passive infrared aisle (long range) occupancy sensor (osacwi-wh)

passive infrared aisle (long range) occupancy sensor (osacwi-wh)
PASSIVE INFRARED AISLE (LONG RANGE) OCCUPANCY SENSOR (OSACWI-WH)
FEATURES
• Fast, Sim­ple In­stal­la­tion: Easy base mount, three wire connection (low voltage) and
twist-and-lock detector attachment.
• Self-Adjusting: Internal microprocessor con­tin­u­al­ly analyzes, evaluates and adjusts the
infrared sen­si­tiv­i­ty and time delay. Per­for­mance is kept at a max­i­mum and user com­
plaints are eliminated.
• Multi-element, long range lens
• Flexible Base Mounting: Supplied twist-and-lock base mount permits fast alignment.
Supplied cover hides mounting hardware and wires. Can be used with raceways for
hard surface installations. Adjustable canopy for wall or ceiling mount.
• Range & Coverage: Up to 100 ft. for gross body motion or forklift. Max. 33.2 feet wide.
• Custom off-white color matched for shaded ceiling/corner spaces and most common
ceiling tiles.
DIMENSIONS
• High Motion Sensitivity: The large lens area and multi-element lens design give excellent
range and sensitivity.
• Ambient Light Recognition: A Light Sensor prevents lights from turning on when the
room is adequately lit by natural light.
6-7/16”
(163mm)
4-1/4”
(107mm)
4-11/16”
(119mm)
• Non-Volatile Memory: Learned and ad­just­ed settings saved in protected memory are not
lost during power outages.
Long
Range
Lens
• Timer Setting Feature: Automatic – 30sec – 30min. Test mode – 6sec with auto exit
programming.
• Walk-Through: Provides increased energy savings by decreasing the time delay to
2.5min when someone momentarily walks through the monitored space.
2-13/16”
(71mm)
BASIC OPERATION - Specifically designed for long,
relatively narrow spaces such as hallways and corridors,
the OSACWI-WH Occupancy Sensor provides long range
and high sen­si­tiv­i­ty, utilizing a “long range” lens. This lens
provides coverage up to 100 ft. when mounted 10 ft. above
the floor. Can be mount­ed lower if needed.
• Uses OSPP Series Power Pack: Uses Class 2, 24 volt wiring, three wire connection (low
voltage). Multiple sensors can control single or multiple power packs.
• Power base (OSB15A) available for line voltage applications
• Device: High-impact housing and in­jec­tion molded plastic. Color coded wire leads are 6”
long (16.24 cm).
• Infrared Sensing: High sensitivity 9.8 micron detector dual element.
The mount­ing base, pro­vid­ed with the sensor, allows quick
and easy mount­ing in cor­ners, on walls or on ceilings.
The most common applications are factory storage areas,
warehouse aisles and corridors.
HOW THE OS AUTOMATICALLY ADAPTS
APPLICATIONS
• Cafeterias
• Hallways
• Loading docks
• Open offices
• Parking garages
• Storage rooms
• Warehouses
• Workspaces
• Vending rooms
Condition
Example
Self-Adaptive Reaction
Timer Left In Test Mode An installer accidentally leaves
Thes ensor remains in a 6 sec. the sensor in the 6 sec. timer
test mode.
test mode and the lights may
go off or on every 6 sec.
The sensor automatically
resets the timert o 10 min.
after 15 min of test mode.
False-On - The sensor
incorrectly turns the lights on.
The sensor detects movement
in the corridor or hallway and
the room lights turn on.
After an initial movement is
sensed,if another movement
is not sensed withinthe timer
setting then the delayed off
times etting is automatically
reduced.
False-Off - The sensor
incorrectly turns the lights off.
The sensor does not detect
movement because an
occupant sits virtually
motionless at a desk and the
lights turn off.
If motion is sensed within a
short period after the lights go
off, then the current delayed
off-time setting is increased.
Project Name
Catalog #
1-800-436-7800 (Support, Option 8)
www.lsi-industries.com
© 2016
LSI INDUSTRIES INC.
PASSIVE INFRARED AISLE (LONG RANGE) OCCUPANCY SENSOR (OSACWI-WH)
PRODUCT DATA
ADJUSTMENT RANGE
MOUNTING BRACKET
FIELD OF VIEW (in feet)
4.67 inch
TOP VIEW
Mounting
Base
60°
16.6
Base Cover
85°
4.23 inch
0
6.43 inch
16.6
SIDE VIEW
10
Major Motion, PIR
Sensor
0
0
14
42
71
100
OSWLR-I0W
DIP SWITCH SETTINGS
SWITCH
BANK A
A1
N/A
A2
N/A
A3
Manual Mode
A4
Walk-Thru Disable
BANK B
B1
Override to On
B2
Override to Off
B3
Test Mode
B4
LED Disable
SWITCH FUNCTIONS
OFF
SWITCH SETTINGS
ON
Auto Adapting Enabled
Walk-Thru Enabled
Auto Adapting Disabled
Walk-Thru Disabled
Auto Mode
Auto Mode
OFF’ON’OFF
LEDs Enabled
Lights forced On
Lights forced Off
Enter/Exit Test Mode
LEDs Disabled
PHYSICAL WIRING
Red (24VDC)
Black
Blue
(Control)
OSPPxx Series
Power Pack
*Bold items are factory defaults
Hot (Black)
SPECIFICATIONS
ELECTRICAL
Power Requirements
24 VDC, 15 mA (.36W) from OSPP Power Pack or
OSPB15A Power Base
Power Consumption
15mA Stand-by
Output
24 VDC active high logic control signal with short
circuit protection
NC-Brown
Common-Green
NO-Brown/White
To HVAC
System
Sensor
Black
Red
Black
Blue*
(occupancy)
Gray*
(photocell +
occupancy)
Red
Blue
Blue
Black
Line
120-277-347VAC
60Hz
White
Black
Blue*
(occupancy)*
Gray*
(photocell +
occupancy)
Neutral (White)
CONTROLS
Infrared Sensitivity
0 to 100%: red knob (factory setting: 75%)
Light Sensor
Blue knob 20 to 3,000 Lux. Factory set at 100% (Grey
wire required)
Time Delay
30sec-30min; black knob (Factory setting: 10min)
INDICATORS
Red LED
Infrared motion technology
ENVIRONMENTAL
Operating Temperature Range
32°F to 104°F (0°C to 40°C)
Relative Humidity
0% to 95% non-condensing, for indoor use only
OTHER
Mouting Height
8-10 feet
Listings
CUL/US Certified, meets ASHRAE Standard 90.1 and
CEC Title 24 requirements
Warranty
Limited Five-Year Warranty
ORDERING INFORMATION
PART NO. CAT NO.
596055
DESCRIPTION
OSACWI-WH Wall/Corner Mount PIR Corridor occupancy Sensor 24V DC
Project Name
Catalog #
1-800-436-7800 (Support, Option 8)
www.lsi-industries.com
© 2016
LSI INDUSTRIES INC.
Load
White
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising