HS-620 Compact and Portable Meter

HS-620 Compact and Portable Meter
HS-620 Compact and Portable Meter
Vibration output
Key Features
• Velocity & bearing condition
• Used to monitor vibrations
without installing equipment
• Rechargeable battery used
with mains or in-car charger
• Sensor/cable fault indicator
• Display hold function
• Choice of metric or
imperial measurement
Product Description
The HS-620 portable Vibration Meter Kit has been designed for use as both an entry level and also
a comprehensive vibration monitoring instrument for maintenance engineers across all types of
industry.
The kit consists of the compact vibration meter, a hand held probe, a magnetic mount for more
permanent installations, a protective carrying case, an instruction manual and battery chargers for
both mains and in-car use.
The meter is microprocessor based and by selection of the controls can be easily set up to monitor
acceleration (g) levels, velocity (in/sec), displacement (µm) and bearing condition (BG or BV). A
display hold function is also included.
The unit, which conforms to ISO 2954 and ISO 10816-3 also has an automatic alarm check for
bearing condition.
Operating from an internal re-chargeable Lithium battery, the meter offers 48 hours continuous
operation. From flat, the unit can be recharged in 3 hours using either the mains or in-car charger
supplied with the kit.
Because of its compact size, ease of use and battery operation, the HS-620 allows engineers to
monitor vibration levels on important machinery anywhere around the factory.
www.hansfordsensors.com
sales@hansfordsensors.com
We reserve the right to alter the specification of this product without prior notice
TS089U.3
HS-620 Compact and Portable Meter
Vibration output
Technical Performance
Input
Accelerometer
Vibration
100 mV/g constant current accelerometer other inputs on request
Hand held, supplied with 0.8 M cable
Acceleration ... 0-50 g Peak
Velocity ... 0-13.5 in/s RMS
Displacement ... 0-4000 µm pk-pk
Bearing Condition (BG) ... 0-18 g RMS
Bearing Condition (BV) ... 0-1 in/s RMS
± 5%
Acceleration ... 10 Hz to 12 kHz
Velocity ... 10 Hz to 1 kHz
Displacement ... 10 Hz to 1 kHz
Bearing Condition (BG & V) ... 1 kHz to 12 kHz
Automatic Alarm Check for Bearing Condition
LCD
Displays alarm status against ISO 2954 & ISO 10816-3
Accuracy
Bearing
Display
Hold Mode
Environmental
Temperature Range (meter)
Operating ... 14 to 122°F
Storage ... -4 to 140°F
-4 to 194°F
IP64 Dust tight and splash resistant
EN61326-1:2013
Temperature Range (accel)
Sealing
EMC
Electrical
Power
Lithium rechargeable battery
3.6 Volts, 1700 mA hours
48 hours continuous operation
Auto switch-off after 3 minutes
3 hrs from flat, supplied with meter,
charger & car charger
Battery Charge
Mechanical
Case Material
Dimensions
Weight
Plastic
4.5 x 2.8 x 1 in
Meter - 5.6 oz.
Accelerometer (incl cable) - 8in
26.5 lbs pull strength
2.8in
Magnetic Base
Spike
How To Order
Product Prefix
HS - Hansford Sensors
H
S
6
Product Series
620 - Portable Vibration Meter
2
0
X
Accessories
Hand-Held Probe
(HS-6201005501)
Magnetic Mount
(¼-28” UNF Male)
Stainless Steel Vibration Spike 3 in.
(HS-AS054-075)
2.6 ft. Cable with BNC & TNC Connectors
(AC-095)
In-Car Battery Charger
(HS-AA032)
Mains Battery Charger
(HS-AA033)
Carry Case
(HS-AA034)
Replacement Battery
(HS-AA035)
Mains Charger
A - United Kingdom
B - Europe
C - Australia
D - USA
E - Asia
www.hansfordsensors.com
sales@hansfordsensors.com
We reserve the right to alter the specification of this product without prior notice
TS089U.3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising