Euro hinge attachment and adjustment
Euro hinge attachment and adjustment
Door installation
CLIP top BLUMOTION deactivation
To install, place the hinge
on the mounting plate
and push the back
of the hinge arm down
with finger pressure.
The “click” sound
confirms a secure
attachment.
For small or light doors, the BLUMOTION can
be deactivated on one of the hinges. Door must
be closed once for the deactivation to be
complete. To reactivate, move switch back to
the original position.
Door removal
Release the lever under the
hinge arm to remove.
Side adjustment
Rotate the front screw to increase or decrease the door
overlay (+/- 2 mm).
Depth adjustment
Rotate the rear spiral tech cam screw to adjust the door
position (+ 3/- 2 mm).
For CLIP hinges, loosen the rear
screws on all hinges, adjust and retighten.
800-438-6788
www.blum.com
Technical specifications subject to change without notice.
LIT.HNG6200.10.10 © 2010 Printed in USA
CLIP mounting plate adjustments
Height adjustment
Cam wing mounting plate
Rotate cam screw on
the mounting plate to
adjust door position
(+/- 2 mm).
One-piece wing plate
Loosen screws on the
mounting plate. Adjust
door to position and
tighten screws
(+/- 3 mm).
Cam in-line mounting plate
Rotate cam screw on
the mounting plate to
adjust door position
(+/- 2 mm).
Face frame cam adapter plate
Rotate cam screw on
the mounting plate to
adjust door position
(+/- 2 mm).
Face frame adapter plate
Loosen screws on the
mounting plate. Adjust
door to position and
tighten screws
(+/- 2 mm).
Technical specifications subject to change without notice.
LIT.HNG6200.10.10 © 2010 Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising