Signaling Devices - Visual and Audible

Signaling Devices - Visual and Audible
Signaling Devices Visual and Audible
Section S
A comprehensive range of signaling products specifically designed for use in
areas where harsh environmental conditions prevail and where there is a risk of
explosion due to the presence of flammable atmospheres.
Signaling Devices - Visual and Audible
S
Table of Contents
Section S of the Eaton's Crouse-Hinds Catalog contains the following product groupings:
Section 1S
Section 5S
Fire Alarm or Emergency Call
Points and Heat Detectors
Speakers and Tone Generators
(for use in hazardous areas)
Call points are used for fire alarm
activation, evacuation, and process shutdown. Heat detectors are used in
turbine/generator skids, switchgear or
motor control status rooms, and process
tank areas or transmission lines
SM87PBL
SM87BG
PB
BG
BG2
BG3
HD1
(for use in hazardous areas)
For plant-wide alarm notifications and
audible process alarms
DB1
DB3
DB4
DB5
DB12
DB15
DB16 UL
ETH855, ETH845
ETH840, ETH640
ETH
W2H
WH
ESR
Section 6S
Visual and Audible
Combination Units
Section 2S
Strobe Lights
(for use in hazardous and
non-hazardous areas)
Strobe lights for condition signaling,
security alerts, equipment obstruction
warnings, and emergency evacuation
signaling
XB15
VWL
XB12
XB16 UL
OX2L
XB13
SM87 HXB
VX2L
EXFASC
XB11
OAL
EXR
XB4
VAL
OWL
(for use in hazardous areas)
Strobe light and audible tone generator
in one package
DB3 / XB11
DB3 / SM87HX
DB12 / XB13
Section 3S
Steady-On Beacons
S
(for use in hazardous areas)
For safety lighting, continuous
communication sources, obstacle
warnings, exit or entrance lights, and for
identifying the location of safety
equipment such as showers or emergency
telephones
FB4
FL4
FB11 UL
FB12 UL
FB15
SM87 LU3
SM87 LU1
EXSO, EXDSO
VF
Section 4S
Status Lights
(for use in hazardous areas)
For process status, messaging, and alert
or emergency condition indication
SM87 SL
XB11 SLUL
XB12 SL, FB12 SL
1218
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
S
Visual and Audible Signaling Devices
For Hazardous and
Non-hazardous Locations
Visual and Audible
Signaling Devices as tough
as your environment
• The broadest line of harsh and
hazardous signaling, alarm and
communication products available in
both IEC and NEC designs and
certifications.
• Hazardous area call points (fire alarm or
emergency notification devices) provide
you a unique product offering unequalled
by any other manufacturer of hazardous
location signaling products.
• Worldwide listings with UL, cUL, ATEX,
GOST, CSA and CQST (Chinese)
approvals provide customer solutions
that the competition can’t match.
• Superior enclosure materials, providing
unmatched ingress protection and
corrosion resistance from the harshest
conditions.
• A unique signaling product offering
integral visual and audible signaling
capability pre-wired for simultaneous
output activation.
• Heat detectors for early indication of
potential processing problems.
Manual Call Points
Strobes and Beacons
Horns and Speakers
Combination Units
Applications:
• For use in hazardous and non-hazardous
areas.
• As visual signals or warning lights.
• To identify the location of safety
equipment such as emergency shower,
eye wash stations, and emergency
telephones, fire extinguishers and
emergency stop switches.
• For status indication of machinery or
processes.
• To indicate dangerous areas or areas
requiring caution.
• To signal dangerous or hazardous
conditions.
• Where a high-decibel sound is required
for alert or evacuation.
Environmental:
• What is the hazardous area classification
(NEC/CEC) of the location in which the
luminaire will be installed?
Signaling Requirements:
• What will the visual signal be used for
(communicating, alerting, warning)?
Physical Arrangements:
• Type of luminaire mounting needed.
Lens Color and Their
Applications
1. Strobe Lights — Used for signaling or
warning of various conditions. Emits a
powerful blast of bright light.
2. Rotating Beacons — Used to signal
over a large area when the light must
be seen from a long distance.
3. Steady-on Beacons — Typically used
as a continuous source to warn,
communicate or draw attention to an
area, machine or process.
4. Stack Lights — Used for multiple
indication in one signaling device.
Compact and versatile, the three-color
(red, amber and green) is most popular.
Most Eaton's Crouse-Hinds strobes,
steady, and flashing beacons come in six
lens colors: amber, blue, clear, green,
magenta and red. Eaton's Crouse-Hinds
LED signals come in amber, blue, green,
red and, in some cases, white. The
following are examples of how various
lens colors are used in industrial and
commercial signaling environments:
Amber - Denotes caution
Blue - Used for safety and security
Clear (or White) and Green - Used to
indicate normal run operation
Magenta - Used for radiation alarms
Red - Denotes emergency or warning
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1219
S
Considerations for
Selection:
What Types of Visual Signals
are Available?
S
S
1220
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Call Points and Heat Detectors
1S
Hazardous
Description
Page No.
Fire Alarm or Emergency Call Points
BG, BG2, BG3
PB
SM87
see pages 1222–1228
see pages 1222–1228
see pages 1222–1228
Heat Detectors
HD1
see pages 1229–1231
1S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1221
1S
Fire Alarm or Emergency Call Points
Hazardous Locations
Weatherproof
Marine
MEDC Series
Class I, Div. 2, Zone 2 Touch-safe coated
glass for finger activation.
Class I, Div. 2, Zone 2 Push to activate.
Applications:
1222
CAN: 1-800-265-0502
1S
These manual fire alarm call points have
been designed for use in hazardous
locations and harsh environmental
conditions. They offer:
• The broadest range of hazardous
location manual fire alarm activation
devices in the industry.
• The compact design, activation choices
such as pushbutton or break glass,
housing color choices and
comprehensive worldwide certifications
make this product family a project
closer.
• Flexibility as all units accept metric cable
or NPT conduit entries, and each unit
can be custom designed for a specific
fire alarm or emergency activation
requirements.
www.crouse-hinds.com
US: 1-866-764-5454
Class I, Div. 1 Push to activate.
Key switch to reset.
• Fire alarm activation
• Emergency evacuation
• Process shut-down
Industries:
•
•
•
•
•
Liquid natural gas terminals
Energy exploration
Chemical
Refinery
Power generation
Features and Benefits:
• In-line and end-of-line resistors fitted for
use in fire activation circuits
• Optional LED to indicate operation
• Plastic break glass element available—
easy activation yet safe to touch
• Corrosion resistant GRP—ideal for
marine applications
• Retained stainless steel cover screws—
won’t corrode and never lose screws
• Optional lift flap for protection
Copyright© 2013 Eaton’s Crouse-Hinds Business
Hazardous Locations
Weatherproof
Marine
Fire Alarm or Emergency Call Points
1S
MEDC Series
Push Button Fire Alarm Call Point—Explosionproof
SM87PBL
Certification
UL Listed for:
Certified Ambient Temperature
UL, CSA, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Marine Grade Alloy
Stainless Steel (ATEX only)
Entries
Up to 4 × 1/ 2" or 3/ 4" NPT
Weight
5.5lb/2.5kg
Options
Certification
Body color, certification
Ordering Code
UL, CSA, Class I, Div. 1,
Groups C, D, Zone 1
36200102
SM87BG
Cat. #
Standard Product Configuration
SM87PBLAUL3T3B3NNR
Explosion protected, 2 × 1/2" NPT entries,
duty label "Fire—Press Here," single
pushbutton switch—latching, marine
grade alloy, red finish
Break Glass Call Point—Explosionproof
Certification
Intrinsically Safe
Flameproof
ATEX, CSA, GOST-R, GOST-K, GB
ATEX Ex II 1G, Exia IIC T4
ATEX Ex II 2G, Exd IIC T6
Certified Ambient Temperature
–55°C to +70°C
–20°C to +55°C (LED)
Ingress Protection
IP66 & 67
Material
Stainless Steel or Alloy
Entries
Up to 4 x 20mm or 25mm
Weight
3.8kg (Steel) 2.5kg (Alloy)
Options
Body color, 3 & 4 pole changeover switch, certification
Certification
Ordering Code
Cat. #
Standard Product Configuration
ATEX Ex II 2GD
16200174
SM87BGLAD1B1NNR
Break glass call point, Ex II 2GD,
Exd IIC T6, IP 66 & 67,
1 × M20 bottom entries, duty label,
"Fire Breakglass," alloy material, red finish
PB
Push Button Fire Alarm Call Point—Hazardous Locations
Certification
UL Listed for:
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 4 × 1/ 2" NPT, M20
Weight
2.6lb/1.2kg
Options:
1S
Certified Ambient Temperature
UL, ATEX
Class I, Div. 2, Groups A, B, C, D
Class I, Zones 1 & 2
–13°F to +158°F
–25°C to +70°C
Body color, certification
Certification
Ordering Code
Cat. #
Standard Product Configuration
UL, Class I, Div. 2,
Groups A, B, C, D,
Zone 1 & 2
869105
PBUL4C6C0DSN7R
Explosion protected, 2 × 1/2" NPT bottom entries,
no duty label, DC, single pushbutton switch
latching, painted red GRP
ATEX Ex II 2GD
800010
PBEB4B6B0DSN6R
Explosion protected, Ex II 2GD, Exe, IIC, T6, Zone 1
& 2, 2 × M20 entries, DC, single switch, red finish
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1223
1S
Fire Alarm or Emergency Call Points
Hazardous Locations
Weatherproof
Marine
MEDC Series
BG
Break Glass Fire Alarm Call Point—Hazardous Locations
Certification
Certification
UL Listed for:
UL, ATEX
Class I, Div. 2, Groups A, B, C, D
Class I, Zone 2
Certified Ambient Temperature
–13°F to +131°F
–25°C to +55°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 4 × 1/ 2" NPT, M20
Weight
2.6lb/1.2kg
Options
Body color, certification, lift flap, LED,
tag & duty label, series and EOL resistor
Type
Ordering Code Cat. #
UL Listed, Class I, Div. 2,
Haz. Loc.
Groups A, B, C, D, Zone 2
869101
Explosion protected, Zone 0, 1 & 2, DC, 2 × M20 bottom entries,
single break glass switch latching, single switch, red finish
ATEX Ex II 1GD
Intrinsically
800002
Safe
BGIB4B6B1DSN6R
ATEX Ex II 2GD
Increased
Safety
Explosion protected Ex II 2GD, Exed, IIC, T6, Zone 1 & 2,
BGEB4B6B1DSN6R DC, 2 × M20 bottom entries, single break glass switch
latching, red finish
IP66 & 67
Waterproof 800001
BG2
800003
BGWN4B6B1ASN6R
Dust-tight and weatherproof, uncertified AC, 2 × M20 bottom
entries, single break glass switch latching, red finish
Break Glass Call Point—Hazardous Locations
Certification
Intrinsically Safe
Increased Safety
ATEX
ATEX Ex II 1GD, Exia IIC T4
ATEX Ex II 2GD, Exed(m) IIC T4 (T6)
Certified Ambient Temperature
–40°C to +55°C (Exia)
–20°C to +50°C (Exed)
Ingress Protection
IP66 & 67
Material
Corrosion-free GRP
Entries
2 × M20
Weight
1.2kg
Options
Certification
ATEX Ex II 1GD
Type
Lift flap
Ordering Code Cat. #
Intrinsically Safe
800005
BG3
Standard Product Configuration
Explosion protected, Zone 0, 1 & 2, DC, 2 × M20 bottom entries,
BG2INN1N
single break glass switch latching, red finish
Increased Safety Increased Safety 800004
1S
Standard Product Configuration
Explosion protected, 2 × 1/ 2" NPT bottom entries, single
BGUL4C6C1DSN7R
break glass switch latching, painted red GRP finish
BG2EDC1N
Explosion protected, Zone 1 & 2, DC, 2 × M20 bottom entries,
single break glass switch latching, red finish
Break Glass Call Point—Explosionproof & Weatherproof
Certification
UL Listed for:
ATEX, GB
ATEX Ex II 1G, Exia IIC T4
Certified Ambient Temperature
–55°C to +55°C (Exia)
Ingress Protection
IP66 & 67
Material
Corrosion-free GRP
Entries
2 × M20
Weight
0.5kg
Options
Certification
Type
Body color, lift flap
Ordering Code
Cat. #
Standard Product Configuration
ATEX Ex II 1G
Intrinsically Safe
800007
BG3I1NBN
Explosion protected, Zone 0 / 1 & 2 DC, standard models are surface
mount version, have 2 × M20 bottom entries, single break glass switch
latching, duty label "Burning House," red GRP finish
ATEX Ex II 1G
Weatherproof
800006
BG3W1NBN
Uncertified, dust-tight & weatherproof, 24V DC, single break glass
switch latching, duty label "Burning House," red finish
1224
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Hazardous Locations
Weatherproof
Marine
Fire Alarm or Emergency Call Points
1S
MEDC Series
Specification—SM87PBL Unit
Certification:
UL Listed: Class I, Div. 1, Groups C, D and
Class I, Zone 1. Listing No: E186629.
CSA Certification:
I.S. Version
Class I, Groups A, B, C, D
Exd Class I, Div. 2 1/ 2 Group D
Enclosure type 4, Cert. No. 79120
ATEX approved:
EN50014, EN50018
Cert. No. Baseefa 03ATEX0075
Voltage:
24V AC/DC
Rating:
2 amp
Switches:
2 pole c/o, wired to terminals
Terminals:
Will accept up to 14AWG cable
Entries:
Up to 4 × 1/ 2" or 3/ 4" NPT, 20mm, 25mm
Optional
Indicator:
A red high intensity LED can be fitted for alarm
indication
Material:
LM 25 TF Marine Grade Alloy or Grade 316
ANCHB stainless steel
Field Installed Duty Labels
Weight:
5.5 lb/2.5kg (approx.)
Use with SM87
Call Points:
Duty Label
Ordering Code
Finish:
Epoxy paint finish as standard or to customer's
specification
SM87PBL/SM87BGL
Blank
869530
SM87PBL/SM87BGL
Fire
869526
Certified
Temperature:
SM87PBL/SM87BGL
Emergency Shut Down
869532
SM87PBL/SM87BGL
Suppression Release
869534
Exd/Exi:
–55°C to 70°C
–20°C to +55°C (LED version only)
UL:
–67°F to +158°F (–55°C to +70°C)
–4°F to +131°F (–20°C to +55°C) LED version
only
CSA:
–58°F to +131°F (–50°C to +55°C) (Exd)
–58°F to +104°F (–50°C to +40°C) (Exi)
Ingress
Protection:
NEMA 4X and 6, IP66 & 67
SM87 PB IP68 (40m for 8 hours)
Addressable:
Consult MEDC for specification
Resistor Values: 470R minimum (DC & I.S. units only)
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1225
Fire Alarm or Emergency Call Points
1S
Hazardous Locations
Weatherproof
Marine
MEDC Series
Specification—SM87BGL Unit
Break glass
unit, latching
Lift flap, break
glass, latching
Type SM87BGL
Voltage:
Rating:
Switches:
Exd 24V AC/DC Exia 28V
2 amp
2 pole c/o, wired to terminals
Optional up to 4 pole
Will accept up to 2.5mm2 cable
Up to 4 x 20mm or 25mm ISO EExd/EExia
A red high intensity LED can be fitted for alarm
indication
Grade 316 ANC4B Stainless Steel or LM 25 TF
Marine Grade Alloy
3.8 kg. steel (approx.) or 2.5 kg. alloy (approx.)
Epoxy paint finish as standard or to customer's
specification
CENELEC EN 50014, EN50018 (for Exd) and
EN50020 (for Exi)
ExiaIIC T4 Cert No. Baseefa 02 ATEX 0152X
ExdIIC T5/T6 Cert No. Baseefa 03 ATEX 0075
CSA Certification:
Class I Groups A-D I.S. version (SM87 PBI
only)
Class I, Div. 1 & 2, Group D
(Exd – SM87 PB & SM87 BG)
GOST 'R' Certification:
1Exib IIC T4, 1Exd IIC T4*
GOST 'K' Certification:
Exib IIC T4*
Chinese Certification:
CQST – Exia IIC T4, Exd IIC T5/T6*
Terminals:
Entries:
Optional
Indicator:
Material:
Weight:
Finish:
Both the ExiaIICT4 units and the ExdIICT6 units have the same
external appearance. Also the internal components are identical
throughout the range. Each unit can be wired for either NO, NC or
CO contacts to customer specification.
Certification:
Field Installed Duty Labels
Use with SM87
Call Points:
Duty Label
Ordering Code
SM87PBL/SM87BGL
Blank
869530
SM87PBL/SM87BGL
Fire
869526
SM87PBL/SM87BGL
Emergency Shut Down
869532
SM87PBL/SM87BGL
Suppression Release
869534
Type SM87LBGL
*Available upon request
Certified
Temperature:
Exd/Exi*
–55°C
–20°C
CSA
–50°C
–50°C
to +70°C
to +55°C (LED version only)
to +55°C (Exd)
to +40°C (Exi)
*Note: includes ATEX, GOST & Chinese versions.
Ingress
Protection:
IP66 and IP67
SM87 PB IP68 (40m for 8 hours)
Resistor Values: 470R minimum (DC & I.S. units only)
1S
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1226
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Fire Alarm or Emergency Call Points
Hazardous Locations
Weatherproof
Marine
1S
MEDC Series
Field Installed Duty Labels
Use with PB
Call Points:
Duty Label
Ordering Code
PB
Blank
869530
PB
Fire
869526
PB
Emergency Shut Down
869532
PB
Suppression Release
869534
Specification—PB Unit
Certification:
Voltage:
Certified Temperature:
Ingress Protection:
Terminals:
Switch Rating (1 or 2
changeover switches fitted):
Cable Entries:
Weight:
Material:
Finish:
Resistors:
LED Indication:
Labeling:
UL Listed — Hazardous locations: Class I, Div. 2, Groups A, B, C, D and
Class I, Zone 2
UL Listing No. E186629
Ordinary locations: Fire Alarm Boxes. UL Listing No. S8117
CSA Certified to C22.2 (PB only), Nos. 0-M, 0.4M, 14-M, 25,30-M, 94,
142-M 1987, 157M 1987, 157–92, Enclosure Type 4, 4A, Class I, Groups A,
B, C, D, Cert. No. 79120
ATEX Approved:
EN50014, EN50018, EN50019, EN50028
Cert. No. BAS02ATEX2105X (BG & PB), Exed II C T6 (switch only), Exedm
IIC T4 (other versions)
Up to 240V
BGUL/PBUL:
–13°F to +131°F (–25°C to + 55°C)
PB (CSA):
–58°F to +104°F (–50°C to +40°C)
NEMA 4X & 6, IP66 & 67
7 x 14 AWG standard
Max Rating 240VAC, 3A
Up to 4 entries 1/ 2" NPT or 20mm
2.6 lb/1.2kg (varies with model & entries)
Glass reinforced polyester
Red epoxy painted finish as standard or to customer’s specification
Various configurations available on versions up to 24V, 470R minimum
Basic double changeover
switch wiring diagram
For versions containing
in-line and end-of-line
resistors, please specify
your requirements.
1S
A high intensity red LED can be fitted as an optional extra to indicate
operation on versions up to 24V
PB & BG duty label — worded to client’s requirements (riveted on)
PB & BG tag label — worded to client’s requirements (screwed on)
Basic single changeover
switch wiring diagram
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1227
1S
Fire Alarm or Emergency Call Points
Hazardous Locations
Weatherproof
Marine
MEDC Series
Field Installed Duty Labels
Use with BG
Call Points:
BG
Duty Label
Ordering Code
Blank
869531
BG
Fire
869525
BG
Emergency Shut Down
869533
BG
Suppression Release
869535
Specification—BG Unit
Certification:
Voltage:
UL Listed — Hazardous locations: Class I, Div. 2, Groups A, B, C, D and
Class I, Zone 2
UL Listing No. E186629
Ordinary locations: Fire Alarm Boxes. UL Listing No. S8117.
CSA Certified to C22.2 (PB only), Nos. 0-M, 0.4M, 14-M, 25,30-M,
94, 142-M 1987, 157M 1987, 157–92, Enclosure Type 4, 4A, Class I,
Groups A, B, C, D, Cert. No. 79120
ATEX Approved:
–58°F to +104°F (–50°C to +40°C)
Cert. No. BAS02ATEX2105X (BG & PB), Exed II C T6 (switch only),
Exedm IIC T4 (other versions)
Up to 240V
BGUL/PBUL:
–13°F to +131°F (–25°C to + 55°C)
PB (CSA):
–58°F to +104°F (–50°C to +40°C)
Ingress Protection:
NEMA 4X & 6, IP66 & 67
Terminals:
7 x 14 AWG standard
Switch Rating (1 or 2
changeover switches fitted):
Max Rating 240VAC, 3A
Cable Entries:
Up to 4 entries 1/2" NPT or 20mm
Weight:
2.6 lb/1.2kg (varies with model & entries)
Material:
Glass reinforced polyester
Finish:
Red epoxy painted finish as standard or to customer’s specification
Resistors:
Various configurations available on versions up to 24V, 470R minimum
LED Indication:
A high intensity red LED can be fitted as an optional extra to indicate
operation on versions up to 24V
Labeling:
BG glass label — reads either:
(1) Fire break glass — press here
(2) Break glass — press here
(3) Worded to client’s requirements
PB & BG tag label — worded to client’s requirements (screwed on)
PB & BG duty label — worded to client’s requirements (riveted on)
1S
Certified Temperature:
Basic single changeover
switch wiring diagram
Basic double changeover
switch wiring diagram
For versions containing in-line
and end-of-line resistors,
please specify your
requirements.
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1228
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Heat Detectors
Explosionproof & Intrinsically Safe
1S
MEDC Series
Exd version (optional guard)
Exia/Exem/UL versions (optional guard)
The MEDC heat detector has been designed for use in hazardous
environments. These units are suitable for fire alarm and/or
suppression systems in offshore and onshore applications including
paint spray booths, flammable material stores, turbine rooms, extract
ductwork and other hazardous areas throughout the oil & gas,
petrochemical and process industries.
Comprising a Fenwal rate-compensated detector with all-stainless
steel external construction, mounted to either a type SM87 marine
grade alloy enclosure (Exd version) or JB10 corrosion-free GRP
enclosure (Exia, Exem/UL versions). The contact in the detector
CLOSES at alarm temperature.
To select appropriate temperature setting, see specification on
reverse.
Applications:
• Compressor turbine/generator skids
• Switchgear or motor control status rooms
• Process tank areas or transmission lines
Typical Industries:
•
•
•
•
Power generation
Nuclear plants
Chemical processing
Upstream/downstream oil and gas
Certifications and Compliances:
• Zone 0, Zone 1 and Zone 2
• Exia IIC T4/T6, Exd IIB T3/T6 or Exem II T6
• ATEX approved
–Ex II 1G (Exia)
–Ex II 2G (Exd/Exem)
• BASEEFA certified
• UL listed for USA and Canada
–Class I, Div. 2, Groups A, B, C, D
• GOST 'R' & 'K' certified
• Chinese (CQST) certified
• IP66 & IP67
• Certified temperature:
–20°C to +125°C (Exd)*
–20°C to +55°C (Exem/UL)
–55°C to +55°C (Exia)
• Stainless steel probe
• Detector temperature settings:
60°C to 385°C, (140°F to 725°F)
• Marine grade Alloy or GRP enclosure
• Optional guard
*Model dependent.
1S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1229
1S
Heat Detectors
Explosionproof & Intrinsically Safe
MEDC Series
Heat Detector — Explosionproof & Intrinsically Safeu
HD1
Certification
Flameproof
Increased Safety
Intrinsically Safe
cULus, ATEX, GOST-R, GOST-K, GB
ATEX Ex II 2G, Exd IIB T6
ATEX Ex II 2G, Exem II T6
ATEX Ex II 1G, Exia IIC T6
Certified Ambient
Temperature
–20°C to +125°C Exd (T3) ATEX/GOST 'R'
–20°C to +55°C Exd (T6)/Exem
–55°C to +55°C Exia
Ingress Protection
IP66 & 67
Material
Marine Grade Alloy (Exd)
Corrosion-free GRP (Exia/Exem)
Temperature Settings
140°F to 725°F (60°C to 385°C)
Entries
2 × M20
Weight
1.1–2.0kg (model dependent)
Options:
Enclosures, color, tag and duty labels,
temperature setting
Compensated Heat Detector with Guard Fitted Natural Black Finish
To select appropriate temperature settings, choose detector at 56°C (100°F) above maximum ambient temperature.
Temperature
Tolerance
Color Code
Setting
Certification
(°F)
(°C)
(°F)
(°C)
Detector Tip
Ordering Code
UL, cUL, Class I, Div 2,
Groups A, B, C, D
Class I, Zone 2, IIC
140
60
+7/-8
±4
160
71
+7/-8
190
88
+7/-8
225
107
275
46500152
HD1ULE140GN
±4
Black
46500153
HD1ULE160GN
±4
White
46500154
HD1ULE190GN
+7/-8
±4
White
46500155
HD1ULE225GN
135
±10
±6
Blue
46500156
HD1ULE275GN
325
163
±10
±6
Red
46500157
HD1ULE325GN
360
182
±10
±6
Red
46500158
HD1ULE360GN
450
232
±15
±8
Green
46500159
HD1ULE450GN
1S
Certification
1230
Cat. #
Black
Standard Product Configuration
Ordering Code
Cat. #
465607
HD1BD140NG
160°F detector, marine grade alloy enclosure, painted gray
465602
HD1BD160NG
190°F detector, marine grade alloy enclosure, painted gray
465603
HD1BD190NG
ATEX Exd
225°F detector, marine grade alloy enclosure, painted gray
465614
HD1BD225NG
ATEX Exd
275°F detector, marine grade alloy enclosure, painted gray
465609
HD1BD275NG
ATEX Exd
325°F detector, marine grade alloy enclosure, painted gray
465605
HD1BD325NG
ATEX Exd
360°F detector, marine grade alloy enclosure, painted gray
46500043
HD1BD360NG
ATEX Exd
450°F detector, marine grade alloy enclosure, painted gray
465601
HD1BD450NG
ATEX Exd
600°F detector, marine grade alloy enclosure, painted gray
46500045
HD1BD600NG
ATEX Exd
725°F detector, marine grade alloy enclosure, painted gray
46500104
HD1BD725NG
ATEX Exem
140°F detector, GRP enclosure, natural black
46500026
HD1BE140NN
ATEX Exem
160°F detector, GRP enclosure, natural black
465301
HD1BE160NN
ATEX Exem
190°F detector, GRP enclosure, natural black
465305
HD1BE190NN
ATEX Exem
225°F detector, GRP enclosure, natural black
465304
HD1BE225NN
ATEX Exem
275°F detector, GRP enclosure, natural black
46500031
HD1BE275NN
ATEX Exem
325°F detector, GRP enclosure, natural black
465306
HD1BE325NN
ATEX Exem
360°F detector, GRP enclosure, natural black
46500072
HD1BE360NN
ATEX Exem
450°F detector, GRP enclosure, natural black
465303
HD1BE450NN
ATEX Exd
140°F detector, marine grade alloy enclosure, painted gray
ATEX Exd
ATEX Exd
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Heat Detectors
Explosionproof & Intrinsically Safe
1S
MEDC Series
Specification—HD1 Unit
Certification:
CENELEC EN50014, 19 & 28
Exd IIB T6 (T3 at +125°C), Cert.No. Baseefa 03ATEX0447
Exia IIC T6 (T4 with diodes/resistors), Cert. No. Baseefa
03ATEX0427
Exem II T6, Cert. No. Baseefa 03ATEX0428
UL listed for USA and Canada
– Class I, Div 2, Groups A, B, C & D
– UL Listing No. E252920
GOST 'R' & 'K' Certification: Exd, Exi & Exem versions
Russian Fire Alarm (VNIIPO) approved
Chinese Certification:
CQST – Exd, Exi & Exem versions
Material:
Detector:
Enclosures:
316 stainless steel
Exd – LM25 marine grade alloy
Exia/Exem/UL – GRP (anti-static)
Stainless steel cover screws
316 stainless steel
Optional Guard:
Finish:
Detector:
Enclosures:
Sand blasted
Exd – Epoxy painted gray as
standard or to customer’s
specification Exia/Exem/UL – Self
colored black or epoxy painted to
customer’s specification
Weight:
Exd, 2kg.
Exia/Exem/UL, 1.1kg.
Certified Temperature: –20°C to +125°C Exd (T3) ATEX & GOST ‘R’ only
–20°C to +55°C Exd (T6)/Exem/UL, –55°C to +55°C Exia
Ingress Protection:
IP66 & IP67
Operation:
The detector contact is normally open and CLOSES at alarm
temperature
Listed Temperature Settings:
To select appropriate temperature settings, choose detector at
56°C (100°F) above maximum ambient temperature.
Temperature Setting
Tolerance
Color Code
(°F)
(°C)
(°F)
(°C)
Detector Tip
140
60
+7/-8
±4
Black
160
71
+7/-8
±4
Black
190
88
+7/-8
±4
White
225
107
+7/-8
±4
White
275
135
±10
±6
Blue
325
163
±10
±6
Red
360
182
±10
±6
Red
450
232
±15
±8
Green
600
316
±20
±11
Orange
725
385
±25
±14
Orange
Terminals:
Labels:
Cable Entries:
Resistor:
Diodes:
Exd/Exem/UL: 125V AC – 5A, 125V DC – 0.5A,
48V DC – 1A. Exia: 30V – 300mA
6 x 4mm2 (BK6)
Optional stainless steel tag and duty labels
2 x M20 ISO (ATEX/Exd/Exe/Exi versions)
2 x 1/2" NPT via adaptors (UL version)
2 x M20 ISO (ATEX/Exd/Exe/Exi versions)
2 x 1/2" NPT via adaptors (UL version)
Up to 2 off available in Exd, Exi & UL versions—contact sales office
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1231
1S
Contact Rating:
1S
1S
1232
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Strobe Lights
2S
Hazardous and Non-hazardous
Description
Page No.
Strobe Lights - MEDC Series
SM87 HXB
XB4
XB11
XB12
XB13
XB15
XB16 UL
see
see
see
see
see
see
see
pages
pages
pages
pages
pages
pages
pages
1239–1240
1242–1244
1239–1241
1242–1245
1243–1246
1235–1238
1236–1238
Strobe Lights - Hazard•Gard EX Series
EXFASC
EXR
EXS, EXDS
see page 1247
see pages 1251–1253
see pages 1248–1250
2S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1233
2S
Strobe Lights
Hazardous Locations
Weatherproof
MEDC Series
XB16
XB15 Pipe Mount (with cast guard)
These listed strobes have been designed for use in
potentially explosive atmospheres and harsh environmental
conditions. The enclosures are suitable for use offshore or
onshore, where a lightweight product combined with
corrosion resistance is required.
The housing is manufactured from a U.V. stable, glass
reinforced polyester, with the lens manufactured from a
U.V. stable polycarbonate. Stainless steel screws are used,
ensuring a totally corrosion-free product.
The strobes contain supervisory diode and four wire leads
for fire alarm applications. This strobe is also available UL
1971 (ADA) Listed for hearing impaired applications.
2S
Units can be painted to customer specification and supplied
with identification labels.
Applications:
•
•
•
•
Condition signaling
Security alert
Equipment obstruction warning
Emergency evacuation signaling
Certifications and Compliances:
• UL Listed for USA and Canada
– Hazardous locations for USA and Canada
Class I, Div. 2, Groups A, B, C, D*
UL 1971 compliant version available
– Ordinary locations: Visual Signal Device
• NEMA 4X and 6, IP66 & 67
• Certified temperature
–67°F to +158°F
–55°C to +70°C
Typical Industries:
•
•
•
•
•
•
Utility gas plants
Wastewater treatment plants
Mining
Petroleum refineries
Chemical and petrochemical
Pulp and paper
Features and Benefits:
• Pipe mount with 1/2" NPT entry
• Corrosion resistant GRP enclosure
• XB16 580,000 peak candlepower
XB15 520,000 peak candlepower
• Polycarbonate lens, various colors available†
• 4 wire diode monitored board
• Optional relay initiate
• Optional lens guard
†UL 1971 version available with clear lens only (XB16 only).
*Conforms to UL regulated voltage.
1234
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Strobe Lights
2S
Hazardous Locations
Weatherproof
MEDC Series
XB15
15 Joule Flashing Xenon—Hazardous & Ordinary Locations
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 2, Groups A, B, C, D
Class I, Zones 1 & 2, AExd IIC T5/T6
Certified Ambient
Temperature
-67°F to +158°F
-55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 3 x 1/ 2" NPT or 3 x 3/ 4" NPT
Weight
6–8lb/2.6-3.6kg
Options: Body & lens color, voltages 12–48V DC, 110–254V AC
Certification
Voltage
Lens Color
Ordering Code
Cat. #
Standard Product Configuration
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Red
869400
XB15UL12006RWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Amber
869401
XB15UL12006AWBNN
15 joules, direct mount w/backstrap, x 3/4"
NPT side entries, wire guard, 60 flashes
per minute, natural black finish
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Red
869402
XB15UL12006RWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Amber
869403
XB15UL12006AWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Clear
27600042
XB15UL02406CWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Green
27600043
XB15UL02406GWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Blue
869393
XB15UL02406BWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Red
869398
XB15UL02406RWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Amber
869399
XB15UL02406AWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Clear
27600047
XB15UL02406CWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Green
27600048
XB15UL02406GWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Blue
869394
XB15UL02406BWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Red
869396
XB15UL02406RWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
24V DC
Amber
869397
XB15UL02406AWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Clear
27600052
XB15UL12006CWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Green
27600053
XB15UL12006GWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Blue
869405
XB15UL12006BWBNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Clear
27600057
XB15UL12006CWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Green
27600058
XB15UL12006GWPNN
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
120V AC
Blue
869404
XB15UL12006BWPNN
US: 1-866-764-5454
CAN: 1-800-265-0502
15 joule beacon, 60 flashes per minute,
wire guard, backstrap, 2 x 3/4" NPT
entries, natural black enclosure
15 joule beacon, 60 flashes per minute,
wire guard, pipe mounting, 1 x 3/4" NPT
entry, natural black enclosure
2S
www.crouse-hinds.com
15 joules, pipe mount, 1 x 3/4" NPT entry,
wire guard, 60 flashes per minute, natural
black finish
15 joule beacon, 60 flashes per minute,
wire guard, backstrap, 2 x 3/4" NPT
entries, natural black enclosure
15 joule beacon, 60 flashes per minute,
wire guard, pipe mounting, 1 x 3/4" NPT
entry, natural black enclosure
Copyright© 2013 Eaton’s Crouse-Hinds Business
1235
Strobe Lights
2S
Hazardous Locations
Weatherproof
MEDC Series
XB16 UL
10 Joule Flashing Xenon—Hazardous & Ordinary Locations
Certification
UL Listed for:
cULus, UL 1971 compliant
Class I, Div. 2, Groups A, B, C, D
Certified Ambient
Temperature
-67°F to +158°F
-55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Standard 1 x 1/2" NPT
Weight
2.2lb/1kg
Options
Body & lens color, lens guard,
voltages 12–48V DC, 110–254V AC
2S
Certification
Voltage
Lens
Color
Ordering
Code
Cat. #
Standard Product Configuration
UL 1971 Listed for signaling
devices for the hearing impaired.
Suitable for fire alarm indication.
10 joule beacon, 60 flashes per
minute, lens guard, pipe mounting,
1 x 3/4" NPT entry, natural black
enclosure
UL 1971 compliant
24V DC
Clear
29600023
XB16US02460CYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
120V AC
Blue
869406
XB16UL12060BYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
120V AC
Red
869407
XB16UL12060RYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
120V AC
Amber
869408
XB16UL12060AYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
120V AC
Clear
29600013
XB16UL12060CYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
120V AC
Green
29600014
XB16UL12060GYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
120V AC
Blue
29600011
XB16UL12060BYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
120V AC
Red
29600003
XB16UL12060RYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
120V AC
Amber
29600004
XB16UL12060AYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
24V DC
Green
29600016
XB16UL02460GYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
24V DC
Blue
29600017
XB16UL02460BYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
24V DC
Red
869410
XB16UL02460RYNN
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
24V DC
Amber
869411
XB16UL02460AYNN
1236
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
10 joules, 60 flashes per minute,
1 x 3/4" NPT entry, 240 Cd, lens
guard, natural black finish
10 joule beacon, 60 flashes per
minute, lens guard, pipe mounting,
1 x 3/4" NPT entry, natural black
enclosure
10 joule beacon, 60 flashes per
minute, lens guard, pipe mounting,
1 x 3/4" NPT entry, natural black
enclosure
Strobe Lights
Hazardous Locations
Weatherproof
2S
MEDC Series
Specification—XB15 Unit
Certification: UL Listed for USA and Canada:
– Hazardous locations
Class I, Div. 2, Groups A, B, C, D
Class I, Zone 1, AExd IIC T5/T6
UL listing No. E187894
– Ordinary locations: Visual Signal Device
UL listing No. S8128
CENELEC/ATEX approved
CENELEC EN50014 & EN50018
ATEX Cert. No. Baseefa 04ATEX0009X
Body: Glass reinforced polyester
Lens: Glass
Backstrap: stainless steel 316
Wire Guard (optional): stainless steel wire
Cast Guard (optional): aluminium LM25M
Finish:
Natural black or epoxy painted to customer
specification
Voltage:
24, 48V DC
110, 120, 230, 240, 254V AC
Tube Energy: 15 joules
Electrical Ratings:
DC
AC
Voltage
Current (A) at 60 fpm
Current (A) at 80 fpm
Current (A) at 120 fpm
24
.78
.99
.99
Effective Candlepower
330 (Effective candlepower is the
intensity that would appear to an
observer if the light was burning steadily)
Peak Candlepower
Material:
48
.67
.73
.73
110
0.4
0.4
0.4
120
0.4
0.4
0.4
230
0.2
0.2
0.2
240
0.2
0.2
0.2
254
0.17
0.17
0.17
Tube Life:
>1 × 106 flashes
Flash Rate:
60, 80, 120 fpm
Certified
–67°F to +131°F (–55°C to +55°C) T6
Temperature: –67°F to +158°F (–55°C to +70°C) T5
Weight:
Pipe mount: 5.75 lb/2.6kg; Direct mount: 6.5 lb/3.0kg
Ingress
Protection:
NEMA 4X & 6, IP66 & IP67
Entries:
Supplied as 2 × 3/4" NPT (direct mount) or 3/4"
(pipe mount) as standard
Other options available:
Up to 3 × 1/2" NPT or 3 × 3/4" NPT (direct mount);
1
/2" NPT (pipe mount) — contact sales office to order
Terminals:
Direct mount: 12 x 14AWG
Pipe mount: 8 x 14AWG
520,000 (Peak candlepower is the
maximum light intensity generated by a
flashing light during its light pulse)
Multiplying Factor for Colored Lenses:
Red
Blue
Amber
Green
Yellow
0.15
0.12
0.51
0.49
0.86
Relay Initiate: Available on all units — suitable for 24V DC
supplies only
Labels:
Tag/Duty label option
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
2S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1237
2S
Hazardous Locations
Weatherproof
Strobe Lights
2S
MEDC Series
Specification—XB16UL Unit
Electrical Ratings:
Certification:
For Hazardous Locations and Ordinary Locations
(UL1638) Units
UL Listed for USA and Canada:
– Hazardous locations for USA and Canada
Class I, Div. 2, Groups A, B, C, D
UL listing No. E251185
– Ordinary locations: Visual Signal Device: UL1638
UL listing No. E251185
– Hazardous locations for hearing impaired: UL1971
UL listing No. E251185
Material:
Body: Glass reinforced polyester
Lens: U.V. stable polycarbonate
Lens screws: stainless steel 316
Finish:
Natural black or painted to customer specification
Voltage:
24, 48V DC
110, 120, 230, 240, 254V AC
Conforms to UL regulated voltage output (12V DC,
24V DC, 120V AC, 240V AC)
Certified
Temperature:
–67°F to +158°F (–55°C to +70°C)
Tube Energy:
10 joules
Tube Life:
> 1 × 106 flashes
Weight:
2.2lb/1.0kg
Ingress
Protection:
NEMA 4X & 6, IP66 & IP67
Entries:
Standard 1 × 1/2" NPT pipe mount
Terminals:
8 × 14AWG
Labels:
Tag/Duty label option
DC
AC
Voltage
24
48 110 120 230 240 254
Current (A) at 60 fpm
0.89 0.30 0.38 0.38 0.22 0.22 0.18
Current (A) at 80 fpm
0.89 0.30 0.38 0.38 0.22 0.22 0.18
Current (A) at 120 fpm
0.89 0.30 0.38 0.38 0.22 0.22 0.18
Effective intensity (Cd): 240 at 80 f.p.m.
Peak candlepower: 580,000 (Peak candlepower is the maximum
light intensity generated by a flashing light during its light pulse)
For UL1971 Units Only
DC
AC
Voltage
24
48 110 120 230 240 254
Current (A) at 60 fpm
1.22 1.52 0.38 0.38 0.78 0.78 0.18
Current (A) at 80 fpm
1.22 1.52 0.38 0.38 0.78 0.78 0.18
Current (A) at 120 fpm 1.22 1.52 0.38 0.38 0.78 0.78 0.18
Effective intensity (Cd): 240 at 80 fpm.
Peak candlepower: 580,000 (Peak candlepower is the maximum
light intensity generated by a flashing light during its light pulse)
On UL1971 units, max. current rating is based on in-rush current.
This is why the current ratings are not propotional as with other
beacons/strobes.
UL 1971 On-axis output: 15 Cd.
Note: 24V DC units are cerified for use in regulated 24V DC supplies (16–33V AC).
110/120V DC units are certified for use on regulated 120V AC supplies (96–132V AC).
230/240V DC units are certified for use on regulated 240V AC supplies (192–264V AC).
Multiplying factor for colored lenses:
Red
0.15
Ordering Requirements
Blue
0.12
Amber
0.51
Green
0.49
Yellow
0.86
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1238
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Strobe Lights
2S
Medium Intensity
MEDC Series
SM87 HXB
5 Joule Xenon Strobe—Explosionproof
Certification
UL Listed for:
cULus, CSA, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Alloy
Entries
Up to 2 × 1/2" or 3/4" NPT, M20, M25
Weight
4.4lb/2.0kg approx.
Options
Body & lens color, certification, lens guard,
voltages 24–48V DC,110–254V AC
Certification
Voltage
Lens
Color
Ordering
Code
Cat. #
II
II
II
II
2GD
2GD
2GD
2GD
24V DC
24V DC
240V AC
240V AC
Red
Amber
Red
Amber
813005
813006
813007
813008
SM87HXBAB024RN1R1LNNR
SM87HXBAB024AN1R1LNNR
SM87HXBAB240RN1R1LNNR
SM87HXBAB240AN1R1LNNR
ATEX EX II 2GD
24V DC
Red LED
813009
SM87LEDAB024RN1R1LNNR
UL, cUL Listed, Class I, Div. 1,
Groups C, D
24V DC
Red
869161
UL, cUL Listed, Class I, Div. 1,
Groups C, D
24V DC
Amber
869162
UL, cUL Listed, Class I, Div. 1,
Groups C, D
110V AC
Red
869165
UL, cUL Listed, Class I, Div. 1,
Groups C, D
110V AC
Amber
869166
ATEX
ATEX
ATEX
ATEX
EX
EX
EX
EX
XB11
5 joules, 2 × M20 Entries,
29Cd, Exd IIc
7 joules, 2 × M20 Entries,
39Cd, Exd IIc
192Cd, 2 × M20 Entries,
Exd IIc
SM87HXBAUL024RN3R3LNNR Standard models are in alloy,
red body color, no tag or
duty labels, 2 × 1/2" NPT
SM87HXBAUL024AN3R3LNNR entries, 29Cd, 60 flashes
per minute
SM87HXBAUL110RN3R3LNNR Standard models are in alloy,
red body color, no tag or
duty labels, 2 × 1/2" NPT
SM87HXBAUL110AN3R3LNNR entries, 32Cd, AExd IIB, 60
flashes per minute
5 Joule Xenon Strobe—Hazardous Locations
cULus, ATEX
Class I, Div. 2, Groups C, D
Class I, Zones 1 & 2, AExd IIB T5
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
UL, cUL Listed, Class
UL, cUL Listed, Class
UL, cUL Listed, Class
UL, cUL Listed, Class
UL, cUL Listed, Class
ATEX EX II 2GD
ATEX EX II 2GD
ATEX EX II 2GD
I,
I,
I,
I,
I,
Div.
Div.
Div.
Div.
Div.
2,
2,
2,
2,
2,
2S
Certification
UL Listed for:
Entries
2 × 1/ 2" NPT, 20mm
Weight
2.6lb/1.2kg
Options
Body & lens color, voltages 24V DC,
110–254V AC
Certification
ATEX EX II 2GD
Standard Product
Configuration
Body
Color
Lens
Color
Ordering
Code
Cat. #
D 24V DC
D 24V DC
D 24V DC
D 24V DC
D 110V AC
24V DC
24V DC
24V DC
Red
Red
Natural Black
Red
Red
Natural Black
Natural Black
Natural Black
Red
Amber
Clear
Clear
Red
Red
Amber
Red
869171
869172
869173
869174
869175
811101
811102
811103
XB11UL02406RNBNNNR
XB11UL02406ANBNNNR
XB11UL02406CNBNNNN
XB11UL02406CNBNNNR
XB11UL11006RNBNNNR
XB11B02406RNBNNNN
XB11B02406ANBNNNN
XB11B24006RNBNNNN
24V DC
Natural Black
Amber
811104
XB11B24006ANBNNNN
Voltage
Groups
Groups
Groups
Groups
Groups
C,
C,
C,
C,
C,
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Standard Product
Configuration
No tag or duty
labels, 2 × 1/ 2" NPT
entries, 60 flashes
per minute
GRP, natural black
body, no tag or duty
labels, backstrap
mounting, 2 × M20
entries, 60 flashes
per minute
Copyright© 2013 Eaton’s Crouse-Hinds Business
1239
2S
Medium Intensity
Strobe Lights
MEDC Series
Specification—SM87HXB Unit
DC
2S
Certification: UL Listed for USA and Canada for Class I, Div. 1,
Groups C, D and Class I, Zone 1. Listing No. E187894.
CSA Certification:
to C22.2, Nos. 0, 0.4, 0.5, 9, 30-M 1986,
94-M91, 137-M 1981, Class I, Div. 1, Group 0,
Enclosure 3/4, Cert. No. 96406.
ATEX approved:
EN50014, EN50018, EN50019
Cert. No. Baseefa 03ATEX0222, Exd IIC T6
Material:
LM25 TF Marine Grade Alloy
Lens: Toughened Glass
Finish:
Epoxy paint finish as standard or to customer's
specification
Weight:
5.5lb/2.5kg. approx.
Certified
Standard unit SM87 HXB:
Temperature:
–67°F to +158°F, –55°C to +70°C
High temperature unit:
–67°F to +185°F, –55°C to +85°C
Ingress
NEMA 4X & 6, IP66 & 67
Protection:
4 off suitable for up to 14AWG conductor size
Terminals:
Labels:
Duty & tag labels optional
Entries:
Up to 4 off 1/2" or 3/4" NPT
Voltage
Tube Energy
(joules)
AC 50/60Hz
120
240
24
48
110
5
5
6
7
7
8
Peak Current
Consumption
(mA)
320
170
250
275
135
150
Power Consumption
(Watts)
7.2
7.6
25
27
27
35
Effective
Intensity (Cd)
29
32
39
39
44
Peak Candle Power
29
22213 22213 25061 30187 30187 34174
The above figures (Cd) are for a clear lens @ 1Hz flash rate.
For Colored Lenses
Color
Multiplying
Factor
Red
Blue
Amber
Green
Yellow
0.15
0.12
0.51
0.49
0.86
The photometric data has been independently verified.
A report is available if required.
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1240
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
254
Copyright© 2013 Eaton’s Crouse-Hinds Business
Medium Intensity
Strobe Lights
2S
MEDC Series
Specification—XB11 Unit
Certification:
Material:
UL Listed for USA and Canada
– Hazardous locations:
Class I, Div. 2, Groups C, D
Class I, Zones 1 & 2, AExd IIB T5
UL Listing No. E187894
– Ordinary locations: Visual Signal Device
UL Listing No. S8128
ATEX approved:
Exd IIB T5/T6
Cert. No. 99 ATEX 2195X
CENELEC EN50014 and EN50018
Body: Glass reinforced polyester
Lens: Glass
Cover Screws + Backstrap: Stainless steel 316
Finish:
Natural black or painted to customer
specification
Weight:
5.5lb/2.5kg
Certified
Temperature:
Standard unit SM87 HXB: –67°F to +158°F,
–55°C to +70°C
–67°F to +158°F, –55°C to +70°C
High temperature unit:
–67°F to +185°F, –55°C to +85°C
AC 50/60Hz
110
240
Voltage
DC
24
XB11
Tube Energy
(joules)
5
5
5
Peak Current
Consumption
(mA)
320
100
60
Effective
Intensity (Cd)
29
29
29
Peak Candle Power
22213
22213
22213
Power Consumption (Watts)
8
11
18
The Cd figures are for a clear lens @ 1Hz flash rate.
For Colored Lenses
Color
Red
Blue
Amber
Green
Yellow
Multiplying
Factor
0.15
0.12
0.51
0.49
0.86
The photometric data has been verified by BSI.
A report is available if required.
Ingress Protection: NEMA 4X & 6, IP66 & 67
Terminals:
6 off suitable for up to 14 AWG conductor size
Labels:
Duty/tag label optional
2 × 1/2" NPT, 20mm
Strobe/Sounder
Unit:
The beacon may be combined with an MEDC
Sounder to create a visual/audible alarm.
Contact MEDC for price and specification.
2S
Entries:
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1241
2S
High Intensity for Outdoor Use
Strobe Lights
MEDC Series
XB4
21 Joule Xenon Strobe—Explosionproof
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1, AExd IIB T4, T5
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection NEMA 4X & 6
IP66 & 67
Material
Alloy
Entries
Up to 3 × 1/2" or 3/4" NPT, 20mm, 25mm
Weight
14.5lb/6.6kg
Options
Body & lens color, lens guard, certification,
voltages 24V DC, 110V AC & 240V AC
Voltage
Lens
Color
Ordering
Code
Cat. #
ATEX Approved Ex II 2G
24V DC
Red
814001
XB4BB8D2B3B06AN0RN1R
ATEX Approved Ex II 2G
240V AC
Red
814002
XB4BH8D2B3B06AN0RN1R
UL, cUL Listed, Class I, Div. 1,
Groups C, D
24V DC
Red
869121
XB4ULB8D2E3E06ANRN1R
Certification
UL, cUL Listed, Class I, Div. 1,
Groups C, D
UL, cUL Listed, Class I, Div. 1,
Groups C, D
UL, cUL Listed, Class I, Div. 1,
Groups C, D
XB12
24V DC
Amber
869122
XB4ULB8D2E3E06ANAN1R
110V AC
Red
869125
XB4ULE8D2E3E06ANRN1R
110V AC
Amber
869126
XB4ULE8D2E3E06ANAN1R
Standard Product
Configuration
21 joules, 2 × M20 entries,
355Cd, 60 flashes per
minute, no labels, red finish
Marine grade alloy, 2 × 3/4"
NPT entries, no lens guard,
60 flashes per minute,
red finish
21 Joule Xenon Strobe—Hazardous Locations
Certification
UL Listed for:
cULus, ATEX
2S
Class I, Div. 2, Groups C, D
Class I, Zones 1 & 2, AExd IIB T4
Certification
ATEX
ATEX
ATEX
ATEX
Approved
Approved
Approved
Approved
Ex
Ex
Ex
Ex
II
II
II
II
2G
2G
2G
2G
UL, cUL Listed, Class I, Div. 2,
Groups C, D
UL, cUL Listed, Class I, Div. 2,
Groups C, D
UL, cUL Listed, Class I, Div. 2,
Groups C, D
UL, cUL Listed, Class I, Div. 2,
Groups C, D
1242
www.crouse-hinds.com
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 2 × 1/2" NPT, 20mm
Weight
15.5lb/7.0kg
Options
Body & lens color, lens guard, certification,
voltages 24V DC, 110–254V AC
Voltage
Lens
Color
Ordering
Code
Cat. #
24V DC
24V DC
240V AC
240V AC
Red
Amber
Red
Amber
812101
812102
812103
812104
XB12B02406RNBNNNN
XB12B02406ANBNNNN
XB12B24006RNBNNNN
XB12B24006ANBNNNN
24V DC
Red
869181
XB12UL02406RNBNNNR
24V DC
Amber
869182
XB12UL02406ANBNNNR
110V AC
Red
869185
XB12UL11006RNBNNNR
110V AC
Amber
869186
XB12UL11006ANBNNNR
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Standard Product
Configuration
21 joules, 2 × M20 entries,
355Cd, 60 flashes per minute,
no labels, black body
Red painted GRP, no tag or
duty labels, 2 × 1/2" NPT, 60
flashes per minute, 355 Cd
High Intensity for Outdoor Use
Strobe Lights
2S
MEDC Series
XB13
10 Joule Flashing Xenon—Weatherproof and Heavy Duty
Certification
UL Listed for:
Weatherproof
IP66 & 67
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 3 × 20mm via knockouts
Weight
1.1kg
Options
Body & lens color, lens guard,
voltages 12–24V DC, 115–230V AC
Certification
Voltage
Lens
Color
Ordering
Code
Cat. #
Weatherproof, IP66 & 67
24V DC
Red
813101
XB13024RNNN
Weatherproof, IP66 & 67
24V DC
Amber
813102
XB13024ANNN
Weatherproof, IP66 & 67 230V AC
Red
813103
XB13230RNNN
Weatherproof, IP66 & 67 230V AC
Amber
813104
XB13230ANNN
Standard Product Configuration
Dust-tight and weatherproof, uncertified, no tag or duty
labels, 3 × 20mm entries via knockouts, 60 flashes per
minute, dual and single flash modes, natural red GRP
2S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1243
2S
High Intensity for Outdoor Use
Strobe Lights
MEDC Series
Specification—XB4 Unit
Certification:
DC
AC 50/60Hz
UL Listed for USA and Canada
– Hazardous locations:
Class I, Div. 1, Groups C, D
Class I, Zone 1, AExd IIB T4
UL Listing No. E187894
– Ordinary locations: Visual Signal Device
UL Listing No. S8128
ATEX approved:
Exd IIC T5
Cert. No. Baseefa 02ATEX0224X
Voltage
24
110
240
Tube Energy
(joules)
21
21
21
Peak Current
Consumption
(mA)
1400
350
185
355
123691
355
355
123691
123691
Materials:
LM25TF Marine Grade Alloy body
Grade 316 ANC4B Stainless Steel body
Toughened Wellglass
Note:
Finish:
Red epoxy paint finish as standard or to
customer's specification
Weight:
LM25: 14.5lb/6.6kg.
Stainless Steel: Add 18.5lb/8.5kg.
Certified
Temperature:
–67°F to +158°F
–55°C to +70°C
Effective Intensity (Cd)
Peak Intensity (Cd)
The above figures (Cd) are for a clear lens @ 1Hz flash rate.
For Colored Lenses
Color
Multiplying
Factor
(Approximate)
Red
Blue
Amber
Green
Yellow
0.15
0.12
0.51
0.49
0.86
The photometric data has been independently verified. A report is
available if required.
2S
Ingress Protection: NEMA 4X & 6, IP66 & 67
Terminals:
8 off suitable for up to 8 AWG conductor size
Entries:
Up to 3 × 1/2" or 3/4" NPT, 20mm, 25mm
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1244
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
High Intensity for Outdoor Use
Strobe Lights
2S
MEDC Series
Specification—XB12
Certification:
Materials:
Finish:
Weight:
DC
110
240
21
21
21
Peak Current
Consumption
(mA)
1400
350
185
Effective
Intensity (Cd)
355
355
355
123691
123691
123691
33.6
38.5
44.4
Voltage
XB12
Tube Energy
(joules)
Body: Glass reinforced polyester
Lens: Toughened Glass
Cover Screws + Backstrap:
Stainless steel 316
Peak Intensity (Cd)
Power Consumption
(Watts)
Natural black or painted to customer
specification
15.5 lb/7.0kg
Certified Temperature: –67°F to +158°F (–55°C to +70°C)
hazardous locations
–67°F to +131°F (–55°C to +55°C)
ordinary locations
Ingress Protection:
NEMA 4X and 6, IP66 & 67
Terminals:
6 off suitable for up to 10 AWG conductor
size
Labels:
Duty/tag label optional
Entries:
2 × 1/ 2" NPT, 20mm
AC 50/60Hz
24
UL Listed for USA and Canada
– Hazardous locations:
Class I, Div. 2, Groups C, D
Class I, Zone 1 & 2, AExd IIB T4/T5
UL Listing No. E187894
– Ordinary locations: Visual Signal Device
UL Listing No. S8128
ATEX approved:
Exd IIB T4/T5
Cert. No. 99 ATEX 2196
The Cd figures are for a clear lens @ 1Hz flash rate.
For Colored Lenses
Color
Red
Blue
Amber
Green
Yellow
Multiplying
Factor
0.15
0.12
0.51
0.49
0.86
The photometric data has been verified by BSI. A report is available
if required.
2S
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1245
2S
Strobe Lights
High Intensity for Outdoor Use
MEDC Series
Specification—XB13 Unit
Materials:
UV stable glass reinforced polyester body
UV stable polycarbonate cover/lens
Retained stainless steel cover screws
Finish:
Self colored red as standard or epoxy coated
to customer’s specification
Tube Energy:
10 joules (second flash 7.5 joules)
Weight:
1.1kg
Operating Temperature: –55°C to +70°C
Ingress Protection:
IP66 & IP67
Tube Life:
>1 × 106 flashes
Voltage:
12V DC, 24V DC, 115V AC, 230V AC
Current Consumption:
Voltage
12V DC
24V DC
115V AC
230V AC
Tube Type:
Xenon discharge
Lens Color:
Various colors available
Current
Consumption
1.4A
650mA
180mA
100mA
Terminals:
8 x 2.5mm2
Flash Rate:
1 flash per second
Dual Flash Rate:
Time between dual flashes = 0.5 seconds
Charging time = 1 second
Cycle repeats every 1.5 seconds
Labels:
Duty and tag labels available
Tube Type:
Up to 3 × M20 via knockouts
Intensity:
Effective intensity 220 Cd. Peak intensity
75,000 Cd.
(Figures are for clear lens at 1Hz flash rate).
For Colored Lenses
Color
Red
Blue
Amber
Green
Yellow
Multiplying Factor
0.15
0.12
0.51
0.49
0.86
Ordering Requirements
2S
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1246
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Fire Alarm Strobe Light
HAZARD•GARD® Series
Cl. I, Div. 1, Groups C, D
Cl. I, Zone 1 and 2, Group IIB
Cl. II, Div. 1, Groups E, F, G
Class III
UL and cUL Listed
NEMA 4X; IP66
2S
The Hazard•Gard® EXFASC Series is a visual fire alarm signaling
device for hazardous areas. The EXFASC Series strobes are UL
1971 Listed for indoor signaling applications for the hearing impaired
in non-sleeping areas. They are also UL Listed for Type 3R, 4X
installations. The strobes are available for pendant, wall and ceiling
mounts.
The EXFASC Series Fire Alarm Explosionproof Strobe contains a
supervisory diode for use in fire alarm applications. Under normal
operation the diode is reversed biased, meaning it blocks voltage
from being applied to the strobe light and prevents it from lighting.
When a fire-initiating device such as a smoke alarm is activated, the
diode’s polarity is reversed through a fire alarm panel. The diode
becomes forward biased, allowing voltage to the device and
activating the strobe.
Applications:
• Visual fire alarm signaling device for hazardous areas
Typical Industries:
•
•
•
•
•
•
•
Energy exploration
Utilities
Wastewater treatment plants
Pulp and paper plants
Petrochemical plants
Petroleum refineries
Oil rigs
Temperature Performance Data:
See page 1203
Features and Benefits:
Ratings:
• Meets NFPA requirements for fire safety warning devices
• State of the art electronic design (full wave rectified design)
Low current draw is efficient
24V DC regulated full wave rectified
Limited in-rush current favorable to other fire alarm system
components
Proven, reliable circuitry designed specifically for use with fire
alarm control panels
• Available in pendant, wall and ceiling mount
• Strobe light produces 65 flashes per minute
• Factory sealed—no external seals required
• Quick connect—strobe fixture threads onto mounting module for
easy installation
• Small compact size—ceiling mount is 133/ 4-inch long
• 16–33V DC
• Operating Current: 1.08–0.83 amps
• Peak Candlepower: 800,000
Certifications and Compliances:
Step 2 - Order Mounting Module
•
•
•
•
•
•
Catalog Number
Hub Size
Mounting Style
EVMP2
EV22 & EV87
EV22
EVMJ4
3
/4"
3
/4"
3
/4"
11/4"
Pendant
Wall
Ceiling
Stanchion
• 3/4-inch NPT pendant, ceiling and wall mount
Ordering Information:
Step 1 - Order Strobe Type
Catalog Number
Voltage
Lens Color
FIRE ALARM RATED EXPLOSIONPROOF STROBE
24 VDC regulated
EXFASC301/16 33
Clear
full wave rectified
NEMA Rating
3R, 4X
2S
Class I, Division 1, Groups C, D
Class I, Zones 1 and 2, Group IIB
Class II, Division 1, Groups E, F, G
Class III
UL 1638 and 1203 Listed
UL 1971 Listed for indoor visual signaling for the hearing impaired
in non-sleeping areas
• cUL Listed C22.2 No. 205
• NEMA 4X watertight, IP66
Hub Size:
Materials & Finishes:
•
•
•
•
•
Body, mounting modules and guard—Copper-free aluminum
Globe—Heat and impact-resistant glass
Gaskets—Silicone
External hardware—Stainless steel
Internal components—Solid-state electronics in a moistureresistant and heat-dissipating epoxy
• Epoxy powder coated for corrosion resistance
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1247
2S
Cl. I, Div. 1, Groups C, D
Cl. I, Zone 1 and 2, Group IIB
Cl. II, Div. 1, Groups E, F, G
Class III
Explosionproof Strobe Lights
HAZARD•GARD® Series
UL and cUL Listed
NEMA 4X; IP66
The Hazard•Gard EXS and EXDS Series Explosionproof Strobe Lights are designed for
installation indoors and outdoors in locations which are hazardous due to the presence of
flammable vapors or gases, ignitible dusts or ignitible fibers and flyings. The units are UL
Listed for Type 3R and 4X installations. The 120V and 24V DC models are Marine Rated.
The strobes are available for pendant, wall, stanchion and ceiling mounts, and come in six
different globe colors.
The EXDS Series is diode polarized for use in electrically supervised circuits. Electrically
supervised circuits are typically used in life-safety or security applications.
Under normal operation the diode is reversed biased, meaning it blocks voltage from being
applied to the strobe and prevents it from lighting. When an initiating device such as a
smoke detector is activated, the diode’s polarity is reversed through a circuit panel. The
diode becomes forward biased, allowing voltage to the device and activating the strobe.
Applications:
•
•
•
•
•
Condition signaling
Equipment obstruction warning
Security alert
Emergency evacuation signaling
In areas where audible signals cannot be heard
Materials and Finishes:
Typical Industries:
•
•
•
•
•
•
•
•
•
•
•
Body, mounting modules and guard—Copper-free aluminum
Globe—Heat and impact-resistant glass
Gaskets—Silicone
External hardware—Stainless steel
Internal components—Solid-state electronics in a moistureresistant and heat-dissipating epoxy
• Epoxy powder coated for corrosion resistance
Utility gas plants
Petroleum refineries
Wastewater treatment plants
Chemical and petrochemical
Mining
Pulp and paper
Features and Benefits:
Ratings:
• Strong strobe signal that produces 65 flashes per minute
• Compact design will not obstruct in low ceiling or small areas,
ceiling mount is only 133/4"–inch long
• Quick connect—strobe fixture threads onto mounting module for
easy installation
• Factory sealed—no external seals required
• Available in pendant, wall, stanchion and ceiling mount
• Available in six different globe colors—clear, red, blue, amber,
green and magenta
• Silicone gasket seals out dirt and moisture
• 120V AC (EXS), 12–48V DC (EXSNM) and 24V DC nominal, voltage
operating range is 16–33V DC (EXDS)
• Operating Current: 0.10 amps at 120V AC
1.2–3.8 amps at 12–48V DC
0.8 amps at 24V DC
• Peak Candlepower: 800,000
Hub Size:
• 3/4-inch NPT pendant, ceiling and wall mount
• 11/4-inch NPT stanchion mount
2S
Certifications and Compliances:
•
•
•
•
•
•
•
•
Class I, Division 1, Groups C, D
Class I, Zones 1 and 2, Group IIB
Class II, Division 1, Groups E, F, G
Class III
UL and cUL 1638, UL 1203 and UL 844 Listed
1598A Marine Listed (120V AC and 24V DC only)
cUL Listed C22.2 No. 205
NEMA 4X watertight, IP66
1248
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Explosionproof Strobe Lights
HAZARD•GARD® Series
Cl. I, Div. 1, Groups C, D
Cl. I, Zone 1 and 2, Group IIB
Cl. II, Div. 1, Groups E, F, G
Class III
2S
UL and cUL Listed
NEMA 4X; IP66
Ordering Information:
Step 2 - Order Mounting Module
Step 1 - Order Strobe Type
Cat. #
Explosionproof Strobes
EXS301A/120
EXS301B/120
EXS301C/120
EXS301G/120
EXS301M/120
EXS301R/120
EXSNM301A/12 48
EXSNM301B/12 48
EXSNM301C/12 48
EXSNM301G/12 48
EXSNM301M/12 48
EXSNM301R/12 48
Voltage
120V AC
120V AC
120V AC
120V AC
120V AC
120V AC
12–48V DC
12–48V DC
12–48V DC
12–48V DC
12–48V DC
12–48V DC
Lens Color
NEMA Rating
Amber
Blue
Clear
Green
Magenta
Red
Amber
Blue
Clear
Green
Magenta
Red
3R
3R
3R
3R
3R
3R
3R
3R
3R
3R
3R
3R
4X,
4X,
4X,
4X,
4X,
4X,
4X
4X
4X
4X
4X
4X
Marine
Marine
Marine
Marine
Marine
Marine
Amber
Blue
Clear
Green
Magenta
Red
3R
3R
3R
3R
3R
3R
4X,
4X,
4X,
4X,
4X,
4X,
Marine
Marine
Marine
Marine
Marine
Marine
Cat. #
Hub Size
Mounting Style
EVMP2
EV22 and EV87
EV22
EVMJ4
/4"
3
/4"
3
/4"
11/4"
Pendant
Wall
Ceiling
Stanchion
3
Diode Polarized Explosionproof Strobes
EXDS301A/24
EXDS301B/24
EXDS301C/24
EXDS301G/24
EXDS301M/24
EXDS301R/24
24V
24V
24V
24V
24V
24V
DC
DC
DC
DC
DC
DC
Temperature Performance Data:
Class I,
Div. 1, 2,
Ambient
Groups C, D
Class II,
Class II, Class III,
Max.
Supply Class I, Zone 1, Class III, Div. 1, Div. 2,
Temp.
Wire
Group II B
Groups E, F, G Groups F, G
40°C
55°C
75°C
90°C
T6 (85°C)
T5 (100°C)
T4A (120°C)
T4 (135°C)
T4A (120°C)
T4 (135°C)
EXS Series Strobe Light Voltage 120V AC (Marine Listed)
40°C
55°C
65°C
75°C
90°C
105°C
T6 (85°C)
T6 (85°C)
T6 (85°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
EXSNM Series Strobe Light Voltage 12–48V DC (Not Marine
Listed)
40°C
55°C
65°C
75°C
90°C
105°C
T6 (85°C)
T6 (85°C)
T6 (85°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
EXDS Series Strobe 40°C Light-Diode Polarized Voltage 24V DC
(Marine Listed)
40°C
55°C
75°C
90°C
T6 (85°C)
T5 (100°C)
T4A (120°C)
T4 (135°C)
T4A (120°C)
T4 (135°C)
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
2S
EXFASC Series Fire Alarm Voltage 24V DC Regulated Full Wave
Rectified (Operating Range 16–33V DC) (Marine Listed)
1249
2S
Explosionproof Strobe Lights
HAZARD•GARD® Series
Cl. I, Div. 1, Groups C, D
Cl. I, Zone 1 and 2, Group IIB
Cl. II, Div. 1, Groups E, F, G
Class III
UL and cUL Listed
NEMA 4X; IP66
Dimensions
2S
In Inches:
Wall Mount
Ceiling Mount
Stanchion Mount
Pendant Mount
Net Luminaire Weights:
Type
Luminaire Housing with Guard
lbs.
Type
lbs.
Add mounting modules:
Pendant
Ceiling
Wall
Stanchion
1.0
1.0
4.5
2.5
1250
www.crouse-hinds.com
11.0
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Explosionproof Rotating Beacons
HAZARD•GARD® Series
UL and cUL Listed
Cl. I, Div. 1, Groups C, D
Cl. I, Zone 1 and 2, Group IIB NEMA 4X; IP66
Cl. II, Div. 1, Groups E, F, G
Class III
2S
Eaton's Crouse-Hinds Hazard•Gard EXR Series Explosionproof
Rotating Beacons are designed for installation in hazardous
locations, such as manufacturing plants, heavy industrial facilities,
refineries, chemical, petrochemical, pharmaceutical and offshore
drilling platforms.
The units are UL Listed for Type 3R, 4X and marine installations. The
rotating beacons are available for pendant, wall, stanchion and
ceiling mounts, and come in six different globe colors.
The EXDR Series Explosionproof Rotating Beacon is diode polarized
for use in standard 24–28V DC electrical circuits or in electrically
supervised circuits. Electrically supervised circuits are typically used
in life safety or security applications.
Under normal operation in an electrically supervised circuit, the
diode is reversed biased, meaning it blocks voltage from being
applied to the rotating beacon and prevents it from lighting. When a
warning detecting device is activated, the diode’s polarity is
reversed through a circuit panel. The diode becomes forward
biased, allowing voltage to the device and activating the rotating
beacon.
Applications:
•
•
•
•
•
•
Security alert
Equipment obstruction warning
Obstacle warning
Status indication of a process
Areas under construction
Supplement audible signaling or off limits
Materials and Finishes:
•
•
•
•
•
Body, mounting modules and guard—Copper-free aluminum
Globe—Heat and impact-resistant glass
Gaskets—Silicone
External hardware—Stainless steel
Internal components—Solid-state electronics in
a moisture-resistant and heat-dissipating epoxy
• Epoxy powder coated for corrosion resistance
Typical Industries:
•
•
•
•
•
•
Utility gas plants
Pharmaceutical plants
Wastewater treatment plants
Refineries
Chemical plants
Mining
Ratings:
Features and Benefits:
Hub Size:
• 3/4-inch NPT pendant, ceiling and wall mount
• 11/4-inch NPT stanchion mount
2S
• Powerful halogen rotating beacon emits bright light to provide
critical visual warning
• Available in pendant, wall, stanchion and ceiling mount
• Available in six different globe colors—amber, blue, clear, green,
magenta and red
• Beacon produces 75 rotations per minute
• Factory sealed—no external seals required
• Quick connect—strobe fixture threads onto mounting module for
easy installation
• 120V AC (EXR) and 24–28V DC (EXDR)
• Operating Current: 0.382 amps at 120V AC
0.8 amps at 24–28V DC
• Peak Candlepower: 3328 (EXR)
2838 (EXDR)
Certifications and Compliances:
•
•
•
•
•
•
•
Class I, Division 1, Groups C, D
Class II, Division 1, Groups E, F, G
Class I, Zones 1 & 2, Group IIB
Class III
UL and cUL 1638, UL 1203 and UL 844 Listed
1598A Marine Listed
NEMA 4X watertight, IP66
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1251
Explosionproof Rotating Beacons
HAZARD•GARD® Series
2S
Cl. I, Div. 1, Groups C, D
Cl. I, Zone 1 and 2, Group IIB
Cl. II, Div. 1, Groups E, F, G
Class III
UL and cUL Listed
NEMA 4X; IP66
Ordering Information:
Step 2 - Order Mounting Module
Step 1 - Order Rotating Beacon Type
Cat. #
Voltage
Explosionproof Rotating Beacons
Lens Color
EXR301A/120
EXR301B/120
EXR301C/120
EXR301G/120
EXR301M/120
EXR301R/120
Amber
Blue
Clear
Green
Magenta
Red
3R,
3R,
3R,
3R,
3R,
3R,
4X,
4X,
4X,
4X,
4X,
4X,
Marine
Marine
Marine
Marine
Marine
Marine
Diode Polarized Explosionproof Rotating Beacons
EXDR301A/24 28
24–28V DC
Amber
EXDR301B/24 28
24–28V DC
Blue
EXDR301C/24 28
24–28V DC
Clear
EXDR301G/24 28
24–28V DC
Green
EXDR301M/24 28
24–28V DC
Magenta
EXDR301R/24 28
24–28V DC
Red
3R,
3R,
3R,
3R,
3R,
3R,
4X,
4X,
4X,
4X,
4X,
4X,
Marine
Marine
Marine
Marine
Marine
Marine
120V
120V
120V
120V
120V
120V
AC
AC
AC
AC
AC
AC
NEMA Rating
Cat. #
Hub Size Mounting Style
EVMP2
EV22 & EV87
EV22
EVMJ4
/4"
/4"
3
/4"
11/4"
3
3
Pendant
Wall
Ceiling
Stanchion
Temperature Performance Data:
Ambient
Max.
Temp.
Supply
Wire
Class I,
Div. 1, 2,
Groups C, D
Class I, Zone 1,
Group IIB
EXR Series Rotating Beacon Voltage 120V AC
40°C
55°C
65°C
75°C
90°C
105°C
T6 (85°C)
T5 (100°C)
T5 (100°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
EXR Series Rotating Beacon—Diode Polarized Voltage 24–28V DC
40°C
55°C
65°C
75°C
90°C
105°C
T6 (85°C)
T6 (85°C)
T6 (85°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
2S
Description
1252
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Class II,
Class III,
Div. 1,
Groups E, F, G
Class II,
Class III,
Div. 2,
Groups F, G
Explosionproof Rotating Beacons
HAZARD•GARD® Series
Cl. I, Div. 1, Groups C, D
Cl. I, Zone 1 and 2, Group IIB
Cl. II, Div. 1, Groups E, F, G
Class III
UL and cUL Listed
NEMA 4X; IP66
2S
Dimensions
In Inches:
Ceiling Mount
Stanchion Mount
Pendant Mount
2S
Wall Mount
Net Luminaire Weights:
Type
lbs.
Luminaire Housing with Guard
11.0
Type
Add mounting modules:
Pendant
Ceiling
Wall
Stanchion
lbs.
1.0
1.0
4.5
2.5
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1253
2S
2S
1254
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Steady-On Beacons
3S
Hazardous
Description
Page No.
Steady-On Beacons - MEDC Series
see
see
see
see
see
see
see
FB4
FB11 UL
FB12 UL
FB15
FL4
SM87 LU3
SM87 LU1
pages
pages
pages
pages
pages
pages
pages
1257–1258
1259–1261
1259–1261
1260–1262
1257–1258
1263–1264
1263–1264
Steady-On Beacons - Hazard•Gard EX Series
see pages 1265–1267
EXSO, EXDSO
Steady-On Beacons - Compact Fluorescent
see pages 1268–1269
VF
3S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1255
Steady-On Beacons
3S
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
NEMA 4X
IP66 & IP67
MEDC Series
FB15 Direct Mount
(with wire guard)
FB15 Pipe Mount
(with cast guard)
The units are UL Listed for Type 3R, 4X and marine installations. The
steady-on beacons are available for pendant, wall, stanchion and
ceiling mounts, and come in six different globe colors.
Typical industrial and commercial applications include food
processing plants, refineries, mines, tankers, laboratories, sewage
treatment plants, off-shore oil rigs, water and filtration plants and
chemical plants. The diode polarized steady-on beacon is used in
electrically supervised circuitry for life-safety or security applications.
Certifications and Compliances:
•
•
•
•
•
•
•
Class I, Division 1, Groups C, D
Class I, Zone 1 & 2, Group IIB
Class II, Division 1, Groups E, F, G
Class III
UL and cUL 1638, UL 1203 and UL 844 Listed
1598A Marine Listed
NEMA 4X watertight, IP66
Applications:
3S
•
•
•
•
•
Safety lighting
Continuous source to communicate
Obstacle warning
Exit or entrance lights
For identifying the location of safety equipment
such as showers or emergency telephones
Typical Industries:
•
•
•
•
•
•
Chemical plants
Storage handling
Dust conveyor systems
Energy exploration
Textile mills
Flour and feed mills
1256
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
Steady-On Beacons
NEMA 4X
IP66 & IP67
3S
MEDC Series
FB4
100 Watt Steady Incandescent Light - Explosionproof
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1, AExd IIB T4
Certified Ambient Temperature –67°F to +131°F
–55°C to +55°C
Certification
UL, cUL Listed, Class I,
Div. 2, Groups C, D
FL4
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Alloy
Entries
Up to 3 × 1/ 2" or 2 × 3/ 4" NPT
Weight
13lb/6.4kg
Options:
Body & lens color, lens guard,
certification,
voltage 120V AC only
Ordering Code
17800002
Cat. #
Standard Product Configuration
FB4EUL8U1N100B1N1G
Marine grade alloy, 120V AC, 100W bulb (not included)
blue lens, lens guard, no labels, gray finish
13–39 Watt Steady Fluorescent Light—Explosionproof
Certification
UL Listed for:
UL, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1, AExd IIC T5
Certified Ambient Temperature –67°F to +158°F
–55°C to +70°C
Certification
NEMA 4X & 6
IP66 & 67
Material
Alloy
Entries
Up to 3 × 1/ 2" NPT or 2 × 3/ 4" NPT
Weight
14.5lb/6.6kg
Options:
Body & lens color, lens guard,
certification, voltages 24V DC,
120V, 240V AC
Ordering Code
27800006
Cat. #
Standard Product Configuration
FL4BUL8U2M3M13R1N1RZ
Marine grade alloy, 24V DC, 2 x ½" NPT entries, 13W tube (not
included), red lens, lens guard, red finish, one certified plug
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1257
3S
UL Listed, Class I,
Div. 2, Groups C, D
Ingress Protection
3S
Steady-On Beacons
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
NEMA 4X
IP66 & IP67
MEDC Series
Specification—FL4 and FB4 Units
FL4 Lamp Details
Unit Type
Lamp Type
Lamp Ref.
Holder Type
FL4 DC
Osram Dulux D/E 13W
DD/E 13/XX
G24q-1
Philips PLC 13W
PLC 13 P4
G24q-1
Osram Dulux D 13W
DD 13
G24d-1
FL4 AC
Philips PLC 13W
PLC 13
G24d-1
Osram Color XX = (21 = Cool white) ( 31 = Warm white) (41 =
Interna)
Temperature Ratings
Certification:
UL Listed for USA and Canada
– Hazardous locations:
Class I, Div. 1, Groups C, D
Class I, Zone 1, AExd IIB T4/T5
UL Listing No. E187894
– Ordinary locations: Visual-Signal Device (FL4 only).
UL Listing No. S8128.
ATEX approved:
Exd IIC
Certificate No. Baseefa 02ATEX0224X
Material:
LM25TF Marine Grade Alloy body
Grade 316 ANC48 Stainless Steel body
Toughened Wellglass
Models:
FL4: Up to 3 x 13 Watt PL compact
fluorescent lamps
FB4: 100 watt GLS incandescent lamps. E27 holder
as standard
Finish:
Gray epoxy paint finish as standard or to customer's
specification
Voltage:
FL4: 24V DC, 120V AC, 240V AC ± 10% 50/60hz.
FB4: 120V AC ± 10% 50/60hz.
Weight:
FL4: 14–17lb/6.5–7.9kg (add 19lb/8.4kg for
stainless steel)
FB4: 13lb/6.4 kg
Certified
FL4: –4°F to +131°F (–20°C to + 55°C)
Temperature: FB4: –67°F to +131°F (–55°C to + 55°C)
Type
Voltage/Wattage
Lamp Ref.
Max. Amb.
Ingress
Protection:
NEMA 4X & 6
IP66 & IP67
FL4
DC units
AC units
DD/E 13/XX
PLC 13 P4
55°C
55°C
Lamps:
Units are supplied without lamps
Terminals:
8 off suitable for up to 8 AWG conductor size
Entries:
Up to 3 × 1/ 2" NPT or 2 × 3/ 4" NPT
FB4
60W
100W
DD 13
PLC 13
55°C
55°C
Ordering Requirements
3S
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1258
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
NEMA 4X
IP66 & IP67
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
Steady-On Beacons
3S
MEDC Series
FB11 UL
Certification
10 Watt Steady Incandescent Light—Hazardous Locations
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 2, Groups C, D
Class I, Zone 1, AExd IIB T4/T5
Certified Ambient
Temperature
–67°F to +131°F
–55°C to +55°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 2 × 1/2" NPT, M20
Weight
6.2lb/2.8kg
Options
Body & lens color, lens guard,
certification, voltage 24,
48V DC, 110–120V AC
Ordering Code
Cat. #
Standard Product Configuration
ATEX
32500004
FB11B02410RNBNNN
24V DC, 10W bulb, red lens,
mounting bracket, natural black finish
UL, cUL Listed, Class I,
Div. 2, Groups C, D
32500028
FB11UL02410GNBNNR
10W incandescent beacon, 24V DC, green lens,
no lens guard, 2 × 1/2 NPT entries, painted red enclosure
UL, cUL Listed, Class I,
Div. 2, Groups C, D
32500029
FB11UL11010GNBNNR
10W incandescent beacon, 110V AC, green lens,
no lens guard, 2 × 1/2 NPT, painted red enclosure
FB12 UL
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 2, Groups C, D
Class I, Zone 1, AExd IIB T4/T5
Certified Ambient
Temperature
–67°F to +131°F
–55°C to +55°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 2 × 1/ 2" NPT, M20
Weight
2.6lb/1.2kg
Options
Body & lens color, lens guard,
certification, voltage 120V AC
Ordering Code
Cat. #
3S
Certification
60W/100W Steady Incandescent Light—Hazardous Locations
Standard Product Configuration
UL, cUL Listed, Class I,
Div. 2, Groups C, D
326023
FB12UL12060CNBNNN
120V AC, 60W bulb, clear lens, mounting bracket, no labels,
natural black finish
UL, cUL Listed, Class I,
Div. 2, Groups C, D
32600035
FB12UL12060GNBNNR
60W incandescent beacon, 120V AC, green lens, no lens guard,
2 × 1/ 2 NPT entries in a painted red enclosure
UL, cUL Listed, Class I,
Div. 2, Groups C, D
32600036
FB12UL02460GNBNNR
60W incandescent beacon, 24V DC, green lens, no lens guard,
2 × 1/ 2 NPT entries, painted red enclosure
UL, cUL Listed, Class I,
Div. 2, Groups C, D
32600037
FB12UL120100GNBNNR
100W incandescent beacon, 24V DC, green lens, no lens guard,
2 × 1/ 2 NPT entries, painted red enclosure
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1259
3S
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
Steady-On Beacons
NEMA 4X
IP66 & IP67
MEDC Series
FB15
100W Steady Incandescent Light—Hazardous & Ordinary Locations
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 2,
Groups A, B, C, D
Class I, Zone 1,
AExd IIC T3/T4
3S
Certification
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 3 x 1/2"
NPT or 3 x 3/4" NPT
Weight
6–8lb/2.6–3.6kg
Options
Body & lens color, lens guard,
lamp wattage, unit fixing,
mounting method, voltages
12–48V DC, 110–254V AC
Cat. #
Standard Product Configuration
47600001
FB15UL120100GNANR
120V AC, 100W bulb, green lens, mounting bracket, no labels,
red finish
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600020
FB15UL120100ANPNN
100W incandescent beacon, 120V AC, amber lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600021
FB15UL120100RNPNN
100W incandescent beacon, 120V AC, red lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600022
FB15UL120100GNPNN
100W incandescent beacon, 120V AC, green lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600023
FB15UL120100CNPNN
100W incandescent beacon, 120V AC, clear lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600024
FB15UL120100BNPNN
100W incandescent beacon, 120V AC, blue lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600025
FB15UL024100ANPNN
100W incandescent beacon, 24V DC, amber lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600026
FB15UL024100RNPNN
100W incandescent beacon, 24V DC, red lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600027
FB15UL024100GNPNN
100W incandescent beacon, 24V DC, green lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600028
FB15UL024100CNPNN
100W incandescent beacon, 24V DC, clear lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
47600029
FB15UL024100BNPNN
100W incandescent beacon, 24V DC, blue lens, no lens guard,
pipe mounting, 1 x 3/4 NPT entry, natural black enclosure
UL, cUL Listed, Class I,
Div. 2, Groups A, B, C, D
1260
Ordering Code
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
Steady-On Beacons
NEMA 4X
IP66 & IP67
3S
MEDC Series
Specification—FB11 and FB12 Units
Models:
FB11 & FB12—Incandescent
Finish:
Certification:
UL Listed for USA and Canada
– Class I, Div. 2, Groups C, D
– Class I, Zone 1, AExd IIB T4/T5
UL listing No. E187894
ATEX approved:
CENELEC EN50014 and EN50018
FB11: Cert. No. 99 ATEX 2195X
FB12: Cert. No. 99 ATEX 2196
Ingress Protection: NEMA 4X & 6, IP66 & IP67
Voltage:
FB11: 24, 48V DC
110, 220, 240, 250V AC
FB12: 120V AC
Incandescent:
FB11: 10W incandescent fitted as standard
FB12: 60W or 100W incandescent fitted as
standard
Material:
Body: Glass reinforced polyester
Lens: Glass
Cover screws + backstrap: stainless steel 316
Natural black or painted to customer specification
Terminals:
FB11: 6 x 14 AWG
FB12: 6 x 10 AWG
Labels:
Duty/Tag Label optional
Entries:
2 x 1/2" NPT
Certified
Temperature:
FB11: –67°F to +131°F (–55°C to +55°C) T4
–67°F to +104°F (–55°C to +40°C) T5.
FB12: –67°F to +131°F (–55°C to +55°C) T4
–67°F to +104°F (–55°C to +40°C) T5.
Weight:
FB11: 6.2lb / 2.8kg.
FB12: 16.7lb / 7.6kg.
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
3S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1261
3S
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
Steady-On Beacons
NEMA 4X
IP66 & IP67
MEDC Series
Specification—FB15 Unit
Certification: UL Listed for USA and Canada:
– Hazardous locations
Class I, Div. 2, Groups A, B, C, D
Class I, Zone 1, AExd IIC T3/T4
UL listing No. E187894
– Ordinary locations: Visual Signal Device
UL listing No. S8128
CENELEC/ATEX approved
CENELEC EN50014 & EN50018
ATEX Cert. No.
Baseefa 04ATEX0009X
Electrical Ratings:
Material:
Body: Glass reinforced polyester
Lens: Glass
Backstrap: Stainless steel 316
Wire Guard (optional): Stainless steel wire
Cast Guard (optional): Aluminium LM25M
Finish:
Natural black or epoxy painted to customer
specification
Voltage:
24, 48V DC
110, 120, 230, 240, 254V AC
Lamp Type:
60W or 100W GLS incandescent
Lamp Holder: E27 as standard
Voltage
DC
24 48
Current (A) — 60W lamp
2.5 .67 0.55 0.50 0.26 0.25
0.24
Current (A) —100W lamp
4.2 .73 0.91 0.83 0.43 0.42
0.39
110 120
AC
230
240
254
Certified
60W: –67°F to +131°F (–55°C to +55°C) T4
–67°F to +158°F (–55°C to +70°C) T3
Temperature:
100W: –67°F to +104°F (–55°C to +40°C) T4
Weight:
Pipe mount: 5.75lb/2.6kg;
Direct mount: 6.5lb/3.0kg
Ingress
Protection:
NEMA 4X & 6, IP66 & IP67
Entries:
Supplied as 2 x M20, up to 3 x M20 or 3 x M25
Supplied as 2 x 1/2" NPT (direct mount) or 3/4"
(pipe mount) as standard
Other options available:
Up to 3 x 1/2" NPT or 3 x 3/4" NPT (direct mount);
1
/2" NPT (pipe mount)—contact sales office to order
Terminals:
Direct mount: 12 x 14AWG
Pipe mount: 8 x 14AWG
Labels:
Tag/duty label option
Ordering Requirements
3S
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box. Standard products available for immediate shipping - contact sales office for details.
1262
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
NEMA 4X
IP66 & IP67
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
Steady-On Beacons
3S
MEDC Series
SM87 LU3
10 Watt Steady Incandescent Light—Explosionproof
Certification
UL Listed for:
cULus, CSA, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1, AExd IIB
Certified Ambient Temperature –67°F to +131°F
–55°C to +55°C
Certification
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Alloy
Entries
2 x 1/2" or 3/4" NPT, 20mm, 25mm
Weight
4.4lb/2.0kg
Options
Body & lens color, lens guard,
certification, voltages 12–48V DC,
110V–254V AC
Ordering Code
Cat. #
Standard Product Configuration
UL, cUL Listed, Class I, Div. 2,
Groups C, D
762311
SM87LU3AUL024RN3R3LNR
24V DC, red lens, 2 x 1/2" NPT entries, no labels, red finish
ATEX
46200122
SM87LU3AB024GN1T1BNR
Exd, IIC, T4/T6 incandescent beacon, 24V DC, green lens,
no lens guard, 2 x M20 cable entries, painted red enclosure
UL, cUL Listed, Class I, Div. 1,
Groups C, D
46200096
SM87LU3AUL024GN3T3BNR
24V DC, green lens, 10W incandescent bulb, marine grade
alloy, red finish
SM87 LU1
10 Watt Steady Fluorescent Light—Explosionproof
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1, AExd IIB
Certified Ambient Temperature –67°F to +131°F
–55°C to +55°C
Certification
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Alloy
Entries
2 x 1/2" or 3/4" NPT, 20mm, 25mm
Weight
4.4lb/2.0kg
Options
Body & lens color, lens guard,
certification, voltages 12–48V DC,
120V–254V AC
Ordering Code
Standard Product Configuration
46200054
SM87LU1AUL024RN4T4BNR
24V DC, red lens, 2 x 3/4" NPT entries,
no labels, red finish
UL, cUL Listed, Class I, Div. 1,
Groups C, D
46200052
SM87LU1AUL024GN4T4BNR
24V DC, green lens, 10W fluorescent bulb,
marine grade alloy, red finish
ATEX
46200121
SM87LU1AB024GN1T1BNR
Exd, IIC, T4/T6 fluorescent beacon, 24V DC, green lens,
no lens guard, 2 x M20 cable entries, painted red enclosure
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
3S
Cat. #
UL, cUL Listed, Class I, Div. 2,
Groups C, D
1263
3S
Steady-On Beacons
Cl. I, Div. 1 (FB4 & FL4)
Cl. I, Div. 2 (FB11, FB12 & FB15)
Cl. I, Zone 1
NEMA 4X
IP66 & IP67
MEDC Series
Specification—SM87LU1/SM87LU3 Units
Models:
SM87 LU1: Fluorescent
SM87 LU3: Incandescent
Certification:
Ingress
Protection:
UL Listed for USA and Canada: Class I, Div. 1, Groups
C, D and Class I, Zone 1. Listing No: E187894.
CSA Certified for Class I, Div. 1 & 2, Group D
Certificate No. 96406
ATEX approved:
Exd IIC T3-T6 (model dependent)
Certificate No. 03ATEX0222X
NEMA 4X and 6
IP66 & IP67
Material:
Marine Grade Aluminium Alloy LM25TF with glass lens
Finish:
Epoxy paint finish as standard or to customer's
specification
Fluorescent:
10 Watt tube light output 600 Lumens (240V & 254V
AC versions)
5 Watt tube max. light output 250 Lumens (DC
versions)
Incandescent: Single incandescent fitted as standard 10 watts.
Others may be available, please contact MEDC with
your requirements
Weight:
4.4lb/2.0kg approx.
Certified
Temperature:
SM87LU1/3 –67°F to +131°F
–55°C to +55°C
Voltage:
12, 24, 48V DC, 110V (LU3 only), 220V, 240V, 254V AC
50Hz as standard. 60Hz available if required
Terminals:
SM87: 4 off for up to 14 AWG cable
Entries:
SM87LU1& 3: 2 x 1/2" or 3/4" NPT, 20mm, 25mm
Power
LU1–
7 Watts for 12V DC, 24V DC, 48V DC, 220V AC
Consumption:
14 Watts for 240V AC, 15 Watts for 254V AC
LU3–
Single incandescent fitted as standard 10W. Other
options are available—please contact MEDC with
your requirements
Ordering Requirements
3S
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1264
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
HAZARD•GARD®
Division 1, Zone 1
3S
Steady-On Beacons
Eaton's Crouse-Hinds Hazard•Gard EXSO and EXDSO (Diode
Polarized) Series Explosionproof Steady-On Beacons are
designed for installation in hazardous locations where a visual signal
is required for tough environmental conditions involving corrosives,
water, dust and extreme temperature.
The units are UL Listed for Type 3R, 4X and marine installations. The
steady-on beacons are available for pendant, wall, stanchion and
ceiling mounts, and come in six different globe colors.
Typical industrial and commercial applications include food
processing plants, refineries, mines, tankers, laboratories, sewage
treatment plants, offshore oil rigs, water and filtration plants and
chemical plants.
The diode polarized steady-on beacon is used in electrically
supervised circuitry for life safety or security applications.
Applications:
•
•
•
•
•
Safety lighting
Exit or entrance lights
Obstacle warning
Continuous source to communicate
For identifying the location of safety equipment such as showers
or emergency telephones
Typical Industries:
•
•
•
•
•
•
Chemical plants
Storage handling
Dust conveyor systems
Energy exploration
Textile mills
Flour and feed mills
Certifications and Compliances:
•
•
•
•
•
•
•
•
Class I, Division 1, Groups C, D
Class I, Zones 1 & 2, Group IIB
Class II, Division 1, Groups E, F, G
Class III
UL and cUL 1638, UL 1203 and UL 844 Listed
1598A Marine Listed (120V AC and 24V DC only)
cUL Listed C22.2 No. 205
NEMA 4X watertight, IP66
Materials and Finishes:
Features and Benefits:
• Powerful halogen light source for clear visual indication
• Available in six different globe colors—amber, blue, clear, green,
magenta and red
• Factory sealed—no external seals required
• Quick connect—steady-on beacon fixture threads onto mounting
module for easy installation
• Small compact size—ceiling mount is 133/4-inch long
• Available in pendant, wall, stanchion and ceiling mount
•
•
•
•
•
Body, mounting modules and guard—Copper-free aluminum
Globe—Heat and impact-resistant glass
Gaskets—Silicone
External hardware—Stainless steel
Internal components—Solid-state electronics in a moistureresistant and heat-dissipating epoxy
• Epoxy powder coated for corrosion resistance
Ratings:
• 120V AC (EXR) and 24–28V DC (EXDR)
• Operating Current: 0.35 amps at 120V AC (EXSO);
0.8 amps at 24–28V DC (EXDSO, diode polarized)
• Peak Candlepower: 3328
3S
Hub Size:
• 3/4-inch NPT pendant, ceiling and wall mount
• 11/4-inch NPT stanchion mount
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1265
HAZARD•GARD®
3S
Division 1, Zone 1
Steady-On Beacons
Ordering Information:
Step 2 - Order Mounting Module
Step 1 - Order Rotating Beacon Type
Cat. #
Voltage
Lens Color
NEMA Rating
Cat. #
3R, 4X, Marine
EVMP2
/4"
EV22 & EV87 3/4"
Explosionproof Steady-On Beacons
EXSO301A/120
120V AC
Hub Size Mounting Style
3
Amber
Pendant
Wall
EXSO301B/120
120V AC
Blue
3R, 4X, Marine
EV22
3
/4"
Ceiling
EXSO301C/120
120V AC
Clear
3R, 4X, Marine
EVMJ4
11/4"
Stanchion
EXSO301G/120
120V AC
Green
3R, 4X, Marine
EXSO301M/120
EXSO301R/120
120V AC
120V AC
Magenta
Red
3R, 4X, Marine
3R, 4X, Marine
Diode Polarized Explosionproof Steady-On Beacons
EXDSO301A/24 28
24–28V DC
Amber
3R, 4X, Marine
EXDSO301B/24 28
24–28V DC
Blue
3R, 4X, Marine
EXDSO301C/24 28
24–28V DC
Clear
3R, 4X, Marine
EXDSO301G/24 28
24–28V DC
Green
3R, 4X, Marine
EXDSO301M/24 28
24–28V DC
Magenta
3R, 4X, Marine
EXDSO301R/24 28
24–28V DC
Red
3R, 4X, Marine
Temperature Performance Data:
Class I,
Div. 1, 2,
Class II,
Ambient
Groups C, D,
Class III,
Max.
Supply Class I, Zone 1, Div. 1,
Temp.
Wire
Group IIB
Groups E, F, G
Class II,
Class III,
Div. 2,
Groups F, G
40°C
55°C
65°C
75°C
90°C
105°C
T6 (85°C)
T5 (100°C)
T5 (100°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
EXDSO Series Steady-On Beacon—Diode Polarized Voltage 24–28V DC 40°C
55°C
65°C
75°C
90°C
105°C
T6 (85°C)
T6 (85°C)
T6 (85°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
T4A (120°C)
T4 (135°C)
T4 (135°C)
Description
3S
EXSO Series Steady-On Beacon Voltage 120V AC
1266
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Division 1, Zone 1
HAZARD•GARD®
3S
Steady-On Beacons
Dimensions
In Inches:
Ceiling Mount
Stanchion Mount
Pendant Mount
3S
Wall Mount
Net Luminaire Weights:
Description
Luminaire Housing with Guard
11.0 lbs.
Weight
Add mounting modules:
Pendant
Ceiling
Wall
Stanchion
1.0
1.0
4.5
2.5
lbs.
lbs.
lbs.
lbs.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1267
3S
Cl. I, Div. 2, Groups A, B, C, D
Cl. I, Zone 2, Group IIC
Wet Locations
3, 3R
VF "Steady On" Beacon
Compact Fluorescent
Warning and Visual
Indication Light
Green – Safety Shower
Blue – Emergency Telephones
Red – Danger
Amber – Warning
Visual Signal
Applications:
3S
VF series "Steady On" fluorescent beacons are used indoors or
outdoors:
• Where the energy efficiency and long life of compact fluorescent
lamps are desired
• For continuous signaling requirements
• Where a continuous "Steady-On" fluorescent light signal is
required
• Where ambient noise makes audible signals difficult to hear
• As visual signals or warning lights on loading docks; at
obstructions, exits or entrances
• For identifying the location of safety equipment such as safety
showers or emergency telephones
• For call signals
• For status indication or area lighting on offshore rigs, mines,
refineries etc.
• In locations which are hazardous due to the presence of
flammable vapors or gases and where dampness or corrosion are
present
• To identify a potentially dangerous obstacle
• As a continuous source to warn or communicate
Typical Applications are:
• Green - Identify safety shower locations
• Blue - Identify emergency telephones
• Amber - Caution signal
• Red - Danger signal
• Red & Amber - Emergency situations
• Blue & Red - Security or malfunctioning equipment
• Green & Clear - Equipment end of cycle
Certifications and Compliances:
• NEC and CEC:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2
• UL Standards:
844
1598 Luminaires
• CSA Standards:
C22.2 No. 137
Features:
Standard Materials:
• Extremely energy-efficient, only 18 watt (2-9 watt compact
fluorescent lamps)
• Packs considerable punch for ample visibility even in harsh
enviroments
• Compact size and light weight allow adaptation and easy
installation in many industrial applications
• Cast copper-free aluminum (less than 0.4 of 1% copper)
construction and epoxy powder finish provide excellent resistance
to corrosion
• Variety of mounting arrangements to suit any lighting layout –
pendant, ceiling, wall bracket, angle stanchion
• Glass globes are internally fluted and stippled to enhance visibility;
exteriors are smooth to shed dust
• Grounding wire for safety
• Bodies and guards – copper-free aluminum (less than 0.4 of 1%)
• Globes – glass
Standard Finishes:
• Copper-free aluminum – powder epoxy finish
Electrical Ratings:
• Input voltage – 120 VAC, 60 hertz
• Wattages: 18W (Two 9W lamps)
Weights:
Ordering Information:
Style
Cat. # - by Globe Color
Red
Amber
Green
Blue
Clear
Pendant
Wall
Ceiling
Stanchion
VFA222GRP
VFHBF222GRP
VFHF222GRP
VFHA422GRP
VFA222GGP
VFHBF222GGP
VFHF222GGP
VFHA422GGP
VFA222GBP
VFHBF222GBP
VFHF222GBP
VFHA422GBP
VFA222GP
VFHBF222GP
VFHF222GP
VFHA422GP
VFA222GAP
VFHBF222GAP
VFHF222GAP
VFHA422GAP
Luminaire
Type
VFA
VFHF
VFHBF
Temperature Performance Data:
Style
1&2
Lamp
9W
1268
Class I,
Div. 2
Max.
Ambient
Supply
Wire °C
Minimum
Operating
T3B
40°C
75°C
–4°C (25°F)
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
2-Lamp
Luminaire
With Globe &
Guard (lbs.)
5
51/4
71/2
VF "Steady On" Beacon
Compact Fluorescent
Warning and Visual
Indication Light
Cl. I, Div. 2, Groups A, B, C, D
Cl. I, Zone 2, Group IIC
Wet Locations
3, 3R
Green – Safety Shower
Blue – Emergency Telephones
Red – Danger
Amber – Warning
Visual Signal
3S
Dimensions
In Inches:
Pendant
Wall
Stanchion
VFA
VFHBF
VFHA
Ceiling
VFHF
3S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1269
3S
3S
1270
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
4S
Status Lights
Hazardous
Description
Page No.
Status Lights - MEDC Series
FB12 SL
SM87 SL
XB11 SLUL
XB12 SL
see
see
see
see
pages
pages
pages
pages
1272–1275
1272–1275
1272–1275
1272–1275
4S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1271
4S
Status Lights
Explosionproof
Weatherproof
MEDC Series
XB12 SL
SM87 SL
NOTE: Units shown are for representation only. Other variations are available.
Features and Benefits:
The most rugged and reliable status lights for harsh and hazardous
applications.
• 4–wire monitored connection for supervisory circuits*
• Marine grade alloy or GRP
• Pre-wired to customer’s requirements
Available as Xenon, incandescent and fluorescent beacons/strobes.
The SM87 SL range is manufactured in marine grade alloy and the
XB12 SL in corrosion-free GRP to provide a wide range of status
lights to suit your requirements.
All units can be supplied as 1, 2, 3, 4 or 5 stacks.
4S
Applications:
• Process status
• Messaging
• Alert or emergency condition indication
Typical Industries:
•
•
•
•
•
Certifications and Compliances:
• UL Listed for USA and Canada*
Class I, Div. 1 & 2, Groups C, D
Class I, Zone 1, AExd IIB T6
• CSA certified*
• ATEX approved
• Xenon, fluorescent, incandescent*
• NEMA 4X & 6, IP66 & 67
• Certified temperature –67°F to +131°F*
–55°C to +55°C
Offshore & onshore
Energy exploration & transmission
Refining
Chemical & petrochemical
Pharmaceutical
*Depending on model.
1272
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Explosionproof
Weatherproof
Status Lights
4S
MEDC Series
SM87 SL
Certification
Xenon, Incandescent & Fluorescent Status Lights—Explosionproof
Certification
UL Listed for:
cULus, CSA, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1, AExd IIB T4
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Alloy
Entries
Up to 1 x 1/2" NPT
Max. No. of Ways
4
Options
Body & lens color, certification,
voltages 24–48V DC, 110–254V AC
Voltage
Standard Product Configuration
26200043
SM87SL3
Explosion protected, three stack, one 1/2" NPT entry on bottom, no lens
guards, xenon strobe with red, green, and clear lens
24V DC
26200055
SM87SL2
Xenon status lamp, two stack 5 joule beacons interconnected on a painted
red stainless steel baseplate, one red and one green lens color, 1/2" NPT
entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
Div. 1, Groups C, D
24V DC
26200056
Incandescent status lamp, two stack 40 watt beacons interconnected on
SM87SL2 a painted red stainless steel baseplate, one red and one green lens color, 1/2"
NPT entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
Div. 1, Groups C, D
24V DC
26200057
SM87SL2
Fluorescent status lamp, two stack 5 watt beacons interconnected on a
painted red stainless steel baseplate, one red and one green lens color,
1
/2" NPT entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
110V AC
Div. 1, Groups C, D
26200058
SM87SL2
Xenon status lamp, two stack 5 joule beacons interconnected on a painted
red stainless steel baseplate, one red and one green lens color, 1/2" NPT
entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
Div. 1, Groups C, D
24V DC
26200059
SM87SL3
Xenon status lamp, three stack 5 joule beacons interconnected on a
painted red stainless steel baseplate, one red, one amber and one green
lens color, 1/2" NPT entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
Div. 1, Groups C, D
24VDC
26200060
Incandescent status lamp, three stack 40 watt beacons interconnected on
SM87SL3 a painted red stainless steel baseplate, one red, one amber and one green
lens color, 1/2" NPT entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
Div. 1, Groups C, D
24V DC
26200061
SM87SL3
Fluorescent status lamp, three stack 5 watt beacons interconnected on a
painted red stainless steel baseplate, one red, one amber and one green
lens color, 1/2" NPT entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
110V AC
Div. 1, Groups C, D
26200062
SM87SL3
Xenon status lamp, three stack 5 joule beacons interconnected on a
painted red stainless steel baseplate, one red, one amber and one green
lens color, 1/2" NPT entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
110V AC
Div. 1, Groups C, D
26200066
Incandescent status lamp, three stack 40 watt beacons interconnected on
SM87SL3 a painted red stainless steel baseplate, one red, one amber and one green
lens color, 1/2" NPT entry in the bottom unit for customer connection
UL, cUL Listed, Class I,
220V AC
Div. 1, Groups C, D
26200063
SM87SL3
24V DC
UL, cUL Listed, Class I,
Div. 1, Groups C, D
Ordering Code
www.crouse-hinds.com
Fluorescent status lamp, three stack 5 watt beacons interconnected on a
painted red stainless steel baseplate, one red, one amber and one green
lens color, 1/2" NPT entry in the bottom unit for customer connection
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1273
4S
Cat. #
UL, cUL Listed, Class I,
Div. 1, Groups C, D
4S
Explosionproof
Weatherproof
Status Lights
MEDC Series
XB11 SLUL
Xenon Strobe & Incandescent Status Lights—Hazardous Locations
Certification
UL Listed for:
UL, ATEX
Class I, Div. 2, Groups C, D
Class I, Zones 1 & 2, AExd IIB T4
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
1 x 1/2" NPT
Max. No. of Ways
5
Options
Body & lens color, tag & duty labels
Certification
Ordering Code
UL Listed, Class I, Div. 2, Groups C, D
XB12 SL/FB12 SL
Standard Product Configuration
Explosion protected, 3 stack, one 1/2" NPT entry on bottom, 24V DC,
green incandescent on top, yellow xenon flashing in middle, red
XB11ULSL3
xenon flashing on bottom, no lens guards, red finish
Xenon Strobe & Incandescent Status Lights—Hazardous Locations
Certification
UL Listed for:
UL, ATEX
Class I, Div. 2, Groups C, D
Class I, Zones 1 & 2, AExd IIB T4
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress
Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
1 x 1/2" NPT
Max. No. of Ways
5
Options
Body & lens color, certification,
voltages 24V DC, 110–254V AC
Certification
4S
42500005
Cat. #
Ordering Code
Cat. #
Standard Product Configuration
UL Listed, Class I, Div. 2, Groups C, D
42600001
XB12ULSL3
110V AC, explosion protected, three stack, one 1/2" NPT entries,
red xenon flashing on top, amber xenon flashing in middle, clear
xenon flashing on bottom; no lens guards, red finish
UL Listed, Class I, Div. 2, Groups C, D
42600007
XB12ULSL2
24V DC xenon status lamp, two stack 21 joule beacons
interconnected on a painted red stainless steel baseplate, one red
and one green lens color, 1/2" NPT entry in the bottom unit for
customer connection
UL Listed, Class I, Div. 2, Groups C, D
42600008
FB12ULSL2
24V DC incandescent status lamp, two stack 60W beacons
interconnected on a painted red stainless steel baseplate, one red
and one green lens color, 1/2" NPT entry in the bottom unit for
customer connection
UL Listed, Class I, Div. 2, Groups C, D
42600009
XB12ULSL3
24V DC xenon status lamp, three stack 21 joule beacons
interconnected on a painted red stainless steel baseplate, one
red, one amber and one green lens color, 1/2" NPT entry in the
bottom unit for customer connection
FB12ULSL3
24V DC incandescent status lamp, three stack 60W beacons
interconnected on a painted red stainless steel baseplate, one
red, one amber and one green lens color, 1/2" NPT entry in the
bottom unit for customer connection
UL Listed, Class I, Div. 2, Groups C, D
1274
www.crouse-hinds.com
42600010
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Status Lights
4S
Explosionproof
Weatherproof
MEDC Series
SM87 SL
Typical four unit assembly. Various options are available.
XB12 SL
Typical two unit assembly. Various options are available.
SM87 SL typical three unit assembly
XB11 SL
Specification—SM87SL Unit and XB12SL Unit
Lamp Types
SM87 SL
Xenon 5 joules maximum
Fluorescent 10W or 5W
Incandescent 40W maximum
Voltage Frequency
XB12 SL
Xenon 21 joules
Incandescent 60W
50 Hz as standard. 60 Hz available if required.
Xenon Voltages
24, 48V DC 110, 120, 240, 254V AC
(see SM87 HXB data sheet for further information)
24V DC, 110V, 240V AC
(see XB12 data sheet for further information)
Incandescent Voltages
12, 24, 48V DC, 110, 220, 240, 254V AC
(see SM87 LU3 data sheet for further information)
120V AC
(see FB12 data sheet for further information)
Fluorescent Voltages
12, 24, 48V, 220, 240, 254V AC
(see SM87 LU1 data sheet for further information)
–
Lamp Colors
Red, Amber, Yellow, Green, Blue or Clear
UL Listed for USA and Canada Class I, Div. 2,
Groups C, D, Class I, Zones 1 & 2, AExd IIB T4/T5
Listing No. E187894
ATEX Approved:
Exd IIB T4/T5
Cert. No. 99 ATEX 2196
CENELEC EN50014 and EN50018
Terminals
Will accept up to 14AWG cable
Will accept up to 6 off 10AWG cable
Wiring
Standard configuration of internal wiring is to common the negative/neutral connections
If individually wired lamps are required, please state requirements
Entries
Up to 3 x 1/2" or 3/4" NPT
Enclosure
LM 25TF Marine Grade Alloy
1 x 1/2" NPT
GRP
Lens
Finish
Glass
Epoxy paint as standard or to customer’s specification
Ingress Protection
Ambient Temp.
Natural black or epoxy paint to customer’s specification
NEMA 4X and 6, IP66 & 67
–13°F to 131°F (–25°C to +55°C) – Class I, Div 1
–67°F to +131°F (–55°C to +55°C) – Class I, Zone 1
–67°F to +158°F (–55°C to +70°C)
NOTE: XB11 SLUL also available.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1275
4S
Certification
UL Listed for USA and Canada Class I, Div. 1, Groups
C, D, Class I, Zone 1, AExd IIB T6. Listing No. E187894.
CSA Certified: Class I, Div. 1 & 2, Group D.
Cert. No. 96406.
ATEX Approved:
Exd IIC T4 (incandesent), Exd IIC T6
(Fluorescent & Xenon)
Cert. No. Baseefa 03ATEX0222X
CENELEC EN50014, EN50018
4S
4S
1276
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Audible Signaling Devices
5S
Hazardous
Description
Page No.
Speakers and Tone Generators - MEDC Series
DB1
DB3
DB4
DB5
DB12
DB15
DB16 UL
see
see
see
see
see
see
see
pages
pages
pages
pages
pages
pages
pages
1278–1280
1278–1281
1282–1285
1282–1286
1283–1287
1283–1288
1284–1289
Speakers and Tone Generators - Flex•Tone Series
ETH640, ETH840
ETH645, ETH845
ETH655, ETH855
see page 1292
see page 1291
see page 1290
Signaling Horns and Bells
ESR
ETH
W2H
WH
see pages 1296–1297
see page 1293
see page 1294
see page 1295
5S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1277
5S
Hazardous Locations
Weatherproof
Speakers & Tone Generators
Up to 30 Watts
Loudspeakers and tone generators provide high decibel
communication for messaging, alert and evacuation in harsh and
hazardous locations.
• Metallic and non-metallic housings
• Explosionproof and Class I, Division 2 horns and speakers
• Mounting brackets that allow a full 180° swivel
• Products designed for both conduit wiring and/or cable
connection (NPT or metric entries available)
• Selectable tones
This range of loudspeakers, intended for use in potentially explosive
gas and dust atmospheres, has a power rating of up to 30 Watts and
is suitable for use in the harsh environmental conditions found
offshore and onshore in the oil, gas and petrochemical industries.
The flamepaths, flare and body, are manufactured from a UV stable
glass reinforced polyester. Stainless steel screws and mounting
stirrup are incorporated to ensure a corrosion-free product.
Applications:
• Plant-wide alarm notificiaton
DB16
• Audible process alarms
Typical Industries:
Certifications and Compliances:
• Refineries
• UL Listed for USA and Canada
Hazardous locations:
• Chemical plants
Class I, Div. 2, Groups A, B, C, D*
• Oil and gas exploration
Class I, Zone 1, AExde IIB/IIC T3/T4*
• Marine terminals for transportation & storage
Ordinary locations: Signalling Speaker
• ATEX approved
• NEMA 4X & 6, IP66 and IP67
• Certified temperature:
-67°F to +104°F
-50°C to +40°C
Features and Benefits:
• GRP corrosion-free flamepath
5S
• Up to 112dBA at 30 Watts at 10 feet*
• Power tappings via integral transformer
• Ratcheted swivel mounting stirrup
• Stainless steel fixtures
• 100V line or 8 ohm versions available
*Model dependent.
1278
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Speakers & Tone Generators
Hazardous Locations
Weatherproof
5S
Up to 30 Watts
DB1
103dB(A) @ 10ft Horn—Explosionproof
Certification
UL Listed for:
UL, ATEX
Class I, Div. 1, Groups C, D
Class I, Zone 1
Certified Ambient
Temperature
–13°F to +158°F
–25°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Alloy
Entries
Up to 3 x 1/2 " or 3/4" NPT, 20mm, 25mm
Weight
7.7lb/3.5kg (model dependent)
No. of Tones
Multiple tones available
Options:
Body color, certification, voltages
12–48V DC, 110V ACC
Output
Ordering
Code
ATEX approved Ex II 2GD
103dB(A)
UL Listed, Class I, Div. 2, Groups C, D
Up to 96dB(A) @ 10ft
Certification
Cat. #
Standard Product
Configuration
801001
DB1BA024A1A3NNNR
Choice of 6 tones, red finish
869111
DB1PULA024D1D2NNNR
Two-stage alarms, with 26 tones,
24V DC, alloy, red body color, no
tag or duty labels, 2 x 3/4" NPT
UL Listed, Class I, Div. 2, Groups C, D Up to 103dB(A) @ 10ft
869115 DB1HPULA024D1D2NNNR
entries
Sounder, 110V AC, 2 x 1/2" NPT
UL Listed, Class I, Div. 2, Groups C, D Up to 96dB(A) @ 10ft 17300108 DB1PULA110C1C3NNNR
entries, red painted enclosure
DB3
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
UL, cUL Listed, Class I, Div. 2,
Groups A, B, C, D
ATEX Ex II 2GD
ATEX Ex II 2GD
ATEX Ex II 2GD
ATEX Ex II 2GD
ATEX Ex II 2GD
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 2, Groups A, B, C, D
Class I, Zones 1 & 2, AExd IIC T4
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 2 x 1/2" NPT, 20mm
Weight
13.2lb/6.0kg
No. of Tones
27 + 5 Programmable
Options:
Body color, certification, voltages
12–48V DC, 110V–254V AC
Ordering
Code
Body Color
Voltage
Type*
Red
12–48V DC
Single Stage
869131
DB3UL048N2CNRZ
Red
12–48V DC
Two Stage
869132
DB3PUL048N2CNRZ
Red
110V AC
Single Stage
869135
DB3UL110N2CNRZ
Natural Black
Natural Black
Red
Red
Red
12–48V DC
240V AC
12–48V DC
240V AC
12–48V DC
Two Stage
Single Stage
Two Stage
Single Stage
Single Stage
803121
803122
803123
803124
803125
DB3PD048N2BNNZ
DB3D240N2BNNZ
DB3PD048N2CNRZ
DB3D240N2BNRZ
DB3D048N2CNRZ
*Single Stage
4 wired diode monitored connection—on board diode allows unit to be operated in
supervisory mode when monitoring line in reverse polarity.
www.crouse-hinds.com
US: 1-866-764-5454
Cat. #
Standard Product
Configuration
27 tones, no tag or duty
labels, 108 dB(A) output,
NEMA 4X & 6, 2 x 1/2"
NPT entries with
certified plug
27 tones, no tag or duty
labels, 2 x M20 entries
with one certified plug
fitted
*Two Stage
Switchable unit available in DC versions only either by:
(i) Reversing the polarity of the supply, or,
(ii) By a 3 wire common +ve system, switching between the –ve lines.
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1279
5S
Certification
108dB(A) @ 10ft Horn—Hazardous Locations
5S
Hazardous Locations
Weatherproof
Speakers & Tone Generators
Up to 30 Watts
Specification—DB1 Unit
Certification:
UL Listed for Class I, Div. 1, Groups C, D and Class
I, Zone 1
UL Listing No. E187688
ATEX Approved:
Exd, IIB T3
Cert. No. Baseefa 02ATEX0207 for DB1(P)
Cert. No. Baseefa 02ATEX0209 for DB1H(P)
Material:
LM25 corrosion resistant alloy with stainless steel
cover screws
ABS flare
Epoxy paint finish as standard or to customer's
specification
Finish:
Max. Sound Levels:
DB1P=93±3dB(A) (86±3dB(A) for 12V DB1)
DB1HP=100 ± 3dB(A) @ 10 feet
Note: Sound level is dependent upon the tone selection.
Weight:
DB1P 7.7lb/3.5kg approx.
DB1HP. 12.3lb/5.6kg approx.
Certified Temperature:
–13°F to +158°F
–25°C to +70°C
NEMA 4X, IP66
27 user selectable tones
Ingress Protection:
Tone Selection:
Tone Tone Frequency
Tone Tone Frequency
1
Alt Tones 800/970Hz at 1/4 sec.
15
554 Hz for 0.1S/440 Hz for 0.1S
2
Sweeping 800/970Hz at 7 Hz
16
Int 660 Hz 150 mS on 150 mS off
3
Sweeping 800/970Hz at 1 Hz
17
Int 660 Hz 1.8 sec. on 1.8 sec. off
4
Continuous at 2850 Hz
18
Int 660 Hz 6.5 sec. on 13 sec. off
5
Sweeping 2400–2850 Hz at 7 Hz 19
Continuous 660 Hz
6
Sweeping 2400–2850 Hz at 1 Hz 20
Alt 554/440 Hz at 1 Hz
7
Slow Whoop
21
Int 660 Hz at 7/8 Hz
8
Sweep 1200–500 Hz at 1 Hz
22
9
Alt Tones 2400/2850Hz at 2 Hz 23
10
Int Tones of 970 Hz at 1 Hz
24
Sweep 2400–2850 Hz at 50 Hz
11
Alt Tones 800/970Hz at 7/8 Hz
25
3x970 Hz pulses 0.5 off, 1.5 off
12
Int Tone at 2850 Hz at 1 Hz
26
3x2850z pulses 0.5 on/0.5 off, 1.5 off.
13
970 Hz at 1/4 sec. on 1 sec. off
27
Int 3100 Hz 0.3 sec. on 0.7 sec. off
14
Continuous at 970 Hz
Int 2850 Hz 150 mS on 100 mS off
Sweep 800–970 Hz at 50 Hz
Single Stage
4 wired diode monitored connection—on board diode allows unit to be operated
in supervisory mode when monitoring line in reverse polarity.
Two Stage
5S
Switchable unit available in DC versions only either by:
(i) Reversing the polarity of the supply, or,
(ii) By a 3 wire common +ve system, switching between the –ve lines.
Current Consumption:
Ordering Requirements
The following code is designed to help in the selection of the
correct unit. Build up the reference number by inserting the
code for each component into the appropriate box.
1280
www.crouse-hinds.com
US: 1-866-764-5454
Labels:
Entries:
Terminals:
CAN: 1-800-265-0502
Voltage
DB1P
DB1HP
12V
24V
48V
110V
125mA
250mA
250mA
60mA
900mA
700mA
–
200mA
Duty and tag labels optional
Up to 3 x 1/2" or 3/4" NPT
Suitable to accept up to 12 AWG conductor size
Copyright© 2013 Eaton’s Crouse-Hinds Business
Hazardous Locations
Weatherproof
Speakers & Tone Generators
5S
Up to 30 Watts
Specification—DB3 Unit
Certification:
UL Listed for USA and Canada
– Hazardous locations:
Class I, Div. 2, Groups A, B, C, D
Class I, Zones 1 & 2, AExd IIC T4
UL Listing No. E203310
– Ordinary locations: Audible Signal Device
UL Listing No. S8116
ATEX approved:
CENELEC EN50014, 18, 19
Cert. No. BAS00ATEX2097X, Exd IIC
Cert. No. BAS00ATEX2098X, Exde IIC
Zones 1 & 2
Material:
Body & horn in anti-static, UV stable, glass
reinforced polyester
Swivel bracket and captive cover screws in
stainless steel
Finish:
Body and horn, natural black or epoxy paint
coated to client’s color requirements
Sound Output:
DB3 105 ±3dB(A) Typical at 10 feet (tone
dependent)
Volume Control:
Integral volume control
*Nominal
Output
(dBa)
Input Current
(mA)
83
95
98
101
102
104
105
50
100
150
200
250
300
350
Terminals:
4 x 14 AWG (AC), 6 x 14 AWG (DC)
Mounting:
Stainless steel bracket with rachet facility
Labels:
Duty and tag labels optional
Cable Entries:
UP TO 2 × /2" NPT
Weight:
13.2lb/6.0kg approx.
Tone Selection:
27 user selectable tones available
Horn/Strobe Unit:
The DB3 may be combined with an MEDC
strobe to create a combined audio/visual
alarm.
Contact MEDC for price and specification.
Certified
Temperature:
–67°F to +158°F
–55°C to +70°C
Ingress
Protection:
NEMA 4X & 6, IP66 & 67
Voltage:
Up to 48V DC Up to 254V AC
Current
Consumption:
V
I
12V DC
24V DC
48V DC
110V AC
120V AC
220V AC
230V AC
240V AC
254V AC
760mA
380mA
190mA
135mA
124mA
68mA
65mA
62mA
62mA
*Output measured with 24V input voltage. Tone set to 970Hz
continuous.
1
Two Stage Unit: DB3P Switchable between any two tones by either:
3 & 4 Tone Unit:
Remote 3 & 4 tone unit available—contact
sales office for details.
5S
(i) Reversing the polarity of the supply, or
(ii) by a 3 wire common +ve system, switching
between the two –ve lines.
Note: Two stage unit available in DC versions
only.
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each component into
the appropriate box.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1281
5S
Hazardous Locations
Weatherproof
Speakers & Tone Generators
Up to 30 Watts
DB4
8-25 Watt Speaker—Hazardous Locations
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 2, Groups A, B, C, D
Class I, Zone 1, AExd IIC T4
Certified Ambient
Temperature
–67°F to +158°F
–55°C to +70°C
Ingress Protection NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Output
97 dB(A) at 1W at 10 feet
109 dB(A) at 25W at 10 feet
Entries
Up to 2 x 1/2" NPT, 20mm
Weight
11lb/5.0kg
Options
Body color, transformer, certification, power 25W,
15W, 8W
Certification
Power
Ordering Code
Cat. #
Standard Product Configuration
UL, cUL Listed Class I, Div. 2,
Groups A, B, C, D
25W
869142
DB425ULX(100)N2CNR
100V line transformer, no labels,
2 x 1/2" NPT entries, red finish
UL, cUL Listed Class I, Div. 2,
Groups A, B, C, D
25W
869144
DB425ULX(70)N2CNR
70V line transformer, no labels,
2 x 1/2" NPT entries, red finish
ATEX Approved ExII 1G
15W
804215
DB415DXN2BNZ
ATEX Approved ExII 1G
25W
804225
DB425DXN2BNZ
DB5
5S
Up to 93dB(A) @ 10ft Horn—Intrinsically Safe
Certification
Certification
FM Approved for:
FM, ATEX
Class I, Div. 1 & 2, Groups A, B, C, D
Certified Ambient
Temperature
–4°F to +131°F
–20°C to +55°C
Ingress Protection
NEMA 4
IP65
Material
Corrosion-free ABS
Entries
Up to 2 x 13/16" via knockouts
Weight
0.7lb/0.3kg
No. of Tones
26
Options
Body color, certification, voltages 12V–240V DC
Voltage
Ordering Code
Cat. #
ATEX Approved ExII 1G
ATEX Approved ExII 1G
12V DC
24V DC
805001
805002
DB5B012NR
DB5B024NR
FM Approved for Class I,
Div. 1 & 2, Groups A, B, C, D
24V DC
869150
DB5FM024NR
1282
100V line transformer, no labels,
2 x M20, one certified plug,
flameproof enclosure, natural black finish
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Standard Product Configuration
Intrinsically safe, up to 3 × M20 entries via knockouts,
no labels, natural red finish
Intrinsically safe, 26 tones, 93 dB(A) output, natural red body color,
no tag or duty labels, 2 × 13/16" entries via knockouts
Copyright© 2013 Eaton’s Crouse-Hinds Business
Speakers & Tone Generators
Hazardous Locations
Weatherproof
5S
Up to 30 Watts
DB12
110dB(A) Sounder—Weatherproof & Heavy Duty
Certification
UL Listed for:
Weatherproof
Certified Ambient Temperature –55°C to +70°C
Certification
Voltage
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
Up to 3 x 20mm
Weight
1kg
No. of Tones
27 + 5 programmable
Options
Body color, voltages 12V & 24V DC
Type
Ordering Code
Cat. #
Standard Product Configuration
CE Certification
115/230V AC
Single Stage
808003
DB12115NN
Weatherproof, dust-tight, no labels, choice of 27 tones,
natural red finish, 3 x M20 knockouts
CE Certification
24V DC
Two Stage
869155
DB12P024NN
Weatherproof, choice of 27 tones, natural red finish,
3 x M20 knockouts
DB15
Certification
110dB(A) Tone Generator—Weatherproof & Heavy Duty
Voltage
Certification
UL Listed for:
Weatherproof
Certified Ambient
Temperature
–55°C to +70°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Entries
2 x M20
Weight
No. of Tones
2.6kg
27 + 5 programmable
Options
Body color, two stage alarm (DB15P) version,
earth continuity, EOL resistor, voltages 12–48V
DC, 110–254V AC
Type
Ordering Code
Cat. #
Standard Product Configuration
Two Stage
808110
CE Certification 12–48V DC
Two Stage
808115
DB15P048NR
Weatherproof, dust-tight, no labels, choice of 27 tones, painted
red finish
CE Certification
240V AC
Single Stage
808120
DB15240NN
Weatherproof, dust-tight, choice of 27 tones, natural gray finish
CE Certification
240V AC
Single Stage
808125
DB15240NR
Weatherproof, dust-tight, choice of 27 tones, painted red finish
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1283
5S
CE Certification 12–48V DC
Weatherproof, dust-tight, no labels, choice of 27 tones, painted
DB15P048NN
gray finish
Speakers & Tone Generators
5S
Hazardous Locations
Weatherproof
Up to 30 Watts
30 Watt Speaker — Hazardous & Ordinary Locations
DB16 UL
Certification
UL Listed for:
cULus, ATEX
Class I, Div. 2, Groups C, D / A, B, C, D
Class I, Zone 1, AExde IIB T3/IIC T110°C
Certified Ambient
Temperature
–61°F to +90°F
–50°C to +40°C
Ingress Protection
NEMA 4X & 6
IP66 & 67
Material
Corrosion-free GRP
Output
Groups C & D:100dB(A) at 1Watt at 10 ft.
112dB(A) at 30 Watts at 10 ft.
3dB(A) less than C & D versions
Groups A, B, C, D:
Entries
Up to 2 x 1/2" NPT or 2 x 3/4" NPT, 20mm,
25mm
Weight
12.1lb/5.5kg
Tappings @ 30 Watts 30, 25, 12, 6, 4, 2
Options:
Certification
Body color, transformer
Ordering Code
Standard Product Configuration
28600006
DB16UCXN2MPN
Unit suitable for gas Groups A, B, C, D, 70V line
transformer, 2 x 1/2" NPT, one certified plug, natural
black finish
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
5S
UL, cUL Listed, Class I, Div 2,
Groups C & D
Cat. #
1284
www.crouse-hinds.com
US: 1-866-764-5454
Speakers & Tone Generators
5S
Hazardous Locations
Weatherproof
Up to 30 Watts
Specification - DB4 Unit
Rated Power:
8, 15 or 25 watts RMS continuous (at 77°F)
Certification:
UL Listed for USA and Canada
– Class I, Div. 2, Groups A, B, C, D
– Class I, Zone 1, AExd IIC T4
UL Listing No. E203310
ATEX approved:
EN50014, 18, 19
Cert. No.BAS00ATEX2097X, Exd IIC T4/T5
Cert. No. BAS00ATEX2098X, ExDC IIC T4/T5
Zones 1 and 2; not for use in atmospheres
containing carbon disulphide
Material:
Body & horn in anti-static, UV stable, glass
reinforced polyester
Swivel bracket in stainless steel
Captive cover screws in stainless steel
Finish:
Body and horn, natural black or epoxy paint coated
to client’s color requirements
Output:
97 dB(A) at 1 watt at 10 feet
109 dB(A) at 25 watts at 10 feet
Measured in accordance with IEC 268
Weight:
11lb/5.0kg approx. dependent on model
Certified Temperature: –67°F to +158°F
–55°C to +70°C
Ingress Protection:
NEMA 4X and 6, IP66 & 67
Frequency Range:
400Hz to 8kHz
Voice Coil Impedance: 8 ohms
Transformer:
Used to vary the rated power by selecting
different tappings (see table below).
Transformer
Tappings
1:2
2:3
3:4
1:3
2:4
1:4
Power
25W
15W
8W
25.0
12.5
6.0
4.0
2.0
1.0
15.0
7.5
5.0
4.0
2.0
0.8
8.0
4.0
2.0
1.5
0.7
0.4
Transformer Options:
i) Loop in/Loop out: (4 x 2) terminal tap change (8 terminals).
ii) Optional Tapping: 4 terminal tap change with 2 terminals (5 & 6) directly
connected to driver (8 ohms).
Ordering Requirements
www.crouse-hinds.com
Mounting:
Bracket with ratchet facility
Labels:
Duty and tag labels optional
Cable Entries:
Up to 2 x 1/2" NPT
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
5S
Other tappings & driver impedances available on request.
8 x 14AWG
Terminals:
Other terminal arrangements available on request
1285
5S
Speakers & Tone Generators
Hazardous Locations
Weatherproof
Up to 30 Watts
Specification—DB5 Unit
Certification:
FM approved for Class I, Div. 1,Groups A, B, C, D,
J.I. 3001835
CSA certified to C22.2 Nos. 0, 0.4, 0.5, 25, 30, 205,
Class I, Groups A, B, D, Cert. No. 79122
ATEX approved, EN50014 and EN50020 & EN50284
Exia IICT4. 12/24V version Cert. No. BAS00ATEX 1259
(unit) and 01E2024 (system)
HSE(M) to EN50014, EN50020
and EN50303
Exia 1 Cert. No.
MECS01ATEX4260 (unit) and
94Y7095 (system)
Material:
A.B.S. (Acrylonitrile Butadiene Styrene)
Finish:
Available in red as standard
Certified Temperature:
–4°F to +131°F
–20°C to +55°C
Weight:
0.7lb/0.3kg
Entries:
Up to 1 x 13/16" on each side via knockouts
Sound Output:
90± 3dB(A) at 10 feet for 12V and 24V versions
Typical max value only—variable with tone
Current Consumption:
5S
24V model—14 mA max. nominal
12V model—12 mA max. nominal
1286
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Speakers & Tone Generators
5S
Hazardous Locations
Weatherproof
Up to 30 Watts
Specification—DB12 Unit
Material:
UV stable glass reinforced polyester. Retained stainless steel cover screws
Finish:
Self colored red as standard or epoxy coated to customer’s specification
Sound Output:
107± 3dB(A) at 1 meter
Typical value only–variable with tone
Volume Control:
Integral volume control
*Nominal Output (dBa)
92
100
104
109
Input Current (mA)
60
70
80
90
*Output measured with 24V input voltage. Tone set to 2850Hz continuous.
Tone Selection:
Single Stage DB12:
Two stage Unit DB12P:
27 user selectable tones
Switchable between any two tones by either:
(i) Reversing the polarity of the supply, or
(ii) by a 3 wire common +ve system, switching between the two -ve
lines.
Note: Two stage unit available in DC versions only.
Weight:
1.0 kg. Dc, 1.2kg AC
Operating Temperature:
–55°C to +70°C
Ingress Protection:
IP66 & IP67
Voltage:
DC: 12V, 24V AC: 115/230V
Current Consumption:
24V operation 55mA–100mA
12V operation 55mA–90mA
Terminals:
6 x 2.5mm2
Labels:
Duty and tag labels available
Cable Entries:
Up to 3 x M20 via knockouts
115V operation 85mA–140mA
230V operation 45mA–60mA
AFNOR NF S 32 001 compliant version available—contact sales office for details.
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each component into the
appropriate box.
5S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1287
5S
Speakers & Tone Generators
Hazardous Locations
Weatherproof
Up to 30 Watts
Specification—DB15 Unit
Material:
Body & horn in UV stable, glass reinforced
polyester
Swivel bracket in stainless steel
Cover screws in stainless steel
Finish:
Body and horn, natural gray to RAL 7035 or
epoxy paint coated to client’s color
requirements
Sound Output:
Volume Control:
DB15 117dB(A) maximum
Integral volume control
*Nominal Output
(dBa)
Input Current
(mA)
100
105
108
110
112
150
250
350
450
550
Tone Selection:
DB15:
27 user selectable tones available.
Additional 5 tones may be programmed.
DB15P (Two stage unit): Switchable between any two of the 27
tones by either:
(i) Reversing the polarity of the supply, or
(ii) by a 3 wire common +ve system,
switching between the two –ve lines.
Note: Two stage unit available in DC versions
(DB15P) only.
5S
AFNOR NF S 32 001 compliant version available—contact sales
office.
*Output measured with 24V input voltage. Tone set to 970Hz
continuous.
Weight:
2.6kg approx. dependent on model
Temperature Range: –55°C to +70°C
Ingress Protection:
IP66 and IP67
Voltage:
Up to 48V DC Up to 254V AC
Current
Consumption:
V
12V DC
24V DC
48V DC
110V AC
120V AC
220V AC
240V AC
254V AC
I
900mA
600mA
280mA
150mA
175mA
93mA
86mA
80mA
Terminals:
4 x 2.5mm2 (AC), 6 x 2.5mm2 (DC)
Earth Continuity:
Available
Mounting:
Stainless steel bracket with ratchet facility
Labels:
Duty and tag labels optional
Cable Entries:
2 x M20 ISO
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
1288
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Speakers & Tone Generators
Hazardous Locations
Weatherproof
5S
Up to 30 Watts
Specification—DB16 Unit
Rated Power:
30 Watts RMS continuous (at 77°F/25°C)
Certification:
UL Listed for USA and Canada
– Hazardous locations:
Class I, Div. 2, Groups C, D, Class I, Zone 1, AExde IIB T3
Class I, Div. 2, Groups A, B, C, D, Class I, Zone 1, AExde IIC T110°C
UL Listing No. E203310
– Ordinary locations: Signalling Speaker; UL Listing No. 58847
CENELEC EN50014, 18, 19
IIB Version: Cert. No. Baseefa04ATEX0166X
ATEX Ex II 2G Exde IIB T3 (Tamb. -50°C to +40°C)
IIC Version: Cert. No. Baseefa04ATEX0167X
ATEX Ex II 2GD Exde IIC T110°C (Tamb. -50°C to +40°C)
Zones 1 and 2
Material:
Body & horn in anti-static, UV stable, glass reinforced polyester
Mounting stirrup and fixtures in stainless steel
Finish:
All natural or body and horn can be painted to client’s requirements
Output:
Groups C, D Version: Maximum output at 1W at 10 feet is 100dBA
Maximum output at 30W at 10 feet is 112dBA
Groups A, B, C, D Version: Maximum output at 1W at 10 feet is 97dBA
Maximum output at 30W at 10 feet is 109dBA
Weight:
12lb/5.5kg approx.
Certified Temperature: 67°F to +104°F (-50°C to +40°C)
Ingress Protection:
NEMA 4X & 6, IP66 & IP67
Voltage:
370Hz to 8kHz
Voice Coil Impedance: 8 ohms
Transformer:
Used by combining the rated power tappings below
Transformer Tapping Options:
Transformer
Tappings
1:2
Power
(W)
30
2:3
25
3:4
12
1:3
6
2.4
4
1.4
2
(ii) Loop in/loop out (2 x 2) 8 ohm; 4 terminals
8 x 2.5mm2
5S
Terminals:
(i) Loop in/loop out (4 x 2) power tap
change; 8 terminals
Earth Continuity: Available via optional earthing stud or by internal earth plate
Mounting:
Via stirrup with ratchet facility
Labels:
Optional stainless steel tag and duty labels
Cable Entries:
Up to 2 x 1/2" NPT or 2 x 3/4" NPT into termination chamber, 20mm, 25mm
Ordering Requirements
The following code is designed to help in the selection of the correct unit. Build up the reference number by inserting the code for each
component into the appropriate box.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1289
5S
Cl. I, Div. 1 & 2, Groups B, C, D
Cl. II, Div. 1 & 2, Groups E, F, G
Cl. III
UL and cUL 464 and 1203 Listed
ETH Flex•Tone™ Series
Signaling Devices
Electronic Signals
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
Eaton's Crouse-Hinds Flex•Tone Series Electronic Signals are
explosionproof, heavy duty, tone-selectable signaling devices
capable of producing volume-controlled, high decibel tones. Certified
for use in Class I, Division 1, Groups B, C, and D applications, the
Flex•Tone Series is ideal for signaling warning or emergency
conditions.
The Flex•Tone ETH855 accepts up to two contact closures and
delivers two audible output signals selected from 55 available tones.
The two tones are selected by setting miniature switches within the
unit. One of the tones can be assigned a priority status to override
the other tone.
The Flex•Tone ETHD855 is diode polarized for applications requiring
electrical supervision of signaling circuit field wiring. The signal
delivers one audible output signal selected from the 55 tones
available.
Applications:
• For use where a high decibel sound is required for alert or
evacuation in hazardous locations.
Features and Benefits:
•
•
•
•
•
Heavy duty zinc cast construction.
55 tone capacity – no additional tone modules needed.
Internal volume control with internal potentiometer.
Corrosion-resistant heat-flowed epoxy finish.
Supplied with factory sealed 1/2" threaded fitting for quick
installation.
• Speaker can swivel 180° vertically or horizontally depending on
orientation of mounting bracket.
• Mounts onto any surface using only three bolts.
• 30" numbered wire leads.
Explosionproof Electronic Signal Stand-Alone Unit
Certifications and Compliances:
•
•
•
•
Class I, Division 1, Groups B, C, D
Class II, Division 1, Groups E, F, G
Class III
UL and cUL 464 and 1203 Listed
Materials and Finishes:
• Body – Heavy duty zinc cast construction
• External hardware – Stainless steel
Ratings:
• 24VDC, 36VDC, 125VDC, 250VDC, 24VAC, 120VAC and 240VAC
(ETH)
• 20 – 31VDC (ETHD)
Output Sound Pressure:
• 109 decibel (dBA) output
5S
Ordering Information:
Cat. #
Voltage
Explosionproof, Two Output
ETH855/24
24VDC
ETH855/36
36VDC
ETH655/24
24VAC, 50 / 60Hz
ETH655/120
120VAC
ETH655/240
240VAC
ETH855/125
125VDC
ETH855/250
250VDC
Signal OFF
Signal ON
Standby Current (Amps) Operating Current (Amps)
0.061
0.077
0.250
0.088
0.091
0.031
0.019
0.250
0.380
0.950
0.260
0.190
0.130
0.070
Diode Polarized, Explosionproof, Single Output For Fire Alarm Applications
Meets min. 75 dBA for fire alarm indication
ETHD855/24
20 – 31VDC
0.061
0.950
1290
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
ETH Flex•Tone™ Series
Signaling Devices
Remote Speaker / Amplifier
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
Cl. I, Div. 1 & 2, Groups B, C, D
Cl. II, Div. 1 & 2, Groups E, F, G
Cl. III
UL and cUL 464 and 1203 Listed
5S
Eaton's Crouse-Hinds Flex•Tone Series Explosionproof Remote
Speaker/Amplifier is designed for remote mounting in Division 1
areas where simultaneous high decibel signaling is required.
Used in connection with the Panel Control Signaling Generator, the
Flex•Tone ETH845 operates directly from local power sources,
allowing remote speaker/amplifiers of different voltages to be
connected within the same system. Available in both AC and DC
voltages, the Flex•Tone can be mixed and matched throughout an
application using the available line power.
ETH845 Series Remote Speaker/Amplifiers must be used with
Eaton's Crouse-Hinds Flex•Tone Panel Control Signal Generator
on next page.
Explosionproof Remote Speaker/Amplifier
Applications:
• For use where simultaneous signaling of a high decibel sound is
required for alert or evacuation in hazardous locations.
Features and Benefits:
•
•
•
•
Heavy duty zinc cast construction.
Individual volume control.
Corrosion-resistant heat-flowed epoxy finish.
Supplied with factory sealed 1/2" threaded fitting for quick
installation.
• Speaker can swivel 180° vertically or horizontally depending on
orientation of mounting bracket.
• Mounts onto any surface using only three bolts.
• 30" numbered wire leads.
Certifications and Compliances:
•
•
•
•
Class I, Division 1, Groups B, C, D
Class II, Division 1, Groups E, F, G
Class III
UL and cUL 464 and 1203 Listed
Materials and Finishes:
• Body – Heavy duty zinc cast construction
• External hardware – Stainless steel
Ratings:
• 120VAC, 240VAC, 125VDC and 250VDC
Output Sound Pressure:
• 109 decibel (dBA) output
Ordering Information:
Cat. #
Voltage
Explosionproof Remote Speaker/Amp
ETH845/24
24VDC
ETH645/24
24VAC, 50/60Hz
ETH645/120
120VAC
ETH645/240
240VAC
ETH845/125
125VDC
ETH845/250
250VDC
Signal OFF
Standby Current (Amps)
Signal ON
Operating Current (Amps)
0.061
0.250
0.088
0.091
0.031
0.091
0.250
0.950
0.260
0.190
0.130
0.070
ETH845 Series Remote Speaker/Amplifiers must be used with Eaton's Crouse-Hinds Flex•Tone Panel Control Signal Generator on next page.
5S
ETH845 Series Remote Speaker/Amplifiers accept a 10VAC audio signal from Flex•Tone Panel Control Signal Generator.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1291
5S
ETH Flex•Tone™ Series
Signaling Devices
Cl. I, Div. 2, Groups A, B, C, D
Cl. II, Div. 2, Groups F, G
Cl. III
UL 464 and 1604 Listed
NEMA 3R, IP44
Control Signal Generator
Eaton's Crouse-Hinds Flex•Tone Series Panel Control Signal
Generator controls and initiates a synchronous signaling sound from
all Flex•Tone 3 Remote Speaker/Amps installed in a system. The
Panel Control Signal Generator is mounted in a Division 2 area, while
controlling the Flex•Tone 3 Speaker/Amps that are remotely
mounted in Division 1 areas.
The Panel Control Signal Generator produces 27 sounds. Four tones
may be activated from field-wired, normally open contacts, or a
24VDC or 120VAC external voltage source such as an output from a
PLC.
Certifications and Compliances:
• Hazardous area applications calling for high decibel output with
simultaneous signal delivery over all speakers installed in a system
• Emergency warning systems, plant evacuation alarms, security
intrusion alarms, process monitoring, shift start and dismissal
horns, and paging signals
•
•
•
•
•
•
•
Features and Benefits:
Materials and Finishes:
•
•
•
•
•
•
• Zinc-cast construction with an epoxy powder coat finish
Applications:
27 tone capability – no additional tone modules needed
Centralized programmable tone selection
PLC compatible
System-wide priority tone
24 VDC battery back-up terminals
Short circuit protected
Class I, Division 2, Groups A, B, C, D
Class II, Division 2, Groups F, G
Class III
UL 464 and 1604 Listed
cUL C22.2 No. 205
CE Marked – CENELEC LV and EMC Directives
NEMA 3R, IP44
Ratings:
• See table below
5S
Ordering Information:
Cat. #
Voltage
Panel Control Signal Generator
ETH840/24E74
24VDC
ETH640/24E13
24VAC, 50/60Hz
ETH640/120E36
120VAC, 50/60Hz
ETH640/120M38
120VAC, 50/60Hz
ETH640/120E32
120VAC, 50/60Hz
ETH640/240E20
240VAC, 50/60Hz
ETH840/125E21
125VDC
ETH840/250E10
250VDC
ETH640/120M31
120VAC, 50/60Hz
ETH640/240M20
240VAC, 50/60Hz
ETH840/125M20
125VDC
ETH840/250M10
250VDC
ETH640/120R31
120VAC, 50/60Hz
ETH640/240R20
240VAC, 50/60Hz
ETH840/125R20
125VDC
ETH840/250R10
250VDC
Input Card
Activation Voltage
Signal OFF
Standby Current (Amps)
Signal ON
Operating Current (Amps)
24VDC
24VDC
24VDC
120VAC
24VDC
24VDC
24VDC
24VDC
120VAC
120VAC
120VAC
120VAC
RS485
RS485
RS485
RS485
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.02
0.10
0.10
0.10
0.02
0.10
0.10
0.10
0.02
0.74
1.30
0.36
0.38
0.32
0.20
0.21
0.10
0.31
0.20
0.20
0.10
0.31
0.20
0.20
0.10
Flex•Tone Panel Control Signal Generator must be used with Eaton's Crouse-Hinds ETH845 Remote Speaker/Amps on previous page.
Dimensions
In Inches:
1292
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
ETH Horn Signals
Factory Sealed
5S
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
Cl. I, Div. 1 & 2, Groups B†, C, D
Cl. II, Div. 1, Groups E, F, G
Cl. II, Div. 2, Groups F, G
Cl. III
NEMA 7B†CD, 9EFG
Applications:
ETH horn signals are used:
• For call signals, alarms, and various other signalling applications
• In specific hazardous atmospheres as found in chemical plants,
oil and gas refineries, bulk loading stations, paint and varnish
manufacturing plants, grain processing industries and grain
elevators, as well as in certain metal, coal, combustible fiber
processing or handling areas
• In conduit systems and mounted on a flat surface with the
projectors aimed in the desired direction
ETH grill type horn signal
Table 1
Features:
• No external conduit seal is required.
• The AC signals do not have arcing contacts.
• The DC horns have factory sealed wire leads in the interconnecting
nipple and hub.
• The body cover joint of AC horn signals is of serrated construction,
machined to close tolerance to ensure flametightness and secured
by a clamping ring. The DC unit has a ground joint design.
Operating Current in Amperes at the Nominal
Voltage for Horn and Siren Signals
Horn Signal
Amperes
Single Projector
Nom.
Volts
Certifications and Compliances:
Grill Type
50 to 60 hertz AC
ETH2313,
ETH2316,
ETH2312
0.625
0.13
0.065
50 to 60 hertz AC
ETH2702, ETH2703
—
.45
.2
• NEC:
Class I, Division 1 & 2, Groups B†, C, D
Class II, Division 1, Groups E, F, G
Class II, Division 2, Groups F, G
Class III
• UL Standard: 464, 1203
• CSA Standard: C22.2 No. 30
24
115
230
Standard Materials:
Single Projector Horn Signal
115
33
50 to 60
230
33
hertz AC
105 dB
105 dB
1
Grill Type Horn Signals
24
50 to 60
115
49
hertz AC
230
100 dB
100 dB
100 dB
3
Size Ranges:
DC
100 dB
3
• Hub – 1/2" or 3/4" size
Dimensions
DC
ETH2416
0.16
Ordering Information:
Supply
• Copper-free aluminum
Standard Finishes:
• Natural
Nom.
Volts*
24
Minimum
audibility
rating (dB)
at 10':
Nom.
Watts
30
Hub
Size
Cat. #
/2
/2
ETH2703
ETH2702
/4
/4
3
/4
ETH2316
ETH2313
ETH2312
/4
ETH2416
1
3
In Inches:
Sound Levels:
• See Ordering Information table for individual ratings
5S
Electrical Rating Ranges:
• Nominal voltage – 24, 115, 230 VAC 24 VDC
Single Projector
†Grill type horns are certified for Group B.
* See Table 1 for more complete ratings
Grill Type
Dimensions are approximate, not for construction purposes.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1293
5S
W2H Signaling Devices
Cl. I, Div. 2, Groups A, B, D
Cl. II, Div. 2, Group G
NEMA 3, 7ABCD (Div. 2), 9G (Div. 2)
Raintight
Dust-tight
Wet Locations
Applications:
W2H series signaling devices are used:
• As independent audible signal or warning devices
• In Class I, Division 2, Groups A, B, C, D hazardous areas where
flammable vapors or gases may be present due to accidental or
abnormal operation
• In Class II, Division 2, Group G hazardous areas where
combustible dusts may be present due to accidental or abnormal
operation
Features:
• The W2H is solid-state, compact, rugged but lightweight. The
system is programmable, which allows the convenience of tone
selection, without the need for separate tone modules. Each unit
can be programmed for any one of four different tones (whoop,
wail, hi-lo and horn), by wiring to the corresponding terminal on
the unit’s terminal strip. Separate sound modules not required.
• Unit may be field wired for multiple signal selection by manual or
automatic control.
• 180° speaker rotation allows flexibility in direction of sound.
• Corrosion-resistant conformal coating protects the printed circuit
and other interior components.
Signal Selection:
Signal
Terminal
#4 Whoop
Sound
Description
Ascending low to
high, repeated
Audible
Frequency
Repetition
Rate
Low tone – 400 Hz
High tone – 850 Hz
48 cy/min.
48 cy/min.
#5 Wail
Conventional Siren
400 – 1100 Hz
24 cy/min.
Alternating Hi-Lo
Low tone – 650 Hz
High tone – 850 Hz
24 cy/min.
24 cy/min.
Steady
630 Hz
Continuous
Certifications and Compliances:
• UL Standard: 1203
• NEC:
Class I, Division 2, Groups A, B, C, D
Class II, Division 2, Group G
• NEMA 3, 7ABCD Division 2, 9G Division 2
#6 Hi-Lo
#7 Horn
Electrical Rating Ranges:
Standard Materials:
• Nominal voltage – 24, 120, 240 AC; 60 Hz 24 DC
• Body – die-cast aluminum
• Projector – spun aluminum
• Hardware – stainless steel
Ordering Information - Normal Power
Standard Finishes:
24VDC
24VAC
120VAC
240VAC
Nominal
Voltage
• Body and projector – gray hammertone enamel
• Stainless steel – natural
Operating
Current
0.55A
1.25A
0.27A
0.15A
Standby
Current
0.06A
0.13A
0.03A
0.02A
Dimensions
Sound Levels:
In Inches:
5S
• Minimum audibility rating (dB) at 10': W2H Series – 93dB
Dimensions are approximate, not for construction purposes.
1294
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Cat. #
W2H840
W2H640
W2H620
W2H660
WH Vibrating Horn Signals
Weather Resistant
5S
Applications:
WH vibrating horn signals are used:
• For code or call signals, or as a general alarm in a signal system
that might involve hours of continuous operation
• In non-hazardous atmospheres of industrial areas such as
warehouses, yards, exteriors of buildings, and in-plant areas
• Mounted on walls or other flat surfaces with projectors aimed in a
desired direction
Features:
• The joint between the body and horn assembly is gasketed for
raintightness
WH with grill
WH with single projector
Certifications and Compliances:
• UL Standard: 464
Standard Materials:
• Copper-free aluminum and die cast zinc
Standard Finishes:
• Gray hammertone enamel
Capacity Ranges:
WH with double projector
• Minimum audibility rating (dB) at 10':
AC – 87 decibels
Electrical Rating Ranges:
• Nominal voltage
120 AC, 50 / 60 hertz
• Operating characteristics
Voltage range +10%, –20%
Nominal watts – 18 VA on 120 VAC
Ordering Information
Nominal
Voltage
Nominal Voltage
Grill Cat #
Single Projector Cat. #
Double Projector Cat. #
.15
120 AC 50 to 60 Hz
WH13503
WH13513
WH13523
Dimensions
In Inches:
5S
Dimensions are approximate, not for construction purposes.
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1295
5S
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
Cl. I, Div. 1 & 2, Groups B, C, D
Cl. II, Div. 1, Groups E, F, G
Cl. II, Div. 2, Groups F, G
Cl. III
ESR Bell Signals
Factory Sealed
Applications:
ESR bell signals are used:
• For call signals, alarms, or in various other signalling applications
• In specific hazardous atmospheres such as in chemical plants, oil
and gas refineries, bulk loading stations, paint and varnish
manufacturing plants, grain processing industries and grain
elevators, as well as in certain metal, coal, combustible fiber
processing or handling areas
• In conduit systems, and mounted on a vertical flat surface with the
striker at the bottom
Features:
5S
• The conduit hub contains an integral bushing.
• The body cover assembly permits the location of a hub at the top,
bottom or either side (the striker must be located at the bottom for
proper operation).
• There are no external seals required except when used in
Group B hazardous areas.
• The AC signal does not have arcing contacts.
• Binding screw terminals are provided in AC signals for supply
conductors.
• A vibrating or single stroke striker mechanism is furnished with
6 or 10 inch diameter gongs.
Size Ranges:
• Hub – one 3/4" size
Sound Levels:
• See Table 1 below for individual ratings
Electrical Rating Ranges:
• Nominal voltage – 12, 24, 48, 115, 230 AC
Certifications and Compliances:
See Table 1 for complete ratings.
Standard Units:
• NEC/CEC:
Class I, Division 1 & 2, Groups C, D
Class II, Division 1, Groups E, F, G
Class II, Division 2, Groups F, G
Class III
NEMA/EEMAC: 7CD, 9EFG
• UL Standard: 464, 1203
• CSA Standard: C22.2 No. 30
Group B Units:
• NEC/CEC:
Class I, Division 1 & 2, Groups B, C, D
Class II, Division 1, Groups E, F, G
Class II, Division 2, Groups F, G
Class III
NEMA/EEMAC: 7BCD, 9EFG
• UL Standard: 464, 1203
• CSA Standard: C22.2 No. 30
Dimensions
In Inches:
Dimensions are approximate, not for construction purposes.
Dia. Gong
a
b
c
6
10
6
10
63/4
103/4
51/4
6
Standard Materials:
• Body – Feraloy® iron alloy
• Cover – copper-free aluminum
• Junction box
body – Feraloy iron alloy
cover – copper-free aluminum
• Gong – steel
Table 1
Operating Current in Amperes at the Nominal
Voltage For Bell Signals
Standard Finishes:
• Feraloy iron alloy – electrogalvanized and aluminum acrylic paint
• Aluminum – natural
• Steel – gray matte
1296
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Nom. Volts
Amperes
All Vibrating
25 to 60 Hz AC
All Single Stroke
50 to 60 Hz AC
12
24
48
115
230
1.67
.53
.44
.189
.092
1.75
.62
.41
.189
.086
Copyright© 2013 Eaton’s Crouse-Hinds Business
ESR Bell Signals
Explosionproof
Dust-Ignitionproof
Raintight
Wet Locations
Cl. I, Div. 1 & 2, Groups B, C, D
Cl. II, Div. 1, Groups E, F, G
Cl. II, Div. 2, Groups F, G
Cl. III
Factory Sealed
5S
Ordering Information:
Hub
Size
/4
3
Supply
Nom.
Volts
Voltage
Range
12
24
48
115
230
9.6 to 13.2
19.2 to 26.4
38.4 to 52.8
92 to 126.5
184 to 253
12
24
48
115
230
9.6 to 13.2
19.2 to 26.4
38.4 to 52.8
92 to 126.5
184 to 253
Vibrating Hammer
(25 to 60 hertz)
Standard
Group B
Units Cat. #
Units‡ Cat. #
Minimum
audibility
rating
(dB) at 10':
Single Stroke
Hammer
(50 to 60 hertz)
Cat. #
Minimum
audibility
rating
(dB) at 10':
6
ESR2675
ESR2674
ESR2673
ESR2672
ESR2671
ESR2675
ESR2674
ESR2673
ESR2672
ESR2671
GB
GB
GB
GB
GB
67
82
88
88
85
ESR2665
ESR2664
ESR2663
ESR2662
ESR2661
64
64
67
67
67
10
ESR2615
ESR2614
ESR2613
ESR2612
ESR2611
ESR2615
ESR2614
ESR2613
ESR2612
ESR2611
GB
GB
GB
GB
GB
82
85
85
91
85
ESR2625
ESR2624
ESR2623
ESR2622
ESR2621
64
64
67
67
67
Dia.
Bell
AC
‡ Install seal within 11/2" of conduit opening.
5S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1297
5S
5S
1298
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Combination Visual &
Audible Signaling Devices
6S
Hazardous
Description
Page No.
Combination Units - MEDC Series
DB3/SM87
DB3/XB11
DB12/XB13
see pages 1300–1301
see pages 1300–1301
see pages 1300–1301
6S
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1299
6S
Hazardous Locations
Weatherproof
Visual and Audible
Combination Units
MEDC Series
Truly a unique product offering with integral visual and audible
signaling devices pre-wired for simultaneous output activation.
•
•
•
•
Suitable for Class I, Division 2 applications
Strobe light and audible tone generator in one package
Mounts with ease and facilitates quick field wiring
UL, cUL, Ex and ATEX for worldwide acceptance
This range of lightweight all GRP, explosionproof horns intended for
use in potentially explosive atmospheres has been designed with
high ingress protection to cope with the harsh environmental
conditions found offshore and onshore in the oil, gas and
petrochemical industries.
The flamepaths, flare, and body are manufactured completely from a
UV stable glass reinforced polyester. Stainless steel screws and
sinter are incorporated thus ensuring a corrosion-free product. A
tapered flamepath is used to overcome the problems of assembly of
parallel spigot flamepaths.
Features and Benefits:
•
•
•
•
•
All GRP corrosion-free
Up to 108dBA output at 10 feet
Integral volume control
27 tones, user selectable
Horn/Strobe Combination Unit available
Horn/Strobe Combination Unit
Certifications and Compliances:
6S
• UL Listed for USA and Canada
Hazardous locations:
Class I, Div. 2, Groups A, B, C, D
Class I, Zones 1 & 2, AExd IIC T4
Ordinary locations: Audible Signal device
• ATEX approved
• NEMA 4X & 6, IP66 & 67
• Certified temperature
–67°F to +158°F
–55°C to +70°C
1300
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Visual and Audible
Combination Units
6S
Hazardous Locations
Weatherproof
MEDC Series
Visual & Audible Combination Units—Hazardous Locations, Weatherproof
Certification
Voltage
Lens/Body
Color
Ordering
Code
Cat. #
ATEX Ex II 2GD
24V DC
Red/Red
803130
DB3/XB11B24V RED/RED
UL, cUL Listed, Class I,
Div. 2, Groups C, D
24V DC
Red/Natural
Black
869200
DB3/XB11UL24V RED/NB
UL, cUL Listed, Class I,
Div. 2, Groups C, D
24V DC
Red/Red
869205
DB3/XB11UL24V RED/RED
UL, cUL Listed, Class I,
Div. 2, Groups C, D
110V AC
Red/Red
869210
DB3/XB11UL110V RED/RED
Voltage
Lens/Body
Color
UL, cUL Listed, Class I,
Div. 1, Groups C, D
24V DC
Red/Red
UL, cUL Listed, Class I,
Div. 2, Groups C, D
24V DC
Red/Red
Certification Voltage
Ex II 2GD
24V DC
Lens/Body
Color
Red/Red
Ordering
Code
DB3/XB11, GRP material, NEMA 4X & 6,
choice of 27 tones, 106dB(A) at 10 feet
output, 29 Cd, no labels,
1 x ½" NPT entries
Standard Product
Configuration
24V DC, alloy sounder, interconnected
62500182 DB1P/SM87HXBUL 24V RED/RED to, painted red stainless steel baseplate,
alloy 5 joule beacon
GRP sounder interconnected to,
62500183 DB3/SM87HXBUL 24V RED/RED
painted red stainless steel baseplate,
alloy 5 joule beacon
Cat. #
Ordering
Code
62500009
www.crouse-hinds.com
Cat. #
Standard Product Configuration
DB12/XB13 24V RED/RED
IP66 & 67 weatherproof only, 24V DC, GRP
sounder interconnected to, on a painted red
stainless steel baseplate, a IP66 & 67
weatherproof only, GRP 10 joule beacon
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
1301
6S
Certification
Standard Product
Configuration
DB3/XB11, Exd IIB T5, choice of 27 tones,
115dB(A) at 1m output, 29 Cd, no labels,
1 x M20 entry
6S
6S
1302
www.crouse-hinds.com
US: 1-866-764-5454
CAN: 1-800-265-0502
Copyright© 2013 Eaton’s Crouse-Hinds Business
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising