High Performance Crate Engines from Mopar

High Performance Crate Engines from Mopar
High Performance Crate Engines from Mopar Performance!
Choose your Level of Performance with Small Block, Big Block and Hemi Engines from Mopar!
Mopar Performance Crate Engines
Your classic muscle
car commands
horsepower and
performance, and
Mopar Performance
crate engines deliver.
Crate engine assemblies not used in
competition are warranted for “parts
only,” AS DELIVERED against defects
in materials or workmanship for 90
days from the date of purchase. The
following parts, if defective, will be
replaced on an exchange basis for 90
days: engine blocks and all internal
parts; cylinder head assemblies; intake
manifold; core plugs; valve covers; oil
pan; timing gear; water pump; gaskets
and seals. See your dealer for a copy
of the limited warranty, which contains
additional terms and limitations.
Important: These engines are for off-highway use only and
may not be legal for use in pollution-controlled vehicles.
Horsepower and torque ratings based on test engine.
Ratings may vary on individual engines.
360 Magnum - 405 HP
500 Wedge - 505 HP
This high output Magnum 360 crate engine produces
405 horsepower at 5,900 rpm with 400 ft.-lbs. at
4,600 rpm.
Features
HP Magnum block
Magnum Aluminum Cylinder Heads
Mopar Performance electronic ignition
Single Plane M1 4-bbl aluminum intake manifold
(taller than stock- check clearance)
Center sump oil pan (Commando style)
Specifications
Displacement: 360 cubic inch
Bore x Stroke: 4.040" x 3.310"
Camshaft: Hydraulic Roller, 288°/292°
Valves: Stainless steel, 2.02" intake, 1.60" exhaust
Compression: 10:1
This Wedge crate engine packs 505 horsepower and
590 ft.-lbs. of torque into 500 cubic inches, more power
than any production Wedge motor.
Features
Heavy Duty Cast-Iron Block with Cross-bolted mains
Cast Iron Cylinder Heads
Flat Top Cast Aluminum Pistons
Forged Crankshaft
Premium Double Roller Timing Chain
Chrome Front Cover
Single-Plane M1 Aluminum Intake Manifold
Cast Aluminum Valve Covers
Specifications
Displacement: 500 cubic inch
Bore x Stroke: 4.380" x 4.150"
Camshaft: Hydraulic, 292°, 0.509"/0.509"
Valves: Stainless, 2.14" Intake, 1.81" Exhaust
Compression: 9.0:1
Important: Optimized for 750 CFM carburetor and
symmetrical, neutrally balanced torque converter or
flywheel (sold separately). Does not include accessory
brackets. Not designed for use with Air Conditioning or
factory MPI.
Note: Shipped truck freight.
No further discounts apply.
Note: Shipped truck freight.
No further discounts apply.
MN1979 ............................................ 10,865.99 ea
MN1971 ............................................ 10,940.99 ea
440 Super Commando - 530 HP
K
Engines & Components
410 Six Pack - 470 HP
This crate engine uses proven components to deliver
a solid 330 horsepower and 330 ft-lbs. torque in a
package that fits in most muscle cars.
Features
340 block with 4-bolt mains
Aluminum "LA" cylinder heads
Heavy duty cast crankshaft
Specifications
Displacement: 340 cubic inch
Bore x Stroke: 4.040" x 3.310"
Camshaft: Hydraulic, 292°/292° duration, 0.508" lift
Oil Pan: Stock style front sump
Compression: 10:1
Mopar's 410 Stroker small-block features a new
aluminum “Six Pack” intake manifold and Mopar cast
aluminum valve covers. With 470 Horsepower and 490
ft.-lbs. of torque, this crate engine will impress at the
drag strip and on cruise nights.
Features
340 block with 4-bolt mains
Aluminum LA Cylinder Heads
High-lift Hydraulic Camshaft
Heavy-Duty Forged Stroker Crankshaft
Eight Quart Center Sump Oil Pan
Specifications
Displacement: 410 cubic inch
Bore x Stroke: 4.040" x 4.000"
Camshaft Duration: 292°/292°
Valve Size: 2.02" Intake, 1.60" Exhaust
Compression: 10:1
Important: Carburetor not
included.
Note: Shipped truck freight.
No further discounts apply.
Important: Carburetor not
included.
Note: Shipped truck freight.
No further discounts apply.
MN1970 ............................................ 12,710.99 ea
MN1975 ............................................ 13,548.99 ea
340 Six-Pack - 330 HP
394
High Performance Crate Engines
How does big block power from a small block package
sound? That’s 530 horsepower and 540 ft-lbs., using
pump gas, to be specific. This 440 Super Commando
is a crate motor to be reckoned with.
Features
340 Siamese Block with 4-bolt mains
Aluminum Cylinder Heads
Single Plane 4 bbl Intake Manifold
Forged Crankshaft and Pistons
Specifications
Displacement: 440 cubic inch
Bore x Stroke: 4.185" x 4.000"
Camshaft: Hydraulic 251°/257° @ .050", 603" Lift
Valves: 2.080"/1.600" Stainless , with 5/16" Stems
Compression: 10.0:1
Oil Pan: Eight-quart Center Sump Street/Strip
Connecting Rods: Forged 6.123"
Rocker Arms: Aluminum Roller with 1.6:1 Ratio
Important: Carburetor and
air cleaner not included.
Note: Shipped truck freight.
No further discounts apply.
MN1977 ............................................ 14,560.99 ea
Toll Free Order Line 800.854.1280
High Performance Crate Engines from Mopar Performance!
Choose your Level of Performance with Small Block, Big Block and Hemi Engines from Mopar!
Four Levels of Hemi Performance! Choose From a Streetable
465 HP or Blast Down the Track with 640 Tire-Melting Horsepower!
MN1974
6.1L (370) Hemi - 425 HP
MN1978
426 Hemi - 465 HP
Enjoy 465 horsepower and 465 ft.-lbs. of torque with this
classic 426 Hemi, plenty of classic power to move you!
Features
Cast Iron Block with Cross-bolted mains
Cast Iron Cylinder Heads
Forged Crankshaft and Pistons
Premium Double Roller Timing Chain and Sprockets
Performance Electronic Distributor
Six quart Center Sump Oil Pump 1970-71 B-body/EBody Style
Dual Plane 4bbl Aluminum Intake Manifold
Chrome Valve Covers
Specifications
Displacement: 426 cubic inch
Bore x Stroke: 4.250" x 3.750"
Camshaft Lift: 0.499"/0.483"
Camshaft Duration: 234° at .050"
Valves: Stainless, 2.25" Intake, 1.94" Exhaust
Compression: 8.7:1
Important: This engine is optimized for a 4-barrel 750
CFM carburetor and 2"
exhaust headers.
Note: Shipped truck freight.
No further discounts apply.
MN1976 ............................................ 15,995.99 ea
472 Hemi Crate Engine - 530 HP
528 Hemi - 610 HP
610 horsepower and 650 ft-lbs. of torque from a 528
cubic inch Hemi.
Features
Cast Iron Block
Aluminum Cylinder Heads
Forged Crankshaft and Pistons
Premium Double Roller Timing Chain
Dual Plane M1 Aluminum Intake Manifold
Cast Aluminum Valve Covers
Specifications
Displacement: 528 cubic inch
Camshaft: Hydraulic, 292°, 0.524"/0.543"
Valves: Stainless, 2.25" Intake, 1.94" Exhaust
Compression: 10.25:1
Important: Engine comes with a four barrel manifold
installed. Cross ram intake system and carburetor not
included.
Note: Shipped truck freight.
No further discounts apply.
MN1980 ............................................ 18,000.99 ea
528 Hemi Crate Engine - 640 HP
All other factors held equal, there's no replacement for
displacement. That's why this huge 528 Hemi Crate
Engine was developed to crank out a whopping 640
horsepower and 612 ft.- lbs. of torque! For the pinnacle
of Mopar crate engine performance, look no further.
Features
Black Cast Aluminum Valve Covers
Aluminum Cylinder Heads
Heavy-Duty Single Valve Springs
Premium Material Valve Stem Seals
Aluminum Single Plane Four-barrel Intake Manifold
Forged Steel Crankshaft and Pistions
High-Performance Electronic Distributor
Precision Double Roller Timing Chain and Sprockets
Chrome Front Cover
Specifications
Displacement: 528 cubic inch
Bore x Stroke: 4.500" x 4.150"
Block: Siamese Bore, Cast Iron with Cross-Bolted
Mains
Camshaft: Hydraulic 251°/257° @ .050", 603" Lift
Valves: Stainless Steel 2.25" Intake 1.94" Exhaust
Compression: 10.0:1
Oil Pan: Six-quart Center Sump Street/Strip
Connecting Rods: Forged 6.123"
Important: This engine is optimized for an 850 CFM
vacuum secondary carburetor
and 2" exhaust headers.
Note: Shipped truck freight.
No further discounts apply.
Important: This engine is optimized for an 850 or 900
CFM carburetor and 2-1/4" exhaust headers.
Note: Verify hood clearance
for intake manifold. Shipped
truck freight. No further
discounts apply.
MN1978 ............................................ 17,199.99 ea
MN1981 ............................................ 18,965.99 ea
Horsepower and torque right out of the crate! The
370 Hemi is available in two forms, one (MN2070)
with factory wire harness and throttle body, the other
(MN1972) with billet fuel rails and integral pressure
gauge, cable operated 80 mm throttle body, and
programmable EMS kit.
Features
6.1 Liter (370 cubic inches)
425 horsepower, 420 ft. lbs of torque
Electronic Fuel Injection.
Dyno tested, ready to run
Note: Shipped truck freight.
No further discounts apply.
MN1972 w/upgraded FI & EMS kit .. 10,627.99 ea
MN2070 with basic FI........................ 6250.99 ea
392 Hemi Crate Engine - 540 HP
Precision balanced rotating assembly, distributorless
Coil-On-Plug (COP) ignition, this 392 Hemi is modern
muscle for any Mopar, and is available with electronic
fuel injection (EFI) or carbureted. With EFI, this Hemi
is good for 525 HP and 510 lb-ft of torque (MN1974).
With a Holley 870 cfm carburetor, you can expect
540 hp and 490 ft-lb of torque (MN1973). Both come
with a pre-programmed engine controller to ensure
compatibility with virtually any vehicle.
Features
Deep-skirted cast iron block with cross-bolted mains
4140 forged steel crankshaft
Hydraulic roller camshaft
Premium tri-metal engine bearings
SFI-approved competition crankshaft damper
4130 forged steel I-beam 6.200" connecting rods
CNC-ported aluminum twin-plug cylinder heads
Aluminum single plane high-rise intake manifold
"Plug and play" wiring harness
Specifications
Displacement: 392 cubic inch
Bore x Stroke: 4.055" x 3.795"
Camshaft Duration: 279°/285° (@ .006")
Camshaft Lift: 0.584" Intake, 0.552" Exhaust
Valves: Stainless 2.100" Intake, 1.600" Exhaust
Compression: 10.5:1
Engine Management Features
• Windows software
• Built-In Peak and Hold Injector Drivers
• Built-In Direct Drive Ignition
• Built-In Dual Wideband UEGO Controllers
(UEGO sensors not required or included)
• Sequential Fuel Injection
• Soft Cut Rev Limiters
• Onboard 512 kb Datalogger
• Definable Knock Control
• Full Idle Control
• Compatible with Factory Sensors
Note: Shipped truck freight.
No further discounts apply.
MN1973 with EFI.............................. 19,065.99 ea
MN1974 with carburetor ................... 18,655.99 ea
High Performance Crate Engines
395
Engines & Components K
This 472 Hemi, with an even 530 horsepower and
530 ft.-lbs. torque, is an impressive step up from the
familiar 426 Hemi. Plenty of power for any Mopar.
Features
Cast Iron Block with Cross-bolted mains
Cast Iron Cylinder Heads
Chrome Valve Covers
Aluminum Dual-Plane M1 Four-barrel Intake Manifold
Heavy-Duty Single Valve Springs with Dampers
Premium Valve Stem Seals
Forged Steel Crankshaft
Premium Double Roller Timing Chain and Sprockets
High-Performance Electronic Distributor
Specifications
Bore x Stroke: 4.250" x 4.150
Camshaft: 301° Hydraulic, 248° duration @ .050" 0.582"/0.563" Lift
Valves: Stainless Steel, 2.25" Intake,1.94" Exhaust
Oil Pan: 6-Quart Center Sump (70-71 B & E-Body
Style)
Compression: 9.0:1
MN1981
ATK Remanufactured Engines
Introducing
ATK’s No Fault Gold Warranty Program.
An added protection program that covers car rental, towing, an increased labor
rate and fluids on all approved claims.
There are over 150 processes involved in remanufacturing an ATK
engine. Featured procedures include:
Engine blocks magnafluxed, bored, precision-honed and mains line-honed.
Camshaft bearings line-bored for accurate center-to-center clearance.
Engine blocks and cylinder heads precision surfaced.
Cylinder heads magnafluxed and machined for three-angle valve seats.
Crankshafts stress-relieved, precision ground and micro-polished.
Camshafts precision ground or replaced with new.
Each engine tested (most hot-run tested) for compression, oil pressure, oil
leaks, engine noise and general operating condition before shipment.
ATK Remanufactured Engine Warranty Information:
K
Engines & Components
At Classic Industries®, we know that supplying a great product is only part
of the job. The staff at ATK is a group of dedicated professionals whose
only job is to support you, the Classic Industries® customer. From the
moment you call ATK, whether to request technical assistance or inquire
about their warranty, they are dedicated to providing solutions and
support. That’s the ATK promise. Classic Industries® and ATK have
always been leaders in innovation, offering products, warranties and
programs that have redefined the industry. That leadership is evident in
our products and our support. ATK warranties to the original purchaser
that each engine sold by Classic Industries® shall be free of defects in
material and workmanship under normal use and with periodical maintenance
as set forth by the original manufacturer subject to the following terms and conditions.
Product Replaced Under Warranty:
Product replaced under warranty carries the remainder of the original product’s warranty term.
Standards:
Subject to the limitations listed herein. ATK, at its option, shall repair or replace a product within the warranty term after
determination by ATK that the product is defective. All products are to be returned to ATK for inspection. Products not returned
to ATK will not be warranted. All repairs and/or replacements covered by this warranty must be authorized by ATK. Unauthorized
repairs will not be paid.
Limitations:
This warranty applies to products originally supplied by ATK. This warranty does not apply to or include any of the following:
A. Damage as a result of OVERHEATING, LACK OF LUBRICATION, Fuel Wash or Contamination .
B. Damage resulting from PRE-IGNITION or DETONATION. This includes but is not limited to: melted or broken pistons,
broken piston rings, damaged cylinder heads, leaking head gaskets, etc. For more information regarding pre-ignition and detonation
please contact our Customer Service Department.
C. Repair or replacement required as a result of any accident or misuse.
D. Repair or replacement of any accessory or service item, including specifically but not limited to: all components of the cooling,
fuel, electrical and ignition systems in addition to all belts, hoses and filters.
E. Any product used for competition racing or related purposes.
F. Any product to which a device or accessory not conforming to original manufacturer’s specifications has been installed.
G. Any product on which periodic maintenance services required by the original manufacturer have not been performed.
Limited Liability:
ATK’s liability under this warranty is limited solely to the repair or replacement of defective product. ATK shall not be liable
for any incidental, special, consequential or exemplary damages, including but not limited to rental cars, towing fees or for any
service not expressly provided for herein, relating to or arising from the ATK product.
Limited Warranty:
This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, or fitness
for a particular purpose, on the part of ATK or the dealer installing the engine. No dealer nor any agent or employee thereof, is
authorized to extend or modify this warranty.
Labor Payments:
ATK authorized repairs will be compensated at a rate not to exceed 100% of the applicable flat rate schedule as published by
Chilton, Mitchell or Motors Repair Manuals. Hourly rates for all authorized labor claims will be paid in accordance with the
original installation rate, not to exceed $50.00 per flat rate hour. Do-it yourself repairs and repairs performed by unlicensed repair
facilities will not be reimbursed.
Additional Owner/User Obligations:
Initial Startup: Valves must be readjusted to manufacturer’s specifications. Due to various component designs, cylinder head re-torque
may or may not be required in your particular application. Refer to factory shop manual for the proper procedure for your engine type.
If for any reason you are unsure what action to take please contact our Customer Service Department via our Toll Free telephone
number. First Service Between 600 Miles After Installation: Oil and oil filter must be changed, valves readjusted and cylinder
heads re-torqued (refer to initial startup instructions). Failure to perform these basic operations may result in a voided warranty.
Part # Years C.I.D./L
DE02
DE12*
DE09*
DE03*
DE04*
DE04*
DE11*
DE11*
DE06*
DE07*
DE06*
NFWG
67-74
75-80
75-80
67-74
75-84
75-84
75-84
75-84
71-74
75-89
75-89
All
V.I.N Code
The No Fault Gold Warranty Program Includes:
Rental Car up to $150!
Rental car expense reimbursed for 5 days/ $30 per day up to $150
Towing Up to $100!
Towing reimbursed on approved claims up to $100 per occurrence.
Increased Labor Rate Up to $95 per hour
Increase labor rates to cover approved repairs up to $95 per hour
Fluids Up to $25!
Cost of fluids is reimbursed on approved claims up to $25
ATK now offers the No Fault Gold Warranty Program for you to purchase in
addition to the Industry Leading standard ATK warranty already included with our
remanufactured engines. This added protection policy covers expenses not included
in ATK’s standard warranty. Coverage is based on hourly rates established by
Chilton, Motor and Mitchell manuals.
ATK Gold Seal Service Agreement is an additional $200.00
Rental Towing Max. Hourly Labor Rate
NO Fault
Gold Warranty Program
YES
YES
Up to $95
Standard ATK Warranty NO
NO
Up to $50
How
does the core charge work?
Upon ordering, you will be charged the retail price of the engine plus the core charge.
When your engine arrives, you will save the crating that it is shipped in, so that you
can use it to package your core. Once the core is ready to ship, you will call ATK
for core pickup. ATK will then inspect the core to make sure it meets the following
criteria. Providing the core meets all of the criteria, you will be refunded the core price.
Core Policy:
All fluids must be drained prior to core return.
Cores must be complete and in rebuildable condition.
Core returned must be identical to the engine purchased in size and application.
ATK reserves the right to refuse any core that has been modified or altered.
Note: Core prices can fluctuate according to supply, demand and availability. If you plan to
return a core for credit, please confirm the core price with your salesperson prior to ordering.
No further discounts apply.
Important: All engines come
without valve covers, timing
cover and oil pan unless
otherwise noted. Shipped
anywhere in the Continental
United States for $50.00.
Note: No further discounts
apply.
Description
225/3.7 6 C
Non-smog, 2.157" crank hub, if 1967, check hub
225/3.7 6 C,D,B
Smog, cast crank
225/3.7 6 C,D,B
Non-smog, mechanical lifters
318/5.2 8 E,G
Non-smog, car or truck to 3/4 ton, 14mm spark plugs
318/5.2 8 E,G,H,J,K, Smog
318/5.2 8 M,P,R,T,U
Smog
318/5.2 8 E,G,H,J,K, Non-smog
318/5.2 8 M,P,R,T,U
Non-smog
360/5.9 8 F,J,K,L
Non-smog
360/5.9 8 F,J,K,L,U,V,W Smog, non-roller cam
360/5.9 8 F,J,K,L,U,V,W Non-smog, non-roller cam
No Fault Gold Warranty Program added protection program additional to the ATK 3 Year/Unlimited Mileage Standard Warranty
+ Core
Price
250
260
260
285
285
285
285
285
310
310
310
2074.99 ea
1749.99 ea
2074.99 ea
1839.99 ea
1839.99 ea
1839.99 ea
1839.99 ea
1839.99 ea
1914.99 ea
1914.99 ea
1914.99 ea
225.00 ea
Note: *All engines listed with an asterisk(*) are subjected to the POWERTEST standards of ATK hot-run engine specifications, including compression, oil pressure, temperature, power, leaks, engine noise and
general operating conditions before shipment.
396
Remanufactured Engines
Toll Free Order Line 800.854.1280
High Performance Mopar Crate Engines from ATK
ATK has been building engines for over 75 years and has assembled a
line of crate engine packages to power up your Mopar. Classic Industries’
dedication to bringing the highest quality products on the market,
combined with ATK’s industry-leading warranty make these Mopar ATK
crate engines an obvious choice. Available as a base engine for enthusiasts
with their own fuel, ignition, and top end components, a mid-dress version
that needs only a fuel system, plugs, and wires, or as a complete, readyto-run package for those who want to bolt their engine into their Mopar
and hit the road. For the ultimate in Mopar crate engines, there's no better
source than ATK from Classic Industries®.
MN2428
MN2425
440 Mopar Engine 520 HP
408 Mopar Stroker Engine 430 HP
Responding to popular demand, ATK Performance
has gathered a great combination of Edelbrock parts
to make a solid 520HP/560TQ engine package to
power up your ride.
This 408 stroker engine package comes with everything
needed to power up your ride, including an assortment
of Edelbrock parts, and 430HP/501TQ.
Important: Not eligible for the No Fault Gold Warranty
Program. Not intended for marine use. Marine use voids
all warranties.
Note: Product may vary from image shown. No further
discounts apply.
Important: Not eligible for the No Fault Gold Warranty
Program. Not intended for marine use. Marine use voids
all warranties.
Note: Product may vary from image shown. No further
discounts apply.
Features
Seasoned OE "A" Block
Scat Nodular Iron crankshaft
Hydraulic Flat Tappet camshaft
10.1 Forged Pistons
Moly rings
Scat I Beam rods with ARP rod bolts
Edelbrock Performer RPM intake
Edelbrock Aluminum 63cc Cylinder heads
Quick fuel 780cfm Carburetor
MSD Pro Billet RTR Distributor
Holley 110GPH Fuel Pump
MSD 8mm Spark Plug Wires
8" Neutral Balance Harmonic Balancer
Stainless Steel 1.6 Rocker arms
Specifications
Displacement: 408 cubic inch
Bore x Stroke: 4.030" x 4.040"
Camshaft Duration: 230°/236° @ 50.
Camshaft Lift: 0.488" Intake, 0.491" Exhaust
Compression: 10:1
Base Engine
Stage 1 engines include the oil pan, valve covers and
timing cover. This is the engine to order if you already
have fuel/ignition components and performance top
end components to use.
MN2427 ............................................. 6534.99 ea
Mid Dress Engine
Stage 2 engines take the base engine package and
add a performance intake manifold, distributor, water
pump, balancer and flex plate. Install a performance
fuel system, plugs and wires to get going.
MN2430 ............................................. 5149.99 ea
Mid Dress Engine
Stage 2 engines take the base engine package and
add a performance intake manifold, distributor, water
pump, balancer and flex plate. Install a performance
fuel system, plugs and wires to get going.
MN2426 ............................................. 7524.99 ea
Complete Engine
Stage 3 engines are dyno tested, tuned, and ready
to run. This engine includes everything in the Mid
Dress package and adds a fuel pump and performance
carburetor for a complete package.
MN2429 ............................................. 5844.99 ea
Complete Engine
Stage 3 engines are dyno tested, tuned, and ready
to run. This engine includes everything in the Mid
Dress package and adds a fuel pump and performance
carburetor for a complete package.
MN2425 ............................................. 8414.99 ea
MN2428 ............................................. 7229.99 ea
Important: Not eligible for the No Fault Gold Warranty
Program. Not intended for marine use. Marine use voids
all warranties.
Note: No further discounts apply.
Features
93-01 Magnum OE Block 2 bolt Main 1 pc
OE Cast Steel crankshaft
Hydraulic Roller camshaft
9.1 Hypereutectic Dished Pistons
Moly rings
OE rods
Edelbrock RPM Air Gap Dual plane intake
OE Magnum 65cc Cylinder heads
Quick fuel 680cfm Carburetor
MSD Pro Billet Distributor
Must run an electric Fuel Pump
MSD 8mm Spark Plug Wires
8" External Balance Harmonic Balancer
Specifications
Displacement: 360 cubic inch
Bore x Stroke: 4.040" x 3.850"
Compression: 10.1:1
Complete Engine
This engine is turn-key, ready to run package. Includes
Oil Pan, Valve Covers, Timing Cover, Performance
Intake, Distributor, Water pump, Performance
Carburetor, Balancer, Flex Plate, 8mm Wires and
Spark Plugs.
MN2472 ............................................. 4654.99 ea
ATK High Performance Crate Engines
397
Engines & Components K
Features
Seasoned OE 440 Block
Nodular Iron crankshaft
Hydraulic Flat Tappet camshaft
10.1 Forged Pistons
Moly rings
Scat I Beam rods with ARP rod bolts
Edelbrock Performer RPM intake
Edelbrock Aluminum 84cc Cylinder heads
Quick fuel 780cfm Carburetor
MSD Pro Billet RTR Distributor
Holley 110GPH Fuel Pump
MSD 8mm Spark Plug Wires
8" Neutral Balance Harmonic Balancer
Specifications
Displacement: 440 cubic inch
Bore x Stroke: 4.320" x 3.750"
Camshaft Duration: 238°/246° @ 50.
Camshaft Lift: 0.480" Intake, 0.495" Exhaust
Compression: 10:1
Base Engine
Stage 1 engines include the oil pan, valve covers and
timing cover. This is the engine to order if you already
have fuel/ignition components and performance top
end components to use.
360 Mopar Engine 290 HP
Looking to upgrade that worn out LA 360 engine?
This retrofitted Magnum 360 engine produces 35+
more horsepower over the LA 360 engine, benefitting
from Hydraulic Roller Camshaft/Lifters. This dyno
tested and tuned engine is perfect for street cruisers.
Motor Mounts
MA4695
MD2441
MM2303
1962-76 Motor Mounts
Engines & Components
Original-style motor mounts for various 1962-76
Mopar models. These rubber-insulated motor mounts
are ideal for stock or lightly modified applications.
6 Cylinder Motor Mounts
A-Body
MM2304 1962-66 170/225, RH ............ 16.99 ea
MM2303 1962-66 170/225, LH ............ 16.99 ea
MM2264 1967-72 170/225, RH ............ 11.99 ea
MM2265 1967-72 170/225, LH ............ 14.99 ea
MM2264 1970-72 198, RH ................... 11.99 ea
MM2265 1970-72 198, LH ................... 14.99 ea
MM2323 1973-74 198/225, RH ............ 19.99 ea
MM2324 1973-74 198/225, LH ............ 19.99 ea
MM2376 1973-74 198/225, insert ......... 11.99 ea
8 Cylinder Motor Mounts
A-Body
MM2266 1967-69 273, RH or LH......... 11.99 ea
MM2266 1967-72 318, RH or LH......... 11.99 ea
MM2266 1968-73 340, RH or LH......... 11.99 ea
MM2325 1973-76 318, RH ................... 18.99 ea
MM2326 1973-76 318, LH ................... 18.99 ea
MM2325 1974-76 360, RH ................... 18.99 ea
MM2326 1974-76 360, LH ................... 18.99 ea
MM2369 1973-76 318/360, insert ......... 11.99 ea
B-Body
MM2228 1963-66 361, RH ................... 11.99 ea
MM2227 1963-66 361, LH ................... 11.99 ea
MM2228 1965
273/383, RH ............ 11.99 ea
MM2227 1965
273/383, LH ............ 11.99 ea
MM2228 1965-66 318, RH ................... 11.99 ea
MM2227 1965-66 318, LH ................... 11.99 ea
MM2250 1966-68 273, RH or LH......... 11.99 ea
MM2250 1966-71 383, RH or LH......... 11.99 ea
MM2250 1966-72 318, RH or LH......... 11.99 ea
MM2250 1972
340, RH or LH......... 11.99 ea
MM2250 1972-73 400/440, RH or LH . 11.99 ea
MM2325 1973-76 318, RH ................... 18.99 ea
MM2326 1973-76 318, LH ................... 18.99 ea
MM2325 1973
340, RH ................... 18.99 ea
MM2326 1973
340, LH ................... 18.99 ea
MM2325 1974
360, RH ................... 18.99 ea
MM2326 1974
360, LH ................... 18.99 ea
MM2369 1973-76 318/340/360, insert .. 11.99 ea
E-Body
MM2250 1970-74 318/340/383, RH/LH . 11.99 ea
K
MD2440
MM2376
MN1142
1966-71 Hemi Motor Mounts
Motor mounts for 1966-71 Mopar B and E-Body
models equipped with a Hemi engine. Each motor
mount meets or exceeds factory specifications for a
complete replacement.
MD2440 1966-70 LH, B-body ............ 129.99 ea
MN1142 1966-71 RH, all .................... 39.99 ea
MD2441 1970-71 LH, E-body ............. 129.99 ea
MD2441 1971
LH, B-body ............ 129.99 ea
1962-76 Engine Swap Motor Mount Sets
Make your engine swap easier with these motor mount
swap sets to position your motor in the engine bay!
Made in the USA.
1962-76 Motor Swap Mount Kits
Swap out your Slant 6 for a small block, big block or
Hemi V8 with these engine swap motor mount sets.
Each set includes engine mount brackets, engine
mounts and hardware. Motor mount conversion only;
other parts required to complete conversion.
1966-71 Hemi Frame Mounts
For Hemi engines only. Metal mounts for the frame.
MD4069 1966-71 Hemi ....................... 239.99 pr
MN1962
1967-74 Heavy Duty Motor Mounts
Heavy duty motor mounts designed to provide the
safety of an enclosed mount design, but also to provide
a direct steel-to-steel lock-up under acceleration. Power
is transmitted without excess motion and resultant
power loss. Clearances for headers and other tightfitting components can be closer due to reduced engine
motion, but engine vibration and harshness during
normal driving is isolated from the chassis as well as
with stock motor mounts. MityMounts® appear exactly
like stock motor mounts once installed. Made in USA.
with a lifetime manufacturer's warranty.
A-Body
MM7901 1967-73 V8 except Hemi...... 99.99 pr
B-Body
MM7902 1966-73 V8 except Hemi...... 99.99 pr
MM7903 1966-70 Hemi ....................... 399.99 pr
MM7904 1971
Hemi ....................... 399.99 pr
E-Body
MM7902 1970-74 V8 except Hemi...... 99.99 pr
MM7904 1970-74 Hemi ....................... 399.99 pr
398
Motor Mounts
MN9901
MN1963
1967-72 A-Body Motor Swap Mounts
If the factory motor just isn't 'adequate' for your 1967-72
A-Body, these engine-swap sets make it easy to remedy
the problem. With these sets, you can dump that Slant
6 for a 340 or 360 small block or convert to the more
powerful big blocks. Sets include frame mounts and
motor mounts; select sets include hardware.
Swap Mounts
MN1962 1967-72 340-360 ..................... 64.99 set
MN1963 1967-72 340-360 mounts only 59.99 set
MN1964 1967-72 R/RB ......................... 59.99 set
Replacement Mounts
MN1965 1968-72 SB frame mounts ...... 64.99 set
MN1966 1968-72 for MN1962 or MN1963 22.99 pr
MN1968 1968-72 SB, short ................... 21.99 pr
Note: *Swap requires custom headers/exhaust system.
Currently there are no manifolds or headers manufactured
for this swap.
A-Body
MN1940 1963-66 Slant 6 to 273-318 .. 144.99 set
MA4695 1963-66 Slant 6 to 340-360 .. 144.99 set
MA4696* 1963-66 Slant 6 to B/RB ...... 194.99 set
MN1509 1967-72 Slant 6 to 273/318 .. 159.99 set
MN1941 1967-72 Slant 6 to 340-360 .. 159.99 set
MA4697 1967-72 Slant 6 to B/RB ...... 159.99 set
MA4698 1967-72 small V8 to B/RB ... 159.99 set
MN1942 1973-74 Slant 6 to 273/318 .. 159.99 set
MN1943 1973-74 Slant 6 to 340-360 .. 159.99 set
MN1944 1973-74 Slant 6 to B/RB ...... 159.99 set
MN1945 1973-74 small V8 to B/RB ... 159.99 set
MN1946 1973-74 B/RB to 273/318 .... 159.99 set
MN1947 1973-74 B/RB to 340-360 .... 159.99 set
B-Body
MN1948 1962
273/318 to 340-360 229.99 set
MN1949 1962
small V8 to B/RB ... 254.99 set
MN1950 1963-65 273/318 to 340-360 144.99 set
MB6000 1963-65 small V8 to B/RB ... 144.99 set
MN1951 1966-70 Slant 6 to 273/318 .. 144.99 set
MN1952 1966-70 273/318 to 340-360 144.99 set
MD7102 1966-72 small V8 to B/RB ... 144.99 set
MN1942 1973-76 Slant 6 to 273/318 .. 159.99 set
MN1943 1973-76 Slant 6 to 340-360 .. 159.99 set
MN1944 1973-76 Slant 6 to B/RB ...... 159.99 set
MN1945 1973-76 small V8 to B/RB ... 159.99 set
MN1946 1973-76 B/RB to 273/318 .... 159.99 set
MN1947 1973-76 B/RB to 340-360 .... 159.99 set
E-Body
MD7102 1970-72 small V8 to B/RB ... 144.99 set
426 Hemi Motor Swap Mount Set
This Hemi conversion set offers factory-correct motor
position and race performance strength yet still retains
a smooth, insulated ride. This bullet-proof spool-type
mount set allows you mount a new crate or original
426 Hemi to your V8 K-member without additional
fabrication, K-member modifications, or additional
installation parts required. Accepts factory Hemi
manifolds, works with power steering, power brakes
and both automatic and manual transmissions. Includes
mounts and hardware.
Note: *Custom headers are required.
MN1953* 1962-65 B-Body ................... 259.99 set
MN9901 1966-72 B-Body ................... 259.99 set
MN9901 1970-74 E-Body ................... 259.99 set
Toll Free Order Line 800.854.1280
Motor Mounts
MN1932
51106G
MN1937
1973-76 Polyurethane Motor Mount Insert Set
MN1936
MN1147
1962-74 Torque Strap
Throw away your chains and broken motor mounts;
this torque strap can handle all the upgraded power
and excess vibration your Mopar small block or B/RB
engine can dish out. Features heavy duty rod ends for
adjustability, urethane bushings, DOM tubing and grade
8 hardware. Does not interfere with power steering and
does not require welding or major fabrication. Includes
powder coated torque strap, all necessary hardware and
instructions. Mounts in existing sway bar location on
some models. Made in the USA.
MN1936 1963-66
A-Body ............. 102.99 set
MN1937 1967-74
A-Body ............. 102.99 set
MN1938 1962-65
B-Body.............. 102.99 set
MN1939 1966-72
B-Body.............. 102.99 set
MN1939 1970-74
E-Body .............. 102.99 set
MN1149
1962-75 Poly-Loc™ Engine Mounts
These revolutionary new polyurethane locking mounts
offer a unique, heavy duty interlocking feature that
allows engine movement about the axis of engine
rotation, while providing a rugged mechanical lock
to keep your engine in place under hard acceleration.
Made from high quality steel, hand formed and welded,
then zinc dichromate plated for corrosion resistance,
these are the toughest polyurethane engine mounts on
the market. Made in USA.
Note: For use with original factory brackets.
* Poly spool replacement mounts.
This performance motor mount is firm enough to handle
high horsepower and torque output, yet is soft enough
to dampen excess vibration. Will not deteriorate when
exposed to underhood fluids. This set replaces right
and left side mount bushings. Available in red or black
polyurethane. Made in USA.
Note: Must reuse the existing bushing outer metal shells.
Add “G” to part number for black, “R” for red.
A-Body
51106
51106
51106
51106
51106
51106
B-Body
51106
1973
1973-76
1973-75
1973-76
1973-75
1973-76
Dart 318, 340 ...........
Dart 360 ...................
Duster 318, 340 .......
Duster 360 ...............
Valiant 318, 340 ......
Valiant 360 ..............
35.99
35.99
35.99
35.99
35.99
35.99
set
set
set
set
set
set
1973-74 all 318, 400, 440 ...... 35.99 set
MN2154
Motor Mount Hardware
273/318/340/360 .... 179.99
B/RB ....................... 179.99
273/318 ................... 179.99
340/360 ................... 179.99
B/RB ....................... 179.99
pr
pr
pr
pr
pr
sm block/big block ... 179.99
426 Hemi ................ 299.99
sm block & B/RB ... 179.99
426 Hemi ................ 299.99
273/318 ................... 179.99
340/360 ................... 179.99
B/RB ....................... 179.99
pr
pr
pr
pr
pr
pr
pr
This hardware installs directly in the center of the
motor mount brackets to attach them to the frame
mount. Made from steel as original.
MN2154 bolt, V8 .................................. 29.99 pr
MN2155 nut, V8 ................................... 5.99 pr
sm block & B/RB ... 179.99 pr
426 Hemi ................ 299.99 pr
1973-76 Prothane Motor Mount Insert Set
Polyurethane engine mounts limit unwanted movement
and control torque to transfer maximum energy to the
wheels. Polyurethane mounts are very durable and
resistant to oil, chemicals, and road contaminants that
deteriorate rubber mounts. Gain performance for the
street or track with these nearly indestructible mounts.
Made in USA.
A-Body
MN2710
1973
Dart 318, 340 ..... 41.99 set
MN2710
1973-76 Dart 360 ............. 41.99 set
MN2710
1973-75 Duster, 318, 340 . 41.99 set
MN2710
1973-76 Duster 360.......... 41.99 set
MN2710
1973-75 Valiant 318, 340 . 41.99 set
MN2710
1973-76 Valiant 360 ......... 41.99 set
B-Body
MN2710
1973-74 all 318, 400, 440 41.99 set
1973-76 Prothane Motor
& Transmission Mount Insert Set
Engine Support Bracket Bolt Set
1963-65 Race Hemi Motor Mount Brackets
These reproduction motor mount brackets for 196365 B-Bodies with 426 Hemi engine are made with
correct gauge steel and supplied bare (natural) finish.
Made in USA.
MN2864 1963-65 B-Bodies ................. 199.99 pr
These factory style bolts attach your engine support
brackets to the motor mount ears on the side of your
engine block. Made from high strength steel, this set
features correct thin style washers and fine thread bolts
as original. Perfect for high horsepower applications.
One set contains six bolt/washer/nut assemblies,
enough for both sides of the engine.
MN2415 all, set of 6 ............................. 17.99 set
These polyurethane transmission and motor mount
inserts are engineered for your specific application
to provide the performance of solid mounts without
the vibration and noise. Polyurethane stands up to the
elements better than rubber while limiting unwanted
movement and controlling torque so that all possible
energy is transferred to the wheels. Wheel hop is
reduced, along with potentially damaging drive train
movement. Gain performance for the street or track
with these nearly indestructible mount inserts!
Note: Will not work on 1973 340 models.
MN2711
1973-76
A & B-Body ....... 79.99 set
Motor Mounts
399
Engines & Components K
A-Body
MN1146 1967-72
MN1932 1967-69
MN1933* 1973-75
MN1934* 1973-75
MN1935* 1973-75
B-Body
MN1147 1962-65
MN1148 1966-70
MN1149 1966-72
MN1150 1971
MN1933* 1973-75
MN1934* 1973-75
MN1935* 1973-75
E-Body
MN1149 1970-74
MN1150 1970-71
51106R
Specialty Engine Tools
66963
Universal Dial Indicators
These dial indicators are great for any engine builder.
Both indicators are .001" graduation.
66963
0 to 0.250" ................................ 24.99 ea
66962
0 to 0 to 1.000" ......................... 24.99 ea
Mechanic’s Stethoscope
Harmonic Balancer Tool
This heavy-duty, professional harmonic balancer tool
is equipped with roller thrust bearings and includes
7/16"-20, 5/8"-18, and 3/4"-16 adapters as well as
various removal hardware. May also be used for
steering wheel and pulley installation and removal.
Maximum recommended torque is 150 ft. lbs.
66514
.................................................. 79.99 set
Locates the source of engine noise quickly. Listen for
trouble by tracing the sound of flowing water, oil, gas
or steam. Identify piston slap, worn gears, faulty valves,
water pump failure, damaged gaskets and defective
bearings. The handle is completely shock resistant.
Disassembles for storage.
Note: Keep this tool away from moving, rotating and
electrical components.
X835
.................................................. 18.99 ea
X2955
66787
Crankshaft Turning Sockets
Professional grade crankshaft turning socket is for
the serious engine builder and tuner. Easily attach an
oversized degree wheel to the socket.
67493
8 cylinder ................................. 24.99 ea
X2956
X2957
66791
Beam Type Torque Wrenches
Degree Wheels
K
Engines & Components
Find top dead center or check camshaft timing with
these degree wheels.
66787
degree wheel kit ...................... 109.99 set
66791
9" degree wheel ....................... 14.99 ea
Oil Pressure Switch Socket
Removes oil pressure sending unit on most engines.
The 3/8" drive socket has 1-1/16" hex opening plus
recess to accommodate switch. Also fits some brake
light switches. Can also be turned with 15/16" wrench.
X2569
.................................................. 9.99 ea
Directly measure a variety of torque values when
tightening fasteners. Pointer moves clockwise or
counterclockwise to measure torque in English and
metric. Satin finish scale reduces glare. Inch pound
models feature ball type handles which localize force,
assuring accuracy. Foot pound version has comfortable,
palm-fit handle to provide natural smooth, accurate
pull. Palm-fit handle pivots on beam to maintain
constant distance from drive point to load point for
precise measurement. Wrench can be easily calibrated
by bending pointer to zero before use. Serviceable
product. Non-ratchet.
X2955 1/4" fixed, inch/lbs ................... 54.99 ea
X2956 3/8" fixed, inch/lbs ................... 71.99 ea
X2957 1/2" fixed, foot/lbs .................... 65.99 ea
HD Piston Ring Compressor
Use this tool to install pistons 2-1/8" to 5" (54 mm to
127 mm) in diameter. Positive lock action provides
positive compression and fingertip release. Slip
tool over piston and tighten with L shaped wrench
to compress piston ring into piston grooves. Insert
piston into cylinder and tap with hammer to install.
Enlarged crimped edge prevents compressor from
entering cylinder.
X2284
.................................................. 10.99 ea
400
Engine Tools
Harmonic Balancer Puller
This tool bolts to balancers, pulleys, and gears with
tapped holes with the center screw on the end of the
crankshaft. Tighten while tapping on the screw head
to remove. A floating swivel prevents damage to the
shaft end. Designed to accommodate two or three hole
applications in most cars.
X2286
.................................................. 21.99 ea
Remote Starting Switch
Start the engine easily from under the hood! Features
heavy gauge, rubber covered copper wire. Simply
depress the button to jog or start the engine.
Y20750 .................................................. 19.99 ea
Toll Free Order Line 800.854.1280
Specialty Engine Tools
Swivoil Filter Wrench
Hard to reach oil filters will come off easily with
this swivel handle oil filter wrench. Swivel tension is
adjusted easily using the nut and bolt on the handle.
X3082 3-1/2" to 3-7/8" ........................ 9.99 ea
Y16910
Y16750
Valve Spring Compressor
Makes compressing the spring and removing the
keepers a simple job because there is no need to remove
the head. Faster than conventional compressors because
there is no need to readjust the tool after each spring.
Note: When space prohibits use of cam handle, replace the
handle with a bolt and turn the socket.
Y16750 compressor ............................... 41.99 ea
Y16910 bolt ........................................... 1.99 ea
MN1084
MN1084 detail
Permatex® Gasket Maker
Makes reliable formed in place gaskets that resist
cracking, shrinking and migrating. Coats pre-cut
gaskets to increase reliability. Resists auto and shop
fluids. Great for use on valve covers, intake manifold
end seals, timing covers, water pumps, and thermostat
housings. 3 oz. tube.
S80022 blue #6B ................................... 3.99 ea
S81160 red #26B ................................... 4.99 ea
S81878 copper #101B ........................... 5.99 ea
1960-76 Mopar Oil Pump Priming Shaft
Service replacement oil pump priming shaft for 196076 Mopar models. This hardened steel shaft is used
to prime the oil pump on all 1960-76 Mopar engines.
MN1084 .................................................. 9.99 ea
Form-A-Gasket Sealant
Slow drying, non-hardening sealant designed for
sealing cut gaskets and stamped parts. Allows for
easy disassembly if required. Temperature range of
-65ºF to 400ºF. Use where sealing is more important
than adhesion. Resists shop fluids and fuels. Great for
valve cover gaskets and oil pan gaskets. Comes in 3
oz. tube in your choice of standard or hi-temp formula.
S80016 3 oz.
.................................... 3.99 ea
S80088 3 oz. hi-temp........................ 15.99 ea
Top Dead Center Locator
66792
14mm threads ...........................
7.99 ea
Royal Purple Max Tuff Assembly Lube
66778
Make Engine Swaps
a Breeze with the Engine Tilter
The Engine Tilter works with standard engine hoists to
provide an additional axis to maneuver- adjust the angle
of the engine with a turn of the handle! The Engine
Tilter is rated for 1200 pounds, made from steel, weighs
only 14 pounds, and comes fully assembled. Includes
an upper lap link and four 20" chains. Made in USA.
MN2087 ................................................. 134.99 ea
MN1993
Flywheel Turner
Super Silicone Sealant
This tool hooks into the flywheel teeth to rotate
the crankshaft. Use when working on clutches,
transmissions, installing rings, or other jobs which
require the crankshaft to be in a specific position.
Spring tension aids tool engagement on the flywheel.
X2270
.................................................. 30.99 ea
Excellent for use with all types of gaskets. A rapid
curing adhesive/sealant can also be used as a sealant
between flanges, hose connectors, and similar close
fitting parts.
08661
clear, 3 oz. tube ........................ 9.99 ea
08662
black, 3 oz. tube ....................... 9.99 ea
Rod Bolts and Hardware
Mopar Performance replacement rod nut and bolt
sets (16 of each), for V8 engines. Grade 8 bolts for
use with stock rods. 3/8" diameter bolts for 1967 and
later small blocks and 7/16" diameter bolts for 196671 Street Hemi.
MN1993 3/8" ....................................... 99.99 set
MN1994 7/16" ..................................... 139.99 set
Engine Tools
401
Engines & Components K
Valve Lash Wrench Sets
Choose from a variety of different wrench sets for
valve lash adjustments. See below for availability.
66779
7/16" wrench, with 1/8" hex..... 19.99 set
66778
1/2" wrench, with 3/16" hex..... 19.99 set
With 3/16" & 7/32" Hex T-Handles
66780
9/16" wrench ............................ 19.99 set
66781
5/8" wrench .............................. 19.99 set
Max-Tuff is an ultra-tough,
synthetic lubricant designed for use
in reassembling repaired equipment.
Max-Tuff utilizes durable synthetic
molecules that adhere to metal
surfaces and create an extremely
strong barrier between surfaces.
This minimizes the possibility
of metal-to-metal contact while
providing excellent protection
against rust and corrosion to both
ferrous and nonferrous metals.
Max-Tuff is formulated with Royal
Purple’s proprietary Synslide
additive technology.
RP01335 8 oz. bottle ............................ 19.99 ea
RP12335 case of 12 - 8 oz. bottles ....... 215.99 cs
March Performance Pulleys
March “Ultra Drive” Front Mount
Serpentine Sets
This stylish serpentine conversion set solves the
problem of unreliable V-belt accessory drives for
Chrysler 383ci, 440ci and Hemi. No more belt
throwing or slipping. A unique combination bracket
mounts the alternator and A/C in a compact manner.
The power steering bracket accepts a standard Saginaw
pump. Three idlers guarantee plenty of belt wrap for
no-slip operation. Precision CNC machined from
6061-T6 aluminum for strength and perfect fit. Hard
coated on high wear areas and clear coated to eliminate
polishing in hard-to-reach places. Made in USA.
Note: Serpentine belts are not included in any of the sets, however the belt length is included below.
No further discounts apply.
Alternator bracket and tensioning rod
Crank pulley, water pump pulley and nose cover
Alternator pulley with nose cover
Power steering kit includes bracket, tensioning rod and pulley with cover
Air conditioning kit includes AC bracket, tensioner and AC nose cover
clear
powder coat finish
black
powder coat finish
K
Engines & Components
Serpentine Belt Deluxe Sets
Small Block Deluxe Sets
Alternator Only - 45" Serpentine Belt for 1970-76
318, 340 and 360
MN2602
clear powder coat............ 384.99 set
MN2608
black powder coat ........... 575.99 set
Alternator and A/C - 45" Serpentine Belt for 1970-76
318, 340 and 360
MN2605
clear powder coat............ 859.99 set
MN2611
black powder coat ........... 1099.99 set
Alternator and Canister Style keyway P/S - 45"
Serpentine Belt for 1970-76 318, 340 and 360
MN2603
clear powder coat............ 619.99 set
MN2609
black powder coat ........... 829.99 set
Alternator and Canister Style press fit P/S - 45"
Serpentine Belt for 1970-76 318, 340 and 360
MN2604
clear powder coat............ 619.99 set
MN2610
black powder coat ........... 829.99 set
Alternator, A/C and Canister Style keyway P/S - 45"
Serpentine Belt
MN2606
clear powder coat............ 859.99 set
MN2612
black powder coat ........... 1099.99 set
Alternator, A/C and Canister Style press fit P/S - 45"
Serpentine Belt
MN2607
clear powder coat............ 859.99 set
MN2613
black powder coat ........... 1099.99 set
402
Big Block Deluxe Sets
Alternator Only - 42.5" Serpentine Belt for 383
and 400
MN2614
clear powder coat............ 384.99 set
MN2624
black powder coat ........... 575.99 set
Alternator and Canister Style keyway P/S - 42.5"
Serpentine Belt for 383 and 400
MN2615
clear powder coat............ 619.99 set
MN2625
black powder coat ........... 829.99 set
Alternator and Canister Style press fit P/S - 42.5"
Serpentine Belt for 383 and 400
MN2616
clear powder coat............ 619.99 set
MN2626
black powder coat ........... 829.99 set
Alternator, A/C and Canister Style keyway P/S - 42.5"
Serpentine Belt for 383 and 400
MN2617
clear powder coat............ 869.99 set
MN2627
black powder coat ........... 1109.99 set
Alternator, A/C and Canister Style press fit P/S - 42.5"
Serpentine Belt for 383 and 400
MN2618
clear powder coat............ 869.99 set
MN2628
black powder coat ........... 1109.99 set
Alternator Only - 43.6" Serpentine Belt for 426, 440
and Crate Hemi
MN2619
clear powder coat............ 384.99 set
MN2629
black powder coat ........... 575.99 set
Alternator and Canister Style keyway P/S - 43.6"
Serpentine Belt for 426, 440 and Crate Hemi
MN2620
clear powder coat............ 619.99 set
MN2630
black powder coat ........... 829.99 set
Alternator and Canister Style press fit P/S - 43.6"
Serpentine Belt for 426, 440 and Crate Hemi
MN2621
clear powder coat............ 619.99 set
MN2631
black powder coat ........... 829.99 set
Alternator, A/C and Canister Style keyway P/S - 43.6"
Serpentine Belt for 426, 440 and Crate Hemi
MN2622
clear powder coat............ 869.99 set
MN2632
black powder coat ........... 1069.99 set
Alternator, A/C and Canister Style press fit P/S - 43.6"
Serpentine Belt for 426, 440 and Crate Hemi
MN2623
clear powder coat............ 869.99 set
MN2633
black powder coat ........... 1109.99 set
March Performance Pulleys
Combination Alternator / AC bracket and
Rear Support
Power Steering Bracket, and Support
Power Steering Pulley with cover
AC Compressor Cover
Crank pulley, Water Pump pulley and Nose
Cover
Alternator Pulley with Cover
Belt Tensioning Rod
Idlers and Covers
Grade 8 mounting hardware
Serpentine Belt Ultra Sets
Ultra Sets
Note: will not work with billet alternator, also requires a
electric fuel pump.
Alternator, A/C and Canister Style keyway P/S - 82"
Serpentine Belt for 383
MN2590
clear powder coat............ 1129.99 set
MN2596
black powder coat ........... 1329.99 set
Alternator, A/C and Canister Style keyway P/S - 82"
Serpentine Belt for 440
MN2592
clear powder coat............ 1129.99 set
MN2598
black powder coat ........... 1329.99 set
Alternator, A/C and Canister Style keyway P/S - 83.5"
Serpentine Belt for Hemi
MN2594
clear powder coat............ 1129.99 set
MN2600
black powder coat ........... 1329.99 set
Alternator, A/C and Canister Style press fit P/S - 82"
Serpentine Belt for 383
MN2591
clear powder coat............ 1129.99 set
MN2597
black powder coat ........... 1329.99 set
Alternator, A/C and Canister Style press fit P/S - 82"
Serpentine Belt for 440
MN2593
clear powder coat............ 1129.99 set
MN2599
black powder coat ........... 1329.99 set
Alternator, A/C and Canister Style press fit P/S - 83.5"
Serpentine Belt for Hemi
MN2595
clear powder coat............ 1129.99 set
MN2601
black powder coat ........... 1329.99 set
Toll Free Order Line 800.854.1280
March Performance Pulleys
March “Revolver” Serpentine Sets
This highly styled one piece bracket, designed
especially for Big Block Mopar models and Hemi
is CNC machined from 6061-T6 aluminum for
strength and perfect fit. Provides a rigid backbone
for the alternator and A/C compressor, while a
separate bracket allows the addition of a power
steering pump, if desired. Four separate idlers
guarantee no-slip operation. Hard coated on high
wear areas and clear powder coated to eliminate
polishing in hard to reach places. Made in USA.
Note: No further discounts apply.
black onyx
powder coat finish
black
powder coat finish
chrome finish
clear
powder coat finish
Power Steering Pulley Nose Cover
Mounting Hardware
Kits with Power Steering Include
GM Type 2 Power Steering Pump
(Hoses & Reservoir Not Included)
Chrome or Billet Canister Style Power Steering Pump
(where listed)
Power Steering Pulley w/Nose Cover
Idler
Bracket with mounting hardware
105 Amp Alternator, Chrome
Alternator Pulley w/Fan & Nose Cover
Matching Chrome AC compressor
AC Compressor Nose Cover
Polished Aluminum Water pump
Hard coated Water Pump Pulley
Alternator/AC Bracket
Crank Hub Adapter
Larger Diameter Crankshaft Pulley
Idlers
Belt Tensioning Tool
383, 440 & 426 Hemi Revolver Serpentine Sets
Billet Alternator and Billet Canister style P/S Pump
Note: Revolver Sets without power steering are for 71.5" serpentine belts.
MN2648
MN2685
MN2689
MN2652
clear powder coat ...........................................................
chrome ...........................................................................
black onyx powder coat ................................................
black powder coat ..........................................................
Remote Power Steering Pump and AC
2069.99
2785.99
2269.99
2269.99
set
set
set
set
MN2651
MN2688
MN2692
MN2655
clear powder coat ........................................................... 2359.99
chrome ........................................................................... 3119.99
black onyx powder coat ................................................. 2559.99
black powder coat .......................................................... 2559.99
Chrome Alternator and Canister style PS Pump
set
set
set
set
Note: Revolver Sets with chrome alternator and chrome power steering pumps are for 67.5"
serpentine belts.
MN2650
MN2687
MN2691
MN2654
clear powder coat ...........................................................
chrome ...........................................................................
black onyx powder coat .................................................
black powder coat ..........................................................
1679.99
2329.99
2009.99
2009.99
set
set
set
set
1949.99
2649.99
2139.99
2139.99
set
set
set
set
Chrysler 5.7 Hemi Revolver Serpentine Sets
Note: Revolver Sets with Remote Power Steering and AC are for 81.5" serpentine belts.
MN2649
MN2686
MN2690
MN2653
clear powder coat ...........................................................
chrome ...........................................................................
black onyx powder coat .................................................
black powder coat ..........................................................
Alternator and AC Only
Note: Revolver Sets without power steering are for 71.5" serpentine belts.
MN2634
MN2693
MN2695
MN2636
clear powder coat ...........................................................
chrome ...........................................................................
black onyx powder coat .................................................
black powder coat ..........................................................
Alternator, AC and P/S Pump
1859.99
2545.99
2049.99
2049.99
set
set
set
set
Note: Revolver Sets with AC and power steering pumps are for 80.5" serpentine belts.
MN2635
MN2694
MN2696
MN2637
clear powder coat ...........................................................
chrome ...........................................................................
black onyx powder coat .................................................
black powder coat ..........................................................
March Performance Pulleys
2199.99
2885.99
2359.99
2359.99
set
set
set
set
403
Engines & Components K
Note: Revolver Sets without billet alternator and billet power steering pumps are for 67.5"
serpentine belts.
Alternator and AC Only
Aftermarket Pulley Systems
March “Style-Track”
Serpentine Systems
Enjoy high style, low
cost excitement for your
Chrysler Small Block
V8. This set includes a
one-piece alternator and
air conditioning bracket
for rigid support, while a
separate bracket allows the
addition of a power steering
pump, if desired. Four separate
idlers guarantee no-slip operation,
while maintenance-free powder
coating in your choice of Clear, Black,
or Black Onyx lets you forget about
polishing. Made in USA.
MN2659
MN2660
MN2662
MN2661
Note: Serpentine belt is not included with any set, however length of belt is listed below and
included in the instructions. No further discounts apply.
MN2663
black onyx
black
powder coat finish powder coat finish
105 Amp Alternator, Chrome
Alternator Pulley with Fan
& Nose Cover
Chrome AC Compressor
Water Pump & Hardcoated Pulley
Alternator and P/S Bracket
Crankshaft Pulley
chrome finish
Belt Tensioning Tool
Mounting Hardware
Power Steering Bracket
4 Idlers (for better belt wrap)
GM Type 2 Power Steering Pump
(Hoses & Reservoir Not Included)
MN2665
K
Engines & Components
318, 340 & 360 Style-Track Serpentine Sets
Alternator and AC Only
Serpentine Sets for 69" Belts
MN2638
clear powder coat ........................................................... 1969.99
MN2697
chrome ........................................................................... 2649.99
MN2702
black onyx powder coat ................................................. 2139.99
MN2643
black powder coat .......................................................... 2139.99
Remote Power Steering Pump and AC
Remote Type Reservoir Power Steering - 80" Belt
MN2639
clear powder coat ........................................................... 2229.99
MN2698
chrome ........................................................................... 2879.99
MN2703
black onyx powder coat ................................................. 2429.99
MN2644
black powder coat ......................................................... 2429.99
Canister Style Power Steering - 81.5" Belt
MN2640
clear powder coat ........................................................... 2379.99
MN2699
chrome ........................................................................... 3029.99
MN2704
black onyx powder coat ................................................. 2574.99
MN2645
black powder coat .......................................................... 2574.99
Chrome Alternator and Canister style P/S Pump
Chrome Alternator and Chrome Canister Type Power Steering Pumps
MN2641
clear powder coat ........................................................... 1669.99
MN2700
chrome ........................................................................... 2309.99
MN2705
black onyx powder coat ................................................. 1959.99
MN2646
black powder coat .......................................................... 1959.99
Billet Alternator and Canister style P/S Pump
Billet Alternator and Billet Canister Type Power Steering Pumps
MN2642
clear powder coat ........................................................... 1859.99
MN2701
chrome ........................................................................... 2545.99
MN2706
black onyx powder coat ................................................. 2195.99
MN2647
black powder coat .......................................................... 2195.99
404
MN2664
clear
powder coat finish
Aftermarket Pulley Systems
MN2666
MN2656
MN2668
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
MN2658
Accessories for March Performance Pulley Systems
Billet valve cover emblems and air cleaners for March Performance pulley systems.
Complement the style of your engine’s pulley system with these accessories. Fits
5-1/8" standard carburetor necks. Made in USA.
Note: No further discounts apply.
Billet Aluminum Air Cleaners
MN2659
Grande Style Track, chrome finish ................................. 879.99
MN2660
Grande Revolver, chrome finish ..................................... 879.99
MN2661
Grande Revolver, black onyx finish ............................... 879.99
MN2662
Style Track, chrome finish .............................................. 754.99
MN2663
Revolver, chrome finish .................................................. 849.99
MN2664
Pro Track, chrome finish................................................. 889.99
MN2665
Pro Track, black onyx finish ........................................... 889.99
MN2666
Pro Track Fuelie, chrome finish...................................... 1299.99
MN2667
Futura, clear powder coat finish ..................................... 469.99
MN2668
Futura, chrome finish ...................................................... 619.99
Billet Aluminum Valve Cover Emblems
MN2656
Futura emblem with carbon fiber insert.......................... 319.99
MN2657
Circle Track emblem ...................................................... 269.99
MN2658
Revolver emblem............................................................ 269.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
pr
pr
pr
Toll Free Order Line 800.854.1280
Crank & Accessory Pulleys
Crankshaft Pulley Bolt Set
This special steel bolt set is used to attach the crankshaft pulley to the damper.
Made from steel.
MN2412
all engines
set of 6 ..................................................... 7.99 set
MN2670
MD2369
MD2370
MN2677
March Performance V-Belt Pulley Sets
MD2371
MD2374
Bouchillon Performance Crankshaft Pulleys
Warning Concerning Crankshaft Pulleys
Stock replacement, aftermarket stamped steel or cast iron pulleys are not designed
to exceed 400 horsepower or 6000 RPM. Using reproduction pulleys on engines in
excess of these limits may result in catastophic disintegration of the pulley causing
severe damage to the engine, cooling system and body parts. Classic Industries®
assumes no liability for damages caused by improper usage of pulleys. Please be
sure to install the pulley properly to avoid damages that could occur from improper
installation or exceeding the recommended RPM limitations.
Important: *2 V-belt pulley replaces 1 V-belt pulley
Note: No further discounts apply.
Performance Ratio Pulley Sets
1967-69 273, 318 & 340
MN2671
1V crank, 1V water pump, 1V alternator......................... 249.99
MN2672
2V crank, 1V water pump, 1V alternator......................... 249.99
1970-76 318, 340 & 360
MN2669
1V crank, 1V water pump, 1V alternator......................... 229.99
MN2670
2V crank, 1V water pump, 1V alternator......................... 249.99
383, 440 and Crate Hemi
MN2673
1V crank, 1V water pump, 1V alternator......................... 229.99
MN2674* 2V crank, 2V water pump, 1V alternator......................... 244.99
High Flow Ratio Pulley Sets
Small Block 318, 340 & 360
MN2675
1V crank, 1V water pump, 1V alternator......................... 239.99
MN2676
2V crank, 1V water pump, 1V alternator......................... 254.99
MN2677
3V crank, 1V water pump, 1V alternator......................... 249.99
Big Block 383, 440 & Crate Hemi
MN2678
1V crank, 1V water pump, 1V alternator......................... 249.99
MN2679* 2V crank, 2V water pump, 1V alternator......................... 249.99
MN2680
4V crank, 1V water pump, 2V alternator......................... 249.99
Performance Ratio for Fluidampr Balancers
Small Block 318, 340 & 360
MN2681
1V crank, 1V water pump, 1V alternator......................... 239.99
MN2682
2V crank, 1V water pump, 1V alternator......................... 249.99
Big Block 383, 440 & Crate Hemi
MN2683
1V crank, 1V water pump, 1V alternator......................... 239.99
MN2684* 2V crank, 2V water pump, 1V alternator......................... 249.99
Crank Pulleys . Pulley Sets
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
405
Engines & Components K
Can’t find the correct pulleys to complete your vehicle? We have the solution.
Original style pulleys are available for all popular applications, including all big block
combinations, with or without power steering or air conditioning. Also available for
small block, with aluminum water pump and with or without power steering. Power
steering pulleys are for Saginaw pumps on B, RB and Hemi engines. Available in
your choice of black or chrome.
Crankshaft Pulley
MD2369 single groove all
A/B/RB/Hemi black ........ 54.99 ea
MD2370 single groove all
A/B/RB/Hemi chrome ..... 64.99 ea
MD2371 double groove w/PS
A/B/RB/Hemi black ........ 79.99 ea
MD2372 double groove w/PS
A/B/RB/Hemi chrome ..... 89.99 ea
MD2373 four groove
w/PS & AC B/RB/Hemi
black ........ 159.99 ea
MD2374 four groove
w/PS & AC B/RB/Hemi
chrome ..... 159.99 ea
March performance V-Belt pulleys can free up 12-15 horsepower at the rear wheels.
These pulleys eliminate belt throwing and reduce accessory drag. They also increase
water pump speed to improve cooling. Features a clear powder coat to eliminate
polishing. Sets include crank pulley, water pump pulley, and alternator pulley with
cover. Made in USA.
Harmonic Balancers
MN1088
MN2712
MD2385
MN2713
MN2714
Fluidampr Harmonic Balancers
MN1093
MN1143
K
Engines & Components
1962-91 Harmonic Balancers & Crankshaft Keys
1962-70 Big Block Harmonic Balancer
Harmonic balancer for 1962-70 361-440 engines with forged crank. Balancer features
a steel ring, universal 6-bolt front pulley mounting style and is SFI-approved.
MN1088
1962-70
361-440 ....................................................... 499.99 ea
1966-71 426 Hemi Harmonic Balancer
Harmonic balancer for 1966-71 426 Hemi engines. Balancer features a steel ring,
universal 6-bolt front pulley mounting style and is SFI-approved.
MN1089
1966-71
426 Hemi .................................................... 499.99 ea
1966-72 Big Block and Hemi Harmonic Balancer
Fluid harmonic balancer for 1966-72 Big Block and 426 Hemi engines with a steel
crankshaft. Balancer features universal 6-bolt front pulley mounting style.
MD2385
1966-72
big block & Hemi ....................................... 279.99 ea
1967-91 Small Block Harmonic Balancer
Harmonic balancer for 1967-91 273-318-340 engines with forged crank. Balancer
features a steel ring, universal 6-bolt front pulley mounting style and is SFI-approved.
MN1090
1967-91
273-318-340 ............................................... 499.99 ea
1967-76 273/318 Small Block Harmonic Balancer
Production-style thin crank vibration damper is designed for all production based
small block engines. Not SFI- approved.
MN1092
1967-76
273-318-340 ............................................... 194.99 ea
1971-76 360 Small Block Harmonic Balancer
Externally-balanced balancer for 1971–76 360 "LA" Engines. Not SFI approved.
MN1995
1971-76
360 .............................................................. 119.99 ea
1972-76 400 Big Block Harmonic Balancer
1972-76 400 cast crank engines. Steel ring style. SFI approved.
MN1996
1972-76
400 .............................................................. 489.99 ea
Crank Key Set
Locates the crank sprocket on the nose of the crank. Includes 2 woodruff keys.
MN1093
all
2 pc set ........................................................ 6.99 set
Crankshaft “Oil Slinger”
Fits in between the balancer and the front of the crankshaft on all V8 engines.
Protects the engine in two ways - keeping excessive oil away from the crankshaft
front seal and forces oil back onto the timing chain, keeping it properly lubricated
under heavy usage.
MN1143
all engines .................................................................... 7.99 ea
Mopar Harmonic
Balancer Bolt Sets
To ensure that the balancer stays
locked in position, use ultra strong
200,000 psi bolts from ARP that let you
exert maximum clamping force. Features
1/4" thick, wide-area washers and extra tall
AR1442
12-point heads that accept deep sockets and
prevent stripping the head. Made in USA.
AR1441 318-440 & 426 Hemi thin balancer .................................... 24.99 set
AR1442 318-440
thick damper.................................... 29.99 set
AR1443 5.7L & 6.1L Hemi
......................................................... 34.99 set
406
Harmonic Balancers
These Fluidampr viscous dampers by Horschel Motorsports are among the best
dampers on the market. Instead of a rubber, or “elastomer” dampening material that
deteriorates over time, a silicone gel is used inside the damper to keep the flywheel
in place and function as the insulator for the internal flywheel. This significantly
reduces the risk of catastrophic failure that can occur when rubber dampers wear
out. Measure 7-1/4" outer diameter, feature a steel construction, 1.5295" minimum
and 1.5305 maximum bore diameter, and are finished in black zinc chromate. Made
in the USA.
Note: *Minor modification may be necessary to the stock crank pulley.
MN2712* 318, 340, 360 A/LA V8 .................................................... 519.99 ea
MN2713
MN2714
383, 426, 440 and 426 Hemi V8 ....................................... 505.99 ea
331, 354, 392 early Hemi V8 ........................................... 449.99 ea
MN2724
MN2718
MN2719
Pro Race SFI-Approved Harmonic Balancers
Pro Race harmonic balancers are designed for a wide range of high performance
applications. These performance dampers are direct replacements for cast iron
factory originals and are SFI approved for racing. PRO/STREET balancers measure
7.25" in diameter and 1.00" in thickness. PRO/RACE balancers measure 7.01" in
diameter and 1.54" in thickness. PRO/SPORT balancers measure 6.61" in diameter
and 1.52" in thickness, while PRO/STREET Underdrive balancers measure 5.86"
in diameter and 1.67" in thickness.
CAUTION: PRO/STREET or PRO/SPORT counterweights are not interchangeable with
PRO/RACE counterweights.
Note: *Fits 426 Hemi engine with slight TDC adjustment detailed in instruction manual that
is supplied. Will not fit early 354 & 392 Hemi engines.
Small Block Engines
PRO/STREET Bonded Nodular Iron Balancers
MN2715
273-360 V8
internally balanced .................................. 95.99 ea
MN2716
318-360 V8
externally balanced ................................. 99.99 ea
PRO/SPORT All-Steel Balancers
MN2722
273-360 V8
internally balanced .................................. 159.99 ea
MN2723
318-360 V8
externally balanced ................................. 169.99 ea
PRO/RACE All-Steel Balancers
MN2719
273-360 V8
internally balanced .................................. 339.99 ea
MN2720
318-360 V8
externally balanced ................................. 359.99 ea
Big Block Engines
PRO/STREET Balancers
MN2717* 383-440 V8
internally balanced .................................. 94.99 ea
PRO/SPORT Balancers
MN2724
383-440 V8
internally balanced .................................. 169.99 ea
PRO/RACE Balancers
MN2721* 383-440 V8
internally balanced .................................. 339.99 ea
New Hemi V8 Engines
PRO/SPORT Underdrive Balancers - 20% Reduction
MN2718
5.7 Hemi V8 internally balanced ................................... 249.99 ea
Toll Free Order Line 800.854.1280
Engine Sealing Components
MN2025
1960-2003 Mopar Performance Engine Teardown Gasket Sets
Mopar Performance engine teardown gasket sets give you all the gaskets needed for
a complete engine teardown, including oil pan, cylinder head, valve cover, timing
chain cover, intake manifold, exhaust and oil pump.
Small Block Engines
MN2022
1971-91 340/360 ........................................................... 139.99 set
MN2021
1992-03 318 Magnum ................................................... 162.99 set
MN2023
1992-03 360 Magnum ................................................... 159.99 set
Big Block Engines
MN2024
1960-76 383/400 ........................................................... 89.99 set
MN2025
1960-76 426/440 Wedge ............................................... 89.99 set
Hemi Engines
MN2026
1966-71 426 Hemi ........................................................ 129.99 set
MN2063
1963-76 Mr. Gasket Ultra-Seal Engine Overhaul Gasket Sets
Ultra-Seal engine gasket sets are designed for high performance applications to
provide maximum sealing of bi-metal (cast iron/aluminum cylinder head) engines.
Includes Ultra-Seal cylinder head, intake, exhaust, valve cover and oil pan gaskets
and standard timing cover, fuel pump, thermostat, water pump and rear main seals.
MN2061
1975-76 273, 318 ......................................................... 174.99 set
MN2063
1971-76 340, 360 ......................................................... 174.99 set
MN2065
1963-76 361-440 exc. Hemi ........................................ 174.99 set
Engine Block Pipe Plug Set
MN2064
1963-76 Mr. Gasket Standard Engine Overhaul Gasket Sets
These engine overhaul sets include all the gaskets and seals needed for stock, moderate
performance engine rebuilds and meet or exceed OE gasket and seal specifications.
MN2060
1967-76 273, 318 ........................................................... 79.99 set
MN2062
1971-76 340, 360 ........................................................... 81.99 set
MN2064
1963-76 361-440 except Hemi....................................... 74.99 set
Note: Four internal oil galley plugs will also be needed. These are included with the freeze
plug kits.
MN2411
MN2134
V8 ......................................................................................
9.99 set
MN2135
1967-76 Mr. Gasket Camshaft Change Gasket Set
Milodon Brass Freeze Plug Sets
Cam Change gasket sets give you all that is needed to change out your camshaft.
This set includes valve cover, oil pan, fuel pump, water pump, intake manifold,
timing cover gaskets and timing cover seal.
MN2056
1967-76 273, 318 ......................................................... 44.99 set
MN2056
1971-76 340, 360 ......................................................... 44.99 set
Your engine deserves the best, and Milodon brass freeze plugs will not rot like steel
alternatives. Sets include all the necessary external block freeze plugs, camshaft
and oil galley plugs for a complete engine.
MN2134
273-360 .............................................................................. 39.99 set
MN2135
383-440 .............................................................................. 19.99 set
Engine Seal Kits
407
Engines & Components K
MN2056
This convenient set includes ten pipe plugs you will need for the entire outside of
the engine. This set includes oil galley port plugs for the top rear of the block, fuel
pump pushrod port plugs, water pump housing and heater hose port plugs, coolant
drain plugs (below the freeze plugs), and intake vacuum port plug. Because various
plug and thread sizes will be needed depending on the components used, this set
includes multiple plugs to handle most applications.
Timing Components
MN2131
Keyway Adjustable Billet Timing Chain Set
Mopar Performance Timing Chain Sets
High strength Mopar Performance double roller chain
provides added durability and decreased rotational
friction versus the production silent chain. Crank
sprocket features three matched keyways to adjust cam
timing. Set includes cast iron magna-fluxed sprockets
and a roller timing chain.
373-360 Small Block
MN2146 1964-76 ............................... 79.49 set
383-440 Big Block
MN2147 1960-76 1 bolt gear .............. 119.99 set
MN2148 1966-71 3 bolt gear .............. 116.99 set
426 Hemi
MN2148 1966-71 3 bolt gear .............. 116.99 set
MN2126
1960-76 High Energy Timing Chain Set
High Energy Timing Chain sets exceed all original
equipment timing chain specifications. Premium
quality link belt type timing chain for exceptional
durability. Ideal for stock replacement and mild
performance application. The camshaft and crank gear
sprockets are made from cast iron.
Note: *Features a single bolt gear and will not fit 426 Hemi
or 440 Six Pack.
MN2126 1960-76 273-360 & 318A...... 34.99 set
MN2127* 1960-76 383-440 ................... 39.99 set
Keyway Adjustable Billet Timing Chain sets are
ideal for all street performance and race applications.
It includes a Torrington roller thrust bearing for
reduced friction. Features a 9 keyway crank sprocket
for 2-degree incremental adjust ability, 8-degree
maximum advance/retard. The gears are induction
hardened and precision machined steel billet gears
for bullit proof durability. The chain is pre-stretched,
heat treated double roller timing chain with heavy-duty
large pin design.
Note: Choose from single or three bolt camshaft gears.
MN2131
MN2132
MN2133
MN2133
273-360
383-440
383-440
426 Hemi
single bolt cam.....
single bolt cam.....
three bolt cam ......
three bolt cam ......
115.99
115.99
115.99
115.99
set
set
set
set
Chrome Timing Chain Cover/Timing Tab
This beautiful chrome-plated front timing cover fits
Chrysler 383, 400, 426 (including Hemi) and 440
engines.
T9392
big block and Hemi .................. 12.99 ea
Edelbrock Performer-Link
Timing Chain & Gear Sets
Performer-Link timing
chain & gear sets are for
use with Edelbrock cams.
They have a solid-bushing
chain for a true bearing
surface that rolls with the
sprockets, eliminating chain
stretch. Cam sprockets
are made with 35,000 psi
tensile strength cast iron,
crank sprockets are made
from billet SAE-1144 steel
and induction heat treated.
All timing chain sets have
E7805
three keyway setting points
to ensure accurate timing
selection for early or late-model vehicles. PerformerLink timing sets are not for use above 6500 rpm.
Note: Not legal for sale or use on pollution
controlled motor vehicles. No further
discounts apply.
E7803
E7804
E7805
1956-90 small block .............. 59.99 ea
1955-80 big block (1 bolt) ..... 59.99 ea
1955-80 big block (3 bolt) ..... 74.99 ea
1970-76 Mopar Timing Chain Cover Set
Mopar Performance timing cover made from cast
aluminum fits all 1970 and later (318/340/360) small
block engines. This cover has a natural finish that has
the timing mark cast into it. Includes the seal and gasket.
Note: This cover will also fit 1967-69 273/318/340 engines
but will has a different timing mark location than the
originals.
K
Engines & Components
MN2018 1970-76 ...............................
109.99 ea
MN2128
Magnum Double Roller Timing Chain Set
Magnum Double Roller Timing chain sets are ideal
for street or performance applications. They feature
a 3 keyway crank sprocket for 4-degree incremental
adjust ability, 4-degree maximum advance/retard. The
camshaft gear is made from induction hardened cast
iron and the crank sprocket is billet steel. The chain
is a heavy-duty pre-stretched heat-treated true double
roller timing chain
Note: MN2129 is made with a single bolt cam gear and
will not fit 426 Hemi or 440 Six Pack. MN2130 has a 3 bolt
cam gear design.
MN2128
MN2129
MN2130
MN2130
408
1960-76
1960-76
1960-73
1960-73
273-360 & 318A......
383-440 ..................
383-440 B/RB .........
426 Hemi .................
52.99
52.99
52.99
52.99
set
set
set
set
3361S
1963-74 Melling Timing Chain Sets
Three piece timing set includes timing chain, cam
sprocket and crankshaft sprocket.
3361S 1964-74 273, 318, 360............. 24.99 set
3168SA 1963-65 426 Wedge................. 99.99 set
3168S 1966-74 426 Hemi .................. 99.99 set
3168S 1966-74 440 w/3 2BBL carbs . 99.99 set
3160S 1968-73 340............................. 51.99 set
Timing Chains . Timing Covers
1960-76 Chrome Timing Tab
Designed for use with chrome aftermarket timing
cover. Fits all big block Chrysler engines including
late 426 Hemi. Sold as a replacement only. Will not
fit with the stock cover.
T9393
1960-76 big block and Hemi . 3.99 ea
Toll Free Order Line 800.854.1280
Timing Components
1964-74 Engine Fastener Kit
1960-76 Mr. Gasket Timing Cover Seal
Mr. Gasket timing cover seals are a neoprene-rubber
style that will last. Available for small block engines.
MN2059 1960-76 273-360 ...............
8.99 ea
TCS124602
1964-74 Fel-Pro Timing Cover Gaskets
MN2016
Correct replacement timing cover gaskets for Mopar
V8 engines manufactured by Fel-Pro.
TCS65631 1964-74 273, 318 .............. 27.99 pr
TCS65631 1964-74 340, 360 .............. 27.99 pr
TCS124602 1964-74 383, 400 .............. 19.99 pr
TCS124602 1964-74 413, 440 .............. 19.99 pr
TCS124602 1964-74 426 Hemi/Wedge 19.99 pr
Mopar Performance
Camshaft Sprocket Attaching Hardware
Buy one of these and get the correct engine fasteners in
one kit. Each fastener kit is correct, from head markings
to size and finish. If you want to do a first class job on
your engine, try one of these kits. Each kit typically
includes fasteners for the following: carburetor, choke,
crank pulley, distributor hold down, intake & exhaust
manifolds, fuel pump, oil pan, water pump and many
others. If it is a fastener for the exterior of the engine, it
is probably in this kit. Individually bagged and labeled
for simplified installation.
MD2348 1964-67 383, 440 .................. 199.99 kit
MD2349 1964-67 273, 318 .................. 136.99 kit
MD2350 1966-67 426 Hemi ................ 289.99 kit
MD2351 1967-70 340 .......................... 146.99 kit
MD2352 1968-69 426 Hemi ................ 324.99 kit
MD2353 1968-69 383, 440 .................. 199.99 kit
MD2354 1968-70 273, 318 .................. 146.99 kit
MD2355 1969-71 440 Six Pack ........... 227.99 kit
MD2356 1970
340 Six Pack ........... 178.99 kit
MD2357 1970
426 Hemi ................ 346.99 kit
MD2358 1970-74 383, 440 .................. 199.99 kit
MD2359 1971
426 Hemi ................ 367.99 kit
Required when a fuel pump eccentric is used. The
273-360 LA engines include washer, the B/RB and
Hemi engines are either 1 bolt or 3 bolt design.
MN2015 LA engines, w/washer ............ 17.99 set
MN2016 B/RB/Hemi, 1 bolt design ...... 3.39 set
MN2017 B/RB/Hemi, 3 req .................. 14.99 set
MN2057
Mr. Gasket Timing Cover Gasket Set
1969-92 Mopar Performance
Small Block Timing Chain Cover Bolt Set
Mr. Gasket timing cover sets are made from a highdensity cork/rubber blend material.
MN2057 1960-76 273, 318 ................ 12.99 set
MN2057 1960-76 340, 360 ................ 12.99 set
MN2058 1960-76 361-440 ................. 10.99 set
Stainless Engine Bolt Kits
MN2020
1958-78 Mopar Performance
Big Block Timing Chain Cover Bolt Set
Complete set of chrome timing chain cover bolts for
all B/RB 1958-78 big block and 426 Hemi engines.
Includes 8 bolts and 4 chrome washers per set.
MN2020 1958-78 ................................. 29.99 set
Perfect for the person who wants rust free engine
hardware and are ideal for use when rebuilding or for
detailing for a first class appearance.
Small Block Engines
63241
with metal valve covers............ 54.99 kit
Big Block Engines
63146
with cast valve covers .............. 54.99 kit
63142
with metal valve covers............ 49.99 kit
Hemi Engines
63331
with cast valve covers .............. 49.99 kit
6300
with metal valve covers............ 54.99 kit
Engine & Accessory Fastener Sets
These engine & accessory fastener sets provide
everything needed to attach most engine components
and accessories. Available with black oxide finish for
traditionalists or in 300 series stainless steel for those
wanting extra corrosion resistance and luster. Sets
include fasteners for the intake manifold, valve covers,
thermostat housing, alternator bracket, distributor
bracket, motor mounts, oil pan, coil bracket, headers,
front cover, water pump, and fuel pump bolts. Made
in USA.
Black Oxide Hex Head
MN2094 318,340 & 360 Wedge........... 159.99 set
MN2098 383 & 440 Wedge.................. 149.99 set
Black Oxide 12 Point Head
MN2095 318,340 & 360 Wedge........... 159.99 set
MN2099 383 & 440 Wedge.................. 149.99 set
Stainless Steel Hex Head
MN2092 318,340 & 360 Wedge........... 204.99 set
MN2096 383 & 440 Wedge.................. 189.99 set
Stainless Steel 12 Point Head
MN2093 318,340 & 360 Wedge........... 204.99 set
MN2097 383 & 440 Wedge.................. 189.99 set
Timing Components . Engine Fasteners
409
Engines & Components K
Set of chrome timing chain cover bolts for 1969-92
small block engines. Includes 10 bolts per set.
MN2019 1969-92 ................................. 59.99 set
MN2098
Cylinder Heads
E60779
Mopar Performance Small Block Cylinder Heads
Based on the Magnum R/T big-valve head design, this head is machined to fit
318/340/360 Mopar small block intake manifolds made through 1991. Outflows
the original "X" and "J" casting 340/360 heads.
E60189
Note: Shipped overweight.
MN1984
small block....................................................................... 639.99 ea
E60929
1961-85 Edelbrock Cylinder Heads
Mopar Performance Cast Iron Big Block Cylinder Heads
Stage V cast iron cylinder head for big block wedge engines. Feature heat crossover
for improved drivability. Uses standard big block valve gear, gaskets and valve
covers. For use with 6-bolt valve covers, rocker shaft pedestals cast-in and offset
intake rockers.
Note: Shipped overweight.
MN1985
big block .......................................................................... 699.99 ea
1962-64 Mopar Performance Max Wedge Cylinder Heads
Designed to replace 1962-64 Max Wedge heads these cast iron heads feature a
large port window and a revised short side radius exhaust port for increased flow.
Features 2.08" intake, 1.88" exhaust, a closed combustion chamber, six-bolt valve
covers, and cast-in pedestals.
Note: Shipped overweight.
K
Engines & Components
MN1982
1962-64
Max Wedge ..................................................
919.99 ea
MN2871
1966-71 Mopar Performance Hemi Cylinder Heads
New Mopar Performance cylinder heads for Hemi engines. Each attaches as original
and cast iron heads feature the same outward appearance as the original 1966-1971
heads, except for shape of alternator boss. All components attach the same as
original. Features 170 cc combustion chamber and 2.25" intake and 1.94" exhaust
valve machining. Includes valves, springs, retainers and keepers.
Note: Shipped overweight.
MN2871
MN1983
1966-71
1966-71
aluminum head ............................................ 1839.99 ea
cast iron head ............................................... 1825.99 ea
410
Cylinder Heads
318, 340, 360ci Chrysler
Performer RPM Chrysler heads deliver outstanding performance in non-emission
1967-91 Chrysler 318-340-360ci engines. Designed for non-emission 1968-73 340ci
Chrysler, RPM Chrysler 340 heads have chambers machined .060" for clearance
with early high-compression engines. These heads are capable of 417 horsepower
and 397 ft/lbs. of torque on pump gas with an Edelbrock Performer RPM intake
manifold and matching camshaft. Sold individually.
Important: Not compatible with 1970 340 T/A engine. Bare heads will have valve guides &
seats installed, but will require final sizing and a valve job to match the valves you will be
using. Recommend 14mmx3/4" reach spark plugs with flat gasket seat (Champion RC12YC)
Note: Not legal for sale or use on pollution controlled motor vehicles. Shipped overweight.
No further discounts apply.
Bare Head
E60769
1967-85
E60199
1968-73
Complete Head
E60779
1967-85
E60179
1968-73
Head Bolt Kit
E8555
1967-85
Performer RPM............................................... 619.99 ea
RPM Chrysler 340 .......................................... 719.99 ea
Performer RPM............................................... 769.99 ea
RPM Chrysler 340 .......................................... 779.99 ea
for Edelbrock heads ........................................ 89.99 ea
361, 383, 400ci Chrysler
Performer RPM Chrysler heads deliver outstanding performance in non-emission
1961-79 Chrysler 361-440ci Wedge engines. 210cc intake ports that flow 291 cfm,
70cc exhaust ports that flow 217 cfm at .600" lift. Your choice of 84cc chambers
or 88cc chambers that are machined .100" for clearance with quench dome style
pistons. Angled spark plugs for superior combustion. Sold individually.
Important: Some headers will not clear angled spark plugs. Bare heads will have valve
guides & seats installed, but will require final sizing and a valve job to match the valves you
will be using. Recommend 14mmx3/4" reach spark plugs with flat gasket seat (Champion
RC12YC)
Note: Not legal for sale or use on pollution controlled motor vehicles. Shipped overweight.
No further discounts apply.
Bare Head
E60919
1961-79
E60149
1961-79
Complete Head
E60929
1961-79
E60189
1961-79
Head Bolt Kit
E8591
1961-79
84cc................................................................. 619.99 ea
88cc................................................................. 649.99 ea
84cc................................................................. 779.99 ea
88cc................................................................. 799.99 ea
for Edelbrock heads ........................................ 109.99 ea
Victor Max Wedge Heads
Intake ports are machined to match Max Wedge intake manifolds for RB competition
big-block Chrysler models. Intake ports are raised .650", exhaust ports are raised
.250" for improved flow. The intake flange is extended .950" to eliminate the need
for intake spacer plates. Exhaust flange is extended .300" from stock (same as Mopar
Stage 6) featuring dry exhaust bolt holes with Helicoil® thread inserts. Sold without
springs or retainers; use recommended springs to match your cam.
Note: Offset intake rockers required, exhaust side accepts standard-spec rockers. May
require additional pushrod hole clearancing for some combinations. Bare heads will have
valve guides & seats installed, but will require final sizing and a valve job to match the
valves you will be using. These heads require the use of a 14mm, 3/4" reach, flat gasket spark
plug with a heat range appropriate to your application. Shipped overweight. No further
discounts apply.
Bare Head
E77939
no valves ........................................................................... 699.99 ea
Complete Head
E77949
2.20" intake / 1.81" exhaust valves................................... 781.99 ea
Toll Free Order Line 800.854.1280
Cylinder Head Hardware
E2086
1968-79 Edelbrock Big Block Power Package Top-End Kit
To get great performance out of any engine, the components must work together. Since the early 1980s, the
Edelbrock Total Power Package System has been the solution to the parts matching puzzle for many street
performance enthusiasts. Each power package includes: Intake manifold, camshaft & lifter kit, cylinder heads,
timing chain & gear, head bolt set, intake bolt set and gaskets. Get all of your power package components in one
box with an Edelbrock Power Package Top-End Kit.
Note: Not legal for sale or use on pollution controlled motor vehicles. No further discounts apply.
E2086
E2087
1968-79
1968-79
383ci, 421hp & 417 ft/lbs .......................................................................... 2299.99 kit
440ci, 482hp & 528 ft/lbs .......................................................................... 2249.99 kit
MN2055
Mr. Gasket Ultra-Seal Head Gaskets
Ultra-Seal head gaskets have a 5 layer composite
construction with graphite inner core and steel outer
layers. These multi-layer gaskets transfers heat away
from hot spots preventing gasket burn-out. They
are coated with high temperature silicone to ensure
sealing of engine fluids. Will not indent aluminum
cylinder heads.
.028" Compressed Thickness, 4.140" Bore
MN2053 1967-76 273-360 .................. 24.99 ea
.038" Compressed Thickness, 4.140" Bore
MN2054 1967-76 273-360 .................. 44.99 ea
.038" Compressed Thickness, 4.450" Bore
MN2055 1960-76 361-440 exc. Hemi . 44.99 ea
Mopar Performance
Small Block Head Bolt Set
Set of 20 bolts that fits 318/340/360 “LA” Engines
up to 1992.
MN1991 ................................................. 169.99 set
These cylinder head bolts feature a wide-flanged,
reduced-wrenching hex head to allow you to re-torque
the cylinder head without removing the valve train.
These bolts are rated 180,000 psi and come complete
with hardened parallel-ground washers. For engines
that are serviced quickly and frequently, choose the
premium 8740 alloy stud sets which are rated 200,000
psi and allow quick, accurate alignment of the cylinder
head and gasket. Made in USA.
With Hex Head Bolts or Nuts
273-360 Small Block Engines
MN2088 bolts ..................................... 79.99 set
MN2090 studs ..................................... 124.99 set
318/340/360 Small Block Engines
AR1401 studs W2/W-2 econo ............. 139.99 set
AR1416 bolts W2 or W-2 econo......... 69.99 set
AR1402 studs W5-W7 heads .............. 149.99 set
AR1417 bolts W5-W7 heads .............. 69.99 set
AR1418 bolts Magnum....................... 84.99 set
AR1403 studs Edelbrock RPM heads . 119.99 set
AR1404 studs B1-BA heads................ 144.99 set
383-440 Big Block Engines
MN2089 bolts factory heads................ 89.99 set
MN2089 bolts Edelbrock RPM heads . 89.99 set
MN2091 studs factory heads................ 179.99 set
MN2091 studs Edelbrock RPM heads . 179.99 set
AR1419 bolts Edelbrock Victor heads 94.99 set
AR1409 studs Indy 440 heads............. 179.99 set
AR1420 bolts Indy 440 heads............. 89.99 set
426 Hemi
AR1410 studs 7/16" ............................ 219.99 set
AR1421 bolts 7/16" ............................ 239.99 set
AR1411 studs 1/2" .............................. 219.99 set
With 12-Point Bolts or Nuts
273-360 Small Block Engines
AR1405 studs ..................................... 174.99 set
318/340/360 Small Block Engines
AR1406 studs W2 or W-2 econo......... 179.99 set
AR1407 studs W5-W7 heads .............. 184.99 set
AR1408 studs B1-BA heads................ 184.99 set
383-426 Big Block Engines
AR1412 studs factory heads................ 214.99 set
AR1412 studs Edelbrock RPM heads . 214.99 set
AR1422 bolts factory heads................ 84.99 set
AR1422 bolts Edelbrock RPM heads . 84.99 set
AR1413 studs Indy 440 heads............. 209.99 set
426 Hemi
AR1414 studs 7/16" ............................ 214.99 set
AR1415 studs 1/2" .............................. 274.99 set
5.7L, 6.1L & 6.4L Hemi
AR2401 studs Hemi ............................ 354.99 set
Engine Block to Head Dowel Pins
Mopar Performance
Big Block Head Bolt Set
Set of 34 bolts that fits all big blocks except for Hemi.
MN1990 ................................................. 82.99 set
These steel dowel pins
fit into the deck to align
the cylinder heads during
assembly. These should be
replaced whenever the deck
is surfaced on a block. Comes in a set of 4, one set
required per engine. These may also be used for
the timing cover locating dowels Use 2 dowels per
engine for this purpose. Made from steel.
MN2188 all set of 4 ...........................
6.99 set
Cylinder Head Parts
411
Engines & Components K
MN1986
Mopar Performance Head Gaskets
Thick, 0.040" to 0.042" gaskets can be used for
replacement or competition applications up to 12.5:1
compression ratio. Sold as an engine set.
Small Block
MN1986
up to 4.060" bore .................. 82.99 pr
MN1987
up to 4.100" bore .................. 58.99 pr
Big Block
MN1988
up to 4.380" bore .................. 79.99 pr
MN1989
up to 4.420" bore .................. 72.99 pr
MN2090
Cylinder Head Hardware Sets
Camshaft Sets
Edelbrock Performer Plus Camshaft Kits
MN1999
Mopar Performance Small Block “Purple” Camshaft Sets
All Mopar “Purple Shaft” performance camshafts are designed, developed, dyno
tested and track-tested by engineers for increased power and rpm potential while
maintaining reliability and the best possible low-speed characteristics, including
torque and idle quality. Fits all LA family 273, 318, 340 and 360 engines. Each
package contains the camshaft, instruction sheet, and tappets.
Note: Mopar recommends the use of a high zinc oil for maximum durability for flat tappet
camshafts.
Hydraulic Camshaft Sets
Item #
Adv. Duration
Lift
Overlap Centerline
MN1997 248/256
0.410/0.425
32
110° ...............
MN1998 268/276
0.429/0.444
44
114° ...............
MN1999 260/268
0.430/0.450
44
110° ...............
MN2000 268/272
0.450/0.4455 50
110° ...............
MN2001 238/238
0.474/0.474
60
110° ...............
MN2002 284/284
0.484/0.484
68
108° ...............
MN2003 292/292
0.508/0.508
76
108° ...............
Mechanical Camshaft Sets
Item #
Adv. Duration
Lift
Overlap Centerline
MN2067 284/284
0.528/0.528
60
112° ...............
MN2068 296/296
0.557/0.557
76
110° ...............
MN2069 312/312
0.590/0.590
104
106° ...............
Price
259.99
259.99
259.99
259.99
259.99
259.99
259.99
Designed for optimum torque from the low-end to the mid-range, Performer®-Plus
camshaft packages match with Performer® manifolds for vehicles operating from idle
to 5500 RPM. They are smooth idling cams that provide for a major improvement
in throttle response and torque. All camshafts come with hydraulic lifters, assembly
lube and instructions.
Note: Not legal for sale or use on pollution controlled motor vehicles.
No further discounts apply.
Item #
E2177
E2192
set
set
set
set
set
set
set
Price
269.99 set
269.99 set
269.99 set
Year
Application
1967-84 318, 340, 360
1968-78 383, 400, 440
Duration
270˚/270˚
270˚/280˚
Lift
Price
.420"/.420" ..... 195.99 set
.420"/.442" ..... 224.99 set
Edelbrock Performer RPM Camshaft Kits
Designed for high-performance street applications, Performer® RPM cams provide
power from 1500 to 6500 RPM. These hydraulic lifter camshafts are dyno-matched to
Performer® RPM manifolds for high RPM horsepower while maintaining acceptable
low-end torque. With 10-12 inches of manifold vacuum at idle, Performer® RPM
cams have more lift and duration than most street camshafts.
Note: Not legal for sale or use on pollution controlled motor vehicles.
No further discounts apply.
Item #
E7177
E7194
Year
Application
1967-84 318, 340, 360
1968-78 383, 400, 440
Duration
308˚/318˚
300˚/308˚
Lift
Price
.488"/.510" ..... 264.99 set
.480"/.495" ..... 289.99 set
MN2004
Mopar Performance Big Block Purple Shaft Camshaft Kits
All Mopar Purple Shaft performance camshafts are designed, developed, dyno’d and
track-tested by engineers for increased power and rpm potential while maintaining
reliability and the best possible low-speed characteristics, including torque and idle
quality. Big Block models included are Chrysler B/RB (361, 383, 400, 413, 426
Wedge and 440). These Purple Shaft cams offer the best horsepower-to-dollar-spent
value. Each package contains the camshaft, instruction sheet, and tappets. Hydraulic
camshafts use a 1 bolt design and Mechanical camshafts use a 3 bolt design.
Engines & Components
Note: Mopar recommends the use of a high zinc oil for maximum durability for flat tappet
camshafts.
Hydraulic Camshaft Sets
Item #
Adv. Duration
Lift
Overlap Centerline
Price
MN2004 268/284
0.450/0.458
46
115° ............... 249.99
MN2005 272/272
0.455/0.455
48
112° ............... 249.99
MN2006 280/280
0.474/0.474
60
110° ............... 249.99
MN2007 284/284
0.484/0.484
68
108° ............... 249.99
MN2008 292/292
0.509/0.509
76
108° ............... 409.99
MN2013 241/241
0.484/0.475
N/A
106° ............... 269.99
MN2014 241/241
0.484/0.475
N/A
106° ............... 249.99
Mechanical Camshaft Sets
Item #
Adv. Duration
Lift
Overlap Centerline
Price
MN2009 284/284
0.528/0.528
60
112° ............... 259.99
MN2010 296/296
0.557/0.557
76
110° ............... 279.99
MN2011 312/312
0.590/0.590
104
106° ............... 249.99
MN2012 324/324
0.620/0.620
112
106° ............... 259.99
Note: Not legal for sale or use on pollution controlled motor vehicles.
No further discounts apply.
Item #
E2206
Year
Application
1968-78 383, 400, 440
Duration
240˚/248˚
Lift
Price
.540"/.545" ..... 339.99 ea
set
set
set
set
set
set
set
set
set
set
set
Camshaft Bolt Set
This set includes a replacement bolt and
special washer for attaching the camshaft
sprocket to the camshaft. This strong, grade
8 unique washer and bolt fit all years and all
engines with single bolt sprocket.
Note: Will not work with 3 bolt cams.
K
Edelbrock Rollin' Thunder Performer Plus Camshafts
Designed for street high-performance applications, Performer® RPM cams provide
power from 1500 to 5500 RPM. These hydraulic roller lifter camshafts reduce
friction, virtually eliminate break-in problems and permit higher valve velocities
for increased performance. Intended for use with OEM or Edelbrock hydraulic
roller lifters sold separately.
MN2414
all ....................................................................................... 15.99 set
412
Camshaft Sets
MN2120
MN2121
Camshaft Thrust Buttons
Camshaft thrust buttons ride between
the front of the timing gear and the
back of the timing cover. They can be
shimmed to achieve proper end play.
These come in either steel roller bearing
style button or nylon thrust button.
These fit 1960-76 383-440 and 1966-71
426 Hemi with 3-bolt cam gears.
MN2120 .715" roller style . 23.99 ea
MN2121 .735" nylon style . 11.99 ea
MN2123
Camshaft Wear Plate
This wear plate bolts to the front of the
block and regulates the cam thrust in
the engine. Made from steel and moly
coated to last with a bearing thickness of
0.30". This item always wears-out and
should be changed whenever replacing
the cam or rebuilding the engine.
MN2123 big block ............. 15.99 ea
Toll Free Order Line 800.854.1280
Your Choice of Four Convenient Sets to Meets Your Specific Needs!
Important: On small block applications, High Energy™ Cams may be used with stock valve
springs and lifters. However these components must be in good operating condition. In order to
protect your camshaft warranty and for maximum performance benefit, we recommend replacing
stock valve springs and lifters with a high performance set from Classic Industries.
A - Camshaft Only
B - Cam and Lifters
C - Small Set
D - Complete Set
The camshaft only set includes camshaft.
instructions, assembly lube and decals
Order the cam and lifter set to add a
matched set of lifters to your camshaft
Order the small set for cam and
lifter set plus timing chain and gear
Complete set includes cam, lifters,
timing chain & gear valve springs and
retainers, valve locks, valve stem seals
High Energy™ Hydraulic Cams for Your Mopar Daily Driver!
All High Energy™ designs are totally streetable hydraulic cams. They will produce
10 to 30% more power than a stock cam throughout the RPM range. Each cam has
a particular RPM range in which it works best. By selecting the cam that best suits
your driving needs, exceptional power increases can be expected. High Energy™ Cams
work great for everyday driving without the “bad” side effects normally found with
Item #
202082
202102
202122
212124
212134
212154
Application
273-360 ci
273-360 ci
273-360 ci
383-440 ci
383-440 ci
383-440 ci
RPM Range
800-4800
1200-5200
1500-5500
800-4800
1000-5000
1200-5200
Adv Dur
252˚/252˚
260˚/260˚
268˚/268˚
252˚/252˚
260˚/260˚
268˚/268˚
Lift
.425"
.440"
.454"
.425"
.440"
.454"
other hydraulic cams. High Energy™ cams produce more power, are more efficient
and do not affect the engine’s idle characteristics to the point of making your car
undriveable. High Energy™ Cams will not affect any vacuum or power accessories
such as power brakes, air conditioning or steering. A variety of cams and kits are
available for small block and big block applications.
A - Camshaft
114.99 ea
114.99 ea
114.99 ea
139.99 ea
139.99 ea
139.99 ea
B - Cam & Lifters
189.99 set
189.99 set
189.99 set
209.99 set
209.99 set
209.99 set
C - Small Set
219.99 set
219.99 set
219.99 set
244.99 set
244.99 set
244.99 set
D - Complete Set
344.99 set
344.99 set
349.99 set
389.99 set
389.99 set
389.99 set
Magnum™ Hydraulic Cams for High Performance Mopar Engines!
The Magnum™ Cam is a great cam for high performance driving in street
machines. Provides 30-70% more horsepower and a rough and ready to rumble
idle in small block or big block Mopar applications. The Magnum™ will not
affect power accessories, but should be used with headers and a change in rear
end gear ratios. This is the perfect hydraulic cam for cruising. Important: Vendor
cause damage when used with these camshafts. Complete sets include valve springs.
* Needs 90116 valve springs if not purchasing the complete set.
** Needs 99516 valve springs if not purchasing the complete set. Heads must be machined
*** Needs 91116 valve springs if not purchasing the complete set.
**** Needs 92416 valve springs if not purchasing the complete set. Heads must be machined
states that engine must use recommended valve springs. Use of stock valve springs could
RPM Range
1800-5800
2500-6000
3000-6500
1800-5500
2500-5800
3000-6200
3500-6500
Adv Dur
270˚/270˚
280˚/280˚
292˚/292˚
270˚/270˚
280˚/280˚
292˚/292˚
305˚/305˚
Lift
.470"
.480"
.501"
.470"
.480"
.501"
.525"
A - Camshaft
139.99 ea
139.99 ea
139.99 ea
139.99 ea
139.99 ea
139.99 ea
139.99 ea
B - Cam & Lifters
209.99 set
209.99 set
209.99 set
209.99 set
209.99 set
209.99 set
209.99 set
C - Small Set
249.99 set
254.99 set
254.99 set
254.99 set
254.99 set
254.99 set
254.99 set
D - Complete Set
409.99 set
409.99 set
459.99 set
439.99 set
439.99 set
469.99 set
469.99 set
Xtreme Energy™ Hydraulic Cams for Street/Strip Mopar Engines!
Xtreme Energy™ Cams are Comp Cams® newest series of hydraulic cams.
They are designed to take advantage of the latest improvements in valve train
components and the newest developments in camshaft design. Xtreme Cams can
be used in any street or street/strip application where both throttle response and
top end horsepower are desired. Increases horsepower from 20-70% over stock.
Item #
202203*
202213*
202223*
202233*
212204**
212214**
212224***
212234***
Application
273-360 ci
273-360 ci
273-360 ci
273-360 ci
383-440 ci
383-440 ci
383-440 ci
383-440 ci
RPM Range
800-4800
1000-5200
1300-5600
1600-5800
600-4800
1000-5200
1300-5600
1600-5800
Adv Dur
250˚/ 260˚
256˚/ 268˚
262˚/ 270˚
268˚/ 280˚
250˚/ 260˚
256˚/ 268˚
262˚/ 270˚
268˚/ 280˚
Lift
.432", .444"
.447", .455"
.462", .470"
.477", .480"
.432", .444"
.447", .455"
.462", .470"
.477", .480"
Important: Vendor states that engine must use recommended valve springs. Use of stock
valve springs could cause damage when used with these camshafts. Complete sets include
valve springs.
* Needs 90116 valve springs if not purchasing the complete set.
** Needs 92616 valve springs if not purchasing the complete set.
*** Needs 91116 valve springs if not purchasing the complete set
A - Camshaft
129.99 ea
129.99 ea
129.99 ea
129.99 ea
139.99 ea
139.99 ea
139.99 ea
139.99 ea
B - Cam & Lifters
199.99 set
199.99 set
199.99 set
199.99 set
209.99 set
209.99 set
209.99 set
209.99 set
C - Small Set
229.99 set
229.99 set
229.99 set
229.99 set
244.99 set
254.99 set
254.99 set
254.99 set
D - Complete Set
359.99 set
359.99 set
359.99 set
359.99 set
389.99 set
439.99 set
439.99 set
439.99 set
Comp Cams
413
Engines & Components K
Item #
Application
202144*
273-360 ci
202324*
273-360 ci
202434**
273-360 ci
213064*** 383-440 ci
212374*** 383-440 ci
212424**** 383-440 ci
212434**** 383-440 ci
Valve Covers
MN1038
MN2528
1964-76 OE-Style Valve Covers
Correct reproduction valve covers for 1964-76 models
with small or big block engines. These valve covers
are manufactured to original specifications and feature
a quality fit. All valve covers are unpainted except
where chrome finish is noted.
Note: *1971 models through 12/1970 used 1970-style valve
covers.
Small Block
Unpainted Valve Covers
MN2528 1970
340 6 bbl ................. 179.99
MN2527 1970-71 except 340 6 bbl ..... 179.99
MN2529 1972-76 all ............................ 179.99
Big Block
Unpainted Valve Covers
MN2530 1964
426 Max Wedge...... 179.99
MN2531 1964-65 361, 383 & 413 ....... 179.99
MN2533 1966-67 361, 383 & 440 ....... 179.99
MN2535 1968
383 & 440 Hi-Po .... 179.99
MN2536 1969
all ............................ 179.99
MN2537* 1970
all ............................ 179.99
MN2538 1971-76 all ............................ 179.99
Chrome Valve Covers
MN2532 1964-65 426 Wedge .............. 299.99
MN2534 1967
440 Hi-Po ............... 299.99
MN2534 1967-68 383 for A-Body ...... 299.99
pr
pr
pr
OEM Black 426 Hemi Valve Cover Set
Mopar Performance takes another giant step to help
the restoration crowd with the introduction of these
OE black wrinkle 426 Hemi valve covers. Original
equipment for all 1966 thru 1969 426 Hemi engines,
these stamped steel black wrinkle covers have the spark
plug wire brackets and rubber coated alternator wiring
looms. The set includes left and right valve covers,
chrome breather caps, metal PCV valve, chrome PCV
cap, two gaskets and hold down studs and nuts.
MN1042 1966-69 Hemi.................. 929.99 set
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
MN1035
Mopar Performance Valve Covers
These valve covers are perfect for that show-car
look and feature the Mopar Performance logo. Cast
aluminum covers are more rigid than stamped valve
covers and help prevent valve cover leaks. Set includes
two valve covers and oil filler caps (does not include
bolts or gaskets unless noted).
Note: The as cast aluminum valve covers required the PCV
and breather cap holes must be machined open.
Polished Cast Aluminum - “Mopar Performance”
MN1035 small block .............................. 199.99 pr
MN1036 big block .................................. 199.99 pr
Black Cast Aluminum - “Mopar Performance”
MN1037 small block .............................. 159.99 pr
MN1038 big block .................................. 159.99 pr
As Cast Aluminum - “Mopar Performance”
MN2028 small block, gaskets & bolts ... 139.99 pr
MN2030 big block, inc. gaskets & bolts 139.99 pr
Chrome - Pentastar Logo
MN1039 small block .............................. 229.99 pr
Chrome Stamped Steel - Pentastar Logo
MN1040 big block, inc. gaskets ............. 89.99 pr
Mopar Performance Hemi Valve Covers
1966 and later street Mopar Performance Hemi valve
covers. Painted black wrinkle and finned with Hemi
logo cast in. For single-plug cylinder head applications.
Uses Street Hemi valve cover rail. Gaskets included.
Takes MN2035 oil cap.
MN2031 ............................................... 1089.99 set
K
Engines & Components
Direct Connection
Small Block Chrome Valve Covers
Mopar Performance Cast Aluminum
Valve Cover Baffle and Screw Set
Mopar Performance cast aluminum valve cover baffle
and screw set for cast aluminum Mopar Performance
valve covers. Protects the oil breather or fill cap from
being splashed with oil, which can cause leaks.
Note: For cast aluminum valve covers only.
MN2032
cast alum. valve covers ........
9.99 set
Dress up your engine compartment with these highquality, chrome-plated replacement stamped steel valve
covers with Direct Connection logo. Set includes two
valve covers and grommets. These are stamped from
brand new tooling to ensure sealing around the cylinder
heads. Does not include gaskets, screws or baffling.
MN2027 small block ............................ 80.99 set
T9299
Chrome Small & Big-Block Valve Covers
Chrome valve covers for all small and big block
Chrysler engines, excluding Hemi. All are chromed
and baffled. Use 1/4"-20 fasteners. 5 required per
cover for small block, 6 required per cover for big
block; sold separately.
Note: Not legal for sale or use in California on pollution
controlled motor vehicles.
Mopar Magnum Small Block Valve Covers
Cast aluminum valve covers with a black wrinkle
finish and the Mopar Magnum logo.
MN2029 small block ........................... 229.99 set
414
Valve Covers
Small Block Valve Covers
Fits 273, 340 and 360 for 64-73 and 318 engines 1967
and up. 1 year manufacturer’s warranty.
T9298
Chrome baffled ......................... 49.99 pr
Big Block Chrysler Valve Covers
Fits 383, 413, 426 wedge and 440 (excluding Hemi).1
year manufacturer’s warranty.
T9299
Chrome baffled ......................... 49.99 pr
Elite Series Aluminum Valve Covers
These heavy gauge die-cast aluminum valve covers
have a polished finish for a custom look. The raised
fins are accented by a black matte background, then
detailed with Allen hex heads that create a two-piece
look in a one-piece valve cover. These high profile
(3-13/16" tall) valve covers are designed to clear roller
rockers and valvetrain components.
Note: For small block only. No further
discounts apply.
E4295
1965-76
318-360 ............. 154.99 pr
Toll Free Order Line 800.854.1280
Valve Covers
E41763
E41923
MN2139
Classic Aluminum Valve Covers
Edelbrock first made these valve covers in the late
1950’s and they’re still in style. Made of heavy gauge
sand-cast aluminum, these valve covers are designed
to clear roller rockers. Available in polished or black
powdercoated finish.
Note: No further discounts apply.
Small Block 3-3/4" tall
E4176
polished ..................................
E41763 black .......................................
Big Block 4" tall
E4192
polished ..................................
E41923 black .......................................
249.99 pr
239.99 pr
249.99 pr
239.99 pr
Moroso Fabricated Aluminum
Small Block Valve Covers
Moroso fabricated aluminum small block valve covers.
Fabricated entirely from one piece of quality aluminum
that makes them ultra lightweight. One piece billet
rail is 3-3/4" tall that is CNC machined to ensure a
precision flat surface for superior sealing that allows
the engine to pull greater vacuum for improved ring
seal and power. Tall enough to clear most rocker
combinations. Fasteners are included.
MN2138 w/o breather............................ 454.99 pr
MN2139 w/breather on one side ........... 469.99 pr
Accessories
MN2140 PCV grommet .095" ...............
4.99 pr
MN2141 PCV grommet/baffle .095" .....
3.59 ea
MN2142 breather grommet/baffle .095" 4.99 ea
Fabricated Aluminum Big Block Valve Covers
These fabricated aluminum valve covers are fully
TIG-welded from sheet aluminum. After the covers
are welded, the entire flange is milled to guarantee
a flat, straight surface. These covers are designed to
allow you to position the breathers or oil caps exactly
where you need them with a simple hole saw or punch.
Reduced head diameter valve cover bolts or studs are
recommended. Made in USA.
Note: Powder coating or polishing recommended for
removal of minor surface imperfections.
MN2423
big block .............................. 189.99 pr
E4495
1960-76 Signature Series Valve Covers
These quality baffled valve covers accept all emissions
equipment, including PCV valve. Rubber grommets
for the breather and PCV holes are included. Matching
breathers are sold separately. Available in chrome or
black powdercoated finish.
Important: Tall valve covers clear most roller rockers and
valvetrain components except stud girdles.
Note: No further discounts apply.
Small Block
E4495
1965-76
E4473
1965-76
Big Block
E4491
1960-76
E4493
1960-76
tall profile, chrome .. 45.99 pr
tall profile, black...... 49.99 pr
tall profile, chrome .. 49.99 pr
tall profile, black...... 52.99 pr
Polished Cast Big Block Valve Covers
MN2143
Moroso Fabricated Aluminum
426 Hemi Valve Covers
Fully polished cast aluminum valve covers give your
engine a sleek, modern look. Designed for aftermarket
cylinder heads with 90º valve cover holes. Sold as a
pair. Made in USA.
Note: Modification may be necessary to mount these valve
covers to original heads and is not recommended.
MN2424
big block .............................. 139.99 pr
Moroso fabricated aluminum 426 Hemi valve covers.
Fabricated entirely from superior quality aluminum
that makes them ultra lightweight. One piece billet
rail that is CNC machined to ensure a precision flat
surface for superior sealing.
MN2143 426 Hemi ................................ 809.99 pr
MN2524
Fabricated Aluminum Racing Valve Covers
Update and dress your engine compartment with these
beautiful fabricated aluminum valve covers, with rail.
Get the a modern look at the price of yesteryear.
MN2523 small block .......................... 159.99 pr
MN2524 big block .............................. 169.99 pr
Small Block Engine Dress Up Kit
These dress up kits for small block engines include:
2 baffled chrome valve covers, 10 mini hold down
tabs, 10 wing nuts for valve covers, 2 chrome push-in
breather caps, 2 breather grommets and 2 valve cover
gaskets. Covered by a 1 year manufacturer’s warranty.
T3050
engine dress up kit................... 114.99 kit
Valve Covers
415
Engines & Components K
MN2137
Moroso Tall Chrome Valve Covers
Moroso chrome valve covers are a classic design that
will take you back to when muscle cars ruled the road.
The Moroso name is stamped into the top of the valve
covers and include 2 breather/filler cap grommets. Tall
design with baffles. Made from stamped steel.
Small Block and W2 Heads
MN2136 ................................................ 61.99 pr
Big Block
MN2137 ................................................ 79.99 pr
Valve Cover Components
MN2036
MN2072
Mr. Gasket Ultra-Seal Valve Cover Gaskets
MN1046
Mopar Performance Valve Cover Gaskets
Mopar Performance valve cover gaskets for small
block and big block applications. New gaskets are
recommended when removing or replacing your
valve covers.
Small Block Engines
MN2036 1964-91 LA small block ........ 27.99 pr
MN2037 1992-03 Magnum .................. 25.99 pr
Hemi Engines
MN1046 1966-71 Hemi ........................ 49.99 pr
Mr. Gasket performance valve cover gaskets.
Manufactured from high-density cork/rubber blend
gasket material that has a black latex rubber coating
applied to the outside of the gasket to help seal minor
flange irregularities and eliminate the possibility of
oil leakage. These are 3/16" thick. New gaskets are a
must when removing or replacing your valve covers.
Made for OE replacement, high performance, street,
drag race and oval track use.
MN2072 1964-76 273-360 .................. 24.99 pr
MN2074 1963-76 361-440 exc. Hemi . 24.99 pr
Mopar Performance Oil Filler Cap
Mopar Performance valve cover screw in oil filler cap
for Mopar cast aluminum valve covers.
MN2035 ................................................... 21.99 ea
ST10072
ST10066
Replacement Oil Caps
High quality Stant service replacement oil caps in a
variety of styles for small block and big block engines.
Push-In Style for 1.25" Hole
ST10072 OIL ........................................ 3.99 ea
Twist-on Style with Tabs
ST10066 with ears ................................. 3.99 ea
MN1048
T4993
E4204
T9067
Valve Cover Hardware Sets
MN1055
1964-76 Fel-Pro Valve Cover Gaskets
K
Engines & Components
Replacement valve cover gaskets for 1964-76 Mopar
models with small block, big block or Hemi engines.
Each gasket will fit and function as original to prevent
oil from escaping through the valve cover.
Small Block
MN1055 1964-76 Fel-Pro ..................... 14.99 pr
Big Block
MN1056 1964-76 Fel-Pro ..................... 14.99 pr
426 Hemi
MN1057 1966-71 Fel-Pro ..................... 21.99 pr
MN2066
Mr. Gasket
Performance Valve Cover Gaskets
Mr. Gasket performance valve cover gaskets.
Manufactured from high-density cork/rubber blend
gasket material that is 3/16" thick and provides
excellent sealing and durability. New gaskets are a
must when removing or replacing your valve covers.
Made for OE replacement, high performance, street,
drag race and oval track use.
MN2066 1964-76 273-360 .................. 19.99 pr
MN2073 1963-76 361-440 exc. Hemi . 15.99 pr
MD2320 1964-65 Hemi....................... 39.99 pr
416
Valve Cover Gaskets
Finish off your valve covers with these valve cover
fastener sets. Hemi hardware set includes studs and
nuts, while others include bolts. Other items included
where stated.
426 Hemi Valve Cover Set
A complete set of 20 studs and nuts to fit 1966-71 426
Hemi heads to retain factory valve covers. For use
with all stamped sheet metal covers. Nuts available
individually.
MN1044 nut only .................................... 2.99 ea
Valve Cover Accessory Set
Contains 12 chrome plated screw and washer
assemblies, 1 chrome plated oil filler cap and 2 rubber
grommets.
MN1048 accessory kit ............................. 21.99 set
Chrome Valve Cover Bolt Set
Includes 4 bolts and 4 washers. Need 3 sets for 1 pair
of valve covers.
AK131A 1⁄4-20, 1" long .......................... 12.99 set
Valve Cover Spreader Set
Includes 4 chrome 4-1⁄2" wide spreader bars. Use two
sets for V8 engines.
T4993
4 spreaders................................ 5.99 set
Valve Cover Washer Set
Designed for stamped steel valve covers only. Set
includes 12 chrome washers for 2 valve covers.
MN1508 except Hemi ............................. 11.99 set
Chrome Hold Down Set
Set includes 4 hold down washers. For all engines
except Hemi.
Note: Need 3 sets for 2 valve covers.
T9067
set of 4 ......................................
5.99 set
E4405
Edelbrock Valve Cover Breathers
Elite Series
Elite series breathers are die-cast aluminum with a
foam element. Available in 3 styles. Side mount and
top mount breathers require drilling
for installation.
Note: No further discounts apply.
E4204
E4214
E4201
E4211
E4202
push-in style w/logo ................ 15.99 ea
push-in style w/o logo ............. 24.99 ea
90º side mount w/logo............. 21.99 ea
90º side mount w/o logo.......... 21.99 ea
30º top mount w/logo .............. 24.99 ea
Signature Series
Signature Series inscribed breathers come with rubber
grommets and match Signature Series chrome valve
covers. Fit any 1-1/4" hole.
Note: No further discounts apply.
E4403
E4405
E4410
black
chrome
chrome
w/o nipple...............
w/o nipple...............
w/90º nipple ...........
9.99 ea
7.99 ea
7.99 ea
Toll Free Order Line 800.854.1280
Valve Cover Components
1964-69 Street Hemi
Push-On Breather
Signature Series Oil Fill Cap
Oil plugs feature recessed Edelbrock script and are
designed to plug the oil fill hole on any of Edelbrock’s
Signature Series valve covers or any 1-1/4" diameter
fill hole on similar designs. Chrome
finish.
Note: No further discounts apply.
E4415
1-1/4" hole ................................. 7.99 ea
1970-76 Oil Filler Cap
Replacement chrome style oil cap, originally equipped
on many Mopar engines from 1970-76.
T4804
1970-76 ..................................... 5.99 ea
Mopar Performance
Valve Cover Chrome
Breather Cap
Mopar Performance
valve cover chrome
breather cap for Mopar
cast aluminum valve
covers to fill extra valve
cover holes.
MN2033 ..................................................
Factory reissue of the push
on breather used on 1964-69
426 Hemi models. It will fit
all production style Hemi
valve covers including Mopar
Performance parts, chrome or
black krinkle.
MN1053 1964-69 push-on breather..... 69.99 ea
A-Body Hemi Superstock Breather
Reproduction breather cap
for 1969 A-Body models
fitted with Hemi Superstock
engine. Designed and
manufactured to factory
specifications, each comes
in the correct gray color
for a truly authentic
appearance. Sold as a pair.
MD2326 1969 Dart, Barracuda........ 101.99 pr
T4998
Various valve cover grommets for 1961-76 models
with small or big block engines.
Breather Cap Grommet
MN1054 1962-76 all engines .............. 4.99 ea
PCV Valve Grommet
MN1051 1961-74 1⁄2" all .................... 4.99 ea
T4998
1961-74 3⁄4" ID x 1⁄4" OD ... 1.99 ea
Big Block Valve Cover Grommet Set
Set of grommets for cast aluminum big block valve
covers, except Hemi. Includes grommets for both
valve covers.
MN1050 1961-74 grommet set ............. 9.99 set
OEM Style
Push-In Breather Cap
OEM chrome design. Fits valve
covers with 1.25" diameter
holes.
T9169
1.25"
push-in .....................
6.99 ea
1964-69 426 Hemi PCV Package Set
9.99 ea
MN1051
1961-76 Valve Cover Grommets
Factory reissue ser contains one PCV cap, a PCV valve
and nut and one PCV valve retaining spring. Also, can
be used to service 60’s era push on style PCV valves
other than Hemi.
MN1052 1964-69 PCV package set...... 99.99 set
Mopar Performance Valve Stem Seals
1967 and later small block and 1965 and later big block
except Hemi. Made of high-temp Viton material, these
Valve Seals feature a full or semi- umbrella shape
for best dual-purpose use. Helps prevent oil seepage
down valve guides. Not recommended for use with
dual valve springs. Sold in sets of 16.
MN1992 .................................................. 18.99 set
OE-Style
Replacement PCV Valves
Reproduction PCV valve for
various Mopar models.
Mopar Performance valve cover bolt-on breather cap
for Mopar cast aluminum valve covers. This breather
includes the gasket.
MN2034 .............................................. 169.99 ea
Note: *For models with
steel valve covers.
MD2322
Black Phosphate lower with Plastic Top
MD2321* 1970-71 BB, w/grommet ....... 39.99 ea
MD2322* 1970-74 SB , w/grommet ...... 31.99 set
Aftermarket PCV Valve
PCV180 1962-69 6, 8 cylinder ............. 2.99 ea
OE-Style Chrome Hemi Valve Cover Breather
Valve cover breather for the
1966 Hemi with clean air
package and all 196769 high performance
340, 338, 440 and
Hemi engines. Made
to the OE dimensions,
features high quality
chrome finish with the
correct internal screen
mesh filter and proper
“OIL” lettering on top.
MD2325 1966-69 chrome ..................... 85.99 ea
MD2323
PCV Valve And Breather Grommet Set
Licensed reproduction PCV valve and breather
grommets. For steel valve covers only. Features all
correct markings as original.
MD2323 1970-71 big block & Hemi .... 16.99 set
MD2324 1970-74 small block .............. 14.99 set
MN2075
Mr. Gasket
Valve Cover Baffle
Mr. Gasket valve cover plugs and grommets fit
aftermarket stamped steel and aluminum valve covers.
Made from neoprene to ensure a positive seal. The
baffled grommet is special and replaces the stock
grommet and it is designed to eliminate blow-by from
non-baffled valve covers and will not work with stud
girdles. Measure your valve cover inlet for accurate fit.
T9359
1 1/4" baffled ........................... 2.99 pr
Valve Cover Plug
Utility plug manufactured in
rubber for use on valve covers
with 1.25" diameter holes. Will
plug up the opening hole when
not using PCV or Oil filler cap .
G7229
................................................... 1.99 ea
Valve Cover Parts
417
Engines & Components K
Mopar Performance
Valve Cover Bolt-On Breather Cap
Edelbrock Intake Manifolds
E91239
E2176
E2475
E3010
Edelbrock Performer Family Intakes
Edelbrock Performer intakes are dual-plane intakes designed for street engines and are
either stock replacement or street legal upgrades for your Mopar small or big-block
engine. Performer intakes are best from idle to 5500RPM while
Performer RPM and RPM Air-Gap intakes are best from 1500RPM
to 6500RPM. Note: No further discounts apply to all Performer Intakes
Edelbrock Performer Intakes
318, 340, 360
Designed for street 318-340-360ci Chrysler V8s. E2176 is stock replacement/street
legal part for 1966-72 V8s (and 1973 non-CA models) with OEM 4-bbl. carburetor
except models equipped with EGR. E3776 is stock replacement/street legal part for
1972-87 small block engines with OEM 4-bbl. carb.
E2176
318-360 non-EGR
natural finish ....................... 234.99 ea
E3776
318-360 w/EGR
natural finish ....................... 259.99 ea
361, 383, 400
Designed for blocks that measure 7.75" across. For EGR, #E2186 is stock replacement/
street legal part for 1972-78 model 400 V8s with OEM 4-bbl. carb. For non-EGR,
#E2186 is stock replacement/street legal part for 1966-72 model engines with OEM
4-bbl. carb. (1973 non-CA); except stock equipped EGR.
E2186
361-400 EGR/non-EGR natural finish ....................... 234.99 ea
413, 426, 440
Designed for blocks that measure 8.75" across. For EGR, #E2191 is stock replacement/
street legal part for 1972-79 440 V8s with OEM 4-bbl. carb. For non-EGR, #E2191
is stock replacement/street legal part for 1966-72 413, 426 (Wedge), 440 V8s with
OEM 4-bbl. carb. (1973 non-CA); except stock equipped EGR. Will not fit 196264 Max Wedge heads.
E2191
413-440 EGR/non-EGR natural finish ....................... 204.99 ea
Edelbrock Performer RPM Intakes
K
Engines & Components
Note: Not legal for sale or use on pollution controlled motor vehicles.
318, 340, 360
Designed for 340-360ci Chrysler V8s and 318ci engines with 340-360 cylinder
heads, use of the latest technology in their dual-plane design results in both excellent
low-rpm torque and outstanding high-rpm horsepower. Recommended for highperformance street and strip applications. Accepts 1975 and earlier water neck only.
Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum
engines. Match with Performer heads #E60779 for maximum performance.
E7176
340-360 non-EGR
natural finish ....................... 264.99 ea
361, 383, 400
Designed for 361-383-400ci Chrysler engines. Dual-plane design results in excellent
low-end torque and high-rpm power. High flow runner design will handle the popular
stroker combinations. For high-performance street/strip applications. Will not fit
1962-64 Max Wedge heads.
E7186
361-400 non-EGR
natural finish ....................... 259.99 ea
413, 426, 440
Designed for 413-426-440ci Chrysler V8s. Dual-plane design results in excellent
low-rpm torque and outstanding high-rpm horsepower. For high-performance street/
strip applications. Will not fit 1962-64 Max Wedge heads.
E7193
413-440 non-EGR
natural finish ....................... 224.99 ea
Edelbrock Performer RPM Air-Gap Intakes
Note: Not legal for sale or use on pollution controlled motor vehicles.
318, 340, 360
Designed for 340-360ci Chrysler V8s and 318ci engines with 340-360 cylinder
head. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later
Magnum engines. Includes nitrous bosses. No provision for exhaust heated chokes
and no exhaust crossover.
E7576
340-360 non-EGR
natural finish ....................... 279.99 ea
E75764
340-360 non-EGR
Endurashine finish .............. 374.99 ea
E75763
340-360 non-EGR
black powdercoated finish .. 389.99 ea
5.7L Hemi
Fits new 5.7 Hemi engine. Dual-Quad intake provides nostalgic look with modern
power. Must be used in conjunction with Timing Control Module, sold separately.
E7528
5.7L
HEMI
natural finish ....................... 374.99 ea
E75284
5.7L
HEMI
Endurashine finish .............. 449.99 ea
418
Intake Manifolds
Edelbrock Torker Family Intakes
E7276
Torker family intakes offer the same performance as Performer intakes, but with
Edelbrock's patented Air-Gap technology. Ideal output from
1500-6500RPM.
Note: No further discounts apply to all Torker Intakes.
Edelbrock Torker 383
361, 383, 400
Designed for blocks that measure 7.75" across. Great for street high-performance
engines operating between 2500 and 6500 rpm where low-end torque is not a
requirement.
Note: 50-state legal.
E3010
361-400 non-EGR
natural finish ....................... 259.99 ea
Edelbrock Torker II
318, 340, 360
Designed for high performance street Chrysler small blocks. Can be used on 318
if 340-360ci cylinder heads are used. Will not fit 1992 and later Magnum engines.
Note: Not legal for sale or use on pollution controlled motor vehicles.
E5076
340-360 non-EGR
natural finish ....................... 249.99 ea
413, 426, 440
Designed for street Chrysler big blocks that measure 8.75" across block. Will not
fit 1962-64 Max Wedge heads.
Note: Not legal for sale or use on pollution controlled motor vehicles.
E5091
413-440
non-EGR
natural finish ....................... 229.99 ea
Edelbrock OEM Replacement Multi-Carburetor Intakes
Edelbrock replacement multi-carburetor intakes feature an open air space that
separates the runners from the hot engine oil for a cooler, denser
air charge, resulting in more power.
Note: No further discounts apply.
Edelbrock CH-28 Dual Quad
413, 426, 440
Designed for Chrysler big blocks that measure 8.75" across block. Will not fit
1962-64 Max Wedge heads. Carb center to carb center: 6-7/16".
Note: Not legal for sale or use on pollution controlled motor vehicles.
E5440
413-440 non-EGR
natural finish ....................... 329.99 ea
Edelbrock CH-6B Six Pack
413, 426, 440
Designed for 440ci Chrysler engines with 3x2-bbl. carbs, also fits 413 and 426
Wedge. #E2475 is stock replacement/street legal part for 1968-71 model 440 V8s
with OEM 3x2-bbl. carbs. This manifold was used on Chrysler 440 Six-Pack engines.
Will not fit 1962-64 Max Wedge heads.
Note: 50-state legal.
E2475
413-440
natural finish .................................................... 354.99 ea
Edelbrock Intake Manifold Gaskets
Matched to Edelbrock Performer and Performer RPM cylinder heads and manifolds,
Edelbrock intake gaskets allow for optimum flow and performance. The new MP-2N
Micropore® technology does not use solvents making our gaskets environmentally
friendly. Impervious to most chemicals, this synthetic fiber composite provides a
high recovery under load. This means that when compressed, the gasket will conform
to any imperfections on the sealing surface even using lower flange pressures. A
nitrile bead around each port opening makes the seal even better.
Note: *Must be used with OE style valley pan. No further discounts apply.
318, 340, 360ci
E7276
1966-87 intake manifold gaskets ................................... 14.99 ea
361, 383, 400, 413, 426 (exc. Hemi), 440ci
E7225*
1958-79 intake manifold gaskets ................................... 16.99 ea
Ignition Control Module
For use with Intake manifold #E7528 or #E75284.
Note: No further discounts apply.
E91239
5.7L
Hemi ............................................................. 1149.99 ea
Toll Free Order Line 800.854.1280
Intake Manifold Components
Temperature Sending Unit
The temperature sending unit screws into the side
of the cylinder block or on the intake manifold and
allows the temperature gauge or warning light to
operate properly. Applications are available to fit most
1963-76 A-body, B-body and E-body vehicles with or
without AC.
2426458 1968-76
with AC ..........................................................
2426458 1963-76
without AC .....................................................
8.99 ea
8.99 ea
MN2420
Big Block Valley Pans with Dimple
These valley pans are designed for “RB” and “B” engines and include a clearance
well, or dimple, that will clear exhaust crossovers found in many dual plane intake
manifolds. “Lips” along the side fit underneath the edge of the cylinder heads,
making a tight seal and allowing the use of standard intake port gaskets. This pan
works well with the standard Edelbrock performer and Performer RPM intake.
Works great with Edelbrock RPM cylinder heads and other aftermarket heads with
an unbroken deck surface where the cylinder head meets the edge of the valley
pan. These pans may be used with factory cylinder heads, depending on the intake
manifold, if any break in the lower deck surface is filled with silicone. Finished in
gold iridite finish for corrosion resistance. Made in USA.
Important: Will not work with original cast iron intake.
Note: Because this pan fits under intake face edges, at least one cylinder head must be
removed in order to install or remove valley pan.
1966-71 Hemi Air Cleaner Breather Hose Kit
Reproduction air cleaner hose set for all Mopar A, B and E-Body models produced
from 1966-71. Each kit features correct grooved hose and clamps and will fit and
install on all black steel air cleaners.. For black steel air cleaners.
MN1009
1966-71 .............................................................................. 19.99 kit
413, 426W, 440 Engines
MN2420
RB engines......................................................................... 42.99 ea
361, 383, 400 Engines
MN2422
B engines ........................................................................... 42.99 ea
MD2328
MD2327
Date Coded Breather Hose
MN2419
Big Block Flat Valley Pans
These fabricated valley pans are designed for “RB” and “B” engines that are using
single-plane intake manifolds. “Lips” along the sides fit underneath the edge of the
cylinder heads, making a tight seal and allowing the use of standard intake port
gaskets. Works great with Edelbrock RPM cylinder heads and other aftermarket
heads with an unbroken deck surface where the cylinder head meets the edge of
the valley pan. These pans may be used with factory cylinder heads, depending on
the intake manifold, if any break in the lower deck surface is filled with silicone.
Finished in gold iridite finish for corrosion resistance. Made in USA.
Important: Dual plane intake manifolds (both factory and aftermarket) will not fit due to
exhaust manifold interference.
Note: Because this pan fits under intake face edges, at least one cylinder head must be
removed in order to install or remove valley pan.
MN1094
1966-71 Intake Manifold Gasket Sets
Intake manifold gasket sets for 1966-71 big block and Hemi engines.
MN1094
1966-71 Hemi, factory ................................................... 14.99 set
MN1095
1966-71 383, 440 ........................................................... 29.99 set
MN1017
Universal Emission Duct Hose
Replacement aluminum flexible duct hose. This hose runs from the air cleaner
snorkel to the exhaust manifold intake heater.
MN1017
2" ID x 18" L ..................................................................... 5.99 ea
MN1018
1-3⁄4" ID x 18" L ............................................................... 19.99 ea
Intake Manifold Hardware Sets
Prevent intake manifold leaks with quality
fasteners from ARP. They’re rated at
170,000 psi and machined for optimum
thread engagement. Wide underhead flanges
and companion washers provide even load
distribution while precision-rolled threads
prevent galling and promote consistent
torque loading for optimum sealing of gasket
surfaces. Available in black oxide finished
chrome moly or corrosion resistant stainless
steel, as well as hex or 12-point heads. Washers included. Made in
USA.
Small & Big Block Wedge Engines
AR1437
black oxide
hex head ...................................................
AR1438
black oxide
12-point ...................................................
AR1439
stainless
hex head ...................................................
AR1440
stainless
12-point ...................................................
Intake Manifold Parts
34.99
34.99
49.99
54.99
set
set
set
set
419
Engines & Components K
413, 426W, 440 Engines
MN2419
RB engines......................................................................... 32.99 ea
361, 383, 400 Engines
MN2421
B engines ........................................................................... 32.99 ea
These hoses are date coded with correct lettering and color on quality Gates hose.
Score more points at judging with products with an authentic appearance. Sold by
the foot. 11⁄32" ID exactly as original.
MD2328
January 1969 ...................................................................... 14.99 ft
MD2327
January 1970 ...................................................................... 14.99 ft
MD2331
July 1968............................................................................ 14.99 ft
MD2332
July 1969............................................................................ 14.99 ft
MD2329
July 1970............................................................................ 14.99 ft
MD2330
July 1971............................................................................ 14.99 ft
Air Cleaners
Six Pack Air Cleaner
Assembly Kit
1968-69 Unsilenced Air Cleaner Assembly
Low profile
six pack
air cleaner
assembly.
Each
assembly includes
MN1013
metal base, lid, 2 studs,
2 nuts, 2 gaskets and lifetime manufacturer’s
warranty. These were designed specifically for
1970-71 B and E-Body models but may fit other
applications.
MN1013 1970-71 non-cold air ............ 429.99 ea
MN1145 1970
440 w/cold air ......... 519.99 ea
1969-72 Air
Cleaner Lid
Metal air cleaner
lid in correct
orange for 1969-72
vehicles equipped
with a 6-pack,
Hemi or with the
MD2318
Grabber/Shaker hood option.
MD2318 1969-70 six pack................... 159.99 ea
MD2319 1969-72 Hemi oval ............... 164.99 ea
MB6008 1969-72 Rd grbr/shkr 4bbl ... 164.99 ea
1969-71 Air Cleaner Baseplate
K
Engines & Components
This baseplate sits
directly on the
carburetor. Available
for 1969-71 Hemi
2x4-bbl engines and
1970-71 Challenger
or 'Cuda models with
shaker hoods and
340/383/440 4-bbl, Six
Pack, 6-BBL, or Hemi
MD7118
2x4-bbl engines.
Non-Shaker Hood Oval
MD7118 1969-71 426 Hemi, steel ........ 699.99 ea
MD7119 1969-71 426 Hemi, fiberglass . 179.99 ea
Shaker Hood
ME1621 1970-71 4bbl 340/383/440 ...... 789.99 ea
ME1622 1970-71 six pack ..................... 789.99 ea
ME1623 1970-71 Hemi Dual 4.............. 859.99 ea
MN1019
Replacement
unsilenced
air cleaner
assembly
for 340,
383 and
440 4 bbl
models.
Includes both the top and base that are stamped
steel and feature the correct finish.
MN1015 1968-69 340/383/440 4bbl ..... 179.99 set
Edelbrock Signature
Series Air Cleaners
Top off your engine with
a Pro-Flo air cleaner.
The Edelbrock signature
and styling go beautifully
with Edelbrock Signature
E1223
Series valve covers. Stamped
from 18 gauge steel and triple chrome plated for a
high quality finish and good looks. Fits all popular
5-1/8" diameter carburetor necks.
Important: Use E1121 with all Edelbrock square bore
carburetors.
Note: No further discounts apply.
Mopar Performance Air Cleaner Set
Air cleaner assembly with
“Mopar Performance” cast
into the aluminum lid.
Matches cast black
Mopar Performance
valve covers. 13-1⁄4"
diameter. Includes lid,
base, stem, wing nut
and carb to air cleaner
gasket. 3" element included.
MN1014 cast aluminum ....................... 109.99 set
Round 14" Diameter w/3" Element
E1207 chrome w/logo ...........................
E1121 chrome w/logo, low profile ........
E1223 black w/logo, low profile ...........
Round 10" Diameter w/2" Element
E1208 chrome with logo .......................
E1203 black powdercoat w/logo ...........
Round 6" Diameter w/2" Element
E1209 with logo ....................................
Triangular w/2-1/2" Washable Element
E1222 chrome with logo .......................
Chrome Air Cleaner
Edelbrock Elite Series Air Cleaners
Chrome air cleaner
14" diameter,
available with either
4" or 6" depth and
features a 5-1/8" neck
T2195B
to fit most standard 4-BBL
carburetors. Only fits 4-bbl carburetors. 1 year
manufacturer’s warranty.
Designed to match the
Elite Series valve covers
and breathers, all Elite
series air cleaners have
polished aluminum
finned tops on a black
matte background.
Available with or without
Edelbrock logo. All
include a black anodized
knurled nut and PCV
adapter. For use on 5-1/8"
carburetor necks.
Note: Not legal for sale or use in California on pollution
controlled motor vehicles.
T2195B 14" x 4", 5-1⁄8" neck size ......... 49.99 ea
T2286
14" x 6", 5-1⁄8" neck, low profile .. 44.99 ea
Replacement
Air Filter
21.99 ea
21.99 ea
24.99 ea
94.99 ea
E4222
Important: Use E4221 with all
Edelbrock square bore carburetors.
Note: No further discounts apply.
T2110
Replacement paper air
filter element.
T2110
14" x 4" Fits T2195B ............. 10.99 ea
T2287
14" x 6" Fits T2286 ............... 18.99 ea
MN1027
29.99 ea
31.99 ea
31.99 ea
Round 14" Diameter w/3" Element
E4207
with logo .................................. 69.99 ea
E4221
with logo .................................. 64.99 ea
Round 10" Diameter w/2" Element
E4210
with logo .................................. 74.99 ea
Triangular w/2-1/2" Washable Element
E4222
with logo .................................. 124.99 ea
MN1033
Air Cleaner Pie Tins
Die-stamped aluminum “tins” that fit on top of the air cleaner lids of Hi-Po engines.
Each tin features color logos for engine size and series name. Red logos were used
through late 1968 and orange logos were used for most 1969 models and later.
1967-68 with Red Logo
MN1020
“340 Four Barrel” .............................................................. 64.99 ea
MN1030
“383 Commando” .............................................................. 64.99 ea
MN1021
“383 Four Barrel” .............................................................. 64.99 ea
MN1023
“383 Magnum” .................................................................. 64.99 ea
MN1029
“383 Roadrunner Engine” ................................................. 64.99 ea
MN1032
“383 Super Commando”.................................................... 64.99 ea
MN1025
“440 Magnum” .................................................................. 64.99 ea
MN1034
“440 Super Commando”.................................................... 64.99 ea
MN1027
“440 T-N-T”....................................................................... 64.99 ea
420
Original Style Air Cleaners
1969-71 with Orange Logo
MN1019
“340 Four Barrel” ..............................................................
MN1022
“383 Magnum” ..................................................................
MN1028
“383 Roadrunner Engine” .................................................
MN1031
“383 Super Commando”....................................................
MN1024
“440 Magnum” ..................................................................
MN1026
“440 T-N-T”.......................................................................
MN1033
“440 Super Commando”....................................................
64.99
64.99
64.99
64.99
64.99
64.99
64.99
ea
ea
ea
ea
ea
ea
ea
Toll Free Order Line 800.854.1280
Air Cleaner Components
ME1661
MN1011
MF228
1966-69 Hemi Chrome Dome Air Cleaner
Reproduction Hemi Chrome Dome air cleaner for 196670 street Hemi models. Made to original specifications,
featuring stamped steel base and zinc finish. Works
with production-style Carter AFB carburetors. 4-1/4"
air horn opening and 6.700" center to center spacing.
Also fits other dual carburetor Hemi applications.
Made in the USA.
MN2860 1966-69 street Hemi ......... 849.99 ea
MF229
MF230
AirAid Concept II
Universal 14" Air Filter
AirAid's Concept
II filter features
a beautiful
lightweight
aluminum lid
that's perfect
for user
customization.
The curved top
enhances air flow
AR801455
and provides
additional clearance for the carburetor float bowl
vents. Along with the re-designed lid, the Concept II
also features a new base that enhances air flow. The
new element features SynthaMax material, a 100%
synthetic, non-oiled, color fast, classic red media.
Billet tool & key fob included. Available in 3", 4"
and 5" size.
AR801451 3" element .......................... 144.99 ea
AR801455 4" element .......................... 149.99 ea
AR801461 5" element .......................... 154.99 ea
MF228
SP98801
MF229
MN2867
MN2868
Hemi Chrome Dome Air Cleaner Bases
These steel bases mount a Hemi chrome dome air
cleaner to single 4 barrel carburetor and dual 4 barrel
Edelbrock carburetors. The dual 4 barrel base has
6.700" center to center spacing and both bases have
5-1/8" air horn openings. Made in the USA.
Note: Will not mount dual Holley 4 barrel carburetors.
MN2868
MN2867
single 4 bbl ............................ 399.99 ea
dual 4 bbl Edelbrock ............. 449.99 ea
Oval air cleaner base for 1966-71 Hemi models with
factory-style dual four barrel in-line intake manifold
with Edelbrock carburetors. This steel base has 5-1/8"
air horn openings and measures 6.700" center to center
measurement. Made in the USA.
MN2866 1966-71 Hemi .................... 799.99 ea
Fasteners and gaskets to seal factory engine air cleaners
on various Mopar models.
Air Shroud Plate
Replacement of the steel plate that bolts onto the
baseplate of AAR and T/A air cleaners.
ME1661 1970
AAR & T/A ............ 17.99 ea
Air Cleaner Seals & Gaskets
Airbox to Baseplate Seal
MN1010 1969-72 air grabber models .. 119.99 ea
Baseplate to Hood Seal
MB6001 1969
A12 model .............. 44.99 ea
Fiberglass Hood-to-Baseplate Seal
MN1011 1970
AAR & T/A ............ 119.99 ea
Shaker Baseplate Seal
MN1012 1970-71 E-Body models ....... 56.99 ea
Air Cleaner Stud & Wing Nut Sets
Each wing nut is 1⁄4"-20. 1 year manufacturer’s
warranty.
T2174
3" stud ..................................... 1.99 set
T2178
4" stud ..................................... 1.99 set
T2175
6" stud ..................................... 2.99 set
OE Air Cleaner Stud
1962-74 Single 4-bbl Carburetor
MN1005 1962-74 OEM, trim to fit ...... 14.99 ea
Hemi w/ Carter Carburetor, A12 w/Lift-Off Hood
MF227 1966-71 440 & Hemi ............ 3.99 ea
Models w/Carter AVS Carburetor
MF228 1968-71 1⁄4"-20 x 5" long ..... 3.99 ea
1970-74 340 & 440 Six Pack
MF229 1970-74 1⁄4"-20 .................... 8.99 ea
Reproduction Wing Nut
The correct reproduction wing nut for all 1/4" stud
carburetor applications. Zinc plated for a lasting shine.
MF230 all 1/4" zinc plated wing nut. 2.99 ea
A-Body Hood Scoop To Filter Seals
Round rubber hood seals that connect filter to scoop
on cars with scoop style hoods. 4" diameter.
MA2462 1970-71 hood scoop seals ..... 59.99 pr
Shaker Baseplate Nut washer Set
Replacement of the diamond shaped metal washers
which mount the center baseplate to the outer adapter
ring.
ME1663 1970-71 set of 7 .................... 29.99 set
SP98891
Spectre ProFab
Low Profile Oval Inlet Air Cleaner
Looking to add a high tech look to your engine
compartment? Check out these Spectre ProFab low
profile oval inlet polished air cleaners. Available in
single, 90º dual, or 180º dual inlet styles. Fits all
carburetors or TBI with 5-1/8" neck. Includes Spectre’s
HPR® air filter.
SP98801
single ................................. 199.99 ea
SP98891
90º dual .............................. 199.99 ea
SP98303A
Spectre ProFab Cowl Induction Air Cleaner
These Spectre ProFab aluminum cowl induction
air cleaners are designed to fit cowl induction hood
Chevy's. Draws air form the high pressure area at the
base of the windshield. Available in round, straight back
opening or sidewinder design. Fits all carburetors or
TBI with 5-1/8" neck. Includes Spectre’s HPR® air filter.
SP98302A straight back ...................... 199.99 ea
SP98303A round .................................. 249.99 ea
Air Cleaner Components
421
Engines & Components K
Hemi Oval Air Cleaner Base
for Edelbrock Carburetors
Air Cleaner Fastener & Sealing Components
Performance Intakes
SP70228A
SP70771A
SP74762A
blue
SP70771B
SP70338B
SP70168A
SP70771C
SP70764B
SP70741A
black
red
blue
K
Engines & Components
blue
black
red
white
These air intake systems use a dual plenum design
available with two 45˚ intake tubes or two 6" straight
tubes both with two filters to get the most power
from your engine! Includes intake tubes, filters, boots,
clamps, and hardware. Choose from blue, black, red,
or white filters. Fits standard 5-1/8" carb neck.
Note: *Requires 3-1/2" clearance between the top of the
carburetor and the hood. **Requires 3-3/4" clearance
between the top of the carburetor and the hood.
45˚ tubes
SP70761A* blue filters......................... 199.99
SP70761B* black filters ....................... 199.99
SP70761C* red filters .......................... 199.99
SP70761D* white filters....................... 199.99
6" straight through tubes
SP70796A** blue filters......................... 199.99
SP70796B** black filters ....................... 199.99
SP70796C** red filters .......................... 199.99
SP70796D** white filters....................... 199.99
422
ea
ea
ea
ea
ea
ea
ea
ea
Spectre Performance
Note: *Requires 2-1/2" clearance between the top of the
carburetor and the hood. **Requires 2" clearance between
the top of the carburetor and the hood.
Dual Plenum Air Intakes
SP70771A* blue filters......................... 249.99
SP70771B* black filters ....................... 249.99
SP70771C* red filters .......................... 249.99
SP70771D* white filters....................... 249.99
Dual Plenum Sheet Metal Intakes
Intake with Two 45˚/90˚ tubes
SP70764A** blue filters......................... 269.99
SP70764B** black filters ....................... 269.99
SP70764C** red filters .......................... 269.99
SP70764D** white filters....................... 269.99
Intake with Two 45˚ Tubes
SP70778A** blue filters......................... 229.99
SP70778B** black filters ....................... 229.99
SP70778C** red filters .......................... 229.99
SP70778D** white filters....................... 229.99
black
red
white
Universal 90˚/45˚ Single Plenum Air Intake
Get the most power from your engine with these sheet
metal aluminum plenum design, offering extremely
low profile dimensions for tight hood clearance
applications. Available with two 45˚ tubes or two
45˚/90˚ tubes. Fits all carburetors and TBI throttle
bodies with 5-1/8" neck. Includes intake tubes, filters,
boots, clamps, and hardware. Choose from blue, black,
red, or white filters.
Universal Dual Plenum Air Intakes
SP70752D
white
Universal Low Profile
Dual Plenum Air Intakes
SP70796D
white
SP70778D
blue
SP70761A
red
These muscle car air cleaners combine a modern
appearance with the classic style of the past. Washable
and reusable, these lifetime filters provide more power
and performance by allowing more air flow into your
engine than ordinary paper filters. Includes the top,
base, and Spectre HPR® air filter in your choice of
red, blue, black or white.
3" Tall Filter
SP74762A blue ..................................... 99.99 ea
SP74762B black.................................... 99.99 ea
SP74762C red ....................................... 99.99 ea
SP74762D white ................................... 99.99 ea
4" Tall Filter
SP74763A blue ..................................... 119.99 ea
SP74763B black.................................... 119.99 ea
SP74763C red ....................................... 119.99 ea
SP74763D white ................................... 119.99 ea
Universal 14" or 16" Air Boxes
Direct cool air into your engine with these universal
air boxes. Includes components and hardware for
installation in most vehicles. 180˚, 150˚, 135˚, and
120˚ versions are available. Choose from 14" or 16"
housing with either black or chrome ducting. Fits
standard 5-1/8" carb neck.
14" Universal Air Box
SP70228A black duct
180˚ ............ 149.99 ea
SP70228B chrome duct 180˚ ............ 229.99 ea
SP70318A black duct
150˚ ............ 149.99 ea
SP70318B chrome duct 150˚ ............ 179.99 ea
SP70328A black duct
135˚ ............ 149.99 ea
SP70328B chrome duct 135˚ ............ 179.99 ea
SP70338A black duct
120˚ ............ 149.99 ea
SP70338B chrome duct 120˚ ............ 179.99 ea
16" Universal Air Box
SP70168A black duct
180˚ ............ 199.99 ea
SP70168B chrome duct 180˚ ............ 229.99 ea
SP70188A black duct
150˚ ............ 199.99 ea
SP70188B chrome duct 150˚ ............ 229.99 ea
SP70138A black duct
135˚ ............ 199.99 ea
SP70138B chrome duct 135˚ ............ 229.99 ea
SP70118A black duct
120˚ ............ 199.99 ea
SP70118B chrome duct 120˚ ............ 229.99 ea
black
Extraflow 14" Air Cleaners
SP70188B
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
These air intake systems use a single plenum design
with 45˚/90˚ tube to get the most power from your
engine! Available for driver or passenger side in
standard height or low profile configuration. Includes
intake tubes, filters, boots, clamps, and hardware.
Choose from blue, black, red, or white filters. Fits
standard 5-1/8" carb neck.
Note: Standard height air intakes require 3-1/2" clearance
between the top of the carburetor and the hood. Low-profile
air intakes require 2-1/2" clearance between the top of the
carburetor and the hood.
Standard Height Air Intakes
SP70741A blue filter passenger side .
SP70741B black filter passenger side .
SP70741C red filter
passenger side .
SP70741D white filter passenger side .
SP70742A blue filter driver side........
SP70742B black filter driver side........
SP70742C red filter
driver side........
SP70742D white filter driver side........
Low-Profile Air Intakes
SP70751A blue filter passenger side .
SP70751B black filter passenger side .
SP70751C red filter
passenger side .
SP70751D white filter passenger side .
SP70752A blue filter driver side........
SP70752B black filter driver side........
SP70752C red filter
driver side........
SP70752D white filter driver side........
149.99
149.99
149.99
149.99
149.99
149.99
149.99
149.99
ea
ea
ea
ea
ea
ea
ea
ea
149.99
149.99
149.99
149.99
149.99
149.99
149.99
149.99
ea
ea
ea
ea
ea
ea
ea
ea
Toll Free Order Line 800.854.1280
Performance Intakes
SP70793C
SP70792B
SP71015B
SP71014A
SP70757C
blue
SP70747B
black
red
white
SP71017B
Universal DTM Plenum Air Intakes
These air intake systems use a DTM (Down The
Middle) plenum design with either a 90˚ or Y-tube
tube to get the most power from your engine! Includes
intake tubes, filters, boots, clamps, and hardware.
Choose from blue, black, red, or white filters. Fits
standard 5-1/8" carb neck.
Note: Each DTM intake requires 2-1/4" clearance between
the top of the carburetor and the hood.
90˚ Tube
SP70792A
SP70792B
SP70792C
SP70792D
Y-Tube
SP70793A
SP70793B
SP70793C
SP70793D
SP70758C
blue filter ............................
black filter ..........................
red filter..............................
white filter ..........................
299.99
299.99
299.99
299.99
ea
ea
ea
ea
blue filter ............................
black filter ..........................
red filter..............................
white filter ..........................
339.99
339.99
339.99
339.99
ea
ea
ea
ea
SP70748A
SP71013D
SP71010A
blue
black
red
white
Universal Single Plenum Air Intakes
These air intake systems use a single plenum design
with 90˚ tube to get the most power from your
engine! Available in standard height or low profile
configuration. Includes intake tubes, filters, boots,
clamps, and hardware. Choose from blue, black, red,
or white filters. Fits standard 5-1/8" carb neck.
Standard Height - 90° Tube
SP70747A blue filter ..........................
SP70747B black filter ........................
SP70747C red filter ............................
SP70747D white filter ........................
Low Profile - 90° Tube
SP70757A blue filter ..........................
SP70757B black filter ........................
SP70757C red filter ............................
SP70757D white filter ........................
Standard Height - Y-Tube
SP70748A blue filters.........................
SP70748B black filters .......................
SP70748C red filters ..........................
SP70748D white filters.......................
Low Profile - Y-Tube
SP70758A blue filters.........................
SP70758B black filters .......................
SP70758C red filters ..........................
SP70758D white filters.......................
149.99
149.99
149.99
149.99
ea
ea
ea
ea
149.99
149.99
149.99
149.99
ea
ea
ea
ea
199.99
199.99
199.99
199.99
ea
ea
ea
ea
199.99
199.99
199.99
199.99
ea
ea
ea
ea
black
red
white
Spectre HPR® Cone Air Filters
®
These Spectre HPR air filters are the most versatile of
their kind on the market! Designed to fit 3", 3-1/2", and
4" tubes. Washable and reusable, these lifetime filters
provide more power and performance by allowing more
air flow into your engine than ordinary paper filters.
Note: *Will only fit 3" inlet tubes. Also features all-rubber
construction, no chrome finish.
3.7" Tall Filter
SP71011A blue.....................................
SP71011B black ...................................
SP71011C red ......................................
SP71011D white...................................
6.5" Tall Filter
SP71010A* blue.....................................
SP71010B* black ...................................
SP71010C* red ......................................
SP71010D* white...................................
6.7" Tall Filter
SP71012A blue.....................................
SP71012B black ...................................
SP71012C red ......................................
SP71012D white...................................
10.5" Tall Filter
SP71013A blue.....................................
SP71013B black ...................................
SP71013C red ......................................
SP71013D white...................................
19.99
19.99
19.99
19.99
ea
ea
ea
ea
19.99
19.99
19.99
19.99
ea
ea
ea
ea
29.99
29.99
29.99
29.99
ea
ea
ea
ea
39.99
39.99
39.99
39.99
ea
ea
ea
ea
blue
black
red
white
Spectre HPR® Air Filters
®
Speed By Spectre HPR (high performance racing)
air filters - the world's fastest air filters! Washable and
reusable, these lifetime filters are designed to provide
you with more horsepower and quicker acceleration by
allowing more air flow into your engine than ordinary
paper filters.
Round Filter - 14" x 4"
SP71014A blue ..................................... 39.99 ea
SP71014B black ................................... 39.99 ea
SP71014C red ....................................... 39.99 ea
SP71014D white ................................... 39.99 ea
Round Filter - 14" x 5"
SP71015A blue ..................................... 59.99 ea
SP71015B black ................................... 59.99 ea
SP71015C red ....................................... 59.99 ea
SP71015D white ................................... 59.99 ea
Oval Filter - 11-1/2" x 8" x 2"
SP71016A blue ..................................... 29.99 ea
SP71016B black ................................... 29.99 ea
SP71016C red ....................................... 29.99 ea
SP71016D white ................................... 29.99 ea
Oval Filter - 15" x 8" x 2"
SP71017A blue ..................................... 39.99 ea
SP71017B black ................................... 39.99 ea
SP71017C red ....................................... 39.99 ea
SP71017D white ................................... 39.99 ea
Triangle Filter - 14" x 3"
SP71018A blue ..................................... 49.99 ea
SP71018B black ................................... 49.99 ea
SP71018C red ....................................... 49.99 ea
SP71018D white ................................... 49.99 ea
Spectre Accucharge
Precision Air Filter
Oiling System
The Accucharge
precision oiling system
applies the correct
amount of oil for
optimal performance
- no more, no less.
Designed specifically
for cleaning and oiling
of Spectre HPR®
filters. As simple to
use as a measuring
cup! Includes 12 oz. of
cleaner and 8 oz. of oil.
SP704820 .............................................. 12.99 ea
Spectre Performance
423
Engines & Components K
Note: Standard height air intakes require 3-1/2" clearance
between the top of the carburetor and the hood. Low-profile
air intakes require 2-1/2" clearance between the top of the
carburetor and the hood.
blue
SP71018A
PERFORMANCE FILTERS
13971
601290
K&N 14" Low Profile Chrome Air Cleaner
These air cleaners provide a low profile by dropping the
filter 7/8" or 1-1/4" below the carburetor flange. 5-1/8"
flange fits all popular 4-barrel carburetors. Your choice
of 4 element heights are offered to fit a wide variety
of applications. The 7/8" drop will fit carburetors with
electric choke mechanisms. Optional vent kit, item #
851190 is available and sold separately. Total height
listed below is the minimum clearance needed above
the carburetor flange.
Note: *Items marked with asterisk will not fit Edelbrock carbs
with electric choke.
K
Engines & Components
7/8" Drop Complete Assembly, without Vent Kit
601430 3" element, 3.12" total ht......... 104.99 ea
601440 4" element, 4.12" total ht......... 109.99 ea
601450 5" element, 5.12" total ht......... 114.99 ea
601460 6" element, 6.12" total ht......... 114.99 ea
1-1/4" Drop Complete Assembly, without Vent Kit
601280 3" element, 2.75" total ht......... 99.99 ea
601290 4" element, 3.75" total ht......... 114.99 ea
601300* 5" element, 4.75" total ht......... 114.99 ea
601310* 6" element, 5.75" total ht......... 109.99 ea
K&N 14" Triangular Chrome Air Cleaner
Breathe a little life into your engine compartment!
This triangular air cleaner will set your underhood
area apart from the norm. The 5-1/8" flange fits all
popular 4-barrel carburetors. Element height is 3"
while 3.62" is the minimum clearance needed above
the carburetor flange.
14" Triangular Complete Assembly, with Vent Kit
601470
3" element, 3.62" total ht ........ 114.99 ea
This Air Cleaner Is Perfect When
High Performance Is Desired But
Space Is At A Premium!
K&N Air Filter Oil & Clean/Degreaser Kit!
601260
K&N 14"
Raised Profile Chrome Air Cleaner
K&N 11" Stainless Steel Air Cleaner
This air cleaner raises the element 9/16" above the
carburetor flange. 5-1/8" flange fits all popular 4barrel carburetors. Your choice of 4 element heights
are offered to fit a wide variety of applications. Will
clear HEI distributors. Vent kit is included. Total height
listed below is the minimum clearance needed above
the carburetor flange.
9/16" Raised Profile Complete Assembly,
with vent kit
601263 2-1/4" element, 3.87" total ht .. 109.99 ea
601264 3" element, 4.62" total ht......... 99.99 ea
601260 4" element, 5.62" total ht......... 124.99 ea
601270 5" element, 6.62" total ht......... 129.99 ea
This air cleaner is perfect when high performance is
desired but space is at a premium. 5-1/8" flange fits all
popular 4-barrel carburetors. Your choice of 4 element
heights are offered to fit a wide variety of applications.
3/4" vent kit is included. Total height listed below is
the minimum clearance needed above the carburetor
flange. Top is made of long lasting polished stainless
steel while bottom is an attractive chrome finish.
11" Diameter Complete Assembly, with Vent Kit
601170 2-1/8" element, 3.12" total ht .. 119.99 ea
601180 3-1/2" element, 4.75" total ht .. 104.99 ea
601200 5" element, 6.00" total ht......... 109.99 ea
601210 6" element 7.00" total ht.......... 109.99 ea
424
K&N Filters
13973
Custom Air Cleaner Assemblies
You’ve got billet spokes on your wheels, now get
precision machined billet spokes in your engine
compartment! K&N, renowned for superior
performance, durability, and styling in their filters,
combines serious air flow with gorgeous looks in
these round, 14" billet aluminum air cleaners with
either a 5 spoke or 10 spoke lid. Both styles include a
carbon fiber insert and a 3" tall K&N element. They
are designed to fit 5-1/8" carburetor flanges, and are
available with either a 1-1/4" drop base or a standard
9/16" raised base.
13971 5 spoke w/1-1/4" drop base.... 244.99 ea
13972 5 spoke w/9/16" raised base... 244.99 ea
13973 10 spoke w/1-1/4" drop base.... 244.99 ea
13974 10 spoke w/9/16" raised base... 244.99 ea
13975 5 spoke lid only ...................... 149.99 ea
13976 10 spoke lid only ...................... 149.99 ea
K&N Air Filter Oil and Cleaner/Degreaser is the only
oil and cleaner/degreaser specially formulated to work
in combination with the cotton fabric in the K&N filter.
The use of any other could void the filter’s warranty
and potentially harm the air filter’s cotton material.
The cleaner/degreaser works to dissolve the dirt build
up and old oil filter oil and can be washed away with
water. It is environmentally friendly, and when used
as directed, is safe on paint, chrome, cast aluminum,
plastic, rubber and vinyl. The oil is designed to quickly
penetrate the filter pleats where it remains suspended
in the cotton fabric. Saturation is maintained until the
element is cleaned with K&N air filter cleaner. Each
kit includes oil, cleaner/degreaser, and service decal.
Your choice of 6-1/2 oz. aerosol spray or 8 oz. squeeze
oil bottle is offered.
995000 kit w/6-1/2 oz. aerosol spray oil. 14.99 set
995050 kit with 8 oz. squeeze oil............ 9.99 set
Toll Free Order Line 800.854.1280
PERFORMANCE FILTERS
Now In Your Choice Of Top Only Or As A Complete Assembly!
661401
black rim top only
661401XP-polished rim
661401XB-blue rim
663060
complete assembly
661401XR-red rim
Let Your Engine Breathe And Gain Valuable Horsepower!
If your engine still has its stock style filter element and air cleaner assembly, it
is probably not realizing its full horsepower potential. Restrictive elements and
turbulence inside a stock filter housing can choke critical airflow. K&N’s XStream®
Air Flow Top or the XStream® Air Flow Assembly feeds your engine all the air it
can use resulting in maximum horsepower! Choose from the complete assembly or
just add the top to your existing round filter. Either way, you’ll enjoy the benefits of
a high flow element that cuts turbulence. Cleanable and reusable just like our other
filters. Height listed below is minimum clearance needed above the carburetor flange.
XStream Air Flow Top (Top Only)
661401
14" diameter black rim ..................................................... 69.99 ea
661401XP 14" diameter polished rim ................................................ 79.99 ea
661401XB 14" blue rim ...................................................................... 79.99 ea
661401XR 14" red rim ........................................................................ 79.99 ea
XStream Air Flow Assembly 7/8" Drop (For 5-1/8" Neck Flange)
663050
with 3" element (3-1/8" total height) ................................ 159.99 ea
XStream Air Flow Assembly 1-1/4" Drop (For 5-1/8" Neck Flange)
663040
with 3" element (2-3/4" total height) ................................ 144.99 ea
663060
with 4" element (3-3/4" total height) ................................ 149.99 ea
663070
with 5" element (4-3/4" total height) ................................ 159.99 ea
XStream Air Flow Assembly Raised 9/16" Base (For 5-1/8" Neck Flange)
663010
with 3" element (4-5/8" total height) ................................ 154.99 ea
663020
with 4" element (5-7/8" total height) ................................ 169.99 ea
663030
with 5" element (6-7/8" total height) ................................ 174.99 ea
impregnated
pleated cotton,
K&N filter
elements exceed
minimum
filtration
standards while
creating little
restriction to air
flow. This results
in more air going
into the engine
and more power
being produced.
These filters are
washable, reusable, and
backed by a one million
mile limited warranty. The
elements listed below are designed for use with K&N chrome and stainless steel
air cleaner assemblies.
14" Round Elements
E1650
3" height, 14" diameter ...................................................... 49.99 ea
E3750
4" height, 14" diameter ...................................................... 59.99 ea
E3760
5" height, 14" diameter ...................................................... 64.99 ea
E3770
6" height, 14" diameter ...................................................... 69.99 ea
11" Round Elements
KE1200
2-1/8" height, 11" diameter ............................................... 54.99 ea
E1250
3-1/2" height, 11" diameter................................................ 49.99 ea
E3680
5" height, 11" diameter ...................................................... 54.99 ea
E3690
6" height, 11" diameter ...................................................... 59.99 ea
14" Triangular Element
E3737
3" height, 14" triangular .................................................... 54.99 ea
Provide An Air-Tight Fit For Your Air Filter Element!
K&N Air Filter Sealing Grease seals the air
cleaner assembly, eliminating the possibility
of dirt, dust and other particles from
entering your carburetor from between the
air filter element and air cleaner assembly.
This is especially important if you will
be operating your vehicle off road or in extremely dusty conditions such as
construction sites, etc.. K&N Air Filter Sealing Grease resists heat and will not
melt or run off. Choose from 6 ounce or 1 ounce squeeze tube.
990704
6 ounce tube ...................................................................... 11.99 ea
253900-universal fit pre-cleaner
Extend The Service Interval Of Your K&N Air Filter!
The K&N Airforce Pre-Cleaner is a specially designed foam filter wrap made to extend
the service interval of your K&N Air Filter. It is especially helpful when operating
in very dusty conditions such as off-road or in construction sites. Manufactured
from large open cell foam, the Airforce Pre-Cleaners are available as a custom fit
application for 14" round elements or as a universal “cut to fit” application. “Cut
to fit” applications come with velcro straps to secure the foam to your air cleaner.
14" Diameter Custom Fit Airforce Pre-Cleaners
253750
with 4" high element......................................................... 24.99 ea
253760
with 5" high element......................................................... 29.99 ea
253770
with 6" high element......................................................... 29.99 ea
Universal “Cut To Fit” Airforce Pre-Cleaners
253900
7" high x 48" long ............................................................ 24.99 ea
253918
18" high x 48" long ........................................................... 44.99 ea
253924
24" high x 48" long ........................................................... 59.99 ea
253930
30" high x 48" long ........................................................... 69.99 ea
Protect Your Engine And Carburetor From Damage!
Damage to pistons, rings and other components can be caused by accidently dropping
something into your carb while the air cleaner assembly is off. The K&N Carburetor
Cover is used on 5-1/8" carburetors eliminating the risk of dropping bolts, nuts,
screws or other items down the throat and into the intake manifold. Also works
well in keeping dirt, dust and other elements out of your carb during times you
must store your engine or vehicle with the air cleaner assembly removed. Choose
from black, red or orange.
5-1/8" Carburetor Cover
858913C
(specify black, red or orange) ........................................... 29.99 ea
K&N Filters
425
Engines & Components K
253750-custom fit pre-cleaner
K&N
Air Cleaner Assemblies
Using oil-
These Custom Billet Air Cleaners Go Beyond Engine Dress-Up
Take Your Mopar Engine to a New Level of Excellence!
Air Cleaner Bases
CNC-machined to fit snugly onto
standard 5-1/8" carburetor necks.
Available for single 4 bbl and 2 x 4
bbl Holley and Edelbrock carburetors.
Will not warp with heat!
hed Finish!
Satin or Polis
Available in
Air Cleaner Lids
Lids are CNC-machined from a 30
pound block of billet aluminum.
plain style lid
ribbed style lid
Washable
Filter Elements
Choose from orange or white
cotton filter elements, available
in 2" height to fit most vehicles
or 3" for applications with extra
hood clearance.
Custom Hold-Downs
These brackets fasten from
the underside of the air
cleaner, leaving the topside
clear and uncluttered.
engraved 1" style lid
Choose Your Custom Air Cleaner in Four Easy Steps:
Simply choose an air cleaner lid size, finish and design, a filter element height and color, a base for your
application, and finally the correct hold-down set to obtain that custom billet look!
K
Engines & Components
1
2
Choose Your Lid Size & Design
1" x 15" Billet Air Cleaner Lids
Satin Finish
MN2811 1960-76 plain......................... 429.99
MN2813 1960-76 ribbed ...................... 429.99
MN2815 1960-76 embossed Hemi ....... 429.99
MN2825 1960-76 engraved 572 Hemi . 429.99
MN2823 1960-76 engraved 540 Hemi . 429.99
MN2821 1960-76 engraved 528 Hemi . 429.99
MN2819 1960-76 engraved 500 Hemi . 429.99
MN2817 1960-76 engraved 426 Hemi . 429.99
Polished Finish
MN2812 1960-76 plain......................... 529.99
MN2814 1960-76 ribbed ...................... 529.99
MN2816 1960-76 embossed Hemi ....... 529.99
MN2826 1960-76 engraved 572 Hemi . 529.99
MN2824 1960-76 engraved 540 Hemi . 529.99
MN2822 1960-76 engraved 528 Hemi . 529.99
MN2820 1960-76 engraved 500 Hemi . 529.99
MN2818 1960-76 engraved 426 Hemi . 529.99
2" x 15" Billet Air Cleaner Lids
Satin Finish
MN2844 1960-76 426 Hemi 500 hp..... 789.99
MN2846 1960-76 500 Hemi 550 hp..... 789.99
MN2848 1960-76 528 Hemi 650 hp..... 789.99
MN2850 1960-76 540 Hemi 800 hp..... 789.99
MN2852 1960-76 572 Hemi 875 hp..... 789.99
Polished Finish
MN2845 1960-76 426 Hemi 500 hp..... 929.99
MN2847 1960-76 500 Hemi 550 hp..... 929.99
MN2849 1960-76 528 Hemi 650 hp..... 929.99
MN2851 1960-76 540 Hemi 800 hp..... 929.99
MN2853 1960-76 572 Hemi 875 hp..... 929.99
426
embossed style lid
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
1" x 20" Billet Air Cleaner Lids
Satin Finish
MN2780 1966-76 plain......................... 429.99
MN2782 1966-76 ribbed ...................... 429.99
MN2784 1966-76 embossed Hemi ....... 429.99
MN2794 1966-76 engraved 572 Hemi . 429.99
MN2792 1966-76 engraved 540 Hemi . 429.99
MN2790 1966-76 engraved 528 Hemi . 429.99
MN2788 1966-76 engraved 500 Hemi . 429.99
MN2786 1966-76 engraved 426 Hemi . 429.99
Polished Finish
MN2781 1966-76 plain......................... 529.99
MN2783 1966-76 ribbed ...................... 529.99
MN2785 1966-76 embossed Hemi ....... 529.99
MN2795 1966-76 engraved 572 Hemi . 529.99
MN2793 1966-76 engraved 540 Hemi . 529.99
MN2791 1966-76 engraved 528 Hemi . 529.99
MN2789 1966-76 engraved 500 Hemi . 529.99
MN2787 1966-76 engraved 426 Hemi . 529.99
2" x 20" Billet Air Cleaner Lids
Satin Finish
MN2834 1966-76 426 Hemi 500 hp..... 789.99
MN2836 1966-76 500 Hemi 550 hp..... 789.99
MN2838 1966-76 528 Hemi 650 hp..... 789.99
MN2840 1966-76 540 Hemi 800 hp..... 789.99
MN2842 1966-76 572 Hemi 875 hp..... 789.99
Polished Finish
MN2835 1966-76 426 Hemi 500 hp..... 929.99
MN2837 1966-76 500 Hemi 550 hp..... 929.99
MN2839 1966-76 528 Hemi 650 hp..... 929.99
MN2841 1966-76 540 Hemi 800 hp..... 929.99
MN2843 1966-76 572 Hemi 875 hp..... 929.99
Custom Billet Air Cleaners
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
Choose Your Filter Element
These washable and reusable cotton filter elements
are available in 15" and 20" configurations. The 2"
versions fit most vehicles, while the 3" version will
provide better air flow for those with additional hood
clearance. Choose from the standard filter or the
lifetime version with its extra dense cotton material
in your choice of orange or white.
15" Elements
Standard
MN2497 1960-76 2" white .............. 55.99 ea
MN2805 1960-76 2" orange ............ 71.99 ea
MN2807 1960-76 3" white .............. 91.99 ea
MN2809 1960-76 3" orange ............ 105.99 ea
Lifetime
MN2804 1960-76 2" white .............. 119.99 ea
MN2806 1960-76 2" orange ............ 125.99 ea
MN2808 1960-76 3" white .............. 119.99 ea
MN2810 1960-76 3" orange ............ 125.99 ea
20" Elements
Standard
MN2498 1966-76 2" white .............. 55.99 ea
MN2774 1966-76 2" orange ............ 71.99 ea
MN2776 1966-76 3" white .............. 91.99 ea
MN2778 1966-76 3" orange ............ 105.99 ea
Lifetime
MN2773 1966-76 2" white .............. 119.99 ea
MN2775 1966-76 2" orange ............ 125.99 ea
MN2777 1966-76 3" white .............. 119.99 ea
MN2779 1966-76 3" orange ............ 125.99 ea
Toll Free Order Line 800.854.1280
Finish Off The Custom Billet Look in your Engine Bay!
single 4 bbl. carburetor base
MN2761
MN2757
426 Hemi Cast Aluminum Valve Covers
These finned cast aluminum valve covers are taller
than original, providing clearance for roller rockers.
Includes breathers, one of which doubles as an oil fill
location. Offered in powder coated or plain cast form.
Made in the USA.
MN2754 1964-71 as cast ...................... 799.99 pr
MN2755 1964-71 polished ................... 799.99 pr
MN2756 1964-71 satin machined ........ 799.99 pr
MN2757 1964-71 powder coated ......... 799.99 pr
engraved 2" style lid
MN2478
426 Hemi Aluminum Intake Manifolds
These aluminum intake manifolds for 426 Hemi are
an upgrade for the original versions offered by Mopar.
Available in single or dual 4 bbl configuration for
Holley or Edelbrock carburetors. Made in the USA.
Note: *Fits OEM style stock street Hemi.
MN2761 1964-71
MN2478 1964-71
MN2763 1964-71
MN2764* 1964-71
3
ea
ea
ea
ea
Big Block & 426 Hemi
Custom Billet Aluminum Timing Chain Cover
Choose Your Air Cleaner Base
This solid billet aluminum timing chain cover
provides a unique, custom appearance and features
an inspection plate to allow timing chain inspection
without removal of the cover. Fits Chrysler 383 ci,
400 ci, 426 ci (including Hemi), and 440 ci engines.
Made in the USA.
MN2499 1964-72 ................................. 224.99 ea
ea
ea
ea
ea
ea
ea
ea
ea
MN2475
ea
ea
ea
ea
MN2502
ea
ea
ea
ea
Big Block and Hemi Cast Aluminum Oil Pans
MN2476
Choose Your Hold-Down Set
Required to install your custom air cleaner. Choose
the version 15" or 20" version. Includes bolts. Made
from T-6 aluminum. Made in the USA.
MN2802 1960-76 15" air cleaner ......... 101.99 set
MN2771 1966-76 20" air cleaner ......... 101.99 set
426 Hemi Stamped Steel Valve Covers
These steel 426 Hemi valve covers are replicas of
the original and are offered in chrome or a black
wrinkle finish.
MN2475 1964-72 chrome .................... 299.99 pr
MN2476 1964-72 black wrinkle finish 419.99 pr
High capacity oil pans for big block 426 Hemi engines
fit flush with most frames and provide maximum ground
clearance. Features functional cooling fins. Offered as
cast or with a polished finish in 7 or 8 quart capacities.
Oil pickup included. Made in the USA.
MN2500 1964-72 7 quart as cast ...... 301.99 ea
MN2501 1964-72 7 quart polished ... 445.99 ea
MN2502 1964-72 8 quart as cast ...... 445.99 ea
MN2503 1964-72 8 quart polished ... 589.99 ea
Hemi Performance Parts
427
Engines & Components K
15" Aluminum Bases
Satin Finish
MN2796 1960-76 1 x 4 bbl Holley....... 429.99
MN2872 1960-76 1 x 4 bbl Edelbrock . 429.99
MN2798 1960-76 2 x 4 bbl Holley....... 429.99
MN2800 1960-76 2 x 4 bbl Edelbrock . 429.99
Polished Finish
MN2797 1960-76 1 x 4 bbl Holley....... 529.99
MN2873 1960-76 1 x 4 bbl Edelbrock . 529.99
MN2799 1960-76 2 x 4 bbl Holley....... 529.99
MN2801 1960-76 2 x 4 bbl Edelbrock . 529.99
20" Aluminum Bases
Satin Finish
MN2765 1966-76 1 x 4 bbl Holley....... 429.99
MN2874 1966-76 1 x 4 bbl Edelbrock . 429.99
MN2767 1966-76 2 x 4 bbl Holley....... 429.99
MN2769 1966-76 2 x 4 bbl Edelbrock . 429.99
Polished Finish
MN2766 1966-76 1 x 4 bbl Holley....... 529.99
MN2875 1966-76 1 x 4 bbl Edelbrock . 529.99
MN2768 1966-76 2 x 4 bbl Holley....... 529.99
MN2770 1966-76 2 x 4 bbl Edelbrock . 529.99
4
1 x 4 bbl Holley ...... 719.99
2 x 4 bbl Edelbrock 719.99
2 x 4 bbl Holley ...... 719.99
2 x 4 bbl Edelbrock 719.99
Replacement Oil Pans
T9311
MD2333
MD1653
T9496
MD7100
1964-76 Chrome Oil Pans
MD2334
These replacement chrome oil pans will fit the chassis just like factory equipment.
Replace your dented or stripped out O.E. oil pan with these heavy-duty steel
construction O.E.M. style oil pans. These pans hold 5 quarts of oil including filter.
1964-74 Small & Big-Block Oil Pans
1964-74 Oil Pans
Aftermarket heavy steel unpainted and chrome-plated oil pans. Each pan includes
drain plug. Gasket sold separately unless otherwise noted.
Note: Will not fit any 1973 and later B-Body models.
T9311
T9496
1964-76
1966-76
273,318 & 340 .................................................. 109.99 ea
383-440 B/RB & 426 Hemi.............................. 79.99 ea
Note: *Includes gasket.
Small Block 273-318-340
MD1653 1964-72 stock style........................................................... 69.99 ea
Big Block 383-440-426
MD2333* 1964-72 stock style ......................................................... 69.99 ea
MD2334 1966-74 7-quart .............................................................. 104.99 ea
1966-71 B-Body & E-Body "402" 5-Quart Big Block Oil Pan
Replacement “402” oil pan for all big block 1966-71 B-Body and 1970-71 E-Body
383 applications. Made from heavy gauge steel, each pan features both baffles and
all the details of the original. Comes with drain plug and washer.
MD7100 1966-71 B-Body & E-Body ............................................ 197.99 ea
1966-76 High Capacity Oil Pan
MD7103
This black 7 quart high capacity Trans-Dapt oil pan will fit the chassis just like
factory equipment. Made from heavy duty steel construction and includes baffles
for oil control.
Note: When using stock oil pump on 361-440 use MD7107 pick-up and for 426 Hemi use
MD7103 oil pump pick-up.
K
Engines & Components
MN2082
MN2082
1966-76 361-440 B/RB................................................... 141.99 ea
1966-76 426 Hemi .......................................................... 141.99 ea
MD7101
MD7104
1966-76 Hamburger's High Capacity Oil Pans
Hamburger's “Street Performance” steel oil pans feature increased oil capacity
for improve bearing life and engine durability with the added benefit of lower oil
temperatures. Includes: magnetic drain plug with brass washer and has a high gloss
red painted finish. Oil pan has a 7" center deep sump, 7 quart capacity including
oil filter, can use a stock oil pump. Does not include: oil pick up tube or oil pan
gasket. Fits 1966 and later B and RB Chrysler engines in most production chassis.
Note: Does not fit 1962-65 production chassis.
Oil Pan
MD7101 1966-76
Pick up Tubes
MD7107 1966-76
MD7103 1966-72
Oil Pan Gasket
MD7104 1966-72
428
361-440 and 426 Hemi ..................................... 209.99 ea
361-440 .............................................................
426 Hemi ..........................................................
32.99 ea
29.99 ea
all ......................................................................
14.99 ea
Replacement Oil Pans
MN2144
Moroso Chrysler Big Block Oil Pan
Moroso Chrysler big block 361-440 and 426 Street Hemi oil pan works well in chassis
with extra low front suspensions. Made in the stock configuration. Features anti
slosh baffling. This oil pan is compatible with most starter/flywheel combinations.
Made from stamped steel that has a clear zinc coating.
Note: Will not fit 1962-65 production chassis and is not recommended for racing
applications due to its shallow sump design.
MN2144
......................................................................................... 219.99 pr
Recommended Pickup
MN2145
fits stock B/RB pumps ..................................................... 69.99 pr
Toll Free Order Line 800.854.1280
Milodon Oil Pans
MD30760
MD30750
MD31935
MD31940
Milodon Stock Replacement Oil Pans
These stock replacement oil pans feature a distinctive gold plating that provides
long lasting protection against corrosion inside and out. Every pan is 100% leak
checked and block checked to the high standards of quality that Milodon is famous
for. Flat, unwarped pan rails and proper bolt hole alignment provide for a fit and
function that is unmatched in the industry. All pans are specifically designed for
use only with Milodon gaskets, sold separately. Also sold separately is Milodon’s
“crush proof” gasket seal set, item# MD40600 for 318-340 small block or item#
MD40650 for 360 small block and item# MD40700 for 383-440 big block. Requires
high volume oil pump and pickup screen.
1965-76 Milodon Oil Pan Sets
Oil pan sets contain street/strip oil pan, oil pump pickup, pan gaskets, windage
tray and oil pan bolts.
Note: Small block kits include windage tray studs and nuts. No further
discounts apply.
MD31935
MD31940
MD31930
1965-76
1971-76
1965-76
318-340 ........................................................... 449.99 set
360 .................................................................. 451.99 set
383-440 ........................................................... 399.99 set
Note: No further discounts apply.
Oil Pans
1960-72 318-340
MD30750 4-quart, 7-1/4" sump depth ..............................................
1972-86 360
MD30755 4-quart, 7-1/4" sump depth ..............................................
1965-76 383-440 & Hemi
MD30760 4-quart, 5-1/4" sump depth ..............................................
MD30761 6-quart, 5-1/4" sump depth ..............................................
Pickups
MD18650 318-360 use with MD30750 or MD30755...................
MD18660 383-440 3/8" inlet, use with MD30760 or MD30761..
MD18662 Hemi
1/2" inlet, use with MD30760 or MD30761..
134.99 ea
MD32230
134.99 ea
136.99 ea
164.99 ea
34.99 ea
34.99 ea
34.99 ea
MD32000
MD30930
MD32005
Milodon Oil Pan Components
MD31010
We offer a variety of accessories to complement Milodon oil pans.
Milodon Street/Strip Oil Pans
Note: No further discounts apply.
Extra capacity oil pans are ideal for high volume oil pumps. High volume oil pump
and extended pickup are required and sold separately.
Note: Pan capacity is quarts plus filter. No further discounts apply.
244.99 ea
244.99 ea
212.99 ea
159.99 ea
59.99 ea
MD40700
59.99 ea
Milodon Oil Pan Gaskets & Seals
47.99 ea
47.99 ea
47.99 ea
47.99 ea
47.99 ea
If you're ordering a Milodon pan, you'll need a Milodon gasket and seal to go with
it. Choose from a variety of applications and configurations below.
Note: No further discounts apply.
1960-72
MD40600
1972-up
MD40650
1965-up
MD40700
318-340ci gasket/seal set .................................................. 19.99 set
360ci
gasket/seal set .................................................. 19.99 set
383-440ci gasket/seal set .................................................. 16.99 set
Milodon Oil Pans
429
Engines & Components K
Oil Pans-Low Profile
1960-72 318-340 ci
MD30935 8-quart, 8-3/4" sump depth ..............................................
1972-up 360 ci
MD30940 8-quart, 8-3/4" sump depth ..............................................
1965-76
383-440 & Hemi
MD30930 7-quart, 7" sump depth ....................................................
Oil Pan - Deep Sump
1962-65 B-Body 383-440 ci
MD31010 7-quart, 7-3/4" sump depth ..............................................
Dipstick for Street/Strip Oil Pan
1960-up 318-360 ci
MD22060 Stainless steel for MD30935, MD30940 ..............................
1965-up
383-440 ci
MD22070 Stainless steel for MD30930, MD31010............................
Extended Pickup
1960-76 318-360 ci- Low Profile Pan
MD18345 for MD30935, MD30940.................................................
1965-76 383-440 ci
MD18325 3/8" pipe inlet, for use with MD30930 ............................
1966-71 Hemi
MD18335 1/2" pipe inlet, for use with MD30930 ............................
1965-up 383-440 ci - Deep Sump Pan
MD18320
3/8" pipe inlet ..................................................................
1966-71 383-440 ci
MD18330
1/2" pipe inlet, use with MD31010..................................
Solid Louvered Windage Trays
MD32230 318-360 ............................................................................ 64.99 ea
MD32000 big block, Hemi with stock stroke ................................... 59.99 ea
MD32005 383-440 up to 1/2" strokers ............................................. 64.99 ea
Windage Tray Install Kit
81151
small block set ................................................................. 44.99 set
Steel Gear Oil Pump Drive Shaft w/Stock Pan
MD21505 BB/Hemi, 7.875" long ..................................................... 104.99 ea
Bronze Gear Oil Pump Drive Shaft w/Stock Pan
MD21525 BB/Hemi, 7.875" long ..................................................... 134.99 ea
Oil Pan Components
MN2041
MN1070
Mopar Performance Oil Pan Gasket Sets
Mopar Performance oil pan gasket sets needed when
removing or replacing your oil pan. Each set contains
two pans gaskets and two end seals.
MN2041 all V8 except 360 .................... 11.99 set
MN2042 360 .......................................... 14.99 set
1962-76 Big Block Rear Main Seal
These replacement rear main seals are superior to the
stock rope-type seals. The rear main seal is connected
to the back of the oil pan and makes a seal against the
rear of the engine block. These two-piece neoprenerubber style rear main seals will make the job easy.
MN2081 1962-76 361-440 .................. 24.99 ea
MN2079
1960-76 Oil Pan Bolt Set
1960-76 Mr. Gasket Oil Pan Gasket Sets
MN1071
1960-74 Windage Trays & Sets
K
Engines & Components
Windage Tray Set
Mopar Performance windage sets are designed to
provide improved engine lubrication by reducing
interior windage at higher engine speed. The big block
sets includes tray and two pan gaskets and the small
block set includes tray and hardware.
Small Block
MN1070 273-340 ................................. 109.99 set
Big Block & Hemi
MN1071 361-440 ................................. 32.99 set
B/RB Wedge 500
MN2039 with 4.15" stroke................... 81.99 set
Factory Windage Tray
Replacement small block windage tray. Helps keep
oil churning down at high RPM.
MN1069 1968-73 340 ....................... 36.99 ea
MN1069 1974
360 ....................... 36.99 ea
Small Block Windage Tray Hardware Set
Mopar Performance windage tray hardware needed
for 1967 and later LA small block (318/340/360)
engines. These bolts attach to the main cap bolts and
are required to mount windage tray.
MN2040
hardware set .......................... 84.99 set
430
Oil Pan Parts
Mr. Gasket oil pan sets made from different materials.
The performance high density set is made from a highdensity cork/rubber blend. The Ultra-Seal set is made
from a cellulose/nitrile composition gasket material.
Either set will provide excellent sealing and durability.
The High Density set is great for OE replacement
or high performance street use, the Ultra-Seal and
Performance Composition Material is great for those
applications and drag racing and oval track use.
High Density Cork/Rubber Blend
MN2078 1970-76 318, 340 & 360 .... 19.99 set
Ultra-Seal - Composition Material
MN2079 1970-76 318, 340 & 360 .... 21.99 set
Performance Composition Material
Note: 2 required with windage tray.
MN2080
1960-76 361-440 ................ 21.99 set
MN1058
1964-76 Fel-Pro Oil Pan Gasket Sets
1964-76 Small Block
MN1058 1964-69
MN1060 1970-74
MN1061 1971-76
1964-76 Big Block
MN1059 1964-76
273/318/340 ......... 13.99 set
318/340 ................ 13.99 set
360 ....................... 12.99 set
B & RB Engines .. 10.99 ea
1964-76 Oil Pan Gaskets
Chrysler oil pan bolts for all V8 engines including
Hemi. Bolts are coated in black oxide to resist rust.
All bolts include washers. 5⁄16"-18 x 9⁄16".
MN1062 1960-76 all V8 engines........ 14.99 set
318-340-360 Oil Pan Hardware Sets
The engineers at ARP developed these unique oil pan
studs to install a pan and seal it properly. The studs
have a radiused bullet nose that serves to locate the
pan rails and allow the nuts to be installed without
cross-threading. For those who prefer bolts, ARP has
you covered, too. Both studs and bolts are available in
black oxide finished chrome moly steel or rust-proof
stainless steel in your choice of conventional hex style
or the space-saving 12-point nuts. The stud sets come
with a special locking flanged nut, while the bolt sets
come with washers. Made in USA.
Stud Sets
AR1429 black oxide hexhead .......... 64.99 set
AR1430 black oxide 12-point .......... 84.99 set
AR1431 stainless
hexhead .......... 89.99 set
AR1432 stainless
12-point .......... 124.99 set
Bolt Sets
AR1433 black oxide hexhead .......... 29.99 set
AR1434 black oxide 12-point .......... 29.99 set
AR1435 stainless
hexhead .......... 41.99 set
AR1436 stainless
12-point .......... 44.99 set
T4346
These OE style replacement oil pan gasket sets are
bolted between the engine block and the oil pan. The
side rails are made of cork and the end seals are made
from rubber.
T4345
1964-69 273-340 ................ 14.99 set
T4346
1971-76 360 ....................... 24.99 set
Oil Pan Bolt Set
When swapping out your oil pan, replace your worn
original bolts with a set of 20 zinc plated steel 5/16"
bolts, featuring integrated serrated lock washers. Fits
all engines.
MN2185 all............................................. 9.99 set
Toll Free Order Line 800.854.1280
Oil Pan Components
T9224
MN2043
1960-76 Chrome Hex Head Oil Pan Bolt Set
Chrome bolt set includes 2 bolts 1⁄4"-20 x 1⁄2" and
20 bolts 5⁄16" x 18-1⁄2". Grade 5 washers included.
T9272
1960-76 all engines................ 19.99 set
MN1066
T9225
Chrome Oil Dipsticks And Tubes
Chrome aftermarket dipstick and tube assembly for
various engines. Measurements listed are the length
of the dipstick minus the handle. Compare length and
markings to your original before installation.
Small Block
T9224
318-360 21-3/4" dipstick ..... 10.99 ea
Big Block
T9225
383/440 23" dipstick ........... 9.99 ea
1965-92 High-Output Oil Pump Assemblies
Mopar Performance high-output oil pump assemblies
provides a 25% increase in oil volume. Ideal
replacement for stock pump in high-performance
applications.
Note: When replacing your oil pump it is highly
recommended to replace the oil pump intermediate shaft.
MN2043 1967-92 small block ............. 81.99 ea
MN2044 1965-78 big block ................. 119.99 ea
MN2044 1966-71 Hemi ....................... 119.99 ea
MN1067
MD2339
1967-92 Oil Pump Intermediate Shaft
Dipstick & Dipstick Tube Components
Factory Dipsticks & Tubes
Authentic Mopar reproduction dipsticks are designed
to look and fit exactly like the original.
1968-74 Big Block
MN1066 1970-74 dipstick, chrome ........ 24.99 set
1970-74 Small Block
MN1067 1970-74 dipstick only ............ 24.99 set
1966-71 Dipstick & Tube Components
Dipstick and tube assemblies and components for
various Mopar engines.
1966-69 Small Block
MD2339 1966-69 dipstick .................... 16.99 ea
MD2340 1966-69 oil tube ..................... 6.99 ea
MD2338 1966-69 dipstick & tube ........ 21.99 set
1966-71 Hemi
MD2341 1966-71 Hemi dipstick .......... 21.99 ea
MD2342 1966-71 Hemi oil tube ........... 16.99 ea
MD2343 1966-71 Hemi oil tube cover ... 14.99 ea
MD2344 1966-71 Hemi oil tube clamp ... 11.99 ea
MD2345 1966-71 Hemi dipstick ............ 61.99 set
MN2083
MN2084
MN2085
Magnetic Oil Drain Plugs
A magnetic oil drain plug is cheap insurance for a
high performance engine. Located in the engine oil
and transmission pans. These plugs will catch and
hold small pieces of metal before they cause damage.
Choose from 3 sizes.
MN2083 1/2" x 20 ............................. 4.99 ea
MN2084 3/8"
self tapping .......... 3.99 ea
MN2085 1/2"
self tapping .......... 2.69 ea
M72HV
1962-74 Melling Oil Pumps
1960-76 Oil Pan Drain Plug Gasket
MN2152
Milodon Billet
Stainless Steel Engine Dipsticks
These Milodon billet stainless steel dipsticks have a
unique design, as well as many functional benefits:
all dipstick hardware is CNC machined from billet
stainless steel. Fittings, stick and hose are all stainless
steel so they will stay bright and rust free even with
use in a daily driver. They provide very effective seal
for race cars running internal vacuum pump or vac-upan system. They also feature an o-ring sealed top to
positively seal against water and dirt. Made in the USA.
Note: *Requires tube headers and will not fit with stock
cast manifolds.
MD22060
MD22070
MN2152
MN2153*
MN2153*
small block w/center sump......
big block w/center sump .........
354-392 early Hemi ................
5.7L Hemi rear & center sump
6.1L Hemi rear & center sump
59.99
59.99
52.99
54.99
54.99
ea
ea
ea
ea
ea
front
Melling oil pumps are manufactured using a proprietary
casting process which provides maximum reliability.
High volume oil pumps provide a 20-25 percent
increase in oil volume to your system.
1962-71 Big Block
M63
1962-71 440 std volume ....... 99.99 ea
M63HV 1962-71 high volume ............ 94.99 ea
1962-76 Small block
M72
1964-74 standard volume ..... 39.99 ea
M72HV 1964-74 high volume ............ 89.99 ea
1966-71 426 Hemi
M63HV 1962-71 426 Hemi ................ 94.99 ea
back
1962-74 Oil Pressure Sending Unit
If your oil light's on but your engine still has oil, the
oil pressure sending unit might be the culprit. Replace
it with this new one.
MN1742 1962-74 .................................. 22.99 ea
Big Block Oil Pump Bolt Set
High strength steel bolt set for big blocks using Melling
M63HV high volume oil pump.
MN2413 big block w/M63HV oil pump 11.99 set
Oil Pan Bolts . Oil pan Plugs
431
Engines & Components K
This is a correct replacement gasket which is used to
seal the oil pan drain plug and keep it from leaking.
G8757 1960-76 1/2" .......................... 3.99 ea
handle detail
Mopar Performance oil pump intermediate shaft
(distributor drive gear assembly) features hardened
tip shaft with full radius blend from hex to round and
has a pinned gear. This shaft connects the distributor
to the oil pump.
MN2046 1967-92 small block ............. 69.99 ea
Oiling System Components
1960-76 Factory
Oil Filters
MN1077
1966-76 Factory Oil Pickup Tube & Screen
When replacing an oil pan, don’t forget the pickup
tube and screen if needed. These corrode and can
become clogged over time, so prevent oil starvation
by installing a new pickup and screen.
1966-71 Hemi
MN1072 1966-69 Hemi...................... 32.99 ea
MN1077 1970-71 Hemi...................... 32.99 ea
1967-76 Small Block
MN1073 1967-76 3⁄8" tube ................ 32.99 ea
1968-72 361-383-400 Engines
MN1076 1968-72 1⁄2" tube ................ 89.99 ea
1968-74 383-426-440 Engines
MN1075 1968-72 3/8" tube ................ 32.99 ea
Chrysler service
replacement oil
filters for all 1960-76 Mopar
engines. Choose from short
filters which are optimal for
tight areas such as applications
with headers, or from Mopar
Performance filters for highperformance applications.
Replacement Oil Filters
MN2047
MN1086 1960-76 short filter ............... 7.99 ea
MN2049 1962-66 blk & yellow logo... 25.99 ea
High Performance Oil Filters
MN2047 all 6 & 8 cyl. ............................ 11.99 ea
Chrome Oil Filter Cover
Add protection to your
filter while achieving
a high performance
look! The same
concept as the
aluminum versions,
this chrome plated
beauty installs quickly
and looks great. Each cover features triple
chrome plating for an extra-bright finish.
T1067
3-11/16" I.D. x 5-3/16" tall .....
MN2086 3-11/16" I.D. x 4-9/32" tall .....
FL3951
Flex-a-Lite Engine Oil Coolers
These high performance Engine Oil Coolers provide
additional cooling to protect engine and transmission
from overheating. They mount to the front of the
radiator or A/C condenser. Comes complete with all
hardware, hose, fittings, adapters, and easy to follow
instructions. Made in USA.
Standard Cooling - 1/2" Tube Diameter
FL3951
5" x 20" x 3/4" . .................... 129.99 ea
Heavy Duty Cooling - 5/8" Tube Diameter
FL3953 7" x 21" x 1-1/2", 1/2" barb ... 224.99 ea
FL45251 7" x 21" x 1-1/2",
1/2" female NPT .................... 129.99 ea
FL45261 10-1/2" x 15" x 1-1/2" ........... 139.99 ea
T1067
9.99 ea
9.99 ea
Curved Oil Pickup Tube
The curve in this oil pickup tube avoids hitting the
internal baffles of most factory style passenger car oil
pans. These will also replace applications originally
equipped with a straight pickup tube, even if there are
no baffles. Depending on the oil pan, your pickup to
oil pan clearance should be between 1/4" and 3/8" .
top detail
Re-Usable Billet Oil Filter
Note: Modifications to this pickup may be necessary.
MN2186
V8......................................... 35.99 ea
Never buy another oil filter again. The two piece
housing with full o-ring seals contains an integral
magnet to trap any large particles, while a washable
filter element of finely woven stainless steel mesh filters
particles down to 45 microns. Just wash every 3000
miles. Get an oil filter that lasts a lifetime at a fraction
of the price of other units on the market.
MN2416 all V8 ..................................... 119.99 ea
Derale High Capacity Engine Oil Coolers
This high capacity 6-pass cooler features heavy duty
tube and fin, 1/2" seamless copper tubes expanded into
3/4" aluminum extraction, plastic edge guard protectors
and an attractive black powder coated finish. Cooler
size 7-1/2" x 17" x 3/4".
15502
high-capacity ......................... 89.99 ea
MN2051
K
Engines & Components
FSS375
FRA300
FilterMag Oil Filter Magnets
MN2052
1964-92 Small Block
Right Angle Oil Filter Adapter Set
Mopar Performance right angle oil filter adapter set
allows 90° rotation of the oil filter. Made of aluminum
and provides necessary clearance for headers, engine
swaps, etc. Filter not included.
Note: Some early vehicles used a cast-iron adapter. This
adapter will function and interchange with the cast-iron
original exactly.
MN2051 oil filter adapter ...................... 190.99 set
MN2052 replacement adapter gasket ....
9.79 ea
432
FilterMag’s powerful rare-earth magnets trap and hold
wear inducing metal particles smaller than 40-microns
down to 1-micron that the filter cannot stop. The superstrong magnetic force holds FilterMag to the canister.
FilterMags are reusable and will reduce maintenance
costs by extending the life of your oil. Fits steel oil
filter canisters from 2.9" to 5.5" in diameter. The heavy
duty/racing FilterMags have a larger curve surface that
allows for a stronger magnetic field and a stronger
magnetic pull force, designed for more demanding
situations. Flat style FilterMags are also available for
automatic transmission pans and differential covers.
Standard Applications
FSS300 2.90"-3.20" 1.90" tall ............ 49.99 ea
FSS375 3.50"-3.80" 2.50" tall ............ 59.99 ea
Heavy Duty/Racing Applications
FRA300 2.90"-3.20" 2.62" tall ............ 79.99 ea
FRA365 3.50"-3.80" 2.62" tall ............ 89.99 ea
FRA450 4.25"-5.50" 3.00" tall ............ 109.99 ea
Oiling System Components
Pour Boy All Purpose
Filler Spout
Pour Boy all purpose filler
spout takes the place of
funnels. Its unique, multiple thread
h d ddesign
i fits a
variety of containers from oil bottles to antifreeze,
windshield washer fluid to gas treatments, all
with an airtight seal! Flow of the fluid is easily
controlled by simply bending the spout. No more
mess, no more fuss, and no more funnels! 3 per
package.
RM1003 ............................................... 7.99 kit
Toll Free Order Line 800.854.1280
Oils & Lubricants
Royal Purple Synthetic Oil
HR Conventional High
Performance Oil
Break-In Oil
From the leader in racing
lubricants, now comes a oil
designed specifically for high
performance engines. Joe
Gibbs Driven HR Oils build
on our original formula while
adding critical additives to
protect engines when they are
not running. Our formula uses
the same additive technology
developed for the U.S. Military
for storing and and shipping.
It protects against rust and
corrosion so your engine is
protected even when it's not
running. It features higher
levels of Zinc than regular
passenger car oils to deliver proper anti-wear
protection for older style push-rod and flat-tappet
engines.
HR2006 10W30 quart........................ 8.99 ea
HR2007 10W30 case of 12 quarts ..... 107.99 cs
HR2106 15W50 quart........................ 8.99 ea
HR2107 15W50 case of 12 quarts ..... 107.99 cs
Hot Rod
Vintage Car Oil
From the leader in racing
lubricants, now comes an oil
designed specifically for hot
rods, street rods, and vintage
cars. Joe Gibbs Driven Hot Rod
Oil takes the formulation used
by thousands of racers and adds
critical protective chemicals. If
your current oil carries an API
"donut" symbol, it probably
lacks the anti-wear chemistry
that historic and racing engines
need. Designed specifically
for older performance engines
featuring high levels of zinc for
wear protection and militarygrade corrosion inhibitors for storage protection.
HR1506 10W30 quart........................ 10.99
HR1507 10W30 case of 12 quarts ..... 131.99
HR1606 15W50 quart........................ 10.99
HR1607 15W50 case of 12 quarts ..... 131.99
BR is used by Joe Gibbs Racing
to break-in and dyno all their
NASCAR Nextel Cup and
Busch Series engines. This
petroleum based oil provides
superior break-in properties
for flat-tappet engines. The
special additive package
promotes ring seal and
provides maximum protection
for cams and lifters during
initial break-in. BR can also
be used to break in roller
cam engines, and as a general
purpose dyno oil.
BR106 15W50 quart........................ 8.99 ea
BR107 15W50 case of 12 quarts ..... 107.99 cs
BR114 15W50 2-1/2 gallon jug ...... 85.99 ea
BR-30 Break-In Oil
The same high zinc and
phosphorus formula as our
original break-in oil, now
in a SAE 5W-30 viscosity
for tight clearance and/or
low temperature break-in.
Good for restrictor plate
engines, drag race engines,
and OEM rebuilds. Provides
excellent ring sealing.
Does not require additional
additives. Good for full
power pulls on the dyno,
one night of racing or up to
400 miles on the street.
BR1806 5W30
quart......................... 8.99 ea
BR1807 5W30
case of 12 quarts ...... 107.99 cs
Z-ALT Muscle Car Oil
ea
cs
ea
cs
Royal Purple Engine Break In Oil
Engine builders have grown
increasingly concerned that
many modern motor oils do
not provide adequate wear
protection for new engines,
particularly those using flattappet cams. Royal Purple
has addressed this issue by
developing a new engine
break-in oil. Royal Purple
Break-in Oil is formulated
to allow optimal ring
seal and protect rotating
assembly components
such as the camshaft and
valve train from initial
start up wear. Royal Purple
combines highly refined
mineral oil, preferred for
engine break-in, with advanced additives containing
high levels of zinc and phosphorus to optimize
protection in flat-tappet and roller engines. Royal
Purple Break-in Oil is fully formulated and does
not require the use of any other chemical additives.
Royal Purple recommends using their high
performance motor oils after the engine is broken in
for maximum engine performance.
RP11487 quart ...................................... 9.99 ea
RP11497 case of 12 .............................. 94.99 cs
Oils & Lubricants
433
Engines & Components K
Engine Assembly Grease
Used by Joe Gibbs Racing during the assembly of
every NASCAR Sprint Cup and Nationwide Series
engine. This unique formula completely dissolves in
oil and can be applied to ring lands in order to prevent
micro welding during initial break-in. This assembly
grease, combined with the Joe Gibbs BR break-in oil
(P/N's BR106 or BR107), provides proven protection
during break-in.
AG728 1 pound can .............................. 21.99 ea
AG732 1 oz tube ................................. 2.99 ea
Your body has a
blood type-- does it
surprise you that your
car does, too? Just
like the wrong blood
type isn't good for
your body, the wrong
oil isn't good for your
engine. Modern oils
have had to reformulate
again and again to
adapt to evolving
engine technologies
and don't have the
proper formulation and
additives to protect older engines. Now, there's
Z-Alt Muscle Car oil. Refined from 100% pure
petroleum-based stock, Z-Alt Muscle Car Oil
is engineered with the perfect amount of ZDDP
additive and detergents for pre-1975 gasoline
car and truck engines, especially with flat-tappet
cams. Then, Z-Alt is treated with Infuzed-Moly
technology that allows it to penetrate your engine
and protect its internal metal surfaces, ensuring
longevity and performance from your valuable
older engine. Z-Alt comes in vintage-style cans for
a look that's as appropriate for your musclecar as its
formulation. Z-Alt has no chlorine, no teflon and no
solvents.
10W-30
Z1030
1 Quart ................................ 9.99 ea
Z1030CS
6 Quart Case........................ 53.99 ea
20W-50
Z2050
1 Quart ................................ 9.99 ea
Z2050CS
6 Quart Case........................ 53.99 ea
Royal Purple Motor Oil delivers
superior protection and
improves performance
in four-cycle
gasoline and
diesel engines.
It increases
horsepower and
torque, saves
fuels and reduces
heat, wear and
emissions. It
has unsurpassed
oxidation stability
that allows for
extended oil drains
and fewer oil
changes, which
saves you time and
money and reduces
the impact on the
environment. Royal
Purple’s motor oils for passenger cars and trucks
are API licensed. Royal Purple’s performance
advantages come from a blend of synthetic oils plus
Royal Purple’s proprietary Synerlec technology.
Royal Purple Motor Oil is compatible with other
mineral and synthetic motor oils.
Quarts
RP01030 SAE30 quart......................... 11.99 ea
RP01520 5W20
quart......................... 9.99 ea
RP01530 5W30
quart......................... 9.99 ea
RP01130 10W30 quart......................... 9.99 ea
RP01140 10W40 quart......................... 9.99 ea
RP01250 20W50 quart......................... 9.99 ea
5 Quart Bottles
RP51520 5W20
5 quarts .................... 47.99 ea
RP51530 5W30
5 quarts .................... 47.99 ea
RP51130 10W30 5 quarts .................... 47.99 ea
Cases
RP12030 SAE30 case of 12 quarts ..... 129.99 cs
RP12520 5W20
case of 12 quarts ..... 107.99 cs
RP54520 5W20
case of 4-5 quarts ... 188.99 cs
RP12530 5W30
case of 12 quarts ..... 107.99 cs
RP54530 5W30
case of 4-5 quarts ... 188.99 cs
RP12130 10W30 case of 12 quarts ..... 107.99 cs
RP54130 10W30 case of 4-5 quarts ... 188.99 cs
RP12140 10W40 case of 12 quarts ..... 107.99 cs
RP12250 20W50 case of 12 quarts ..... 107.99 cs
MSD Performance Ignition
MSD Pro-Billet Distributors
These distributors feature
a lightweight CNCmachined 6061-T-6 billet
aluminum housing and a
polished, coated steel shaft
to produce a low-friction
durable finish that resists
corrosion. MSD uses a
sealed ball bearing at the
top of the housing and an
extra long sintered bushing
at the bottom to guide and
control the shaft smoothly
and accurately up to 10,000+
rpm. Other features include
an iron drive gear, Rynite®
distributor cap with brass
terminals and a high output
magnetic pickup to trigger
the ignition. Choose from
the “standard” Pro-Billet
distributors that use the
MSD 6, 7, 8 or 10 series ignition control box or from
the internally controlled “ready-to-run” distributors.
Note: No further discounts apply.
“Standard” Pro-Billet Distributors
For MSD 6, 7, 8 or 10 series ignition.
1960-76 Chrysler 273, 318, 340, 360 ci
85341 with mechanical advance ............ 269.99 ea
1960-76 Chrysler 383, 400 ci
85451 small diameter, mechanical adv. 349.99 ea
1970-76 Chrysler 426, 440 ci
8546
small diameter, mechanical adv. 349.99 ea
“Ready-to Run” Pro-Billet Distributors
Ready-to-run distributors are designed as a plug-n-play
distributor. No external ignition control box is needed.
Optional vacuum advance is included in select units
and can be used at your discretion.
1960-76 Chrysler 273, 318, 340, 360 ci
8388
w/vacuum advance ................... 396.99 ea
8504
Digital E-Curve w/adj. timing. 499.99 ea
1960-76 Chrysler 383, 400 ci
8386
w/vacuum advance .................. 429.99 ea
1970-76 Chrysler 426, 440 ci
8387
w/vacuum advance .................. 429.99 ea
Replacement Parts For MSD Distributors
K
Engines & Components
Replacement parts for MSD Pro-Billet
Distributors.
1960-76 Chrysler 273-440
8433 dist. cap for 85431, 8388, 8504....... 31.99 ea
8433 dist cap for 8386, 8387............... 31.99 ea
8431 dist. cap for 85451, 8546. ................ 34.99 ea
8467 rotor for 85431, 85451, 8546, 8388. 9.99 ea
8467 rotor for 8386, 8387 & 8504............ 9.99 ea
MSD Noise Filter
If you experience
radio noise after
installing the
MSD Ignition,
you may need to
install an MSD
Noise Filter. Electro
Magnetic Interference (EMI)
is occasionally generated from the
MSD power cables and can be easily eliminated by
installing the Noise Filter on the heavy power supply
wires coming from the MSD. It is recommended
that the Noise Filter be used on installations with
the MSD 7 and 8 Series Ignitions to prevent this
interference. Includes noise filter cover.
Note: No further discounts apply.
8830
434
MSD noise filter w/cover .......... 39.99 ea
Performance Ignition
8920
8910E
6201
MSD Tachometer Adapter
MSD tach adapters will correct the operation of most
voltage triggered tachometers or fuel injection systems
that do not work directly off the tach output terminal of
the MSD ignition unit. If you are triggering an MSD
Blaster, 5, 6, SCI, or 7 series ignition with its white
wire or points terminal, you will need item # 8910 or
8910E. For applications using green and violet wires
for magnetic pickup input, use item # 8920.
Important: *For non-current limiting ignitions, originally
equipped with a ballast resistor. ** For use on current
limiting ignitions, not originally equipped with a ballast
resistor.
Note: No further discounts apply.
8910*
points or amplifier ................... 44.99 ea
8910E** points or amplifier ................... 54.99 ea
8920
magnetic pickup ...................... 69.99 ea
MSD Ignition
System Coils
If you are looking to
upgrade your stock coil
or want to complement
the performance of
your MSD 6 Series
Ignition, our Blaster
Coils are the right
choice. The following
Blaster Coils share
the same special
windings and high
voltage output as the other Blaster 2 coils, but do
not include a ballast resistor. When you are using an
MSD Ignition Control, the ignition is responsible
for delivering the voltage to the coil so a ballast
is not necessary. The Blaster 3 Coil features an
extra tall tower design to improve the coil wire
attachment and spark isolation and is supplied with
a 90º terminal and boot.
6425
MSD Digital 6A/6AL Ignition Control
MSD's new Digital 6A is the base model of the
capacitive discharge multiple spark 6 Series design.
Same footprint as the traditional 6A and 6AL but with
a lower profile for a sleek look. Like all of the MSD 6
Series Ignitions, the 6A will work with virtually any
vehicle as long as it has a 12-18 volt electrical system.
It can be triggered using breaker points, a magnetic
pickup or the output of an electronic amplifier. All
necessary parts and wiring instructions are included.
Will work on 4, 6 and 8 cylinder engines. The new
Digital 6AL shares the same proven circuitry of the
Digital 6A with the addition of a built-in adjustable
rev limiter with two top mounted rotary dials. The
combination of powerful sparks with the safety of a
rev control is what makes the Digital 6AL the most
popular ignition control in the world.
Note: No further discounts apply.
6201
6425
all V8 ..................................... 219.99 ea
all V8 with rev limiter ........... 279.99 ea
Note: No further discounts apply.
8202
8223
Blaster 2 ................................... 49.99 ea
Blaster 3 ................................... 49.99 ea
Blaster Performance Coil
With a stock points
style ignition, a
ballast resistor must
be placed in-line
with the positive
terminal of the
coil. The following
Blaster Coils are
supplied with a 0.8
ohm ballast resistor
plus a terminal and
boot to fit most
applications. Mallory
Unilite applications
also require the ballast
resistor. Available in chrome or red
Blaster SS Coil
The efficient E-core windings are designed to produce
high amounts of current without sacrificing the voltage
output. In fact, when used with an MSD 6 Series Ignition,
the Blaster SS produces 300 milliamps with a maximum
voltage output of 40,000 volts. The secondary windings
are wound on a segmented bobbin which reduces the
chance of voltage breakdown between the primary
and secondary windings. For more protection, these
windings are encased in a polyurethane compound for
complete protection against vibration. The Blaster SS
features brass terminals and a sturdy Rynite housing.
It is supplied with a 90º boot, terminal and vibration
mounts.
Important: The ballast is not necessary if an MSD 6 or
7 series ignition control is being used with the points
distributor.
Note: No further discounts apply.
8200
8203
Blaster 2 chrome ..................... 49.99 set
Blaster 2 red ............................ 54.99 set
Note: No further discounts apply.
8207
Blaster SS Coil ......................... 49.99 ea
Toll Free Order Line 800.854.1280
Performance Ignition
MN2519
35051
Universal Super Conductor wires
shown with multi-angle boots
2-In-1 Universal Wire Sets
3506
3507
These universal spark plug wires sets are made from
MSDs Super Conductor performance wire. Universal
wire sets have only the spark plug boot and terminal
installed. These boots and terminals are available in
your choice of a 90º boot or a multi-angle boot. The
distributor end boots and terminals are supplied, but
not crimped on. Both sets include terminals for engines
with either the early style (socket) and late style (HEI)
distributor caps. The wires are extra long so they can
be cut to fit any application. Each set includes a MSD
Mini-Stripper crimper for easy installation. Available
with wires in either black or red.
3508
Note: No further discounts apply.
3510
Pro-Crimp Tool
The Pro-Crimp features interchangeable jaws allowing
for a variety of different style crimps with one heavy
duty tool. The Pro-Crimp features a hardened steel
frame with comfortable molded hand grips. The
slick ratchet action provides secure, factory quality
crimps every time. The Tool is supplied with precision
crimping/stripping jaws for MSD’s spark plug wire
terminals.
90º Angle
31233
black .........................................
31239
red.............................................
Multi Angle
31193
black .........................................
31199
red.............................................
MN2520
Pro-Billet Electronic Distributor
Pro-billet electronic distributor for small or big block
engines. Does not include vacuum advance. TSP Pro
Billet distributors can be used with any brand CDI
box and has a universal butt connector for easy plug
and play.
Note: Requires the use of a CD ignition box.
99.99 set
99.99 set
MN2519
MN2520
318, 340 & 360 .................... 129.99 ea
413, 426 & 440 .................... 129.99 ea
94.99 set
94.99 set
Note: No further discounts apply.
Pro-Crimp Tool
35051
Pro-Crimp tool II ......................
Replacement Dies
3506 Amp pin terminal dies .................
3507 Amp lug terminal dies .................
3508 Plug wire terminal dies ................
3509 Weathertight terminal dies ...........
3510 Deutsch terminal dies ..................
74.99 ea
29.99
29.99
26.99
39.99
39.99
ea
ea
ea
ea
ea
MN2517
Pro-Clamp Spark Plug Wire Separators
The MSD Pro-Clamp will keep the plug wires in a
tidy order and away from engine heat sources. Each
Separator features secure grooves for each wire and
a top bracket snaps in place to sandwich the wires in
place. Each base has a hole for a retaining screw if
desired and a tab that will help hold it in position. The
kit is supplied with two 4-wire separators, two 3- wire
separators and four 2-wire separators.
Note: No further discounts apply.
8843
Mopar V8 HEI Electronic Distributor
High quality brass terminals and a protective plastic
dust cover that encapsulates the 65,000-volt coil.
A new cast-aluminum housing featuring a machine
polished finish contains new bushings, mainshaft
assembly, and a hardened steel gear. Our HEI includes
high-output module, centrifugal advance components,
and adjustable vacuum advance canister. For use up
to 7,000 RPM.
MN2517 318, 340 & 360 .................... 99.99 ea
Pro-Clamp separators ............... 19.99 set
Important: * 18" long, straight female socket coil terminal
and boot on one side with a straight female socket
distributor cap socket terminal and boot on the other.
** 18" long, 90º male coil terminals and boots are installed
on both sides to connect to an HEI style terminal. A
terminal adapter is also supplied to adapt to a female
socket style distributor cap.
Note: No further discounts apply.
84049* 8.5mm Super Conductor .......... 14.99 ea
84039** 8.5mm Super Conductor, red .. 14.99 ea
84033** 8.5mm Super Conductor, black 14.99 ea
MSD’s Spark Guard is
a dielectric grease that
solves many common
ignition troubles. It stops
voltage leaks, eases
boot removal, prevents
moisture buildup inside
the spark plug wire boots,
and even helps protect
against radio noise
(EMI). It also simplifies
the installation of MSD
Universal Spark Plug
Wire Sets. Spark Guard
will not dry up or harden
so it will retain its spark
isolating capabilities indefinitely.
Note: No further discounts apply.
8804
spark guard .................................. 15.99 ea
MN2521
Mopar V8
“Ready to Run” Electronic Distributor
Our Ready to run distributors have machine polished
aluminum housing with an adjustable vacuum advance
along with a simple 2-Wire hook up and brass bushings.
This unit features an improved high performance
module for use up to 7000 RPM and chrome moly
steel gear. Requires the use of an external coil.
MN2521 318, 340 & 360 .................... 129.99 ea
MN2522 413, 426 & 440 .................... 129.99 ea
Performance Ignition
435
Engines & Components K
Spark Guard
Coil Wires
If you’re changing a coil or cap to a new design, you
could find yourself searching for different terminals
for the coil wire. MSD offers these two style coil
wires to make the change easy. Also, remember that
the coil wire sees eight times the use of each plug wire
so changing the coil wire as a maintenance through
the race season is recommended.
Mallory Performance Ignition
Say Hello to Performance With Mallory Distributors!
Performance for Every Price Level and Engine/Ignition Combination!
Series 32 Magnetic
Breakerless Ignition
Series 57 Magnetic
Breakerless Ignition
These Series
32 distributors
use Mallory’s
Magnetic Breakerless
Ignition triggering system,
an adjustable mechanical
advance, and a steel
distributor gear. The CNCmachined billet housings
feature ball bearing and
bushing shaft support for
stability at any RPM, while
the 208 (HEI style) cap
resists cross-fire.
These Series 57
distributors use
Mallory’s Magnetic
Breakerless Ignition
triggering system, a
Mallory Super-Duty
(points style) cap
with brass terminals,
a steel distributor
gear, an adjustable
mechanical
advance, and a
vacuum advance. A
lockout plate allows
operation strictly
on mechanical advance. The CNC-machined
billet housings feature ball bearing and bushing
shaft support for stability at any RPM. Simple,
3-wire hookup makes installation easy. Use with a
capacitive discharge ignition system for even more
power.
Note: Requires capacitive discharge
ignition system for operation. No further
discounts apply.
3257711
3257811
3257911
1958-78 B engines.............. 279.99 ea
1959-79 RB engines ........... 279.99 ea
1965-95 LA engines ........... 279.99 ea
Series 42 Magnetic
Breakerless Ignition
These Series
42 distributors
use Mallory’s
self-contained
Magnetic Breakerless
Ignition system, a steel
distributor gear, an
adjustable mechanical
advance, and a
vacuum advance.
A lockout plate
allows operation strictly on
mechanical advance. The CNCmachined billet housings feature ball
bearing and bushing shaft support for
stability at any RPM, while the 208
(HEI style) cap resists cross-fire.
Note: Requires capacitive discharge
ignition system for operation. No further
discounts apply.
4257711
4257811
4257911
1958-78 B engines.............. 314.99 ea
1959-79 RB engines ........... 314.99 ea
1965-95 LA engines ........... 299.99 ea
K
Engines & Components
Series 50 Magnetic
Breakerless Ignition
These Series
50 distributors
use Mallory’s
Magnetic Breakerless Ignition
triggering system, a steel
distributor gear, an adjustable
mechanical advance, and a
Mallory Super-Duty (points
style) cap with brass terminals.
The CNC-machined billet
housings feature ball bearing
and bushing shaft support for
stability at any RPM. Simple,
3-wire hookup makes installation
easy. Use with a capacitive
discharge ignition system for even
more power.
Note: No further discounts apply.
5057801
5057701
5057901
436
1959-79 RB engines ........... 429.99 ea
1958-78 B engines.............. 449.99 ea
1965-93 LA engines ........... 429.99 ea
Performance Ignition
Unilite Electronic Ignition
Note: No further discounts apply.
5757801
5757701
5757901
1959-79 RB engines ........... 429.99 ea
1958-78 B engines.............. 449.99 ea
1965-93 LA engines ........... 429.99 ea
Electronic ignition
with a one-piece
self-contained
optical pickup and
module. Utilizes easy
3-wire hookup and
adjustable mechanical
or mechanical and
vacuum advance.
Includes Mallory
Super-Duty Cap (points style)
and rotor with brass terminals.
Can be used alone or with high
performance coil. Add mode
power with a CD ignition system.
Important: Vacuum advance models
50 state legal EO# D70-6 & D70-9
Note: No further discounts apply.
Vacuum Advance
4757801 1959-79 RB engines ...........
4757701 1958-78 B engines..............
4757901 1965-93 LA engines ...........
Mechnical Advance
3757801 1959-79 RB engines ...........
3757701 1958-78 B engines..............
3757901 1965-93 LA engines ...........
4562201 1960-80 Slant 6 engines .....
Mechnical Advance with Tach Drive
3857801 1959-79 RB engines ...........
369.99 ea
364.99 ea
369.99 ea
349.99
364.99
339.99
399.99
ea
ea
ea
ea
519.99 ea
Series 75 HEI Distributor
This Mallory
distributor
features steel
gears, fully-adjustable
advance, and a CNCmachined billet housing with
ball bearing and bushing
shaft support. It includes
a high-output GM-style
module with built-in
digital rev limiter, a 57,000
volt coil, and a Super Duty distributor
cap with brass contacts, all with a
simple, 1-wire hookup.
605
208M
Mallory Breakerless Distributor Parts
Need to tune-up your Mallory breakerless distributor?
Choose from the parts listed below.
Note: Will not fit A-Body models.
No further discounts apply.
7557901C
1965-95 .............................. 429.99 ea
Note: No further discounts apply.
Module
605
all series (except 42, 50 & 57)
M609
42, 50 & 57 series ...................
Distributor Cap
208M
HEI style, all 8 cyl series ........
209M
all 8 cyl. series .......................
270
all 6 cyl. series .........................
Distributor Rotor
304
32 series...................................
307M
42 series...................................
335
37 & 38 series .......................
322
47 series 8 cyl. .........................
309
50 series...................................
310
57 series...................................
Distributor Cap & Rotor
2092M all 8 cyl.(exc. 50 & 57 series)
2091M 50 & 57 series 8 cyl.................
Harness
29349
all series...................................
Mechanical Advance
29014
YH and YT series ....................
Vacuum Advance
29332
47 & 57 series ........................
Wire retainer
29314
fits 205/208 cap .......................
89.99 ea
89.99 ea
35.99 ea
21.99 ea
24.99 ea
14.99
9.99
12.99
14.99
6.99
6.99
ea
ea
ea
ea
ea
ea
34.99 set
24.99 set
14.99 ea
33.99 ea
34.99 ea
19.95 ea
Dual Point Ignition
Economical
Dual Point
Ignition
distributors have heavy duty
dual points for increased RPM
range and coil output. Choose
from mechanical advance or
vacuum advance models. A
mechanical advance model with
mechanical tach drive output
is available for those running a
mechanical tach.
Note: No further discounts apply.
Mechanical Advance
2557801 1959-79 RB engines ...........
2557701 1958-78 B engines..............
2557901 1965-93 LA engines ...........
Vacuum Advance
2757801 1959-79 RB engines ...........
2757701 1958-79 B engines..............
Mechanical Advance - Tach Drive
2657701 1958-79 B engines..............
359.99 ea
344.99 ea
344.99 ea
399.99 ea
399.99 ea
469.99 ea
Toll Free Order Line 800.854.1280
Performance Ignition
400
209M
Mallory Breaker Point Distributor Parts
MN2270
MN2246
Need to tune-up your Mallory breaker point distributor?
Choose from the parts listed below.
Note: No further discounts apply.
Performance Points
25042X all series ...................................
Condenser
400
all series (except 27) ................
401
27 series ...................................
Distributor Cap
209M
all 8 cyl. series ..........................
270
all 6 cyl. series ..........................
Distributor Rotor
309
all series (except 27) ................
310
27 series....................................
Distributor Cap & Rotor
2091M all 8 cyl. series ..........................
Vacuum Advance
29332
27 series....................................
17.99 ea
7.99 ea
7.99 ea
21.99 ea
24.99 ea
6.99 ea
6.99 ea
24.99 set
34.99 ea
Mallory Tachometer Adapter
Some applications with
a tachometer need a
voltage spike signal
from the negative side
of the coil before they
will operate properly.
This signal changes
when a high inductive
storage or capacitive
discharge electronic ignition control is installed.
The tachometer adapter develops a voltage spike
that will run most voltage triggered tachometers
and current (series) triggered tachometers. The
tachometer adapter works with any inductive
storage or capacitive discharge electronic ignition
control triggered by points or electronic amplifier
trigger. For vehicles w/inductive or capacitive
discharge for factory style tach.
Note: No further discounts apply.
29078
for Mallory ignition modules ..... 151.99 ea
Note: No further discounts apply.
29099
29101
29102
blue ........................................... 32.99 set
red............................................. 34.99 set
black ......................................... 34.99 set
Spark Plug Wire Markers
Numbered shrink sleeving for marking cylinder
numbers on spark plug wires.
Note: No further discounts apply.
28797
black .........................................
7.99 ea
Flame Thrower/Ignitor III
Plug N Play Billet Distributors
Plug ‘n play billet distributors are designed for
maximum performance and easy installation at an
affordable price. Replace your outdated points or
electronic distributor with this race proven unit.
Features patented Ignitor III electronics and CNC
machined 6061 T-6 billet housing. Fits Mopar models
with small block or big block engines.
Important: Due to variances in 440 cylinder head castings,
some cylinder heads may require grinding for adequate
distributor clearance. Will not fit wedge engines with
aftermarket heads.
Note: Distributors can not be used with solid core ignition
wires. Non vacuum advance distributors do not have an
E.Q. number and are not legal for sale or use on pollution
controlled vehicles.
Important: Due to variances in 440 cylinder head castings,
some cylinder heads may require grinding for adequate
distributor clearance. Will not fit wedge engines with
aftermarket heads.
Note: Distributors can not be used with solid core ignition
wires. Non vacuum advance distributors do not have an
E.Q. number and are not legal for sale or use on pollution
controlled vehicles.
Small Block Engines
With Vacuum Advance
Black Cap
MN2270 female terminals ..................... 254.99
MN2272 male terminals ........................ 259.99
Red Cap
MN2271 female terminals ..................... 254.99
MN2273 male terminals ........................ 259.99
Without Vacuum Advance
Black Cap
MN2274 female terminals ..................... 254.99
MN2276 male terminals ........................ 259.99
Red Cap
MN2275 female terminals ..................... 254.99
MN2277 male terminals ........................ 259.99
383, 400 Big Block Engines
With Vacuum Advance
Black Cap
MN2278 female terminals ..................... 254.99
MN2280 male terminals ........................ 259.99
Red Cap
MN2279 female terminals ..................... 254.99
MN2281 male terminals ........................ 259.99
Without Vacuum Advance
Black Cap
MN2282 female terminals ..................... 254.99
MN2284 male terminals ........................ 259.99
Red Cap
MN2283 female terminals ..................... 254.99
MN2285 male terminals ........................ 259.99
413, 426, 440 Big Block Engines
With Vacuum Advance
Black Cap
MN2286 female terminals ..................... 254.99
MN2288 male terminals ........................ 259.99
Red Cap
MN2287 female terminals ..................... 254.99
MN2289 male terminals ........................ 259.99
Without Vacuum Advance
Black Cap
MN2290 female terminals ..................... 254.99
MN2292 male terminals ........................ 259.99
Red Cap
MN2291 female terminals ..................... 254.99
MN2293 male terminals ........................ 259.99
Small Block Engines
With Vacuum Advance
Black Cap
MN2246 female terminals ..................... 274.99
MN2248 male terminals ........................ 279.99
Red Cap
MN2247 female terminals ..................... 274.99
MN2249 male terminals ........................ 279.99
Without Vacuum Advance
Black Cap
MN2250 female terminals ..................... 269.99
MN2252 male terminals ........................ 279.99
Red Cap
MN2251 female terminals ..................... 269.99
MN2253 male terminals ........................ 279.99
383, 400 Big Block Engines
With Vacuum Advance
Black Cap
MN2254 female terminals ..................... 269.99
MN2256 male terminals ........................ 279.99
Red Cap
MN2255 female terminals ..................... 269.99
MN2257 male terminals ........................ 279.99
Without Vacuum Advance
Black Cap
MN2258 female terminals ..................... 269.99
MN2260 male terminals ........................ 279.99
Red Cap
MN2259 female terminals ..................... 269.99
MN2261 male terminals ........................ 279.99
413, 426, 440 Big Block Engines
With Vacuum Advance
Black Cap
MN2262 female terminals ..................... 269.99
MN2264 male terminals ........................ 279.99
Red Cap
MN2263 female terminals ..................... 269.99
MN2265 male terminals ........................ 279.99
Without Vacuum Advance
Black Cap
MN2266 female terminals ..................... 269.99
MN2268 male terminals ........................ 279.99
Red Cap
MN2267 female terminals ..................... 269.99
MN2269 male terminals ........................ 279.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
Performance Ignition
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
437
Engines & Components K
High Temperature Wire Divider Kits
Each kit contains two 4-hole brackets, two 3-hole
brackets, and two 2-hole brackets.
Flame Thrower/Ignitor II
Plug N Play Billet Distributors
Plug ‘n play billet distributors are designed for
maximum ignition performance and easy installation
at an affordable price. Replace your outdated points
or electronic distributor with this race proven unit.
Features patented Ignitor II electronics and a CNC
machined 6061 T-6 billet housing. Fits Mopar models
with small block or big block engines.
Performance Ignition
Ignitor shown
here installed
by
Pertronix
PX1382
30 Month
Limited
Warranty
• Increases Horsepower and Fuel Economy.
• Easily Installed in Minutes.
• Legal in all 50 States and Canada.
• 30 Month Warranty
Eliminate points and wear-prone moving parts while
delivering twice the stock voltage to the spark plugs.
The Ignitor fits completely inside the distributor with
no complex wiring, leaving no unsightly black box to
clutter up your engine compartment. Use with Flame
Thrower 40,000 volt coil for optimum performance.
Note: MN2240, MN2242 are with factory electronic
ignitions, excluding lean burn computer controlled engines.
6 Cylinder
MN2239
MN2240
8 Cylinder
MN2241
MN2242
1960-72 6 cylinder ........... 79.99 set
1973-76 6 cylinder ........... 99.99 set
1968-73 340 Six Pack ...... 79.99 set
1972-76 8 cylinder all ...... 89.99 set
• Increases Horsepower and Fuel Economy.
• Matches dwell to RPM
• Easily Installed in Minutes.
• Legal in all 50 States and Canada.
• 30 Month Warranty
The Ignitor II detects electrical current in the coil
and uses a micro controller to increase or decrease
dwell to maintain peak energy as RPM and operating
conditions change, providing more energy, reducing
misfires, and improving engine performance. Produces
nearly 4 times more available energy between 3000 and
5000 RPM, and double the available plug voltage! Use
with the new Flame-Thrower II super low resistance
(0.6 ohms) 45,000 volt coil to maximize high RPM
performance.
Note: Ignitor II can not be used with solid core ignition
wires. MN2244 and MN2245 are for factory ignition
excluding lean burn computer controlled engines,
PX91381A is for single point applications only.
K
Engines & Components
6 Cylinder
MN2243
MN2244
8 Cylinder
PX91381A
MN2245
1960-72 6 cylinder ............. 109.99 set
1973-76 6 cylinder ............. 119.99 set
1964-74 8 cylinder ............. 109.99 set
1972-76 8 cylinder ............. 119.99 set
• Ignition Box Inside Distributor.
• Adaptive Dwell Maintains Peak Energy
• Increases Horsepower, Fuel Economy.
• Legal in All 50 States and Canada.
• 30 Month Warranty
The Ignitor III is the most advanced points replacement
set available. Featuring multiple sparks throughout the
RPM range and an adjustable REV limiter accurate to
+/- 50 RPM, Ignitor III generates 5 times more spark
than points maintains peak energy, reduces misfire,
and improves engine performance throughout the RPM
range. Peak current is reached just prior to spark for
maximum energy without heat build-up, increasing
performance and reliability. Fits Chrysler aluminum
bodied single point distributors with vacuum advance.
Note: Not available for 6 cylinder.
PX71381A 1960-72 .............................. 129.99 set
438
Performance Ignition
Pertronix Ignitor Series Ignition Modules
PX45001
PX45011
Flame Thrower Performance Coils
Complete your ignition upgrade with a Flame Thrower
high performance coil. Best when used with the Ignitor
Electronic Ignition Conversion, the Flame Thrower
Hi Performance Coil fits existing coil brackets for
a clean, factory look. Enables larger plug gaps for
greater fuel efficiency & more power. Available with
either a chrome or black finish. Choose from a variety
of voltages and primary resistance ratings.
40,000 Volt Coil - 1.5 & 3.0 ohm
These Flame Thrower coils are compatible with breaker
point ignition systems or vehicles equipped with the
original Ignitor system. Choice of 6 cyl or 8 cyl.
Chrome Oil Filled
PX40501 6 cyl 3.0 ohm .................... 34.99 ea
PX40001 8 cyl 1.5 ohm .................... 34.99 ea
Black Oil Filled
PX40511 6 cyl 3.0 ohm .................... 34.99 ea
PX40011 8 cyl 1.5 ohm .................... 31.99 ea
Black Epoxy Filled
PX40611 6 cyl 3.0 ohm .................... 39.99 ea
PX40111 8 cyl 1.5 ohm .................... 39.99 ea
45,000 Volt Coil - 0.6 ohm
The Flame Thrower II coils are for use on vehicles
equipped with the Ignitor II system.
Chrome Oil Filled
PX45001 4, 6 or 8 cylinder.................... 44.99 ea
Black Oil Filled
PX45011 4, 6 or 8 cylinder.................... 34.99 ea
Black Epoxy Filled
PX45111 4, 6 or 8 cylinder.................... 44.99 ea
45,000 Volt Coil - 0.32 ohm
The Flame Thrower III coils are for use on vehicles
equipped with the Ignitor III system.
Chrome Oil Filled
PX44001 8 cylinder .............................. 44.99 ea
Black Oil Filled
PX44011 8 cylinder .............................. 39.99 ea
Ignitor Electronic Ignition Module
Eliminates points and moving parts that wear out while
delivering twice the voltage to spark plugs. Increase
horsepower, fuel economy, and plug life. Concealed
entirely within the distributor. Easily installs in minutes
with no complex wiring. Compatible with negativeground 12-volt systems and is legal in 50 states and
Canada. 30-month warranty included.
Single Point Vacuum Advance Only
PX1381A
1960-72 ............................... 74.99 set
Dual Point Vacuum Advance Only
PX1382
1964-71 B/RB & Hemi .... 79.99 set
MN2202
Flame Thrower HV 60,000 Volt Coils
The Flame Thrower HV
(high voltage) coils
have an E-Core
design which is rated
at a sizzling 60,000
volts and operates
with no degradation
of energy throughout
the temperature
ranges. Made from
6063 T5 aluminum,
it efficiently transfers
PX60130
heat to optimize energy
output, and the housing is black
anodized for increased corrosion resistance.
Available in 3 different resistances for compatibility
with most points and electronic ignition systems.
Standard threaded connections and mounting
hardware are included.
PX60104 0.45 ohm ............................... 69.99 ea
PX60115 1.5 ohm ................................. 69.99 ea
PX60130 3.0 ohm ................................. 69.99 ea
MN2205
Remanufactured Distributors
These remanufactured distributors feature high
performance advance curves and adjustable vacuum
advance units. No exchange or core required. Cap and
rotor not included.
Single Points W/Single Vacuum
273, 318, 340, 360 Engines
MN2202 1961-72 ................................ 79.99 ea
361, 383, 400 Engines
MN2203 1961-72 ................................ 49.99 ea
413, 426, 440 Engines
MN2204 1961-72 ................................ 109.99 ea
Electronic Ignition W/Single Vacuum
400 Engines
MN2206 1972-76 ................................ 54.99 ea
440 Engines
MN2205 1972-78 ................................ 79.99 ea
Toll Free Order Line 800.854.1280
Ignition Components
CR100
CR114
1972-76 Replacement Electronic Ignition Control Modules
Ignition control module replacement unit for 1972-76 Mopar A, B and E-body models.
CR100
1972-74
electronic ignition ............................................ 31.99 ea
CR114
1975-76
electronic ignition ............................................ 36.99 ea
CR100
1976
electronic ignition ............................................ 31.99 ea
MN1113
MN1115
1960-71 Electronic Ignition Conversion Kits
Electronic ignition conversion set for 1960-71 Mopar engines. Includes electronic
ignition distributor with vacuum advance, two-wire ballast resistor, mopar “orange
box” ignition control module, and all necessary wiring and plugs. Complete bolt-on
electronic ignition conversion for engines with conventional points and condenser
ignition. Wiring modification is necessary on stock ignition wiring. Includes
complete wiring instructions.
MN1113
1960-71 conversion kit, small block ............................. 241.99 kit
MN1114
1960-71 conversion kit, 361, 383 or 400 ...................... 241.99 kit
MN1115
1960-71 conversion kit, 413, 426 or 440 ...................... 241.99 kit
Electronic Ignition Distributor
Electronic ignition distributors for all models with small block, big block or Hemi
engines. Each distributor is designed to function with factory electronic ignition
components including electronic ignition control units and external ballast resistor
and voltage regulator.
MN1105
383, 400 ............................................................................ 249.99 ea
MN2197
1964-72 Electronic Ignition Conversion Harness
This conversion harness will replace the point style engine harness when upgrading
to electronic ignition. Works with any electronic distributor and control unit. Requires
a 4 wire ballast resistor, electronic distributor, and control unit.
B-Body Models
MN2197
1964-72 all ..................................................................... 42.99 ea
E-Body Models
MN2197
1970-72 all ..................................................................... 42.99 ea
All Models, Mopar Performance
MN9906
1964-72 all engines, without pigtails ............................. 29.99 ea
MN2209
MN2210
Mopar Performance Electronic Ignition Control Units
Mopar Performance electronic control units are a culmination of years of high
performance ignition system development. Designed to outperform any ignition
unit previously offered to Mopar racers. Fits models with small block, big block,
and Hemi engines.
Note: *For race or off-road use only.
MN2209
MN2210
MN2211*
Orange box
Chrome box
Super Gold
up to 6,000 rpm ....................................... 53.99 ea
up to 8,000 rpm ....................................... 84.99 ea
up to 12,000 rpm ..................................... 215.99 ea
1969 A12 Road Runner
& Super Bee Ballast Resistor Wire
Ballast resistor wire for 1969-1/2 A12
package Road Runner and Super Bee
models with 440 6 bbl engines. Vehicles
with Six Packs had a different wiring
harness so these vehicles need this
extension harness while the other
models do not. This wire connects
from the ballast resistor to the coil.
MN2195
1969
440 6 bbl .......................................................... 34.99 ea
Ignition Components
439
Engines & Components K
1972-74 Electronic Control Unit Mounting Bracket
Electronic control unit mounting bracket for 1972-74 E-body models. This bracket
can also be used when upgrading to electronic ignition. Made from cadmium plated
steel as original. Made in USA.
MD4698
1972-74 E-body ............................................................. 34.99 ea
Ignition Components
Gold Quality Premium Ignition
OE Quality Ignition Components for
Electronic Ignition Systems Meet Components for Electronic Ignition
Systems are Manufactured with
or Exceed OEM Specs!
Professional Quality Materials!
MN1108
MN1112
1960-71 Ignition Point and Condenser Sets
CR904
CR902G
Gold Quality Distributor Caps & Rotors
CR903
CR902
Replacement Distributor Caps & Rotors
Applications are available to fit most 1972-76 A-body,
B-body and E-body vehicles with electronic ignition.
Rotors are manufactured in white polyester. Sets
include distributor cap and rotor.
1973-76 - 6 Cylinder
CR904 1973-76 distributor cap.......... 6.99 ea
CR903 1973-76 rotor ......................... 2.99 ea
CR2201 1973-76 set ............................ 8.99 set
1972-76 - 8 Cylinder
CR902 1972-76 distributor cap.......... 5.99 ea
CR903 1972-76 rotor ......................... 2.99 ea
CR2200 1972-76 set ............................ 7.99 set
Designed for high performance and with premium
quality compounds, these components are the ultimate
choice for trouble-free service and a longer component
life. When you want ignition components that are one
step above OE quality, go for the GOLD! Applications
are available to fit most 1972-76 A-Body, B-Body and
E-Body vehicles with electronic ignition.
1973-76 - 6 Cylinder
CR904G 1973-76 distributor cap ....... 12.99 ea
CR903G 1973-76 rotor ....................... 11.99 ea
CR2201G 1973-76 set .......................... 16.99 set
1972-76 - 8 Cylinder
CR902G 1972-76 distributor cap ....... 11.99 ea
CR903G 1972-76 rotor ....................... 11.99 ea
CR2200G 1972-76 set .......................... 14.99 set
Standard and Restorer’s Choice points and condenser
sets for most 1960-71 A-body, B-body and E-body
vehicles with V8 engines. Replacement points and
condensers meet or exceed OEM specifications.
Standard Points
AL1023 1961-71 dual points ............... 6.99 set
AL1044 1962-66 single points ............ 5.99 ea
Restorer’s Choice Points
MN1100 1960-63 dual points ............... 10.99 set
MN1108 1960-71 single points ............ 5.99 ea
Standard Condensers
Applications are available to fit most 1960-72 A-body,
B-body and E-body vehicles.
AL1531 1960-72 OEM ........................ 4.99 ea
Restorer’s Choice Condensers
MN1111 1962-71 dual points ............... 8.99 ea
MN1112 1962-72 single points ............ 6.99 ea
Max Wedge/Hemi Distributor Hold Down
Original style distributor hold down for 413 & 426 Max
Wedge engines and 436 Hemi engines. Manufactured
in the correct gauge steel and supplied unpainted as
original. Features original style notch for cross ram
intake manifold clearance. Made in the USA.
MN2865 ................................................. 44.99 ea
MD2394
K
Engines & Components
1960-76 Replacement Distributor Rotors
Distributor rotors for 1960-76 Mopar models with
single points ignition, dual points ignition or electronic
ignition. This distributor rotor is designed for use with
Autolite or Prestolite distributors.
MN1099 1960-71 dual points ............... 6.99 set
MD2394 1962-72 single points ............ 5.99 ea
MD2394 1973-76 electronic ignition.... 5.99 ea
MN1103
MN1102
1964-76 Distributor
Hold Down Brackets & Gaskets
MN11071
1962-76 Mopar Distributor Caps
Original-style Mopar distributor cap for various
Chrysler 8 cylinder engines.
1962-76 - 8 Cylinder
MN11071 1962-76 tan, std ignition ..... 14.99 ea
440
CR101W
CR102W
1972-76 Replacement Reluctors
Electronic ignition reluctor replacement unit for
1972-76 Mopar A, B and E-body 6-Cylinder and
8-Cylinder models.
CR101W 1973-76 6 cylinder .............. 3.99 ea
CR102W 1972-76 8 cylinder .............. 5.99 ea
Distributor Components
Protect yourself from unwanted timing changes! These
distributor hold down clamps prevent the distributor
from turning in the intake manifold, ensuring correct
timing under any condition. Each clamp set includes
the clamp, stud, nut and washer and features a 1 year
manufacturer’s warranty.
Distributor Hold Down Bracket
MN1102 1964-76 small block, chrome 14.99 ea
MN1103 1964-76 big block, chrome. ... 34.99 ea
Distributor Mounting Gasket
6464
1964-76 all engines................ 1.99 ea
Toll Free Order Line 800.854.1280
Ignition Components
Bronze Distributor Gears
CV3033
1961-76 Distributor Vacuum Advances
Note: Will not fit 1964-66 318A with polyspherical heads.
MN2124 1964-76 273-360 ................... 65.99 ea
MN2125 1960-76 383-400 ................... 69.99 ea
MN2125 1966-71 426 Hemi ................. 69.99 ea
Bronze Intermediate
Shaft Bushing
1962-76 OEM Reproduction Ignition Coil
Superior quality reproduction ignition coil for use with
all 6-cylinder and 8-cylinder Mopar models from 1962
through 1976. An exact reproduction of the original,
each ignition coil features the correct vintage Mopar
logo. If you're looking for maximum judging points
at the car show, this is the ignition coil you need for
a truly authentic appearance.
MN1118 1962-76 all engines................ 56.99 ea
Intermediate shaft bushings
support the distributor
intermediate shaft and are pressed
into the block. These aftermarket
bronze bushings are a significant
improvement over the factory aluminum units.
MN2184 1960-76 6 cyl & V8 .............. 8.99 ea
Original Style Intermediate
Shaft Bushing
Original Chrysler
distributor intermediate
shaft bushing for all
engines. This bushing supports the
intermediate shaft and is pressed into
the block. Made from steel.
MN2149 1960-76 V6 & V8 .................
1962-74 Replacement Ignition Coil
Service replacement ignition coil for the Chrysler
ignition coil, designed for use with all 1962-74 Mopar
models with a 6 cylinder or 8-cylinder engine with an
external ignition coil.
MN1117 1962-74 all engines................ 64.99 ea
9.99 ea
1969-70 Dual Point
Distributor Leads
Original style
reproduction dual
point distributor
leads with correct
logo and original
style terminal ends.
Made from heat
resistant wire with
resistance welded D-ring
terminal and has correct red
sleeve for coil mounting.
MN2194 1969-70 340 & 440 6 bbl .....
MN2193 1969-70 426 Hemi................
MD7577
49.99 ea
49.99 ea
MD7578
Chrome Vacuum
Advance Cover
MN1110
1960-76 Distributor Advance Components
Distributor Advance Weight Springs
These springs are used to convert a stock distributor
to a quick advance curve for enhanced performance.
Includes two springs.
MN1110 1960-76 advance springs. ...... 16.99 pr
Distributor Advance Curve Kit
This kit alters the spark and advance curve of your
distributors for maximum acceleration. An absolute
must for all high-performance engines. 1 year
manufacturer’s warranty.
T4450
1964-74 advance curve kit..... 3.99 kit
MD7579
Chrome plated steel cover that
slides over factory vacuum
advance units. Attaches with
double sided tape.
T4973
..................................................
1962-76 Coil Mounting Brackets
5.49 ea
Distributor Wire Grommet
Distributor wire grommet for all models
with standard ignition. This rubber
grommet shields the wire that runs from
the distributor to the ignition coil.
MD2395 all w/points ignition .................
4.99 ea
Secures the coil to the intake manifold for various
engines listed.
Small Block Engines
MD7577 1962-76 all except 6 BBL...... 18.99 ea
MD7578 1968-73 340 6 BBL bracket .. 31.99 ea
Big Block & Hemi Engines
MD7576 1962-74 all except 6 BBL...... 18.99 ea
MD7579 1968-71 440 6 BBL bracket .. 31.99 ea
Universal Fit Bottle Type Coil Brackets - Chrome
T9366
1962-76 bracket only ............. 14.99 ea
T9006
1962-76 bracket and cover .... 6.99 set
Vacuum Advances . Ignition Coils
441
Engines & Components K
The vacuum advance is a primary component in your
vehicle’s ignition system. Attached to the distributor,
the vacuum advance is a mechanism that moves the
breaker point or pick-up coil plate when it receives
vacuum generated by the engine. Applications are
available to fit most 1961-76 A-body, B-body and
E-body vehicles and replace OEM part numbers listed.
6 Cylinder
CV1135 1961-68 all 6 cylinder ............ 14.99 ea
CV3011 1969-72 all 6 cylinder ............ 17.99 ea
CV3030 1973-74 replaces #3755037 ... 14.99 ea
CV3030 1973-74 replaces #3755467 ... 14.99 ea
CV3029 1973-76 replaces #3755042 ... 19.99 ea
CV3029 1973-76 replaces #3755470 ... 19.99 ea
CV3029 1973-76 replaces #3874082 ... 19.99 ea
CV3029 1973-76 replaces #3874714 ... 19.99 ea
CV3029 1973-76 replaces #3874798 ... 19.99 ea
CV1176 1976
replaces #3874795 ... 15.99 ea
8 Cylinder
CV1135 1961-68 replaces #2098680 ... 14.99 ea
CV1135 1961-68 replaces #2098685 ... 14.99 ea
CV3008 1969-72 replaces #3438255 ... 24.99 ea
CV3008 1969-72 replaces #3656272 ... 24.99 ea
CV3015 1970-72 replaces #3438225 ... 14.99 ea
CV3015 1970-72 replaces #3438517 ... 14.99 ea
CV3015 1970-72 replaces #3656390 ... 14.99 ea
CV3028 1972-73 replaces #3656341 ... 21.99 ea
CV3028 1972-73 replaces #3656791 ... 21.99 ea
CV3028 1972-73 replaces #3656802 ... 21.99 ea
CV3028 1972-73 replaces #3755157 ... 21.99 ea
CV3031 1973-76 replaces #3656763 ... 17.99 ea
CV3031 1973-76 replaces #3656780 ... 17.99 ea
CV3031 1973-76 replaces #3874298 ... 17.99 ea
CV3031 1973-76 replaces #3874299 ... 17.99 ea
CV3031 1973-76 replaces #3874754 ... 17.99 ea
CV3031 1973-76 replaces #3874755 ... 17.99 ea
CV3033 1974
replaces #3755512 ... 17.99 ea
CV3033 1974
replaces #3755518 ... 17.99 ea
CV3033 1974
replaces #3755522 ... 17.99 ea
CV3033 1974
replaces #3755681 ... 17.99 ea
CV3032 1974-76 replaces #3755475 ... 18.99 ea
CV3032 1974-76 replaces #3755486 ... 18.99 ea
CV3032 1974-76 replaces #3874090 ... 18.99 ea
CV3032 1974-76 replaces #3874097 ... 18.99 ea
CV3032 1974-76 replaces #3874098 ... 18.99 ea
CV3032 1974-76 replaces #3874115 ... 18.99 ea
CV3032 1974-76 replaces #3874116 ... 18.99 ea
CV3032 1974-76 replaces #3874858 ... 18.99 ea
CV3032 1974-76 replaces #3874859 ... 18.99 ea
CV3032 1974-76 replaces #3874867 ... 18.99 ea
CV3032 1974-76 replaces #3874868 ... 18.99 ea
Bronze distributor gears
are the first requirement
when installing a steel
roller cam. Stock cast iron
gears are not compatible
with steel camshafts.
These are made from
an aluminum bronze
construction with 5%
nickel added. These fit
.484" diameter shaft. They
MN2125
feature a high-strength
tooth design that resist wear, even when used with
high pressure oil pumps.
Date-Coded Plug Wires
Correct date code based on
production quarter of the
vehicle
K
Engines & Components
1962-72 Model Year Date Coded Spark Plug Wires
Correct “Electronic
Suppression” wording on
plug wire jacket
Exact reproduction spark plug wire sets are manufactured to original specifications
and are correct in every aspect: wire type and length, color, terminals, boot angle
and shape, script, and braiding (where applicable). These reproduction sets are
identical to the spark plug wires as they would have appeared on the vehicle when it
shipped from the factory and are designed to look, fit and perform exactly as original.
Each wire features original style lettering with the wording “Chrysler Corporation
Electronic Suppression.” All wires are date coded based on the production quarter
of the vehicle. For cars built during the first half of production (September of the
preceding year through February of the car’s model year), choose “1Q”; For cars
built in the second half of production (March through August of the car's model
year), choose “3Q” dated wires.
Dodge & Plymouth Spark Plug Wires
1962 Model Year
MD4600 1962 318
3Q-61 ..................................................
MD4601 1962 318
1Q-62 ..................................................
MD4602 1962 361/383
3Q-61 except Max Wedge...................
MD4603 1962 361/383
1Q-62 except Max Wedge...................
1963 Model Year
MD4604 1963 361/383
3Q-62 except Max Wedge...................
MD4605 1963 361/383
1Q-63 except Max Wedge...................
MD4606 1963 318
3Q-62 .................................................
MD4607 1963 318
1Q-63 .................................................
1964 Model Year
MD4610 1964 318
3Q-63 ..................................................
MD4611 1964 318
1Q-64 ..................................................
MD4608 1964 361/383/426 3Q-63 except Max Wedge...................
MD4609 1964 361/383/426 1Q-64 except Max Wedge...................
1965 Model Year
MD4612 1965 6 cyl
3Q-64 ..................................................
MD4613 1965 6 cyl
1Q-65 ..................................................
MD4614 1965 318
3Q-64 ..................................................
MD4615 1965 318
1Q-65 ..................................................
MD4616 1965 273
3Q-64 .................................................
MD4617 1965 273
1Q-65 ..................................................
MD4618 1965 361/383/426 3Q-64 .................................................
MD4619 1965 361/383/426 1Q-65 ..................................................
1966 Model Year
MD4620 1966 6 cyl
3Q-65 ..................................................
MD4621 1966 6 cyl
1Q-66 ..................................................
MD4624 1966 273
3Q-65 ..................................................
MD4625 1966 273
1Q-66 ..................................................
MD4622 1966 318
3Q-65 ..................................................
MD4623 1966 318
1Q-66 ..................................................
MD4626 1966 361/383
3Q-65 ..................................................
MD4627 1966 361/383
1Q-66 ..................................................
MD4628 1966 Hemi
3Q-65 street ........................................
MD4629 1966 Hemi
1Q-66 street ........................................
1967 Model Year
MD4631 1967 6 cyl
3Q-66 ..................................................
MD4632 1967 6 cyl
1Q-67 ..................................................
MD4630 1967 273/318
3Q-66 ..................................................
MD4633 1967 273/318
1Q-67 ..................................................
MD4636 1967 383
3Q-66 ..................................................
MD4637 1967 383
1Q-67 ..................................................
MD4634 1967 440
3Q-66 ..................................................
MD4635 1967 440
1Q-67 ..................................................
MD4638 1967 Hemi
3Q-66 except RO23J/WO23J ............
MD4639 1967 Hemi
1Q-67 except RO23J/WO23J .............
MD4640 1967 Hemi
1-67 RO23J/WO23J ............................
MD4641 1967 Hemi
2-67 RO23J/WO23J ............................
MD4642 1967 Hemi
5-67 RO23J/WO23J ............................
1968 Model Year
MD4643 1968 6 cyl
3Q-67 ..................................................
MD4644 1968 6 cyl
1Q-68 ..................................................
MD4645 1968 273/318
3Q-67 ..................................................
MD4646 1968 273/318
1Q-68 ..................................................
MD4647 1968 383/440
3Q-67 ..................................................
MD4648 1968 383/440
1Q-68 ..................................................
MD4649 1968 Hemi
3Q-67 street.........................................
MD4650 1968 Hemi
1Q-68 street.........................................
Dodge & Plymouth Spark Plug Wires - Continued
1969 Model Year
MD4651 1969 6 cyl
3Q-68 .................................................. 61.99
MD4652 1969 6 cyl
1Q-69 .................................................. 61.99
MD4653 1969 318
3Q-68 .................................................. 78.99
MD4654 1969 318
1Q-69 .................................................. 78.99
MD4655 1969 383/440
3Q-68 .................................................. 78.99
MD4656 1969 383/440
1Q-69 .................................................. 78.99
MD4657 1969 Hemi
3Q-68 street......................................... 174.99
MD4658 1969 Hemi
1Q-69 street......................................... 174.99
1970 Model Year
MD4659 1970 6 cyl
3Q-69 .................................................. 61.99
MD4660 1970 6 cyl
1Q-70 .................................................. 61.99
MD4661 1970 318
3Q-69 .................................................. 78.99
MD4662 1970 318
1Q-70 .................................................. 78.99
MD4663 1970 383/440
3Q-69 .................................................. 78.99
MD4664 1970 383/440
1Q-70 .................................................. 78.99
MD4665 1970 Hemi
3Q-69 street......................................... 219.99
MD4666 1970 Hemi
1Q-70 street......................................... 174.99
1971 Model Year
MD4667 1971 6 cyl
3Q-70 all ............................................. 61.99
MD4668 1971 6 cyl
1Q-71 .................................................. 61.99
MD4669 1971 318/340
3Q-70 .................................................. 78.99
MD4670 1971 318/340
1Q-71 .................................................. 78.99
MD4671 1971 383/440
3Q-70 .................................................. 78.99
MD4672 1971 383/440
1Q-71 .................................................. 78.99
MD4673 1971 Hemi
3Q-70 street......................................... 174.99
MD4674 1971 Hemi
1Q-71 street......................................... 174.99
1972 Model Year
MD4675 1972 6 cyl
3Q-71 .................................................. 61.99
MD4676 1972 6 cyl
1Q-72 .................................................. 61.99
MD4677 1972 318/340
3Q-71 w/o Electronic Ignition ............ 78.99
MD4678 1972 318/340
1Q-72 w/o Electronic Ignition ............ 78.99
MD4679 1972 400/440
3Q-71 w/o Electronic Ignition ............ 78.99
MD4680 1972 400/440
1Q-72 w/o Electronic Ignition ............ 78.99
Plymouth Model-Specific Wires
1967-69 Valiant
MD4681 1967 383
3Q-66 .................................................. 78.99
MD4682 1967 383
1Q-67 .................................................. 78.99
MD4683 1968 383
3Q-67 .................................................. 78.99
MD4684 1968 383
1Q-68 .................................................. 78.99
MD4685 1969 383/440
3Q-68 .................................................. 78.99
MD4686 1969 383/440
1Q-69 .................................................. 78.99
1964-69 Barracuda
MD4687 1964 V8
3Q-63 all ............................................. 78.99
MD4688 1964 V8
1Q-64 all ............................................. 78.99
MD4690 1964 6 cyl
3Q-63 all ............................................. 61.99
MD4689 1964 6 cyl
1Q-64 all ............................................. 61.99
MD4691 1968 Hemi
9-67 race.............................................. 974.99
MD4692 1968 Hemi
12-67 race............................................ 974.99
MD4693 1968 Hemi
1-68 race.............................................. 974.99
MD4694 1968 Hemi
2-68 race.............................................. 974.99
MD4695 1969 Hemi
5-68 race.............................................. 974.99
1970 'Cuda
MD4696 1970 340
3Q-69 Six Pack ................................... 78.99
MD4697 1970 340
1Q-70 Six Pack ................................... 78.99
442
Date Coded Plug Wires
78.99
78.99
78.99
78.99
set
set
set
set
78.99
78.99
78.99
78.99
set
set
set
set
78.99
78.99
78.99
78.99
set
set
set
set
61.99
61.99
78.99
78.99
78.99
78.99
78.99
78.99
set
set
set
set
set
set
set
set
61.99
61.99
78.99
78.99
78.99
78.99
78.99
78.99
174.99
174.99
set
set
set
set
set
set
set
set
set
set
61.99
61.99
78.99
78.99
78.99
78.99
78.99
78.99
174.99
174.99
974.99
974.99
974.99
set
set
set
set
set
set
set
set
set
set
set
set
set
61.99
61.99
78.99
78.99
78.99
78.99
174.99
174.99
set
set
set
set
set
set
set
set
Note: These plug wires are not designed for use with aftermarket headers or aftermarket
manifolds. Wiring may be used with other manifolds or headers but are not guaranteed to fit.
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
set
Toll Free Order Line 800.854.1280
Spark Plug Wires
MN1124
Authentic Restoration Spark Plug Wire Sets
These restoration spark plug wire sets are as close to
original as possible. Each carbon suppression wire,
features correct color (orange with black boots),
lettering and correct spark plug boot. Proper length
and diameter for use with factory looms. Each set
contains 8 ignition secondary wires and one coil wire.
MN1124 1966-74 small block .............. 45.99 set
MN1125 1966-74 big block .................. 45.99 set
Hemi Spark Plug Tubes And Seals Set
426 Street Hemi Spark Plug Wires
Mopar Performance® spark plug wires for all 426 Street
Hemi applications. 7.5mm diameter high performance
wires, pre-cut and assembled. Features “Mopar” and
the cylinder number printed on each wire.
MN1123 1966-71 spark plug wires ..... 169.99 ea
Service replacement spark plug tube and seal set for
Mopar Hemi engines. Spark plug tubes are necessary
to create a seal to prevent oil from the valve cover area
of the cylinder head from escaping and to protect the
spark plugs and wires from oil as they go through
the valve cover and into the head. Each complete set
includes 8 tubes and seals.
MN1122 1966-71 tubes & seals .......... 119.99 set
QW627
426 Hemi Spark Plug Boot
Replacement of the original spark plug boot designed
for Hemi engines with power brakes. Measures
4-11/16" long with a 5/16" upper ID and a 5/8" lower
ID. Made in USA.
MD2083 1965-71 spark plug boot ........ 19.99 ea
Custom Spark Plug Wire Sets
Applications are available to fit most 1965-76
A-body, B-body and E-body vehicles. Not for Hemi
applications.
6 Cylinder
QW627 1973-76 all, elec. ignition ...... 24.99 set
8 Cylinder
QW611 1972
all ............................. 16.99 ea
QW625 1973-76 big block, elec. ign. . 31.99 ea
QW629 1965-73 all, std. ignition ........ 31.99 set
MN2220
Pre-Cut Ignition Wire Sets
Mopar Performance 8mm ignition wire sets with
factory attached cap and plug ends. Available with radio
suppression core for high performance street use or a
metallic core for racing applications. Wrapped in 8mm
heat resistant insulation to maintain maximum voltage.
Metallic Core
MN2220 big block ................................ 71.99 set
Hemi Spark Plug Insulator and Boot Set
MN1126
Stock Style Ignition Wire Sets
Need to get your Mopar running but don't need concours
perfect appearance? Then these spark plug wires are
just the thing for you. Designed to functionally replace
the original plug wires and install correctly, these plug
wire sets are ideal for daily-driven vehicles.
Small Block
MN1126 1965-73 standard ignition. ..... 27.99 set
MN1130 1972-74 electronic ignition.... 27.99 set
Big Block
MN1127 1966-68 all, exc. Hi-Po .......... 21.99 set
MN1128 1969
383 Dart ................... 30.99 set
MN1128 1969-71 all, Hi-Po ................. 30.99 set
MN1128 1972
all, std. ignition. ....... 30.99 set
MN1129 1972
all, elec. ignition. ..... 16.99 set
MN1131 1973-74 all ............................. 38.99 set
Universal Mopar Ignition Wire Set
This 8 mm ignition wire set is specifically made with
a suppression core for high performance applications.
Wires are blue with the Mopar name imprinted. For
small block, big block and Hemi. Hemi engines require
insulators and boots for each plug wire.
MN2216 cut to fit .................................... 79.99 set
Mopar Performance
Spark Plug Wire Removal Tool
This Mopar Performance tool allows easy removal of
spark plug wires without pulling the wire out of the
terminal end and boot. Made from steel with a rubber
coated handle.
MN2221 removal tool ............................. 25.99 ea
Spark Plug Wires
443
Engines & Components K
Mopar Performance Hemi spark plug insulator and
boot set needed to service one cylinder (eight required
per engine).
MN2217 insulator and boot set ............. 21.99 set
Spark Plug Wire Retainers
MD2402
MD2410
MA4701
MD2403
MD2411
1966-74 Spark Plug Wire Retainers
Replacement spark plug wire retainers for 1966-74 A-Body, B-Body and E-Body models equipped with small
block, big block or Hemi engines. A variety of applications are available individually or in kits.
Note: *Also fits 1970 Hemi Charger with round air cleaner.
MN2222
Small Block Engines
MD2401
1966-68
MD2409
1969-74
MD2412
1970-74
Big Block Engines
MD2400
1966-68
MD2404
1968-74
MD2579
1968-74
MD2410
1969-76
426 Hemi Engines
MD2402* 1966-70
MD2403* 1966-70
MD2411
1970-71
mounts to valve cover ..................................................................................... 3.99 ea
mounts to valve cover, retains 4 plug wires ................................................... 3.99 ea
mounts to valve cover, A/E-Body only, retains 2 wires ................................. 3.99 ea
mounts to exhaust manifold front corners ...................................................... 19.99 pr
mounts to LH exhaust manifold corner .......................................................... 3.99 ea
mounts to LH intake valley ............................................................................ 19.99 ea
mounts to thermostat housing bolt.................................................................. 10.99 ea
mounts to upper coil bracket .......................................................................... 12.99 ea
mounts to front throttle return spring bracket................................................. 12.99 ea
mounts to front throttle return spring bracket................................................. 12.99 ea
MD2406
MN1121
1966-67 A-Body Spark Plug Wire Retainer
Spark plug wire bracket for 1966-67 Mopar A-Body
models. This small bracket mounts on the left front
exhaust manifold stud with “L” bracket and holds plug
wires 1, 3 and 5. Manufactured in correct gauge steel
and thermoplastic coated as original. Made in USA.
MA4700 1966-67 plug wire bracket ..... 12.99 ea
K
Engines & Components
MD2407
1966-74 A, B & E-Body
Big Block Plug Wire Retainer Sets
These complete bracket sets include all plug wire
retainers needed for Mopar A & B-Body models
with big block engine. Manufactured from correct
gauge steel and thermoplastic coated as original.
Made in USA.
A-Body Sets
MA4701 1967
big block .................. 84.99 set
MA4702 1968
big block .................. 79.99 set
MA4703 1969
big block .................. 84.99 set
B-Body Sets
MN2222 1966-67 big block .................. 89.99 set
MN2223 1968
big block .................. 99.99 set
MD2406 1969
big block .................. 69.99 kit
MD2407 1970-71 big block .................. 62.99 kit
MN2224 1972-74 big block .................. 89.99 set
E-Body Sets
MD2407 1970-71 big block .................. 62.99 kit
444
MN1120
Big Block #6 & #8 Spark Plug Wire Shields
This shield bolts under the sixth and seventh head bolt to
protect #6 and #8 spark plug wire boot. Made in USA.
MN1121 1966-69 heat shield................ 11.99 ea
MN1120 1970-74 heat shield................ 11.99 ea
1968 A-Body 340 Spark Plug Wire Retainer
Spark plug wire bracket for 1968 Mopar A-Body
models equipped with a 340ci engine. This special
bracket mounts at the rear of the 340ci engine to
keep the plug wires away from the throttle cable and
automatic kickdown linkage. Manufactured using
correct gauge steel and then thermoplastic coated as
original. Made in USA.
MA4699 1968
plug wire bracket ..... 17.99 ea
Spark Plug Wire Retainers
Big Block #7 Spark Plug Wire Heat Shield
Spark plug wire shield for use with all Mopar Big Block
engines from 1960-76. This replacement spark plug
wire shield mounts to the fourth exhaust manifold stud
from the front of the engine to protect the #7 Spark
Plug Wire boot. Made in USA.
MN1119 1960-76 heat shield................ 11.99 ea
Toll Free Order Line 800.854.1280
Resistors & Regulators
1962-74 A, B & E-Body
Factory Spark Plug Wire Retainer
Keep your plug wires neat by replacing this often
missing black plastic, free hanging spark plug wire
retainer. Fits all 1962-74 A, B and E-Body models.
MN1734 1962-74 all ............................. 4.99 ea
VR733
MN1132
1962-76 Ballast Resistor
Replacement ballast resistor for 1962-76 Mopar
models. This resistor is designed to look, install and
function exactly as original. The ballast resistor works
in conjunction with the ignition coil. During low speed
operation, the ballast resistor heats up. The increase
in temperature causes an increase in resistance in the
ignition system and ultimate failure in the ballast
resistor. Keep a spare in your glove box!
MN1132 1962-72 std. ign., OEM ......... 34.99 ea
MN1133 1962-72 std. ign., aftermarket . 4.99 ea
MN1134 1972-76 electronic ign. .......... 5.99 ea
VR1115
1972-76 Ballast Resistor
Wiring Connector
Spark Plug Wire Separator Set
This set of spark plug wire separators is made from
high grade plastic which helps insulate the plug wires
and reduce shorts and crosstalk. Includes two (4) wire
separators, two (3) wire separators, and two (2) wire
separators.
MN2417 V8 .......................................... 2.49 set
Replacement ballast resistor
wiring prong /connector
for Mopar vehicles with
Electronic Ignition or large
4-prong ballast resistors.
MD4500 1972-76 electronic
i iignition
iti ....
MD2439
77.99
99 ea
1960-76 Replacement Voltage Regulators
1962-72 Ballast Resistor Bracket
Ballast resistor bracket for all 1962-72 Mopar models
with points ignition. The ballast resistor mounts to
this bracket.
MN1136 1962-72 standard ignition. ..... 15.99 ea
Spark Plug Wire Support and Separator Set
MN2180
1970-71 Date Coded Voltage Regulators
Universal Fit Spark Plug Wire Loom Set
Universal spark plug wire loom set for 7 mm and 8
mm wire. Includes four steel 1/4" mounting studs.
Note: Not for use with cast aluminum valve covers.
MN2215
............................................... 25.99 set
Mopar performance date coded voltage regulators a
must for a correct restoration. For use with external
regulator models. A voltage regulator is an electrical
device needed to control the output of a generator
or alternator.
MN2180 1970
#419, 41st week of 1969 29.99 ea
MN1140 1970-71 #271, 27th week of 1971 36.99 ea
MN2181 1970-71 #321, 32nd week of 1971 29.99 ea
1964-69 Voltage Regulator Pigtails
Replacement voltage regulator pigtails for all 1964-69
Mopar models. These harnesses connect the voltage
regulator to the rest of the engine bay wiring harness.
MN2192 1964-69 all ............................. 6.99 ea
Ballast Resistors . Voltage Regulators
445
Engines & Components K
These high grade chrome plated plastic support brackets
attach to the valve cover bolts or studs to route the
plug wires neatly from the distributor, over the valve
covers, and to the plugs. Keeps wires away from hot
underhood parts, insulates the plug wires, and reduces
shorts and crosstalk. Includes four support brackets,
two (3) wire separators, and four (2) wire separators,
as shown above.
MN2418 V8 .......................................... 4.99 set
A voltage regulator is used to control the output of an
alternator or generator. Regulators are either internal
or external. Internal regulators are mounted in the
alternator housing, external regulators are typically
located on the fenderwell in the engine compartment.
Applications are available to fit all models with all
engines for the year ranges specified.
1960-76 Voltage Regulators
VR1115 1960
all ............................. 57.99 ea
VR706 1961-69 all ............................. 12.99 ea
VR733 1970-76 all ............................. 10.99 ea
1961-69 OE Appearance Voltage Regulator
MD2439 1961-69 all ............................. 21.99 ea
1962-73 Mopar Performance Voltage Regulator
MN1140 1970-73 all ............................. 36.99 ea
Replacement Alternators
7521
MN2156
1961-76 Replacement Chrome 75-Amp Alternators
7509
K
Engines & Components
Generators and Alternators
Direct replacement for a worn-out or non-functional original alternator. These quality
remanufactured alternators will install and function as original. Applications are
available for most 1960-76 A-body, B-body and E-body vehicles.
6 Cylinder
9112
1960-61
30A
170
generator ................................. 135.99 ea
7007
1961-69
60A
170
1-groove pulley ........................ 47.99 ea
7006
1961-69
60A
170
2-groove pulley ........................ 54.99 ea
7024
1970-74
60A
198
1-groove pulley ........................ 67.99 ea
7509
1970-74
78A
198
2-groove pulley ........................ 58.99 ea
7521
1970-74
100A 198
2-groove pulley ........................ 114.99 ea
7007
1961-69
60A
225
1-groove pulley ........................ 47.99 ea
7006
1961-69
60A
225
2-groove pulley ........................ 54.99 ea
7024
1970-76
60A
225
1-groove pulley ........................ 67.99 ea
7509
1970-76
78A
225
2-groove pulley ........................ 58.99 ea
7521
1970-76
100A 225
2-groove pulley ........................ 114.99 ea
8 Cylinder
Small Block V8
7007
1964-69
60A
273
1-groove pulley ....................... 47.99 ea
7006
1964-69
60A
273
2-groove pulley ....................... 54.99 ea
7007
1961-69
60A
318
1-groove pulley ....................... 47.99 ea
7006
1961-69
60A
318
2-groove pulley ....................... 54.99 ea
7024
1970-76
60A
318
1-groove pulley ....................... 67.99 ea
7509
1970-76
78A
318
2-groove pulley ....................... 58.99 ea
7521
1970-76
100A 318
2-groove pulley ....................... 114.99 ea
7007
1968-69
60A
340
1-groove pulley ....................... 47.99 ea
7006
1968-69
60A
340
2-groove pulley ....................... 54.99 ea
7024
1970-73
60A
340
1-groove pulley ....................... 67.99 ea
7509
1970-73
78A
340
2-groove pulley ....................... 58.99 ea
7521
1970-73
100A 340
2-groove pulley ....................... 114.99 ea
7024
1974-76
60A
360
1-groove pulley ....................... 67.99 ea
7509
1974-76
78A
360
2-groove pulley ....................... 58.99 ea
7521
1974-76
100A 360
2-groove pulley ....................... 114.99 ea
Big Block V8
7007
1961-65
60A
361
1-groove pulley ....................... 47.99 ea
7006
1961-65
60A
361
2-groove pulley ....................... 54.99 ea
7007
1962-69
60A
383
1-groove pulley ....................... 47.99 ea
7006
1962-69
60A
383
2-groove pulley ....................... 54.99 ea
7024
1970-71
60A
383
1-groove pulley ....................... 67.99 ea
7509
1970-71
78A
383
2-groove pulley ....................... 58.99 ea
7521
1970-71
100A 383
2-groove pulley ....................... 114.99 ea
7024
1972-74
60A
400
1-groove pulley ....................... 67.99 ea
7509
1972-74
78A
400
2-groove pullet ........................ 58.99 ea
7521
1972-74
100A 400
2-groove pulley ....................... 114.99 ea
7007
1961-62
60A
413
1-groove pulley ....................... 47.99 ea
7006
1961-62
60A
413
2-groove pulley ....................... 54.99 ea
7007
1963-69
60A
426
1-groove pulley ....................... 47.99 ea
7006
1963-69
60A
426
2-groove pulley ....................... 54.99 ea
7024
1970-71
60A
426
1-groove pulley ....................... 67.99 ea
7509
1970-71
78A
426
2-groove pulley ....................... 58.99 ea
7521
1970-71
100A 426
2-groove pulley ....................... 114.99 ea
7007
1966-69
60A
440
1-groove pulley ....................... 47.99 ea
7006
1966-69
60A
440
2-groove pulley ....................... 54.99 ea
7024
1970-74
60A
440
1-groove pulley ....................... 67.99 ea
7509
1970-74
78A
440
2-groove pulley ....................... 58.99 ea
7521
1970-74
100A 440
2-groove pulley ....................... 114.99 ea
446
Alternators
Chrome 75-amp Alternators. Classic offers higher amperage than stock replacement
alternators for 1961-76 A-body, B-body and E-body vehicles. Available in single
or 2-wire connections and with single or double pulleys.
Single Wire Connection Alternators
MN2156
1961-76 1-groove pulley ............................................... 199.99 ea
MN2158
1961-76 2-groove pulley ............................................... 199.99 ea
2-Wire Connection Alternators
MN2157
1961-76 1-groove pulley ............................................... 169.99 ea
MN2159
1961-76 2-groove pulley ............................................... 169.99 ea
MN2160
1961-76 Replacement Upgrade 140-Amp Alternators
Chrysler Upgrade 140-amp Alternators for small block Chrysler models. Classic
offers higher amperage than stock replacement alternators for 1961-76 A-body,
B-body and E-body vehicles. Single wire connection with a double pulley and
internal regulator. These alternators feature excellent idle output, heavy duty rectifier
and gold battery post.
Note: Some modifications to the mounting bracket will be necessary.
Chrome finish
MN2160
1961-76
Natural finish
MN2161
1961-76
Black finish
MN2162
1961-76
2-groove pulley ............................................... 249.99 ea
2-groove pulley ............................................... 199.99 ea
2-groove pulley ............................................... 219.99 ea
1961-76 Replacement Upgrade 200-Amp Alternators
Chrysler Upgrade 200-amp Alternators for small block Chrysler engines. Classic
Industries® offers higher amperage than stock replacement alternators for 1961-76
A-body, B-body and E-body vehicles. Single wire connection with a double pulley
and internal regulator. These alternators feature excellent idle output, heavy duty
rectifier and gold battery post.
Note: Some modifications to the mounting bracket will be necessary.
Natural finish
MN2163
1961-76
2-groove pulley ............................................... 389.99 ea
Toll Free Order Line 800.854.1280
Alternator Components
MD2421
1966-74 Big Block Alternator Brackets
MD2426
1966-74 Small Block Alternator Bracket Sets
Replacement bracket kits feature correct length
bolts, thick flat washer and 3 spacers. Triangle and
adjusting bracket black-dipped as original. 7-piece
set. Made in USA.
With Water Pump Casting #2402794 or 2863067
MD2426 1966-69 bracket set................ 36.99 set
With Aluminum Water Pump Casting # 3420037
MD2428 1970-74 bracket set................ 36.99 set
MD2421 1966-74 triangle bracket ....... . 21.99 ea
MD2422 1966-74 main bracket ............ 31.99 ea
MD2423 1966-74 swing arm bracket ... 75.99 ea
MD2437
Alternator Bolt & Spacer Kits
Each kit includes bolts, washers and spacers needed
to mount the alternator and brackets.
1966-74 Alternator Slider Bracket
Reproduction alternator slider bracket. Will fit and
install on all 1966-74 Mopar V8 engines except Hemi.
Made in USA.
MD4067 1966-74 except Hemi ............ 12.99 ea
Note: *With 3-hole alternator bracket. Must use #MD2424
with this kit.
1970-74 Small Block Engines
Without AC
MD2435 w/alum. water pump............... 16.99
1966-76 Big Block Engines
Without AC
MD2580 w/iron water pump ................. 14.99
MD2438* B-series ................................. 14.99
MD2580 4-hole alt bracket.................... 14.99
With AC
MD2437 w/iron water pump ................. 14.99
MD2436* B, w/iron water pump ............ 10.99
kit
kit
kit
kit
kit
kit
MD2425
1965-74 Big Block Alternator Bracket Sets
Replacement bracket kits feature correct length
bolts, thick flat washer and 3 spacers. Triangle and
adjusting bracket black-dipped as original. 7-piece
set. Made in USA.
MD2425 1965-67 without AC .............. 41.99 set
MD2427 1967-74 without AC .............. 41.99 set
MD2434
1962-74 Big Block & Hemi
Alternator Mounting Triangle Bracket
Replacement alternator mounting triangle bracket for
1962-66 Mopar models equipped with a big block or
Hemi but not equipped with AC. Each will replace
the original exactly for a like factory appearance.
Made in USA.
MD2434 1962-66 w/o AC .................... 24.99 ea
MD2433 1967-74 w/o AC .................... 24.99 ea
1964-76 B Engine Head Spacer Bolts
Engine to head spacer bolt set for all 1964-76 B-series
big block engines with or without AC. Includes 7 bolts.
MD2424
1964-76 ................................ 18.99 set
T9456
Chrome Alternator Bracket Sets
Replacement triangle bracket and slider bracket. Triple
chrome plated steel construction as original. Features
a 1 year manufacturer’s warranty.
T9456
small block bracket set .......... 19.99 set
T9457S big block
bracket set .......... 19.99 set
1966-71 Hemi Alternator Spacer Kit
Positive Wire Insulator
Plastic collar insulates the positive wire at the rear
of the alternator.
MN1138
all alternators ...................... . 6.99 ea
MD2429
1964-71 Hemi Alternator Bracket Sets
Each set is complete and includes bracket, spacers and
bolts. Fits 1964-71 Hemi engines.
With Water Pump #2205862, 2468007 or 25366767
MD2429 1964-66 painted finish ........... 34.99 set
MD2430 1964-66 unpainted finish ....... 31.99 set
With Water Pump #2780987 or 3698468
MD2431 1964-66 unpainted finish ....... 31.99 set
MD2432 1967-71 painted finish ........... 34.99 set
Stainless Steel Alternator Spacers
1966-74 Alternator Wiring Clip
This 304 stainless Mopar alternator spacer set fits
between the alternator bracket and the block. Fits big
block or small block. Made in USA.
MF1746 .................................................. 18.99 set
Mounts to back of alternator to prevent smaller wires
from coming in contact with moving parts. Includes
mounting screw. Made in USA.
MN1137 1966-74 3 finger clip .......... 5.99 ea
Alternator Brackets . Spacers
447
Engines & Components K
Hemi alternator spacer kit which includes 3 spacers
for correct alignment.
MD4068 1966
Hemi ........................ 14.99 kit
MD4068 1967-71 Hemi ........................ 14.99 kit
Starters
MN9904
1962-76 Brand New Replacement Starters
This direct replacement starter is new and priced competitively against remanufactured
starters. Designed to replace a worn out or inoperative original starter, these will
install and function exactly as original. Available for 1962-76 A-body, B-body and
E-body vehicles.
6 Cylinder
N17466
1964-69 170 .................................................................. 114.99 ea
N17466
1970-74 198 .................................................................. 114.99 ea
N17466
1962-76 225 .................................................................. 114.99 ea
8 Cylinder
Small Block V8
N17466
1964-69 273 .................................................................. 114.99 ea
N17466
1962-76 318 .................................................................. 114.99 ea
N17466
1968-73 340 .................................................................. 114.99 ea
N17466
1971-76 360 .................................................................. 114.99 ea
Big Block V8
N17466
1962-65 361 .................................................................. 114.99 ea
N17466
1964-71 383 .................................................................. 114.99 ea
N17466
1972-76 400 .................................................................. 114.99 ea
N17466
1965
413 .................................................................. 114.99 ea
N17466
1964-71 426 .................................................................. 114.99 ea
N17466
1966-76 440 .................................................................. 114.99 ea
1962-76 Mopar Performance Lightweight Starters
These specially-designed starter motors with heavy-duty features for V8 applications
need no adapters. Weighing approximately 7 lbs. complete, these units are lighter
than the previous Mopar Performance lightweight starter and half the weight of the
original 1960s-70s vintage production starter and one inch shorter.
Note: May require header/exhaust/block modifications for some applications.
MN9903
MN9904
1967-76
1962-74
small block...................................................... 199.99 ea
426 Hemi/big block ........................................ 304.99 ea
3472
3248
1960-76 Remanufactured Starters
MN2164
K
Engines & Components
1965-76 Powermaster Mopar Replacement Starters
Powermaster replacement starters for 1965-76 Mopar models. Each starter includes
a dyno sheet to show how well the starter you just bought performs. Choose between
stock OEM or up to Ultra Torque rated for 250+ ft. lbs. of torque. The torque output
of a starter is the most important consideration. The starter must be able to spin
the engine, and do it without overheating internally. Since there is no such thing
as having too much torque (even on a street vehicle) a 200 ft. lb. starter will work
for everyone. Speaking in general terms, a over 12:1 compression or higher engine
should use a 200 ft. lb. starter. Engines up to 12:1 should use at least a 180 ft. lb.
starter. 160 ft. lb. starters are good for engines up to 10.5:1.
OEM Style
MN2164
1965-76 ..................................................................... 149.99 ea
PowerMax
MN2165
1965-76 160 ft. lb. mini-starter, natural finish ........... 179.99 ea
Mastertorque
MN2166
1965-76 180 ft. lb. natural finish................................ 179.99 ea
XS Torque
MN2167
1965-76 200 ft. lb. natural finish................................ 229.99 ea
MN2168
1965-76 200 ft. lb. chrome finish ............................... 349.99 ea
Ultra Torque
MN2169
1965-76 200 ft. lb. high speed, natural finish ............ 329.99 ea
MN2179
1965-76 250 ft. lb. natural finish................................ 269.99 ea
448
Starters
Quality remanufactured starter motors. Tested to meet or exceed factory specifications,
each starter will install and function exactly as original. Applications are available
for 1960-76 A-body, B-body and E-body vehicles.
6 Cylinder
3472
1961-64
170 2 bolt ......................................................... 169.99 ea
3250
1964-69
170
.................................................................. 60.99 ea
3250
1970-72
198 except 3-speed........................................... 60.99 ea
3248
1970-72
198 3-speed MT ............................................... 79.99 ea
3250
1973-74
198
.................................................................. 60.99 ea
3472
1960-61
225
.................................................................. 169.99 ea
3250
1962-76
225
.................................................................. 60.99 ea
8 Cylinder
Small Block V8
3250
1964-69
273
.................................................................. 60.99 ea
3248
1966-67
273 3 bolt ......................................................... 79.99 ea
3250
1962-76
318
.................................................................. 60.99 ea
3250
1968-73
340
.................................................................. 60.99 ea
3258
1974-76
360 high torque ................................................ 69.99 ea
3250
1974-76
360
.................................................................. 60.99 ea
Big Block V8
3250
1962-65
361
.................................................................. 60.99 ea
3258
1964-75
383 high torque ................................................ 69.99 ea
3250
1966-71
383
.................................................................. 60.99 ea
3258
1972-76
400
.................................................................. 69.99 ea
3258
1964-71
426 high torque ................................................ 69.99 ea
3250
1965-67
426
.................................................................. 60.99 ea
3258
1966-76
440
.................................................................. 69.99 ea
Toll Free Order Line 800.854.1280
Starter Components
Tools
Spark Plug Hole Thread Chaser
Cleans and threads directly in the spark plug hole!
Double ended for both 14mm and 18mm threads. Use
with 13/16" spark plug socket.
Y20200 .................................................. 7.99 ea
1970-74 E-Body Starter Heat Shield
Plastic starter shield which mounts to the frame
and guards the starter on models equipped with AT.
Commonly broken or missing.
ME1664 1970-74 starter heat shield.... 124.99 ea
MD2364
Spark Plug Gappers
Gauges and gaps all types of spark plugs from 0.20"
to .100" (.50mm to 2.53mm) Includes tapered edge
for gauging spark plugs. Specially designed hole with
flange adjusts side wire of plug without pressuring
center electrode.
Y67870
............................................... 4.99 ea
1968-74 Starter Dust Shield
Replacement dust shield which mounts between the
starter and bellhousing.
MD2366 1968-74 starter dust shield .. . 9.99 ea
MD2361
1962-74 Starter Relays
Replacement starter relays for all 1962-74 models.
These relays mount on the inner fender near the battery.
2095608 1962-65 models with MT ...... 9.99 ea
2095609 1962-65 starter relay ............. . 8.99 ea
2444442 1966-74 exc. 1964-69 w/MT . 9.99 ea
2444453 1966-69 models with MT ...... 8.99 ea
Spark Plug Terminal Pliers
Safely removes spark plug cables. Prevents damage
to cables when replacing. The handles and jaws are
coated with heavy plastic for a sure grip.
X135
.................................................. 9.99 ea
1962-65 Starter Splash Shield
Starter splash shields for 1962-65 B-Body models.
Protects the starter from dust, water and other elements.
Made in USA.
MB2216 1962-65 starter splash shield . 13.99 pr
1966-74 Starter Relay Shield
Each set includes studs, washers and starter mounting
hardware for all V8s and 1966-69 Hemi with automatic
transmission. Not for direct drive starter. Made in USA.
MD2368
1964-74 ................................. 8.99 set
Spark Plug Gapper & Feeler Gauge Set
All-in-one tool comes with 6 spark plug gap wires, an
electrode bending tool, and 12 steel blades. Precision
wires and blades can measure both spark plug and
ignition system settings. Blades are approximately
1/2" wide by 3 1/2" long. Includes .025", .030", 034",
035", 040" and .045" gap wires, and 010", .012",
.015", .016", .017", .018", .019", .020", 022", 024",
025" and .026" blades.
Y67850 ................................................... 8.99 set
Remote Control Starter Switch
1966-69 Hemi Direct Drive
Starter Mounting Hardware
Hardware to mount direct drive starter on 426 Hemi
with manual transmission. Made in USA.
MD2367 1966-69 direct drive ............. 6.99 set
Use to bypass the ignition switch on any engine with
solenoid starter switch. Lets you crank the engine
while working in the engine compartment. Includes
44" long leads. Connect from the positive terminal
of the battery to the energizing terminal of solenoid.
Use for generator, starter, electrical tests, setting
ignition points, fuel pump tests, adjusting tappets and
compression tests
Y20750 .................................................. 19.99 ea
Wire Tester Spark Plug Wire Tester
When you want to quickly locate faulty plug wires,
you need this tester. Now you can check spark plug
wires without piercing or ruining the wires. If the
light flashes, you have a sound and intact wire. If not
it’s time to replace.
Y26900 ................................................... 11.99 ea
Starter Parts . Electrical Tools
449
Engines & Components K
1964-74 Starter Mounting Hardware
Black plastic shield which attaches to the starter relay
to prevent accidental grounding of positive terminal.
For 1970-74 E-body, 1966-74 B-body and select
1966-74 A-body models.
MD2365 1966-74 starter relay shield ... 7.99 ea
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising