Thermco R90 User Guide.cdr

Thermco R90 User Guide.cdr
HIR90TTW Quick User Guide
DISPLAY MODES
CH1
CH1
CH1
CH2
CH2
CH2
MEM
LOG
USB Cable
Included Accessories
CD Software/Manuals
USB Pwr Adapter
MAX
Current Readings
Records Recorded
MEM
LOG
MAX Readings
Record Capacity
MIN
MEM
LOG
MIN Readings
Record to Upload
PLEASE NOTE: This software should be installed on
a dedicated PC running 24/7 , not a office work station.
Download Software from Thermcoproducts.com
Support \ Downloads \ [ZIP] TronFlux
GETTING STARTED
Prerequisite Check Sheet
1. Complete the included form in this PDF to simplify setup.
Mounting Hardware
R90 Layout
1
9
6
CH1
CH3
2
CH2
CH4
3
MAX
MIN
7
MEM
LOG
8
4
10
R90
5
Intelligent Data Logger
6
Vent
LCD Area
3
Alarm Indicator
4
Buttons (Left/Right)
5
Model Number
6
Antenna Connector
7
SIM Card Slot (for GSM GPRS)
8
USB port (5V 1A micro 5pin)
9
Wall-Mounting Slot
10
Flip Out Desk Stand
11
External Probe Connectors
11
CH-1
Button Function
1
2
CH-2
R90 Unit
1. Attach antenna.
2. Connect probes (power off unit prior to connecting or disconnecting the probes).
3. Connect R90 to computer via USB cable.
4. Note: Fully charge battery prior to logging.
R90 Software Install
1. Unzip TronFlux.zip to C:\
2. Install USB/Com Driver.
Go to C:\TronFlux\Driver folder and run... SETUP.exe
3. Install System Server Software.
Go to C:\TronFlux\Setup.exe
Refer to “TronFlux User Guide.pdf” for detailed instructions.
Configure R90
1. Go to C:\TronFlux\LogLive folder and run... LogLive.exe
a) Set wifi (ssid, password).
b) Set IP of PC running software.
c) Assign a logger name.
d) Set Alarm/Alert Min-Max values.
Refer to “LogLive User Guide.pdf” for detailed instructions.
Start Logging Service
1. Note: This must be running 24/7 for realtime data collection.
2. Set up Email for Alerts... Click Smtp Server.
a)
Server = your email providers “outgoing smtp address”.
b)
Port = your email providers “port value” check SSL if using.
c) Account = your email address.
d) Password = your password.
Left Button
1. Press the left button to check the current readings and historical data
press again to check MAX readings and the capacity.
press once again to check MIN readings and data waiting to upload.
2. Press and hold left button for 3 seconds will turn on/off the LOG function while in unlock mode.
Start Management Console
1. Open a Web Browser
2. Enter “localhost” or the PC’s “IP” (that’s running the server) in the address bar.
Refer to “TronFlux User Guide.pdf” for detailed instructions.
Right Button
1. Press and hold right button for 3 seconds will turn on R90 from off sate.
Press and hold right button for 3 seconds will turn off R90 while in unlock mode.
2. Press right button to turn on/off back light function (optional function for device)
Specifications
Left & Right Buttons
1. Press left and right buttons together will Lock/Unlock the device.
2. Press and hold left and right buttons for 3 seconds while in unlock mode will delete all data in R90.
C A T A LO G N o .
D ESC R IPT IO N
HIR 9 0 T T W
2 C hannel W ireless T emp erat ure D at a Lo g g er
SPEC IF IC A T IO N S
LCD Layout
T emp erat ure R ang e:
8
9
10
11
12
13
14
15
1
2
3
CH1
CH3
4
CH2
CH4
5
6
MAX
MIN
Date and Time
12
SMS Indication (gsm/gprs)
Buttons LOCK lndication
13
Wireless Connection
3
Alarm lndication-CH1
14
Temperature Value
4
Alarm lndication-CH2
15
Temperature Unit
5
Maximum Value
16
Humidity Value
±0 .5
R eso lut io n:
±0 .1
Pro b es:
6 5,0 0 0
1s~2 4 h
U SB D river, Lo g Live, T ro nF lux W in X P/ 7/ 8 ( 3 2 o r 6 4 b it )
6
Minimum Value
17
Humidity Unit
17
7
Records Indication
18
Records
PC So f t w are:
18
8 Network Strength (wifi/gprs)
19
Logging Indication
19
9 USB Conneted
20
Alarm Indication
7
20
21
22
(LCD Working Temperature -30~70° C)
2 Ext ernal
M emo ry C ap acit y:
Samp le R at e:
16
MEM
LOG
1
2
-4 0 ~12 5
A ccuracy:
Po w er:
10
Battery Indicator
21 Switch and Log
D imensio ns:
11
Call Indicator (gsm/gprs)
22 ON/OFF
N et W eig ht :
110 V ac t o U SB A d ap t er, R echarg eab le Li-B at t ery
14 2 mm×77mm×2 8 mm
18 0 g
HIR90TTW Settings Prerequisites Check Sheet
Please collect the following information to simplify the configuration of the unit
LogLive Settings...
Unit SN:
(on back of unit and on probe leads)
APN:
(WiFi SSD,Password)
Server Address:
(IP of PC where software is installed)
Temp Unit:
(°C or °F)
Logging Interval:
(time in seconds... 15min=900 seconds)
HIGH (temp)
Ch1:
Ch2:
TronFlux Settings...
SMTP Section
Server:
(out-going email server address)
Port:
(number)
SSL:
(check = yes)
Account:
(name@email.com)
Password:
(of email account)
Management Platform Settings...
Instrument Manage section
enter unit s/n:
Group Manage section
Group Name:
(used to separate loggers - 1 group name needed)
User Manage section
Name(s):
Password(s):
E-mail(s):
Login Manage section (for Administrator)
Username:
Password:
E-mail:
LOW (temp
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising