Spot Coolers Vacuum Cleaners Sweepers Industrial Fans Portable

Spot Coolers Vacuum Cleaners Sweepers Industrial Fans Portable
Spot Coolers
Vacuum Cleaners
Sweepers
Industrial Fans
Portable Exhaust Fans
Dust Collectors
Hot Air Dryers
www.suiden.com
Contents:
3. Spot Coolers
5. Industrial Fans
A Word from the President
“Our purpose as a company is
to provide you with products
that improve your working
environment and make your
7. Vacuum Cleaners
10. Sweepers
work easier”
Yuji Kawai
President
Suiden Co., Ltd
11. Portable Exhaust Fans
13. Dust Collectors
14. Hot Air Dryers
14. Ventilation Fans
Company History
1947
Yuzo Kawai founded the company in Osaka, Japan, and shortly thereafter introduced the
first range of fans for industrial use on the
Japanese market.
1957
Due to increased demand the first factory was
built in Ikuno in Osaka.
1961
The company was reorganized as a limited
company with 800,000 yen in capital under
the name Suidensha Co., Ltd.
1964
The Nara factory was built in Sango, Nara
prefecture, Japan.
1972
The company name was changed to Suiden
Co., Ltd. 1982
The company headquarter building was built
in central Osaka.
1988
Taiwan Suiden Co., Ltd. was established.
1991
The capital of Suiden was increased to
367,600,000 yen.
1992
Suiden launched their first Spot Coolers.
2002
Yuji Kawai takes over the post of president
and CEO.
2004
Dongguan Suiden Co., Ltd. is established in
mainland China.
2011
Suiden commences a sales expansion plan
throughout South East Asia
2012
Suiden celebrates its 65 year anniversary
Website: www.suiden.com
E-mail: info@suiden.com
Tel:
+81 (0) 6-6772-0850
Fax:
+81 (0) 6-6772-9898
Suiden’s
Tottori Factory
International
This is our main manufacturing
facility in Japan. Here most
vacuum cleaners, hot air
dryers and industrial fans are
Manufacturing
manufactured.
Network
Nara Factory
This facility is in charge of
product development, quality
inspection and repairs. Here
is also where most dust
collectors are manufactured.
Taiwan Suiden Co., Ltd.
This manufacturing facility produces various kinds of industrial fans, as well
as motors and other parts that are later
distributed to our other factories in Japan
and Mainland China.
Dongguan Suiden Co., Ltd.
Our Dongguan factory is growing rapidly with
several new product lines being added every
year. Here is where Suiden’s products made for
the Chinese market and for exports are being
manufactured.
Spot Coolers
Portable
Powerful cooling effect
No installation required
Low running cost
Can also be used to:
Relieve the heat and improve efficiency
Cool down overheating
machinery
Cool down products or parts after
heating processes
Hot air
Hot air
Hot air
Cool air
■ As soon as you plug
in your spot cooler, it
is ready for use. No
additional installation is
required.
Provide heat relief for people
waiting in lines
■ Hot exhaust air is
forcefully blown upwards
to the ceiling, and
doesn’t effect the area
being cooled.
Cool down your steaming kitchen
Stop unnecessary spending on expensive
central air conditioning systems
Instead...
strategically place
spot coolers
only where
needed!
Save
money on
both initial investment,
and then every day on lower
running costs
3
Made in China
SS-22ED-8A SS-22DD-8A •
•
•
For One Person
For One Person | Automatic Swing
Model number
SS-22DD-8A
SS-22ED-8A
Yes
No
Power supply
90º Automatic swing
800 W
Refrigerant
R22
Power cord length
2m
Net weight
Against walls on 3 sides
37 kg
Drain tank capacity
5 L (Mini drain)
Electric cable and plug
Flexible ducts
Cable: 2 m / Electric plug not included
Dimensions (mm)
W 390 x D 430 x H 808 (Not including air ducts)
Operation safety range
SS-40EC-8A SS-40DC-8A -
300º Swing range
2.2 kW / 7,500 BTU
Power consumption
25ºC (50%) - 45ºC (40%)
13,500 BTU
For Two People
For Two People | Automatic Swing
Portable cooler with two cool air duct outlets for two people or two workstations.
Very space efficient. Can be placed directly against walls or other objects on three sides.
With the automatic swing function of SS-40DC-8A both ducts smoothly swing in a 90º
angle, providing a pleasant cooling effect for your working area.
Model number
Automatic swing
Power supply
SS-40DC-8A
SS-40EC-8A
Yes
No
1.65 kW
Refrigerant
R22
Net weight
71kg
Drain tank capacity
SS-56EC-8A -
Cable: 2 m / Electric plug not included
W 470 x D 520 x H 1120 (Not including air ducts)
25ºC (50%) - 45ºC (40%)
For Three People
19,000 BTU of portable cooling power. The three cool air outlet ducts make it perfect
for cooling three people or three workstations.
Direct all the duct outlets in the same direction for amplified cooling effect.
Space efficient design. Can be placed directly against walls on two sides.
Model number
Automatic swing
Power supply
Cooling capacity
Power consumption
No
2.43 kW
92kg
Operation safety range
Against walls on 2 sides
5.6 kW / 19,000 BTU
Net weight
Dimensions (mm)
For three people
Single phase 220V , 50Hz
R22
Electric cable and plug
19,000 BTU
SS-56EC-8A
Refrigerant
Drain tank capacity
Flexible ducts
8 L (Mini drain)
Electric cabled and plug
Operation safety range
Against walls on 3 sides
4.0 kW / 13,500 BTU
Power consumption
Dimensions (mm)
For two people
90º Automatic swing
Single phase 220V , 50Hz
Cooling capacity
•
•
7,500 BTU
For one person
Single phase 220V , 50Hz
Cooling capacity
•
Portable Spot Coolers
Light and portable air cooler with one cool air duct for one person, workstation or machine.
Very space efficient. Can be placed directly against walls or other objects on three sides.
The automatic swing function of SS-22DD-8A provides a very wide and smooth cooling effect.
Automatic swing
•
•
•
220V Models
Flexible ducts
20 L
Cable: 2 m / Electric plug not included
W 490 x D 600 x H 1120 (Not including air ducts)
25ºC (50%) - 45ºC (40%)
4
Ceiling Spot Cooler
SS-25CG-1 SS-25CG-3 -
100V / 200V Model
Single phase 100V
3 phase 200V
|
Made in Chaina
Ceiling Type Spot Cooler
• Perfect for cramped work areas that do not have any free
space on the floor.
• Can be installed in the ceiling, on the wall, on a pillar or on a
stand.
• The cool air duct can be connected in three possible places
which gives great flexibility.
• Is controlled from the ground via wired remote that is
delivered with 4m cord.
7,500 BTU
|
Perfect for Cramped Work Areas
Model number
SS-25CG-1
SS-25CG-3
Power supply
Single phase 100V
3 phase 200V
Cooling capacity
2.2 kW / 7500 BTU
Power consumption
760W
Compressor safety
devices
■ Overheat relay
■ 2 x Reverse-phase
protection relay
■ Fan protecting thermostat
730W
■ Overheat relay
■ Fan protecting thermostat
Refrigerant
R407C
Net weight
35 kg
Electric cord
Dimensions (mm)
4m
Not included
W 440 x D 525 x H 400 (Not including air duct)
25ºC (50%) - 45ºC (40%)
Operation safety range
Wired
Remote
Control
Potable Spot Cooler
SS-16MU-1 -
100V / 200V Model
Single phase 100V
|
Made in China
Compact Model
Compact and easy move spot cooler.
The compact design and its mere 21kg make it the perfect,
Choice when easy mobility is essential. Can be placed anywhere,
Taking up very little space.
Model number
Automatic swivel
Power supply
Cooling capacity
5
No
Single phase 100V
1.6 kW / 5500 BTU
Power consumption
530W
Compressor safety
devices
■ Overheat relay
■ Fan protecting thermostat
Refrigerant
R407C
Net weight
21 kg
Electric cable
21kg
SS-16MU-1
Dimensions (mm)
Operation safety range
2m
W 460 x D 250 x H 547 (Not including air duct)
25ºC (50%) - 45ºC (40%)
Spot Cooler Accessories
Spot Cooler Accessories
1
Standard
Cool Air Duct
2
Standard
Exhaust Air Duct
3
Cool Air Extension Duct
4
Exhaust Air Extension
Duct
5
Duct Clamp
6
Standard Dust Filter
7
Heavy Duty Filter
8
Oil Mist Filter
9
Cool Air Duct Elbow
10
Suspension Hooks
Accessory
1
Standard Cool Air Duct
2
Standard Exhaust Air Duct
3
4
5
6
7
8
Cool Air Extension Duct
Exhaust Air Extension duct
Duct Clamp
Standard Dust Filter
Heavy Duty Dust Filter
Oil Mist Filter
9
Cool Air Duct Elbow
10
Suspension Hooks
Applicable models
Measurements
SS-22, SS-40, SS-56
ø114 x 400mm
SS-22
ø175 x 400mm
SS-40
ø200 x 360mm
SS-56
ø250 x 360mm
SS-22, SS-40, SS-56
ø125 x 5m
SS-22
ø175 x 4m
SS-40
ø225 x 4m
SS-56
ø250 x 4m
SS-22, SS-40, SS-56
ø125, ø175, ø225, ø250
SS-22
625 X 324
SS-40
800 X 454
SS-56 ( Large )
720 X 424
SS-56 ( Small )
495 X 282
SS-22
625 X 319
SS-40
770 X 480
SS-56 ( Large )
750 X 570
SS-56 ( Small )
500 X 330
SS-22
625 x 319
SS-40
800x 454
SS-56 ( Large )
717 x 424
SS-56 ( Small )
500 X 280
SS-22, SS-40, SS-56
-
SS-22
-
6
Vacuum Cleaners
SV-2001EG-8A •
•
•
220V Models
Made in China
Almigthy Vacuum Cleaner | Wet - Dry - Oil - Metal Swarf | Removable tank
This versatile high-power vacuum cleaner with its ability to clean any dry or wet waste,
including oil, will meet any imaginable need you might have at your place of work.
Model number
SV-2001EG-8A
The detachable waste tank on wheels makes waste disposal very easy. Just pull the lever on
the side and the waste tank will gently be lowered down to the ground. After that just roll it
over to the garbage or liquid disposal site. The tank is reattached just as easily.
Power supply
Single phase 220V
Max vacuum pressure
The extreme suction power in combination with the 50 diameter hose lets you clean even
large objects from the ground.
18.0 kPa
Suction air volume
4.8 m³/min
Power consumption
2200W
Tank capacity
Dry: 40L / Wet: 35L
Net weight
51kg
Hose
Extreme
Suction
Power
Diameter: 50 mm / Length: 3m
Electric cable length
20 m
Dimensions (mm)
W550 x D800 x H1010
Just pull the lever to release the tank
1. Ø50 GLMM hose (3m)
2. Ø50 Straight extension pipes (2 pcs)
3. Ø50-30 T-shaped nozzle
4. Ø50 Crevice nozzle
5. Bag attachment (Not in pic.)
SPSV-110-8A SPSV-110L-8A -
10L Tank
22L Tank
Wet - Dry - Oil-mixed Metal Swarf
•
Powerful and versatile vacuum cleaners with very easy maintenance.
•
The water-washable stainless steel tanks and filters make them very suitable
for establishments with strict regulations regarding food and sanitation.
•
The special metal swarf filter allows you clean large quantities of metal swarf,
even swarf covered with oil, without damaging the normal filter.
•
The anti-tipping base ensures safe use.
Water Washable Stainless Steel Tank
Model number
SPSV-110-8A
Power supply
Max vacuum pressure
23.0 kPa
Suction air volume
2.7 m³/min
Power consumption
1100W
Tank capacity
SPSV-110L-8A
SPSV-110L-8A
Single phase 220V
Dry: 10L / Wet: 7L
Dry: 22L / Wet: 20L
14 kg
16 kg
Net weight
Hose
Diameter: 32 mm / Length: 2m
Electric cable length
8m
Dimensions (mm)
W370 x D410 x H485
W400 x D420 x H780
SPSV-110-8A
The stainless steel tank
can be washed with
water, which makes
maintenance a breeze
①
⑥
②
③
⑤
④
7
1.
2.
3.
4.
5.
6.
Ø38 T-shaped floor nozzle
Ø38 Cut nozzle
Ø38 Crevice nozzle
Ø38 Aluminium straight extension pipe
Ø38 Aluminium handle piece
Ø38 Hose (2m)
Made in Japan
SGV-110 -
Vacuum Cleaners
100V / 3ph 200V
Almighty Vacuum Cleaners | Wet - Dry - Oil - Sludge
•
One vacuum cleaner for all your cleaning needs. It can clean both wet and dry, and with its powerful motor it can handle even oil substances and sludge.
•
The top part is the same for all models, so you can freely change the tank to suit your needs.
•
You can also replace the All-Mighty filter with one of the specialized filters shown below. The DP-filter is suitable for fine dust and powder, the DR-filter is suitable for
paper dust, glas dust and FRP, and the DS-filter is suitable for cleaning material that generates static electricity.
1. Ø38 Hose (2.0m)
2. Ø38 Straight extension pipe
3. Ø38-25 T-shaped floor nozzle
4. Ø38-20 Nozzle for liquids
5. Ø38 Crevice nozzle
SGV-110ALN
(Drain hose attached)
SGV-110A
Almighty filter
Dust shaking
lever
SGV-110A-PC
SGV-110AL
Model number
SGV-110A
SGV-110AL
Power supply
SGV-110ALN
SGV-110A-PC
Single phase 100V
Max vacuum pressure
30.0 kPa
Suction air volume
2.6 m³/min
Power consumption
1100W
Tank capacity
Dust: 22L / Liquids: 16L
Dust: 44L / Liquids: 37L
Dust: 44L / Liquids: 37L
Drain hose
No
No
Yes
No
Net weight
20.5 kg
23.0 kg
23.5 kg
14.5 kg
W474 x D600 x H963
W336 x D336 x H682
Hose
Diameter
Dust: 12L / Liquids: 8L
38 mm
Length
2m
Electric cable length
8m
Dimensions (mm)
W474 x D520 x H764
W474 x D600 x H963
The above models can
SGV-110DP
SGV-110DS
SGV-110DR
also be equipped with the
SGV-110DPL
SGV-110DSL
SGV-110DRL
following filters:
SSV-Series •
•
Dust & Powder
SGV-110DP-PC
Anti Static
SGV-110DS-PC
Glass & Paper Dust
Almighty Vacuum Cleaners | Suitable for 24h/day operation
Very powerful and durable. Can be in operation 24 hours a day. Suitable to be used as a dust collectors.
Easy waste disposal system. The wheel equipped tank can be detached from the main unit and easily
rolled to place of disposal.
Model number
SSV-103A
Power supply
Max vacuum pressure
Suction air volume
Power consumption
SSV-203A
SSV-303A
3 phase 200V
12.0 kPa
16.0 kPa
18.5 kPa
1.8 m³/min
3.0 m³/min
4.5 m³/min
0.8kW
1.5kW
2.4kW
Rated current
3.0A
5.5A
8.2A
Tank capacity
Dust: 30L
Liquids: 30L
Dust: 36L
Liquids: 36L
Dust: 36L
Liquids: 36L
61.5 kg
107.0 kg
Net weight
Hose
Diameter
Length
Dimensions (mm)
1.
GLMM Hose
2.
Extension tube (2pcs)
3.
T-shaped floor nozzle
4.
Crevice nozzle
5.
Nozzle for liquids (only SSV-103A)
Suitable for 24
Operation
120.0 kg
38 mm
50 mm
2m
3m
Electric cable length
Accessories:
10 m
450 x 805 x 750
515 x 1015 x 910
8
Vacuum Cleaners
100V / Pneumatic
Made in Japan
Clean Room Vacuum Cleaner
SCV-110DP -
Clean Room Vacuum Cleaner | Double Filter System: ULPA-Filter + Fine Dust/Powder Filter
ULPA-Filter
Where do you need a clean room vacuum cleaner?
Due to the increasing demand for particle free environments for research
and manufacturing, the use of Clean rooms is increasing every year.
Here are just a few examples :
- Hospital test labs
- Laboratories
- Research facilities
- Sensitive manufacturing and assembly spaces
Suiden Double Filtration Clean Room Vacuum Cleaner is an indispensable
cleaning tool that ensures that your clean room stays particle free.
Filters ≥ 0.1 μm dust particles
to 99.99%
DP-Filter
The Fine Dust/Powder filter
handles ≥ 2 μm particles
DP and ULPA two filter system
This Clean Room vacuum cleaner applies fine dust and powder (DP) filter
and the ULPA-filter, that filters dust particles down to 0.1 micron to 99.99%
(Compare HEPA-filter: ≥ 0.3 μm to 99.97%). The DP-filter allows you to clean
large amount of dust and powder, and the ULPA-filter on the exhaust side
makes sure that no particles escape back into the air.
Low speed exhaust air prevents particle dispersion
The low exhausted air speed prevents dust particles on surfaces to stir up
into the air, which improves the end result remarkably.
Antistatic hose
The hose is equipped with an antistatic string that leads the static
electricity through the stainless steel body and down to the floor.
Model number
Easy maintenance
The entire unit is made of stainless steel to prevent corrosion,
and can therefore be cleaned with water.
SCV-110DP
Power supply
Max vacuum pressure
Suction air volume
Accessories:
1. Ø38 Hose (2m), complete with anti-
2.5 m³/min
1150W
Rated current
11.5 A
Tank capacity
12 L
16.0 kg
Diameter
Hose
3. Ø38-25 Floor nozzle
4. Ø38 Crevice nozzle (large)
38 mm
Length
2m
Electric cable length
8m
Dimensions (mm)
Virtually no
Running Cost
SAC-100 -
W340 x D366 x H697
Pneumatic Vacuum Cleaner | Wet & Dry
•
Is powered with compressed air and does hence not require any electrical power source. If you
already have a compressed air system in your factory, just connect the unit to it with an air hose.
•
Extremely durable since it does not contain any moving parts. Can be used many hours on end.
•
Easy maintenance with a pail tank body.
•
Use it with a compressor that provides over 0.5MPa and 500L/min air consumption volume.
Model number
SAC-100
Power supply
Compressed air
Max vacuum pressure
Suction air volume
1. Ø38 Hose (2m) with anti-static
grounding wire
2. Ø38 Straight aluminium tube
3. Ø38 Aluminium crevice nozzle
4. Ø38-25 Saw/bore dust nozzle
5. Dry type filter (Not in pic.)
■ Plastic accessory set also available
9
22.0 kPa
Power consumption
Net weight
static grounding wire
2. Ø38 Aluminum extension tube
Single phase100V
Tank capacity
Net weight
Hose
19.6 kPa
1.93 m³/min
Dust: 16L
Liquids: 14.5L
10.5 kg
Diameter
Length
Dimensions (mm)
38 mm
2m
W338 x D346 x H600
Made in China
SAV-110R-8A •
•
•
•
Wet & Dry | Light and Compact
Perfect for
the Office
Powerful but compact vacuum cleaner suitable for office use.
Very flexible and versatile since it cleans both dry dust as well as liquids.
Both the filter and dust tank can be washed with water, which allows for very easy maintenance.
With the new light weight casing, the unit only weighs 7 kg.
Model number
SAV-110R-8A
Suitable for cleaning:
Dust & liquids
Power supply
①
④
Single phase 220V
Max vacuum pressure
②
23.0 kPa
Suction air volume
2.6 m³/min
Power consumption
③
1100W
Rated current
5.5A
Tank capacity
Dust: 8L / Liquids: 6.5L
Net weight
1.
2.
3.
4.
8.2 kg
Hose
Vacuum Cleaners
220V Model
Diameter: 32 mm / Length: 1.8m
Power cable length
Ø32 Floor nozzle
Ø32 Crevice nozzle
Ø32 PVC Extension tube (2)
Ø32 Hose
Exploded View
8m
Dimensions (mm)
W340 x D360 x H485
Floor Sweepers
Made in China
Space-efficient storage
ST-651 -
1,010mm
•
•
•
•
•
Walk-Behind Mechanical Sweeper
100% mechanical walk-behind sweeper. No external power source needed.
You can sweep over 2 km2 an hour at 3.5km/h walking speed.
The traction wheels drive both the gather-up brush on the side arm and the main brush.
With the semitransparent dust tank you can easily check what you have swept up and see when
the tank is full.
The sweeper can be stored vertically, making it very space-efficient.
Model name
380mm
YUSO Walk-Behind Sweeper
Model number
ST-651
Power source
Driven by being pushing forward
Sweeping width
650 mm
Sweeping capacity (Area)
2.275km²/h at 3.5km/h walking speed
Dust box volume (Effective)
Dimensions (mm)
25L (7L)
W780 × D1270 × H960
Weight
ST-1501DC Dust box
Tire
Direction of
movement
Main brush
Dust and litter
•
•
•
21kg
Forklift-Attached Mechanical Sweeper
100% mechanical. Just mount it onto the forks of a forklift and start sweeping.
Significantly lower initial cost and running cost than other ride-on sweepers on the market.
Sweep 7500m2 in just one hour. Perfect for parking lots and other large open spaces.
Model name
YUSO Forklift Sweeper
Model number
Low initial cost
and
running cost
Power source
Brush and dust collection fan
ST-1501DC
Driven by forward motion of the forklift
Sweeping width
Sweeping capacity (Area)
Dust filter
Dust box volume
Dimensions
Weight
Suitable forklift types
1.500mm
7.500m at a driving speed of 5km/h
2
Dust collecting filter with filter shaker handle
20L
W1500 × D1180 × H690
130kg
Maximum outer fork width: 276mm
(Forklifts in the 0,75-2 ton class)
10
Portable Exhaust Fans
SJF-604A •
•
•
•
3ph 200V Models
Made in Japan / Taiwan
Large Portable Exhaust Fan / Blower | Low Energy | Quiet Design | 65m airflow
Powerful ventilation with and air flow that reaches 65m.
New quiet design. Only emits 70dB sound level.
Very low energy consumption. 23% less than previous model.
The air flow angle can be adjusted 180º.
■ Bell-shaped body
The new bell shaped construction allows for smoother
air flow and reduces noise.
Straight shape
Bell shaped
Made in
Japan
■ Airflow distance: 65 meters!
Model number
SJF-604A
Power supply
3 Phase 200V (Other voltages available on demand)
Fan blade
Motor
Diameter
600 mm
Quantity
4 Blades
Nominal output
1.5 kW
Poles
4 Poles
Power consumption
90º
Rated current
Air flow
Air flow direction can be adjusted 180º
w
Air flow
7.5A
480 m3/m
Max. air volume
Noise level
70 dB
Weight
83 kg
Electric cable
Air
flo
90º
800W
Not included
Dimensions (mm)
SJF-600A SJF-700A -
Made in
Taiwan
•
•
•
W1066 × D755 × H1177
65 m airflow
70 m airflow
Powerful ventilation with airflow reaching 65m and 70m respectively.
Suitable for ventilation of large factory spaces and warehouses.
Airflow direction adjustable 90º up and 90º down.
Model number
SJF-600A-3
Power supply
Fan blade
Motor
SJF-600A
SJF-700A
Diameter
600 mm
710 mm
Quantity
9 Blades
6 Blades
Nominal output
1.5 kW
2.2 kW
Poles
4 Poles
4 Poles
1040W
1750W
Power consumption
Rated current
■ Airflow distance: 65 meters!
■ Airflow distance: 70 meters!
Max. air volume
Noise level
6.5A
11.0A
480 m3/m
740 m3/m
80 dB
lectric cable
87 dB
Not included
Weight
Dimensions (mm)
Work in Comfort
11
SJF-700A-3
3 Phase 200V (Other voltages available on demand)
79 kg
106 kg
W920 × D690 × H1160
W1062 × D820 × H1292
Made in Taiwan
Portable Exhaust Fans
200V Models
Portable Exhaust Fans
effectively remove
►► extreme heat
►► Dust
►► fumes
►► dangerous particles
from your work place
SJF-200RS SJF-250RS SJF-300RS -
Powerful and Durable
For ø 23cm ducts
For ø 28cm ducts
Standard Models
For ø 32cm ducts
SJF-200RS
Model number
SJF-200RS
Power supply
SJF-250RS
SJF-300RS
Single phase 200V (Other voltages available on demand)
Power consumption
175W
265W
415W
Rated current
1.6 A
2.2A
3.3A
Applicable duct diameter
Fan blade
Motor
230mm
280mm
320 mm
ø200mm / 6 blades
ø250mm / 6 blades
ø288mm / 4 blades
250W / 2 poles
350W / 2 poles
550 W / 2 poles
Max. air volume
20 m3/m
35 m3/m
50 m3/m
Noise level
77.5 dB
83.5 dB
80 dB
8.0 kg
9.1 kg
12.8 kg
W300 × D305 × H337
W360 × D307 × H393
W390 × D332 × H432
Weight
Dimensions (mm)
Protective device
SJF-200L SJF-250L SJF-300L -
SJF-300RS
Thermal protector
For ø 28cm Duct
Low Energy-Consumption Models
For ø 32cm Duct
Power supply
Power consumption
SJF-200L
SJF-250L
SJF-300L
Single phase 200V (Other voltages available on demand)
100W
160W
345 W
1.6A
2.2 A
3.3 A
230mm
280mm
320 mm
ø200mm / 4 blades
ø250mm / 4 blades
ø288mm / 4 blades
100W / 2 poles
200W / 2 poles
400W / 2 poles
Max. air volume
17 m3/m
28 m3/m
44 m3/m
Noise level
65.0 dB
68.5 dB
71 dB
8.7 kg
10.5 kg
14.5 kg
W360 × D382 × H380
W390 × D390 × H423
W440 × D405 × H471
Rated current
Applicable duct diameter
Motor
Weight
Dimensions (mm)
Protective device
Quiet and
Energy-Saving
For ø 23cm Duct
Model number
Fan blade
SJF-250RS
Thermal protector
SJF-200L
SJF-250L
SJF-300L
The new bell shaped construction allows for smoother
air flow and reduces noise.
Straight shape
Bell shaped
12
Dust Collectors
3ph 200V models
Made in Japan
Dust Collectors
CS-Series -
Heavy Duty Dust Collectors | Easy-maintenance Cartridge Type Filters
•
These powerful industrial size dust collectors help to keep your work environment free from dangerous dust particles that
otherwise could be inhaled and cause serious respiratory illnesses.
•
With the [+] shaped top you can attach up to four suction ducts facing upwards, hence taking up very little extra floor space.
•
The highly effective cartridge filter is installed as a casette that easily can be taken out for cleaning or to be changed.
•
By pulling the lever on the side of the unit back and forth a couple of times, you easily shake the dust that has accumulated on
Remove
hazardous
particles from
the air
the filter. This should be done regularly to prevent the filter from clogging, which would decrease the performance of the unit.
■ Explore multiple applications in industrial environments
■ SDC-3700CS
■ SDC-2200CS
■ SDC-750CS
■ SDC-1500CS
■ Pull the lever to shake the dust off the filters
Model number
SDC-750CS
SDC-1500CS
Power supply
■ Four possible duct
■ attachment points
■ Easy to access and
■ change casette filter
2
1
0.75 kW / 2P
1.5 kW / 2P
2.2 kW / 2P
Horse powers
1 hp
2 hp
3 hp
5 hp
Average suction air flow
10 m³/min
15 m³/min
30 m³/min
40 m³/min
Static pressure
1.16 kPa
1.45 kPa
2.02 kPa
2.20 kPa
Suction vent diameter
123 mm
148 mm
198 mm
248 mm
4 m2
8 m2
16 m2
20 m2
4 pieces
4 pieces
5 pieces
Casette
filter
Area
Quantity
Net weight
3
2 pieces
25 L
108 kg
13
46 L
180 kg
250 kg
W815 x D786 x H1765
W985 x D917 x H1925
Not included
W686 x D660 x H1389
■ Cyclone Separators - For even more effective dust collection
SDC-220C
3.7 kW / 2P
37 L
117 kg
Electric cable
Dimensions (mm)
SDC-75C
SDC-3700CS
Motor output
Dust tank capacity
4
SDC-2200CS
3 phase 200V (Other voltages available on demand)
•
The dust collector cyclone separators unburden the dust collector unit and
its filters by extracting all the larger dust particles before they reach the
actual dust collector.
•
Larger particles of wood, glass, metal etc bump against the wall of the
cyclone separator where they loose speed and fall down into the dust
tank, leaving only the smallest particles to continue to the dust collector
unit.
•
This two step system require much less filter maintenance and the dust
tank can be changed less often.
Made in Japan
Hot Air Dryers
100V / 200V / 3ph 200V
Hot Air Dryers
F-Series -
Up to 350ºC
Output Heat
Clean Output Air | Digital Control Panel | Space-Efficient Design
•
Suiden hot air dryers are an invaluable tool for drying, heating, defrosting,
antifreeze, temperature regulation, heat sterilization, aging, dissolution and melting.
•
They produce clean hot air free of pollutants, making them suitable for drying food
and other hygienically sensitive products.
•
Easy to use digital control panel.
•
Equipped with dual overheat protection system.
■ Here are just a few examples of the many possible applications:
Drying seafood,
Drying spaghetti,
mushrooms and other
noodles and other
food stuffs
pasta
Drying printings on
Drying circuit boards
lighters and similar
and other electronic
products
components
Removing excess
Drying newspapers
moisture from meat or
and other printed
fish before packaging
material
Model
Power supply
SHD-1.3FII
SHD-2FII
Single phase 100V
Single phase 200V
1.4 kW
2.1 kW
Power consumption
SHD-4FII
SHD-6FII
4.1 kW
6.1 kW
SHD-9FII
SHD-15FII
3 phase 200V
Temperature control system
9.1 kW
15.4 kW
PID Controller
Temperature range (including hot
air recirculation setting)
Ambient temperature ~ 350℃
Max. output temperature
200℃
300℃
1.7 m3 / min
Max. air volume
Air flow adjustment method
350℃
3.7 m3 / min
5.0 m3 / min
Damper in the fan unit air vent
Hot air exhaust vent: φ50 mm
Air intake vent:
φ75 mm
Applicable duct size
Hot air exhaust vent: φ75 mm
Air intake vent:
φ100 mm
Air intake vent max. temperature
Hot air exhaust vent: φ100 mm
Air intake vent:
φ100 mm
200℃
External dimensions
Weight
W524 x D344 x H469
W578 x D359 x H522
W612xD364xH522
W967xD478xH542
26 kg
33 kg
35 kg
60 kg
Electric cable
Not included
Made in Japan
100V / 200V / 3ph 200V
Ventilation Fans
Roof Ventilation Fans
Pressure Ventilation Wall Fans
•
The ultra-light corrosion resistant FRP
dome effectively protects against wind
and rain.
•
Perfect for ventilating stale air, gases,
moisture and heat.
•
Low noise design with bell mouth
shape that reduces vibrations.
•
Low noise design with rounded edges
that reduce vibrations.
•
Available in many different sizes:
40 - 90 cm fan blade diameter.
•
Available in many different sizes:
25 - 90 cm fan blade diameter.
•
Natural ventilation models without
fans are also available.
•
Both 1-speed and 3-speed models are
available.
•
Optimal effect is achieved when
used in combination with pressure
ventilation wall fans (see right).
•
Stainless steel models also available.
•
Optimal effect is achieved when used
in combination with roof ventilation
fans (see left).
■ Top view
without
dome
10.0 m3 / min
■ Bottom
view
The following
■ Ventilation Hood
■ Fan Guard
■ Shutters
optional accessories
are also available:
14
Website: www.suiden.com
E-mail: info@suiden.com
Tel:
+81 (0) 6-6772-0850
Fax:
+81 (0) 6-6772-9898
Catalog number : General catalog - 1403 - ***
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising