VUE Audiotechnik H-8
h-8 System
VUE
audiotechnik
h-Class 8 Inch High Definition Full Range Systems
Preliminary Specification Sheet
h-8 Features
• Wide 100º x 40º coverage
• Neodymium HF compression driver with Truextent® beryllium
diaphragm for exceptional high frequency clarity and output
• Dual channel, high efficiency amplifiers deliver ample power for
both transducers while eliminating the need for noisy cooling
fans
• Integrated DSP with SystemVUE network control and monitoring
• Pole mount, integrated hanging points and optional rigging
hardware for deployment as a main system, within multi-cabinet
arrays, or in a variety of support configurations.
h-8 Applications
• Theatrical sound reinforcement
• Portable and installed audio-visual systems
• Front fill or under-balcony systems
• Themed entertainment venues
• Houses of worship
• Conference centers and corporate AV
The two-way h-8 brings the pristine sound quality and versatility
of the larger h-12 and h-15 systems to a compact package ideal for
applications where space is at a premium and exceptional output-tosize ratio is critical.
Sophisticated onboard DSP and
networking capabilities come
courtesy of the same 64-bit
digital processor found inside
the h-12 and h-15 systems. This
powerful processor handles all
EQ, time alignment, crossover
management, and speaker
protection, as well as SystemVUE
network control and monitoring
functions.
460mm (18.11 in)
303mm (11.93 in)
ry
ina
m a
eli at
Pr D
Even the h-Class cabinets are
intended to a raise the standard
for quality and attention to detail. Like it’s larger siblings, the h-8
grill and handle bezels are coated with a two part finish that lays a
Surprisingly compact and lightweight, the h-8 combines an 8-inch
transparent candy-apple red coating over a base coat of black. The
LF transducer with a 1-inch exit compression driver that features a
durable finish has a deep red hue that’s uniquely attractive while
Truextent® beryllium diaphragm at its core. Beryllium technology
remaining entirely unobtrusive. The heavy aluminum rear panel is
allows the compression driver to deliver dramatic improvements in HF
both functional and visually impactful, with the “VUE” logo machined
extension and response linearity that simply cannot be matched by
directly into the heat-sink fins.
traditional aluminum or titanium designs. The beryllium compression
driver is mounted to a precision horn with 100 degree (H) by 50
All h-Class enclosures are manufactured to the strictest ISO standards,
degree (V) coverage.
using multi-ply, cross-grain laminated birch with extensive interior
bracing for resonant-free output. The h-8 features a pole mount,
The h-8 is fitted with a 2-channel, high efficiency power amplifier
integrated hanging points, and optional rigging hardware for easy
modules that provide ample power for both transducers while
deployment as a main system, within multi-cabinet arrays, or in a
eliminating the need for noisy cooling fans. A lightweight, fully
variety of support configurations. A rugged, polyurethane finish
protected switch mode power supply with auto voltage detection
ensures years of on-the-road service.
provides hassle-free worldwide operation with universal mains
operation for 120V and 230V.
286 mm (11.26 in)
Copyright © 2014 VUE Audiotechnik, LLC. All rights reserved.
www.vueaudio.com
VUE
audiotechnik
h-8 System
h-Class 8 Inch High Definition Full Range Systems
Preliminary Specification Sheet
h-8
Model
Single 8-in Wide Coverage
Description
Acoustic Data
75 Hz to 21 kHz
Frequency Range (-10 dB)
50 Hz - 26 kHz
ry
ina
m a
eli at
Pr D
Frequency Response (+-2.5 dB)
Sensitivity (1W/1m)
94 dB SPL
Max Peak SPL
(band limited pink noise 6 dB crest factor)
122 dB SPL
Max SPL Long Term
(AVG SPL @1M before protection band limited pink
noise)
116 dB SPL
Coverage Horizontal
100 degrees - 6 dB
Coverage Vertical
40 degrees - 6 dB
Amplifier Power
(Long Term Sine Wave before protection)
LF: 275 watts rms
HF: 40 watts rms
Amplifier Power
( AVG Burst@ 1% THD)
LF: 600 watts rms
HF: 300 watts rms
Amplifier Data
Amplifier Protection
Input limiter, short circuit protection, DC protection of output, under & over voltage
protection, intelligent mains fuse protection, power stage overload protection,
temperature protection of transformers and heat-sinks
Operational Voltage
Universal Mains, 85-268V (dual voltage auto selection). UREC™ power supply integrated
amplifier modules provides universal mains operation for 120 V and 230 V, eliminating the need
for market specific self-powered loudspeakers and related reliability issues.
THD+N (typical)
DSP
Network
< 0,05 % (20 Hz - 20 kHz, 3 dB below rated power)
96k Hz sample rate, mixed-mode 64-bit digital processing, 120 dB dynamic range, less than 600 microseconds
latency
Ethernet / IP DHCP (or fixed IP) for remote monitoring and control
Transducer Data
LF Driver Description
8-inch driver 3-in voice coil
HF Driver Description
1-inch exit 34 mm voice coil, Pure Truextent® beryllium diaphragm
Physical Data
Inputs:
Female XLR input with male XLR loop output for both Analogue input and AES EBU digital input (default digital
AES channel 1, channel 2 selectable remotely via software). If clock is present system uses AES digital input.
System will fall back on analog input clock is not present.
Cabinet Material
Multi-ply birch hardwood
Cabinet Surface
12 Step Dura-Coat LX
Handles
Side Recessed
Dimensions (H x W x D)
18.11 x 11.26 x 11.93 in (460 x 286 x 303 mm)
Weight
40 lbs (18.14 kg)
Copyright © 2013 VUE Audiotechnik, LLC. All rights reserved.
All mentioned specifications, features and designs are subject to change without prior notice.
DS|h-8.05|January 2014
VUE Audiotechnik
640 Alpine Way, Escondido CA 9209
Phone +1-760-520-1069
info@vueaudio.com • www.vueaudio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising