LS 180 English for translation
2.4GHz DIGITAL WIRELESS SOUNDBAR SYSTEM
LS 180
LS 180
SAFETY INFORMATION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,
WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED
TO ALERT THE USER TO THE PRESENCE OF
UNINSULATED, "DANGEROUS VOLTAGE", WITH IN THE
PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL
TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
Safety Precautions
!
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK. DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CE Declaration of conformity
0179
Model number: LS 160
Trade name: Blaupunkt Competence Center Audio M3 Electronic GmbH
Responsible Party: M3 Electronic GmbH
Gutenbergstrasse 5,
D-65830 Kriftel,
Germany
Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares
that this Class 1 equipment is in compliance with the essential requirement and
other relevant provisions of Directive 1999/5/EC. The declaration of confiormity
may be consulted at www.blaupunkt.com
Warning: This product can be used in all countries of the European Union and EFTA countries.
Letter of Conformity can be obtained from info@m3-electronic.de
1
LS 180
IMPORTANT SAFEGUARDS
Caution: Please read carefully all the following important safeguards to ensure safe operation.
1. Read Instructions - All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be
retained for future reference.
3. Follow Instructions - All operating instructions should be followed.
4. Heed Warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
5. Power Source - The appliance should be connected to a power supply
only of the type specified in the operating instructions or as marked on
the appliance.
6. Power-cord Protection - Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
7. Water and Moisture - The appliance should not be used near water
(for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool, etc.)
8.Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. Do not use the
appliance on a bed, sofa, rug or similar surface that may block the
ventilation openings.
2
LS 180
9. Heat - Keep the appliance away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
10. Nonuse Periods - The power cord of the appliance should be unplugged
from the outlet when left unused for a long period of time.
11. Damage requiring service - The appliance should be serviced by qualified
service personnel when:
a/ The power-supply cord or the plug has been damaged; or
b/ Objects have fallen or liquid has been spilled into the appliance; or
c/ The appliance has been exposed to rain; or
d/ The appliance does not appear to operate normally or exhibits a marked
change in performance; or
e/ The appliance has been dropped, or the enclosure damaged.
12. Servicing - The user should not attempt to service the appliance beyond
that specified in the operating instructions. All other servicing should be
referred to qualified service personnel.
13. Clean only with dry cloth.
14. Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult and electrician for replacement of the
obsolete outlet.
15. Unplug this apparatus during lightning storms or when unused for
long periods of time.
3
LS 180
FRONT PANEL
1
2
3
5
1.STANDBY: Power Standby Button.
2.INPUT:Input Selection Button.
3.VOL-: Volume Downward Adjustment Button.
4.VOL+: Volume Upward Adjustment Button.
5. STANDBY:Subwoofer Standby Input Indicator.
4
4
LS 180
REAR PANEL
1
2
3
5
4
7
8
5
6
LS 180
1. AUX Stereo Right Audio Input.
2. AUX Stereo Left Audio Input.
3. TV Stereo Right Audio Input.
4. TV Stereo Left Audio Input.
5. Power On/Off Switch.(SOUNDBAR )
6. AC Power Cord.(SOUNDBAR )
7. Power On/Off Switch.(SUBWOOFER)
8. AC Power Cord.(SUBWOOFER)
REMOTE CONTROL
7
8
1
2
3
9
10
4
11
5
12
6
13
6
LS 180
1.STANDBY: Power Standby.
2.MUSIC: Music Mode Selection.
3.NORMAL: Normal Mode Selection.
4.VOL-: Volume Downward Adjustment Button.
5.BASS-: Bass Downward Adjustment Button.
6.TREBLE-: Treble Downward Adjustment Button.
7.INPUT: Input Selection Button .
8.MUTE: Mute Function Button .
9.RESET: Location Retrieval Button .
10.MOVIE: Movie Mode Selection.
11.VOL+: Volume Upward Adjustment Button.
12.BASS-: Bass Upward Adjustment Button.
13.TREBLE-: Treble Upward Adjustment Button.
REMOTE CONTROL BATTERY REPLACEMENT
1.Replace the remote control battery when it no longer operates the
unit, or the range is reduced considerably.
2.Use only Cr2025 3V lithium batteries
3.Bear in mind that lighting & other room conditions, in addition to
battery age, can affect the operating range of an infrared remote control.
7
LS 180
SYSTEM CONNECTION
Video In
TV
To Stereo Output
RCA Cable
Woofer
Rear-L
Front-L
Center
Rear-R
Front-R
Video Out
Video
Audio Out
Audio Out
Video Out
Scart out
Woofer
Rear-L
Front-L
Center
Rear-R
Front-R
Manufactured under license from Dolby Laboratories.
"Doldy","Dolby Digital", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works.
@1992-1997 Dolby Laboratories, Inc.
All rights reserved.
Optical
Coaxial
Video
S-Video
U
8
Y
V
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
Apparatus Claims of U.S. Patent Nos.
4,631,603;4,577,216;4,819,098 and 4,907,093
licensed for limited viewing uses only.
AC 100V~240V
50/60Hz
DVD Player
LS 180
OPERATION
A. Switch On/Off the Product
1. Before turning on the system, please connect it according to
the System Connection Instruction.
2. Connect AC power supply with this product.
(Caution: Power source must be consistent with this product.)
3. Press on the POWER switch button on the Rear Panel of the main
unit to switch on the system, the standby indicator will light up.
Then press the STANDBY button on the remote controller to enter
The normal status. Press the button on the remote controller once
again to keep power in standby status.
B. VOLUME Selection
1. Press the VOL+ button on the front panel of the main unit
or VOL + button on the remote controller to maximize the
sound output.
2. Press the VOL- button on the front panel of the main unit
or VOL - button on the remote controller to minimize the
sound output.
C. MUTE Selection
1. Press the MUTE button on the remote controller once to
keep the performance silent.
D. RESET
Press the RESET button on the remote controller and it will reset
all settings including SW Speaker output, Surround Speaker output
to factory default settings.
9
LS 180
SPECIFICATIONS
1.Power Supply...........................................................................AC 230V/50Hz
2.Total Power Consumption........................................................................80W
3.Input Sensitivity (Subwoofer)..................................................200mV 20mV
4.Input Sensitivity (Satellite)......................................................550mV 50mV
5.Speaker Impedance (Subwoofer).........................................................8 Ohm
6.Speaker Impedance (Satellite)..............................................................8 Ohm
7.S/N (A Weight)........................................................................................80dB
8.Subwoofer Power Output (MAX)............................................................40W
9.Satellite Power Output (MAX).............................................................2x20W
10.THD (1kHz, 1W)....................................................................................0.5%
11.Frequency Response..................................................... 45Hz~20KHz 5dB
12.L/R Separation (1kHz)...........................................................................30dB
13.L/R Balance (Stereo)............................................................................. 2dB
Note: Specifications are subject to change for improvements.
10
LS 180
c 2010 ALL rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH. This
material may be reproduced, copied or distributed for personal use only.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising