OPTIKA Microscopes
OPTIKA
Illumination and sample positioning
ACCESSORIES
CLD-01 / CL-11.1 / CL-12 / CL-15.1 / CL-16.1 / CL-20 / CL-30 / CL-31 /
CL-41 / ST-100 / ST-110 / ST-111 / M-666 / ST-666
®
M
I
I
C
T
R
O
S
A
C
O
L
P
E
S
Y
ACCESSORIES
Illumination and sample positioning
ACCESSORIES
To achieve the ideal work situation, it is important to combine the right microscope with the right accessories.
We offer WIDE range of devices: external illuminator, moving stages, heating stages.
Choose the right accessories is an essential process in order to obtain the best performance from your microscope.
CLD-01
Cold light X-LED illuminator, 14W extra-efficiency system.
CL-15.1 Ring light Led illuminator, with 10-steps on-board brightness control.
CL-16.1 Ring light Led illuminator, with continuous and external brightness control.
CL-20
Ring light fluorescent bulb illuminator, with ON/OFF button.
CL-30
Double-arm Led illuminator, without brightness control.
CL-31
Double-arm Led illuminator, with brightness control.
CL-41
Double-arm X-Led3 illuminator, with brightness control.
ACCESSORIES Series - CLD-01
CLD-01
Cold light X-LED illuminator, 14W extraefficiency system.
Light source
High power 14W LED
Chromaticity coordinates (x,y)
0.320, 0.320 (pure white)
Optical power (with double-arm option)
Illuminance (at 10 cm distance): 70000 lux
Power supply
Brightness control potentiometer.
External power supply provided.
Input: 110/240 Vac 50/60 Hz; output: 6 Vdc 5A
Dimensions
Length: 200 mm
Width: 120 mm
Weight: 4,1 Kg
CLD-01 + CL-11.1
CLD-01 Accessories
The output can be coupled to the following accessories:
CL-11.1: Double-arm optical fiber guide with focusing lenses.
Arm length 500 mm.
CL-17: Focusing lens (pair) with built-in polarizer filter (for CL-11.1)
CL-12: Ring optical fiber guide (length 700 mm).
Guide diameter 16 mm. Diameter of the fixing ring: 55mm.
The circular end is suitable for all stereo series.
ACCESSORIES - Illuminators
CL-30
Double-arm Led illuminator.
Light sources: LED (x2);
With 2W high efficiency LEDs.
Chromaticity coordinates (x,y): 0.320, 0.320;
Luminous flux: 80 lm each arm;
Emission angle: 35°;
Power supply: 12Vdc, 1500 mA;
Without brightness control.
CL-31 Double-arm Led illuminator, with brightness control.
Light sources: LED (x2);
With 2W high efficiency LEDs.
Chromaticity coordinates (x,y): 0.320, 0.320;
Luminous flux: 80 lm each arm;
Emission angle: 35°;
Power supply: 12Vdc, 1500 mA;
With brightness control.
CL-31
CL-41
CL-41
Double-arm X-Led illuminator, with brightness control.
With 3,6W high efficiency X-LED3.
Chromaticity coordinates (x,y): 0.320, 0.320);
Luminous flux: 400 lm each arm;
Emission angle: 25°;
Power supply: 12Vdc, 1500 mA;
With brightness control.
CL-11.1
Double-arm guide for CLD-01, with focusing lenses.
Arm length 500 mm.
Each arm fitted with focusable lens adapter.
Optional accessory:
CL-17: lens pair with built-in linear polarizer.
CL-11.1
ACCESSORIES - Illuminators
CL-16.1
Uniform illumination on a wide
area. Number of single LEDs: 144
4 illumination sectors addressed
by individual buttons.
CL-15.1
CL-16.1
Ring light Led illuminator, with continuous and external brightness control.
External intensity light control. Number of LEDs: 144.
Four illumination sectors controlled by individual buttons. Diameter of the fixing
ring: 60mm. Suitable for all series.
CL-15.1
Ring light Led illuminator, with 10-steps on-board brightness control.
Intensity light control. Number of LEDs: 72.
Four illumination sectors controlled by a MODE button. Diameter of the fixing ring:
60mm. Suitable for all series.
CL-20
Ring light fluorescent bulb illuminator.
Fluorescence ring light illuminator, 8W. Diameter of the fixing ring: 60mm. Suitable
for all series.
Optional lenses for arms:
CL-21: Spare fluorescent lamp, 8W (for CL-20)
CL-20
CL-12
Ring optical fiber guide for CLD-01.
Lenght 700 mm, diameter 16 mm. The circular end is suitable for all series , by using
the three locking screws.
Diameter of the fixing ring: 55mm.
CL-12
ACCESSORIES
ST-100 Moving stage *
Manual positioning stage.
Dimensions: 185x145mm.
Range: 56mm (X) x 35mm (Y).
ST-110 Moving stage, with knobs *
Manual positioning stage, using knobs for X-Y movements.
Dimensions: 180x155mm.
Range: 75mm (X) x 54mm (Y).
ST-111 Moving stage, with micrometer screws *
Manual positioning stage, using micrometer screws.
Dimensions: 185x145mm.
Range: 25mm (X) x 25mm (Y).
Micrometer screws resolution: 0.01mm.
M-666 Heating stage for biological microscopes*
Temperature range: 20°C (room temperature) – 50°C.
Temperature setting resolution: 1°C.
Temperature measuring resolution: 0.1°C.
Display: LED display for set temperature.
LED display for measured temperature.
Power supply: Input: 110/220Vac 50/60Hz. Power: 50W.
ST-666 Heating stage for stereomicroscopes *
Temperature range: 20°C (room temperature) – 50°C.
Temperature setting resolution: 1°C.
Temperature measuring resolution: 0.1°C.
Display: LED display for set temperature.
LED display for measured temperature.
Power supply: Input: 110/220Vac 50/60Hz. Power: 50W.
ST-100
ST-110
ST-111
* The model of microscope that will be used with this accessory must
be specified.
M-666
ST-666
Headquarters and Manufacturing Facilities
OPTIKA S.r.l.
®
Via Rigla, 30 - 24010 Ponteranica (BG) - Italia - Tel.: +39 035.571.392 - Fax: +39 035.571.435 - info@optikamicroscopes.com
Optika Sales branches
OPTIKA Spain OPTIKA China ®
spain@optikamicroscopes.com
®
china@optikamicroscopes.com
OPTIKA USA usa@optikamicroscopes.com
OPTIKA Hungary hungary@optikamicroscopes.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising