JA-80W-wireless PIR:MW-motion

JA-80W-wireless PIR:MW-motion
JA-80W wireless PIR / MW motion detector
The detector is used for human motion detection in the interior of a building. Thanks to the combination
of motion and microwave detection, the detector is highly resistant to false alarms.
The detector guards the same way as a classic PIR motion detector.
When motion is sensed in the guarded area, the MW detector is activated to confirm the triggering of
the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm
report to the control panel.
Specifications
Power supply
Lithium battery type LS(T)14500 (3.6V/2 Ah AA), power supply type C
Typical battery lifetime
Approx. 2 years (PIR sensor sleep time 5min.)
Communication band
868 MHz, Oasis protocol
Communication range
Approx. 300m (open area)
Recommended installation height
2.5 m above floor level
PIR sensor detection angle/detection range
120° / 12 m (with basic lens)
MW detection range/ MW frequency
0.5 to 20m / 9.35 GHz
Operational environment according to EN 50131-1
II. indoor area
Operational temperature range
-10 to +40 °C
Dimensions
110 x 60 x 55 mm
EN 50131-1, EN 50131-2-4, EN 50131-6 EN 50131-5-3
classification
Grade 2
Complies with
ETSI EN 300220, ETSI EN 300 440-1, EN 50130-4, EN 55022, EN
60950-1
Can be operated according to
ERC REC 70-03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising