substitute ‘C’ for ‘I’ in the part No. when ordering an indicator.
*Temperature coefficient ± 0.005% of reading / °C
with respect to 20°C
Regulated DC supply 10V ± 0.1% max. current 10mA
Unregulated DC supply 24V ± 10% max. current 50mA
Status OPEN / CLOSED
0 to 50°C
20°C ± 2°C
0 to 50°C
-20 to 70°C
0.001% of reading /°C between 0 to 50°C
Baud rate 1200, 2400, 4800, 9600, stop bits 1 or 2, status ON or OFF
Manual - keyboard operation
437 records into a maximum of 20 files, 32k memory (additional 585 records, 32k memory option available)
Backlit LCD, 16 characters x 2 line alpha numeric
Water, Oil, Non-corrosive gases ( for other media contact Si )
5 to 95% relative humidity non condensing
Increase or decrease by a factor of 10
6V NiMH rechargeable battery / mains operation via charger (supplied)
Up to 10 Hours fully charged
Continuous check, audio and visual warning
92 x 110 x 59mm (Calibrator head only)
850 g (Calibrator head only)
Ground, Voltage/Current Input/output, Pressure Switch
Standard 2mm sockets
Battery Charger
2-pole miniature round connector
RS232
8-pole miniature round connector
EPM
14-pole miniature round connector
3/8BSP male 'quick-fit' / 1/4BSP or 1/4NPT male (Pneumatic)
3/8BSP female 'quick-fit' / 3/8BSP or 3/8NPT male (Hydraulic)
‘SiCalPro’ will allow users to control the PC6 PRO Calibrator remotely through a virtual instrument panel on
the computer screen. The calibration data can be logged, viewed and printed in graphical format or
on a calibration certificate.
Minimum Intel Pentium® with Windows® 95 or higher.
PC6 - PRO - XXXX - C - X - X
Range
P - pneumatic system (LTP1 up to 3 bar / TP1 up to 40 bar)
H - hydraulic system (HTP1)
1-UK / 2-Europe / 3-USA / 4-AUS
C or I (Calibrator or Indicator)
www.si-pressure.com
Tel: 0121 784 6855 (UK)
Tel: +44 121 784 6855 (Int)
Fax: 0121 784 4795 (UK)
Fax: +44 121 784 4795 (Int)
SI Pressure Instruments Ltd, Garretts Green Lane, Birmingham B33 OYA UK . sales@si-pressure.com
FM 20157
31-0431 Iss.3 DIM. 5179
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising