equipment sourcebook

equipment sourcebook
the
equipment
sourcebook
2007
volume 6
INTRODUCTION
The Equipment Sourcebook
Since 1971, Henkel Corporation has designed, built, and integrated high quality equipment
solutions. From simple hand held devices to fully automated systems, Henkel offers a
complete line of standard off - the - shelf Loctite® brand dispensing and light curing
equipment which can easily be integrated into your manufacturing process.
From water thin liquids to high viscosity pastes, Loctite® brand equipment is capable of dispensing
and curing a wide variety of adhesives, sealants, and other industrial fluids:
Adhesives & Sealants
Acrylics
Anaerobics
Cyanoacrylates
Epoxies
Industrial Fluids
Hot Melts
Silicones
Urethanes
UV/Light Curing Adhesives
Accelerators/Activators
Greases
Inks
Lubricants/Oils
Paints
Primers
Solvents
Solder Pastes
In addition to our standard line of equipment, Henkel offers a number of resources to support your dispensing needs:
•
Custom Equipment Systems – We can modify any Loctite® brand standard system or customize a system
to meet your specific assembly needs.
Equipment Rental Program – Evaluate the performance of our equipment before making a capital investment.
• Equipment Website – Locate details on Loctite® brand standard and custom equipment; parts and accessories;
•
and equipment services. To learn more about our equipment, or to find the name and phone number of
your nearest authorized distributor, visit www.equipment.loctite.com.
•
Adhesives and Sealants Specialists – Henkel Adhesives and Sealants Specialists are available across the continent
to personally assist you with new assembly challenges or to help you re-engineer an existing application for
improved performance and cost savings using Loctite® brand products. Contact us at 1-800-LOCTITE (562 - 8483)
or visit www.loctite.com.
The Adhesive Sourcebook 2007,
volume 7
In addition to our dispensing
and curing equipment,
Henkel offers a complete
line of adhesives, sealants,
cleaners, lubricants, potting
compounds, and coatings.
Over 1,400 products in total!
To view our on-line catalog, visit
www.loctite.com or to request a
copy, send an email
to literature@loctite.com,
and reference the Adhesive
Sourcebook, LT-3355.
Engineering Services
Henkel now offers complete engineering services for projects
demanding expertise and support beyond the limits of our
standard technical services. As a result, our engineers and
scientists can quote the following value -added services:
•
•
•
•
•
On-site engineering assistance and consultation
Joint product development programs
Contract lab services and testing
Prototype testing and fixture preparation
Custom formulations
For more information on these and other Henkel Engineering
Services, contact your Henkel Adhesives
and Sealants Specialist at 1-800-LOCTITE (562 - 8483).
For additional information and the full line of equipment, visit www.equipment.loctite.com.
INTRODUCTION
Table of Contents
EQUIPMENT SERVICE SOLUTIONS . . . . . . . . . . . . . . 3
DISPENSING
DISPENSE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Loctite® Benchtop Peristaltic Dispenser . . . . . . . . . . . . . . . . . . . 6
Loctite® Bond- A -Matic® 3000 Dispenser . . . . . . . . . . . . . . . . . . 7
Loctite® Shot Miser™ Dispense System . . . . . . . . . . . . . . . . . . . . 8
Loctite® Posi-Link™ Dispense System
for Prepackaged Syringes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Loctite® Precision Syringe Dispensing System . . . . . . . . . . . . . 11
Loctite® Digital Syringe Dispensing System . . . . . . . . . . . . . . . 12
Loctite® Foot Pedal Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Loctite® Dial- A -Seal® Applicator . . . . . . . . . . . . . . . . . . . . . . . 13
Loctite® Pump- A -Bead™ II Dispenser. . . . . . . . . . . . . . . . . . . . 13
Loctite® Light Cure Acrylic Adhesive Dispensing System. . . . . 14
CONTROLLERS AND RESERVOIRS . . . . . . . . . . . . . . . . . 15
Loctite® Single Channel Automatic Controller . . . . . . . . . . . . . 16
Loctite® Spray Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . 17
Loctite® Digital Multi-Functional Controller . . . . . . . . . . . . . . 17
Loctite® Digital Dispense Controller . . . . . . . . . . . . . . . . . . . . . 18
Loctite® Shot Miser™ Valve Controller . . . . . . . . . . . . . . . . . . . 18
Loctite® Integrated Semi- Automatic Dispenser . . . . . . . . . . . . 19
Loctite® Bond- A -Matic® 3000 Reservoir. . . . . . . . . . . . . . . . . . 20
Loctite® 300 ml Cartridge Pusher . . . . . . . . . . . . . . . . . . . . . . . 21
Loctite® 2.25 Gallon Pressure Reservoir . . . . . . . . . . . . . . . . . . 21
Loctite® Shot Miser™ Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . 22
Loctite® 4 Liter Gravity Feed Reservoir . . . . . . . . . . . . . . . . . . . 22
HAND HELD APPLICATORS . . . . . . . . . . . . . . . . . . . . . . . . . 23
Loctite® 50 ml / 250 ml Hand Pumps. . . . . . . . . . . . . . . . . . . 24
Loctite® 1 Liter Collapsible Bottle Holder. . . . . . . . . . . . . . . . 24
Loctite® Soft Squeeze Bottles . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Loctite® 30 ml Manual Syringe Applicator . . . . . . . . . . . . . . 25
Loctite® 10 ml / 30 ml Syringe Manual Plungers . . . . . . . . . 25
Loctite® 50 ml Dual Cartridge Manual Applicator. . . . . . . . 25
Loctite® 50 ml Dual Cartridge Pneumatic Applicator . . . . . 26
Loctite® Caulking Gun Conversion Kits
for 50 ml Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Loctite® 200 ml / 400 ml Dual Cartridge
Manual Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Loctite® 200 ml / 400 ml Dual Cartridge
Pneumatic Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Loctite® Universal Metal Dispenser . . . . . . . . . . . . . . . . . . . . 28
Loctite® Fixmaster® Rapid Rubber Repair Dispenser . . . . . . 28
Loctite® 300 ml Pneumatic Cartridge Dispenser . . . . . . . . . . 29
Loctite® Foldable 300 ml Cartridge Applicator . . . . . . . . . . . 29
Loctite® 300 ml Pneumatic Cartridge Dispenser Retainer . . 29
TWO - PART VOLUMETRIC DISPENSING –
DUAL CARTRIDGE SYSTEMS. . . . . . . . . . . . . . . . . . . . . . 30
Loctite® Posi-Link™ Dispense System for Dual Cartridges . . . 30
TWO - PART VOLUMETRIC DISPENSING –
METER MIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Loctite® DuraPump™ Programmable Meter Mix System . . . . 33
Loctite® DuraPump™ Pneumatic Meter Mix System . . . . . . . . 34
Loctite® Meter Mix 1000 Dispense System . . . . . . . . . . . . . . . . 35
Loctite® Meter Mix 2000 Dispense System . . . . . . . . . . . . . . . . 36
Loctite® Meter Mix 3000 Dispense System . . . . . . . . . . . . . . . . 37
Loctite® Meter Mix Dispense Systems
Accessory Option Selector Guide . . . . . . . . . . . . . . . . . . . . . . . . 38
Loctite® Brand Meter Mix System Options and Accessories . . . 39
Loctite® Brand Meter Mix Feed System Options and Accessories
for Meter Mix 1000, 2000 and 3000 Dispense Systems . . . . . . 40
Loctite® Meter Mix Dispensing Systems
Pump Selector Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
HAND HELD HOT MELT APPLICATORS . . . . . . . . . . . . 43
Loctite® Hysol™ 050 / 050-HT / 050A . . . . . . . . . . . . . . . . . . . . 44
Loctite® Hysol™ 050-GAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Loctite® Hysol™ 050-LITE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Loctite® Hysol™ 075 / 075-LT . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Loctite® Hysol™ 175- AIR / 175- AIR-HT
Pneumatic Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Loctite® Hysol™ 175-SPRAY / 175-SPRAY-HT
Pneumatic Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Loctite® Hysol™ 175 Manual Applicator . . . . . . . . . . . . . . . . . 47
Loctite® Hysol™ Reactive Urethane Cartridge Dispenser . . . . 47
Loctite® Hot Melt Bench Mount Kit . . . . . . . . . . . . . . . . . . . . . 48
Loctite® Hot Melt Pneumatic Timer . . . . . . . . . . . . . . . . . . . . . 48
Loctite® Hot Melt Nozzles and Accessories . . . . . . . . . . . . . . . . 49
BULK HOT MELT SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . 50
Loctite® Hysol™ PUR Hot Melt 5 Gallon Pail Pump . . . . . . . . 51
Loctite® Hysol™ Bulk-12 System . . . . . . . . . . . . . . . . . . . . . . . . 52
Loctite® Hysol™ Bulk-14 System. . . . . . . . . . . . . . . . . . . . . . . . . 53
Loctite® Hysol™ Bulk-34 System . . . . . . . . . . . . . . . . . . . . . . . . 54
Loctite® Hysol™ Bulk Hot Melt System Applicators . . . . . . . . 55
Loctite® Hysol™ Bulk Hot Melt System
Hoses, Controllers, Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Loctite® Bulk Hot Melt System Nozzles and Accessories . . . . . 57
HAND HELD VALVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Loctite® LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . 59
Loctite® Manual Hand Held Applicator. . . . . . . . . . . . . . . . . . 60
Loctite® Pneumatic Hand Held Applicators . . . . . . . . . . . . . . . 61
Loctite® Vari-Drop™ Applicator . . . . . . . . . . . . . . . . . . . . . . . . 62
Loctite® Brand Hand Held Dispensing
Valve Fluid Compatibility Chart. . . . . . . . . . . . . . . . . . . . . . . 63
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Table of Contents
INTRODUCTION
INTRODUCTION
Table of Contents
VALVES & PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Loctite® Stationary Applicator Valve . . . . . . . . . . . . . . . . . . . . 65
Loctite® Micro Needle Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Loctite® Light Cure Dispense Valve . . . . . . . . . . . . . . . . . . . . . . 67
Loctite® Cyanoacrylate Dispense Valve . . . . . . . . . . . . . . . . . . . 67
Loctite® Diaphragm Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Loctite® Spray Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Loctite® Spray Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . 69
Loctite® Poppet Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Loctite® Stainless Steel Poppet Valve . . . . . . . . . . . . . . . . . . . . . 70
Loctite® Shot Miser™ Dispense Valve . . . . . . . . . . . . . . . . . . . . 71
Loctite® Positive Displacement Pump . . . . . . . . . . . . . . . . . . . . 72
Loctite® Rotospray 9000 Applicator . . . . . . . . . . . . . . . . . . . . . 72
Loctite® Brand Valve & Pump Fluid Capability Chart . . . . . . 73
PAIL PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Loctite® Low Viscosity Fluid Pumps . . . . . . . . . . . . . . . . . . . . . 75
Loctite® High Viscosity Paste Pump Systems . . . . . . . . . . . . . . 76
Loctite® Pail Pump Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 77
MONITORING SYSTEMS. . . . . . . . . . . . . . . . . . . . . . . . . . 78
Loctite® Fluorescence Detector . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Loctite® In-Line Flow Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . 79
Loctite® Fluid Waveform Analyzer, Signature Series. . . . . . . . 79
CONSUMABLES
DISPENSE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . 80
Loctite® Brand Dispense Tips . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Loctite® Brand Cartridge Accessories . . . . . . . . . . . . . . . . . . . . 81
Loctite® Brand Static Mix Nozzles and Accessories . . . . . . . . 82
Loctite® Brand Syringe Accessories . . . . . . . . . . . . . . . . . . . . . . 83
Loctite® Brand Dispensing
Spare Parts and Accessories . . . . . . . . . . . . . . . . . . . . . . 84
FUME FILTRATION SYSTEM
Benchtop Fume Filtration System. . . . . . . . . . . . . . . . . 96
O-RING FABRICATION
Loctite® Precision O - Ring Cut and Splice Tool . . . . . 97
LIGHT CURE
LIGHT CURE SOLUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . 98
Loctite® 7700 LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . 100
Loctite® 7703 LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . 100
Loctite® 7700-HD LED Light Source . . . . . . . . . . . . . . . . . . . . 101
Loctite® 7703-HD LED Light Source . . . . . . . . . . . . . . . . . . . . 101
Loctite® CureJet™ 405 LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Loctite® CureJet™ Indigo™ LED. . . . . . . . . . . . . . . . . . . . . . . . 102
WAND SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Loctite® Indigo™ 7720 Visible Light Wand System . . . . . . . . 104
Loctite® ZETA® 7735 UV Wand Systems. . . . . . . . . . . . . . . . . 105
Loctite® ZETA® 7740 UV Wand System. . . . . . . . . . . . . . . . . . 106
Loctite® ZETA® 7760 UV Wand System. . . . . . . . . . . . . . . . . . 107
CURE CHAMBERS & FLOOD SYSTEMS . . . . . . . . . . . . 108
Loctite® UVALOC 1000 UV Cure Chamber . . . . . . . . . . . . . . . 108
Loctite® ZETA® 7401 UV Chamber . . . . . . . . . . . . . . . . . . . . . 109
Loctite® ZETA® 7411-S UV Flood System . . . . . . . . . . . . . . . . . 110
Loctite® Indigo™ 7418 Visible Light Flood System . . . . . . . . . 111
Loctite® ZETA® 7420 Visible Light Flood System . . . . . . . . . . 112
LIGHT METERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Loctite® ZETA® 7011- A Dosimeter-Radiometer. . . . . . . . . . . . 113
Loctite® ZETA® 7011-V Dosimeter-Radiometer. . . . . . . . . . . . 113
Loctite® ZETA® 7021 Spot Radiometer . . . . . . . . . . . . . . . . . . 114
CURE CONVEYORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Loctite® ZETA® 7415 UV Benchtop Conveyor. . . . . . . . . . . . . . 115
Loctite® ZETA® 7610 UV Benchtop Conveyor. . . . . . . . . . . . . . 116
MOTION CONTROL
ROBOT DISPENSE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . 86
LIGHT SOURCES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Loctite® 200 Benchtop Robot Station . . . . . . . . . . . . . . . . . . . . 87
Loctite® 300 Benchtop Robot Station . . . . . . . . . . . . . . . . . . . . 88
Loctite® 400 Benchtop Robot Station . . . . . . . . . . . . . . . . . . . . 89
Loctite® 500 Benchtop Robot Station . . . . . . . . . . . . . . . . . . . . 90
Loctite® S440 Series SCARA -N Robot . . . . . . . . . . . . . . . . . . . . 91
Loctite® Electrodeless Lamp Assembly and Power Supply . . . 117
Loctite® High Intensity Ultraviolet Sources. . . . . . . . . . . . . . . 118
INDEX
Item Number Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
DISPENSE STATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Loctite® Advancing Slide Dispense Station . . . . . . . . . . . . . . . 93
Loctite® Single Rotary Dispense Station . . . . . . . . . . . . . . . . . . 94
Loctite® Dual Rotary Dispense Station . . . . . . . . . . . . . . . . . . . 94
Loctite® Brand Mounting Hardware,
Workbenches, and Guarding Enclosures . . . . . . . . . . . . . . . . 95
2
For additional information and the full line of equipment, visit www.equipment.loctite.com.
INTRODUCTION
Equipment Service
Solutions
As a full service supplier of equipment,
Henkel offers a wide variety of
Equipment Services to its customers.
FACTORY REPAIRS
REBUILD EXCHANGE PROGRAM
If you have equipment in need of repair, Henkel can restore it
to original operating specification. Customers often schedule
preventive repairs to coincide with annual shut downs. Henkel
can work with you to get your equipment up and running in
the fastest possible time frame. Rental equipment may be
available on a short term basis to minimize down time.
• Equipment is repaired using original factory parts
The Henkel rebuild exchange program
offers customers a cost effective way of
streamlining the repair of dispensing valves.
The rebuild program allows customers
to send in their old valve and receive
a reconditioned valve in return. Customers who
participate in this program typically keep a spare
valve in inventory so if a valve goes down it can be
replaced immediately. The valve in need of repair is
then sent to Henkel and a reconditioned valve is
shipped back to the customer for future use.
• All equipment is fully tested to original quality specifications
Advantages of the Rebuild Exchange Program are:
Benefits of Factory Repair Service include:
• Trained technicians evaluate equipment based on original
design specifications to identify critical and preventive
repair recommendations
• All repairs carry a 30 day labor and 90 day parts warranty
CALIBRATIONS
Henkel provides calibration services for all of its light meters.
All meters are calibrated to original calibration standards. Data
is collected before and after calibration and a calibration
certificate is issued that states test results. In addition, you can
sign up with Henkel for calibration reminders. All units are
also inspected during calibration for any potential repairs.
• Rebuilt equipment is less than
half the cost of a new unit
• Rebuilt equipment is shipped in
1 to 2 business days
• Highly trained technicians use
original factory parts
• All equipment is specially treated
with a Henkel patented technology
to prolong its useful life with reactive adhesives
• All rebuilds carry a 30 day labor and 90 day parts warranty
DISCOUNT EQUIPMENT
FIELD SERVICE
Henkel Technicians are available to travel to your location for
repair services, preventative maintenance, training or
assistance in setting up a new system. Whatever you need,
Henkel can provide the service.
Henkel is able to offer a wide range of used or discontinued
equipment at discounted prices. This equipment typically has
been used in our rental program or has been used for customer
demonstrations or trade shows. This equipment may have
cosmetic blemishes, but performs to original factory
specification. All equipment carries the same warranty as new
equipment and is fully tested and reconditioned prior to sale.
SPARE PARTS
Spare parts and accessories are available through the
equipment services group of Henkel. Most common spare parts
can be identified on our website at www.equipment.loctite.com. If
you cannot find the part you are looking for, our equipment
services group can help you identify that part and provide you
with a quote.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
3
INTRODUCTION
Equipment Service
Solutions
EQUIPMENT RENTAL
REQUEST EQUIPMENT SERVICES
Many of the equipment products that Henkel offers are
available for short term rental. Henkel’s equipment rental
program allows customers the flexibility to confirm the
performance of our adhesive and equipment risk-f ree before
investing in a purchase. If, during the first 30 days, you decide
that you would like to purchase the rental equipment, the
entire rental charge is credited toward your purchase.
To learn more about the services Henkel offers, you can visit
our website at www.equipment.loctite.com/service. In addition to
our services, the website offers manuals and technical
information on Lotite® equipment products.
The benefits of this program include:
• The performance of a new manufacturing process
can be confirmed before investing fully in the purchase
of equipment
• Short production runs can be accommodated without
having to buy equipment
• Equipment can be rented during the repair of
production equipment, minimizing any down time
By Internet
To request a quote or get more information, email your
request to equipment-customerservice@loctite.com.
By Telephone
If you wish to speak to us regarding an equipment service,
you can call 860-571-5174 to speak to an equipment services
representative.
If you have a question regarding equipment set up or
operation, our technical information staff is available to help.
To contact them, call 1-800-LOCTITE and choose the technical
service option.
LEASE-TO-OWN PROGRAM
Henkel offers a lease - to - own program for new equipment.
According to the United States Equipment Lessors Association,
80% of all companies use leasing to acquire some or all of the
machinery and equipment they use to run their business.
Henkel’s lease-to-own program provides an effective way for
your business to acquire almost any Henkel equipment. Leases
can be customized to each company’s needs. Our program can
also include other services and spare parts as part of the
equipment lease. Let us customize a lease program to meet
your needs.
PREVENTATIVE MAINTENANCE CONTRACTS
There are many misconceptions about preventative
maintenance. One such misconception is that PM is unduly
costly. This may be true for some components, but not all.
Without preventative maintenance, costs for lost production
time from unscheduled equipment breakdown will be
incurred. Also, PM will result in savings due to an increase in
effective system service life.
LOCTITE® EQUIPMENT WEBSITE
To better support our wide array of equipment services, our
Equipment web site provides easy access to all service options
and inquiries for all Loctite® Equipment you may be interested
in. Technical literature, Equipment Showroom locator,
operational videos, and much more, are all at your fingertips,
for quick and easy access. You can also choose to purchase
directly on - line using a major credit card. Select from our wide
array of adhesive dispensing and light curing equipment.
Shipping time for most items are just 1 to 2 business days.
Please visit the site at:
Long-term benefits of PM include:
• Improved system reliability
• Decreased cost of replacement
• Decreased downtime
• Better spare part inventory management
Henkel can create a PM contract that fits your specific
equipment and work with your maintenance staff to insure
maximum up time of your equipment.
4
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Dispense Systems
Dispense Systems
Loctite® brand dispense systems, available from Henkel, are designed to offer the total package
for fluid delivery. Whether you use a Loctite® brand adhesive product, or any other brand, these
complete systems are ready for immediate operation and offer the manufacturing flexibility
and reliability you’re looking for. Selection of a Loctite® brand complete dispensing system is
based on the product being used, package size, and process requirements.
PRODUCT
Item
Number
Dispense
Patterns
Used to
Dispense
Package
Types & Sizes
Viscosity
Range
Vacuum
Suck-Back
0 to
5,000 cP
N/A
VOLUMETRIC BOTTLE DISPENSERS – Dispense adhesive directly from product bottle with no reservoirs required.
Loctite® Benchtop
Peristaltic Dispenser
98548
Dots, Drops,
Beads
Instant Adhesives,
Light Cure/Acrylics,
Retaining Compounds,
Threadlockers
Any
COMPLETE PRESSURE-TIME BOTTLE DISPENSE SYSTEMS –
Equipped with all components needed to dispense a wide range of products in a variety of adhesive bottle sizes.
Loctite® Bond-A-Matic®
3000 Dispenser 0-15 psi
982719
Loctite® Bond-A-Matic®
3000 Dispenser 0-100 psi
982722
Loctite® Shot Miser™
Dispense System
See
page 8
SYRINGE DISPENSING SYSTEMS – Choose the Loctite
®
Dots, Drops,
Beads
Gel Adhesives,
Instant Adhesives,
Light Cure/Acrylics,
Retaining Compounds,
Threadlockers
250 ml bottle
1 lb. bottle
1 L bottle
2 kg bottle
200 g squeeze tube
Dots, Drops,
Beads
Instant Adhesives,
Light Cure/Acrylics, 250 ml bottle
Retaining Compounds, 1 lb. bottle
Threadlockers
Low
N/A
Medium to
High
Low to
Medium
N/A
Posi-Link™ Volumetric Dispense System for the highest level of dispense precision.
Loctite® Posi-Link™
Dispensing System
See
page 9
Dots, Drops,
Beads
Gel Adhesives,
Instant Adhesives,
Light Cure/Acrylics,
Epoxies
Loctite® Precision Syringe
Dispensing System
97006*
Dots, Drops,
Beads
Gel Adhesives,
Instant Adhesives,
Light Cure/Acrylics
Loctite® Digital Syringe
Dispensing System
883976
Dots, Drops,
Beads
Gel Adhesives,
Instant Adhesives,
Light Cure/Acrylics
Loctite® Foot
Pedal Dispenser
98049*
98050*
Dots, Drops,
Beads
Gel Adhesives,
Instant Adhesives,
Light Cure/Acrylics
Prepackaged
5 ml syringe
10 ml syringe
25 ml syringe
3 ml syringe
5 ml syringe
10 ml syringe
30 ml syringe
55 ml syringe
Low to
Paste
Yes
Low to
Paste
Yes
Low to Paste
Yes
Low to Paste
98049: No
98050: Yes
Medium to
High
N/A
Medium
to High
N/A
Low
N/A
THREAD SEALANT & ANAEROBIC GASKETING DELIVERY SYSTEMS –
Ensure consistent application of high viscosity thread sealants and anaerobic gasketing applications.
Loctite® Dial-A-Seal®
Applicator
998400
N/A
Pipe Sealants
Loctite® Pump-A-Bead™ II
Dispenser
986000
Beads
Anaerobic Gasketing
Beads on
Tubing OD
Light Cure Acrylics
50 ml tube
250 ml tube
1 L bottle
850 ml cartridges
TUBE BONDING – Light Cure Acrylic Delivery System.
Loctite® Light Cure
Acrylic Adhesive
Dispensing System
98445
2.0 to 6.0 mm
ID Tubing
* Syringe Air Line Adapter sold separately. See page 83.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
5
DISPENSING
Dispense Systems
V OLUMETRIC B OTTLE D ISPENSER
LOCTITE® BENCHTOP PERISTALTIC DISPENSER
Item Number: 98548
The Loctite® Benchtop Peristaltic Dispenser is a reliable and effective
volumetric dispenser for single - component, low viscosity fluids up to
5,000 cP, directly from the product bottle. It is great for applications
that require dispensing of fluids where a precise bead or specific flow
rate is necessary. This dispenser is electro - mechanically operated and
does not require the use of an air source.
Features:
• Air- free dispensing eliminates air in product avoiding
premature product clogging of cyanoacrylates
• Instant reverse for vacuum suck- back that shuts off
the flow of liquid and prevents dripping
• Adjustable post- delay time for vacuum setting
• Simple and convenient load mechanism provides
for easy tube changes
• Continuous or timed mode of dispense
• Large digital LED display
• Includes four (4) different feed line tubing sizes to
accommodate various product viscosities
TECHNICAL SPECIFICATIONS
Power Supply
110/220 VAC; 50/60 Hz
Power Consumption
0.3 amps
Dispense Time Range
0.01 to 99.9 seconds
Rotor Speed
Up to 120 rpm
Maximum Flow Rate
Theory of Operation
Minimum Drop Size
The hand held applicator with extended tubing and matching
nozzle is positioned through an eccentric rotor pump assembly
and then inserted into any product bottle. Rotation speed and
time of the rotor motion is then adjusted to dispense the precise
and repeatable drop or bead. The peristaltic motion of the rotor
imparts pressure on the tube and pumps product out of the
bottle. The rotor can then be set up to reverse after the dispense
cycle to provide suck- back and prevent dripping. Rotor direction
can also be adjusted to accommodate placing either end of the
tube in the product bottle. Digital time controls effectively
provide a wide range of dispense cycles to meet your specific
process requirements.
Dimensions
Up to 6 ml per minute
0.001 ml
7.2" W x 3.2" H x 6.7" D
Weight
6.6 lbs.
Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
Used to Dispense
Viscosity
0 to 5,000 cP
Dispense Range
0.001 ml up to 6 ml/minute
Package Types & Sizes
Suck-Back
Parts Included
Additional Information
Any
Programmable by reversing the direction of rotor
(1) Silicone Grease (1) Applicator Assembly (1) Manual
Feed Tubing:
1.6 mm O.D. x 1.0 m – Clear
2.5 mm O.D. x 1.0 m – Black
2.0 mm O.D. x 1.0 m – Clear
3.2 mm O.D. x 1.0 m – Black
Applicator Nozzles:
1.2 mm ID
1.9 mm ID
1.5 mm ID
2.4 mm ID
For Spare Parts and Accessories see pages 84-85.
Additional Accessories Sold Separately
98501 – Loctite® Applicator Holder
6
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Dispense Systems
C OMPLETE P RESSURE -T IME B OTTLE D ISPENSE S YSTEMS
LOCTITE® BOND-A-MATIC® 3000 DISPENSER
Item Numbers: 982719 and 982722
The Loctite® Bond-A-Matic® 3000 Reservoir Dispense Systems with applicator
are reliable, low cost pneumatic dispensers for single - component adhesives.
The systems arrive ready to dispense, complete with a 2 - liter pressure reservoir
and a Loctite® Vari -Drop™ applicator. This item is available with a 0 to 15 psi
pressure regulator which is well suited for low viscosity (< 3,000 cP) adhesives,
and a 0 to 100 psi regulator for higher viscosity (> 3,000 cP) adhesives.
Features:
• Improved dispensing control to eliminate waste,
and reduce operator fatigue
• PTFE lined, black feed line provides a light and moisture barrier
to ensure no - clog dispensing of light sensitive acrylics
and moisture sensitive instant adhesives
• Dispensing needle assortment allows you to select the needle
to deliver the bead or dot size needed for your application
• Easy - to - read pressure gauge
• Adjustable pressure regulator
Theory of Operation
Operation of this unit is easy. An operator will place
a bottle of product directly in the reservoir and tighten
the three handles on the cover. The unit is then pressurized
to the appropriate setting for optimal flow control.
The product is dispensed through a hand held Loctite®
Vari - Drop™ Applicator which, when depressed, allows
material to flow. A fully depressed finger switch maximizes
flow. By adjusting the flow screw on the finger switch,
a consistent flow can be set for repeatable dispensing.
TECHNICAL SPECIFICATIONS
Clean, dry air not to exceed 125 psig and filtered
with a maximum of 50 microns
Air Input
Air Output
982719: 0 to 15 psi
Product Viscosity
Maximum Distance from
System to Dispense Point
Dimensions
982722: 0 to 100 psi
982719: 0 to 3,000 cP
982722: >3,000 cP
48 inches
Overall
Internal
Reservoir
13.125" H x 9.875" W x 14.625" Diameter
10" H x 5" Diameter
Weight
18 lbs.
Used to Dispense
Gel Adhesives, Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
250 ml bottle / 1 lb. bottle / 1 L bottle
2 kg bottle / 200 g squeeze tube
Package Types & Sizes
Parts Included
(1) Loctite® Bond-A-Matic® Reservoir with 1⁄4" tank fitting
(1) Loctite® Vari-Drop™ Applicator Kit
(1) 1⁄4" Feed Line and Spring Strain Relief
(1) Anti-Bubble Tip & Sleeve
(1) Needle Assortment Kit
(1) Tube of Silicone Grease
(1) Manual
For Spare Parts and Accessories, see page 84.
For Dispense Tips, see pages 80-81.
Additional Information
Additional Accessories Sold Separately
984480 – Reservoir Liner
For additional information and the full line of equipment, visit www.equipment.loctite.com.
200022 – Empty 1 lb. HDPE Bottle
7
DISPENSING
Dispense Systems
LOCTITE® SHOT MISER™ DISPENSE SYSTEM
Combination of Item Numbers: 98079, 98085 and 98090
The Loctite® Shot Miser™ Dispense System is designed for both manual and timed dispensing of all single component products
with viscosities ranging from 0 to 80,000 cP. All wetted components are inexpensive and disposable, resulting in low maintenance
costs and minimal downtime. The complete system requires the purchase of three separate components; a reservoir, controller, and
dispense valve. The reservoir will directly accept 250 ml and 1 pound product bottles (but not 1 liter containers). The operating
manual and all controls are in both English and Spanish.
LOCTITE® SHOT MISER™ VALVE CONTROLLER Item Number: 98079 (see page 18)
Features:
• Electro - pneumatic timer/controller for dispense valve
that directly interfaces with any Loctite® brand
automatic dispense valve (excluding item 97116)
• Multiple range, adjustable timer (0.1 sec to 99 minutes)
• Foot switch actuated
LOCTITE® SHOT MISER™ DISPENSE VALVE Item Number: 98085 (see page 71)
Features:
• Pneumatically actuated pinch-tube
dispense valve capable of dispensing drops
and beads
• Disposable fluid path for fast, easy,
and low cost maintenance
• 1⁄4" diameter product feed tube
• Adjustable valve stroke for enhanced
shot size control
LOCTITE® SHOT MISER™ 1 LITER RESERVOIR
Item Number: 98090 (see page 22)
Features:
• 1 liter internal capacity reservoir, directly
accepts all Loctite® brand product
bottles in 250 ml and 1 pound bottle
package sizes
• Adjustable pressure regulator, 0 to 100 psi
• Easy - to - read pressure gauge
(units in psi and bar)
• A pressure / vent valve and hand- tight
lid knobs allow for easy, no - tool bottle
changeover
• Tank fitting accommodates 1⁄4" diameter
product feed tube
TECHNICAL SPECIFICATIONS
Pneumatic Supply
120 VAC; 50/60 Hz
Fluid Pressure
100 psi maximum
Product Viscosity
The container of adhesive is placed in the product reservoir
and the system is pressurized using a pneumatic air source.
The controller’s analog adjustable timer controls the opening
and closing of the dispensing valve. The dispense cycle is
initiated by the pneumatic foot pedal. The amount of
dispensed adhesive is controlled by adjustment of air pressure,
valve open time, and the size of the dispensing needle.
0 to 80,000 cP
Controller
(98079)
Dimensions
Weight
3.5 lbs.
Dispense
Valve (98085)
Dimensions
6.375" H x 5.1875" W x 1.75" Depth
Reservoir
(98090)
Theory of Operation
60 to 100 psi minimum
Electrical Power
Weight
0.5 lbs.
Dimensions
(Overall)
13.3" H x 8.5" Diameter
(6.5625" diameter without stand)
Internal Reservoir
7" H x 3.75" Diameter
Weight
Used to Dispense
Package Types & Sizes
Parts Included
Additional Information
8
3.875" H x 6.0" W x 5.5625" Depth
8.5 lbs.
Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
250 ml bottle / 1 lb. bottle
(1) Shot Miser™ Reservoir with Stand
(1) Shot Miser™ Controller with Foot Switch
(1) Shot Miser™ Dispense Valve with 1⁄4" diameter
product feed tube
(1) Dispense Tip Sample Kit
(1) Valve Air Line
(1) Manual
For Spare Parts and Accessories, see page 84.
For Dispense Tips, see pages 80-81.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Loctite® Posi-Link™ Dispense System
for Prepackaged Syringes
the
+
Controller
Actuator
+
The END of wetted
components and adhesive
downloading
Nest
(Each Item Sold Separately)
LOCTITE POSI-LINK CONTROLLER
®
™
Item Number: 98377
Provides all operator interface and
control signals to actuator.
Features:
• Dose selection by volume
• Easy programming controller, with
storage capacity for 25 user defined
programs, reduces adhesive set-up waste
• Smallest footprint on the market to conserve benchtop space
• Automatic syringe engagement to ensure
easy and error- free syringe changeover
• Adhesive level monitoring with low level visual and digital outputs
• Fault detection with visual and digital outputs for clogged nozzles,
loss of pressure, and system faults
• In- cycle visual and digital outputs
• Foot switch, finger switch or PLC remote start activation
LOCTITE® POSI-LINK™ ACTUATORS
Item Numbers: See chart
Provides adhesive dispensing by effecting incremental
movements of syringe piston and displacing programmable
quantities of adhesive within syringe barrel.
Features:
• Flexible orientation in any position
• Easily fits below an industrial workbench or wall mounts
with brackets supplied to conserve benchtop space
• Lightweight remote dispense head has a “positive link” to
actuator via a 7 foot tether, allowing ergonomic hand held
dispensing or mounting directly on robotic arms
• Easily attaches to syringe nest (sold separately)
to accommodate alternate syringe barrel sizes
• Adhesive Pressure: Mechanically driven vs. traditional
air pressure driven, eliminating risk of air infiltration
into adhesive
• Suck- Back: Prevents drip at end of dispense, and is mechanical
driven vs. traditional air vacuum driven, eliminating risk of
adhesive being sucked into the system
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Compact controller and floor mounted actuator
leaves benchtop wide open for manual applications.
See pages 30-31 for more information on
Loctite ® Posi-Link™ for dual cartridge applications.
PRODUCT
Loctite®
Posi-Link™
5-25 Actuator
Loctite®
Posi-Link™
10-50 Actuator
Item Number
98378
98379 ‡
Application
Type
Recommended
for Hand Held
Recommended
for Mounted
or Robotic
Syringe
Barrel Size
5, 10, 25 ml
10, 25 ml
‡ See pages 30-31 for use with dual component
epoxy cartridges.
9
Dispense Systems
COMPLETE LOCTITE ® POSI-LINK ™ SYRINGE SYSTEM
AGE
of Volumetric Control
Loctite® Posi-Link™
Syringe System
The Loctite® Posi-Link™ Dispensing System is a programmable, volumetric dispense
system that is designed to provide the highest level of dispensing precision directly
from a disposable syringe barrel. No need to worry about product temperature or
product viscosity changes. This innovative, patent pending design utilizes a
“positive link” between a step motor and a mechanical plunger via a non compressible hydraulic fluid, to ensure precise adhesive dispensing down to
0.001 ml drop sizes. See Theory of Operation, page 10.
DISPENSING
Loctite® Posi-Link™ Syringe Nest Selection
Connects actuator to syringe barrel.
Features:
Loctite® Posi-Link™
Syringe System
Dispense Systems
LOCTITE® POSI-LINK™ SYRINGE NESTS Item Numbers: See chart
• No tool syringe changeover
• No contact with adhesive. Disposable syringes
are the only component in contact with the adhesive
• No adhesive downloading. Directly accepts Loctite®
brand pre - filled syringes, plus many other brands
Also available, 98501 –
Loctite® Applicator
Holder. See page 83.
5 ml
Syringe
10 ml
Syringe
25 ml
Syringe
Used With
98643
98644
98645*
Loctite® Posi-Link™
5-25 Actuator
N/A
98639
98640
Loctite® Posi-Link™
10-50 Actuator
* 98645 can only be used with product
viscosity up to 5,000 cP.
Use 98379 – actuator and 98640 – nest, for 25 ml
syringes over 5,000 cP. Suitable for
hand held applications.
TECHNICAL SPECIFICATIONS
PRODUCT
Loctite® Posi-Link™ Controller
Item Number
Power Source
Dimensions
Total Weight
Dispense Head Weight
98377
98378
98379
100/240 VAC; 47/63 Hz
34" H x 4" D x 5" W
12 lbs.
0.75 lbs.
100/240 VAC; 47/63 Hz
34" H x 4" D x 5" W
13 lbs.
1.5 lbs.
N/A
N/A
N/A
40 to 100 psi
7 feet
0.001 ml
40 to 100 psi
7 feet
0.001 ml
N/A
N/A
(1) Posi-Link™ Controller
(1) Foot Switch
Parts Included
Loctite® Posi-Link™ 10-50 Actuator
9' communication cable to actuator
5.375" H x 6" D x 6" W
2 lbs.
N/A
Air Supply
Posi-Link™ Electro/Hydraulic Tether
Minimum Dispense Volume
Maximum Dispense Rate
Maximum Cycle Rate
Loctite® Posi-Link™ 5-25 Actuator
0.4 ml /second
0.4 ml /second
1 cycle per second
1 cycle per second
(1) Posi-Link™ Actuator
(1) Air Inlet Pressure Regulator/Gauge (1) 110 Power Cord
(1) 9' Communication Cable (2) Wall or Table Mounting Bracket
(1) Instruction Manual
For Spare Parts and Accessories, see pages 84-85.
Additional Information
988896 – Loctite® Syringe Finger Switch
Additional Accessories Sold Separately
Loctite® Posi-Link™ Actuator Functionality Diagram
Theory of Operation
A disposable syringe is effectively used as a metering piston/cylinder. Because the syringe barrel is of a known and constant
diameter, a given incremental movement of the syringe piston will displace a known volume of adhesive within the syringe barrel.
The controller unit is programmable to initiate a dispense cycle at the specific volumetric amount. It controls the electronic
signaling that activates the step motor inside the actuator housing. External air pressure provides constant force on the plunger
within the dispense head. With the initiation of a dispense cycle, the following 3 events occur simultaneously:
1. The step motor rotates a programmed number of revolutions, moving the lead screw,
and increasing the hydraulic volume of the stepping cylinder.
2. Hydraulic fluid flows from the remote dispense head to the stepping cylinder, releasing the plunger
within the dispense head to travel downward in a controlled incremental movement.
3. As the dispense plunger travels the controlled increment, it displaces (dispenses) a calculated volume
of adhesive from the syringe barrel.
AIR PRESSURE
CONSTANT ON
AIR PRESSURE
CONSTANT ON
REMOTE
DISPENSE
HEAD
SYRINGE NEST
PRE-PACKAGED SET
DISPOSABLE
SYRINGE PISTON
NON-COMPRESSIBLE
HYDRAULIC FLUID
ENCLOSURE
7 HYDRAULIC
HOSE
STEPPING CYLINDER
MOTOR
LEAD SCREW
[ON]
MOTOR
[OFF]
DISPOSABLE
SYRINGE BARREL
NO FLOW
ADHESIVE
DISPOSABLE
NEEDLE
10
STEP
MOTOR
STEP
MOTOR
FLOW
The RED represents the fluid path.
DISPENSING
Dispense Systems
S YRINGE D ISPENSING S YSTEMS
LOCTITE® PRECISION SYRINGE DISPENSING SYSTEM
Item Number: 97006
The Loctite® Precision Syringe Dispenser is a pressure -time -vacuum unit designed
to dispense adhesive products packaged in 3, 5, 10, 30, 55 and 300 ml cartridges.
The unit can be operated in the manual or automatic timed dispense mode to
dispense dots, beads, or to fill syringes.
Features:
•
•
•
•
Precision air pressure regulator for precise application of small dots
Precise digital display of dispense pressure, 0 to 100 psi
Digital timer display, for precise timer settings
Vacuum suck- back feature to prevent
dripping and stringing
• “Stand - up” design, requires minimal bench space
• Detects ±10% variation from set pressure and
alerts operator if detected
Power Supply
TECHNICAL SPECIFICATIONS
Selectable 90/260 VAC; 47/63 Hz
Theory of Operation
Air Supply
This system uses all digital controls to regulate time and air
pressure applied to an adhesive or fluid contained within any
syringe barrel. When the dispense cycle is initiated, a pulse of
air, either timed or manually controlled, is transmitted to the
top of the syringe barrel via an air line adapter (required and
sold separately). The amount of product dispensed is controlled
by the amount of pressure applied to the product, the length of
the dispense cycle, the size of the dispense needle, product
viscosity, and temperature.
Pressure Regulator
0 to 100 psi
Product Viscosity
Low to Paste
Minimum - 30 psi
Dispense Time Range
Dimensions
0.01 to 99.9 minutes
5.9" W x 9.0" H x 10.4" D
Weight
6.17 lbs.
Used to Dispense
Package Types & Sizes
Parts Included
Air Line Adapters
(Required for syringe
dispensing, see page 83.)
Additional Information
Gel Adhesives, Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
3 ml / 5 ml / 10 ml / 30 ml / 55 ml syringes
(1) Digital Syringe Controller
(1) Power Cord
(1) Foot Switch
(1) Manual
For 3 ml syringe dispensing: order 98656
For 5 ml syringe dispensing: order 98657
For 10 ml syringe dispensing: order 97208 or 97216
For 30 ml syringe dispensing: order 97244 or 97294
For 55 ml syringe dispensing: order 97245 or 98416
For Syringe Accessories, see page 83.
For Dispense Tips, see pages 80-81.
Additional Accessories Sold Separately for 97006 and 883976
98501 – Loctite®
Applicator Holder
988896 – Loctite® Syringe Finger
Switch Assembly. Used in place of the
foot switch to allow finger actuation
while holding the syringe barrel.
984625 – Loctite®
Vertical Syringe Stand
11
DISPENSING
LOCTITE® DIGITAL SYRINGE DISPENSING SYSTEM Item Number: 883976
Dispense Systems
The Loctite® Digital Syringe Dispenser is a semi - automatic dispensing system designed to dispense
adhesives and fluids packaged in 3, 5, 10, 30, and 55 syringes and 300 ml cartridges. The unit has
digital timing control with decimal settings to 0.001 seconds for increased precision over typical
pressure - time systems. An adjustable pressure regulator controls a pulse of air, and when used in
conjunctions with an air line adapter attached to an adhesive syringe barrel, will provide a
controlled dispensed amount of adhesive. The system can be operated in the manual, incremental,
or timed (automatic) dispense mode to dispense dots, beads or to fill syringes.
Features:
TECHNICAL SPECIFICATIONS
• Vacuum suck-back can effectively control product
dripping or stringing
• Manual, Incremental, and Timed modes allow
a choice of adhesive dispensing methods
• Convenient “teach mode” to set time required
for desired dispense amount or volume
• Cycle counter is clearly displayed in the LCD screen
• The unit can be integrated into customer’s PLC
programming to initiate a dispense cycle
• Units can be stacked securely to save workspace
Power Supply
Universal Power Supply 110/230 VAC; 50/60 Hz
35 to 100 psi, 1⁄ 4" FNPT
Air Supply
Pressure Regulator
0 to 100 psi
Product Viscosity
Low to Paste
Dispense Time Range
0.020 to 99.999 seconds
Dimensions
6.0" W x 7.1875" H x 7.6875" D
Weight
2.6 lbs.
Used to Dispense
G, IA, LCD, RC, TL
Package Types & Sizes 3 ml, 5 ml, 10 ml, 30 ml and 55 ml syringes / 300 ml cartridges
Theory of Operation
The system is a pressure-time-vacuum dispense system. It
consists of an air regulator and pressure gauge to control
pressure, and an electrical timing circuit to control the dispense
cycle. When the dispense cycle is initiated, a pulse of air, either
timed or manually controlled, is transmitted to the top of the
syringe barrel via an air line adapter. The amount of product
dispensed is controlled by the amount of pressure applied to the
product, the length of the dispense cycle, the size of the
dispense needle, product viscosity, and temperature.
Parts Included
(1) Digital Syringe Dispenser with Universal Power Cord
(1) Foot Switch with Cord Lock
(1) Manual
(1) 10 ml & (1) 30 ml Syringe Adapter (1) Syringe Stand
(1) 6 mm OD air line x 6 ft.
(4) Air supply fittings
(1) Air Line Support Mast
(1) Needle Sample Kit
Additional Air
Line Adapters
For 3 ml syringe dispensing: order 98656
For 5 ml syringe dispensing: order 98657
For 10 ml syringe dispensing: order 97208 or 97216
For 30 ml syringe dispensing: order 97244 or 97294
For 55 ml syringe dispensing: order 97245 or 98416
(Available for syringe
dispensing, see page 83.)
Additional Information
For Dispense Tips, see pages 80-81.
Additional Accessories Sold Separately (see item 97006 – page 11.)
988896 – Loctite® Syringe Finger Switch Assembly. Used in place of the
foot switch to allow finger actuation while holding the syringe barrel.
LOCTITE® FOOT PEDAL DISPENSER Item Numbers: 98049 and 98050
The Loctite® Foot Pedal Dispenser is a manually controlled, pneumatic dispenser for use with 3, 5, 10, 30 and 55 syringes,
and 300 ml cartridges. It is designed as a floor unit to eliminate the need for bench space. The unit is capable of dispensing dots,
drops or beads of fluids ranging from medium viscosity liquids
to high viscosity pastes. The dispense cycle is controlled
by a manual foot pedal and an adjustable pressure regulator.
TECHNICAL SPECIFICATIONS
Item 98050 includes a suck- back feature to prevent dripping
Air Input
60 to 100 psi
when dispensing low viscosity fluids.
Air Output
Features:
•
•
•
•
Simple hands - free operation
Adjustable pressure regulator, 20 to 100 psi
Easy - to -read pressure gauge
Available vacuum suck- back,
1 to 15 in. Hg, to
prevent dripping
• Designed as floor unit to
eliminate the need for
bench space
98049: No
98050: 1 to 15 in. Hg vacuum
98049: 8.0" W x 4.675" H x 4.375" D
98050: 8.0" W x 4.675" H x 5.0" D
Dimensions
Weight
98049: 3.7 lbs.
Used to Dispense
Gel Adhesives, Instant Adhesives, Light Cure/Acrylics
Package Types & Sizes
98050: 4.1 lbs.
3 ml, 5 ml, 10 ml, 30 ml and 55 ml syringes / 300 ml cartridges
(1) Foot Pedal Dispenser (Air Line Adapter sold separately)
(1) Manual
Parts Included
Air Line Adapters
(Required for syringe
dispensing, see page 83.)
When the foot pedal is actuated, a pulse of air is transmitted
through an air line adapter (sold separately) to the top of the
syringe barrel, pushing a controlled amount of material out of
the dispense tip. The amount of product dispensed is controlled
by the amount of air pressure applied to the product, the length
of time the foot switch is depressed, the size of the dispense tip,
the product viscosity, and the temperature.
12
Low to Paste
Vacuum Suck-Back
Theory of Operation
Dispense Key
20 to 100 psi
Product Viscosity
Additional Information
For 3 ml syringe dispensing: order 98656
For 5 ml syringe dispensing: order 98657
For 10 ml syringe dispensing: order 97208 or 97216
For 30 ml syringe dispensing: order 97244 or 97294
For 55 ml syringe dispensing: order 97245 or 98416
For Syringe Accessories, see page 83.
For Dispense Tips, see pages 80-81.
Additional Accessories Sold Separately
98501 –
Loctite® Applicator
Holder
984625 –
Loctite® Vertical
Syringe Stand
G = Gel Adhesives IA = Instant Adhesives LCD = Light Cure/Acrylics RC = Retaining Compounds TL = Threadlockers
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
T HREAD S EALANT & A NAEROBIC G ASKETING D ELIVERY S YSTEMS
LOCTITE® DIAL-A-SEAL® APPLICATOR
Item Number: 998400
Dispense Systems
The Loctite® Dial - A - Seal® Applicator is a touch actuated, all-pneumatic applicator
for dispensing high viscosity Loctite® product onto threaded pipe fittings and
nipples. The system has a quick turn turret that is equipped with cavities for
1⁄ 16, 1⁄ 8, 1⁄4, 3⁄ 8, 1⁄ 2, 3⁄4 and 1 inch male pipe threads. The unit accepts 50 ml or
250 ml tubes or 1 liter wide mouth bottles. The product dispense quantity can
be adjusted with a rear adjustment knob. The upper limit per dispense cycle is
0.7 ml. It is recommended specifically for applying Loctite® PST® Thread Sealants,
Loctite® Vibra-Seal®, and Loctite® Anti- Seize products.
Features:
• Applicator is fed directly from a 50 ml tube,
250 ml tube, or one liter bottle
• A quick turn turret is equipped with cavities for
1⁄16, 1⁄8, 1⁄4, 3⁄8, 1⁄ 2, 3⁄4 and 1" male pipe threads
• Up to 0.7 ml of product can be dispensed per shot
• Adjustable dispense volume
• Suggested settings for each diameter fitting
are pre -printed on unit
TECHNICAL SPECIFICATIONS
Air Input
Turret Sizes
Dimensions
Used to Dispense
Package Types & Sizes
Theory of Operation
A turret head with a cavity for each size of pipe thread is
attached to the output of an air actuated, positive displacement
pump. The operator presses a fitting down into the correct
cavity. The downward motion of the turret depresses a switch
that actuates the pump. A metered amount of material is
dispensed on the part.
Requires filtered (40 micron) lubricated air, 60 psi min.
Product Viscosity
Parts Included
Additional Information
Medium to High
1⁄16, 1⁄8, 1⁄4, 3⁄8, 1⁄2, 3⁄4
and 1" (NPT)
7.5" W x 12.2" L
(Height with 50 ml tube = 14.4" / Height with 1 L bottle = 16.7")
Loctite® 565™ PST®, 567™ PST® and Vibra-Seal®
Thread Sealants, and Loctite® brand Anti-Seize products
50 ml tube / 250 ml tube / 1 L bottle
(1) Loctite® Dial-A-Seal® Applicator
(1) Stand for 1 Liter Bottle
(1) 1 Liter Bottle and Cap
(1) 50 ml Tube Adapter
(1) Empty 50 ml Tube with Dispense Cap
(2) Elbow Fittings
(1) Tube Vent
(1) Feed Tube
(1) Tube Adapter
(1) Manual
For Spare Parts and Accessories, see page 84.
LOCTITE® PUMP-A-BEAD™ II DISPENSER
Item Number: 986000
The Loctite® Pump -A-Bead™ II is an all- pneumatic dispense system
for pumping Loctite® anaerobic gasketing materials from 850 ml
cartridges. A pneumatically - driven, reciprocating, positive
displacement piston pump provides for consistent dispensing and
ensures that air is not introduced into the product. This system is
well suited for stationary or bead dispensing. The Loctite® Poppet
Valve is also included and is ideal for dispensing continuous beads
at high pressures.
Features:
• Air piloted control signal initiates dispensing
• Air- driven, reciprocating, positive displacement piston pump
• Poppet - type dispensing valve
can be mounted onto a robotic arm
• Anti - drip feature
• Capable of dispensing 0.5 cc per second
• Visual signal will indicate “Product Cartridge Empty”
• Easily integrated into robotic dispensing stations
TECHNICAL SPECIFICATIONS
Air Input
All-pneumatic system, 60 to 100 psi, filtered to 40 microns
Product Viscosity
Compatible Materials
Medium to High
Loctite® brand de-aerated anaerobic gasketing
materials up to 1,000,000 cP viscosity
Pumping Rate
Theory of Operation
Dimensions
A full cartridge of material is loaded into the system and the
unit is switched to operate mode. Upon demand for dispensing,
i.e., pneumatic signal, material is fed from the cartridge to an
oscillating pump where the pressure is elevated to greater than
650 psi. Material is forced through a high - pressure hose to the
dispense valve where it is dispensed onto the part.
Weight
Used to Dispense
0.5 cc per second
16.3" H x 37.2" W x 9.3" D
80 lbs.
Loctite® Gasket Eliminator® and other
Loctite® brand Flange Sealants
Package Types & Sizes
Parts Included
Additional Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
850 ml cartridges
(1) Pump-A-Bead™ II
(1) Manual
(1) Poppet Valve Applicator
For Spare Parts and Accessories, see page 84.
13
DISPENSING
Dispense Systems
T UBE B ONDING
LOCTITE® LIGHT CURE ACRYLIC ADHESIVE DISPENSING SYSTEM
Item Number: 98445
The Loctite® Light Cure Acrylic Adhesive Dispensing System is a dispensing system
that rapidly and consistently applies a uniform coating of light cure acrylic
adhesives to the outer diameter of tubing without adhesive getting into the
internal surface of the tube. The dispenser can accommodate circular tubes from
2.0 mm to 6.0 mm in diameter (depending upon bushing size); with a maximum
engagement depth of up to 8 mm. Adhesive dispensing onto various diameter
tubes is accomplished by using specifically sized stainless steel bushings on the
dispense orifice. These bushings are easily interchanged on the dispenser. An
electric motor continuously re - circulates adhesive through the dispensing
bushing, thus eliminating waste and insuring adhesive is readily available
when tubing is inserted into the dispenser.
Adhesive Compatibility
This unit is designed for use with Light Cure Acrylic Adhesives only.
It should not be used with Cyanoacrylates or Light Cure Cyanoacrylates.
Features:
• Uniform and consistent tube coating
using simple one hand operation
• Bushing design insures no adhesive
contamination of internal tube surface
• Easy adhesive adjustment allows operator
to optimize adhesive dispense amount
• Optional bushings allow a variety of tube diameters
• Versatile system designed to apply adhesive to the outer
diameter of tubing with optional bushings available
• Design prevents light exposure of adhesive in the dispenser
• Electric pumping mechanism provides constant adhesive
supply and eliminates the need for compressed air
• Built - in adhesive level sight glass
Theory of Operation
The operator adjusts the adhesive application rate to optimize
the amount of adhesive applied to the assembly. When the
tubing is inserted into the bushing, an internal spring retracts
and allows the tubing to be inserted. Upon removing tube,
a uniform bead, up to 8 mm, is applied with no adhesive
getting onto any internal surface of the tube.
14
TECHNICAL SPECIFICATIONS
Utilities
110 VAC; 10 amps; 60 Hz
Overall Dispenser
Dimensions
Overall Transformer
Dimensions
9.0" H x 6.0" Diameter base
2.3" H x 3.5" W x 4.2" D
Dispense Unit – 7.7 lbs. / Transformer – 1.25 lbs. (Not Shown)
Weight
Adhesive Volume of
Dispenser
30 ml
NOT RECOMMENDED FOR TUBING BELOW 70 SHORE A
Parts Included
(1) Light Cure Acrylic Adhesive Dispensing System
(1) Transformer
(1) Retaining Ring Pliers
(1) Manual
(1) Power Cord
LCA Tubing Adhesive Applicator Bushing Selection Guide
(Standard Bushing)
Item Number
Description
Tubing OD Range
989038
2 mm (0.079 in.)
0.59 in. to 0.088 in.
989039
3 mm (0.118 in.)
0.089 in. to 0.128 in.
989040
4 mm (0.157 in.)
0.128 in. to 0.167 in.
989041
5 mm (0.197 in.)
0.168 in. to 0.207 in.
989042
6 mm (0.236 in.)
0.208 in. to 0.246 in.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Controllers & Reservoirs
PRODUCT
Item
Number
Controlled
Outputs
Number of
Dispense Valves
Advancing Slide
Controllers &
Reservoirs
Loctite® brand controllers and reservoirs can be used as the chief components, along with
a selection of Loctite® brand parts and accessories or with your own parts, to create a complete
custom dispensing system, designed to meet your specific needs and manufacturing goals.
Selection of a Loctite® brand controller and reservoir is based on the adhesive or fluid being
used, the package or container the adhesive or fluid is supplied in, and the overall
requirements of the manufacturing process.
Rotospray
MULTI-FUNCTION CONTROLLERS – Select when you need more functionality than just single valve dispensing.
Loctite® Single
Channel Automatic
Controller
97123
2
2 (Dependent)
97118 – 50 mm
97119 – 100 mm
97115
Loctite® Spray
Valve Controller
98521
1
1
N/A
N/A
Loctite® Digital
Multi-Functional
Controller
1022006
3
3 (Independent)
984691 – 50 mm
In conjunction with
Positive Displacement
Pump – 983330,
see page 72.
SINGLE FUNCTION CONTROLLERS – Select to operate a single dispense valve.
Loctite® Digital
Dispense Controller
97101
1
1
N/A
N/A
Loctite® Shot Miser™
Valve Controller
98079
1
1
N/A
N/A
PRODUCT
Item
Number
Pressure
Regulation
Package
Types & Sizes
Used to Dispense
Viscosity
Range
Low Level
Sensing
INTEGRATED RESERVOIR CONTROLLERS – Space saving and economical, combined controller and reservoir for valve dispensing.
Loctite® Integrated
Semi-Automatic
Dispenser
97010
97020
97007
97017
0 to 15 psi
0 to 100 psi
Gel Adhesives,
Instant Adhesives,
Light Cure/Acrylics,
Retaining Compounds,
Threadlockers
250 ml bottle
1 lb. bottle
1 L bottle
2 kg bottle
200 g squeeze tube
Low to
Medium
Medium
to High
No
Yes
No
Yes
RESERVOIRS – Select your reservoir based on product viscosity and need for low level sensing.
Loctite®
Bond-A-Matic®
3000 Reservoir
Loctite®
300 ml
Cartridge Pusher
Loctite®
2.25 Gallon
Pressure Reservoir
982720
982721
982726
982723
982724
982727
98022
98359
Low to
Medium
Yes
Yes
No
Yes
Yes
No
Gel Adhesives,
Instant Adhesives,
Light Cure/Acrylics,
Retaining Compounds,
Threadlockers
250 ml bottle
1 lb. bottle
1 L bottle
2 kg bottle
200 g squeeze tube
0 to 50 psi
Gel Adhesives,
Anaerobic Gasketing,
Light Cure/Acrylics,
Low Viscosity Silicones
300 ml cartridge
250 ml tube
Medium
Yes
0 to 60 psi
Gel Adhesives,
Instant Adhesives,
Light Cure/Acrylics,
Retaining Compounds,
Threadlockers
250 ml bottle
1 lb. bottle
1 L bottle
2 kg bottle
200 g squeeze tube
Low to
Medium
No
250 ml bottle
1 lb. bottle
200 g squeeze tube
Low
to High
No
Direct Fill
Low
to Medium
Yes
0 to 15 psi
0 to 100 psi
Loctite®
Shot Miser™
Reservoir
98090
0 to 100 psi
Instant Adhesives,
Light Cure/Acrylics,
Retaining Compounds,
Threadlockers
Loctite® 4 Liter
Gravity Feed
Reservoir
982880
N/A
Retaining Compounds,
Threadlockers
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Medium
to High
15
DISPENSING
Controllers &
Reservoirs
M ULTI -F UNCTION C ONTROLLERS
LOCTITE® SINGLE CHANNEL AUTOMATIC CONTROLLER
Item Number: 97123
The Loctite® Single Channel Automatic Controller is a multi - function system for
operating one or two dispense valves while controlling peripheral equipment
such as advancing slides and rotor spray units. Process functions are programmed
by the front panel keyboard and aided by a visual display. High precision control
is possible with the fine tuning of both time and pressure variables. Control of
reservoir pressure, advancing slide delay, and rotor spray operation can all be
selected or removed from use individually. This system can be used with low level
sensors such as Loctite® Bond - A - Matic® reservoirs or integrated into fully
automatic production lines using the PLC interface.
Features:
• Fully programmable, independent controller
with permanent software set-up
• Front mounted keyboard and multilingual display for
easy system programming and dispense valve control
• Digital pressure readout for precise electronic
pressure regulation and monitoring of reservoir
and valve dispensing
• Digital time display and control of valve dispensing
• Capable of controlling one or two dispense valves with
advancing slide and rotor spray unit
Theory of Operation
TECHNICAL SPECIFICATIONS
Power Supply
58 to 116 psi (4 to 8 bar)
Air Output
1 to 100 psi (0.1 to 7 bar)
Number of
Dispense Valves
Dimensions
Operator pre -programming determines which devices are to
be used for a particular application. Once a particular set-up
is selected, valve pressure, open time and advancing slide
timing can all be adjusted to meet a specific dispensing need.
90/260 VAC; 47/63 Hz
Air Input
2 (Dependent)
9.0" H x 5.7" W x 10.2" Diameter
Weight
Parts Included
Additional
Information
6.5 lbs. (3 kg)
(1) Automatic Controller
(1) Power Cord
(1) Pneumatic Tubing, 6 mm O.D.
(1) Manual
For Spare Parts and Accessories, see page 84.
For Dispense Tips, see pages 80-81.
Additional Accessories Sold Separately
Bond-A-Matic® 3000 Reservoirs (982720 or 982723)
97118 – Loctite® Advancing Slide (50 mm Stroke)
97119 – Loctite® Advancing Slide (100 mm Stroke)
97211 – Loctite® In-Line Flow Monitor
97115 – Loctite® Electric Rotor Spray
Note: If used with advancing slide, only one dispense valve can be controlled.
16
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
LOCTITE® SPRAY VALVE CONTROLLER
Item Number: 98521
Controllers &
Reservoirs
The Loctite® Spray Valve Controller provides 2 independent air signals and is designed to work integrally with the Loctite® Spray
Valve (item 98520), providing the open / close signal and atomizing air supply, see page 69. The digital timing control can be
adjusted separately for Pre - Spray, Spray, and Post -Spray time sequences.
This timing flexibility allows the unit to be used for any single - acting
automatic control valve or hand held pneumatic valve.
This unit can also integrate with an external PLC.
Features:
• Microprocessor based timed controller
• Fully independent valve, open/close and
atomization air supply
• 3 separate timed sequences – pre - spray,
valve on, post - spray/valve off
• Timed or manual mode with foot pedal control
• All time modes maintained in memory
with AC power disconnected
TECHNICAL SPECIFICATIONS
Power Source
90/260 VAC; 47/63 Hz
Air Supply
Minimum 30 psi
Number of
Dispense Valves
1
Dimensions
Theory of Operation
Weight
Product flows from a reservoir under air pressure as provided by
the Loctite® Spray Valve Controller. The controller also provides
air to open/close the valve and a separate atomizing air source to
the spray valve nozzle assembly. Timing and pressure controls for
atomizing air, fluid line pressure, valve stroke adjustment,
height from surface, and material viscosity can be adjusted to
optimize required dispense quantity and coverage pattern.
Parts Included
2.5" H x 12.5" L x 7.6" D
5.5 lbs.
(1) Controller Unit and Power Cord
(1) 4' Air Supply Line and Filter
(1) Foot Pedal
Additional Accessories Sold Separately
982720 / 982723 –
Loctite®
Bond-A-Matic®
Reservoirs with
Low Level Sensors
989268 –
0.014 Nozzle Kit
989269 –
0.028 Nozzle Kit
982726 / 982727 –
Loctite®
Bond-A-Matic®
Reservoirs
984621 – Loctite® Replacement Foot Switch
LOCTITE® DIGITAL MULTI -FUNCTIONAL CONTROLLER
Item Number: 1022006
The Loctite® Digital Multi -Functional Controller is a versatile, programmable
controller designed to provide on / off digital timing and interface logic for up to
three independent functions, pneumatic or electric. A typical use for this unit
would be to operate a dispense valve, advancing slide mechanism, and a turntable
in a workstation. It is readily compatible with low level sensors from Loctite® brand
reservoirs and the Loctite® 300 ml Cartridge Pusher. It has an interface for two hand, anti - tie - down start switches that makes it ideal for workstation applications
by eliminating the potential for pinch points. It also includes an interface for
a part present sensor, a dispense confirmation sensor, and can provide interface
signals to a host PLC.
Features:
• Keypad with LCD display to program the on/off times of
multiple devices in 0.1 second increments
• Interface connections for reservoir low level sensors, part
present sensors, dispense confirmation sensors, slide
position switches, electrical motors, indicator lights, foot
switch, anti-tie-down switches, PLC communication, etc.
• Emergency Stop button on front face of the enclosure
• Fully modular for optimum system configuration
TECHNICAL SPECIFICATIONS
Electrical
Input voltage 100/240 VAC; 50/60 Hz 0.6 amps
Internal voltage: 24 VDC
Air Input
60-100 PSI-G, filtered, dry air at 1 CFM (minimum)
Number of
Dispense Valves
3 (Independent)
Dimensions
Theory of Operation
The Loctite® Digital Multi -Functional Controller, when used
with a Loctite® Dispense Valve and Reservoir, provides a
complete automated dispense system. The controller provides
digital timing control for any Loctite® brand automatic dispense
valve, advancing slide, turntable, or rotospray system. Dispense
time range is from 0.01 to 59.99 seconds in 0.01 second
increments for precise and repeatable dispensing.
11.375" W x 9.125" D x 8.0" H
Weight
5 lbs.
(1) Digital Multi-Functional Controller
(1) 24 VDC Power Supply
Parts Included
Additional Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
(1) Foot Switch Assembly
(1) Manual
For Spare Parts and Accessories, see page 84.
Additional Accessories Sold Separately
984691 – Loctite® Advancing Slide (2" Stroke)
1044248 – Loctite® 2-Hand Anti-Tie-Down Switch Set
8900550 – Loctite® PLC Interface Cable
1044249 – Loctite® Cable Connector Plug Kit
17
DISPENSING
Controllers &
Reservoirs
S INGLE -F UNCTION C ONTROLLERS
LOCTITE® DIGITAL DISPENSE CONTROLLER
Item Number: 97101
The Loctite® Digital Dispense Controller provides digitally timed dispense control for
all Loctite® brand automatic dispense valves. It controls the air supply to a remote
reservoir and the pneumatic opening of a dispense valve, both sold separately. It is
readily compatible with low level sensors from Loctite® Bond-A-Matic® Reservoirs and
the Loctite® 300 ml Cartridge Pusher. This unit is fully modular and can integrate
with an external PLC.
Features:
• Convenient touch pad for dispense time control
• Pneumatic output provides air pressure to a fluid pressure reservoir
• Fluid low level indicator and output to allow
protocol with plant PLC
• Fully modular for use with the Loctite® Bond-A-Matic®
Reservoir or the Loctite® 300 ml Cartridge Pusher and
Electrical Utilities
any dispensing valve
Air Input
Theory of Operation
Number of
Dispense Valves
The Loctite® Digital Dispense Controller, when used with a
Loctite® Dispense Valve and Reservoir, provides a complete
pressure - time or positive displacement dispensing system,
depending on the type of reservoir used. This unit is ideal for
manufacturing workstations.
Dimensions
Weight
Parts Included
Additional Information
TECHNICAL SPECIFICATIONS
90/260 VAC; 47/63 Hz
70 to 145 PSIG filtered (10 micron), dry air at 1 CFM (minimum)
1
9.5" H x 6.0" W x 11.0" D
4.6 lbs.
(1) Digital Dispense Controller (1) Power Cord
(1) Foot Switch Assembly
(1) Manual
(1) Terminating Plug
For Spare Parts and Accessories, see pages 84-85.
LOCTITE® SHOT MISER™ VALVE CONTROLLER
Item Number: 98079
The Loctite® Shot Miser™ Valve Controller is an economical choice that provides
both manual and timed dispense valve control for any Loctite® brand automatic
dispense valve. It features a multiple range timer that provides adjustment from
0.1 seconds to 99 minutes.
Features:
•
•
•
•
•
Electro -pneumatic timer/controller for dispense valve
Timed and continuous dispense modes
Multiple range, adjustable timer (0.1 seconds to 99 minutes)
Foot switch actuated
Rugged, all - steel enclosure with flat top
and bottom for easy stacking
• Directly interfaces with any Loctite® brand automatic
dispense valve (except item 97116)
TECHNICAL SPECIFICATIONS
Input Voltage /Cycles
Fuse
Number of
Dispense Valves
Dimensions
Weight
Parts Included
Additional Information
18
115 VAC; 50/60 Hz
1 amp, 250 VAC, 5 mm x 20 mm, Fast Acting
1
3.875" H x 6.0" W x 5.5625" D
3.5 lbs.
(1) Shot Miser™ Valve Controller
(1) Pneumatic Foot Switch
(1) Power Cord
(1) Manual
For Spare Parts and Accessories, see page 84.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Controllers &
Reservoirs
I NTEGRATED R ESERVOIR C ONTROLLERS
LOCTITE® INTEGRATED SEMI-AUTOMATIC DISPENSER
Item Numbers: 97007, 97010, 97017 and 97020
The Loctite® Integrated Semi-Automatic Dispense Systems combine a controller and
reservoir into a single unit. These popular units provide a less complex and more
cost effective dispensing solution when compared to systems with separate
reservoirs and controllers. Combined with the digital timing feature, this unit will
provide precise dispensing control with any Loctite® automatic dispense valve or
pneumatic hand held applicator, sold separately. The reservoir is large enough to
accept up to 2 kg bottles, and units can be equipped with low level sensing as
shown in the chart below.
Features:
• Equipped with a 0 to 15 psi, or a 0 to 100 psi
adjustable pressure regulator
• Easy - to -read pressure gauge
• Continuous or timed dispense mode from
0.01 to 99.9 seconds
• Drip funnel for reservoir lid during product changeover
• 97017 and 97020 offer low level sensors, and are
recommended when dispensing cyanoacrylate adhesives
Theory of Operation
The unit is connected to an external pneumatic supply, and
regulates the adjusted dispensing pressure during the
selected dispensing time. A bottle of adhesive is placed
directly into the integrated reservoir, and the reservoir lid is
clamped in place. It is then pressurized using clean, filtered
dry air. Air within the reservoir will push down on the liquid
in the bottle and force it through the product feed line to
the dispensing valve.
TECHNICAL SPECIFICATIONS
Power Supply
90/260 VAC; 47/63 Hz
Air Input
Air Output
Low Level Sensing
Product Viscosity
Minimum 30 psi
97007: 0 to 100 psi
97010: 0 to 15 psi
97017: 0 to 100 psi
97020: 0 to 15 psi
97007: No
97010: No
97017: Yes
97020: Yes
> 3,000 cP
0 to 3,000 cP
Dimensions
13.8" H x 14.5" W x 9.2" D
Reservoir Dimensions
4.75" diameter x 9.75" H
Weight
Used to Dispense
Package
Types & Sizes
Parts Included
Additional
Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
16.5 lbs. (7.5 kg)
Gel Adhesives, Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
250 ml bottle / 1 lb. bottle / 1 L bottle
2 kg bottle / 200 g squeeze tube
(1) Power Cord
(1) Manual
(1) Integrated Semi-Automatic Dispenser
(1) Foot Switch
(3) Drip Cups
For Spare Parts and Accessories, see pages 84-85.
For Dispense Tips, see pages 80-81.
19
DISPENSING
Controllers &
Reservoirs
R ESERVOIRS
LOCTITE® BOND-A-MATIC® 3000 RESERVOIR
Item Numbers: 982720, 982721, 982723, 982724, 982726 and 982727
The Loctite® Bond-A-Matic® 3000 Reservoirs, our most versatile and popular units,
can be used in a wide array of dispensing applications. These units are available in
2 dispensing pressure ranges for a wide range of product viscosities. The reservoir
can also be equipped with low level sensors that send an electronic signal to
a Loctite® brand controller (items 97101, 97123 or 1022006), sold separately.
Features:
•
•
•
•
User- friendly design
Can accommodate a variety of Loctite® brand product packages
Available with optional low level sensor
All pneumatic operation
Theory of Operation
Operation of this unit is easy. An operator will place a
bottle of product in the reservoir and tighten the three
handles on the cover. The unit is then pressurized to the
appropriate setting for optimal flow control. The product
is dispensed through an applicator, which when actuated,
allows material to flow. Flow rate of the product is
dependent on the valve selected, pressure, product
viscosity, and needle size.
TECHNICAL SPECIFICATIONS
Air Output
Product Viscosity
Low Level
Sensing
Dimensions
982720: 0 to 15 psi
982723: 0 to 100 psi
982721: 0 to 15 psi
982724: 0 to 100 psi
982726: 0 to 15 psi
982727: 0 to 100 psi
0 to 3,000 cP
> 3,000 cP
982720: 24 VDC
982723: 24 VDC
982721: 110 VAC
982724: 110 VAC
982726: N/A
982727: N/A
13.25" H x 9.875" W x 14.125" D
Internal Reservoir
Weight
10" H x 5" Diameter
18 lbs. unfilled
Used to Dispense
Gel Adhesives, Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
Package Types
& Sizes
250 ml, 1 lb., 1 L, 2 kg bottles / 200 g squeeze tube
Parts Included
Additional
Information
(1) Bond-A-Matic® 3000 Reservoir with 1⁄4" Tank Fitting
(1) 1⁄4" Feed Line and Spring Strain Relief
(1) Anti-Bubble Tip and Sleeve
(1) Squeeze Tube Adapter and Nut/Ferrule (982723 / 982727 only)
(1) 3⁄ 8" Tank Fitting and Spring Strain Relief (982723 / 982727 only)
(1) Manual
(1) Tube of Silicone Grease
For Spare Parts and Accessories, see pages 84-85.
Additional Accessories Sold Separately
Any Loctite® Brand Dispensing Valve
984480 – Reservoir Liner / 200022 – Empty 1 lb. HDPE Bottle
20
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
LOCTITE® 300 ML CARTRIDGE PUSHER
Item Number: 98022
Controllers &
Reservoirs
The Loctite® 300 ml Cartridge Pusher is designed for dispensing low to medium viscosity products. The cartridge pusher
mechanically applies pressure to the cartridge plunger using a pneumatically driven ram, removing the possibility of air
entrapment in the cartridge. There is a low level sensor that is compatible with Loctite® brand controllers (items 97101, 97123,
or 1022006). An automatic dispense valve will also be required for final application of the product. Controllers and valves are
sold separately. Not recommended for high viscosity or paste materials.
Features:
• Mechanical ram provides product pressure, eliminating risk of
inducing air into product, as is the case with pneumatic dispensers
• Equipped with a low level sensor that can be integrated to a PLC
or any Loctite® brand digital controller
• A grease reservoir is included which continually applies a thin film
of grease to the plunger shaft to maintain free operation of the ram
• Integral air pressure regulator/gauge
• The cartridge retainer can be removed for easy maintenance
• Can be mounted vertically or horizontally
Theory of Operation
The Loctite® 300 ml Cartridge Pusher is a front- loaded,
free - standing device that can be coupled with a Loctite® Digital
Dispense Controller, Loctite® Digital Multi - Functional Controller,
or integrated into an existing work cell. Pressurized air is
supplied to the air regulator to control the air pressure that
flows into the ram cylinder. A hand lever, pneumatic, three - way
valve channels the pressurized air into the pneumatic cylinder.
Moving the hand lever toward the cartridge sleeve causes the
piston to move forward, pressing product out of the 300 ml
cartridge through a product feed line. Moving the hand lever
up toward the air cylinder causes the piston to retract. A reed
switch assembly is located on the air cylinder, equipped with
an LED indicator. Once activated, the LED indicator will light
up and the switch will communicate a low level condition
to a Loctite® Digital Dispense Controller or Loctite® Digital
Multi - Functional Controller. The reed switch is activated by a
permanent magnet located on the piston within the air cylinder.
TECHNICAL SPECIFICATIONS
Air Inlet
1⁄ 8"
Air Input
50 psi maximum
Product Viscosity
Low to Medium Gel Adhesives
Dimensions
8.375" H x 5.8" W x 25.375" Length
Weight
10.6 lbs.
Gel Adhesives, Anaerobic Gasketing,
Light Cure/Acrylics, Low Viscosity Silicones
Used to Dispense
Package Types & Sizes
Parts Included
female NPT
250 ml tube / 300 ml cartridge
(1) 300 ml Cartridge Pusher
(1) Fitting Kit
(1) Manual
For Spare Parts, see pages 84-85.
For Cartridge Accessories, see page 81.
For Dispense Tips, see pages 80-81.
Additional Information
LOCTITE® 2.25 GALLON PRESSURE RESERVOIR
Item Number: 98359
The Loctite® 2.25 Gallon Pressure Reservoir is our largest stand-alone reservoir designed
for use with Loctite® brand pressure -time dispense systems, sold separately, and will
accommodate up to 2 kg packages. The unit is made of heavy, deep - drawn, one-piece steel
construction and comes equipped with a pressure regulator, gauge, pressure safety relief
valve, and product feed line connector.
Features:
•
•
•
•
Rugged construction
0 to 60 psi regulator
Pressure safety relief valve
1⁄ 4" NPT air line and 1⁄ 4" product feed line connectors
TECHNICAL SPECIFICATIONS
Pressure Range / Capacity
Product Viscosity
Dimensions / Weight
0 to 60 psi / 2.25 gallons
Low to Medium
18.5" H x 12.7" Diameter / 17 lbs.
Internal Reservoir
9.5" H x 9.3" Diameter
Used to Dispense
Gel Adhesives, Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
Package Types & Sizes
Parts Included
Additional Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
250 ml, 1 lb., 1 L, 2 kg bottles / 200 g squeeze tube
(1) 2.25 Gallon Pressure Reservoir
(1) Manual
For Spare Parts and Accessories, see pages 84-85.
21
DISPENSING
Controllers &
Reservoirs
LOCTITE® SHOT MISER™ RESERVOIR
Item Number: 98090
The Loctite® Shot Miser™ Reservoir is an economical choice for bottle dispensing operations. It is suitable for a full range of product
viscosities, up to 80,000 cP. The reservoir is limited to accept packages no larger than 1 pound product bottles.
Features:
TECHNICAL SPECIFICATIONS
• 1 liter internal capacity reservoir,
directly accepts product bottles
listed in chart
• Easy - to -read, 0 to 100 psi
pressure regulator
• Pressure /vent valve and
hand - tight knobs for easy,
no tool bottle changeover
• 1⁄ 4" product feed line connector
Pressure Range / Capacity
0 to 100 psi / 1 Liter
Product Viscosity
Low to High
Dimensions / Weight
13.25" H x 8.5" Diameter / 8.5 lbs.
Internal Reservoir
7.0" H x 3.75" Diameter
Used to Dispense
Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
Package Types & Sizes
Parts Included
Additional Information
250 ml bottle / 1 lb. bottle / 200 g squeeze tube
(1) Shot Miser™ Liter Reservoir
(1) 6' Product Supply Tube
(1) Anti-Bubbler Adapter & Sleeve (1) Spring Guard (1) Manual
For Spare Parts and Accessories, see pages 84-85.
Additional Accessories Sold Separately
998353 – Reservoir Liner
200022 – Empty 1lb. HDPE Bottle
LOCTITE® 4 LITER GRAVITY FEED RESERVOIR
Item Number: 982880
The Loctite® 4 Liter Gravity Feed Reservoir is used to gravity feed low to medium viscosity products to a dispensing system.
This unit is typically used in rotospray systems, but could be used for any gravity feed application. It can feed one to four
Loctite® Positive Displacement Pumps (item 983330),
sold separately. Low level sensing options are also available.
TECHNICAL SPECIFICATIONS
Features:
• For use with low to medium viscosity product
feeding a dispensing system
• Feeds up to four Loctite® Positive Displacement Pumps
• “Refill on the Fly” without stopping operation
• Low level sensing options for
integration with other controls
• Visual level capability
Theory of Operation
The reservoir is intended to be
mounted above the point of use,
thus allowing material to flow by
gravity to a dispense pump. Material
is poured into the reservoir and
replenished as required without
stopping the operation.
22
Low Level Sensor
Available as an option in 24 VDC or 120 VAC
Size of Reservoir
Four liters maximum
Product Viscosity
Dimensions
Low to Medium
7.3" W x 8.7" Depth x 12.75" H (19.625" H with lid up)
Internal Reservoir
12.0" H x 6.6" Diameter
Weight
4.5 lbs. unfilled
Used to Dispense
Retaining Compounds, Threadlockers
Package Types & Sizes
Parts Included
Additional Information
Direct Fill
(1) Manual
(1) 4 Liter Gravity Feed Reservoir
(1) Wall Mounting Bracket
(1) Reservoir Casement
(1) Sensor Mounting Bracket
(1) Parts Kit Containing:
(3) Reservoir Plugs
(4) Male Elbow Fittings
(1) Tube of Loctite® 565™ PST® Thread Sealant
For Spare Parts and Accessories, see pages 84-85.
Additional Accessories Sold Separately
982716 – AC Level Sensor Kit
982732 – DC Level Sensor Kit
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Hand Held Applicators
PRODUCT
Item
Numbers
Used to Dispense
BOTTLE DISPENSING – The most popular hand held bottle top dispensers for Loctite
®
Package Types & Sizes
Viscosity
Range
Type
brand threadlockers and other adhesive products.
Loctite® 50 ml / 250 ml
Hand Pumps
98414
97001
Retaining Compounds,
Threadlockers
50 ml bottle
250 ml bottle
Low to
Medium
Manual
Loctite® 1 Liter Collapsible
Bottle Holder
98311
Retaining Compounds,
Threadlockers
1 Liter
collapsible bottle
Low to
Medium
Manual
98345
All Fluids in 2 fl. oz. packages
98346
All Fluids in 4 fl. oz. packages
N/A
Low to
Medium
Manual
98347
All Fluids in 8 fl. oz. packages
Low to High
Manual
Low to High
Manual
Loctite® Soft
Squeeze Bottles
Hand Held
Applicators
Loctite® brand hand held applicators are ergonomically designed for the hand delivery of
adhesives and fluids directly from their original package. Whether pneumatic or manual,
each item is designed for the simple, clean, hand held dispensing of fluids, and to reduce
waste and operator contact over other methods. Selection of a Loctite® brand hand held
applicator is based on product type, package configuration, and process requirements.
SYRINGE DISPENSING – Simple manual dispensers for low volume syringe applications.
Loctite® 30 ml Manual
Syringe Applicator
Loctite® 10 / 30 ml
Syringe Manual Plungers
98026
Any fluid in a 30 ml syringe
including 25 ml syringes
30 ml syringe
98192
Any fluid in a 10 ml syringe
10 ml syringe (3 pack)
98193
Any fluid in a 30 ml syringe
30 ml syringe (3 pack)
TWO-PART DISPENSING – Simple and effective two-part dispensers to meet your lower precision dual cartridge application needs.
Loctite® 50 ml Dual
Cartridge Manual
Applicators
Loctite® 50 ml Dual Cartridge
Pneumatic Applicator
®
98472
Two-Component Epoxies,
Urethanes, Methacrylates
50 ml dual cartridge
Low to High
Manual
Two-Component Epoxies,
Urethanes, Methacrylates
50 ml dual cartridge
Low to High
Pneumatic
Two-Component Epoxies,
Urethanes, Methacrylates
50 ml dual cartridge
Low to High
Manual
High to
Paste
Manual
High to
Paste
Pneumatic
1034026
97042
Loctite Caulking Gun
Conversion Kits
for 50 ml Cartridges
98466
Loctite® 200 ml / 400 ml
Dual Cartridge
Manual Applicators
983436
Loctite® 200 ml / 400 ml
Dual Cartridge Pneumatic
Applicators
983437
98415
983438
200 ml dual cartridge
Two-Component Epoxies,
Urethanes, Methacrylates
985246
983439
400 ml dual cartridge
400 ml dual cartridge
200 ml dual cartridge
Two-Component Epoxies,
Urethanes, Methacrylates
985249
400 ml dual cartridge
400 ml dual cartridge
Loctite® Universal Metal
Dispenser for 200 ml /
400 ml Cartridges
985245
Two-Component Epoxies,
Urethanes, Methacrylates
200 ml and 400 ml
dual cartridges
High to
Paste
Manual
Loctite® Fixmaster® Rapid
Rubber Repair Dispenser
39635
Loctite® Fixmaster® Rapid
Rubber Repair Urethanes
400 ml Loctite®
Fixmaster ® Rapid Rubber
Repair dual cartridge
Medium to
High
Manual
300 ml cartridges
250 ml tubes
Medium to
High
Pneumatic
300 ml cartridges
Medium to
High
Manual
300 ml cartridges
Low to
Medium
Pneumatic
CARTRIDGE DISPENSING – Manual and pneumatic applications for 300 ml cartridges.
Loctite® 300 ml Pneumatic
Cartridge Dispenser
97002
Loctite® Foldable 300 ml
Cartridge Applicator
98500
Loctite® 300 ml
Pneumatic Cartridge
Dispensing Retainer
98319A
Gel Cyanoacrylates, Anaerobic
Gasketing, Light Cure/Acrylics,
Silicones
Gel Cyanoacrylates, Anaerobic
Gasketing, Light Cure/Acrylics,
Silicones
Gel Cyanoacrylates,
Anaerobic Gasketing,
Light Cure/Acrylics, Silicones
For additional information and the full line of equipment, visit www.equipment.loctite.com.
23
DISPENSING
B OTTLE D ISPENSING
LOCTITE® 50 ML / 250 ML HAND PUMPS
Item Numbers: 97001 and 98414
Hand Held
Applicators
The Loctite® 50 ml and 250 ml Bottle Hand Pumps are portable, precision,
bottle - top applicators that thread directly on any 50 or 250 ml bottle of
anaerobic product. Item 98414 is also supplied with a stand to better
balance the smaller 50 ml bottle. They are designed to dispense at any
angle from 0.01 to 0.04 ml without leaks or product waste. Not suitable
for cyanoacrylate adhesives, primers, or activators.
Features:
• Adjustable positive displacement,
0.01 ml to 0.04 ml of product
• Allows user to control amount
and positioning of the adhesive
• Converts product package into a portable dispenser
• Applicator nozzle accepts a variety of dispensing needles
• Bottle stand greatly improves 50 ml bottle stability
TECHNICAL SPECIFICATIONS
Loctite® brand 50 ml or 250 ml anaerobic product bottles
Compatibility
Product Viscosity
Low to Medium
Dimensions (97001)
4" H x 5.75" W x 1.5" Diameter- Pump
Dimensions (98414)
4" H x 5.75" W x 1.5" Diameter- Pump
4.5" H x 3.75" W x 2.25" Diameter- Stand
Theory of Operation
Used to Dispense
Each squeeze of the trigger will dispense single shots of
Loctite® brand threadlockers and retaining compounds from
0.01 to 0.40 ml, with viscosities up to 30,000 cP. This unit
requires no flushing, electricity, or air source.
Parts Included
Additional
Information
Low Viscosity Thread Sealants,
Retaining Compounds and Threadlockers
98414:
97001:
(1) 50 ml Hand Pump and Stand (1) 250 ml Hand Pump
(1) Needle Kit (1) Manual
(1) Needle Kit (1) Manual
(1) 988506 – Hand Pump
(1) 988506 – Hand Pump
Washers (3 pack)
Washers (3 pack)
For Dispense Tips, see pages 80-81.
For Spare Parts and Accessories, see pages 84-85.
LOCTITE® 1 LITER COLLAPSIBLE BOTTLE HOLDER
Item Number: 98311
The Loctite® 1 Liter Collapsible Bottle Holder is a lightweight holder
designed to facilitate the transfer of anaerobics from our 1 liter
collapsible containers. Its nickel plated steel construction is rugged
and durable. It resists corroding from moisture and adhesive build up, allowing repeated use.
TECHNICAL SPECIFICATIONS
Dimensions
6.0" H x 5.3" W x 7.1" D
Weight
Used to Dispense
Parts Included
0.25 lbs.
All approved 1 liter collapsible bottles
(1) 1 Liter Collapsible Bottle Holder
LOCTITE® SOFT SQUEEZE BOTTLES
PRODUCT
Loctite® Soft Squeeze Dispense Bottles are intended for use by
customers who wish to download Loctite® brand cyanoacrylate
adhesives from large containers to smaller, hand held packages.
These soft, thin walled polyethylene bottles are ideal for use at
manual workstations. A variety of bottle sizes and cap styles are
available. Bottles, caps,and dispense tips are sold separately.
5.5"
Item Number
98345
2 oz. Soft Squeeze Bottle
(50 pack)
98346
4 oz. Soft Squeeze Bottle
(50 pack)
98347
8 oz. Soft Squeeze Bottle
(50 pack)
98348
Dunce Cap with red sealer
cap for 2 oz. bottle (50 pack)
98349
Dunce Cap with red sealer cap for
4 oz. and 8 oz. bottles (50 pack)
98350
Luer-Slip Cap for 2 oz. bottle
(50 pack)
98351
Luer-Slip Cap for 4 oz. and
8 oz. bottles (50 pack)
TECHNICAL SPECIFICATIONS
Product Viscosity
Low to Medium
98345: 3.3" H x 1.5" Diameter
Dimensions
98346: 4.3" H x 1.9" Diameter
98347: 5.4" H x 2.4" Diameter
Used to Dispense
24
Cyanoacrylate Adhesives
Description
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
S YRINGE D ISPENSING
LOCTITE® 30 ML MANUAL SYRINGE APPLICATOR
Item Number: 98026
Hand Held
Applicators
The Loctite® 30 ml Manual Syringe Dispenser is a hand held,
manually - operated dispenser for any product packaged in a
standard 30 ml syringe. This dispenser provides a convenient,
cost- effective method to apply product.
Features:
•
•
•
•
Pistol configuration for ease of application
Full-hand trigger minimizes operator fatigue
Easy syringe loading
Smooth dispensing
TECHNICAL SPECIFICATIONS
Used to Dispense
Any fluid in a 30 ml syringe including 25 ml net fill syringes
Package Types & Sizes
30 ml syringes
Viscosity Range
Parts Included
Additional Information
Low to High
(1) 30 ml manual syringe applicator
(1) Manual
(1) Plunger
For Dispense Tips, see pages 80-81.
LOCTITE® 10 ML / 30 ML SYRINGE MANUAL PLUNGERS
Item Numbers: 98192 and 98193
The Loctite® 10 ml Manual Plunger (item 98192) is a plastic
plunger for use with 10 ml syringes (2 pack). The Loctite®
30 ml Manual Plunger (item 98193) is a plastic plunger for use
with 30 ml syringes (3 pack).
Theory of Operation
Place the front end of the plunger into the back
of the syringe. Dispense product by manually pushing
the back of the plunger.
TECHNICAL SPECIFICATIONS
Used to Dispense
All approved 10 ml and 30 ml syringes, including
pre-packaged syringes with a 25 ml fill
Package Types & Sizes
10 ml and 30 ml syringes
Viscosity Range
Additional Information
Low to High
For Syringe Accessories, see page 83.
T WO -PART D ISPENSING
LOCTITE® 50 ML DUAL CARTRIDGE MANUAL APPLICATORS
Item Numbers: 98472 and 1034026
The Loctite® 50 ml Dual Cartridge Manual Applicators are
hand held, manually - operated meter mix dispensers. These
dispensers provide a convenient, cost- effective method to
apply product with minimal waste. Item 98472 is compatible
with 1:1 and 1: 2 mix ratio products. Optional 4:1 plunger
(item 984209) and 10: 1 plunger (item 986086) are also
available for standard cartridges. Item 1034026 is used
exclusively for products packaged in 10:1 S - 50 cartridges.
TECHNICAL SPECIFICATIONS
Item Number
Used to Dispense
Package Types & Sizes
Parts Included
Additional
Information
Additional Accessories
Sold Separately
Replacement
Plungers
1034026
50 ml dual manual cartridge
Viscosity Range
Mix Ratios
Item 98472
98472
Two-Component Epoxies, Urethanes, Methacrylates
S-50 cartridge
Low to High
1:1 / 2:1 / 4:1 / 10:1
(1) 50 ml Dual Cartridge
Manual Applicator
(1) 1:1 Plunger
(1) 2:1 Plunger
(1) Manual
10:1
(1) 50 ml, 10:1-S Cartridge
Manual Applicator
(1) 10:1-S Plunger
For Additional Static Mix Nozzles and Accessories,
see page 82.
984209: 4:1 Plunger
986086: 10:1 Plunger
1 Mix Nozzle available
1034575: 10:1-S Mix Nozzle
983533: 1:1 Ratio
983534: 2:1 Ratio
1034024: 10:1 Ratio
Item 1034026
For additional information and the full line of equipment, visit www.equipment.loctite.com.
25
DISPENSING
Hand Held
Applicators
LOCTITE® 50 ML DUAL CARTRIDGE PNEUMATIC APPLICATOR
Item Number: 97042
The Loctite® 50 ml Dual Cartridge Pneumatic Applicator (item 97042) is a hand held, pneumaticallyoperated dispenser. It provides a convenient, cost - effective method for applying two -part adhesive products
with minimal effort and waste. The applicator can accept various 50 ml dual cartridge designs for both
1:1, 2:1 and 10:1 mix ratios.
Features:
• Lightweight, well balanced design for easy use
• Pneumatic assist assures reduced operator fatigue and
consistent adhesive application
• Integrated air pressure regulator
• Conveniently positioned thumb wheel with 5 pressure
adjustments to control dispense rate
• Quick acting trigger insures precise bead control
and minimizes product waste
• Versatile cartridge holder accepts dual
50 ml cartridges with 1:1, 2:1 and 10:1 ratios
TECHNICAL SPECIFICATIONS
Dimensions
Theory of Operation
Weight
Pneumatic air pressure is applied by pulling the trigger switch.
This causes the dual pistons to move forward, discharging both
adhesive components of the cartridge at the same rate. The
adhesive is mixed as it travels through a static mix nozzle
(available separately) to the working surface. The rate of adhesive
application can be adjusted by changing the air pressure using
the 5-position thumb wheel below the trigger.
Air Supply
Air Supply Fitting
Used to Dispense
Package Types & Sizes
Parts Included
Viscosity Range
Mix Ratios
Additional Information
LOCTITE® CAULKING GUN CONVERSION KITS
FOR 50 ML CARTRIDGES
14.0" L x 7.6" H x 2.4" D (292 mm L x 191 mm H x 58 mm D)
1.6 lbs. (725 g)
30 to 75 psi
1⁄ 4"
NPT male
Two-Component Epoxies, Urethanes, Methacrylates
50 ml dual cartridge
(1) 50 ml Dual Cartridge Pneumatic Applicator
(1) Manual
Low to High
1:1 / 2:1
For Static Mix Nozzles and Accessories, see page 82.
Item 98466
Item Numbers: 98466 and 98415
The Loctite® Caulking Gun Converters provide an inexpensive
means of converting a household caulking gun into a hand
held meter mix dispenser. Simply insert the converter into a
household caulking gun, and you are ready to go. An ideal
approach for the occasional user of 1:1, 2:1 and 10:1 ratio
two-part adhesives. Order Item 98466 for 1:1 or 2:1 ratio
adhesives. Order Item 98415 for 10:1 ratio adhesives.
Not recommended for high demand or
production line applications.
Item 98415
TECHNICAL SPECIFICATIONS
Viscosity Range
Mix Ratios
Used to Dispense
Package Types & Sizes
Parts Included
Household caulking gun not
sold by Henkel.
Additional Information
26
Low to High
1:1 / 2:1 / 10:1
Two-Component Epoxies, Urethanes, Methacrylates
50 ml dual cartridge
98466: (1) Instruction Sheet
(1) Caulking Gun
Converter
(1) 1:1 Ratio Plunger
(1) 2:1 Ratio Plunger
(2) 50 ml Static Mix
Nozzles (1:1, 2:1)
98415: (1) Caulking Gun
Converter
(1) 10:1 Ratio Plunger
(1) Instruction Sheet
(2) 50 ml Static Mix
Nozzles (10:1)
For Static Mix Nozzles and Accessories, see page 82.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Hand Held
Applicators
LOCTITE® 200 ML / 400 ML DUAL CARTRIDGE MANUAL APPLICATORS
Item Numbers: 983436, 983438 and 985246
The Loctite® 200 ml and 400 ml Dual Cartridge Manual Applicators are hand held,
manually -operated meter mix dispensers. Ideally suited for production line
applications, these applicators provide a convenient, cost-effective method of
applying product with minimal waste. These applicators are available for 1:1, 2:1
and 10:1 mix ratio products. A converter kit is also available for the 400 ml
applicator to accommodate 4:1 mix ratio products (see part numbers below).
Mix nozzles are sold separately.
List of Applicators
983436 – Loctite® 200 ml Dual Cartridge
Manual Applicator, 1:1 and 2:1 ratios
983438 – Loctite® 400 ml Dual Cartridge
Manual Applicator, 1:1 and 2:1 ratios
985246 – Loctite® 400 ml Dual Cartridge
Manual Applicator, 10:1 ratio
TECHNICAL SPECIFICATIONS
Item Number
983436
Viscosity Range
Mix Ratios
1:1 / 2:1
Used to Dispense
Package Types
& Sizes
Additional
Information
983438
985246
High to Paste
1:1 / 2:1
10:1
Two-Component Epoxies, Urethanes, Methacrylates
200 ml dual cartridge
400 ml dual cartridge
400 ml dual cartridge
For Static Mix Nozzles and Accessories, see page 82.
Additional Accessories Sold Separately
984211 – Loctite® 4:1 Conversion Kit
LOCTITE® 200 ML / 400 ML DUAL CARTRIDGE PNEUMATIC APPLICATORS
Item Numbers: 983437, 983439 and 985249
The Loctite® 200 ml and 400 ml Dual Cartridge Pneumatic Applicators are hand held,
pneumatically- operated meter mix dispensers. Ideally suited for production line
applications, these applicators provide a convenient, cost- effective method for
applying product with minimal waste. The adjustable dispense rate is set
via the integral air pressure regulator. The applicators are available
for 1:1, 2:1 and 10:1 mix ratio products. A converter kit is
also available for the 400 ml applicator to accommodate
4:1 mix ratio products (see part numbers below).
Mix nozzles are sold separately.
List of Applicators
983437 – Loctite® 200 ml Dual Cartridge
Pneumatic Applicator, 1:1 and 2:1 ratios
983439 – Loctite® 400 ml Dual Cartridge
Pneumatic Applicator, 1:1 and 2:1 ratios
985249 – Loctite® 400 ml Dual Cartridge
Pneumatic Applicator, 10:1 ratio
TECHNICAL SPECIFICATIONS
Item Number
983437
Air Pressure Supply
Viscosity Range
Mix Ratios
Adhesive Components
Used to Dispense
Package
Types & Sizes
Additional Information
983439
985249
125 psi (8.5 bar) maximum
High to Paste
1:1 / 2:1
1:1 / 2:1
10:1
2
2
2
Two-Component Epoxies, Urethanes, Methacrylates
200 ml dual
cartridge
400 ml dual
cartridge
400 ml dual
cartridge
For Static Mix Nozzles and Accessories, see page 82.
Additional Accessories Sold Separately
984210 – Loctite® 4:1 Conversion Kit
For additional information and the full line of equipment, visit www.equipment.loctite.com.
27
DISPENSING
Hand Held
Applicators
LOCTITE® UNIVERSAL METAL DISPENSER
Item Number: 985245
The Loctite® Universal Metal Dispenser is a hand held, manually- operated dispenser designed for use with two -part adhesives
packaged in 200 ml and 400 ml dual cartridges. The dispenser is capable of handling cartridges with 1:1, 2:1, 4:1 and
10:1 mix ratios. This tool is ideally suited for users with a need to occasionally dispense
an assortment of mix ratios or package sizes. Mix nozzles are sold separately.
Features:
• Accepts 200 ml and 400 ml two - component cartridges
• Mix ratios of 1:1, 2:1, 4:1, and 10:1
• Interchangeable plunger buttons allow
application of all mix ratios
• Dispenses low, medium, and high viscosity materials
Theory of Operation
Depress the thumb lever on the back of the dispenser and
pull the plunger back. Insert the cartridge, equipped with
a static mix nozzle, and push the plunger forward until it is
seated onto the cartridge. Dispense product by squeezing the
trigger. Dispense ratios are varied by changing the plunger
buttons supplied with the tool.
TECHNICAL SPECIFICATIONS
Viscosity Range
High to Paste
Adhesive Components
2
Used to Dispense
Two-Component Epoxies, Urethanes, Methacrylates
Package Types & Sizes
200 ml and 400 ml dual cartridges
Additional Information
For Static Mix Nozzles and Accessories, see page 82.
LOCTITE® FIXMASTER® RAPID RUBBER REPAIR DISPENSER
Item Number: 39635
The Loctite® Fixmaster® Rapid Rubber Repair Dispenser is a hand held, manually- operated
dispenser designed specifically for use with Loctite® Fixmaster® Rapid Rubber
Repair, a two - part adhesive packaged in 400 ml cartridges.
Features:
•
•
•
•
Wide front opening to fit specific cartridges
Dedicated 1:1 mix ratio
200 ml x 200 ml dual cartridges
Bottom support straps provide secure
cartridge location within frame
• Ability to handle high viscosity materials
TECHNICAL SPECIFICATIONS
Theory of Operation
Depress the thumb lever on the back of the dispenser and pull the
plungers back. Insert the cartridge, equipped with a static mix
nozzle, and push the plungers forward until they seat onto the
cartridge. Dispense product by squeezing the trigger.
28
Viscosity Range
Adhesive Components
Used to Dispense
Medium to High
2
Loctite® Fixmaster® Rapid Rubber Repair Urethanes
Package Types & Sizes
400 ml dual cartridges
Additional Information
For Static Mix Nozzles and Accessories, see page 82.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
C ARTRIDGE D ISPENSING
LOCTITE® 300 ML PNEUMATIC CARTRIDGE DISPENSER
Item Number: 97002
Features:
• Integrated pressure regulator
• Quick pressure relief
• Use with 300 ml cartridges and 250 ml squeeze tubes
Hand Held
Applicators
The Loctite® 300 ml Pneumatic Cartridge Dispenser is a hand held unit for dispensing product packaged in 300 ml cartridges and
250 ml squeeze tubes. It is especially useful for applications where larger systems and packages,
such as a 5 gallon pail pump system, are not desirable.
TECHNICAL SPECIFICATIONS
125 psi max with 300 ml cartridge
22 psi max with 250 ml squeeze tubes
Thread Diameter: R 1⁄4"
Pneumatic Hose: Inner Diameter - 6 mm
Air Inputs
Pneumatic Connection
Typical Applications:
Dimensions
The rate of application is controlled by
the integrated air pressure regulator.
The amount of product dispensed
is controlled by
the trigger.
Weight
8.0" H x 13.5" L x 1.5" D
1.8 lbs. (800 g)
Gel Cyanoacrylates, Structural Acrylics, Silicones,
Anaerobic Flange Sealants
Used to Dispense
Package Types & Sizes
300 ml cartridges
(1) 300 ml Pneumatic Cartridge Dispenser
(2) Spare Membranes
(1) Manual
Parts Included
Additional Information
For Cartridge Accessories, see page 81.
Additional Accessories Sold Separately
989347 – Adapter for 250 ml Squeeze Tubes
LOCTITE® FOLDABLE 300 ML CARTRIDGE APPLICATOR
Item Number: 98500
The Loctite® Foldable 300 ml Cartridge Applicator is a
hand held, manually- operated dispenser designed for all
products packaged in 300 ml cartridges. It has an innovative
folding trigger assembly that allows it to be stored in less space
or carried more conveniently than conventional household
caulking guns.
Features:
• Foldable trigger assembly for easy storage
• Durable frame for heavy duty use
• Dispenses high viscosity silicones and lubricants with ease
TECHNICAL SPECIFICATIONS
Dimensions
Weight
Used to Dispense
Package Types & Sizes
Parts Included
Additional Information
Open: 8.0" H x 13.0" L x 2.5" D
Trigger Folded: 4.0" H x 13.0" L x 2.5" D
0.6 lbs. (275 g)
Gel Cyanoacrylates, Structural Acrylics, Silicones,
Anaerobic Flange Sealants, Lubricants
300 ml cartridges
(1) Foldable Cartridge Applicator
(1) Manual
For Cartridge Accessories, see page 81.
LOCTITE® 300 ML PNEUMATIC CARTRIDGE DISPENSER RETAINER
Item Number: 98319A
The Loctite® 300 ml Pneumatic Cartridge Dispensing Retainer
provides controlled, pressure/time dispensing of adhesives in
300 ml cartridges when used in conjunction
with the Loctite® Analog Syringe Dispenser
(item 98417), Loctite® Precision Syringe
Dispenser (item 97006), or the Loctite® Foot
Pedal Dispensers (items 98049 and 98050).
Pressures up to 60 psi can be obtained
to effectively dispense low to medium
viscosity products and thixotropic gels.
Features:
TECHNICAL SPECIFICATIONS
Air Inputs
70 psi max with 300 ml cartridge
22 psi max with 250 ml squeeze tubes
Product Viscosity
Low to Medium
Dimensions
10.0" L x 2.5" D
Weight
Used to Dispense
Package Types & Sizes
Parts Included
Additional Information
1.8 lbs. (800 g)
Gel Cyanoacrylates, Anaerobic Gasketing,
Light Cure/Acrylics, Silicones
300 ml cartridges
(1) 300 ml Pneumatic Cartridge Dispensing Retainer and Cap
For Cartridge Accessories, see page 81.
• Quick twist open/close cap
• Use with 300 ml cartridges
For additional information and the full line of equipment, visit www.equipment.loctite.com.
29
DISPENSING
Loctite® Posi-Link™ Dispense System
for Dual Cartridges
Dual Cartridge Systems
Two-Part Volumetric
Dispensing
Two-Part Volumetric Dispensing
the
When you need high precision dispensing from your prepackaged dual cartridge
adhesive, the Loctite® Posi -Link™ Dispense System is the solution. This system offers
dispensing accuracy well beyond any pneumatic cartridge dispenser down to 0.001 ml
drop size. This system specifically excels at eliminating dispense variability due to
continuously changing viscosity (curing) in the mix nozzle. It can easily be integrated
into any automated process and provide process feedback to a plant PLC. Select your
system based on cartridge size and adhesive ratio requirements. You can choose
50, 200 or 400 ml packages for any 1:1, 2:1 or 10:1 ratio product.
AGE
of Volumetric Control
The END of wetted
components
COMPLETE LOCTITE ® POSI-LINK ™ DUAL CARTRIDGE SYSTEM
For 50 ml Dual Cartridges:
+
Controller
+
Actuator
Nest
For 200/400 ml Dual Cartridges:
Controller
+
Actuator
+
Nest
+
Pinch Tube
(Each Item Sold Separately)
LOCTITE POSI-LINK CONTROLLER Item Number: 98377
®
™
Provides all operator interface and control signals to actuator.
Features:
• Dose selection by volume
• Easy programming controller, with storage
capacity for 25 user defined programs, reduces
adhesive set-up waste
• Smallest footprint on the market to conserve benchtop space
• Automatic cartridge engagement to ensure easy and
error-free cartridge changeover
• Adhesive level monitoring with low level visual and digital outputs
• Fault detection with visual and digital outputs for clogged nozzles,
loss of pressure, and system faults
• In- cycle visual and digital outputs
• Foot switch, finger switch or PLC remote start activation
LOCTITE® POSI-LINK™ ACTUATORS Item Numbers: See chart
Provides adhesive dispensing by effecting incremental movements of dual pistons and displacing programmable
qualities of adhesive within the cartridge regardless of viscosity changes in the mix nozzle.
PRODUCT
®
Item Number
Dual Cartridge Size
™
Loctite Posi-Link 10-50 Actuator
98379*
50 ml
Loctite® Posi-Link™ 200-400 Actuator
98380
200, 400 ml
* See pages 9-10 for use with syringes.
Features:
• Flexible orientation in any position
• Easily fits below an industrial workbench or wall mounts with brackets
supplied to conserve benchtop space
• Lightweight remote dispense head has a “positive link” to actuator via a 7 foot tether,
allowing ergonomic hand held dispensing or mounting directly on robotic arms
• Easily attaches to the dual cartridge nests (sold separately) to accommodate alternate cartridge barrel sizes
• Mechanically linked dual plungers guarantee proper ratios are achieved
• Positive shut- off pinch tube available, which directly attaches to the mix nozzle, eliminating dripping
30
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LOCTITE® POSI-LINK™ 200/400 ML
DUAL CARTRIDGES NESTS
Item Number: See chart
Item Number: See chart
Connects the actuator
to the dual cartridge.
Connects the actuator
to the dual cartridge.
DISPENSING
LOCTITE® POSI-LINK™ 50 ML
DUAL CARTRIDGE NESTS
Loctite® Posi-Link™ Dual Cartridge Nest Selection
1:1 / 2:1 – 50 ml Cartridge
10:1 – 50 ml Cartridge
1:1 / 2:1 – 200 ml Cartridge
1:1 / 2:1 – 400 ml Cartridge
10:1 – 400 ml Cartridge
USED WITH
98641
98642
N/A
N/A
N/A
Loctite® Posi-Link™
10-50 Actuator
N/A
N/A
98662
98663
98664
Loctite® Posi-Link™
200-400 Actuator
Theory of Operation
A disposable dual cartridge is effectively used as a dual metering piston/cylinder. Because the individual chambers of a dual
cartridge are of a known and constant diameter, a given incremental measurement of the dual pistons will displace a known
volume of adhesive within each chamber at an exact ratio. This dual cartridge system functions identically to a Loctite® Posi-Link™
Syringe System, except that it has 2 plungers within the dispense head. These plungers simultaneously act on 2 chambers within
the dual cartridge. See Functionality Diagram on page 10.
LOCTITE® PINCH TUBE VALVE Item Number: 97141
TECHNICAL SPECIFICATIONS
Features:
• Valve attaches directly to
the end of the
square mix nozzle
• Provides positive no - drip
shut off, using disposable
pinch tube elements
FOR 50 ML DUAL CARTRIDGES:
OPTIONAL: 97141 – Valve +
97541 – 10 pack Replacement Tube Inserts + 98671 – Solenoid Valve
FOR 200/400 ML DUAL CARTRIDGES:
REQUIRED: 97141 – Valve +
97541 – 10 pack Replacement Tube Inserts
(98671 – Solenoid Valve included with actuator)
PRODUCT
Loctite® Posi-Link™ Loctite® Posi-Link™
Controller
10-50 Actuator
Item Number
Power
Source
Dimensions
Total Weight
98377
98379
98380
9' communication
cable
100/240 VAC;
47/60 Hz
100/240 VAC;
47/60 Hz
5.375" H x 6" D x 6" W 34" H x 4" D x 5" W
34" H x 4" D x 5" W
2 lbs.
13 lbs.
20 lbs.
N/A
2.0 lbs.
10.0 lbs.
Air Supply
N/A
40 to 100 psi
40 to 100 psi
Posi-Link™
Electro/Hydraulic
Tether
N/A
7 feet
7 feet
Minimum
Dispense Volume
N/A
0.001 ml
0.01 ml
Maximum
Dispense Rate
N/A
0.4 ml/second
1.0 ml/second
Maximum
Cycle Rate
N/A
1 cycle per second
1 cycle per second
Used to
Dispense
N/A
Dispense Head
Weight
(Includes Nest and
Pinch Tube Valve)
Parts Included
Loctite® Posi-Link™ 10-50 System, Integrated Robotic Solution using
a 50 ml dual cartridge, and showing wall-mounted actuator.
Loctite® Posi-Link™
200-400 Actuator
Additional
Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
(1) Loctite®
Posi-Link™
Controller
(1) Foot Switch
All dual 50 ml cartridge All dual 200 or 400 ml
1:1 / 2:1 / 10:1
cartridge 1:1 / 2:1 / 10:1
ratio adhesives
ratio adhesives
(1) Loctite® Posi-Link™ Actuator
(1) 9' Controller/Actuator Signal Cord
(1) 110 Power Cord
(1) Air Inlet Pressure Regulator Gauge
(1) Wall or Table Mounting Bracket
(1) Instruction Manual
For Spare Parts and Accessories, see pages 84-85.
For Static Mix Nozzles and Accessories, see page 82.
31
Two-Part Volumetric
Dispensing
• No tool cartridge changeover
• No contact with adhesive. Disposable syringes
are the only component in contact with the adhesive
Dual Cartridge Systems
Dual Cartridge Nest Features:
DISPENSING
Meter Mix Systems
Two-Part Volumetric
Dispensing
Two-Part Volumetric Dispensing
Loctite® Meter Mix Systems
When your Loctite® two - part adhesive application takes on a larger dimension, Henkel has the
two - part volumetric dispensing solution with our high precision Loctite® Meter Mix Dispense
Systems. You can choose either fixed and variable ratio units for any of our featured systems and,
together with a wide selection of reservoir systems, hoses, valves and other accessories, customize
your system to meet your application requirements.
NEW
NEW
PRODUCT
Loctite® DuraPump™
Programmable Meter
Mix System
Loctite® DuraPump™
Pneumatic Meter
Mix System
Loctite®
Meter Mix 1000
Dispense System
See page 33 for
more information
See page 34 for
more information
N/A
N/A
988900: Low Flow
988902: High Fow
988901: Low Flow
988903: High Flow
Loctite®
Meter Mix 2000
Dispense System
Loctite®
Meter Mix 3000
Dispense System
988906
988908
988907
988909
MACHINE RATIO CAPABILITIES /ITEM NUMBERS
Fixed
Variable
PERFORMANCE SPECIFICATIONS
Dispense Range
0.40 cc to 28 cc
Cycle Rate
0.51 cc to 25 cc (Fixed), 0.51 cc to 21.37 cc (Variable)
Up to 20 per minute
Up to 30 per minute
1:1 to 10.0:1
1:1 to 9.76:1 (Fixed), 1:1 to 41.56:1 (Variable)
2000 psi
60 psi
Mix Ratio Range by Volume
Maximum Product Feed Pressure
WETTED COMPONENT MAKEUP
Abrasion Resistant Pumps
Mild Steel Pumps
Inert Pumps
Standard
Standard
Optional
Optional
Optional
Not Required
Not Required
Standard
Standard
Standard
Standard
Standard
Optional
Optional
Optional
Standard
Standard
N/A
N/A
N/A
Optional
Optional
Optional
Optional
Optional
N/A
N/A
Optional
Optional
Optional
N/A
N/A
N/A
Optional
Optional
Standard
Standard
Standard
Standard
Standard
DISPENSE VALVES
Mix Manifold
(accepts mix nozzle directly)
Hand Held Valve
with Trigger Pistol Grip
Hand Held Valve
with Lever Actuation
Adjustable Boom Mounted Valve
SHOT CONTROL CAPABILITIES
Manual/Operator Controlled Shot
Mechanically Adjusted
Limit Switch Shot Control
N/A
Standard
N/A
Standard
Standard
Pre-Programmed Electronic
Shot Size Control
Standard
N/A
N/A
N/A
Standard
Multiple Pre-Programmed
Shot Size Control
Standard
N/A
N/A
N/A
Standard
Touchscreen Machine Controls
Standard
N/A
N/A
N/A
Standard
Not Required
Not Required
Optional
Optional
Optional
Standard
N/A
N/A
N/A
Standard
Low/High Level Sensing Capable Optional – Low Level Only
N/A
N/A
N/A
Standard
Supervisor Machine Lock-Out
Pneumatically Adjustable
Flow Control
Auto-Purge Capable
Standard
N/A
N/A
N/A
Standard
Standard
Standard
Standard
Standard
Standard
Standard
N/A
N/A
N/A
Standard
Foot Switch Controlled
Standard
Standard
N/A
Standard
Standard
OTHER MACHINE FEATURES
Feed Accumulators for Bulk
Package Pressure Feed
Maintenance Totalizer
32
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
NEW
The Loctite® DuraPump™ Meter Mix Systems offer superior operating performance and durability for a wide range of two
component adhesive chemistries up to 10:1 ratios. These programmable models provide convenient touch screen digital control for
shot size, choice of 3 operating modes, and can easily be integrated with a PLC. Its innovative rod displacement pump design
insures excellent shot repeatability, low wear, and allows direct connection to high pressure feed systems. A static mix nozzle can
also be mounted directly on the integrated mixing manifold, eliminating
the need for a dispense valve in many applications. Optional reservoirs,
level controls, hoses, and valves are also available to complete your
specific process requirements.
Programmable Loctite® DuraPump™ Fixed Ratio Systems
Item Number
Mix Ratio
Shot Size Range
1041649
1:1
0.4 to 28 ml
1041644
2:1
0.4 to 21 ml
1041639
4:1
0.4 to 18 ml
1041638
10:1
0.4 to 15.5 ml
1041635
Custom*
Will vary based on ratio selected
* Custom ratios available from 1:1 up to 9.99:1.
Features:
• Includes 3 modes, including an incremental shot mode, where shots can
be set and dispensed without recharging
• No requirement for pump phasing on start- ups; just start up and go
• Direct flow shut off, no check valves to repair or replace
• Accepts external feed systems up to 2000 psi
without extraneous accumulators
• Superior pump wear life, especially well suited for
highly filled materials
• Mixing manifold discharge accepts mix nozzles directly,
Utilities
eliminating the need for a valve in many applications
• Available with optional low level sensors
Dimensions
Theory of Operation
Weight
The Loctite® DuraPump™ Programmable Meter Mix Systems
accurately meter dual liquid or semi - solid materials throughout
a wide range of viscosities and ratios. The Loctite® DuraPump™
assembly ensures high precision volumetric displacement at the
selected ratio. Shot size is controlled by a touch screen input.
Both liquids move simultaneously and separately into a mixing
manifold. A static mix nozzle is attached to the manifold for
effective mixing of two components prior to being applied.
Dispense Range/Cycle
Cycle Rate
Used to Dispense
Package Types
Parts Included
Additional Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
TECHNICAL SPECIFICATIONS
Electric: 110/250 VAC; 50-60 Hz
Pneumatic: 80-110 psi
27" H x 12.5" W x 12.5" D
80 lbs.
0.4 to 28 ml (ratio dependent) – see ratio chart
Up to 20/minute
Two-Part Epoxies, Two-Part Acrylics, Two-Part Polyurethanes
Any, excluding dual cartridges
1) Loctite® DuraPump™ Programmable Meter Mix
(1) Foot Switch
(1) Night Cap
(1) Ratio Cap
Feed system options and accessories
are sold separately. See page 39.
33
Two-Part Volumetric
Dispensing
Meter Mix Systems
LOCTITE® DURAPUMP™ PROGRAMMABLE METER MIX SYSTEM
Meter Mix Systems
Two-Part Volumetric
Dispensing
DISPENSING
LOCTITE® DURAPUMP™ PNEUMATIC METER MIX SYSTEM
NEW
The Loctite® DuraPump™ Pneumatic Meter Mix Systems offer superior operating performance and durability for a wide range of two
component adhesive chemistries, including MMA, up to 10:1 ratios. All of the pneumatic models provide operator shot size control
with pneumatic foot pedal or optional hand held trigger controlled dispense valve. Its innovative rod displacement pump design
insures excellent shot repeatability, low wear, and allows direct connection to high pressure feed systems. A static mix nozzle can
also be mounted directly on the integrated mixing manifold, eliminating the need for a dispense valve in many applications.
Optional reservoirs, level controls, hoses and valves are also available to complete your specific process requirements.
Pneumatic Loctite® DuraPump™ Fixed Ratio Systems
Item Number
Mix Ratio
Shot Size Range
1041648
1041643
1041641
1041637
1041633
1:1
2:1
4:1
10:1
Custom*
0.4 to 28 ml
0.4 to 21 ml
0.4 to 18 ml
0.4 to 15.5 ml
Will vary based on ratio selected
For MMA Chemistry
1041647
1041636
1041620
1:1
10:1
Custom*
0.4 to 28 ml
0.4 to 15.5 ml
Will vary based on ratio selected
* Custom ratios available from 1:1 up to 9.99:1.
Features:
• No electrical power required. Ideal for flammable adhesives (MMAs)
and remote locations where only compressed air is available
• No requirement for pump phasing on start - ups; just start up and go
• Direct flow shut off, no check valves to repair or replace
• Systems accept external feed systems up to
2000 psi without extraneous accumulators
• Superior pump wear life, especially well suited for
highly filled materials
Utilities
• Mixing manifold discharge accepts mixe nozzles directly,
eliminating the need for a valve in many applications
Dimensions
34
Theory of Operation
Weight
The Loctite® DuraPump™ Pneumatic Meter Mix Systems
accurately meter dual liquid or semi - solid materials throughout
a wide range of viscosities and ratios. The Loctite® DuraPump™
assembly ensures high precision volumetric displacement at the
selected ratio. Shot size is controlled by mechanical limit
switches. Both liquids move simultaneously and separately into a
mixing manifold. A static mixer is attached to the manifold for
effective mixing of two components prior to being applied.
Dispense Range/Cycle
Cycle Rate
Used to Dispense
Package Types
Parts Included
Additional Information
TECHNICAL SPECIFICATIONS
Pneumatic: 80-110 psi
27.0" H x 12.5" W x 12.5" D
80 lbs.
0.4 to 28 ml (ratio dependent) – see ratio chart
Up to 20/minute
Two-Part MMAs, Two-Part Epoxies, Two-Part Acrylics,
Two-Part Polyurethanes
Any, excluding dual cartridges
1) Loctite® DuraPump™ Pneumatic Meter Mix
(1) Foot Switch
(1) Night Cap
(1) Ratio Cap
Feed system options and accessories are
sold separately. See page 39.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Item Numbers: 988900, 988901, 988902 and 988903
The Loctite® Meter Mix 1000 Dispense Systems are versatile
dispensing systems for two -part adhesive chemistries and
incorporate a variety of feed system options. Available in fixed
or variable ratio, the compact design of the systems allows
benchtop dispensing. These machines come standard to accept
a hand held dispense valve (sold separately). Flow rate is
adjustable through the use of a pressure regulator. See technical
specifications for shot size and mix ratio ranges.
Features:
•
•
•
•
•
Variable mix ratio capability
Ratio check valves
Adjustable flow control
Mild steel or abrasion resistance pumps available
Operator controlled shot size
Theory of Operation
The Loctite® Meter Mix 1000 Dispense Systems accurately
meter dual liquid and semi- solid materials throughout
a wide range of viscosities and ratios. They contain two high
precision, volumetric displacement pump assemblies.
Selectable paired pump diameters determine the ratio for
a fixed system. The variable ratio unit utilizes a pneumatic
cylinder to adjust a lever- beam drive link to automatically
change ratio requirements. Dispensing is controlled using
a pneumatically controlled valve to open (sold separately).
Shot size is controlled using a manual vernier selector switch
and 4 - digit reference. Both liquids move simultaneously
through two dispensing hoses, a dispense valve and mixing
chamber /static mixer that provide the effective mixing of the
two components just prior to being applied.
TECHNICAL SPECIFICATIONS
Fixed
Variable
Low Flow System 1000L
988900
High Flow System 1000H
988902
Low Flow System 1000L
988901
High Flow System 1000H
988903
Utilities
Pneumatic: 80 to 100 psi
Dimensions
20.0" H x 15.0" W x 28.0" D
Weight
75 to 100 lbs.
Mix Ratio Range
by Volume
FIXED – 0.51 cc to 25 cc
VARIABLE – 0.51 cc to 21.37 cc
Up to 30 or more per minute, depending on material
viscosity, hose sizes, and mixer type
FIXED – 1:1 to 9.76:1
VARIABLE – 1:1 to 41.56:1
Used to Dispense
Two-Part Epoxies, Two-Part Acrylics, Two-Part Polyurethanes
Dispense Range/Cycle
Cycle Rate
Package Types
Cans, pails, drums, totes
(1) Loctite® 1000 Meter Mix System – Choice of either
8, 10, 15, 20, 25, 30 or 35 mm pump assemblies
(depends on ratio and dispense rate requirements)*
(1) Pump Mode Off/On pneumatic selector switch
(10) Static Mixers
(1) Night Cap
(1) Ratio Cap
Parts Included
Additional Information
**Feed system options and accessories are sold separately
and can be found on pages 39-40.
*See pages 41-42 to determine pump diameters
required for your application.
Additional Accessories Sold Separately**
•
•
•
•
Material reservoirs
Level sensors
Reservoir heaters
Hoses – various sizes
and lengths
For additional information and the full line of equipment, visit www.equipment.loctite.com.
•
•
•
•
Dispense valves
Follower plates
Desiccant dryers
Lock down lid
with agitator
• Abrasive resistant
wetted components
• All 316 stainless steel
wetted components
for MMAs
35
Two-Part Volumetric
Dispensing
Meter Mix Systems
LOCTITE® METER MIX 1000 DISPENSE SYSTEM – OPERATOR TRIGGER CONTROL
Meter Mix Systems
Two-Part Volumetric
Dispensing
DISPENSING
LOCTITE® METER MIX 2000 DISPENSE SYSTEM – MANUAL SHOT SIZE
Item Numbers: 988906 and 988907
The Loctite® Meter Mix 2000 Dispense Systems are versatile
dispensing systems for two -part adhesive chemistries and
incorporate a variety of feed system options. Available in
fixed or variable ratio, the compact design of the systems
allows benchtop dispensing along with a variety of feed
systems and package sizes. These machines are capable of
controlled shot size, dispensing through a pre - set mechanical
stroke adjustment. Flow rate is also variable through the use of
a pressure regulator. See technical specifications for shot size
and mix ratio ranges.
Features:
• Variable mix ratio capability
• Manual vernier shot size selector with
a 4 - digit reference gauge
• Adjustable flow control
• Mild steel or abrasion resistant pumps available
• Emergency stop palm button
• Three position pump mode selector
• Three position dispense selector
• Foot switch activation
TECHNICAL SPECIFICATIONS
Fixed
Item Numbers
Utilities
988907
Pneumatic
80 to 110 psi
Electric
Dimensions
Theory of Operation
120 VAC
20.0" H x 15.0" W x 28.0" D
Weight
The Loctite® Meter Mix 2000 Dispense Systems accurately
meter dual liquid and semi - solid materials throughout
a wide range of viscosities and ratios. They contain two high
precision volumetric displacement pump assemblies. Selectable
paired pump diameters determine the ratio for a fixed system.
The variable ratio unit utilizes a pneumatic cylinder to adjust
a lever- beam drive link to automatically change ratio
requirements. Shot size is controlled using a manual vernier
selector switch and 4 - digit reference. Both liquids move
simultaneously through two dispensing hoses, a dispense valve
and mixing chamber / static mixer that provide the effective
mixing of the two components just prior to being applied.
988906
Variable
75 to 100 lbs.
Mix Ratio Range
by Volume
FIXED – 0.51 cc to 25 cc
VARIABLE – 0.51 cc to 21.37 cc
Up to 30 or more per minute, depending on material
viscosity, hose sizes, and mixer type
FIXED – 1:1 to 9.76:1
VARIABLE – 1:1 to 41.56:1
Used to Dispense
Two-Part Epoxies, Two-Part Acrylics, Two-Part Polyurethanes
Dispense Range/Cycle
Cycle Rate
Package Types
Parts Included
Cans, pails, drums, totes
(1) Loctite® 2000 Meter Mix System – Choice of either
8 mm, 10 mm, 15 mm, 20 mm or 25 mm pump assemblies
(depends on ratio and dispense rate requirements)*
(1) Night Cap
(1) Ratio Cap
(10) Static Mixers
**Feed system options and accessories are sold separately
and can be found on page 39-40.
*See pages 41-42 to determine pump diameters
required for your application.
Additional Information
Additional Accessories Sold Separately**
• Material reservoirs
• Lock down lid with agitator
• Hoses – various sizes
and lengths
36
• Dispense valves
• Reservoir heaters
• Abrasive resistant
wetted components
• Follower plates
• Desiccant dryers
• Mounted trigger assembly
for dispense valve
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Item Numbers: 988908 and 988909
The Loctite® Meter Mix 3000 Dispense Systems are versatile
dispensing systems for two - part adhesive chemistries and
incorporate a variety of feed system options. Available in fixed
or variable ratio, the systems offer programmable shot size
and integrated PLC controls with convenient touch screen
capability. These units come standard with mild steel pump
components with optional abrasion resistant or 304 stainless
steel. See technical specifications for shot size and mix ratio
ranges for both units.
Features:
•
•
•
•
•
•
•
•
•
•
•
Fixed and variable mix ratio capability
Programmable shot size selection from touch screen
Ratio check valves
Adjustable flow control
Mild steel or abrasion resistant pumps available
4. 5" W x 3.4" H monochrome touch screen and PLC
Cycle totalizer
Maintenance totalizer
Automatic purge controller
Emergency stop palm button
Foot switch activation
Theory of Operation
The Loctite® Meter Mix 3000 Dispense Systems accurately
meter dual liquid and semi - solid materials throughout
a wide range of viscosities and ratios. They contain two
high precision volumetric displacement pump assemblies.
Selectable paired pump diameters determine the ratio for
a fixed system. The variable ratio unit utilizes a pneumatic
cylinder to adjust a lever- beam drive link to automatically
change ratio requirements. Shot size is controlled using
a PLC interface for stroke adjustment. Both liquids move
simultaneously through two dispensing hoses and a dispense
valve and mixing chamber / static mixer that provide the
effective mixing of the two components just prior to
being applied.
TECHNICAL SPECIFICATIONS
Fixed
Item Numbers
Utilities
988908
Variable
988909
Pneumatic
80 to 115 psi
Electric
Dimensions
120 VAC
20.0" H x 15.0" W x 28.0" D
Weight
75 to 100 lbs.
Mix Ratio Range
by Volume
FIXED – 0.51 cc to 25 cc
VARIABLE – 0.51 cc to 21.37 cc
Up to 30 or more per minute, depending on material
viscosity, hose sizes, and mixer type
FIXED – 1:1 to 9.76:1
VARIABLE – 1:1 to 41.56:1
Used to Dispense
Two-Part Epoxies, Two-Part Acrylics, Two-Part Polyurethanes
Dispense Range/Cycle
Cycle Rate
Package Types
Cans, pails, drums, totes
Parts Included
(1) Loctite® 3000 Meter Mix System – Choice of either
8 mm, 10 mm, 15 mm, 20 mm or 25 mm pump assemblies
(depends on ratio and dispense rate requirements)*
(1) Night Cap
Additional Information
(1) Ratio Cap
(10) Static Mixers
**Feed system options and accessories are sold separately
and can be found on pages 39-40.
*See pages 41-42 to determine pump diameters
required for your application.
Additional Accessories Sold Separately**
• Material reservoirs
• Lock down lid with agitator
• Hoses – various sizes
and lengths
For additional information and the full line of equipment, visit www.equipment.loctite.com.
• Dispense valves
• Reservoir heaters
• Abrasive resistant
wetted components
• Follower plates
• Desiccant dryers
• Mounted trigger assembly
for dispense valve
37
Two-Part Volumetric
Dispensing
Meter Mix Systems
LOCTITE® METER MIX 3000 DISPENSE SYSTEM – PROGRAMMABLE SHOT SIZE
DISPENSING
Adhesive Feed Options
Meter Mix Systems
Two-Part Volumetric
Dispensing
Loctite® DuraPump™ Selector Guide
Gravity Tanks
Pressure Reservoirs
Pail Pumps
(< 7,000 cps)
(7,000 to 70,000 cps)
( > 70,000 cps)
PE Tank
316SS Tank
Loctite® DuraPump™ Meter Mix System 1
Dispense Valve
Mix Nozzle Manifold – Direct Mix
Nozzle Attachment
Hose Options
General Purpose
Various Lengths
and Diameters
MMA
Pistol Grip Option
1 See page 39 for Loctite® DuraPump™
Feed and Dispensing Options
Loctite® Meter Mix 1000, 2000 and 3000 Dispense Systems
Accessory- Option Selector Guide
Dispense
MMD Dispense Valve 1
Hose Configuration 2
Valve Control Options
Stainless Steel 1:1
Hand Held Valve
Length
Stainless Steel 10:1
Lever Actuated Valve
Diameter
Abrasion Resistant 1:1
Foot Pedal Actuated
Abrasion Resistant 10:1
Pumps
Pump Seals 3
Pump Construction Material 4
Pump Sizes
Viton
EP
Mild Steel
Stainless Steel
Abrasion Resistant
Sized for Dispense Volume
System Options
Agitation 5
Heat
Precision Flow
Control Drive
Vacuum
System PLC Backup
Level Sensing
Feed Package
Gravity Feed
Pressure Feed 6
Reservoir Materials
Reservoir Size
Mild Steel
5 or 7.5 L
Stainless Steel
5 Gallon
Polyethylene
55 Gallon
1 Stainless steel is the standard material. Abrasion resistant should be used when abrasive fillers are present.
Mix ratios from 1:1 to 5:1 require the 1:1 valve, mix ratios > 5:1 require the 10:1 valve.
2 Viscosity and mix ratio are dependent. High mix ratios and viscosities = larger diameters, Low mix ratios and viscosities = smaller diameters.
3 Viton for epoxy resin, urethane resin and hardener, and silicone resin and hardener. EP for epoxy hardener and MMA resin and hardener.
4 Mild steel is standard. Stainless should be used for materials that are incompatible with mild steel. Abrasion resistant should be used when abrasive fillers are present.
5 Required for highly filled materials. Mixing suspends the filler in the fluid.
6 Require the use of an accumulator. Can be used for drums, pails, or reservoirs.
38
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Loctite® Brand Meter Mix System Options and Accessories
All items sold separately, except where noted.
Loctite® DuraPump™ Models
Description
1051662
1051661
Dispense Valve – General Purpose (All ratios)
Dispense Valve – MMA (All Ratios)
Pistol Grip with Pneumatic Trigger
(Converts Dispense Valve into a Hand-held Tool)
DURAPUMP HOSE KIT – 2 required for each dispense valve
™
1051692
Hose for Dispense Valve –
3⁄ 8" x 24" General Purpose
1051691
Hose for Dispense Valve –
3⁄ 8" x 96" General Purpose
1051693
Hose for Dispense Valve –
3⁄ 8" x 144" General Purpose
1051670
1051669
1051694
1051668
1051667
1051666
Hose for Dispense Valve – 3⁄ 8" x 24" MMA
Hose for Dispense Valve – 3⁄ 8" x 96" MMA
Hose for Dispense Valve – 3⁄ 8" x 144" MMA
™
DuraPump Heated Hose Option – 48"
DuraPump™ Heated Hose Option – 96"
™
DuraPump Heated Hose Option – 144"
™
Dispense Valve – 1:1 Nose, Abrasion Resistant
989027
Dispense Valve – 1:1 Nose, Stainless Steel
989098
Dispense Valve – 10:1 Nose, Stainless Steel
989099
Dispense Valve – 10:1 Nose, Abrasion Resistant
989353
Pistol Grip, Electric Switch Option, (MMD 2000, 3000)
989354
Lever Actuated, 1⁄4" Pneumatic Switch Option
989355
Lever Actuated, 3⁄8" Pneumatic Switch Option
989356
Lever Actuated, 3⁄8" Electric Switch Option
989415
Valve Mounting Boom – 5 or 7 L Tanks
989416
Valve Mounting Boom – 5 gallon Tanks
989195
MMD Hose – 3⁄16" x 24", Stainless Steel Fittings
989198
MMD Hose – 3⁄16" x 72", Stainless Steel Fittings
989201
MMD Hose – 3⁄16" x 120", Stainless Steel Fittings
989202
MMD Hose – 1⁄4" x 24", Mild Steel Fittings
989203
MMD Hose – 1⁄4" x 72", Mild Steel Fittings
989204
MMD Hose – 1⁄4" x 120", Mild Steel Fittings
989205
MMD Hose – 1⁄4" x 24", Stainless Steel Fittings
989206
MMD Hose – 1⁄4" x 72", Stainless Steel Fittings
989207
MMD Hose – 1⁄4" x 120", Stainless Steel Fittings
989208
MMD Hose – 3⁄8" x 24", Mild Steel Fittings
989209
MMD Hose – 3⁄8" x 72", Mild Steel Fittings
989210
MMD Hose – 3⁄8" x 120", Mild Steel Fittings
989211
MMD Hose – 3⁄8" x 24", Stainless Steel Fittings
989212
MMD Hose – 3⁄8" x 72", Stainless Steel Fittings
989213
MMD Hose – 3⁄8" x 120", Stainless Steel Fittings
MMD Hose – 1⁄2" x 24", Mild Steel Fittings
1051660
9.5 L Poly Gravity Tank with Cover
(Requires 1051651)
989215
MMD Hose – 1⁄2" x 72", Mild Steel Fittings
7 L Stainless Steel Gravity Tank with Cover
(Requires 1051651)
989216
MMD Hose – 1⁄2" x 120", Mild Steel Fittings
1051659
989217
MMD Hose – 1⁄2" x 24", Stainless Steel Fittings
Dual Tank Stand
(1 Required for each pair pf Gravity Tanks)
989218
MMD Hose – 1⁄2" x 72", Stainless Steel Fittings
989219
MMD Hose – 1⁄2" x 120", Stainless Steel Fittings
STAINLESS STEEL – 5 and 7.5 Liter Stainless Steel Reservoir Options
1051657
Disposable Desiccant Air Dryer Option
988988
5 L Stainless Steel Tank with Cover
1051656
Follower Plate with Handle
(For Stainless Steel Tank Only)
988989
7.5 L Stainless Steel Tank with Cover
988991
7.5 L Tank High-Low & Vac. Ready – Mild Steel (MMD 3000)
1051655
Agitator Assembly
(For Stainless Steel Tank Only)
988993
7.5 L Tank High-Low & Vac. Ready – SS (MMD 3000)
988994
Recirculation for 5 or 7.5 L Tanks
1051654
Tank Heater and Controls Option
(For Stainless Steel Tank Only)
989012
Disposable Desiccant Air Dryer and Lock Down Lid
989013
Follower Plate with Handle
Low Level Sensing Option – Stainless Steel Tank
(Programmable DuraPump™ Only)
989015
Electric Agitator Assembly with Cover
989023
Heat Blanket (720 W) and Insulation for 5 or 7.5 L Tank
Low Level Sensing Option – Poly Tank
(Programmable DuraPump™ Only)
989024
Hose Heater (50 W) and Insulation for 1⁄2" or 3⁄8" x 2' long
989030
Low Level Sensor for one 7.5 L Tank
989037
7.5 L Tank, High-Low Sensor Ready (MMD 3000 only)
989230
High and Low Level Sensor for one 5 or 7.5 L Tank
989231
High and Low Level Sensors with Auto Refill
989232
Disposable Desiccant Air Dryer
989276
5 or 7.5 L Tank – Vacuum Ready, Mild Steel
1051630
1051629
DURAPUMP CONTROL OPTIONS
™
1051695
Pistol Grip, Pneumatic Switch Option, (MMD 1000)
989026
989214
1051651
1051627
989025
HOSES – All Braided Stainless Steel
DURAPUMP ™ RESERVOIR OPTIONS
SHOWN:
2 Poly Tanks
mounted on
1 Dual Tank Stand
Description
VALVE MOUNTING BOOMS
All Loctite DuraPump hose kits come complete with 2 fittings
for connection to the DuraPump™ System and Dispense Valve.
®
Item
Number
DISPENSE VALVES
DURAPUMP ™ DISPENSE VALVES – Optional
1051664
PRODUCT
Meter Mix Systems
Item
Number
Hose Heat Controller – For 1 or 2 Heated Hoses
Precision Hydraulic Flow Controller
For additional information and the full line of equipment, visit www.equipment.loctite.com.
39
Two-Part Volumetric
Dispensing
PRODUCT
MMD 1000, 2000 and 3000 Models
DISPENSING
All items sold separately, except where noted.
PRODUCT
Meter Mix Systems
Two-Part Volumetric
Dispensing
Loctite® Brand Meter Mix Feed System Options and Accessories for
Meter Mix 1000, 2000 and 3000 Dispense Systems Only
Item
Number
PRODUCT
Description
ACCUMULATOR FEED OPTIONS - (Accumulator Replaces the Tank on that Side)
989016
989017
989233
989234
Item
Number
Description
988912
Abrasion Resistant Pumps instead of
Mild Steel
988913
304 Stainless Steel Pumps instead of
Mild Steel
989029
3-way Stainless Steel Ratio
Check Valve Upgrade
PUMP MATERIAL OPTIONS
Aluminum Accumulator; High-Low
Electric Controls
Stainless Steel Accumulator;
High-Low Electric Controls
Aluminum Accumulator;
High-Low Pneumatic Controls
Stainless Steel Accumulator;
High-Low Pneumatic Controls
RATIO CHECK VALVES
5 GALLON TANK FEED OPTIONS
988995
6.9 CFM Vacuum Pump Assembly
988997
Pressure - Vacuum Tank – Mild Steel
988998
Electric Agitator – 1 Tank
988999
Tank Support Stand – Holds 2 Tanks
989000
Disposable Desiccant Dryer – 5 gallon
988924
8 mm High, 8 mm Low
989001
Nitrogen Harness Assembly – 1 Tank
988925
8 mm High, 10 mm Low
989002
Nitrogen Harness Assembly – 2 Tanks
988926
8 mm High, 15 mm Low
989003
Polyethylene Tank Assembly
988927
8 mm High, 20 mm Low
989004
Polyethylene Follower Plate
988928
8 mm High, 25 mm Low
989005
Tank Air Pressure Assembly
988931
10 mm High, 8 mm Low
989006
Low Level Control Sensor (MMD 3000 only)
988932
10 mm High, 10 mm Low
989007
High & Low Level Control Sensors
(MMD 3000 only)
988933
10 mm High, 15 mm Low
988934
10 mm High, 20 mm Low
988935
10 mm High, 25 mm Low
988938
15 mm High, 8 mm Low
988939
15 mm High, 10 mm Low
988940
15 mm High, 15 mm Low
988941
15 mm High, 20 mm Low
988942
15 mm High, 25 mm Low
PUMP PAIR CONFIGURATIONS – All Mild Steel (Standard sizes included in system pricing)
989008
Pressure - Vacuum Tank – Stainless Steel
989011
Pump Inlet Adapter Fitting
989031
Vacuum Valving Assembly – 1.0", Mild Steel
989033
Vacuum Valving Assembly – 1.0", Stainless Steel
989277
Heat Blanket Insulation – 1750 watts
ELECTRICAL HEAT CONTROLS
989019
Electrical Enclosure and Controls for 1 Heat Load
988945
20 mm High, 8 mm Low
989020
Electrical Enclosure and Controls for
2 Heat Loads
988946
20 mm High, 10 mm Low
988947
20 mm High, 15 mm Low
989021
Electrical Enclosure and Controls for
3 Heat Loads
988948
20 mm High, 20 mm Low
Electrical Enclosure and Controls for
4 Heat Loads
988949
20 mm High, 25 mm Low
988952
25 mm High, 8 mm Low
988953
25 mm High, 10 mm Low
Precision Flow Control Drive – (MMD 3000 only)
988954
25 mm High, 15 mm Low
989274
PLC Program Backup/Upgrade –
(MMD 3000 only)
988955
25 mm High, 20 mm Low
988956
25 mm High, 25 mm Low
989661
PLC Interface Cable – (MMD 3000 only)
988980
8 mm High, Custom Diameter Low
988996
Remote Operator Controls
988981
10 mm High, Custom Diameter Low
988982
15 mm High, Custom Diameter Low
989022
SYSTEM CONTROL OPTIONS
989018
SHIPPING CRATES
40
989035
Shipping Crate – 5 and 7.5 L Systems
988983
20 mm High, Custom Diameter Low
989235
Shipping Crate – 5 gallon Tank Systems
988984
25 mm High, Custom Diameter Low
988985
30 mm High, Custom Diameter Low
988986
35 mm High, Custom Diameter Low
988973
Custom Diameter High, 8 mm Low
988974
Custom Diameter High, 10 mm Low
988975
Custom Diameter High, 15 mm Low
988976
Custom Diameter High, 20 mm Low
988977
Custom Diameter High, 25 mm Low
988978
Custom Diameter High, 30 mm Low
988979
Custom Diameter High, 35 mm Low
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Meter Mix Dispensing Systems
Pump Selector Guides
CHART 1 - Fixed Ratio Pump Diameter Configuration and Corresponding Mix Ratio
HIGH VOLUME PUMP (mm)
8.000
9.500
10.000
11.000
12.000
13.000
14.000
15.000
20.000
25.000
LOW VOLUME PUMP (mm)
Output CCs
1.277
1.800
1.995
2.414
2.873
3.371
3.910
4.489
7.980
12.468
8.000
1.277
1.00
1.41
1.56
1.89
2.25
2.64
3.06
3.52
6.25
9.77
9.500
1.800
1.00
1.11
1.34
1.60
1.87
2.17
2.49
4.43
6.93
10.000
1.995
1.00
1.21
1.44
1.69
1.96
2.25
4.00
6.25
11.000
2.414
1.00
1.19
1.40
1.62
1.86
3.31
5.17
12.000
2.873
1.00
1.17
1.36
1.56
2.78
4.34
13.000
3.371
1.00
1.16
1.33
2.37
3.70
14.000
3.910
1.00
1.15
2.04
3.19
15.000
4.489
1.00
1.78
2.78
20.000
7.980
1.00
1.56
25.000
12.468
1.00
Pump sizes = WHITE; Maximum output per single pump = BLUE; Volumetric mix ratio (high volume component/low volume component) = BLACK
SELECTION PROCESS
1. Determine the adhesive shot volume required per part in cubic centimeters (cc’s; same as ml’s), from production requirements.
2. From adhesive technical data sheet, determine the adhesive volumetric mix ratio
(high volume component/low volume component).
3. Review the blue maximum outputs for a volume which is 50% to 90% of the maximum output volume of the combined pump
size configuration. Be sure to combine a high volume and low volume pump for the corresponding maximum output volume of
the combined pumps, see example 1.
a. If the adhesive shot volume required is greater than that of the maximum possible output of the configurations, divide the required shot
volume by the smallest number which makes the required shot volume less than the maximum possible output for that configuration.
Then repeat step 4. The divisor is the number of cycles the machine must perform to meet the required shot volume, see example 2.
b. Compare the maximum output volume of the combined pump configuration to the white mix ratio for that combination of pump
sizes. If the corresponding mix ratio does not exactly match that of the adhesive, review the chart for other alternatives, or specify
one pump from the chart, along with a Custom pump size, which will yield the exact pump configuration required for the adhesives
mix ratio, see example 2 and see custom pump volume calculation example below**.
EXAMPLE #1 FIXED RATIO –
STANDARD PUMP SIZES APPLY
High volume = 1
Low volume = 1
Mix ratio = 1/1 = 1
Per part shot size = 6 cc (6 ml)
High volume pump = 15 mm
Low volume pump = 15 mm
Volumetric mix ratio = 1/1
Maximum pump combination output = 8.978 cc
(6 cc / 8.978 cc) x 100% = 67% - ‡ o.k.
Recommended pump configuration = 15 mm/15 mm
15 mm pumps are standard sizes; therefore no custom pump fee is required.
** CUSTOM PUMP VOLUME CALCULATION – π x (Cylinder Radius)2
EXAMPLE #2 FIXED RATIO –
1 CUSTOM PUMP SIZE AND 2 CYCLES REQUIRED FOR REQUIRED SHOT SIZE
High volume = 2
Low volume = 1
Mix ratio = 2/1 = 2
Per part shot size = 22.5 cc (22.5 ml)
Maximum output volume of 2:1 combination ~ 18.7 cc with a
25 mm/17.675 mm pump configuration
Per part shot size divided by 2 = 11.25 cc (11.25 ml)
High volume pump = 25 mm Low volume pump = 17.675 mm
Volumetric mix ratio = 2/1
Maximum pump combination output = 18.7 cc
(11.25 cc/18.7 cc) x 100% = 60% - ‡ o.k.
Two (2) shots per part are needed to obtain 22.5 cc per part shot size requirement.
Recommended pump configuration = 25 mm / 17.675 mm
25 mm pump is standard; 17.675 mm pump is special.
One custom pump sizing fee applies.
TO CALCULATE PUMP VOLUMES FOR CUSTOM PUMP SIZES – USE THE FOLLOWING EXAMPLE (Note: All pump lengths are 2.54 cm)
Volume of cylinder = (π x (Cylinder Radius) 2 x Cylinder Length) *(NOTE: Need to convert pump diameter to radius and pump size from mm to cm)
*For a 16 mm diameter cylinder: Cylinder Radius = 16 mm /2 = 8 mm or 0.80 cm; Cylinder Length = 2.54 cm; π = 3.14159
Volume of 16 mm Pump = (3.14159) x (0.80 cm) 2 x 2.54 cm = 5.107 cc
For additional information and the full line of equipment, visit www.equipment.loctite.com.
41
Two-Part Volumetric
Dispensing
All Loctite® brand MMD machines include two (2) standard pump sizes: 8, 10, 15, 20 and 25 mm.
Meter Mix Systems
Fixed Ratio Systems for Meter Mix 1000, 2000 and 3000 Dispense Systems
DISPENSING
Variable Ratio Systems for Meter Mix 1000, 2000 and 3000 Dispense Systems
Variable ratio machines are capable of changing the mix ratio within the pump configurations capabilities. To specify a VARIABLE RATIO
pump configuration, use chart 2. Variable ratio units have the same standard pump sizes; 8, 10, 15, 20 and 25 mm.
HIGH VOLUME PUMP (mm) 8.000
Meter Mix Systems
Two-Part Volumetric
Dispensing
CHART 2 - Variable Ratio Pump Diameter Configuration and Corresponding Mix Ratio
9.500
10.000
11.000
12.000
13.000
14.000
15.000
20.000
25.000
30.000
35.000
LOW VOLUME PUMP (mm)
Output CCs
1.277
1.800
1.995
2.414
2.873
3.371
3.910
4.489
7.980
12.468
17.954
24.438
8.000 @ MAX
0.906
1.41
1.99
2.20
2.66
3.17
3.72
4.31
4.95
8.80
13.75
19.81
26.96
8.000 @ MIN
0.300
4.26
6.00
6.65
8.05
9.57
11.24
13.03
14.96
26.60
41.56
59.84
81.45
9.500 @ MAX
1.278
1.00
1.41
1.56
1.89
2.25
2.64
3.06
3.51
6.24
9.75
14.05
19.12
9.500 @ MIN
0.423
3.02
4.26
4.72
5.71
6.79
7.97
9.24
10.61
18.86
29.47
42.44
57.76
10.000 @ MAX
1.416
0.90
1.27
1.41
1.70
2.03
2.38
2.76
3.17
5.63
8.80
12.68
17.25
10.000 @ MIN
0.469
2.72
3.84
4.26
5.15
6.13
7.19
8.34
9.57
17.02
26.60
38.30
52.13
11.000 @ MAX
1.714
0.74
1.05
1.16
1.41
1.68
1.97
2.28
2.62
4.66
7.28
10.48
14.26
11.000 @ MIN
0.567
2.25
3.17
3.52
4.26
5.06
5.94
6.89
7.91
14.07
21.98
31.65
43.08
12.000 @ MAX
2.040
0.63
0.88
0.98
1.18
1.41
1.65
1.92
2.20
3.91
6.11
8.80
11.98
12.000 @ MIN
0.675
1.89
2.67
2.96
3.58
4.26
4.99
5.79
6.65
11.82
18.47
26.60
36.20
13.000 @ MAX
2.394
0.53
0.75
0.83
1.01
1.20
1.41
1.63
1.88
3.33
5.21
7.50
10.21
13.000 @ MIN
0.792
1.61
2.27
2.52
3.05
3.63
4.26
4.94
5.67
10.07
15.74
22.66
30.84
14.000 @ MAX
2.776
0.46
0.65
0.72
0.87
1.03
1.21
1.41
1.62
2.87
4.49
6.47
8.80
14.000 @ MIN
0.919
1.39
1.96
2.17
2.63
3.13
3.67
4.26
4.88
8.68
13.57
19.54
26.60
15.000 @ MAX
3.187
0.40
0.56
0.63
0.76
0.90
1.06
1.23
1.41
2.50
3.91
5.63
7.67
15.000 @ MIN
1.055
1.21
1.71
1.89
2.29
2.72
3.20
3.71
4.26
7.57
11.82
17.02
23.17
20.000 @ MAX
5.666
0.23
0.32
0.35
0.43
0.51
0.60
0.69
0.79
1.41
2.20
3.17
4.31
20.000 @ MIN
1.875
0.68
0.96
1.06
1.29
1.53
1.80
2.09
2.39
4.26
6.65
9.57
13.03
25.000 @ MAX
8.852
0.14
0.20
0.23
0.27
0.32
0.38
0.44
0.51
0.90
1.41
2.03
2.76
25.000 @ MIN
2.930
0.44
0.61
0.68
0.82
0.98
1.15
1.33
1.53
2.72
4.26
6.13
8.34
30.000 @ MAX
12.747
0.10
0.14
0.16
0.19
0.23
0.26
0.31
0.35
0.63
0.98
1.41
1.92
30.000 @ MIN
4.219
0.30
0.43
0.47
0.57
0.68
0.80
0.93
1.06
1.89
2.96
4.26
5.79
35.000 @ MAX
17.351
0.07
0.10
0.11
0.14
0.17
0.19
0.23
0.26
0.46
0.72
1.03
1.41
35.000 @ MIN
5.743
0.22
0.31
0.35
0.42
0.50
0.59
0.68
0.78
1.39
2.17
3.13
4.26
SELECTION PROCESS
1. Determine the adhesive shot volume required per part, in cubic centimeters (cc’s; same as ml’s), from production requirements.
2. From adhesive technical data sheet, determine the adhesive volumetric mix ratio
(high volume component/low volume component).
3. Review the pump pair combination and corresponding blue maximum and minimum output and ratio range requirements within the
white or gray grids and choose a configuration using the following parameters See examples 3 and 4.
a. The required shot must be > 15% of the minimum output (cc’s) of the combined pump pair configuration. The minimum
pump configuration output is equal to the High Side Pump + minimum output for the Low Side Pump.
b. The required shot should be < 85% of the of the maximum output (cc’s) of the pump pair configuration. The maximum
pump configuration output is equal to the (High Side pump CC maximum + maximum Low Side Pump).
4. As with fixed ratio, if required volumes are exceeded or mix ratios are not exact, repeat steps 3a or 3b in the
fixed ratio selection process.
EXAMPLE #3 VARIABLE RATIO – EPOXY PRODUCT A
High volume = 2
Mix ratio = 2/1 = 2
42
EXAMPLE #4 VARIABLE RATIO – EPOXY PRODUCT B
Low volume = 1
Per part shot size = 2.5 cc (2.5 ml)
High volume = 4
Mix ratio = 4/1 = 4
Low volume = 1
Per part shot size = 5.0 cc (5.0 ml)
High volume pump = 15 mm
Low volume pump = 13 mm
15% min pump combination output = 0.7921 cc (0.15 x 4.489 cc + 0.7921 cc)
85% max pump combination output = 5.850 cc (4.489 cc + 2.394 cc) x 0.85)
Mix ratio range = 1.88:1 – 5.67:1 - pass
Shot size of 2.5 cc within 15% rule
High volume pump = 15 mm
Low volume pump = 13 mm
15% min pump combination output = 0.7921 cc (0.15 x 4.489 cc + 0.7921 cc)
85% max pump combination output = 5.850 cc (4.489 cc + 2.394 cc) x 0.85)
Mix ratio range = 1.88:1 – 5.67:1 - pass
Shot size of 2.5 cc within 15% rule
Recommended configuration = 15 mm /13 mm
15 mm pump is standard; 13 mm pump is special. One special pump-sizing fee applies.
Recommended configuration = 15 mm/13 mm
15 mm pump is standard; 13 mm pump is special. One special pump-sizing fee applies.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Hand Held Hot Melt Applicators
Hand Held Hot
Melt Applicators
Loctite® Hysol™ hand held hot melt applicators are state - of - the - art dispensing units
designed for the application of hot melt adhesives. These units combine ergonomics, user friendly design, and reliability. Selection of a Loctite® Hysol™ hot melt applicator should be
based on the type of hot melt being used, stick diameter, and process requirements.
PRODUCT
1⁄ 2
Item
Number
Stick
Diameter
Dispense
Melt Rate
Dispense
Power
Dispense
Temperature
Hot Melt
Chemistry
195°C
EVA/Polyolefin
3 lbs./hr.
195°C
EVA/Polyolefin
4 lbs./hr.
215°C
Polyamide
INCH SUPERSTICK™ DISPENSERS
NEW
Loctite® Hysol™ 050A
916282
4 lbs./hr.
1
⁄2"
Loctite® Hysol™ 050
98544
Loctite® Hysol™ 050-HT
98545
NEW
Loctite® Hysol™ 050-GAS
3⁄ 4
Manual
916268
1
⁄2"
Superstick™
Sticks
3 lbs./hr.
Manual
195°C
EVA/Polyolefin
916281
1
⁄2"
Superstick™
Sticks
1.5 lb./hr.
Manual
204°C
EVA/Polyolefin
182°C
EVA
121°C
CoolMelt™
NEW
Loctite® Hysol™ 050-LITE
Superstick™
Sticks
INCH MAXISTICK™ DISPENSERS
Loctite® Hysol™ 075
Loctite® Hysol™ 075-LT
98033
98034
3
⁄4"
Maxistick™
Sticks
9 lb./hr.
Manual
5 lb./hr.
1 3⁄ 4 INCH SPRAYPAC ® AND POLYSHOT™ DISPENSERS
Loctite® Hysol™ 175-AIR
98036
Loctite® Hysol™ 175-AIR-HT
98040
Loctite® Hysol™ 175-SPRAY
98037
195°C
13⁄4"
Polyshot™
Sticks
8 lbs./hr.
13⁄4"
SprayPac®
Sticks
8 lbs./hr.
Electric
EVA/Polyolefin
215°C
195°C
Electric
Polyamide
Loctite® Hysol™ 175-SPRAY-HT
98041
Loctite® Hysol™ 175
98035
13⁄4"
Polyshot™
Sticks
6.6 lbs./hr.
Manual
195°C and
215°C**
EVA/Polyolefin
and Polyamide
98011
N/A
3 lbs./hr.
Air
121°C
Reactive
Urethane
N/A
N/A
N/A
N/A
EVA/Polyamide
215°C
URETHANE DISPENSER
Loctite® Hysol™ Reactive
Urethane Cartridge Dispenser
HOT MELT BENCH MOUNT AND CONTROLLER OPTIONS
Loctite® Hot Melt
Bench Mount Kit
98042
Loctite® Hot Melt
Pneumatic Timer
98043
** The Loctite® Hysol™ 175 Dispenser (manual electric) is supplied with both temperature modules.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
43
DISPENSING
1⁄ 2
I NCH S UPERSTICK ™ D ISPENSERS
LOCTITE® HYSOL™ 050A / 050 / 050-HT
Item Numbers: 916282, 98544 and 98545
Hand Held Hot
Melt Applicators
Loctite® industrial grade 1⁄ 2" stick EVA and polyolefin hot melt applicators are now available in two styles to meet your preferred
grip and comfort. Loctite® Hysol™ 050 and 050A are both lightweight and easy to use. Electrically heated, lightweight and each
with their own ergonomic, easy pull triggers ensure operator comfort for long term high performance and reliability. The Loctite®
Hysol™ 050-HT model is also available for polyamide hot melts.
Features:
• Lightweight, well balanced, and ergonomically designed easy
pull triggers for operator comfort and application control
• Fast heat up time for virtually immediate use
• Completely enclosed heater housing for maximum safety
• Fixed precision thermostat temperature control
for consistent heating
Theory of Operation
TECHNICAL SPECIFICATIONS
PRODUCT
Loctite®
Hysol™ 050A
Item Number
916282
Required
Utilities
Voltage
The dispense rate and timing are manually controlled with the
trigger mechanism.
Items
98544 and 98545
Loctite®
Hysol™ 050-HT
98544
98545
120 VAC; 60 Hz; single phase
Power
250 watts
500 watts
Nominal Stick
Diameter
Size
Loctite®
Hysol™ 050
1⁄2"
2.0" W x 12.0" L x 6.5" H
Weight
™
Superstick
3.25" W x 10.75" L x 7.5" H
1.25 lbs.
1.15 lbs.
Dispense Power
Manual
Power Cord Length
6.0 feet (72")
6.5 feet (78")
Warm-Up Time
3 to 5 minutes
4 to 5 minutes
Dispense Melt Rate
Dispense
Temperature
Hot Melt Chemistry
Parts
Included
4 lbs./hour
3 lbs./hour
4 lbs./hour
193°C
195°C
215°C
EVA and Polyolefin
EVA and Polyolefin
Polyamide hot melts
hot melts
hot melts
™
(1) Hysol 050, 050-HT or 050A Hot Melt Applicator
(1) Manual
(1) Standard Nozzle
(1) Plastic Stand
(1) Wire Hanger
Additional
Information
For Hot Melt Nozzles and Accessories, see page 49.
NEW
NEW
Item 916282
LOCTITE® HYSOL™ 050-GAS
Item Number: 916268
The Loctite® Hysol™ 050 - GAS Hot Melt Applicator is a hand held, cordless system. Commercially available butane gas canisters are
used as the source of energy. The dispense quantity and timing are manually controlled with the ergonomic trigger mechanism.
Features:
• Well balanced and ergonomically designed
for operator comfort and application control
• Low actuation force to reduce finger fatigue
• Regulated temperature control for consistent heating
• Gas powered for portability and versatility
Required Utilities (Fuel)
Nominal Stick Diameter
Size
Theory of Operation
The dispense quantity and
timing are manually controlled
with the trigger mechanism.
TECHNICAL SPECIFICATIONS
Weight
NEW
1⁄2"
Superstick™
2" W x 8" L x 7.5" H
0.7 lbs.
Dispense Power
Manual
Warm-Up Time
4 to 7 minutes
Dispense Melt Rate
Dispense Temperature
Hot Melt Chemistry
Parts Included
Additional Information
44
Braun, Calibri, Ronson, Rowenta, or other
high quality cigarette lighter fluids
up to 3 lbs./hour
195°C
EVA and Polyolefin hot melt sticks
(1) Hysol™ 050-GAS Hot Melt Applicator
(1) Standard Nozzle (1) Plastic Stand
(1) Manual
For Hot Melt Nozzles and Accessories, see page 49.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
LOCTITE® HYSOL™ 050-LITE
Item Number: 916281
The Loctite® Hysol™ 050 - LITE Hot Melt Applicator is a hand held, electrically heated dispenser. The dispense quantity and timing
are manually controlled with the ergonomic trigger mechanism. This applicator weighs less than a pound, and is ideal for hobby,
craft and light duty industrial applications.
• Lightweight, well balanced, and ergonomically
designed for operator comfort and application control
• Completely enclosed heater housing for maximum safety
• State - of - the - art, self - regulating heater
for accuracy in temperature control
• Electrically double insulated
for additional safety
TECHNICAL SPECIFICATIONS
Required
Utilities
Voltage
100/240 VAC; 50/60 Hz
Power
400 W heat up, 45 W operating, 20 W rest
1⁄2"
Nominal Stick Diameter
Size
Weight
0.8 lbs.
Dispense Power
Manual
Power Cord Length
The dispense rate and
timing are manually
controlled with the
trigger mechanism.
Maximum Extension Cord
6.5 feet (78")
65 feet
Warm-Up Time
5 to 7 minutes
Dispense Melt Rate
1.5 lbs./hour
Dispense Temperature
204°C
Hot Melt Chemistry
EVA and Polyolefin hot melt sticks
(1) Hysol™ 050-LITE Hot Melt Applicator
(1) Standard Nozzle (1) Wire Stand
Parts Included
Additional Information
3⁄ 4
Superstick™
1.5" W x 8" L x 6.5" H
Theory of Operation
NEW
Hand Held Hot
Melt Applicators
Features:
(1) Manual
For Hot Melt Nozzles and Accessories, see page 49.
I NCH M AXISTICK ™ D ISPENSERS
LOCTITE® HYSOL™ 075 / 075-LT
Item Numbers: 98033 and 98034
The Loctite® Hysol™ 075 and 075 - LT (for CoolMelt™) are industrial grade, hand held, hot melt applicators. Electrically heated, both
units are lightweight and easy to use. The Loctite® Hysol™ 075 features a market leading dispense rate while both units offer extra
large adhesive loading capacity. The dispense quantity and timing are manually controlled with the ergonomic trigger mechanism.
Features:
• Lightweight, well balanced, and ergonomically
designed for operator comfort and application control
• Full-hand trigger for minimized operator fatigue
• Completely enclosed heater housing for maximum safety
• Fast heat up time for virtually immediate use
• Highest output, hand held dispenser in its class
• Fixed precision thermostat temperature control
for consistent heating
• Thermal fuse protection for additional safety
• Multiple stick loading with a detachable
top - mounted speed loader (included)
TECHNICAL SPECIFICATIONS
PRODUCT
Item Numbers
Required
Utilities
Voltage
Loctite® Hysol™ 075
Loctite® Hysol™ 075-LT
98033
98034
120 VAC; 60 Hz; 120V; 3.3 amp single phase
Power
400 watts
3
⁄ 4" Maxistick™
Nominal Stick Diameter
Size
1.94" W x 12.5" L x 8.25" H
Weight
1.9 lbs.
Power Cord Length
6.5 feet (78")
Maximum Extension Cord
Theory of Operation
Warm-Up Time
The dispense rate and timing are
manually controlled with the trigger
mechanism. A high adhesive
dispense rate, a large adhesive
loading capacity and ease
of application are the
trademarks of
this applicator.
Dispense Power
Dispense Melt Rate
Dispense Temperature
65 feet
5 minutes
Manual
9 lbs./hour
9 lbs./hour
182°C
121°C
Applicator Adhesive Capacity
Wire Cross-Section
Hot Melt Chemistry
Parts Included
Additional Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
0.12 lbs.
16 a.w.g. minimum
EVA hot melt sticks
Loctite® Hysol® CoolMelt™
EVA hot melt sticks
(1) Hysol™ 075 or 075-LT Applicator (1) Speed Loader
(1) Plastic Dispenser Stand
(1) Standard Nozzle
(2) Stand-Off Wings
(1) Manual
For Hot Melt Nozzles and Accessories, see page 49.
45
DISPENSING
1 3⁄ 4 I NCH S PRAY PAC ®
AND
P OLYSHOT ™ A PPLICATORS
LOCTITE® HYSOL™ 175-AIR / 175-AIR-HT
PNEUMATIC APPLICATORS
TECHNICAL SPECIFICATIONS
PRODUCT
Loctite® Hysol™ 175-AIR
Loctite® Hysol™ 175-AIR-HT
Item Numbers
98036
98040
Hand Held Hot
Melt Applicators
Item Numbers: 98036 and 98040
The Loctite® Hysol™ 175-AIR and 175-AIR-HT (High Temperature for
Polyamides) are industrial grade, electrically heated, hand held
pneumatic hot melt applicators. These high capacity dispensers are
rugged and designed for heavy duty work. The dispense quantity and
timing are pneumatically controlled with the ergonomic trigger
mechanism, greatly minimizing operator fatigue.
Features:
• Lightweight, well balanced, and ergonomically
designed for operator comfort and application control
• Pneumatically powered actuation to reduce operator fatigue
• High melt rate for maximum output
• Completely enclosed heater housing for maximum safety
• Fixed precision thermostat temperature
control for consistent heating
Voltage
Required
Power
Utilities
Air Input
Nominal Stick Diameter
Size
Weight
Power Cord Length
Maximum Extension Cord
Warm-Up Time
Dispense Power
Dispense Melt Rate
Dispense Temperature
Applicator Adhesive Capacity
Wire Cross-Section
Hot Melt Chemistry
Parts Included
110/120 VAC; 50/60 Hz
500 watts
45 to 100 psi
1 3⁄4" Polyshot™
2.6" W x 12.1" L x 9.5" H
3.89 lbs.
10 feet (120")
65 feet
10 minutes
Electric
8.8 lbs./hour
195°C
215°C
0.125 lbs.
16 a.w.g. minimum
EVA hot melt sticks
Polyamide hot melts sticks
(1) Hysol™ 175-AIR or Hysol ™ 175-AIR-HT Applicator
(1) Plastic Stand
(1) Valve Body Air Line Adapter
(1) Standard Nozzle
(1) Manual
Theory of Operation
The dispense rate is controlled by
the air pressure, and the
timing is controlled by the
trigger mechanism.
Pneumatically powered
dispensing reduces
operator fatigue.
Additional Information
For Hot Melt Nozzles and Accessories, see page 49.
Additional Accessories Sold Separately
98042 –
Loctite® Hot
Melt Bench
Mount Kit
985397 –
Loctite® Air
Line Filter,
Regulator, Gauge
98043 – Loctite® Hot
Melt Pneumatic Timer
LOCTITE® HYSOL™ 175-SPRAY / 175-SPRAY-HT PNEUMATIC APPLICATORS
Item Numbers: 98037 and 98041
The Loctite® Hysol™ 175-SPRAY and 175-SPRAY-HT (High
Temperature for Polyamides) are industrial grade, electrically
heated, hand held, pneumatic hot melt applicators. Fine to coarse
spray pattern control is possible with a simple air rate adjustment
knob. These high capacity dispensers are rugged and designed for
heavy duty work. The dispense quantity and timing are
pneumatically controlled with the ergonomic trigger mechanism,
greatly minimizing operator fatigue.
•
•
•
•
Adjustable flow control for tailoring the spray pattern
Patented spray technology for small or large spray pattern
Automatic end-of-cycle purge to prevent nozzle clogging
Lightweight, well balanced, and ergonomically
designed for operator comfort and application control
Pneumatically powered actuation to reduce operator fatigue
High melt rate for maximum output
Completely enclosed heater housing for maximum safety
Fixed precision thermostat temperature control
for consistent heating
Theory of Operation
By using the air flow control, the spray
pattern can be varied from a narrow to
a wide spiral pattern. The dispense
rate is controlled by the air
pressure, and the timing is
controlled with the trigger
mechanism. Pneumatically
powered dispensing
reduces operator fatigue.
46
PRODUCT
Hysol™ 175-SPRAY
Hysol™ 175-SPRAY-HT
Item Numbers
98037
98041
Voltage
Required
Utilities
110/120 VA; 50/60 Hz
Power
500 watts
Air Input
45 to 100 psi
Ultra-wide spray nozzle: 1.5" minimum / 6" maximum
Spray Pattern
Features:
•
•
•
•
TECHNICAL SPECIFICATIONS
Standard medium spray nozzle: 1.25" minimum / 5" maximum
Narrow spray nozzle: 0.5" minimum / 1.25" maximum
1 3⁄ 4" SprayPac® Sticks
Nominal Stick Diameter
Size
2.6" W x 12.1" L x 9.5" H
Weight
4 lbs.
Power Cord Length
10 feet (120")
Maximum Extension Cord
65 feet
Warm-Up Time
10 minutes
Dispense Power
Electric
Dispense Melt Rate
8 lbs./hour
Dispense Temperature
195°C
Applicator Adhesive Capacity
Wire Cross-Section
215°C
0.125 lbs.
16 a.w.g. minimum
Hot Melt Chemistry
EVA Spray hot melt sticks
Parts Included
(1) Hysol™ 175-SPRAY or Hysol™ 175-SPRAY-HT Applicator
(1) Plastic Stand
(1) Valve Body Air Line Adapter
(1) Manual
(1) Standard Wide Spray Nozzle
Additional Information
Polyamide Spray hot melt sticks
For Hot Melt Nozzles and Accessories, see page 49.
Additional Accessories Sold Separately
985397 – Loctite® Air Line Filter, Regulator, Gauge
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
LOCTITE HYSOL 175 MANUAL APPLICATOR
Heading
– Epoxy & Urethane Adhesives
Item Number: 98035
®
™
The Loctite® Hysol™ 175 is an industrial grade, electrically heated, hand held, manual hot melt applicator. This unit comes with two
plug-in thermostats for either EVA or polyamide adhesives. The dispense quantity and timing are manually controlled with the
ergonomic trigger mechanism.
•
•
•
•
•
designed for operator comfort and application control
Completely enclosed heater housing for maximum safety
Fast heat up time for virtually immediate use
Advanced electronic controller provides power saving mode,
when not in use for long periods of time
Fixed precision thermostat (plug - in module)
for consistent heating
Thermal fuse protection
for additional safety
Hand Held Hot
Melt Applicators
Features:
The complete source on Loctite® brand adhesives,
• Includes two plug - in modules for dispensing both
sealants,
lubricants,
polyamide
and EVA coatings,
hot melts dispensing and curing
equipment
available
only from
Henkel Corporation.
• Lightweight, well balanced,
and ergonomically
TECHNICAL SPECIFICATIONS
Required
Utilities
Voltage
Power
Nominal Stick Diameter
Size
110/120 VAC; 50/60 Hz
400 watts
1.75" Polyshot™ Sticks
2.67" W x 12.25" L x 9.63" H
Weight
2.65 lbs.
Power Cord Length
10 feet (120")
Maximum Extension Cord
Warm-Up Time
65 feet
5 to 7 minutes
Dispense Power
Manual
Dispense Melt Rate
6.6 lbs./hour
Dispense Temperature
195°C or 215°C
Theory of Operation
Applicator Adhesive Capacity
The dispense rate and
timing are manually
controlled with the
trigger mechanism.
Wire Cross-Section
0.125 lbs.
16 a.w.g. minimum
Hot Melt Chemistry
EVA and polyamide hot melt sticks
(1) Hysol™ 175 Applicator
(1) Plastic Stand
(1) Plug-In Module (195°C)
Parts Included
Additional Information
(1) Plug-In Module (215°C)
(1) Standard Nozzle
(1) Manual
For Hot Melt Nozzles and Accessories, see page 49.
U RETHANE D ISPENSER
LOCTITE® HYSOL™ REACTIVE URETHANE CARTRIDGE DISPENSER
Item Number: 98011
The Loctite® Hysol™ Reactive Urethane Cartridge Dispenser is used to dispense reactive polyurethane hot melts from 300 ml
cartridges. This electrically heated, pneumatic dispenser includes a pressure -regulating stand with optional vertical application
stand and foot switch for hands - free application. To minimize
cartridge change - over times, the Loctite® Cartridge Pre - Heater
TECHNICAL SPECIFICATIONS
(item 98012) is recommended.
Voltage
Features:
• Lightweight, well balanced, and ergonomically
designed for operator comfort and application control
• Low actuation force to reduce finger fatigue
• Electronic temperature control
• Rugged molded thermoset plastic housing for
“cool to the touch” operation up to 250°F
• Fixed precision temperature: 250°F (121°C)
• Single cartridge loading
• Direct nozzle cartridge mounting for
quick cartridge changeover
• Various nozzles for different dispense patterns
Theory of Operation
This unit is used in the manual
mode, where the operator
manually begins and
terminates the pneumatic
dispense cycle by a hand
trigger. Flow control is
achieved by adjusting the
regulator supplied on the
base of the unit.
Required
Utilities
120 VAC; 60 Hz; single phase
Power
400 watts
Air Input
80 psi air, filtered to 40 micron
Size
Weight
3.1" W x 12.5" L x 10.3" H
3 lbs.
Adhesive
Dispenses 300 cc aluminum cartridge
Air Output
Maximum 90 psi
Warm-Up Time
7 to 10 minutes
Dispense Power
Dispense Melt Rate
Dispense Temperature
Applicator Adhesive
Capacity
Hot Melt Chemistry
Parts Included
Additional Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Air
3.5 lbs./hour
121°C
0.125 lbs.
Loctite® Hysol® Reactive Urethane hot melts
(1) Hysol™ Reactive Urethane Cartridge Dispenser
(1) Base with Regulator and Gauge (1) Wire Stand
(1) 300 cc Cartridge Adapter
(1) Nozzle with Cap
(1) Heat Resistant Gloves
(1) Cartridge Piercer
(1) Tubing Assembly
(1) Manual
For Hot Melt Nozzles and Accessories, see page 49.
Additional Accessories Sold Separately
98012 – Loctite® Cartridge Pre-Heater
47
DISPENSING
Hand Held Hot
Melt Applicators
H OT M ELT B ENCH M OUNT
AND
C ONTROLLER O PTIONS
LOCTITE® HOT MELT BENCH MOUNT KIT
Item Number: 98042
LOCTITE® HOT MELT PNEUMATIC TIMER
Item Number: 98043
The Loctite® Hot Melt Bench Mount Kit is used for converting the
Loctite® Hysol™ 175-AIR or 175-AIR-HT applicator into a hands-free,
bench- top dispenser. The Loctite® Hot Melt Pneumatic Timer is used in
conjunction with the Loctite® Hot Melt Bench Mount Kit and Loctite®
Hysol™ 175-AIR and 175-AIR-HT applicator for “controlled” dot
dispensing. These units are used for any hot melt application where
holding an applicator is not desirable. This is especially relevant to
applications where the part itself must be moved. Typical applications
include: cardboard boxes and related packaging materials, wood and
plastic panels, furniture components, etc.
98042 – Loctite® Hot Melt
Bench Mount Kit.
Features:
Loctite® Hot Melt Bench Mount Kit
• Ready-made bench-top stand easily attaches to the
Loctite® Hysol™ 175 - AIR or 175 - AIR-HT applicator,
and includes a pneumatic actuator and foot switch
• Included right angle adapter accepts any
Loctite® brand hot melt nozzle
98043 – Loctite® Hot
Melt Pneumatic Timer.
Loctite® Hot Melt Pneumatic Timer
• Directly accepts the Loctite® Hot Melt Bench Mount Kit
• Programmable timer from 0 to 1 second
for controlled dot dispensing
• Internal pneumatic timing device requires
no electrical connection
• Includes a manual mode for set- up and purging
TECHNICAL SPECIFICATIONS
PRODUCT
Loctite® Hot Melt Bench
Mount Kit
Loctite® Hot Melt
Pneumatic Timer
Item Number
98042 *
98043
Theory of Operation
By simply pushing the included foot switch, an operator can
dispense beads or dots of hot melt adhesives onto a part
without the hindrance of holding the applicator. By using
the preset timer, each push of the foot switch will dispense
a single controlled dot of adhesive.
Required Utilities
Size
Weight
Air Input: 60 to 100 psi
7.8" W x 11.9" Depth x 16.4" H
7.4" W x 7.8" L x 2.75" H
5.4 lbs.
2.6 lbs.
Hot Melt Chemistry
Parts Included
Additional Information
EVA/Polyamide
(1) Stand with Pneumatic Actuator
(1) Right Angle Adapter for Nozzle
(1) Foot Switch
(1) Manual
(1) Pneumatic Timer
(1) Manual
For Hot Melt Nozzles and Accessories, see page 49.
* Note: Applicators are sold separately.
48
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Loctite® Brand Hot Melt Nozzles and Accessories
PRODUCT
Item
Number
Description
988107
(Single pack)
985225
(5 pack)
Description
Used With
98030, 98031, 98032,
98035, 98036, 98040
98012
Cartridge Pre-Heater
Holds (2) 300 ml cartridges
98011
984261
Standard Adapter for
300 ml Cartridges
98011
984262
Standard 1-Hole Nozzle
0.098" diameter cone tip, with
integral check valve
(Includes protective cap)
98011
984263
Adapter/Check Valve for
Specialty Nozzles
98011
984264
Needle Jet Nozzle
Tip = 0.051" diameter x 1.26" long
(Requires 984263 adapter)
98011
984265
Diagonal Extension Nozzle
Tip = 0.123" diameter x 1.276" long
(Requires 984263 adapter)
98011
984266
Flat Spreader Nozzle
Tip = (0.084" x .177") sq. x
1.237 long
(Requires 984263 adapter)
98011
984267
2-Hole Nozzle
0.06" diameter x 0.39" spacing
(Requires 984263 adapter)
98011
984268
3-Hole Nozzle
0.06" diameter x 0.20" spacing
(Requires 984263 adapter)
98011
984272
Injection Needle Nozzle with
Integral Check Valve
Tip = 0.059" diameter x
0.197" long
98011
985087
Heavy Duty Metal Stand for Bench
Top or Wall Mounting
985243
Tool Hanger/Balancer –
0 to 1.5 kg
All Hot Melt
Applicators
985397
Air Line Filter, Regulator
Gauge 0 to 150 psi
All Pneumatic
Applicators
Hand Held Hot
Melt Applicators
98687
(5 pack)
988108
(5 pack)
Item
P R O D U C T Number
98544, 98545
Adapter/Check Valves
419115
(Single pack) for Nozzles
ANZ023N01
Used With
916282
Standard Nozzle Adapter with
Check Valve and Jam Nut
98033, 98034
98544, 98545
1-Hole Nozzle
98030,
98031, 98032,
0.08" Diameter Cone Tip (5 pack)
98033, 98034, 98035,
98036, 98040
916050
1-Hole Nozzle 0.09" Diameter
Cone Tip
916282
985110
2-Hole Nozzle
0.06" diameter x 0.39" spacing
98030, 98031,
98032, 98033, 98034,
98035, 98036, 98040,
98544, 98545
985111
3-Hole Nozzle
0.06" diameter x 0.20" spacing
98030, 98031,
98032, 98033, 98034,
98035, 98036, 98040,
98544, 98545
985112
98030, 98031,
Diagonal Extension Nozzle
98032, 98033, 98034,
Tip = 0.14" diameter x 1.23" long 98035, 98036, 98040,
98544, 98545
985113
Needle Extension Nozzle
Tip = 0.05" diameter x
1.32" long
98030, 98031,
98032, 98033, 98034,
98035, 98036, 98040,
98544, 98545
985114
Spreader Extension Nozzle
Tip = (0.09" x 0.25") sq. x
1.32" long
98030, 98031,
98032, 98033, 98034,
98035, 98036, 98040,
98544, 98545
985115
L-Nozzle
0.06" diameter x 0.85" offset
98033, 98034,
98035, 98036, 98040,
98544, 98545
985116
T-Nozzle
0.06" diameter x 1.5" spacing
98033, 98034,
98035, 98036, 98040,
98544, 98545
985122
Standard Medium Spray Nozzle
1.25" to 5" diameter pattern
98037, 98041
985211
Narrow Spray Nozzle
0.05" to 1.25" diameter pattern
98037, 98041
985216
Ultra Wide Spray Nozzle
1.5" to 6.0" diameter pattern
98037, 98041
984999
Standard 1-Hole Nozzle with
Integral Check Valve
Tip = 0.10" diameter x 0.16" long
98029, 916281
985001
Spreader Nozzle with
Integral Check Valve
Tip = (0.08" x 0.25") sq. x
0.47" long
98029, 916281
985002
Pencil Point Nozzle
with Integral Check Valve
Tip = 0.08" diameter x 0.24" long
98029, 916281
985003
Precision Nozzle with
Integral Check Valve
Tip = 0.05" diameter x 0.20" long
98029, 916281
985004
Extension Nozzle with
Integral Check Valve
Tip = 0.10" diameter x 0.50" long
98029, 916281
985005
Silicone Rubber Safety Cap (2 pack)
(for use with 984999, 985002,
985004
98029, 916281
98030, 98031, 98032,
98035, 98036, 98037,
98040, 98041
For custom hot melt dispense nozzles, contact the Special
Equipment Group of Henkel at 1-800-LOCTITE (562 - 8483).
For additional information and the full line of equipment, visit www.equipment.loctite.com.
49
DISPENSING
Bulk Hot Melt Systems
Bulk Hot Melt
Systems
Henkel’s Loctite® Hysol™ bulk hot melt systems offer high performance control and reliability for all of your
hot melt dispensing needs. You can rely on Henkel to supply you with performance hot melt adhesives as well
as an array of standard high volume hot melt dispensing equipment. Henkel offers true one stop shopping for
your complete adhesive solution. These systems are rugged, compact and feature internal system diagnostics
which monitor the temperatures and system settings.
Loctite® Hysol™ bulk hot melt systems accommodate all sizes of Loctite® Hysol® EVA,
polyamide and polyolefin hot melt adhesives and share these performance features:
• All system settings and system diagnostics
are visible on front display for “at a glance”
system status
• PTFE coated reservoir reduces tank residue
• High surface area melt grid is integrated with
tank walls to ensure fast and even heating,
eliminating “hot spots” within the tank
• Gear pump for the most consistent
product delivery pressure
• All systems are CE certified
Bulk Systems
PRODUCT
Item
Number
Maximum
Length of
Hoses
Voltage
Amps
Maximum
Number of
Hoses
Maximum
Dispense
Rate
Maximum
Maximum
Used to
Dispense Tank Setting
Dispense
Temperature Temperature
Loctite® Hysol™ PUR
Hot Melt Dispenser
Loctite® Hysol ™
Bulk-12 System
Loctite® Hysol ™
Bulk-14 System
1012854
24 feet
230 VAC
98131
16 feet
115 VAC
395°F
(202°C)
Reactive
Polyurethane
Hot Melts
from 5
gallon pails
1
195 lbs./hr.
425°F
(218°C)
1
12 lbs./hr.
410°F
(218°C)
395°F
(202°C)
EVA,
Polyamide,
Polyolefin
2
28 lbs./hr.
425°F
(218°C)
395°F
(202°C)
EVA,
Polyamide,
Polyolefin
4
75 lbs./hr.
425°F
(218°C)
395°F
(202°C)
EVA,
Polyamide,
Polyolefin
15
98132
24 feet
230 VAC
13
98133
32 feet
115 VAC
20
98134
48 feet
230 VAC
18
98135
72 feet
230 VAC
28
Loctite® Hysol™
Bulk-34 System
50
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Bulk Hot Melt
Systems
LOCTITE® HYSOL™ PUR HOT MELT DISPENSER
Item Number: 1012854
The Loctite® Hysol™ PUR Hot Melt dispenser is designed to effectively
pump and apply reactive polyurethane hot melt adhesives directly from
5 gallon pails. This dispenser utilizes an innovative inflatable silicone
seal design to insure moisture is kept separated from the reactive PUR
Hot Melt. Product is dispensed using a rugged gear pump design, and
with 3 separate heating zones (platen, hose, and applicator) to insure
long term reliable dispensing.
Features:
• Fully enclosed pail unloading station with a rugged silicone seal
designed to keep moisture out, and an elevator platform to ensure
continuous seal/hot melt contact as the pail is emptied
• 3 zone heating with convenient digital control panel with
component on/off LED displays and digital temperature read - outs
• Inflatable silicone pail seal design ensures reactive moisture
is kept out of a 5 gallon pail during operation
• 3 zone heating controls, pail platen, hose, and applicator
with no check valves to repair or replace
• Can be used on any standard hot melt adhesive
in a 5 gallon pail
Theory of Operation
A 5 gallon pail of PUR Hot Melt is positioned onto the elevator
platform and raised to engage an inflatable silicone seal into
the pail. The platen is heated to the desired temperature and
melts the product which then flows towards the center of the
platen. As the elevator maintains pressure on the pail, the
liquefied product is channeled towards the gear pump around
the bottom center of the platen. Utilizing the control panel,
a temperature range is selected that is within the product’s use
temperature. Once the application temperature is reached, the
equipment is ready to dispense product. When the applicator
trigger is actuated, the gear pump turns on and forces the
product down the heated hose and towards the dispense
applicator. Gear pump speed can also be controlled
to change the application rate.
Utilities
Dimensions
Weight
Dispense Rate
Used to Dispense
Packages Types
Parts Included
Additional Information
46For additional information and the full line of equipment, visit www.equipment.loctite.com.
TECHNICAL SPECIFICATIONS
Electric: 230 VAC; Single Phase, 30 amp maximum
Pneumatic: 65 to 90 psi
52.5" H x 30" W x 22" D
375 lbs.
Up to 195 lbs./hour
Reactive Polyurethane Hot Melts
5 gallon pails
(1) Loctite® PUR Hot Melt 5 Gallon Pail Pump –
Complete System
(1) 8' Heated Hose
See pages 55-57 to select from the wide assortment
of applicators, hoses, nozzles, timers, controllers and
accessories to complete your PUR hot melt dispense system.
51
DISPENSING
Bulk Hot Melt
Systems
LOCTITE® HYSOL™ BULK-12 SYSTEM
Item Numbers: 98131 and 98132
The Loctite® Hysol™ Bulk-12 Hot Melt System is a compact and
efficient bulk hot melt unit capable of manual or automatic
product delivered up to 12 lbs./hr. The unit includes analog
controls with simple modular connections for hoses,
controllers and timers that are sold separately. These CE
certified units have three independent temperature controls
for the tank, hosing and dispense valves that will provide an
effective extrusion or spray application for a wide range
of hot melt adhesives.
Features:
• Adjustable pressure, all electric AC gear pump
• Three controllable temperature zones over six fine
tuned ranges up to 410°F (210°C)
• PTFE coated reservoir with high surface area melt grid
• Internal system diagnostics automatically troubleshoot
electrical connections and eliminate overheating
• Simple analog controls with high visibility
LED indicator lamps for temperature range
and diagnostic status
• Simple modular connections for hoses, controllers,
timers and other optional interfaces
• CE Certified
• Compact footprint
Theory of Operation
This unit is designed to melt and dispense hot melt
adhesive when outfitted with optional hand held or
mountable applicators, for either spray or extrusion
applications. Appropriate dispense controllers, timers,
hosing and nozzle accessories are also selected
based on process needs to complete the system.
TECHNICAL SPECIFICATIONS
Item Number
Voltage
98132
230 VAC
Standard Tank Capacity
Used to Dispense
Maximum Dispense Rate
12 lbs. (5.4 kg)
All forms of Loctite® Hysol® EVA,
Polyamide, Polyolefin
12 lbs./hr. (5.4 kg/hr.)
Maximum Temperature Tank Setting
395°F (202°C)
Maximum Dispense Temperature
410°F (210°C)
Temperature Control Zones
3
Controls
Analog
Maximum Number of Hoses
Maximum Total Length of Hoses
Available Dispense Patterns
1
16 feet
24 feet
Extrude, Swirl Spray, Fan Spray, Cone Spray
Pump Pressure
Dimensions (Lid Open)
Weight (Empty)
52
98131
115 VAC
0 to 300 psi
15.9" L x 10.5" W x 20.0" H
41 lbs. (18.6 kg)
System Power Consumption
1700 watts
2780 watts
Melt Tank Power Consumption
900 watts
1700 watts
Parts Included
(1) Hysol™ Bulk-12 Hot Melt System
(1) Temperature Range Adjustment Tool
(1) 10 mm Hex Key for flow by-pass adjustment
(1) Manual
Additional Information
See pages 55-57 to select from the wide
assortment of applicators, hoses, nozzles,
timers, controllers and accessories to complete
your bulk hot melt dispense system.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Bulk Hot Melt
Systems
LOCTITE® HYSOL™ BULK-14 SYSTEM
Item Numbers: 98133 and 98134
The Loctite® Hysol™ Bulk-14 Hot Melt System is a compact and
efficient bulk hot melt unit capable of manual or automatic
product delivered up to 28 lbs./hr. The unit includes all digital
controls and displays with simple modular connections for
hoses, controllers and timers that are sold separately. These CE
certified units have three independent temperature controls
for the tank, hosing and dispense valves that will provide an
effective extrusion or spray application for a wide range
of hot melt adhesives.
Features:
• Two - channel controls on front panel with full digital
display of set points, temperature ranges, and all
diagnostic functions
• Highly reliable variable speed DC gear pump with
integrated flow control offers consistent product
delivery and extended service life
• Capable of two, independent and
fully customizable dispense lines
• Up to five controllable temperature zones over six
individual ranges for fine tuned temperature control
• User selectable standby mode automatically protects
against overheating product. This extends product life,
lowers energy consumption, and still allows for rapid
restart of the unit
• PTFE coated reservoir with high surface area melt grid
• CE Certified
• Compact footprint
Theory of Operation
This unit is designed to melt and dispense hot melt
adhesive when outfitted with optional hand held or
mountable applicators, for either spray or extrusion
applications. Appropriate dispense controllers, timers,
hosing and nozzle accessories are also selected
based on process needs to complete the system.
TECHNICAL SPECIFICATIONS
Item Number
Voltage
98133
98134
115 VAC
230 VAC
Standard Tank Capacity
14 lbs. (6.4 kg)
Optional Tank Feed Hopper
Used to Dispense
Maximum Dispense Rate
70 lbs. (31.75 kg)
All forms of Loctite® Hysol® EVA,
Polyamide, Polyolefin
28 lbs./hr. (12.7 kg/hr.)
Maximum Temperature Tank Setting
395°F (202°C)
Maximum Dispense Temperature
425°F (218°C)
Temperature Control Zones
5
Controls
Digital
Maximum Number of Hoses
Maximum Total Length of Hoses
Available Dispense Patterns
2
20 feet
48 feet
Extrude, Swirl Spray, Fan Spray, Cone Spray
Pump Pressure
Dimensions (Lid Open)
0 to 300 psi
20.2" L x 11.5" W x 22.5" H
Weight (Empty)
51 lbs. (23.2 kg)
System Power Consumption
2220 watts
3860 watts
Melt Tank Power Consumption
900 watts
1700 watts
Parts Included
Additional Information
For additional information and the full line of equipment, visit www.equipment.loctite.com.
(1) Hysol™ Bulk-14 Hot Melt System
(1) Temperature Range Adjustment Tool
(1) 10 mm Hex Key for flow by-pass adjustment
(1) Manual
See pages 55-57 to select from the wide
assortment of applicators, hoses, nozzles,
timers, controllers and accessories to complete
your bulk hot melt dispense system.
53
DISPENSING
Bulk Hot Melt
Systems
LOCTITE® HYSOL™ BULK-34 SYSTEM
Item Number: 98135
The Loctite® Hysol™ Bulk-34 Hot Melt System is a compact and
efficient bulk hot melt unit capable of manual or automatic
product delivered up to 75 lbs./hr. The unit includes all digital
controls and displays with simple modular connections for
hoses, controllers and timers that are sold separately. These CE
certified units have three independent temperature controls
for the tank, hosing and dispense valves that will provide an
effective extrusion or spray application for a wide range
of hot melt adhesives.
Features:
• Two - channel controls on front panel with
full digital display of set points, temperature ranges
and all diagnostic functions
• Highly reliable variable speed DC gear pump with
integrated flow control offers consistent product
delivery and extended service life
• Capable of up to four, independent and fully
customizable dispense lines
• Up to nine controllable temperature zones over six
individual ranges for fine tuned temperature control
• User selectable standby mode automatically protects
against overheating product. This extends product life,
lowers energy consumption, and still allows for rapid
restart of the unit
• PTFE coated reservoir with high surface area melt grid
• CE Certified
• Compact footprint
Theory of Operation
This unit is designed to melt and dispense hot melt
adhesive when outfitted with optional hand held or
mountable applicators, for either spray or extrusion
applications. Appropriate dispense controllers, timers,
hosing and nozzle accessories are also selected based
on process needs to complete the system.
54
TECHNICAL SPECIFICATIONS
Voltage
Standard Tank Capacity
Optional Tank Feed Hopper
Used to Dispense
Maximum Dispense Rate
230 VAC
34 lbs. (15.4 kg)
100 lbs. (45.4 kg)
All forms of Loctite® Hysol® EVA,
Polyamide, Polyolefin
75 lbs./hr (34.1 kg/hr.)
Maximum Temperature Tank Setting
395°F (202°C)
Maximum Dispense Temperature
425°F (218°C)
Temperature Control Zones
Controls
Maximum Number of Hoses
Maximum Total Length of Hoses
Available Dispense Patterns
Pump Pressure
Dimensions (Lid Open)
Weight (Empty)
System Power Consumption
Melt Tank Power Consumption
9
Digital
4
72 feet
Extrude, Swirl Spray, Fan Spray, Cone Spray
0 to 300 psi
22.0" L x 14.5" W x 27.0" H
86 lbs. (39.0 kg)
6600 watts
3400 watts
Parts Included
(1) Hysol™ Bulk-34 Hot Melt System
(1) Temperature Range Adjustment Tool
(1) 10 mm Hex Key for flow by-pass adjustment
(1) Manual
Additional Information
See pages 55-57 to select from the wide
assortment of applicators, hoses, nozzles,
timers, controllers and accessories to complete
your bulk hot melt dispense system.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Loctite® Hysol™ Bulk Hot Melt System Applicators
In any adhesive application, the accuracy of your dispense equipment can define the level of success of the process.
Henkel offers four accurate and convenient styles of dispense applicators to suit any process requirement. Whichever
dispense applicator you choose, it must match the voltage of the melt unit. The 2 hand and mounted styles also come in
multiple coil voltages (24 VDC, 115 VAC, and 230 VAC) to match external control systems if employed.
Bulk Hot Melt
Systems
1) Loctite ® Hysol ™ Hand Held Applicator
• Convenient, durable, fully insulated, and customizable
• Available in top or bottom inlet applicators
2) Loctite ® Hysol ™ Mounted Applicator (for automatic or fixed position dispense)
• Excellent design for automated applications
• Select electrically controlled mounted applicators for dispensing products up to 5,000 cP
• Select pneumatically controlled mounted applicators for high cycle rates up to 2,400 cpm
• Compact design is easily mounted to a robot or incorporated into a workcell or fixture
3) Loctite ® Hysol ™ 2 Hand Applicator
• Electrically controlled for precision dispense
• Vertical design allows direct positioning over the part
PRODUCT
Loctite® Hysol™
Hand Held Bottom Inlet
Applicator
Loctite® Hysol™
Hand Held Top Inlet
Applicator
Loctite® Hysol™
Mounted Applicator
(Electric – Open/Close)
Item Number
Compatible with
these Melt Units
Melt Unit Voltage
Control Coil
Voltage/Item #
98138
98131, 98133
115 VAC
N/A
98139
98132, 98134, 98135
230 VAC
N/A
98136
98131, 98133
115 VAC
N/A
98137
98132, 98134, 98135
230 VAC
N/A
98146
98131, 98133
115 VAC
24 VDC**
98147
98131, 98133
115 VAC
115 VAC
98145
98132, 98134, 98135
230 VAC
24 VDC**
98149
98132, 98134, 98135
230 VAC
115 VAC
98148
98132, 98134, 98135
230 VAC
230 VAC
24 VDC **/986326 †
989357
®
98131, 98133
115 VAC
™
Loctite Hysol
Mounted Applicator
(Pneumatic – Open/Close)
115 VAC/989358 †
230 VAC/989359 †
24 VDC **/986326 †
986325
98132, 98134, 98135
230 VAC
115 VAC/989358 †
230 VAC/989359 †
Loctite® Hysol™
2 Hand Applicator*
*All of the Loctite ® Hysol ™ 2 Hand Applicators require a separate
applicator control cord and either an extrude or spray control
module. Select between single switch (only requires one
hand to actuate) or two switch (requires two hands to actuate)
to control the unit.
98143
98131, 98133
115 VAC
24 VDC **
98140
98131, 98133
115 VAC
115 VAC
98144
98132, 98134, 98135
230 VAC
24 VDC**
98142
98132, 98134, 98135
230 VAC
115 VAC
98141
98132, 98134, 98135
230 VAC
230 VAC
986884
2 Hand Applicator Cord, 1 Switch
986885
2 Hand Applicator Cord, 2 Switch
** Choose 24 VDC for use with Event Timers.
† Solenoid Valve is required and sold separately.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
55
DISPENSING
Loctite® Brand Extrusion Hoses
Bulk Hot Melt
Systems
Choose between 115 and 230 VAC to match your melt unit, then select the required length of hose.
1
2
4 feet
6 feet
8 feet
10 feet
12 feet
16 feet
18 feet
24 feet
Voltage
986337
986339
986341
986343
9863452
986347 2
986349 1/2
9863511/2
115 VAC
986338
986340
986342
986344
986346
986348
986350
986352
230 VAC
Not available for Loctite® Hysol™ Bulk-12 115 VAC System (98131).
Not available for Loctite® Hysol™ Bulk-14, 115 VAC when using dual hoses.
Loctite® Brand Extrusion Controllers
For 2 Hand Applicator only. This unit allows the integration of the melt tank pump function and 2 Hand Applicator
activation in a single control unit. Choose from 115 and 230 VAC to match your melt unit.
Item Number
Voltage
986886
115 VAC
987525
230 VAC
Loctite® Brand Spray Hoses
Choose between 115 and 230 VAC to match your melt unit, then select the required length of hose.
1
2
4 feet
6 feet
8 feet
10 feet
12 feet
16 feet
18 feet
24 feet
Voltage
986353
986355
986357
986359
986361 2
986363 2
986365 1/2
986367 1/2
115 VAC
986354
986356
986358
986360
986362
986364
986366
986368
230 VAC
Not available for Loctite® Hysol™ Bulk-12 115 VAC System (98131).
Not available for Bulk-14, 115 VAC when using dual hoses.
Loctite® Brand Spray Controllers
Timers
Loctite® Hysol™ Spray Controllers utilize the latest in
microprocessor technology to handle a multitude of
adhesive patterns. A controller and appropriate nozzle are
required for spray or swirl dispensing. See page 57 for a
complete line of bulk hot melt system nozzles and
accessories to meet all your dispensing requirements.
Loctite® Hysol™ Timers provide timed dispense control for
all Loctite® Hysol™ automatic bulk hot melt systems. Timers
can be used in either 115 or 230 VAC systems. The Loctite®
Loctite® Hysol™ Spray Controller
Item Number
Voltage
98161
115 VAC
98162 †
230 VAC
Hysol™ Two and Four Event Timers contain independently
selectable output channels that control 24 VDC or AC line voltage
applicators. They feature separate high and low speed ranges to
control delay and length of pattern. The Four Event Timer has
an added “stitch” mode pattern application. These modular units
can be used with foot switch, proximity or optical sensors.
Loctite® Hysol™ Four Event Timer
Loctite® Hysol™ Two Event Timer
98159
98158
Loctite® Hysol™ 2 Hand Applicator Spray Controller
Item Number
986887
987526 †
†
56
Voltage
Loctite® Brand Timer and External Interface Cords
PRODUCT
115 VAC
230 VAC
If used with Bulk-34 System additional cable, Item Number 1053256 is
also required and sold separately.
Loctite® Hysol™ Loctite® Hysol™ Loctite® Hysol™
Bulk-12 System Bulk-14 System Bulk-34 System
Two or
With 24 VDC Output 1
Four Event
With Line Voltage Output
Timer
986890
9867432
986747 2
986744
986745
986746
External PLC Interface Cords
986891
987835
986892
1
If multiple applicators are required, use either line voltage applicators or
pneumatic applicators only.
2 Can not be used with multiple 24 VDC electric valves (Items 98143, 98144,
98145 or 98146).
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Loctite® Brand Bulk Hot Melt System Nozzles and Accessories
Heading
– Epoxy & Urethane Adhesives
PRODUCT
Item Number
986634
986635
986331
986693
986694
PRODUCT
Item Number
PRODUCT
Item Number
Description
986723
Proximity Sensor Assembly
986724
Optical Sensor Assembly
Bulk-34 Hopper Upgrade to 78 lb. Capacity
986725
Sensor Cord Extension, 10 Feet
Bulk Units Floor Stand
98160
Foot Switch Assembly
984363
Bulk-12 Applicator Hanger Arm Kit
Valve Mount Bracket Kit
984347
Bulk-14 and 34 Applicator Hanger Arm Kit
Feed Line Adapter, 45 Degrees
986637
Hose Cradle
986638
Tension Balancer
986639
Hose Cradle and Tension Balancer
Bulk-14 Hopper Upgrade to 40 lb. Capacity
Feed Line Adapter, 90 Degrees
Description
986369
Extrusion Nozzle 1⁄2" – 0.020" Diameter
986373
Extrusion Nozzle 1⁄2" – 0.030" Diameter
986377
Extrusion Nozzle 1⁄2" – 0.040" Diameter
986381
Extrusion Nozzle 1⁄2" – 0.050" Diameter
986385
Extrusion Nozzle 1⁄2" – 0.060" Diameter
986389
Extrusion Nozzle 1⁄2" – 0.070" Diameter
986393
Extrusion Nozzle 1⁄2" – 0.080" Diameter
986397
Extrusion Nozzle 1⁄2" – 0.090" Diameter
986370
Extrusion Nozzle 1" – 0.020" Diameter
986374
Extrusion Nozzle 1" – 0.030" Diameter
986378
Extrusion Nozzle 1" – 0.040" Diameter
986382
986386
986390
PRODUCT
Item Number
Description
986888
Swirl Nozzle Assembly – without Nozzle
986803
Swirl Nozzle – 0.030" Diameter
986804
Swirl Nozzle – 0.045" Diameter
986805
Swirl Nozzle – 0.060" Diameter
986806
Swirl Nozzle – 0.080" Diameter
986889
Spray Nozzle Assembly with Fan Air Cap –
without nozzle
987017
Spray Nozzle Assembly with Cone Air Cap –
without Nozzle
Extrusion Nozzle 1" – 0.050" Diameter
986807
Spray Nozzle and O-ring – 0.020" Diameter
Extrusion Nozzle 1" – 0.060" Diameter
986808
Spray Nozzle and O-ring – 0.030" Diameter
Extrusion Nozzle 1" – 0.070" Diameter
986809
Spray Nozzle and O-ring – 0.040" Diameter
986394
Extrusion Nozzle 1" – 0.080" Diameter
986810
Spray Nozzle and O-ring – 0.050" Diameter
986398
Extrusion Nozzle 1" – 0.090" Diameter
986791
T-Bar Nozzle – 2" x 1"
986371
Extrusion Nozzle 2" – 0.020" Diameter
986375
Extrusion Nozzle 2" – 0.030" Diameter
986792
T-Bar Nozzle – 2" x 2"
986379
Extrusion Nozzle 2" – 0.040" Diameter
986793
T-Bar Nozzle – 2" x 3"
986383
Extrusion Nozzle 2" – 0.050" Diameter
986387
Extrusion Nozzle 2" – 0.060" Diameter
986797
Y-Bar Nozzle – 2" x 1"
986391
Extrusion Nozzle 2" – 0.070" Diameter
986395
Extrusion Nozzle 2" – 0.080" Diameter
986798
Y-Bar Nozzle – 2" x 2"
986399
Extrusion Nozzle 2" – 0.090" Diameter
986372
Extrusion Nozzle 3" – 0.020" Diameter
986799
Y-Bar Nozzle – 2" x 3"
986376
Extrusion Nozzle 3" – 0.030" Diameter
986783
Direction Nozzle – 0.010" Diameter (2 pack)
986380
Extrusion Nozzle 3" – 0.040" Diameter
986784
Direction Nozzle – 0.020" Diameter (2 pack)
986384
Extrusion Nozzle 3" – 0.050" Diameter
986785
Direction Nozzle – 0.030" Diameter (2 pack)
986388
Extrusion Nozzle 3" – 0.060" Diameter
986786
Direction Nozzle – 0.040" Diameter (2 pack)
986392
Extrusion Nozzle 3" – 0.070" Diameter
986736
Direction Nozzle Assembly – 0.010" Diameter (2 pack)
986396
Extrusion Nozzle 3" – 0.080" Diameter
986738
Direction Nozzle Assembly – 0.020" Diameter (2 pack)
986400
Extrusion Nozzle 3" – 0.090" Diameter
986740
Direction Nozzle Assembly – 0.030" Diameter (2 pack)
986695
Extrusion Button Nozzle – 0.012" Diameter
986742
Direction Nozzle Assembly – 0.040" Diameter (2 pack)
986696
Extrusion Button Nozzle – 0.015" Diameter
986697
Extrusion Button Nozzle – 0.025" Diameter
986730
Direction Nozzle Screw (5 pack)
986698
Extrusion Button Nozzle – 0.030" Diameter
986699
Extrusion Button Nozzle – 0.040" Diameter
986700
Extrusion Button Nozzle – 0.050" Diameter
986727
Direction Nozzle O-Ring (10 pack)
986701
Extrusion Button Nozzle – 0.060" Diameter
986702
Extrusion Button Nozzle – 0.070" Diameter
986703
Extrusion Button Nozzle – 0.080" Diameter
986733
Blank Screw Assembly (5 pack)
986704
Extrusion Button Nozzle – 0.090" Diameter
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Bulk Hot Melt
Systems
986636
Description
57
DISPENSING
Hand Held Valves
Hand Held Valves
Loctite® brand hand held dispensing valves are used where ergonomic design for
hand dispensing of fluids is desired. Designed for use with Loctite® brand controllers
and reservoirs, these hand held valves utilize passive wetted components for universal
compatibility with many fluids. Selection of a Loctite® brand hand held valve is based
on the desired dispensing controls, the dispense principal of the delivery system, and
other process requirements.
PRODUCT
Item
Number
Type
Viscosity
Range
Dispense
Patterns
Used to Dispense
Stroke
Adjustment
Actuation
Pneumatic
Low
Drop,
Dot, Bead
Instant Adhesives,
Retaining
Compounds,
Threadlockers
Yes
Foot
Manual
Low to
Medium
Drop,
Dot, Bead
Instant Adhesives,
Light Cure/Acrylics,
Retaining
Compounds,
Threadlockers
Yes
Finger
Pneumatic
Low to
Medium
Drop,
Dot, Bead
Instant Adhesives,
Light Cure/Acrylics,
Retaining
Compounds,
Threadlockers
Yes
Foot
Pneumatic
Low to
Medium
Drop,
Dot, Bead
Instant Adhesives,
Light Cure/Acrylics,
Retaining
Compounds,
Threadlockers
Yes
Finger
Pinch Tube
Low to
Medium
Drop,
Dot, Bead
Instant Adhesives,
Retaining
Compounds,
Threadlockers
Yes
Finger
LOW VISCOSITY CYANOACRYLATE APPLICATOR
Loctite®
LV Hand Held
Applicator
97130
GENERAL PURPOSE APPLICATORS
Loctite®
Manual
Hand Held
Applicator
Loctite®
Pneumatic
Hand Held
Applicator
Loctite®
Pneumatic
Hand Held
Applicator
97111
97112
97116
PINCH TUBE APPLICATORS
Loctite®
Vari-Drop™
Applicator
58
97131
97132
DISPENSING
Hand Held Valves
Dispenser, Controller and Reservoir are
required with these valves.
L OW V ISCOSITY C YANOACRYLATE A PPLICATOR
LOCTITE® LV HAND HELD APPLICATOR
Item Number: 97130
The Loctite® LV Hand Held Applicator is a pneumatically operated, adjustable
seat valve designed for accurate dispensing of low viscosity adhesives including
cyanoacrylates. The valve body and stem are constructed of PTFE to prevent
premature curing and together with the fine tuning stroke
adjustment, this valve can deliver very small and repeatable
drop sizes shot after shot. This valve must be used in
conjunction with a Loctite® brand controller and product
Type
reservoir, sold separately.
Viscosity Range
Features:
TECHNICAL SPECIFICATIONS
Pneumatic
Low
7" L x 1.6" Maximum Diameter
(170 mm L x 40 mm Maximum Diameter)
Size
• Dispenses low viscosity cyanoacrylates, anaerobic,
and other adhesives under 10,000 cP
• Slim, ergonomic design greatly reduces hand fatigue
• Forward closing to avoid air entrapment and potential
premature curing of cyanoacrylates
• Stroke adjustment for fine - tuning
of dispense characteristics
• Dispenses repeatable drop sizes down to 0.005 g
• Easy repair/replacement of wetted components
Theory of Operation
When used in conjunction with a pressure -time controller and
adhesive reservoir, the valve is opened by an internal, single acting cylinder and piston rod. After initiating the control cycle,
the piston is pulled, opening the PTFE flow channel, and
allowing adhesive to pass. At the end of the controlled open time,
pressure is released and the valve is closed via an internal spring
mechanism, closing off the flow channel. The amount of
dispensed adhesive is controlled by adjustment of air pressure,
valve open time, size of dispensing needle, and piston stroke.
NO FLOW
Weight
5 oz. (140 g)
Maximum Cycle
2 Shots per second
Fluid Inlet – 1⁄4" Tubing
Port Size
5⁄32"
Air Inlet
Fluid Pressure
Tubing
4 to 30 psi (0.25 to 2 bar)
Pneumatic Supply
Minimum: 60 psi (4.8 bar) / Maximum: 100 psi (7 bar)
Dispense Patterns
Drop, Dot, Bead
Used to Dispense
Instant Adhesives, Retaining Compounds, Threadlockers
Stroke Adjustment
Yes
Actuation
Foot
(1) 2 m Product Feed Line, PTFE lined, 1⁄4" OD
(1) LV Hand Held Applicator
(1) 2 m Pneumatic Tubing
(1) Needle Variety Kit
(1) Silicone Grease
(1) Manual
Parts Included
For Spare Parts and Accessories, see page 84.
For Fluid Compatibility Selector Chart, see page 63.
For Dispense Tips, see pages 80-81.
Additional Information
FLOW
Additional Accessories Sold Separately
98090 –
Loctite®
Shot Miser™
Reservoir
98079 –
Loctite®
Shot Miser™
Controller
97123 –
Loctite® Single
Channel Automatic
Controller
97007 / 97010 –
Loctite®
Integrated
Semi-Automatic
Controllers
97017 / 97020 –
Loctite® Integrated
Semi-Automatic
Controllers with
Low Level Sensor
982720 / 982721 /
982723 / 982724 /
982726 / 982727 –
Loctite® Bond-AMatic® Reservoirs
1022006 –
Loctite® Digital
Multi-Functional
Controller
97101 –
Loctite® Digital
Dispense
Controller
98501 –
Loctite®
Applicator
Holder
97293 – Loctite® Finger Switch for 97130
The RED represents the fluid path.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
59
DISPENSING
Hand Held Valves
G ENERAL P URPOSE A PPLICATORS
LOCTITE® MANUAL HAND HELD APPLICATOR
Item Number: 97111
The Loctite® Manual Hand Held Applicator is a consistent performing, highly reliable, adhesive
dispense valve. It features a manual trigger actuator that is ergonomically designed for comfort,
application control, and a low actuation force to reduce hand fatigue. It also incorporates a
suck-back feature that prevents dripping or stringing. This valve must be used in conjunction
with a Loctite® Bond-A-Matic® 3000 Reservoir (item 982726 for low viscosity, item 982727
for medium to high viscosity), sold separately. Since this valve is manually controlled,
it is not capable of timed dispensing or compatible with low level sensing.
Features:
•
•
•
•
•
•
Pistol grip provides comfort and control
Low actuation force to reduce hand fatigue
Suck- back feature ensures accuracy and control
Dispenses products up to 15,000 cP with 1⁄ 4" feed line (standard)
Dispenses products up to 80,000 cP with 3⁄ 8" feed line (optional)
Operational with manually controlled pressure reservoirs
Theory of Operation
The hand held applicator is a modular design made up of a
product shut - off valve and valve actuator. This type of design
provides quick on - line serviceability. The adjustable suck- back
feature eliminates stringing and dripping. The shut - off of the
Loctite® Hand Held Applicator takes place mechanically with the
spring return of the shutoff piston to the rest position. Choose
from four optional Loctite® Bond-A-Matic® Reservoirs that can
be used with the Loctite® Hand Held Applicator.
NO FLOW
TECHNICAL SPECIFICATIONS
Type
Manual
Viscosity Range
Low to Medium
Size
1.12" D x 5.2" L x 2.74" W
Weight
3.5 oz. (99.2 g)
Air Input
60 psi minimum
1
Product Inlet
⁄4 inch
Wetted Components
Acetal Copolymer, PTFE, PTFE Coated Metal
Dispense Patterns
Drop, Dot, Bead
Used to Dispense
Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
Stroke Adjustment
Yes
Actuation
Foot
Parts Included
Additional Information
(1) Hand Held Applicator (1) Applicator Grip
(1) Trigger Lever
(1) Needle Kit
(1) Manual
For Spare Parts and Accessories, see page 84.
For Fluid Compatibility Selector Chart, see page 63.
For Dispense Tips, see pages 80-81.
Additional Accessories Sold Separately
FLOW
The RED represents the fluid path.
60
98501 –
Loctite® Applicator
Holder
982726 / 982727 –
Loctite® Bond-A-Matic®
Reservoirs
97220 – 3⁄8" Feed Line Kit
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Hand Held Valves
LOCTITE® PNEUMATIC HAND HELD APPLICATOR
Item Number: 97112 – Foot Switch Activated
The Loctite® Pneumatic Hand Held Applicator (item 97112) is a consistent performing, highly
reliable, adhesive dispensing valve. It is ergonomically designed for comfortable, application
control. It also incorporates a suck- back feature that prevents dripping or stringing. This valve
must be used in conjunction with a Loctite® brand controller and product reservoir that are foot
switch activated. These are sold separately.
LOCTITE® PNEUMATIC HAND HELD APPLICATOR
Item Number: 97116 – Finger Switch Activated
The Loctite® Pneumatic Hand Held Applicator (item 97116) is a consistent performing, highly
reliable, adhesive dispense valve. It features a pneumatic trigger actuator that is ergonomically
designed for comfort, application control, and a low actuation force to reduce hand fatigue. It
also incorporates a suck- back feature that prevents dripping or stringing. This valve must be used
in conjunction with a Loctite® brand controller and product reservoir, sold separately.
Features of Pneumatic Hand Held Applicators:
•
•
•
•
Pistol grip provides comfort and control
Low actuation force to reduce hand fatigue
Suck- back feature ensures accuracy and control
Dispenses products up to 15,000 cP
with 1⁄ 4" feed line (standard)
• Dispenses products up to 80,000 cP
with 3⁄ 8" feed line (optional)
• Operational with manual, semi - automatic,
and automatic controllers
TECHNICAL SPECIFICATIONS
Type
Pneumatic
Viscosity Range
Low to Medium
Size
1.12" D x 5.2" L x 2.74" W
Weight
97112: 4.9 oz. (138.9 g)
Air Input
1⁄4
Product Inlet
Theory of Operation
Wetted Components
Both hand held applicators are a modular design made up of a
product shut-off valve and valve actuator. This type of design
provides quick on-line serviceability. The adjustable suck-back
feature eliminates stringing and dripping. The shut-off of all
hand held applicators takes place mechanically with the spring
return of the shut-off piston to the rest position. Henkel offers a
selection of Loctite® brand product reservoirs that can be used
with the Loctite® Hand Held Applicators.
97116: 12 oz. (340 g)
60 psi min.
inch
Acetal Copolymer, PTFE, PTFE Coated Metal
Dispense Patterns
Drop, Dot, Bead
Used to Dispense
Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
Stroke Adjustment
No
97112: Foot (Foot switch is
97116: Finger
not included with valve, but is (Finger switch is included)
included with all controllers)
(1) Hand Held Applicator
(1) Applicator Grip
(1) Needle Kit
(1) Manual
For Spare Parts and Accessories, see pages 84-85.
For Fluid Compatibility Selector Chart, see page 63.
For Dispense Tips, see pages 80-81.
Actuation
Parts Included
Additional Information
Additional Accessories Sold Separately
NO FLOW
98022 –
Loctite® 300 ml
Cartridge
Pusher
97007 / 97010 –
Loctite® Integrated
Semi-Automatic
Controllers
982720 / 982723 /
982726 / 982727 –
Loctite® Bond-A-Matic®
Reservoirs with Low Level
Sensing (97116 only)
FLOW
The RED represents the fluid path.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
1022006 –
Loctite® Digital
Multi-Functional
Controller
(97112 only)
97017 / 97020 –
Loctite® Integrated
Semi-Automatic
Controllers with
Low Level Sensors
982721 / 982724 –
Loctite® Bond-A-Matic®
Reservoirs
(97112 only)
97101 –
Loctite® Digital
Dispense
Controller
(97112 only)
98501 – Loctite®
Applicator Holder
97220 – Loctite® 3⁄8" Feed Line Kit
61
DISPENSING
Hand Held Valves
P INCH T UBE A PPLICATOR
LOCTITE® VARI-DROP™ APPLICATOR
Item Numbers: 97131 and 97132
The Loctite® Vari-Drop™ applicator is low cost, manually controlled pinch valve suitable
for dispensing low to medium viscosity products. The adjusting screw allows repeatable
dispense from drops to heavy beads. The quantity applied is dependent upon the stroke
set for the trigger, and how long the operator holds down the trigger.
Features:
• Accepts a variety of dispensing needles to apply precise amounts of product
• Low cost
• Designed with light blocking materials
for light curing adhesives
• Field serviceable
Theory of Operation
TECHNICAL SPECIFICATIONS
Type
The Loctite® Vari-Drop™ Applicator is used to manually
dispense Loctite® brand products at a controlled rate of flow. The
valve is capable of dispensing light to heavy beads or drops. The
design is cost effective and user friendly. The operator manually
pushes the finger switch down for flow, and releases the switch
to discontinue flow.
Pinch Tube
Viscosity Range
Low to Medium
5⁄8"
Size
Weight
H x 5⁄8" W x 61⁄4" L
1.5 oz. (42.5 g)
Air Input
100 psi
Fluid inlet
1⁄4"
Fluid Pressure
tube
100 psi maximum
Fluid Viscosity Range
100 to 80,000 cP
Wetted Components
PTFE, polyethylene
Tubing with PTFE
97131: Yes
97132: No
Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
Used to Dispense
Stroke Adjustment
No
Actuation
Finger
Parts Included
97131:
(1) Vari-Drop™ Applicator
(1) 7' x 1⁄4" OD PTFE Lined
Hose with Hose Guards
(1) Needle Kit 97262
(1) Manual
NO FLOW
97132:
(1) Vari-Drop™ Applicator
(1) Manual
For Spare Parts and Accessories, see pages 84-85.
For Fluid Compatibility Selector Chart, see page 63.
For Dispense Tips, see pages 80-81.
Additional Information
Additional Accessories Sold Separately
FLOW
The RED represents the fluid path.
62
98501 –
Loctite®
Applicator
Holder
982719 /
982722 –
Loctite® Bond-AMatic® 3000
Dispensers
98022 –
Loctite® 300 ml
Cartridge
Pusher
97220 – 3⁄8" Feed Line Kit
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Hand Held Valves
Dispense Controller and Reservoir are
required with these valves.
Loctite® Brand Hand Held Dispensing Valve
Fluid Capability Chart
PRODUCT
Loctite® LV
Hand Held Applicator
Loctite® Manual
Hand Held Applicator
Loctite® Pneumatic
Hand Held Applicator
Loctite® Pneumatic
Hand Held Applicator
Loctite® Vari-Drop™
Applicator
Item Number
97130
97111
97112
97116
97131 / 97132
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Accelerators
Acrylics
Activators
Anaerobics
Cyanoacrylates
Inks
✓
✓
✓
✓
Oils
Paints
Primers
Reagents
Solvents
✓
✓
✓
UV & Light Cure
Fluids
UV Anaerobics
Water
✓
For additional information and the full line of equipment, visit www.equipment.loctite.com.
63
DISPENSING
Valves & Pumps
Valves & Pumps
Loctite® brand dispensing valves and pumps are value -added, robust, dispensing valves for
adhesive or fluid delivery. Each valve is uniquely designed to meet different manufacturing
needs. These valves should be combined with a reservoir and/or a controller. Selection of a
Loctite® brand valve or pump is based on the chemistry and viscosity of the adhesive or fluid
being used and process requirements.
PRODUCT
Item
Number
Type
Viscosity
Range
Dispense
Patterns
Used to Dispense
Stroke
Suck-Back
Adjustment
High
Precision
Low to
Medium
Drop,
Dot, Bead
Gel Instant Adhesives,
Instant Adhesives,
Retaining Compounds,
Threadlockers
Yes
Yes
High
Precision
Low to
Medium
Drop,
Dot, Bead,
Microdots
Light Cure/Acrylics
Yes
No
HIGH PRECISION VALVES
Loctite®
Stationary
Applicator Valve
Loctite®
Micro Needle
Valve
97113
97114
98084
HIGH PERFORMANCE DIAPHRAGM VALVES
Loctite®
Light Cure
Dispense Valve
98009
High
Performance
Diaphragm
Low to
Medium
Drop,
Dot, Bead
Light Cure/Acrylics,
Retaining Compounds,
Threadlockers
Yes
No
Loctite®
Cyanoacrylate
Dispense Valve
98013
High
Performance
Diaphragm
Low to
Medium
Drop,
Dot, Bead,
Microdots
Instant Adhesives,
Retaining Compounds,
Threadlockers
Yes
No
Drop,
Dot, Bead
Light Cure/Acrylics
Instant Adhesives,
Retaining Compounds,
Threadlockers
No
No
Spray
Primers, Activators,
Accelerators
Yes
No
Yes
Yes
GENERAL DUTY DIAPHRAGM VALVES
Loctite®
Diaphragm
Valve
97135
97136
General Duty
Diaphragm
0 to
2,500 cP
2,500 to
5,000 cP
SPRAY VALVES
Loctite®
Spray Valve
98520
Spray Valve
Low
HIGH VISCOSITY FLUID AND PASTE VALVES
Loctite®
Poppet Valve
Loctite®
Stainless Steel
Poppet Valve
986300
High
Viscosity
Fluid and
Paste
Valves
Medium to
High
98085
Pinch Tube
Valve
Low to
Medium
983330
Positive
Displacement
Valve
983914
982621
Anaerobic Gasketing,
Retaining Compounds,
Threadlockers
Drop, Bead
Paste Silicones
PINCH TUBE VALVE
Loctite®
Shot Miser™
Dispense Valve
Drop, Dot,
Bead
Instant Adhesives,
Retaining Compounds,
Threadlockers
No
No
Drop
Retaining Compounds,
Threadlockers,
Any single-component,
non-moisture-curing, low
to medium viscosity fluid
(<100,000 cP)
Yes
No
POSITIVE DISPLACEMENT PUMP
Loctite®
Positive
Displacement
Pump
64
Low to
Medium
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Valves & Pumps
Dispense Controller and Reservoir are
required with these valves.
H IGH P RECISION VALVES
LOCTITE® STATIONARY APPLICATOR VALVE
Item Numbers: 97113 and 97114
The Loctite® Stationary Applicator Valve is a slim, lightweight, patented, seal-less
dispense valve. It utilizes double-acting, adjustable air to open and close cylinders
which allows for precise valve sequencing to meet your most stringent
pressure-time dispense requirements. This valve also features
adjustable suck-back to eliminate stringing and dripping, and
modular design providing for on-line serviceability. It is suitable
Type
with all low to medium adhesive viscosities. This valve must be
Viscosity Range
used in conjunction with a Loctite® brand controller, product
Size
reservoir and dispense tip, sold separately.
TECHNICAL SPECIFICATIONS
High Precision
Low to Medium
7.6" L x 2.4" H
Weight
Features:
0.75 lbs.
Maximum Fluid Pressure
• Slim, lightweight, patented seal - less dispense valve
• Modular design of product shut - off valve and valve
actuator provides on - line serviceability
• Fail safe – spring assisted close
• Suck- back feature eliminates product stringing
• Double - acting cylinder allows adjustable opening and
closing speed for process control
• Cycle rate exceeds 36 per minute
• Operational with pressure - time applications
• Dispenses fluids up to 15,000 cP (item 97113) or
80,000 cP (item 97114)
Air Inlet
60 to 80 psi minute
1⁄4"
Fluid Outlet
Dispense Patterns
Stroke Adjustment
Suck-Back
Yes
Valve Type
Pressure-Time Dispense
Wetted Components
Product flows to the dispense valve from the reservoir. Adjusting
the double - acting cylinders allows control of the valve opening
and closing rates. Use of the adjustable suck-back feature
eliminates dripping and stringing. These valves can be used in
both the stationary or advancing modes.
Parts Included
FLOW
97114: 3⁄8" OD Tube
UNF, Tip Adapter, Luer-Lok® Output Fitting
Drop, Dot, Bead
Gel Instant Adhesives, Instant Adhesives,
Retaining Compounds, Threadlockers
Yes
Used to Dispense
Theory of Operation
The RED represents
the fluid path.
Tubing Fitting
97113: 1⁄4" OD Tube
Product Inlet
Air Cylinder
NO FLOW
80 psi
5⁄ 32"
Air Inlet Port
Acetal Copolymer, PTFE and PTFE Coated Metals
Double acting diaphragm cylinder / flow control of
both ports / spring return for fail safe function
(1) Feed Line
(1) Dispense Valve
(1) Anti-Bubbler Adapter and Sleeve
(1) Needle Kit
(1) Manual
For Spare Parts and Accessories, see pages 84-85.
For Fluid Compatibility Selector Chart, see pages 73-74.
For Dispense Tips, see pages 80-81.
Additional Information
Additional Accessories Sold Separately
97123 – Loctite®
Single Channel
Automatic
Controller
97007 / 97010 –
Loctite® Integrated
Semi-Automatic
Controllers
982726 / 982727 –
Loctite®
Bond-A-Matic®
Reservoirs
97101 –
Loctite® Digital
Dispense
Controller
97017 / 97020 –
Loctite® Integrated
Semi-Automatic
Controllers with
Low Level Sensors
1022006 –
Loctite® Digital
Multi-Functional
Controller
98022 – Loctite®
300 ml Cartridge
Pusher
982720 / 982723 –
Loctite® Bond-AMatic® Reservoirs
with Low Level
Sensors
984691 –
Loctite®
Advancing
Slide (2" Stroke)
97115 – Loctite® Electric Rotorspray
65
DISPENSING
Valves & Pumps
LOCTITE® MICRO NEEDLE VALVE
Item Number: 98084
The Loctite® Micro Needle Valve is a pneumatically-operated, needle and seat valve that is designed
for very small adhesive drops in a pressure-time dispensing system. It is precise down to 0.0005 ml,
and has an adjustable stroke control to pinpoint your exact dispense requirement. This valve features
the convenience to directly attach filled product syringes ranging in size from 5 to 30 ml for
dispensing. Only stainless steel cannula dispense needles should be used for proper dispensing
and the valve must be used in conjunction with a Loctite® brand controller, product reservoir
and dispense tip, sold separately.
Features:
•
•
•
•
Dispenses low to medium viscosity UV curing products down to a fraction of a microliter
Short opening stroke provides extremely fast, positive shut - off
External stroke control adjustment makes it easy for operator to fine tune shot sizes
Compact design allows for mounting flexibility and
easy integration into automated applications
• Capable of connecting to syringe barrels
TECHNICAL SPECIFICATIONS
as small as 5 ml to 30 ml
Type
High Precision
• Change the luer fitting to a tube fitting
Viscosity Range
Low to Medium
and any size pressure reservoir can be used
Size
5" L x 1.1" D (127 mm L x 28.5 mm D)
• Designed to be used with high precision
Weight
8 oz. (227 g)
stainless steel needles
Maximum Fluid Pressure
Theory of Operation
100 psi (7 bar)
1⁄8"
Fluid Inlet
Application of adhesive using the Loctite® Micro Needle Valve is
achieved in conjunction with a pressure -time controller and
adhesive reservoir system. The controller directs the pressurized
air to the actuator of the valve through the inlet air port for a pre determined period of time. This causes the normally
closed, needle rod assembly to retract from the seat inside the
dispensing tip, allowing the adhesive to flow from the material
inlet to the dispensing tip. At the end of the cycle, the controller
releases the input air pressure, allowing the spring to return the
needle rod back to its original closed position.
NPT
10-32 UNF-2B Male Luer-Lok®
Air Inlet
Pneumatic Supply
Minimum – 60 psi (4.8 bar)
Maximum – 100 psi (7 bar)
1⁄4"
Product Inlet
1⁄4"
Fluid Outlet
NPT
UNF Luer-Lok® Tip
Dispense Patterns
Drop, Dot, Bead
Used to Dispense
Light Cure/Acrylics
Stroke Adjustment
Yes
Suck-Back
No
Valve Type
Pressure-Time Dispense
Wetted Components
Acetal Copolymer, Stainless Steel, PTFE
(1) Needle Variety Kit – Uses stainless steel needles only
(1) Fluid Fitting, 1⁄ 8" NPT x 1⁄4" Tube
(1) Product Feed Line, 1⁄4"
(1) Air Line Tubing, 5 ft.
(1) Micro Needle Valve
(1) Manual
Parts Included
For Spare Parts and Accessories, see pages 84-85.
For Fluid Compatibility Selector Chart, see pages 73-74.
For Dispense Tips, see pages 80-81.
Additional Information
Additional Accessories Sold Separately
NO FLOW
FLOW
The RED represents the fluid path.
66
97123 – Loctite®
Single Channel
Automatic
Controller
97208 – Loctite®
10 ml Syringe
Air Line Adapter
97245 – Loctite®
30 ml Syringe
Air Line Adapter
97007 / 97010 –
Loctite®
Integrated
Semi-Automatic
Controllers
97017 / 97020 –
Loctite® Integrated
Semi-Automatic
Controllers
with Low
Level Sensors
982720 / 982721 / 982723 /
982724 / 982726 /
982727 –
Loctite®
Bond-A-Matic®
Reservoirs
1022006 –
Loctite® Digital
Multi-Functional
Controller
97101 –
Loctite® Digital
Dispense
Controller
984691 – Loctite®
Advancing
Slide
(2" Stroke)
98099 – Loctite® Precision Filter and Regulator
(required for use with all pressure-time dispense controllers, other than 97123)
985281 – Loctite® Bracket, 997569 – Loctite® Silicone Grease
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
H IGH P ERFORMANCE D IAPHRAGM VALVES
LOCTITE® LIGHT CURE DISPENSE VALVE
Item Number: 98009
Valves & Pumps
The Loctite® Light Cure Dispense Valve (item 98009) is a diaphragm
valve that provides high-resolution stroke adjustment and
consistent no - drip repeatable dispensing. It is suitable for all low
to medium viscosity light curable adhesives, but can also be used
for retaining compounds and threadlockers. It has a small profile
and simple design that minimizes space requirements and
facilitates routine preventative maintenance. This valve must be
used in conjunction with a Loctite® brand controller, product
reservoir and dispense tip, sold separately.
98009 – Loctite® Light Cure
Dispense Valve
LOCTITE® CYANOACRYLATE DISPENSE VALVE
Item Number: 98013
The Loctite® Cyanoacrylate Dispense Valve is a diaphragm valve
that provides high-resolution stroke adjustment and consistent,
no - drip, repeatable dispensing. It is suitable for all low to
medium viscosity cyanoacrylate adhesives but can also be used
for retaining compounds and threadlockers. It has a small profile
and simple design that minimizes space requirements and
facilitates routine preventative maintenance. This valve must be
used in conjunction with a Loctite® brand controller, product
reservoir and dispense tip, sold separately.
High Performance Diaphragm
Viscosity Range
Low to Medium
Size
3.090" x 1.060" diameter
Weight
4.5 oz. (128 g)
Maximum Fluid Pressure
70 psi
1⁄8"
1⁄4"-28
Fluid Outlet
Compact size and weight
Adjustable fluid flow control
Fail safe, air to open, spring close
Positive shutoff, no seals
Bubble - free, no - drip dispensing
Field serviceable
Easy cleaning without valve de-mounting
Cycle rate exceeds 500 per minute
Air Input
Dispense Patterns
FLOW
Tube Fitting
70 to 90 psi
Single Acting, Spring Return, Stroke Control,
Aluminum, Hard Coated Finish
Drop, Dot, Bead, Microdot
Air Cylinder
Product flows to the dispense valve from the reservoir. Flow
rate is adjusted by turning the flow control dial on top of the
valve. The valves can be used in both the stationary or
advancing modes.
NPT
UNF, Tip Adapter, Luer-Lok® Output Fitting
1⁄4"
Air Inlet Port
Theory of Operation
NO FLOW
TECHNICAL SPECIFICATIONS
Type
Fluid Inlet
Features of Dispense Valves:
•
•
•
•
•
•
•
•
98013 – Loctite® Cyanoacrylate
Dispense Valve
Used to Dispense
98009: Light Cure/Acrylics, 98013: Gel Instant Adhesives,
Retaining Compounds,
Retaining Compounds,
Threadlockers
Threadlockers
Stroke Adjustment
Yes
Suck-Back
No
Valve Type
Diaphragm
98009:
98013: Chamber: Ultra High
Chamber: Acetal Copolymer Molecular Weight Polyethylene
Diaphragm: Ultra High
Diaphragm: Ultra High
Molecular Weight Irradiated
Molecular Weight Irradiated
Polyethylene
Polyethylene
Wetted Components
Mounting Hole
(1) 10-32 UNF
Parts Included
(1) 5 ft. Air Line Tubing (attached to valve)
(1) Needle Kit
(1) 6 ft. Product Tubing, 1⁄4" OD, PTFE Lined
(1) Valve Mount Screw (1) Valve Assembly (1) Manual
For Spare Parts and Accessories, see pages 84-85.
For Fluid Compatibility Selector Chart, see pages 73-74.
For Dispense tips, see pages 80-81.
Additional Information
Additional Accessories Sold Separately
The RED represents the fluid path.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
97123 – Loctite®
Single Channel
Automatic
Controller
97007 / 97010 –
Loctite® Integrated
Semi-Automatic
Controllers
982726 / 982727 –
Loctite® Bond-AMatic® Reservoirs
97101 –
Loctite® Digital
Dispense
Controller
97017 / 97020 –
Loctite® Integrated
Semi-Automatic
Controllers with
Low Level Sensors
982720 / 982723 –
Loctite® Bond-AMatic® Reservoirs
with Low Level
Sensors
98022 –
Loctite® 300 ml
Cartridge
Pusher
984691 – Loctite®
Advancing
Slide
(2" Stroke)
1022006 –
Loctite® Digital
Multi-Functional
Controller
67
DISPENSING
Valves & Pumps
G ENERAL D UTY D IAPHRAGM VALVES
LOCTITE® DIAPHRAGM VALVE
Item Numbers: 97135 and 97136
The Loctite® Diaphragm Valve is a pneumatically - activated dispense valve that utilizes a floating PTFE diaphragm for
consistent, trouble -free dispensing. It is suitable for all low to medium viscosity light curable adhesives, retaining compounds,
and threadlockers. The valve has a simple design that minimizes space requirements and facilitates routine preventative
maintenance. It is ideal to support automatic rotospray and electric rotorspray applications, and must be used
in conjunction with a Loctite® brand controller, product reservoir and dispense tip, sold separately.
Features:
•
•
•
•
Cost effective valve for use with pressure - time dispense systems
Modular design and floating diaphragm allow for easy cleaning or repair
Fail safe, spring assisted close
Internal components are made of PTFE
to prevent premature curing
• Flow rates can be increased with use of a 3⁄8" feed line
• Available in low viscosity (item 97135) and medium
viscosity (item 97136) versions
Theory of Operation
TECHNICAL SPECIFICATIONS
Application of adhesive using the Loctite® Diaphragm Valve is
achieved in conjunction with a pressure-time controller and
adhesive reservoir system. The opening of the diaphragm takes
place by pressurizing the internal single -acting cylinder and
piston. Initiating a dispense cycle causes the piston to lift from
the diaphragm. The adhesive pressure then pushes the diaphragm
away from the flow path, allowing the adhesive to flow to the
dispense needle. At the end of the dispense time, pressure is
released and an internal spring reseats the diaphragm over the
flow path. The amount of adhesive applied is controlled by the
dispense time, air pressure, and dispense needle gauge size.
Type
General Duty Diaphragm
Viscosity Range
Size
0 to 2,500 cP
2,500 to 5,000 cP
5" L x 1.25" D (127 mm L x 32 mm D)
Weight
10.5 oz. (300 g)
Maximum Fluid Pressure
7 to 58 psi (0.5 to 4 bar)
1⁄4"
Fluid Inlet
Tubing or upgrade to 3⁄8" (Item 97220)
5⁄ 32"
Air Inlet
Pneumatic Supply
Product Inlet
Maximum – 100 psi (7 bar)
97135: 1⁄4" OD
97136: 1⁄ 8" OD
1⁄4"
Fluid Outlet
Tubing
Minimum – 73 psi (5 bar)
UNF Luer-Lok® Tip
Dispense Patterns
Drop, Dot, Bead
Used to Dispense
Light Cure/Acrylics, Retaining Compounds, Threadlockers
Stroke Adjustment
No
Suck-Back
No
Valve Type
Pressure-Time Dispense
Wetted Components
Acetal, Stainless Steel, PTFE Coated Metals
(1) Diaphragm Valve
(1) Product Feed Line, 1⁄4" inch
(1) Needle Variety Kit
(1) Manual
For Spare Parts and Accessories, see pages 84-85.
Additional Information
For Fluid Compatibility Selector Chart, see pages 73-74.
For Dispense Tips, see pages 80-81.
Additional Accessories Sold Separately
Parts Included
NO FLOW
FLOW
The RED represents the fluid path.
68
98090 – Loctite®
Shot Miser™
Reservoir
98079 – Loctite®
Shot Miser™
Controller
97123 – Loctite®
Single Channel
Automatic
Controller
97007 / 97010 –
Loctite® Integrated
Semi-Automatic
Controllers
97017 / 97020 –
Loctite® Integrated
Semi-Automatic
Controllers with
Low Level Sensors
982720 / 982721 / 982723 /
982724 / 982726 /
982727 –
Loctite®
Bond-A-Matic®
Reservoirs
97101 –
Loctite® Digital
Dispense
Controller
97115 – Loctite®
Electric Rotorspray
97118 / 97119 – Loctite®
Advancing Slides
1022006 –
Loctite® Digital
Multi-Functional
Controller
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Valves & Pumps
S PRAY VALVES
LOCTITE® SPRAY VALVE Item Number: 98520
LOCTITE® SPRAY VALVE CONTROLLER Item Number: 98521
The Loctite® Spray Valve (item 98520) provides an effective solution for automatic spraying of low
viscosity primers, accelerators and activators up to 1,200 cP, with high precision and long term
reliability. It features an external stroke adjustment, providing consistent performance over a wide
range of operating conditions. The high performance needle and seat design ensures effective
control of over-spray and nozzle dripping. This valve is most effectively controlled using the
Loctite® Spray Valve Controller (item 98521), providing digital pressure control of both on/off
timing and atomization air, sold separately.
Features:
98520 – Loctite®
Spray Valve
Loctite Spray Valve
®
• High precision, short stroke, needle and seat design
providing repeatable spray pattern performance
• Air pressure and stroke adjustment allow
a wide range of spray pattern coverage control
• Full stainless steel body and wetted parts provide long
term performance and durability
• Cycle rate up to 600 per minute
• Easy cleaning and servicing
• 0.046" nozzle diameter (standard) provides consistent
round full cone pattern
• Optional 0.014" and 0.028" diameter nozzle kits
for lower spray pattern applications
Loctite® Spray Valve Controller
98521 – Loctite® Spray Valve Controller.
(See page 17)
TECHNICAL SPECIFICATIONS
98520 – Loctite® Spray Valve
Type
Spray Valve
Viscosity Range
Up to 1,200 cP
Air Pressure Supply
60 to 100 psi
1⁄8"
Fluid Inlet Port
• Microprocessor - based, timed controller
• Fully independent valve/open close and
atomization air supply
• 3 separate timed sequences – pre - spray, valve on,
post - spray / valve off
• Timed or manual mode with foot pedal control
• All time modes maintained in memory
with AC power disconnected
Product flows from a reservoir under air pressure as provided
by the Loctite® Spray Valve Controller. The controller also
provides air to open/close the valve and a separate atomizing
air source to the Loctite® Spray Valve nozzle assembly. Timing
and pressure controls for atomizing air, fluid line pressure,
valve stroke adjustment, height from surface, and material
viscosity can be adjusted to optimize required dispense
quantity and coverage pattern.
0.8 lbs. (385 g)
1"/0.25", 2"/ 0.50", 3"/ 0.75",
4"/1.5", 5"/3" (0.046 nozzle)
Spray – Circular
Used to Dispense
Accelerators, Activators, Primers
Stroke Adjustment
Yes
Suck-Back
No
Valve Type
Pressure-Time Dispense
Wetted Components
304 Stainless Steel
(1) Valve Mounting Bracket with screw
(1) Valve Assembly
(1) Fluid Line Assembly
(1) Air Line Assembly
(1) Operation Manual
(1) Hex Key
(1) Seat Removal Tool
Parts Included
98521 – Loctite® Spray Valve Controller
120 VAC
Power Source
1⁄8"
Air Supply
Weight
Atomizing Air
ON
Tube Fitting – 100 psi max
5.5 lbs.
Dimensions
Atomizing Air
OFF
NPT
Weight
Spray Height / Pattern
Diameter
Dispense Pattern
2.5" H x 12.4" L x 7.6" D
(1) Controller Unit & Power Cord
(1) Foot Pedal
(1) Air Supply Line & Filter – 4 ft.
For Spare Parts and Accessories, see pages 84-85.
For Fluid Compatibility Selector Chart, see pages 73-74.
Parts Included
Additional Information
Additional Accessories Sold Separately
NO FLOW
The RED represents the fluid path.
FLOW
989268 –
0.014" Nozzle Kit
989269 –
0.028" Nozzle Kit
984621 – Loctite®
Replacement Foot Switch
982720 / 982723 –
Loctite® Bond-AMatic® Reservoirs
with Low Level
Sensors
982726 / 982727 –
Loctite®
Bond-A-Matic®
Reservoirs
69
DISPENSING
Valves & Pumps
H IGH V ISCOSITY F LUID
AND
PASTE VALVES
LOCTITE® POPPET VALVES Item Numbers: 986300 and 983914
LOCTITE® STAINLESS STEEL POPPET VALVE Item Number: 982621
The Loctite® Poppet Valves are designed to dispense Loctite® brand high viscosity
anaerobic form - in - place gasketing products, structural acrylics, and silicones. The valves are
typically used in conjunction with a positive displacement pump or a pressure - time system.
They feature a suck- back capability and can operate at fluid pressures up to 625 psi. Item
986300 uses dispense nozzles with a bayonet style mounting that improves nozzle end
location and can withstand the high fluid pressures required of high viscosity fluid
dispensing. Items 983914 and 982621 are equipped with a 1⁄ 8" NPT outlet for Luer- Lok® and
standard needle dispensing. All valves have stroke adjustment capability and are treated
with a proprietary Loctite® coating to prevent premature adhesive curing.
986300 and 983914 –
Loctite® Poppet Valves
Features:
•
•
•
•
•
Poppet design gives valve “suck- back” feature
Bayonet type mounting of nozzles provides end location repeatability
Handles product pressures up to 625 psi
Positive mounting surface
High strength plastic material versions are specially treated
to be inert to Loctite® brand products
• Stainless steel version is also specially treated and
is recommended for abrasive and silicone products
982621 – Loctite® Stainless
Steel Poppet Valve
Theory of Operation
Use the Loctite® Poppet Valve to apply product in drops and
beads with a semi or fully automatic dispensing system. The
valve can be used in both the stationary or advancing modes.
They may be used with the Loctite® Pump - A - Bead™ II or any
other dispense system that can provide a source of pressurized
product and a 4-way pneumatic valve.
TECHNICAL SPECIFICATIONS
Type
High Viscosity Fluids and Pastes
Viscosity Range
Medium to High anaerobics up to
Low Viscosity silicone products
Size
5.28" H x 2.00" D
Weight
NO FLOW
FLOW
1.3 lb. (0.59 kg) valve plus fittings and tubing
Maximum Fluid Pressure
Should not exceed 625 psi
Air Input
60 psi
1⁄ 4"
Inlet
NPT
Dispense Tip Style
986300: Bayonet Style
983914 and 982621: 1⁄ 8" NPT for
Luer-Lok® dispense tips
Used to Dispense
Anaerobic Gasketing,
Retaining Compounds,
Threadlockers
Modified Silanes, Silicones
Dispense Patterns
Bead, Drop
Stroke Adjustment
Yes
Suck-Back
Yes
Valve Type
Pressure-Time Dispense
Wetted Components
Acetal Copolymer treated with a proprietary Loctite® brand process
Parts Included
(1) Acetal Copolymer Body or Stainless Steel Poppet Valve with:
(2) 4' Control Air Tubing
(1) 4' Product Supply Tubing
(1) Accessory Kit
(1) Manual
For Spare Parts and Bayonet type needles, see pages 84-85.
For Fluid Compatibility Selector Chart, see pages 74-75.
For Luer-Lok® Dispense Tips, see pages 80-81.
Additional Information
Additional Accessories Sold Separately
The RED represents the fluid path.
70
986000 –
Loctite®
Pump-A-Bead™
984691 –
Loctite® Advancing
Slide (2" Stroke)
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Valves & Pumps
P INCH T UBE VALVE
LOCTITE® SHOT MISER™ DISPENSE VALVE
Item Number: 98085
The Loctite® Shot Miser™ Dispense Valve is an economical pinch tube style valve that features
an adjustable stroke for enhanced shot size control. This valve has a disposable fluid path for
fast, easy and low cost replacement. This valve must be used in conjunction with a Loctite®
brand controller and product reservoir, sold separately.
Features:
•
•
•
•
•
•
•
Pneumatically- actuated automatic dispense valve
Pinch - tube disposable fluid path for fast, easy and low cost maintenance
Dispenses dots or beads
1⁄ 4" diameter product feed tube
Adjustable valve stroke for enhanced shot size control
Replaceable pneumatic actuator
Integral Luer- Lok® fitting accepts all Loctite® brand dispense needles
Theory of Operation
Application of adhesive using the Loctite® Shot Miser™ Dispense
Valve is achieved in conjunction with a pressure - time controller
and adhesive reservoir system. The opening and closing of the
valve is controlled by the system’s timer controls. When the
dispense cycle is initiated, the piston pulls away from the pinch
tube channel in the valve, opening the flow path, and allowing
adhesive to pass. At the end of the dispense cycle, pressure is
then reapplied to the piston, closing the flow path. The amount
of dispensed adhesive is controlled by adjustment of air
pressure, valve open time, and the size
of the dispensing needle.
TECHNICAL SPECIFICATIONS
Type
Pinch Tube Valve
Viscosity Range
Low to Medium
Size
5.2" W x 1.75" L x 6.4" H
Weight
0.5 lbs.
Maximum Fluid Pressure
100 psi
1⁄4"
Fluid Inlet
Tube
Luer-Lok® Tip
Outlet
Dispense Patterns
Dot, Drop, Bead
Used to Dispense
Instant Adhesives, Retaining Compounds, Threadlockers
Stroke Adjustment
No
Suck-Back
No
Valve Type
Pressure-Time Dispense
Wetted Components
Acetal Copolymer, Stainless Steel, PTFE Coated Metals
(1) Dispense Valve with 1⁄4" diameter Product Feed Tube
(1) Dispense Needle Sample Kit
(1) Valve Air Line
(1) Manual
Parts Included
For Spare Parts and Accessories, see pages 84-85.
For Fluid Compatibility Selector Chart, see pages 74-75.
For Dispense Tips, see pages 80-81.
Additional Information
NO FLOW
FLOW
The RED represents the fluid path.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Additional Accessories Sold Separately
97123 – Loctite®
Single Channel
Automatic
Controller
97007 / 97010 –
Loctite® Integrated
Semi-Automatic
Controllers
982726 / 982727 –
Loctite®
Bond-A-Matic®
Reservoirs
97101 –
Loctite® Digital
Dispense
Controller
97017 / 97020 –
Loctite® Integrated
Semi-Automatic
Controllers with
Low Level Sensors
982720 / 982723 –
Loctite® Bond-AMatic® Reservoirs
with Low Level
Sensors
1022006 –
Loctite® Digital
Multi-Functional
Controller
98022 –
Loctite® 300 ml
Cartridge
Pusher
984691 –
Loctite®
Advancing
Slide
(2" Stroke)
71
DISPENSING
P OSITIVE D ISPLACEMENT P UMP
LOCTITE® POSITIVE DISPLACEMENT PUMP
Item Number: 983330
Valves & Pumps
The Loctite® Positive Displacement Pump features a patented, seal-less design. It is specifically
designed to dispense Loctite® brand threadlockers and retaining compounds in rotospray
applications with a high degree of precision. The dispense capability of this pump is 0.02 to 0.4 cc.
It has a modular design for easy maintenance. For rotospray applications, it is normally used with
the Loctite® Digital Multi- Function Controller (item 1022006).
Features:
•
•
•
•
•
•
•
•
•
Positive displacement
Pneumatically - operated
Designed for compatibility with Loctite® brand rotospray workstations
Modular design of product shut- off valve and valve actuator
provides on - line serviceability
Cycle rate for low viscosity products
exceeds 120 per minute
Small, easy - to - use design
Adjustable stroke to control the amount
of material dispensed
Compatible with a wide range of fluids
Type
Repeatable and consistent delivery of product
TECHNICAL SPECIFICATIONS
Positive Displacement Pump
Viscosity Range
Theory of Operation
Low to Medium
Size
Use the Loctite® Positive Displacement Pump for rotospraying
low to medium viscosity fluids. Typically, this unit is used in
conjunction with a gravity feed reservoir. The gravity feed
reservoir will transfer the material from the storage tank to
the pump, which supplies material to the dispensing area.
9.15" H x 1.88" D (maximum) / 2.6" W (with connections)
Weight
1.7 lbs.
Air Input
60 to 90 psi
3⁄8"
Product Line Feed
Fluid Capacity
OD before pump, 1⁄4" OD after pump
0.02 to 0.40 cc per shot
Cycle Speed
2 cycles per second maximum (adjustable)
Dispense Patterns
Drop
Used to Dispense
Retaining Compounds, Threadlockers,
Any single-component, non-moisture-curing,
low to medium viscosity fluid (<100,000 cP)
Stroke Adjustment
Yes
Suck-Back
No
Valve Type
Positive Displacement
Wetted Components
Acetal Copolymer, Stainless Steel, and PTFE Coated Metals
Parts Included
(1) Positive Displacement Pump
(1) Feed Line Accessory Kit
(1) Mounting Bracket
(1) Air Line Kit (1) Manual
For Spare Parts and Accessories, see pages 84-85.
For Fluid Compatibility Selector Chart, see pages 73-74.
For Dispense Tips, see pages 80-81.
Additional Information
Additional Accessories Sold Separately
NO FLOW
1022006 –
Loctite® Digital
Multi-Functional
Controller
FLOW
982880 –
Loctite® 4 Liter
Gravity Feed
Reservoir
Loctite®
Rotospray 9000
Applicator
The RED represents the fluid path.
LOCTITE® ROTOSPRAY 9000 APPLICATOR
The Loctite® Rotospray 9000 Applicator is a pneumatically - powered applicator used for applying 360 degree
beads of a fluid on the inside diameter of any surface or threaded hole. Common materials applied are
retaining compounds, threadlockers, activators/primers, and oils. Common applications are engine cup plug
sealing, bearing retaining, and motor magnet bonding. Rotospray applicators can be used in a variety of
applications and configurations, and are typically used in conjunction with the Loctite® Positive Displacement
Pump (item 983330) and Loctite® 4 Liter Gravity Feed Reservoir (item 982880). If you have an application
requiring an internal 360 degree bead, contact the Henkel technical information department
at 1-800-LOCTITE, for the right rotospray applicator for your application.
72
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Valves & Pumps
Dispense Controller and Reservoir are
required with these valves.
Loctite® Brand Valve & Pump
Fluid Capability Chart
PRODUCT
Loctite® Stationary
Applicator Valve
Loctite® Micro
Needle Valve
Loctite® Light Cure
Dispense Valve
Loctite® Cyanoacrylate
Dispense Valve
Loctite® Diaphragm
Valve
Item Numbers
97113 / 97114
98084
98009
98013
97135 / 97136
✓
✓
✓
✓
✓
Accelerators
Acrylics
✓
✓
Activators
Anaerobics
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Anaerobic Gasketing
Cyanoacrylates
Inks
Lubricants
✓
✓
✓
✓
Modified Silanes
Non-Abrasive Greases
Oils
One-Part Epoxies
Paints
✓
✓
✓
Primers
Reagents
Silicones
Solvents
UV & Light Cure Fluids
UV Anaerobics
Water
✓
✓
✓
✓
For additional information and the full line of equipment, visit www.equipment.loctite.com.
✓
✓
✓
✓
73
DISPENSING
Valves & Pumps
Loctite® Brand Valve & Pump
Fluid Capability Chart
PRODUCT
Loctite® Spray Valve
Loctite® Poppet Valve
Loctite® Stainless Steel
Poppet Valve
Loctite® Shot Miser™
Dispense Valve
Loctite® Positive
Displacement Pump
Item Numbers
98520
986300 / 983914
982621
98085
983330
✓
✓
✓
✓
✓
Accelerators
✓
✓
Acrylics
Activators
✓
✓
✓
Anaerobics
Anaerobic Gasketing
✓
✓
Cyanoacrylates
Inks
Lubricants
✓
✓
✓
Modified Silanes
✓
Non-Abrasive Greases
✓
✓
✓
✓
Oils
✓
One-Part Epoxies
Paints
Primers
Reagents
✓
✓
✓
✓
UV & Light Cure Fluids
UV Anaerobics
Water
74
✓
✓
✓
✓
Silicones
Solvents
✓
✓
✓
✓
✓
✓
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Pail Pumps
Pail Pumps
Henkel offers Loctite® brand pail pump systems to effectively dispense both low viscosity
fluids and high viscosity pastes from 5 and 55 gallon containers. These systems are very
durable and can be relied on for long term performance in the toughest working
environments. These systems are typically integrated into a complete dispensing system
for a single component product, or used as a feed system for multiple component products.
LOCTITE® LOW VISCOSITY FLUID PUMPS
The Loctite® Low Viscosity Fluid Pumps are specifically designed to dispense self - leveling
products packaged in 5 gallon pails up to 55 gallon drums or tanks. The various pump
ratios are suited for pumping low to medium viscosity fluids. These pumps are air
operated and deliver various product output volumes determined by the pump
ratio and input pressure.
Features:
• Choice of two pump and seal materials – Carbon steel
with Viton seals or inert metal with EPR seals
• 5 gallon pail or 55 gallon drum or tank capability
• 1:1, 3:1, or 14 :1 pump ratio versions (liquid to air pressure)
Theory of Operation
These units, when configured with the necessary air
and product hoses, air and fluid regulators, dispense
valves, tips and fittings, will pump self - leveling, low
to medium viscosity fluids from 5 gallon pails
up to 55 gallon drums or tanks.
Item
Number
Ratio
Output
per
Stroke
Material
Container
988510
1:1
2.9 in3
Carbon Steel
55 Gallon
500
988514
3:1
7.9 in3
Carbon Steel
55 Gallon
50,000
988516
3:1
7.9 in3
Inert Metal
55 Gallon
50,000
988517
3:1
7.9 in3
Carbon Steel
5 Gallon
50,000
988519
3:1
7.9 in3
Inert Metal
5 Gallon
50,000
988520
14:1
1.7 in3
Carbon Steel
55 Gallon
250,000
988522
14:1
1.7 in3
Inert Metal
55 Gallon
250,000
(Highlighted in Purple in Component Diagram Below)
988523
14:1
1.7 in3
Carbon Steel
5 Gallon
250,000
•Low Viscosity Fluid Pump with appropriate tube for
either 5 gallon or 55 gallon as ordered – 1E
988525
14:1
1.7 in3
Inert Metal
5 Gallon
250,000
Typical Fluids Handled and Parts Supplied
• Carbon Steel Systems: lubricants,
epoxies, urethanes
• Inert Metal with EPR seals: lubricants, epoxies,
anaerobics, acrylics, light cure acrylics, epoxy
hardener, urethanes, water- based products
• Loctite® Brand Parts Supplied –
Maximum
Product
Viscosity (cP)
Additional Information
See page 77 to select appropriate
hosing, dispense valves, fluid
regulators, air filters, dispense
tips, and other accessories to
complete your Loctite® Low
Viscosity Fluid Pump System.
Loctite® Low
Viscosity Fluid Pump
Component Diagram
Number designation highlights
item type in the accessories
chart on page 77.
Automatic System
1A
6
(Secondary Pressure Regulation)
5
6
4
5
4
2B
3
3
7
2B
5
3
3
7
5
4
3
3
For additional information and the full line of equipment, visit www.equipment.loctite.com.
3
2B
Manual System
3
7
75
DISPENSING
LOCTITE® HIGH VISCOSITY PASTE PUMP SYSTEMS
The Loctite® High Viscosity Paste Pump Systems are specifically
designed to dispense paste products packaged in 5 gallon opentop pails up to 55 gallon drums. The various pump ratios are
suited for pumping medium to high viscosity paste products. The
high viscosity paste pump systems are fully assembled systems
consisting of an air motor, pump tube, and pressure ram.
Pail Pumps
Features:
• Choice of three pump and seal materials –
Carbon steel with polyurethane seals, carbon steel
with inert seals, or inert metal
• 5 gallon open - top pails or 55 gallon drum capability
• 22:1, 44:1, or 64:1 pump ratio versions
(liquid to air pressure)
Theory of Operation
These units, when configured with the necessary air and
product hoses, air and fluid regulators, dispense valves,
tips and fittings, will pump medium to high paste products
from 5 gallon open-top pails up to 55 gallon drums.
Typical Fluids Handled and Parts Supplied
• Carbon Steel Systems: lubricants, epoxies, urethanes
• Carbon Steel Systems (with inert seals):
RTV silicones, lubricants, epoxy resins,
epoxy hardeners, and urethanes
• Inert Metal Systems: lubricants, epoxies, anaerobics,
acrylics, light cure acrylics, epoxy hardeners, urethanes,
water- based products
• Loctite® Brand Parts Supplied (Highlighted in Purple in Component Diagram Below)
(1) Air Motor – 1A
(1) Single Post Primer/Follower plate –
5 gallon systems – 1D
(1) Twin Post Primer/Follower Plate –
55 gallon systems – 1C
(1) High Viscosity Pump Tube – 1B
Additional Information
Item
Number
Ratio
Output
per
Stroke
Material
Container
Maximum
Product
Viscosity (cP)
988715
22:1
6.7 in3
Carbon Steel
55 Gallon
500,000
988716
22:1
6.7 in3
Carbon Steel
5 Gallon
500,000
988717
22:1
6.7 in3
Inert Metal
55 Gallon
500,000
988718
22:1
6.7 in3
Inert Metal
5 Gallon
500,000
988843
22:1
6.7 in3
Carbon Steel w/Inert Seals
5 Gallon
500,000
988846
22:1
6.7 in3
Carbon Steel w/Inert Seals
55 Gallon
500,000
988719
44:1
6.7 in
3
Carbon Steel
55 Gallon
1,000,000
988720
44:1
6.7 in3
Carbon Steel
5 Gallon
1,000,000
988721
44:1
6.7 in3
Inert Metal
55 Gallon
1,000,000
988722
44:1
6.7 in3
Inert Metal
5 Gallon
1,000,000
988844
44:1
6.7 in3
Carbon Steel w/Inert Seals
5 Gallon
1,000,000
988847
44:1
6.7 in3
Carbon Steel w/Inert Seals
55 Gallon
1,000,000
3
988723
64:1
4.6 in
Carbon Steel
55 Gallon
4,000,000
See page 77 to select appropriate hosing, dispense valves, fluid
regulators, air filters, dispense tips, and other accessories to
complete your Loctite® High Viscosity Paste Pump System.
988724
64:1
4.6 in3
Carbon Steel
5 Gallon
4,000,000
988725
64:1
4.6 in3
Inert Metal
55 Gallon
4,000,000
988726
64:1
4.6 in3
Inert Metal
5 Gallon
4,000,000
Loctite® High Viscosity Paste Pump
Component Diagram
988845
64:1
4.6 in3
Carbon Steel w/Inert Seals
5 Gallon
4,000,000
988848
64:1
4.6 in3
Carbon Steel w/Inert Seals
55 Gallon
4,000,000
Number designation
highlights item type in the
accessories chart on page 77.
6
6
4
1A
2B
3
6
5
3
1A
3
7
6
Manual System
3
2A
6
1B
5
4
5
2B
1D
7
5
3
3
3
1B
1C
Automatic System
6
3
2A
(Secondary Pressure Regulation)
NOTES: 1. Hoses have Female JIC Swivel Fittiings on both ends. 2. ALL Fittings are stainless steel unless otherwise noted.
76
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
Loctite® Brand Pail Pump Accessories
PRODUCT
Item
Number
Description
HIGH VISCOSITY PASTE PUMP COMPONENTS
1A
4.25" Air Motor – For 22:1 Systems, 30 to 100 psi
988528
6" Air Motor – For 44:1 and 64:1 Systems, 30 to 100 psi
988530
CS Pump Tube – For 22:1 and 44:1 Systems
988532
Inert Pump Tube – For 22:1 and 44:1 Systems
988533
CS Pump Tube – For 64:1 Systems
988535
Inert Pump Tube – For 64:1 Systems
988837
CS Pump Tube with Inert Seals – For 22:1 and 44:1 Systems
988840
CS Pump Tube with Inert Seals – For 64:1 Systems
1D
988536
CS, 55 gallon Twin Post Primer
988541
Inert, 55 gallon Twin Post Primer
988539
CS, 5 gallon Single Post Primer
988542
Inert, 5 gallon Single Post Primer
4
2B
983914
625 psi
0 to 625 psi
986300
Poppet Valve
625 psi
0 to 625 psi 1/4" Tube x Bayonet Needle
982621
Poppet Valve
625 psi
0 to 625 psi
1/4" Tube x 1/8" NPT
97113
Stationary Valve
80 psi
0 to 80 psi
1/4" Tube x 1/4"-28
97114
Stationary Valve
80 psi
0 to 80 psi
3/8" Tube x 1/4"-28
98009
Light Cure Valve
70 psi
0 to 70 psi
1/8" FNPT x 1/4"-28
5,000 psi
250 to
4,500 psi
3/4" FNPT x 3/4" FNPT
989147
989148
989161
989104
High Pressure 3/4" x 12' SS, PTFE Lined – 5,000 psi max
989105
High Pressure 3/4" x 24' SS, PTFE Lined – 5,000 psi max
989106
High Pressure 1" x 6' SS, PTFE Lined – 5,000 psi max
989107
High Pressure 1" x 12' SS, PTFE Lined – 5,000 psi max
989108
High Pressure 1" x 24' SS, PTFE Lined – 5,000 psi max
989109
Medium Pressure Hose 3/8" x 6' – 2,250 psi
989110
Medium Pressure Hose 3/8" x 12' – 2,250 psi
989111
Medium Pressure Hose 3/8" x 24' – 2,250 psi
989244
989112
Medium Pressure Hose 1/2" x 6' – 2,000 psi
989245
989113
Medium Pressure Hose 1/2" x 12' – 2,000 psi
989114
Medium Pressure Hose 1/2" x 24' – 2,000 psi
989115
Medium Pressure Hose 3/4" x 6' – 1,500 psi
989116
Medium Pressure Hose 3/4" x 12' – 1,500 psi
989168
989117
Medium Pressure Hose 3/4" x 24' – 1,500 psi
989388
989118
Medium Pressure Hose 1" x 6' – 1,500 psi
989119
Medium Pressure Hose 1" x 12' – 1,500 psi
989120
Medium Pressure Hose 1" x 24' – 1,500 psi
5
3
3
3
3/4" JIC M x 3/4" MNPT Connector
989123
3/4" JIC M x 1/2" MNPT Connector
989124
1/2" JIC M x 3/4" MNPT Connector
989125
1/2" JIC M x 1/2" MNPT Connector
989126
1/2" JIC M x 1/4" MNPT Connector
989127
3/8" JIC M x 1/2" MNPT Connector
989128
3/8" JIC M x 3/8" MNPT Connector
989129
3/8" JIC M x 1/4" MNPT Connector
989130
3/8" JIC M x 3/8" MNPT Elbow
989131
1/2" JIC M x 1/4" MNPT Elbow
989132
1/2" JIC M x 1/2" MNPT Elbow
989133
3/4" JIC M x 3/4" MNPT Elbow
989134
3/4" JIC M x 1/2" MNPT Elbow
989135
1" JIC M x 3/4" MNPT Elbow
989136
3/4" FNPT x 1/4" MNPT Reducing Adapter
989137
3/4" FNPT x 1/2" MNPT Reducing Adapter
989138
1/2" FNPT x 1/8" MNPT Reducing Adapter
989139
1/2" FNPT x 1/4" MNPT Reducing Adapter
989140
3/8" FNPT x 1/8" MNPT Reducing Adapter
989141
3/8" FNPT x 1/4" MNPT Reducing Adapter
SYSTEM ACCESSORIES
988543
Pump Hoist
988545
Pump Stop
988547
55 Gallon Drum Cover
988548
5 Gallon Pail Cover
988551
Low Level Cut-off – 55 Gallon
988552
Microswitch – Low Level
988554
Wall Mount Kit for Ball Valves
4000 psi 0 to 4,000 psi
1/4" FNPT x 1/4" FNPT
3400 psi 0 to 3,400 psi
1/4" FNPT x 1/4" FNPT
1/4" Tube x 1/8" NPT
Primary Fluid Regulator
Assembly
989162
Primary Fluid Regulator
5,000 psi
989164
Gauge and Isolator Assembly
5,000 psi
989165
Secondary Fluid Regulator
Assembly
3,625 psi
250 to
3/4" FNPT x 3/4" FNPT
4,500 psi
0 to 5,000 psi 3/4" MNPT x 3/4" FNPT
0 to 725 psi
1/4" MNPT x 1/4" FNPT
989165 INCLUDES THE FOLLOWING ITEMS THAT ARE AVAILABLE INDIVIDUALLY
989076
989166
989167
Secondary Regulator
0 to 1,000 psi
Gauge and Isolator Assembly
3,625 psi
0 to 725 psi
1,000 psi
0 to 1,000 psi
Low Viscosity Fluid Pump
1,250 psi 30 to 200 psi
Regulator
Low Viscosity Fluid Pump
750 psi
5 to 30 psi
Regulator & Gauge
Particle Filter Assembly –
0 to
Includes two high pressure 5,000 psi
5,000 psi
gauge assemblies
Purge Tube Kit – For Particle Filtration
(Includes 2 isolation valves)
Mounting bracket – 989161 to 5 gallon primer
1/4" BSPP Female
1/8" MBSPP
3/8" FNPT x 3/8" FNPT
3/8" FNPT x 3/8" FNPT
3/4"FNPT x 3/4" FNPT
3/4" MNPT x 3/4"FNPT
AIR SUPPLY FILTERS AND FITTINGS
989352
Airline Filter/Regulator
150 psi
0 to 150 psi 1/8" FNPT x 1/8"FNPT
with Pressure Gauge
Fitting – 985397 to Primer 3 Way Valve
1/8" MNPT x 1/4"MNPT
FRL Air Filter Assembly –
150 psi
0 to 100 psi 1/2" FNPT x 1/2" FNPT
For Air Motor Inlet
Fitting – FRL Outlet to Air Motor Inlet
3/4" MNPT x 1/2" MNPT
989070
Fitting – FRL Inlet to External Air Supply
989170
989171
989172
989173
989174
989175
989176
989177
989178
989179
989180
989181
989193
989182
989183
989184
989185
989186
989187
989188
989189
985676
989190
989191
989192
1060662
1/4" MNPT, 1" long x 0.150" ID
1/4" MNPT, 1" long x 0.094" ID
1/4" MNPT, 1" long x 0.063" ID
1/4" MNPT, 2.5" long x 0.150" ID
1/4" MNPT, 2.5" long x 0.094" ID
1/4" MNPT, 2.5" long x 0.063" ID
1/8" MNPT, 1" long x 0.150" ID
1/8" MNPT, 1" long x 0.094" ID
1/8" MNPT, 1" long x 0.063" ID
1/8" MNPT, 2.5" long x 0.150" ID
1/8" MNPT, 2.5" long x 0.094" ID
1/8" MNPT, 2.5" long x 0.063" ID
Adapter for 1/8" MNPT Tip Nozzles, 1/8" NPS x 1/4" NPS
1.5 mm ID Tapered SS Nozzle, 1/8"-28 BSPP
2 mm ID Tapered SS Nozzle, 1/8"-28 BSPP
3 mm ID Tapered SS Nozzle, 1/8"-28 BSPP
4 mm ID Tapered SS Nozzle, 1/8"-28 BSPP
1.5 mm ID Tapered Acetal Copolymer Nozzle, 1/8"-28 BSPP
2 mm ID Tapered Acetal Copolymer Nozzle, 1/8"-28 BSPP
3 mm ID Tapered Acetal Copolymer Nozzle, 1/8"-28 BSPP
4 mm ID Tapered Acetal Copolymer Nozzle, 1/8"-28 BSPP
1.5 mm ID Tapered Aluminum Nozzle, 1/8"-28 BSPP
2 mm ID Tapered Aluminum Nozzle, 1/8"-28 BSPP
3 mm ID Tapered Aluminum Nozzle, 1/8"-28 BSPP
4 mm ID Tapered Aluminum Nozzle, 1/8"-28 BSPP
Adapter for 1/8"-28 BSPP Nozzles, 1/8" BSPP x 1/4" NPS
985397
989071
HOSE FITTINGS – Stainless Steel
989122
1/4" FNPT x 1/4" FNPT
989161 INCLUDES THE FOLLOWING ITEMS THAT ARE AVAILABLE INDIVIDUALLY
High Pressure 3/4" x 6' SS, PTFE Lined – 5,000 psi max
1" JIC M x 3/4" MNPT Connector
4000 psi 0 to 4,000 psi
FLUID PRESSURE REGULATION AND ACCESSORIES
989103
989121
Inlet/Outlet
Fitting Size
High Viscosity Valve –
Mountable
High Viscosity Hand Gun –
Pistol Grip
High Viscosity Hand Gun –
In Line
Poppet Valve
984594
SYSTEM HOSES – All Hoses have Female JIC Swivel Fittings
2A
Max. Inlet Operating
Pressure Pressure
DISPENSE VALVES
PUMP PRIMERS
1C
Description
Pail Pumps
1B
988526
Item
P R O D U C T Number
989169
6
1/4" MNPT x 1/2" MNPT
DISPENSE TIPS
7
For additional information and the full line of equipment, visit www.equipment.loctite.com.
77
DISPENSING
Monitoring Systems
Monitoring
Systems
These state -of - the - art detection systems allow real time process monitoring of dispense
cycles. Whether you’re looking to determine the presence of adhesive via fluorescence
detection, or the amount of adhesive dispensed for an individual dispense nozzle, Henkel
has the system that will get the job done with a high degree of precision and reliability.
LOCTITE® FLUORESCENCE DETECTOR
Item Number: 98083
Designed for the detection of fluorescent adhesives,
this unit connects to an in-house power supply
and PLC for monitoring of dispense processes
utilizing fluorescent adhesives and sealants.
Three interchangeable lenses are available for
various detection distances. A 100,000 hour
LED life ensures consistent and long-term
process monitoring.
Features:
• 100,000 hours LED life
• 250 microsecond maximum response
time between detection points
• 3 lens options (sold separately) allow for
various detection distances
• Common light output and fluorescence detection path
• Equipped with a learn mode feature, allowing
the programming of part detection with minimal effort
• NPN and PNP output capability, allowing easy interface
Theory of Operation
An internal Light Emitting Diode
(LED) illuminates adhesives and
sealants that contain fluorescent
additives. When adhesive is not
detected on the illuminated part,
an analog or digital signal is
transmitted to indicate an
insufficient amount. The Loctite®
Fluorescence Detector is designed
for easy interface with most
analog or PNP and NPN digital
detection systems.
TECHNICAL SPECIFICATIONS
Dimensions
3.1" L x 2.3" W x 1.2" D
Weight
0.68 lbs.
Input Voltage
10 to 30 volts DC current (80 to 300) ma
Output Voltage
Analog Output 0 to 5.5 volts into 2.2 ohms
NPN/PNP:
10 ohms pull up/down resistance
Response Time
250 microsecond maximum
Switching Frequency
2 khz
Light Source
LED 100,000 hours life
98102: 9 mm Lens 1 mm Spot
Spot Size
98103: 28 mm Lens 10 mm Spot
98101: 50 mm Lens 12 mm Spot
(1) Fluorescence Detector (Lenses Sold Separately)
(1) 4-Conductor Cable with M12 Connector
(1) Manual
Parts Included
Additional Accessories Sold Separately
98101 –
50 mm Lens
98102 –
9 mm Lens
98103 –
28 mm Lens
986091 – Loctite® 4-Conductor Cable with M12 connector
78
For additional information and the full line of equipment, visit www.equipment.loctite.com.
DISPENSING
LOCTITE® IN-LINE FLOW MONITOR
Item Number: 97211
Monitoring
Systems
The Loctite® In-Line Flow Monitor (item 97211), when integrated with the
Loctite® Single Channel Automatic Controller (item 97123), provides an
economical, yet effective, approach to adhesive dispense monitoring. Pressure
changes due to air entrapment, broken or blocked nozzles, or substrate contact
can be effectively monitored by the system with a high degree of accuracy and
repeatability. All out of tolerance dispense cycles result in error messages being
displayed on the controller display.
Features: (When integrated with the Loctite® Single Channel Controller – 97123)
Effective dispense monitoring to detect:
•
•
•
•
Air bubbles
Clogged or broken dispense tips, or tip - substrate contact
Changes in amount of adhesive dispensed
3 pre - set dispense tolerances or
customizable from 1 to 99%
• PLC or PC integration to provide SPC data analysis
TECHNICAL SPECIFICATIONS
Power Input
24 VDC
Power Output
1 to 10 VDC
Dimensions
3" W x 5.5" H x 2.25" D
Weight
0.5 lbs.
Additional Accessories Sold Separately
Required System Components Sold Separately
97123 – Loctite® Single Channel
Automatic Controller
98009 –
Loctite® Light
Cure Dispense
Valve
Provides dispense control and
tolerance monitoring
97295 – Valve Adapter
Valve body adapter for Loctite® dispense valves
(Item Numbers 97113 / 97114)
97200 – Valve Adapter
Valve body adapter for Loctite® dispense valves
(Item Numbers 98009 / 98013)
8965008 – Sensor and Cable
Pressure sensor and cable for dispense valve interface
98013 –
Loctite®
Cyanoacrylate
Dispense Valve
982726 / 982727–
Loctite® Bond-A-Matic®
Reservoirs
97113 / 97114 –
Loctite®
Stationary
Applicator Valves
982720 / 982723 –
Loctite® Bond-A-Matic®
Reservoirs with
Low Level Sensors
LOCTITE® FLUID WAVEFORM ANALYZER, SIGNATURE SERIES Custom Equipment
Loctite® Fluid Waveform Analyzers are state - of - the - art fluid detection systems for use where high quality production and data
inspection are desired. Available through the custom equipment group of Henkel, these dispense inspection systems use conclusive
“real time” data acquisition to detect plugged and broken dispense nozzles, nozzle voids, no dispense, low pressure (under- sized
beads), high pressure (over- sized beads), and air bubbles. The resulting output is a pressure waveform, which when compared to a
pre -programmed standard waveform, determines whether the process is in or out of control. Data acquisition can be stored locally
or to a LAN. The custom configured fluid waveform analyzers are available in a range of price and performance options to meet
your specific dispensing process requirements.
LOCTITE® SIGNATURE SERIES 1
Series 1 Features:
Designed to monitor a single dispense point, the Loctite®
Signature Series 1 is ideal for analyzing “drop” and Rotospray
dispense cycles up to 3 seconds. Includes one dry - contact
pass/ fail output relay. An optional remote display monitor is
available separately. Not capable of internal data storage.
Detection of:
•
•
•
•
•
Plugged and broken dispense tips
Dispense tip voids
No dispense
Low pressure – under- sized beads
High pressure – over- sized beads
LOCTITE® SIGNATURE SERIES 4
Designed to monitor 1 to 4 dispense points simultaneously,
the Loctite® Signature Series 4 is ideal for analyzing bead or
drop dispense cycles up to 40 seconds. This ethernet - ready,
industrial PC - based system comes standard with a hard
drive for data storage. Capable of saving multiple dispense
profiles, and can perform SPC analysis on data acquired.
Types of Fluids Handled
Series 4 Features:
Full detection of Series 1 plus:
•
•
•
•
Air bubbles
Testing and data acquisition flexibility
Mathematical processing
Statistical data analysis and
reporting using LAN & SQL technology
• Database archiving and network support
Any fluids ranging from water- thin liquids to thick pastes.
Availability
Loctite® Fluid Waveform Analyzers are available through our Custom Equipment Group in a range
of price and performance options, custom configured to meet your specific requirements.
For more information, contact the Technical Information Department at 1-800-LOCTITE (562 -8483).
For additional information and the full line of equipment, visit www.equipment.loctite.com.
79
CONSUMABLES
Consumables –
Dispense
Accessories
Henkel offers a comprehensive line of Loctite® brand dispense tips, static mix nozzles, and syringe
barrel components. Our high precision stainless steel, tapered polyethylene and flexible polypropylene
tips all feature a positive locking, helical thread design to ensure the tip will stay intact during the
toughest applications. A wide variety of static mix nozzles are available to meet your two part
adhesive dispensing needs. High quality syringe barrels and components will ensure consistent
single component adhesive dispensing needs are met.
Dispense Accessories
High Precision Stainless Steel Dispense Tips
11⁄ 2" STAINLESS STEEL TIPS HELICAL THREAD
1
⁄4" STAINLESS STEEL TIPS HELICAL THREAD
50 pack
1000 pack
Item Number Item Number
Hub Color
Gauge
Hub Color
Gauge
830740
830703
Olive
14
98163
98164
White
14
98196
98197
Green
18
98165
98166
Amber
15
98198
98199
Pink
20
98167
98168
Green
18
98200
98201
Purple
21
98169
98170
Pink
20
98624
98625
Red
25
98171
98172
Purple
21
98626
98627
Clear
27
98173
98174
Blue
22
98628
98629
Lavender
30
98175
98176
Orange
23
98114
98115
Yellow
32
98177
98178
Red
25
98179
98180
Light Grey
27
1
45° BY 1⁄ 2" STAINLESS STEEL TIPS HELICAL THREAD
⁄ 2" STAINLESS STEEL TIPS HELICAL THREAD
50 pack
1000 pack
Item Number Item Number
Hub Color
Gauge
50 pack
1000 pack
Item Number Item Number
Hub Color
Gauge
98396
98397
Amber
15
98236
98237
White
14
98398
98399
Green
18
98240
98241
Amber
15
98400
98401
Pink
20
98244
98245
Green
18
98424
98425
Purple
21
98248
98249
Pink
20
98402
98403
Blue
22
98252
98253
Purple
21
98611
98612
Orange
23
98256
98257
Blue
22
98404
98405
Red
25
98260
98261
Orange
23
98104
98105
Lavender
30
98264
98265
Red
25
98268
98269
Light Grey
27
90° BY 1⁄ 2" STAINLESS STEEL TIPS HELICAL THREAD
1" STAINLESS STEEL TIPS HELICAL THREAD
50 pack
1000 pack
Item Number Item Number
80
50 pack
1000 pack
Item Number Item Number
Hub Color
Gauge
50 pack
Item Number
1000 pack
Item Number
Hub Color
Gauge
98216
98217
White
14
98238
98239
White
14
98218
98219
Amber
15
98242
98243
Amber
15
98222
98223
Green
18
98246
98247
Green
18
98224
98225
Pink
20
98250
98251
Pink
20
98226
98227
Purple
21
98254
98255
Purple
21
98228
98229
Blue
22
98258
98259
Blue
22
98230
98231
Orange
23
98262
98263
Orange
23
98232
98233
Red
25
98266
98267
Red
25
98234
98235
Light Grey
27
98270
98271
Light Grey
27
For additional information and the full line of equipment, visit www.equipment.loctite.com.
General Purpose Dispense Tips
1
⁄2" STAINLESS STEEL TIPS
THREAD AND UV LIGHT BLOCK ADDITIVE
50 pack Item Number 1000 pack Item Number
Hub Color
Gauge
Hub Color
Gauge
50 pack Item Number 1000 pack Item Number
98208
98209
Olive
14
98385
98386
White
14
97225
98065
Amber
15
98387
98388
Grey
16
97226
98066
Green
18
98389
98390
Green
18
97227
98067
Pink
20
98391
98392
Pink
20
98210
98211
Purple
21
98393
98394
Blue
22
98100
98080
Blue
22
98658*
98659*
Red
25
98212
98213
Orange
23
98660*
98661*
Clear
27
97228
98068
Red
25
98214
98215
Clear
27
* New smaller gauge sizes.
General Purpose Tapered Dispense Tips
11⁄4" POLYETHYLENE TAPERED TIPS
Flexible Dispense Tips
11⁄ 2" POLYPROPYLENE TIPS HELICAL THREAD
50 pack Item Number 1000 pack Item Number
Hub Color
Dispense
Accessories
NEW
CONSUMABLES
Tapered Dispense Tips
11⁄4" POLYETHYLENE TAPERED TIPS HELICAL
50 pack Item Number 1000 pack Item Number
Gauge
Hub Color
Gauge
98273
Tan
14
97229
98069
Amber
15
98272
97230
98070
Green
18
97221
98061
Grey
16
97231
98071
Pink
20
97222
98062
Green
18
97232
98082
Red
25
97223
98063
Pink
20
97224
98064
Blue
22
Additional Dispense Tips and Accessories
PRODUCT
LOCTITE SHOWCASE
NEEDLE VARIETY KIT
®
Item Numbers
Description
97238 / 98073
SS, PTFE Lined, 25 Gauge (50/1000 pack)
97233
Luer-Lok® Adapter Kit, 20 Luer-Loks®
and 5 adapters
97248 / 98499
Tip caps (50/1000 pack)
97261 / 98074
High Density Polyethylene, 15 Gauge,
White (50/1000 pack)
97262
2 each of a variety of Helical Threaded
1⁄2" Stainless Steel, Tapered Tip, and
Polypropylene tips
98637
Formable Dispense Tip, 21 Gauge
(100 pack)
97511
Tri-Nozzle – Helps eliminate bubbles in
anaerobic gasket applications
98652
Light blocking shield for
dispense tips (10 pack)
998390
Vari-Drop™ Applicator Brushes (10 pack)
Item Number: 98439
This kit contains 5 each of an
assortment of high precision
Stainless Steel tips in various
lengths and gauges. Tapered
and Flexible Dispense Tips are
also included. All dispense tips
have helical thread Luer- Lok®
hubs for reliable locking.
Cartridge Accessories
PRODUCT
Item #
Description
98446
Roller Assembly 1" wide band
98448
Roller Assembly 2" wide band
98447
Replacement Rollers 1" wide (3 pack)
98449
Replacement Rollers 2" wide (3 pack)
98610
3⁄ 4"
wide x
3⁄ 8"
PRODUCT
NPT Dispense nozzle (10 pack)
Item #
Description
97215
Cartrige-Syringe Adapter: 1⁄ 4" Semco
Thread x Female Luer. Used for downloading
98181
984832
984833
Cartridge-Tube Fitting Adapter: (1⁄ 4" FNPT x 1⁄ 4" male
Semco Thread) Used for connecting tube fittings
to cartridges (984832 or 984833 also required
and sold separately) (3 pack)
Tube Fitting:
1⁄ 4" male NPT x 1⁄ 4" feed tube (10 pack)
Tube Fitting:
1⁄ 4" male NPT x 3⁄ 8" feed tube (10 pack)
1044246
Aero Nozzle for Silicones in aerosol cans
(10 pack)
982644
Cartridge Adapter: SS, (1⁄ 4" FNPT x 1⁄ 4" female
Fischbach Thread), used for connecting tube fittings
98128
Cartridge Dispense Tip: 1⁄ 4" male Semco Thread
(10 pack)
1045339
Cartridge-Needle Adapter: 1⁄ 4" NPT Thread x
Female Luer - shown with 982644 for 1⁄ 4"
Fischbach. For needle attachment ( 5 pack)
98371
Cartridge-Needle Adapter: (Female
Luer x 1⁄ 4" male Semco Thread) Luer-Lok®
adapter for dispense needle attachment (5 pk)
1044247
Cartridge-Syringe Adapter: 1⁄ 4" MNPT x Female
Luer. shown with 982644 for 1⁄ 4" Fischbach.
Used for downloading (5 pack)
For additional information and the full line of equipment, visit www.equipment.loctite.com.
81
CONSUMABLES
Loctite® Brand Static Mix Nozzles and Accessories
Dispense
Accessories
PRODUCT
82
Item
Numbers
Package
Quantity
98444
98365
10
1,000
50 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 3.25" Overall Length,
5.3 mm 2, 16 elements, 1:1, 2:1 mix ratios.
98473
98632
10
1,000
50 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 4.5" Overall Length,
5.3 mm 2, 24 elements, 1:1, 2:1, 4:1 mix ratios.
98622
983509
10
2,000
50 ml Mix Nozzle, 5.9" Overall Length, 0.250" ID,
Slip-Luer, 20 elements, 1:1, 2:1 and 4:1 ratios.
98623
98364
10
2,000
50 ml Mix Nozzle, 5.9" Overall Length, 0.250" ID,
Stepped Tip-Luer, 20 elements, 1:1, 2:1 and 4:1 ratios.
98454
10
98455
98462
10
4,000
50 ml Mix Nozzle, Stepped Tip, 6.0" Overall Length, 6.0 mm diameter,
21 elements, 1:1, 2:1, 4:1 mix ratios.
98463
583804
10
1,000
50 ml Mix Nozzle, Stepped Tip, Keyed, 5.9" Overall Length, 5.4 mm diameter,
28 elements, 10:1 mix ratio.
1034575
10
98373
98374
10
1,000
200/400 ml Square Mix Nozzle, Luer/Stepped Combo Tip, 5.0" Overall Length,
5.3 mm 2, 24 elements, 1:1, 2:1, 4:1 mix ratios.
98474
98653
10
1,000
200/400 ml Square Mix Nozzle, Stepped Tip, 5.1" Overall Length, 7.5 mm 2,
24 elements, 1:1, 2:1 mix ratios.
98667
98668
10
500
98456
1053262
10
2,000
200/400 ml Mix Nozzle, Stepped Tip, 7.3" Overall Length, 6.3 mm diameter,
24 elements, 1:1, 2:1 mix ratios.
98457
98464
10
1,500
200/400 ml Mix Nozzle, Stepped Tip, 8.8" Overall Length, 8 mm diameter,
24 elements, 1:1, 2:1 mix ratios.
98459
10
200/400 ml Mix Nozzle, Stepped Tip, 10.9" Overall Length, 10 mm diameter,
24 elements, 1:1, 2:1 mix ratios.
989516
50
200/400 ml Mix Nozzle, 7.4" Overall Length, 0.188" ID, Stepped Tip,
32 Elements, 1:1, 2:1 and 4:1 ratios.
989518
10
200/400 ml Mix Nozzle, 9.0" Overall Length, 0.188" ID, Stepped Tip,
48 Elements, 1:1, 2:1 and 4:1 ratios.
918088
10
200/400 ml Mix Nozzle, Luer Tip, 9.5" Overall Length, 0.25" ID, Slip Luer,
32 Elements, 1:1 and 2:1 ratios.
1032026
1032028
10
1,000
98460
10
98461
98409
10
1,000
98672
98430
10
500
98458
970655
10
2,000
98344
10
Ribbon Tip Adapter, allows Ribbon Tip use with 10 mm.
Mix Nozzles 98461, 98459 and 98409, sold separately.
98467
10
200/400 ml Snap Tip Mix Nozzle, 8.9" overall length, 8 mm diameter.
24 elements, 1:1, 2:1 mix ratios. For use with Ribbon Tips.
98469
98367
10
1,000
200/400 ml Snap Tip Mix Nozzle, 9.3" overall length, 9.3 mm diameter.,
24 elements, 1:1, 2:1 mix ratios. For use with Ribbon Tips.
98470
See
description
Snap Tip Mix Nozzle and Ribbon Tip Sample Kit.
Contains: 6 pieces each of: 12, 25, and 43 mm Ribbon Tips
3 pieces each of: 8 and 9.3 mm diameter Snap Tip Mix Nozzles
98476
98410
10
500
12 mm Ribbon Tip. Sold Separately.
98477
98411
10
500
25 mm Ribbon Tip. Sold Separately.
98478
98412
10
500
43 mm Ribbon Tip. Sold Separately.
Description
50 ml Mix Nozzle, Luer Tip, 6.0" Overall Length, 6.0 mm diameter,
21 elements, 1:1, 2:1, 4:1 mix ratios.
50 ml-S Mix Nozzle, Stepped Tip, 6.2" Overall Length, 6.5 mm ID,
20 elements, 10:1-S cartridges only
200/400 ml Square Mix Nozzle, Threaded Bell End 10.7 mm square,
187 mm Overall Length, 24 elements, 1:1, 2:1 ratios.
200/400 ml Mix Nozzle, 11.44" Overall Length, 8 mm diameter,
32 elements, 1:1, 2:1 mix ratios.
200/400 ml Mix Nozzle, Stepped Tip, Keyed, 9.1" Overall Length, 8 mm diameter,
24 elements, 1:1, 2:1 ratios.
200/400 ml Mix Nozzle, Stepped Tip, Keyed, 10.8" Overall Length, 10 mm diameter,
24 elements, 4:1, 10:1 mix ratios.
200/400 ml Mix Nozzle, Stepped Tip, 14.2" Overall Length, 9.3 mm diameter,
40 elements, 1:1, 2:1 mix ratios.
Luer-Lok® Adapter for 6.3 and 8 mm Stepped Tip Mix Nozzles, Allows for Dispense
Needle Attachment, (10 pack). Mix Nozzles and Dispense Needles sold separately.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
CONSUMABLES
Loctite® Brand Syringe Accessories
PRODUCT
Description
98656
98657
97208
97245
3 ml Syringe Air Line Adapter
5 ml Syringe Air Line Adapter
10 ml Syringe Air Line Adapter
30 ml and 55 ml Syringe Air Line Adapter
97216
10 ml Syringe Starter Kit
Contents
2 Air Line Adapters –
Common to all part numbers
(syringe barrel sold separately)
5 Caps
5 Pistons
4 Clear Barrels
1 Black Barrel
5 Tips
1 Air Line Adapter
97294
30 ml Syringe Starter Kit
98416
55 ml Syringe Starter Kit
97207
10 ml Clear Syringe Barrel Kit
20 Barrel Caps, 40 Pistons, 40 Barrels,
40 Barrel Tips
97244
30 ml Clear Syringe Barrel Kit
10 Barrel Caps, 20 Pistons, 20 Barrels,
20 Barrel Tips
98314
55 ml Clear Syringe Barrel Kit
5 Barrel Caps, 10 Pistons, 10 Barrels,
10 Barrel Tips
97263
10 ml Black Syringe Barrel Kit
for UV Adhesives
20 Barrel Caps, 40 Pistons, 40 Barrels,
40 Barrel Tips
97264
30 ml Black Syringe Barrel Kit
for UV Adhesives
10 Barrel Caps, 20 Pistons, 20 Barrels,
20 Barrel Tips
98315
55 ml Black Syringe Barrel Kit
for UV Adhesives
5 Barrel Caps, 10 Pistons, 10 Barrels,
10 Barrel Tips
Various
Clear or Black
3, 5, 10, 30, and 55 ml Piston/Syringe
Combination Packages
See page 85 for syringe and piston
options and item numbers.
Various
Dark Amber Syringe and Piston options
Available upon request. Please contact your
Loctite® Sales Representative or contact us at
www.equipment.loctite.com.
984650
Air Line Filter for Syringe Dispensing to
prevent product back flow
1 Filter Assembly with 2 Hose Crimps
984625
Loctite® Vertical Syringe Stand for
10 ml and 30 ml syringe barrels
(Black)
1 Stand
(syringe barrel and air line adapter
sold separately)
98501
Loctite® Applicator Holder for
10 ml, 30 ml and 55 ml syringe barrels
(Red)
1 Holder
(syringe barrel and air line adapter
sold separately)
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Dispense
Accessories
Item
Numbers
83
®
LOCTITE
BRAND DISPENSING
Dispense
SPARE
PARTS AND ACCESSORIES
Accessories
PARENT PRODUCT
Description
Package Quantity
39635 – Loctite® Fixmaster® Rapid Rubber Repair Dispenser
39633
400 ml mix nozzle, stepped 8 mm end
6
97001 – Loctite® Hand Pump, 250 ml
993163
993174
Replacement tubing
Replacement nozzle
1
1
97006 – Loctite® Digital Syringe Dispensing System
883976 – Loctite® Digital Syringe Dispensing System
97201
902521
98501
982520
Replacement foot switch for 97006
Replacement foot switch
Applicator holder
Universal power cord
1
1
1
1
97007 – Loctite® Integrated Semi-Automatic Controller Dispenser 0-100 psi
97010 – Loctite® Integrated Semi-Automatic Controller Dispenser 0-15 psi
97017 – Loctite® Integrated Semi-Automatic Controller Disp. with Low Level Sensor 0-100 psi
97020 – Loctite® Integrated Semi-Automatic Controller Disp. with Low Level Sensor 0-15 psi
97251
8900064
8950210
Replacement rupture disc
Tank feed line fitting
Replacement reservoir lid o-ring
1
1
1
97111 – Loctite® Hand Held Applicator, Manual
97112 – Loctite® Hand Held Applicator, Pneumatic, Foot
97116 – Loctite® Hand Held Applicator, Pneumatic, Finger Switch
97220
97233
97234
97235
97236
97999
3/8" feed line conversion kit
Luer-Lok® adapter kit
Replacement finger lever for 97111
Replacement actuator for 97112
Replacement actuator for 97116
Replacement valve assembly, all applicators
97113 – Loctite® Stationary Applicator Valve with 1/4" Feed Line
97114 – Loctite® Stationary Applicator Valve with 3/8" Feed Line
97239
97240
97242
97291
Replacement shut-off valve assembly for 97113
Replacement shut-off valve assembly for 97114
Mounting bracket
Replacement actuator assembly
1
1
1
Air filter and regulator
Pneumatic tubing, 4 mm OD, 33 ft.
Pneumatic tubing, 6 mm OD
Threaded fitting for pneumatic supply and reservoir
Threaded fitting dispensing valves and advancing slide
1
1
1
1
1
97123 – Loctite® Single Channel Automatic Controller
97120
97960
97973
8950450
8951124
1
20 Luer-Lok®, 5 adapters
1
1
1
1
97130 – Loctite® LV Hand Held Applicator
97902
Repair Kit for LV hand held valve
N/A
97132 – Loctite® Vari-Drop™ Applicator, without Tubing
97249
998390
Vari-Drop™ applicator repair kit
Vari-Drop™ applicator brushes
1
10
97135 – Loctite® Diaphragm Valve with 1⁄ 4" Feed Line
97136 – Loctite® Diaphragm Valve with 3⁄ 8" Feed Line
97254
97268
97269
97271
Diaphragm valve – actuator replacement
Diaphragm valve – shut-off – 2 mm replacement
Diaphragm Valve – shut-off – 3 mm replacement
Diaphragm replacement kit
1
1
1
10
98009 – Loctite® Light Cure Dispense Valve
98013 – Loctite® Cyanoacrylate Dispense Valve
985281
984684
984685
Mounting bracket
Valve rebuild kit – 98009
Valve rebuild kit – 98013
1
1
1
98011 – Loctite® Hysol™ Reactive Urethane Cartridge Dispenser
984280
984281
Pneumatic foot switch
Vertical stand
1
1
984826
984832
984833
–
Various
Replacement sleeve kit
Fitting: 1/4" NPT x 1/4" tube, black plastic
Fitting: 1/4" NPT x 3/8" tube, black plastic
See Cartridge Accessories
See additional Cartridge Accessories - page 81
98022 – Loctite® 300 ml Cartridge Pusher
97101 – Loctite® Digital Dispense Controller
84
Accessory
Item Numbers
1
10
10
–
Various
97201
Replacement foot switch assembly
1
1022006 – Loctite® Digital Multi-Functional Controller
984691
97201
1044248
Advancing slide (2" stroke)
Replacement foot switch assembly
2-Hand anti-tie-down switch set
1
1
1
98079 – Loctite® Shot Miser ™ Valve Controller
98126
986264
Foot pedal with fitting and tubing
Solenoid valve, 4 way
1
1
98084 – Loctite® Micro Needle Valve
98091
Micro needle valve rod replacement kit
N/A
98085 – Loctite® Shot Miser ™ Dispense Valve
97132
97249
993247
997569
Vari-Drop™ without tubing and guards
Vari-Drop™ repair kit
Nut and sleeve sub-assembly
Silicone grease, 6 gram tube
1
1
1
1
98090 – Loctite® Shot Miser ™ Reservoir, 1 Liter
98094
98129
98130
983055
984687
992641
997312
Toggle valve – 3 way
Pressure regulator
Pressure gauge
Reservoir lid o-ring for acetone based primers
Anti-bubbler kit
Pressure safety relief valve
Replacement reservoir lid o-ring
1
1
1
1
2
1
1
98359 – Loctite® 2.25 Gallon Pressure Reservoir
98360
98361
98362
98363
98375
Pressure safety relief valve
Pressure regulator
Pressure gauge
Reservoir lid gasket; material: Buna N
Reservoir lid gasket; material: EPR
1
1
1
1
1
98378 – Loctite® Posi-Link™ 5-25 Actuator
989753
989754
989755
Loctite® 5-25, 5 ml Barbed Piston
Loctite® 5-25, 10 ml Barbed Piston
Loctite® 5-25, 25 ml Barbed Piston
1
1
1
98379 – Loctite® Posi-Link™ 10-50 Actuator
989751
989752
Loctite® 10-50, 10 ml Barbed Piston
Loctite® 10-50, 25 ml Barbed Piston
1
1
98641 – Loctite® Posi-Link™ 10-50, 50 ml Dual Cartridge Nest
989748
Cartridge cradle
2
98380 – Loctite® Posi-Link™ 200-400 Actuator
97141
Static mixer pinch valve
1
Description
Package Quantity
98520 – Loctite® Spray Valve
989268
989269
989270
989271
989272
989273
Spray nozzle kit – 0.014 diameter
Spray nozzle kit – 0.028 diameter
Spray nozzle kit – 0.046 diameter
Spray valve seal kit
Spray valve hose and fitting kit
Spray valve – piston repair kit
98548 – Loctite® Benchtop Peristaltic Dispenser
869401
869402
910276
936680
936701
936702
937394
941765
989937
989402
989403
989404
989400
989401
Feed line tubing 2.0 mm OD x 1.4 mm ID, clear
Feed line tubing 1.6 mm OD x 1.0 mm ID, clear
Feed line tubing 1.6 mm OD x 1.0 mm ID, black
Feed line tubing 2.0 mm OD x 1.4 mm ID, black
Feed line tubing 3.0 mm OD x 1.9 mm ID, clear
Feed line tubing 3.0 mm OD x 2.4 mm ID, clear
Feed line tubing 3.0 mm OD x 2.4 mm ID, black
Feed line tubing 2.5 mm OD x 1.9 mm ID, black
Applicator nozzle – 1.2 mm ID
Applicator nozzle – 1.4 mm ID
Applicator nozzle – 1.9 mm ID
Applicator nozzle – 2.4 mm ID
Applicator assembly 989400
Pump head
982719 – Loctite® Bond-A-Matic® 3000 Dispenser, 0-15 psi
982722 – Loctite® Bond-A-Matic® 3000 Dispenser, 0-100 psi
97132
97249
981880
982450
Vari-Drop™ applicator
Vari-Drop™ applicator repair kit
Reservoir lid o-ring
200 g gel tube kit
1
1
1
1
982720 – Loctite® Bond-A-Matic® 3000 Reservoir, 0-15 psi with Low Level Sensor DC
982721 – Loctite® Bond-A-Matic® 3000 Reservoir, 0-15 psi with Low Level Sensor AC
982723 – Loctite® Bond-A-Matic® 3000 Reservoir, 0-100 psi with Low Level Sensor DC
982724 – Loctite® Bond-A-Matic® 3000 Reservoir, 0-100 psi with Low Level Sensor AC
982726 – Loctite® Bond-A-Matic® 3000 Reservoir, 0-15 psi, No Applicator
982727 – Loctite® Bond-A-Matic® 3000 Reservoir, 0-100 psi, No Applicator
981880
982450
982716
982732
Replacement reservoir lid o-ring
200 g gel tube kit
Replacement 110 VAC sensor, 982721, 982724 only
Replacement 24 VDC sensor, 982720, 982723 only
1
1
1
1
982732
982881
983116
983117
983255
986025
986035
986060
986300
986025
986035
986060
986301
983095
998402
998425
998426
24 VDC sensor
Replacement reservoir body
Replacement actuator assembly
Replacement pump assembly
Pump replacement
Nozzle: 0.025" diameter
Nozzle: 0.035" diameter
Nozzle: 0.060" diameter
Replacement poppet valve
Nozzle: 0.025" diameter
Nozzle: 0.035" diameter
Nozzle: 0.060" diameter
Valve rebuild kit
Tube adapter
Pump rebuild kit
Replacement turret
Replacement cap – 1 liter bottle
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Syringe Barrel
and Piston
98479
98480
98481
98482
98483
98484
98485
98486
98487
98488
98489
98490
98491
98492
98493
98494
98495
98496
98497
98498
3 ml syringe barrel and piston, natural
3 ml syringe barrel and piston, natural
3 ml syringe barrel and piston, black
3 ml syringe barrel and piston, black
5 ml syringe barrel and piston, natural
5 ml syringe barrel and piston, natural
5 ml syringe barrel and piston, black
5 ml syringe barrel and piston, black
10 ml syringe barrel and piston, natural
10 ml syringe barrel and piston, natural
10 ml syringe barrel and piston, black
10 ml syringe barrel and piston, black
30 ml syringe barrel and piston, natural
30 ml syringe barrel and piston, natural
30 ml syringe barrel and piston, black
30 ml syringe barrel and piston, black
55 ml syringe barrel and piston, natural
55 ml syringe barrel and piston, natural
55 ml syringe barrel and piston, black
55 ml syringe barrel and piston, black
50
1,000
50
1,000
50
1,000
50
1,000
50
1,000
50
1,000
50
500
50
500
250
50
50
250
Syringe Barrel
Only
98655
98557
98576
98559
98578
98561
98122
98563
98581
98565
3 ml syringe barrel, black
3 ml syringe barrel, natural
5 ml syringe barrel, black
5 ml syringe barrel, natural
10 ml syringe barrel, black
10 ml syringe barrel, natural
30 ml syringe barrel, black
30 ml syringe barrel, natural
55 ml syringe barrel, black
55 ml syringe barrel, natural
1,000
1,000
1,000
1,000
1,000
1,000
500
500
250
250
Pistons Only
98125
98584
98127
98587
3 ml syringe piston
5 ml syringe piston
10 ml syringe piston
30 / 55 ml piston
1,000
1,000
1,000
1,000
982880 – Loctite® 4 Liter Gravity Feed Reservoir
983330 – Loctite® Positive Displacement Pump
986000 – Loctite® Pump-A-Bead™ II Dispenser
983914 – Loctite® Poppet Valve, Acetal Copolymer Body
986300 – Loctite® Poppet Valve, Acetal Copolymer Body
998400 – Loctite® Dial-A-Seal® Applicator
Loctite® Syringe Barrel and Piston Kits
(Dark Amber Syringes are also available in the
same packages. Call 860-571-5174 for special orders.)
Loctite® Tubing
97970
97972
981821
981866
981994
984688
3⁄ 8"
black PTFE lined feed tube
black PTFE lined feed tube
clear polyethylene feed tube
3⁄ 8" clear polyethylene feed tube
1⁄ 4" clear nylon feed tube for Pump-A-Bead ™
Silicone tubing for dispense valve purging (10 pack)
1⁄ 4"
1⁄ 4"
LOCTITE® BRAND DISPENSING
Dispense
SPARE PARTS AND ACCESSORIES
Accessories
Accessory
Item Numbers
PARENT PRODUCT
1
1
1
1
1
1
1 x 65.6'
1 x 65.6'
1 x 65.6'
1 x 65.6'
1 x 65.6'
1 x 65.6'
1 x 65.6'
1 x 65.6'
1
1
1
1
1
1
33 feet
33 feet
33 feet
33 feet
33 feet
1 foot
85
MOTION
CONTROL
Robot Dispense
Systems
Motion Control
Robot Dispense Systems
Available in both Benchtop and SCARA model types, Loctite® brand robots are designed to
simplify the dispensing of adhesives and sealants onto complex surface configurations. They
allow manufacturers to repeatedly and reliably dispense patterns of liquid material on a
programmed basis, resulting in improved process efficiencies, minimal material waste, and
reduced manufacturing costs.
Robot Types
Benchtop robots are beam or gantry style robots designed to be placed on a bench. These robots carry one
or more parts that are captured in a fixture that is mounted on the work surface. Motion in the X axis is
achieved by moving the work surface forward and backward. The Y and Z axes are achieved by moving the
tool head left and right and up and down, respectively, on the beam or gantry. When applicable, the 4th axis
(R axis) is achieved by rotating the mounting shaft that protrudes from the tool head.
SCARA is an acronym for Selective Compliance Assembly Robot Arm. The robot is a multi - jointed arm that
moves above the work surface. It must be mounted near the work surface by the user. The X and Y axes are
achieved by changing the angles of the two arms. This creates a kidney shaped dispensing area that is
approximately 880 mm (34.6") wide and 440 mm (17. 3") tall at the center. The Z axis is achieved by moving
both arms up and down. On the 4 axis models, the R axis is achieved
by rotating the mounting shaft that
protrudes from the end of the arm.
For detailed dimension drawings of all
benchtop robots, please visit the web at:
Just search on the part number you are interested
in and scroll down to the product documentation.
PRODUCT
Loctite® 200 Benchtop
Robot Station
Loctite® 300 Benchtop
Robot Station
Loctite® 400 Benchtop
Robot Station
Type
Benchtop
Benchtop
Benchtop
Benchtop
SCARA
3 or 4
3 or 4
3 or 4
3 or 4
3 or 4
X axis
200 mm
300 mm
400 mm
510 mm
Arm 1: 260 mm ± 90°
Y axis
200 mm
320 mm
400 mm
510 mm
Arm 2: 180 mm ± 150°
Z axis
50 mm
100 mm
150 mm
150 mm
100 mm
R axis
± 360°
± 360°
± 360°
± 360°
± 360°
7.0 kg
11.0 kg
11.0 kg
11.0 kg
N/A
3.5 kg
6.0 kg
6.0 kg
6.0 kg
5.0 kg
Number of
controllable axes
Range of
operation
Work
Portable
Surface
weight
limitations Tool Head
Speed
86
Loctite® 500 Benchtop Loctite® S440 SCARA-N
Robot Station
Robot Station
PTP (X, Y)
5 to 700 mm/s
8 to 800 mm/s
8 to 800 mm/s
8 to 800 mm/s
15 to 1500 mm/s
PTP (Z)
5 to 250 mm/s
3.2 to 320 mm/s
3.2 to 320 mm/s
3.2 to 320 mm/s
3.2 to 320 mm/s
PTP (R)
6 to 600 °/s
8 to 800 °/s
8 to 800 °/s
8 to 800 °/s
10 to 1,000 °/s
CP (X, Y, Z)
0.1 to 500 mm/s
0.1 to 800 mm/s
0.1 to 800 mm/s
0.1 to 800 mm/s
0.1 to 800 mm/s
For additional information and the full line of equipment, visit www.equipment.loctite.com.
MOTION
CONTROL
LOCTITE® 200 BENCHTOP ROBOT STATION
The Loctite® 200 Series Benchtop Robot has a 200 by 200 mm range of operation. Eight different configurations,
as shown in the chart, are available to meet your process requirements. This unit is fully compliant
with RIA (Robotics Industry Association) safety guidelines. Programming accessories,
dispensing equipment, integration cables and mounting hardware are sold separately.
Item Number
98279A
98280A
98281A
98282A
98283A
98284A
98285A
98286A
Robot Dispense
Systems
Robot Configurations
Description
200 x 200 mm, 3 axis, 110 V
200 x 200 mm, 3 axis, 110 V CE Rated
200 x 200 mm, 3 axis, 220 V
200 x 200 mm, 3 axis, 220 V CE Rated
200 x 200 mm, 4 axis, 110 V
200 x 200 mm, 4 axis, 110 V CE Rated
200 x 200 mm, 4 axis, 220 V
200 x 200 mm, 4 axis, 220 V CE Rated
Features:
•
•
•
•
•
•
•
Integrated solution – plug and play
Low cost operation and ownership
Compact size
Application specific software
Teach point programming
255 program, 30,000 point memory card
A wide variety of mounting hardware is available, see page 95.
Programming
TECHNICAL SPECIFICATIONS
Simple to program using either a multi- line backlit teach
pendant with user- friendly prompts or Windows® XP software.
The program allows for continuous path motion and
automatically interpolates any line or arc in all axes.
The manual provides step - by - step instructions for
programming the robot. No previous experience is required.
Programming Accessories
989656 – LR- C Teach Point Software
Integration Accessories
Loctite® brand cables and junction boxes provide plug and
play integration solutions for a variety of Loctite® dispensing
systems. Single or multiple systems functionality can be
easily accommodated.
98395 – Interface Cable – Benchtop Robots, 37 pin male D x multi.
Use with all Loctite® Robot single dispenser integration.
Integrates Loctite® Precision Syringe Dispenser (97006),
Digital Syringe Dispenser (883976), Spray Controller (98521),
Integrated Semi- Auto Controllers (97007, 97010, 97017,
97020), Benchtop Peristaltic Dispenser (98548),
and Posi-Link™ Controller (98377).
98549 – Robot Interface Junction Box. Provides convenient
connection point between robots and up to 12 external
devices including all Loctite® dispensers, UV Wands, LED
cure systems, and 3rd party solenoids, grippers, etc. The
Junction Box accepts up to 7 inputs and 5 outputs, device
status indicator lights with a view window, and a 500
ma/24 VDC power supply for powering 3rd party devices.
Connection of the Junction Box to the Benchtop Robot requires
one additional cable (sold separately)
989434 – Junction Box Cable, Benchtop Robots, 37 pin male
D x 37 pin male D
Value
Number of Controllable Axes
X axis
Y axis
Z axis
R axis
3 to 4
200 mm
200 mm
50 mm
± 360°
Work Surface
Tool Head
7.0 kg
3.5 kg
Speed
PTP (X,Y)
PTP (Z)
PTP (R)
CP (X,Y, Z)
5 to 700 mm/s
2.5 to 250 mm/s
6 to 600 °/s
5 to 200 mm/s
Repeatability
Accuracy
X, Y, Z axis
R axis
± 0.01 mm
± 0.02°
Range of
Operation
Portable Weight
The specially designed, easy - to - use Teach Pendant is the
preferred device for programming and operating the robot.
A laptop computer loaded with the Teach Point Software can
also be used as an alternative.
989657 – Teach Pendant
Attribute
CPU
Control Method
Drive Method
I/O
Program Capacity
Data Memory Capacity
Dimensions
32 bit
Point-to-Point or Continuous Path
5-phase stepping motor
16
255 programs
30,000 points
Width, 3 axis
Width, 4 axis
Depth
Height, 3 axis
Height, 4 axis
Weight
Power Source
Consumption Current
Working
Environment
Parts Included
Additional
Information
Additional Accessories
Sold Separately
320 mm
330 mm
388 mm
536 mm
575 mm
18 kg
110/220 VAC; 50/60 Hz
200 VA
Temperature
Humidity
0 to 40°C
20 to 95% RH
(1) Teach Pendant By-Pass Connector
(1) Robot
(1) External Interlock By-Pass Connector (1) Power Cord
(1) CD-ROM Manual and LR-C Points Limited Software
Extensive Mounting Hardware Option Listing on page 95. See
www.equipment.loctite.com for Detailed Dimension drawings.
988000 – Solenoid Valve Module for pneumatic
control by the robot
98648 – PC Interface Cable – Benchtop Robots,
9 pin female D x 9 pin female D
87
MOTION
CONTROL
LOCTITE® 300 BENCHTOP ROBOT STATION
The Loctite® 300 Series Benchtop Robot has a 300 by 320 mm range of operation. Eight different
configurations, as shown in the chart, are available to meet your process requirements. This unit is
fully compliant with RIA (Robotics Industry Association) safety guidelines. Programming accessories,
dispensing equipment, integration cables and mounting hardware are sold separately.
Robot Dispense
Systems
Robot Configurations
Item Number
98287A
98288A
98289A
98290A
98291A
98292A
98293A
98294A
Description
300 x 320 mm, 3 axis, 110 V
300 x 320 mm, 3 axis, 110 V CE Rated
300 x 320 mm, 3 axis, 220 V
300 x 320 mm, 3 axis, 220 V CE Rated
300 x 320 mm, 4 axis, 110 V
300 x 320 mm, 4 axis, 110 V CE Rated
300 x 320 mm, 4 axis, 220 V
300 x 320 mm, 4 axis, 220 V CE Rated
Features:
•
•
•
•
•
•
•
Integrated solution – plug and play
Low cost operation and ownership
Compact size
Application specific software
Teach point programming
255 program, 30,000 point memory card
A wide variety of mounting hardware is available, see page 95.
Programming
Simple to program using either a multi-line backlit teach
pendant with user-friendly prompts or Windows® XP software.
The program allows for continuous path motion and
automatically interpolates any line or arc in all axes. The manual
provides step-by -step instructions for programming the robot.
No previous experience is required.
TECHNICAL SPECIFICATIONS
Attribute
989657 – Teach Pendant
300 mm
320 mm
100 mm
± 360°
Work Surface
Tool Head
11.0 kg
6.0 kg
Speed
PTP (X,Y)
PTP (Z)
PTP (R)
CP (X,Y, Z)
8 to 800 mm/s
3.2 to 320 mm/s
8 to 800 °/s
0.1 to 800 mm/s
Repeatability
Accuracy
X, Y, Z axis
R axis
± 0.01 mm
± 0.02°
Loctite® brand cables and junction boxes provide plug and
play integration solutions for a variety of Loctite® dispensing
systems. Single or multiple systems functionality can be
easily accommodated.
98395 – Interface Cable – Benchtop Robots, 37 pin male D x multi.
Use with all Loctite® Robot single dispenser integration.
Integrates Loctite® Precision Syringe Dispenser (97006),
Digital Syringe Dispenser (883976), Spray Controller (98521),
Integrated Semi- Auto Controllers (97007, 97010, 97017,
97020), Benchtop Peristaltic Dispenser (98548),
and Posi-Link™ Controller (98377).
98549 – Robot Interface Junction Box. Provides convenient
connection point between robots and up to 12 external
devices including all Loctite® dispensers, UV Wands, LED
cure systems, and 3rd party solenoids, grippers, etc. The
Junction Box accepts up to 7 inputs and 5 outputs, device
status indicator lights with a view window, and a 500
ma/24 VDC power supply for powering 3rd party devices.
Connection of the Junction Box to the Benchtop Robot requires
one additional cable (sold separately)
989434 – Junction Box Cable, Benchtop Robots,
37 pin male D x 37 pin male D
98648 – PC Interface Cable – Benchtop Robots,
9 pin female D x 9 pin female D
88
Portable Weight
989656 – LR- C Teach Point Software
Integration Accessories
3 to 4
X axis
Y axis
Z axis
R axis
Range of
Operation
Programming Accessories
The specially designed, easy - to - use Teach Pendant is the
preferred device for programming and operating the robot.
A laptop computer loaded with the Teach Point Software can
also be used as an alternative.
Value
Number of Controllable Axes
CPU
Control Method
Drive Method
I/O
Program Capacity
Data Memory Capacity
Dimensions
32 bit
Point-to-Point or Continuous Path
5-phase stepping motor
16
255 programs
30,000 points
Width
Depth
Height, 3 axis
Height, 4 axis
Weight
Power Source
Consumption Current
Working
Environment
Parts Included
Additional
Information
Additional Accessories
Sold Separately
560 mm
529 mm
649 mm
690 mm
35 kg
110/220 VAC; 50/60 Hz
200 VA
Temperature
Humidity
0 to 40°C
20 to 95% RH
(1) Teach Pendant By-Pass Connector
(1) Robot
(1) External Interlock By-Pass connector (1) Power Cord
(1) CD-ROM Manual and LR-C Points Limited Software
Extensive Mounting Hardware Option Listing on page 95. See
www.equipment.loctite.com for Detailed Dimension drawings.
988000 – Solenoid Valve Module for pneumatic
control by the robot
MOTION
CONTROL
LOCTITE® 400 BENCHTOP ROBOT STATION
The Loctite® 400 Series Benchtop Robot has a 400 by 400 mm range of operation. Eight different configurations, as shown in the
chart, are available to meet your process requirements. This unit is fully compliant with RIA (Robotics Industry Association) safety
guidelines. Programming accessories, dispensing equipment, integration cables and mounting hardware are sold separately.
Robot Configurations
98295A
98296A
98297A
98298A
98299A
98300A
98301A
98302A
Robot Dispense
Systems
Item Number
Description
400 x 400 mm, 3 axis, 110 V
400 x 400 mm, 3 axis, 10 V CE Rated
400 x 400 mm, 3 axis, 220 V
400 x 400 mm, 3 axis, 220 V CE Rated
400 x 400 mm, 4 axis, 110 V
400 x 400 mm, 4 axis, 110 V CE Rated
400 x 400 mm, 4 axis, 220 V
400 x 400 mm, 4 axis, 220 V CE Rated
Features:
•
•
•
•
•
•
•
Integrated solution – plug and play
Low cost operation and ownership
Compact size
Application specific software
Teach point programming
255 program, 30,000 point memory card
A wide variety of mounting hardware is available, see page 95.
Programming
Simple to program using either a multi- line backlit teach
pendant with user- friendly prompts or Windows® XP software.
The program allows for continuous path motion and
automatically interpolates any line or arc in all axes. The
manual provides step - by - step instructions for programming
the robot. No previous experience is required.
TECHNICAL SPECIFICATIONS
Attribute
400 mm
400 mm
150 mm
± 360°
Work Surface
Tool Head
11.0 kg
6.0 kg
Speed
PTP (X,Y)
PTP (Z)
PTP (R)
CP (X,Y, Z)
8 to 800 mm/s
3.2 to 320 mm/s
8 to 800 °/s
0.1 to 800 mm/s
Repeatability
Accuracy
X, Y, Z axis
R axis
± 0.01 mm
± 0.02°
Programming Accessories
The specially designed, easy - to - use Teach Pendant is the
preferred device for programming and operating the robot.
A laptop computer loaded with the Teach Point Software can
also be used as an alternative.
Portable Weight
989656 – LR- C Teach Point Software
Integration Accessories
Loctite® brand cables and junction boxes provide plug and
play integration solutions for a variety of Loctite® dispensing
systems. Single or multiple systems functionality can be
easily accommodated.
98395 – Interface Cable – Benchtop Robots, 37 pin male D x multi.
Use with all Loctite® Robot single dispenser integration.
Integrates Loctite® Precision Syringe Dispenser (97006),
Digital Syringe Dispenser (883976), Spray Controller (98521),
Integrated Semi- Auto Controllers (97007, 97010, 97017,
97020), Benchtop Peristaltic Dispenser (98548),
and Posi-Link™ Controller (98377).
98549 – Robot Interface Junction Box. Provides convenient
connection point between robots and up to 12 external
devices including all Loctite® dispensers, UV Wands, LED
cure systems, and 3rd party solenoids, grippers, etc. The
Junction Box accepts up to 7 inputs and 5 outputs, device
status indicator lights with a view window, and a 500
ma/24 VDC power supply for powering 3rd party devices.
CPU
Control Method
Drive Method
I/O
Program Capacity
Data Memory Capacity
Dimensions
98648 – PC Interface Cable – Benchtop Robots,
9 pin female D x 9 pin female D
32 bit
Point-to-Point or Continuous Path
5-phase stepping motor
16
255 programs
30,000 points
Width
Depth
Height, 3 axis
Height, 4 axis
Weight
Power Source
Consumption Current
Working
Environment
Parts Included
Connection of the Junction Box to the Benchtop Robot requires
one additional cable (sold separately)
989434 – Junction Box Cable, Benchtop Robots,
37 pin male D x 37 pin male D
3 to 4
X axis
Y axis
Z axis
R axis
Range of
Operation
989657 – Teach Pendant
Value
Number of Controllable Axes
Additional
Information
Additional Accessories
Sold Separately
584 mm
629 mm
799 mm
840 mm
42 kg
110/220 VAC; 50/60 Hz
200 VA
Temperature
Humidity
0 to 40°C
20 to 95% RH
(1) Teach Pendant By-Pass Connector
(1) Robot
(1) External Interlock By-Pass Connector (1) Power Cord
(1) CD-ROM Manual and LR-C Points Limited Software
Extensive Mounting Hardware Option Listing on page 95. See
www.equipment.loctite.com for Detailed Dimension drawings.
988000 – Solenoid Valve Module for pneumatic
control by the robot
89
MOTION
CONTROL
LOCTITE® 500 BENCHTOP ROBOT STATION
The Loctite® 500 Series Benchtop Robot has a 510 by 510 mm range of operation. Eight different configurations, as shown in the
chart, are available to meet your process requirements. This unit is fully compliant with RIA (Robotics Industry Association) safety
guidelines. Programming accessories, dispensing equipment, integration cables and mounting hardware are sold separately.
Robot Dispense
Systems
Robot Configurations
Item Number
98602
98603
98604
98605
98606
98607
98608
98609
Description
510 x 510 mm, 3 axis, 110 V
510 x 510 mm, 3 axis, 110 V CE Rated
510 x 510 mm, 3 axis, 220 V
510 x 510 mm, 3 axis, 220 V CE Rated
510 x 510 mm, 4 axis, 110 V
510 x 510 mm, 4 axis, 110 V CE Rated
510 x 510 mm, 4 axis, 220 V
510 x 510 mm, 4 axis, 220 V CE Rated
Features:
•
•
•
•
•
•
•
Integrated solution – plug and play
Low cost operation and ownership
Compact size
Application specific software
Teach point programming
255 program, 30,000 point memory card
A wide variety of mounting hardware is available, see page 95.
Programming
Simple to program using either a multi- line backlit teach
pendant with user- friendly prompts or Windows®XP software.
The program allows for continuous path motion and
automatically interpolates any line or arc in all axes. The
manual provides step - by - step instructions for programming
the robot. No previous experience is required.
Programming Accessories
The specially designed, easy - to - use Teach Pendant is the
preferred device for programming and operating the robot.
A laptop computer loaded with the Teach Point Software can
also be used as an alternative.
989657 – Teach Pendant
TECHNICAL SPECIFICATIONS
Attribute
Loctite® brand cables and junction boxes provide plug and play
integration solutions for a variety of Loctite® dispensing systems.
Single or multiple systems functionality can be easily
accommodated.
98395 – Interface Cable – Benchtop Robots, 37 pin male D x multi.
Use with all Loctite® Robot single dispenser integration.
Integrates Loctite® Loctite® Precision Syringe Dispenser
(97006), Digital Syringe Dispenser (883976), Spray Controller
(98521), Integrated Semi- Auto Controllers, (97007, 97010,
97017, 97020), Benchtop Peristaltic Dispenser (98548),
and Posi-Link™ Controller (98377)
98549 – Robot Interface Junction Box. Provides convenient connection
point between robots and up to 12 external devices including
all Loctite® dispensers, UV Wands, LED cure systems, and 3rd
party solenoids, grippers, etc. The Junction Box accepts up to
7 inputs and 5 outputs, device status indicator lights with a
view window, and a 500 ma/24 VDC power supply for
powering 3rd party devices.
Connection of the Junction Box to the Benchtop Robot requires
one additional cable (sold separately)
989434 – Junction Box Cable, Benchtop Robots,
37 pin male D x 37 pin male D
98648 – PC Interface Cable – Benchtop Robots,
9 pin female D x 9 pin female D
X axis
Y axis
Z axis
R axis
510 mm
510 mm
150 mm
± 360°
Portable
Weight
Work Surface
Tool Head
11.0 kg
6.0 kg
Speed
PTP (X,Y)
PTP (Z)
PTP (R)
CP (X,Y, Z)
8 to 800 mm/s
3.2 to 320 mm/s
8 to 800 °/s
0.1 to 800 mm/s
Repeatability
Accuracy
X, Y, Z axis
R axis
± 0.01 mm
± 0.02°
CPU
Control Method
Drive Method
I/O
Program Capacity
Data Memory Capacity
Dimensions
32 bit
Point-to-Point or Continuous Path
5-phase stepping motor
16
255 programs
30,000 points
Width
Depth
Height, 3 axis
Height, 4 axis
Weight
Power Source
Consumption Current
Working
Environment
Parts Included
Additional
Information
Additional Accessories
Sold Separately
90
3 to 4
Range of
Operation
989656 – LR- C Teach Point Software
Integration Accessories
Value
Number of Controllable Axes
676 mm
728 mm
799 mm
840 mm
42 kg
110/220 VAC; 50/60 Hz
200 VA
Temperature
Humidity
0 to 40°C
20 to 95% RH
(1) Teach Pendant By-Pass Connector
(1) Robot
(1) External Interlock By-Pass Connector (1) Power Cord
(1) CD-ROM Manual and LR-C Points Limited Software
Extensive Mounting Hardware Option Listing on page 95. See
www.equipment.loctite.com for Detailed Dimension drawings.
988000 – Solenoid Valve Module for pneumatic
control by the robot
MOTION
CONTROL
Heading –
LOCTITE® S440 SERIES SCARA-N ROBOT
Epoxy & Urethane Adhesives
The Loctite® S440 Series SCARA-N Robot provides maximum flexibility for complex dispensing applications. The robot features a
multi-jointed arm that moves above the work surface. The robot dispensing area is a kidney shaped area determined by the two
arm lengths. Eight different configurations, as shown in the chart, are available to meet your process requirements. Programming
accessories, dispensing equipment, cables and mounting hardware are sold separately.
Robot Dispense
Systems
Robot Configurations
The complete source on Loctite® brand adhesives, sealants, lubricants,
coatings,
Item Number
Description
1008351
SCARA-N, 440 mm, 3 axis, 110 V
dispensing and
1008340
SCARA-N, 440 mm, 3 axis, 110 V CE Rated
curing equipment
1008339
SCARA-N, 440 mm, 3 axis, 220 V
available only from
1008552
SCARA-N, 440 mm, 3 axis, 220 V CE Rated
Henkel
1008338
SCARA-N, 440 mm, 4 axis, 110 V
1008337
1008336
1008335
SCARA-N, 440 mm, 4 axis, 110 V CE Rated
SCARA-N, 440 mm, 4 axis, 220 V
SCARA-N, 440 mm, 4 axis, 220 V CE Rated
Features:
•
•
•
•
•
•
•
Integrated solution – plug and play
Low cost operation and ownership
Compact size
Application specific software
Teach point programming
25 program, 30,000 point memory card
A wide variety of mounting hardware is available, see page 95.
Programming
Simple to program using either a multi- line backlit teach
pendant with user- friendly prompts or Windows® XP software.
The program allows for continuous path motion and
automatically interpolates any line or arc in all axes.
The manual provides step - by - step instructions for
programming the robot. No previous experience is required.
TECHNICAL SPECIFICATIONS
Attribute
Programming Accessories
Range of
Operation
The operations box is required. The specially designed, easy - to use Teach Pendant is the preferred device for programming and
operating the robot. A laptop computer loaded with the Teach
Point Software can also be used as an alternative.
Portable Weight
987512 – Operations Box
1015106 – Teach Pendant
989656 – LR- C Teach Point Software
Speed
Integration Accessories
Repeatability
Accuracy
Loctite® brand cables and junction boxes provide plug and
play integration solutions for a variety of Loctite® dispensing
systems. Single or multiple systems functionality can be
easily accommodated.
98395 – Interface Cable – SCARA Robots, 37 pin male D x multi.
Use with all Loctite® Robots single dispenser integration.
Integrates Loctite® Loctite® Precision Syringe Dispenser
(97006), Digital Syringe Dispenser (883976), Spray Controller
(98521), Integrated Semi- Auto Controllers (97007, 97010,
97017, 97020), Benchtop Peristaltic Dispenser (98548), and
Posi-Link™ Controller (98377).
98549 – Robot Interface Junction Box. Provides convenient
connection point between robots and up to 12 external
devices including all Loctite® dispensers, UV Wands, LED
cure systems, and 3rd party solenoids, grippers, etc. The
Junction Box accepts up to 7 inputs and 5 outputs, device
status indicator lights with a view window, and a 500
ma/24 VDC power supply for powering 3rd party devices.
Connection of the Junction Box to the SCARA Robot requires
one additional cable (sold separately)
989434 – Junction Box Cable, SCARA Robots,
37 pin male D x 25 pin female D
98648 – PC Interface Cable – Benchtop Robots,
9 pin female D x 9 pin female D
Value
Number of Controllable Axes
3 to 4
X axis
Y axis
Z axis
R axis
260 mm ± 90°
180 mm ± 150°
100 mm
± 360°
Tool Head
PTP (X,Y)
PTP (Z)
PTP (R)
CP (X,Y, Z)
5.0 kg
15 to 1,500 mm/s
3.2 to 320 mm/s
1 to 1,000 °/s
0.1 to 800 mm/s
X, Y, Z axis
R axis
± 0.01 mm
± 0.02°
CPU
Control Method
Drive Method
I/O
Program Capacity
Data Memory Capacity
Dimensions
32 bit
Point-to-Point or Continuous Path
5-phase stepping motor
16 + 8 + Safety
255 programs
30,000 points
Width
Depth
Height
Weight
Power Source
Consumption Current
Working
Environment
Parts Included
Additional
Information
Additional Accessories
Sold Separately
290 mm
773 mm
840 mm
41 kg
110/220 VAC; 50/60 Hz
200 VA
Temperature
Humidity
0 to 40°C
20 to 95% RH
(1) Power Cord
(1) Robot
(1) I/O-S Short Plug
(1) CD-ROM Manual and LR-C Points Limited Software
Extensive Mounting Hardware Option Listing on page 95. See
www.equipment.loctite.com for Detailed Dimension drawings.
988000 – Solenoid Valve Module for pneumatic
control by the robot
91
MOTION
CONTROL
Dispense Stations
Dispense Stations
When a circular dispense pattern or an advancing dispense valve is
required, Loctite® brand motion control systems offer robust performance
at a lower cost than robotic dispense stations. They are simple to set up and
operate and their rugged construction makes them well suited for harsh
manufacturing environments.
In less complex applications, when a circular dispense pattern or
an advancing dispense valve is required, Loctite® brand motion
control systems offer robust performance at a lower cost than
robotic dispense stations.
PRODUCT
Loctite® Advancing Slide
Dispense Station
Item Number
98426
98427
98428
Dots or Potting
Circles, Arcs and/or Dots in
a Circular Pattern
Circles, Arcs and/or Dots in
a Circular Pattern
Dispense Pattern
Number of Dispense Points
Minimum Dispense Time
Adjustable Valve Angle
Slide Stroke
Fluid Pressure Regulation
Loctite® Single Rotary
Dispense Station
Loctite® Dual Rotary
Dispense Station
1
1
2
0.1 seconds
0.01 seconds
0.01 seconds
Yes
Yes
Yes
0 to 2"
0 to 2"
0 to 2"
0 to 90 psi
0 to 90 psi
0 to 90 psi
8.5" Diameter
4" Diameter at 90°
6" Diameter at 45°
Maximum Part Size 1
N/A
Maximum Part Height 1
12"
12"
8"
Weight Capacity 2
N/A
30 lbs.
30 lbs.
Rotating Speed
Programming
Program Capacity
Dimensions
Weight
Power Source
N/A
0.1 to 100 RPM
0.1 to 100 RPM
4 Adjustable Range
Analog Timers
Multi-line Digital Control
Panel with User Friendly Prompts
Multi-line Digital Control
Panel with User Friendly Prompts
N/A
10 Programs, 20 Events
per Program
10 Programs, 20 Events
per Program
Width
12"
14.125"
14.1"
Depth
14.75"
11.5625"
11.6"
Height
28"
28.7"
23.9"
25 lbs.
26 lbs.
25 lbs.
110/220 VAC; 50/60 Hz
110/220 VAC; 50/60 Hz
110/220 VAC; 50/60 Hz
1 – The maximum part sizes are estimates and can vary depending on the specific part configuration and
the size of the dispense syringe, cartridge or valve used. All units have 0 to 2" adjustable stroke.
2 – The weight capacity of the rotary station can vary depending on the center of gravity of the part and the program’s
rotating speed and acceleration. 30 lb. was provided as a general indicator of the motor’s capacity. At weights
in this range, the equipment should be evaluated to confirm performance.
92
For additional information and the full line of equipment, visit www.equipment.loctite.com.
MOTION
CONTROL
Dispense Stations
LOCTITE® ADVANCING SLIDE DISPENSE STATION
Item Number: 98426
The Loctite® Advancing Slide Dispense Station is used for repetitive dot dispensing or potting
operations that require motion in the z-axis. It is a fully integrated system that will control any
syringe, cartridge or dispense valve; no separate dispense controller is required. The rugged, allmetal construction is designed for tough manufacturing environments.
Features:
•
•
•
•
•
•
•
•
•
•
•
Integrated solution – plug and play
Compact size
Precision timers with accuracy to 0.1 second
Robust slide design
Stroke adjustment 0 to 2"
Adjustable height, position and angle of dispense point
Sturdy work surface with 4 mounting holes for part fixturing
Rugged, all - metal enclosure
Vacuum suck- back to eliminate drips when syringe dispensing
Auto repeat mode cycles unit continuously without foot switch
Wide variety of mounting hardware available
Installation Overview
A mounting bracket must be purchased separately to hold the
syringe, cartridge, or valve. The mounting bracket simply slides
over the 3 3⁄4" mounting rail that is attached to the bottom of
the slide and is secured using a nylon screw. Once the
dispenser is attached, the pneumatic dispense controls are
pressed into the clearly labeled connections. The pneumatic
dispense control fittings are 1⁄ 4" female NPT fittings and the
most commonly required fittings to integrate a syringe,
cartridge or valve are supplied.
The height, position and angle of the dispense point can
easily be adjusted using the stand clamps. The stand clamps are
specifically designed to adjust effortlessly yet consistently hold
their position during operation.
The dispensing process is controlled using five variables that
are easy to adjust, set, and monitor. All timers have adjustable
ranges that yield good precision over a very wide range.
TECHNICAL SPECIFICATIONS
Attribute
Value
Dispense Pattern
Dots or potting
Number of Dispense Points
Slide Stroke
Maximum Part Height 1*
Dimensions
12"
Depth
14.75"
Height
RANGE
Weight Capacity 2*
Vacuum Range
Dispense pressure
0 to 90 psi
Delay time before dispense
0.1 sec to 500 hours
Air Input
Dispense time
0.1 sec to 500 hours
Air Output
Slide down time
0.1 sec to 500 hours
Power Source
Auto cycle time
0.1 sec to 500 hours
Programming
Parts Included
Required Separate Purchases
•
•
•
•
•
Dispense valve, syringe adapter, or cartridge adapter
Mounting bracket
Dispense needles
Fixture to locate part(s)
Tubing for connecting valve(s) and air in
12"
Width
Weight
VARIABLE
1
0 to 2"
Additional Information
28"
25 lbs.
50 lbs.
1 to 15 inches Hg
Clean, dry air not to exceed 125 psig and filtered
with a maximum of 50 microns
0 to 100 psi
110/220 VAC; 50/60 Hz
4 Adjustable Range Analog Timers
(1) Advancing Slide Dispense Station
(1) Fitting Kit for Dispenser Connection
(1) Foot Switch
(1) Power Cord
(1) Manual
For Valve Dispensing, see pages 64-74.
For Syringe Dispensing, see page 83.
For Mounting Hardware, see page 95.
For Dispensing Tips, see pages 80-81.
* For explanation of notes 1 and 2, please refer to notes
below the chart on page 92.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
93
MOTION
CONTROL
LOCTITE® SINGLE ROTARY DISPENSE STATION
Item Number: 98427
Dispense Stations
The Loctite® Single Rotary Dispense Station is used for repetitive dispensing of circles, arcs
and/or dots in a circular pattern that also requires motion in the z-axis. It is a fully integrated
system that will control a syringe, cartridge or dispense valve. No separate dispense controller
is required. The programming is menu driven using a multi-line, back-lit display. The rugged,
all- metal construction is designed for tough manufacturing environments.
LOCTITE® DUAL ROTARY DISPENSE STATION
Item Number: 98428
The Loctite® Dual Rotary Dispense Station is used for repetitive dispensing of circles, arcs
and/or dots in a circular pattern on two simultaneously controlled stations. It is a fully
integrated system that will control a syringe, cartridge or dispense valve. No separate dispense
controller is required. The programming is menu driven using a multi-line,
back-lit display. Installation and integration with a dispense syringe,
cartridge or valve is very simple, only requiring a mounting
bracket and several pneumatic connections. The rugged, all- metal
construction is designed for tough manufacturing environments.
98427 – Loctite® Single
Rotary Dispense Station
Features for Rotary Dispense Stations:
•
•
•
•
•
•
•
•
•
•
Integrated solution – plug and play
Compact size
Easy to program with menu driven prompts
Robust slide design
Stroke adjustment 0 to 2"
Adjustable height, position and angle of dispense point
Rugged, all - metal enclosure
Vacuum suck-back to eliminate drips when syringe dispensing
Auto repeat mode cycles unit continuously without foot switch
Wide variety of mounting hardware available
98428 – Loctite® Dual Rotary
Dispense Station with a 90° set up
98428 – Loctite® Dual Rotary
Dispense Station with a 45° set up
Programming
Simple to program using a multi - line, back- lit user interface
panel with user friendly prompts. It is possible to enter 10
programs consisting of full circles, dots and/or arcs. Each of
these dispense patterns is considered an “event” and there can
be twenty events per program. For each event, the user specifies
the start and end coordinates in degrees (determined in set up
mode), the rotating speed, the delay after the slide advances but
before dispensing starts, and the delay after dispensing before
retracting the slide. Programs can be initiated using either a
foot switch or the start button. When this occurs, a complete
program cycle is executed. The table rotates using a stepper
motor that allows the location to be specified within 0.1 degree.
TECHNICAL SPECIFICATIONS
Attribute
98427
Dispense Pattern
Number of Dispense Points
Rotating Speed
Slide Stroke
Maximum Part Height 1 *
Maximum Part Size 1 *
Dimensions
1
2
0.1 to 100 RPM
0.1 to 100 RPM
0 to 2"
0 to 2"
12"
8" at 90°
8.5" Diameter
4" Diameter at 90°
6" Diameter at 45°
Width
14.1"
14.1"
Depth
11.6"
11.6"
Height
28.7"
23.9"
26 lbs.
25 lbs.
30 lbs.
30 lbs.
Weight
Weight Capacity 2 *
Air Input
Air Output
Clean, dry air not to exceed 125 psig and filtered
with a maximum of 50 microns
0 to 100 psi
Power Source
Required Separate Purchases
•
•
•
•
•
Dispense valve, syringe adapter, or cartridge adapter
Mounting bracket
Dispense needles
Fixture to locate part(s)
Tubing for connecting valve(s) and air in
98428
Circles, Arcs and/or Dots in a Circular Pattern
Program Capacity
Programming
Parts Included
Additional Information
0 to 100 psi
110/220 VAC; 50/60 Hz
10
10
Multi-Line Digital Control Panel with User Friendly Prompts
(1) Rotary Dispense Station
(1) Fitting Kit for Dispenser Connection
(1) Foot Switch
(1) Power Cord
(1) Manual
For Valve Dispensing, see pages 64-74.
For Syringe Dispensing, see page 83.
For Mounting Hardware, see page 95.
For Dispensing Tips, see pages 80-817.
* For explanation of notes 1 and 2, please refer to notes
below the chart on page 92.
94
For additional information and the full line of equipment, visit www.equipment.loctite.com.
MOUNTING BRACKET KITS – Mounting bracket kits are used
Item #
Item #
Description
98332
Tip locator bracket for 30 ml syringes
98333
Tip locator bracket for 300 ml cartridges
98334
Tip locator bracket for 98009 and 98013 valves
98335
Tip locator bracket for 97113 and 97114 valves
98407
Tip locator bracket for 983914 and 986300 poppet valve
Description
* These are sized for 1", 25 gauge stainless steel needles and
must be modified by the user for larger gauge sizes.
98316
30 ml syringe mounting bracket kit
98318
300 ml cartridge mounting bracket kit
98326
98009 and 98013 valve mounting bracket kit
98327
97113 and 97114 valve mounting bracket kit
Z HEIGHT ADJUSTMENT PLATE FOR 3 AXIS BENCHTOP ROBOTS
98406
This plate allows you attach the mounting rails above or
below the mounting bracket on the robot.
98646
983914 and 986300 poppet valve mounting bracket kit
98520 spray and 98084 micro needle valve
mounting bracket kit
Universal syringe bracket for Posi-Link™
98647
50 ml dual cartridge bracket for Posi-Link™
98441
98669
98591 and 98595 LED mounting bracket kit
Item #
98357
929541
3, 5 AND 10 ML SYRINGE ADAPTERS – These adapters are
inserted into the 30 ml syringe mounting bracket kit to adapt it
for 3, 5 and 10 ml syringes. The 30 ml syringe mounting bracket
(item 98316) must be purchased separately.
Item #
Description
Description
Z height adjustment plate
Z height adjustment plate - Posi-Link™
200-400 Nests
MOUNTING RAILS FOR 3 AXIS BENCHTOP ROBOTS AND
DISPENSE STATIONS – A mounting rail is required when using
Loctite® brand mounting hardware for all 3 axis Benchtop
Robots and Dispense Stations.
Item #
Description
98320
10 ml adapter for use with 98316
98328
3 3⁄ 4 inch bar with two cap screws
98321
5 ml adapter for use with 98316
98329
8 3⁄ 4 inch bar with two cap screws
98322
3 ml adapter for use with 98316
98330
12 inch bar with two cap screws
MOUNTING ADAPTER FOR ALL 4 AXIS ROBOTS –
A mounting adapter is required when using
Loctite® brand mounting hardware for all 4 axis
robots. The mounting adapter includes
a 360 degree rotation kit.
Item #
98336
Dispense Stations
to grasp syringe barrels, Loctite® Posi-Link™ syringe and dual
cartridge nests, 300 ml cartridges, dispense valves, and LEDs.
Mounting rails or adapters are required to mount the brackets
on the robot or dispense station.
TIP LOCATOR BRACKETS * – Tip locator brackets position the
dispense tip to increase precision and are used to mechanically set
the tip height during installation. A mounting bracket and rail,
plate or adapter must be purchased separately.
Description
MOUNTING PLATE FOR 3 AXIS SCARA ROBOTS – A mounting
plate is required when using Loctite® brand mounting
hardware for all 3 axis SCARA Robots (except when
using a complete mounting kit).
Item #
Description
98337
Mounting plate for SCARA robot
Mounting adapter for 4 axis robots
WORKBENCHES
360 DEGREE ROTATION KIT – This is used to allow for 360
• Strong and sturdy workbenches
• Accomodate all Loctite® brand robots
degrees of rotation when using a mounting bracket kit or tip
locator. A 360 degree rotation kit is already included with
the mounting adapter for 4 axis robots.
GUARDING SYSTEMS – For Plants requiring
Item #
98325
Description
360 degree rotation kit
COMPLETE MOUNTING KITS FOR 3 AXIS SCARA ROBOTS *
Complete mounting adapter kits hold the syringe,
cartridge or valve, and position the dispense tip
60 mm from the end of the tool arm.
Item #
Description
98340
30 ml syringe holder
98341
300 ml cartridge holder
98342
98009 and 98013 valve holder
98343
97113 and 97114 valve holder
98408
983914 and 986300 poppet valve holder
* These are sized for 25 gauge needles and must be
modified by the user for larger gauge sizes.
higher safety levels
• Light Curtain or Interlocked Sliding Door* on front
• Sturdy extruded aluminum frame
• Polycarbonate panels on left, right and rear
• Operator control panel mounted on front right
• Direct plug-in to robots
* Interlocked door model for Benchtop units only
Item #
989783
989784
989785
989860
989787
989763
989788
989771
989789
989777
989852
For additional information and the full line of equipment, visit www.equipment.loctite.com.
MOTION
CONTROL
Loctite® Brand Mounting Hardware,
Workbenches, and Guarding
Enclosures
Description
200 Series Workbench
300 Series Workbench
400/500 Series Workbench
SCARA Series Workbench
200 Series Slide Door
200 Series Light Curtain
300 Series Slide Door
300 Series Light Curtain
400/500 Series Slide Door
400/500 Series Light Curtain
SCARA Light Curtain
Dimensions
36" W x 24" D x 36" H
42" W x 30" D x 36" H
48" W x 36" D x 36" H
48" W x 48" D x 36" H
22" W x 24" D x 27" H
22" W x 24" D x 27" H
30" W x 30" D x 30" H
30" W x 30" D x 30" H
32" W x 36" D x 35" H
32" W x 36" D x 35" H
48" W x 48" D x 36" H
95
FUME
FILTRATION
System
Fume Filtration System
BENCHTOP FUME FILTRATION SYSTEM
Item Number: 98277
The Benchtop Fume Filtration System is designed to
remove dust particulate and fumes emitted by
adhesives, sealants, cleaning solvents, and other
chemicals. This compact system offers flexible
operation in a small space and matches the airflow
of many larger systems. It features quiet operation
and a bi - colored LED light to indicate blocked filters.
This unit can be operated as an open plenum for
a working area up to 12" wide or can easily be
converted into an arm system for more direct fume
capture. The 2" x 24" flexible arm can be positioned
to be unobtrusive to the operator, yet provide
effective air filtration. It is equipped with a Deep
Bed Activated Carbon Fume Filter. HEPA/Carbon
Filters are available separately.
Features:
•
•
•
•
High airflow rates
Runs quietly
LED light indicates blocked filter
Efficient arm or plenum applications
provide flexibility
• Compact, space - saving footprint
• UL, CSA, and CE compliant
TECHNICAL SPECIFICATIONS
Installation Overview
This filtration system filters fumes emitted
from adhesives, sealants, cleaning solvents,
and other chemicals, as well as dust
particulate from other sources.
Air Inlet Ports
2" Diameter x 24" Long or 12" Plenum
Fan Capacity
50 cfm
Recommended Spare Parts
Power Supply
90/264 VAC; 50/60 Hz
Motor Rating
0.11 HP; 85 watt
987200 – Filter, Pre - Filter (set of 5)
987201 – Filter, Deep Bed Carbon
System Capacity
Maximum Static Pressure
50 cf
5 inches of water
Power Consumption
1 amp
Noise Level, Approx.
55 dBA
Dimensions (W x D x H)
12" x 10.4" x 11.75"
Weight
15.4 lbs.
Power
On/off switch with
power indicator light
Approvals
96
UL, CSA, CE
Parts Included
(1) Fume Filtration System (1) Pleated Pre-Filter
(1) Deep Bed Activated Carbon Fume Filter
Additional Accessories
Sold Separately
987364 – HEPA / Carbon Filter
987365 – Arm Adapter
(1) Manual
(1) Power Cable
987366 – Exhaust Arm
987367 – Arm Nozzle, 40 mm
For additional information and the full line of equipment, visit www.equipment.loctite.com.
O-RING
FABRICATION
O-Ring Fabrication
Precision
O-Ring Kit
Henkel has introduced our new Loctite® Precision O - Ring Cut and Splice Tool that
turns industrial o-ring cord stock into precise o-rings that are ready for use in a matter
of seconds. Digital calipers ensure accurate and repeatable measurement to ensure that
you get a correctly sized o-ring every time.
LOCTITE® PRECISION O-RING CUT AND SPLICE TOOL
Item Number: 98613
The Loctite® Precision O - Ring Cut and Splice Tool is a patent
pending, industrial grade tool that provides precise measuring,
cutting and bonding of both standard and metric o-ring cord
stock. This tool offers a cost effective solution to creating
custom o - rings from 1.05" to 4" (26 mm to 100 mm) in
diameter. It incorporates a digital caliper for precise
measurement with every o - ring you make. The scale displays
either standard or metric dimensions. The cutting fixture is
designed to ensure clean, square cuts, while rugged holding
clamps provide seamless bonding of the cord stock.
Features:
• Digital caliper provides precise measurement
down to 0.01 mm resolution
• Measurements can be either in inches or mm
• Convenient conversion chart provides cord stock
length vs. required o- ring diameter
• Gold plated cutting blade ensures clean cuts and longer life
• Accommodates cord stock up to 1⁄4" (7 mm) in diameter
• Acetal Copolymer holding clamps are rugged and
resist any adhesive build-up
Theory of Operation
O-ring cord stock is placed through the cutting blade assembly
and securely attached to the first holding clamp on the sliding
digital caliper assembly. The caliper is then extended from a
zero point away from the cutting face to the precise distance
that will equate to the o-ring diameter required. The cutting
blade is then manually engaged to cut the exact length of cord.
The loose end of cord stock is now attached to the 2nd holding
clamp that properly aligns both ends to each other. Loctite®
404™ Quick Set™ Instant Adhesive (available as part of kits and
also sold separately) is applied and both ends are brought
together making a perfect o -ring bond in just a few seconds.
The Starter Kit and Splice Tool are sold separately.
TECHNICAL SPECIFICATIONS
Dimensions
17.25" L x 6.125" W x 4.75" H
Weight
2.8 lbs.
Power
Digital Scale uses Button Cell SR44, 1.55 V
Maximum Diameter Cord Stock Diameter: 1⁄4" (7 mm)
O-Ring Dimensions
O-Ring Diameter Range: 1.05" to 4.0"
Scale Resolution: 0.01 mm
Parts Included
(1) O-Ring Cut and Splice Tool (1) Manual (1) Instruction Sheet
Additional Accessories Sold Separately
8900513 –
Loctite® Precision
O-Ring Starter Kit
Parts Included: (1 each) 3' O-Ring Stock, 0.093",
0.125", 0.187" and 0.25" Diameter
(1) 75326 – Loctite® Clean-Up Solvent
(1) 74126 – Loctite® Water Proofing Solution
(1) 46551 – Loctite® 404™ Quick Set™ Instant Adhesive
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Loctite® O-Ring Replacement Cord Stock
(All Buna-N, 5 ft. length)
909395 – 0.093" diameter
909394 – 0.125" diameter
909396 – 0.187" diameter
909393 – 0.250" diameter
97
LIGHT CURE
Light Cure Solutions
Solutions
Henkel offers the widest selection of light curing equipment available from any one
company on the market today. Our Loctite® brand insures you have the most innovative
and dependable systems for all your light curing adhesive applications. Whether your
process calls for a manual, semi - automatic or fully integrated automatic solution, you
will find the Loctite® brand light curing device to meet your specific requirements.
Please see the charts below which summarize our complete line.
PRODUCT
Item Number
Lamp Type
LED CURING DEVICES – High powered benchtop and portable systems for visible light cure adhesives, providing effective spot curing
solutions for both manual or integrated automatic systems.
Loctite® 7700 LED Light Source
98591
LED - 405 nm
Loctite® 7700-HD LED Light Source
98601
Loctite® 7703 LED Light Source
98595
LED - Proprietary
Wavelength
Loctite® 7703-HD LED Light Source
883979
Loctite® CureJet™ 405 LED
976420
LED - 405 nm
Loctite® CureJet™ Indigo™ LED
976418
LED - Proprietary
Wavelength
Loctite® LED Controller
976419
•
NEW
NEW
NEW
WAND SYSTEMS – Four different spot curing systems. one visible light and three UV, each with its own range of curing intensity from
1 to 20 W/cm 2. These systems are ideal for both manual or integrated automatic systems.
Loctite® Indigo™ 7720
Visible Light Wand System
98633
100 watt Metal Halide
98317A
Loctite® ZETA® 7735
UV Wand System
958216
(Bulb Life Monitoring)
50 watt
High Pressure Mercury Arc
98157A
Loctite® ZETA® 7740
UV Wand System
958228
(Bulb Life Monitoring)
100 watt
High Pressure Mercury Arc
98450
Loctite® ZETA® 7760
UV Wand System
98
958239
(Bulb Life Monitoring)
200 watt
High Pressure Mercury Arc
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
Solutions
PRODUCT
Item
Number
PRODUCT
Lamp Type
ENCLOSED CHAMBER AND FLOOD SYSTEMS – These systems are ideal for batch
processing. UV and alternate visible light bulb options are available.
Item
Number
CURE CONVEYORS – Can be used for either continuous or batch
processing of assemblies.
NEW
Loctite®
UVALOC 1000 UV
Cure Chamber
Loctite®
ZETA® 7401
UV Chamber
805741
98039
1000 watt
Mercury Vapor
400 watt
Metal Halide
Loctite®
Indigo™ 7418
Visible Flood System
Loctite®
ZETA® 7420
Visible Light
Flood System
98413
Loctite® ZETA® 7415 UV
Benchtop Conveyor
98003
300 W/in.
Electrodeless
(Sold Separately)
Loctite® ZETA® 7610 UV
Benchtop Conveyor
98588
1,800 watt Medium
Pressure Mercury Arc
Lamp
LIGHT SOURCES – Can be used with our Loctite ® ZETA ® UV conveyors or
integrated into a custom system with added shielding, cooling and venting
(not included with these products).
Loctite® Electrodeless
Lamp Assembly and
Power Supply
®
Loctite
ZETA® 7411-S UV
Flood System
400 watt
Metal Halide
Loctite®
High Intensity
Ultraviolet Sources
971031
Lamp Type
400 watt
Visible Arc Lamp
PRODUCT
98004
(208 VAC)
98005
(240 VAC)
980160
300 W/in.
Electrodeless
982440
1,500 watt
Medium Pressure
Mercury Arc Lamp
Item
Number
Measurement
Range
LIGHT METERS – UV and visible light cure systems. These meters provide precise
and repeatable measurement of any Loctite ® brand light cure system to ensure your
process remains in control.
98060
(110 V)
500 watt
Visible Arc Lamp
98182
(220 V)
For proper eye protection, use
Loctite® brand ultraviolet
safety glasses.
Loctite® ZETA®
7011-A DosimeterRadiometer
98086
320 to
400 nm
Loctite® ZETA®
7011-V DosimeterRadiometer
98089
350 to
500 nm
Loctite®
ZETA® 7021
Spot Radiometer
98048
280 to
400 nm /
3 and 5 mm
wands
Item 97210
Item 98452
For additional information and the full line of equipment, visit www.equipment.loctite.com.
99
LIGHT CURE
LED Light Sources
LED Light Sources
Henkel has introduced these new innovative and effective LED light
curing devices. High power, portability, continuous duty cycles and long
LED life are some of the key reasons that make Loctite® brand LED light
sources the optimal solution for many light curing adhesive applications.
LOCTITE® 7700 LED LIGHT SOURCE
LOCTITE® 7703 LED LIGHT SOURCE
Item Number: 98591
Item Number: 98595
Light to medium duty
use cycles: <50% on time.
Light to medium duty
use cycles: <50% on time.
These high powered, fully portable, hand held light sources are capable of curing a variety of UV/visible
adhesives in a matter of seconds. With the focused nature of this system’s spectral output, IR output is
negligible and part assembly heating is virtually eliminated. Lightweight and compact in size, these units
provide extensive use flexibility for even the most crowded or hard - to - reach locations.
Features:
• Instant On/Off – no warm up like traditional UV systems
• LED life lasts up to 5 times longer than typical UV bulb units
• Pinpoint tip allows close exposures even in the tightest locations
Tested Loctite® Brand Light Cure Adhesives Cured Tack Free:
Item Number: 98591
• 3105™ (3311™)
• 3106™ (3321™)
• 3107™ (3341™)
• 3525™
Item Number: 98595
• 3922™
• 3924™
• 3926™
• 3944™
• 3971™
• 3972™
• All Loctite®
Flashcure®
Light Cure
Adhesives
• Loctite® 3552™
and 3553™ Indigo™
Visible Light Cure Adhesives
OPERATIONAL OPTIONS
98591 and 98595 operate on batteries or while plugged into AC power source.
Optional timer or foot switch
are also available.
98443 –
Timer
TECHNICAL SPECIFICATIONS
Item Number
Dimensions
98591 – Loctite® 7700
LED Light Source
Additional Accessories Sold Separately
98595 – Loctite® 7703
LED Light Source
9" L x 1.1" W x 0.81" H
Weight
0.5 lbs.
Utilities
Batteries or Universal 110-240 V; 47-263 Hz
Light Source
Typical Cure Area
Typical Output*
Spectral Output Range
98440 –
Foot Switch
High Powered LED
Up to 1⁄ 4" x 1⁄ 4"
0.5 to 1.0 W/cm 2
3.0 to 3.5 W/cm 2
385 to 425; Primary Peak
405 nm*
Proprietary
98452 – Loctite® Safety Glasses
(Removes all wavelengths
200 to 540 nm)
98089 –
Loctite®
ZETA® 7011-V
Dosimeter
98522 –
Loctite® LED
Holder
8900494 – Replacement Battery Kit
989620 – AC Battery Charger
98453 – Loctite® ZETA® Dosimeter Adapter
967055 – LED Protective Tip Covers (5 pack)
* Exact output measurement is dependent on the brand and calibration method of the meter used. These measurements
were made with a Loctite® ZETA® 7011-V Dosimeter-Radiometer at a distance of 0.25".
XXX
100
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
LOCTITE® 7703-HD LED LIGHT SOURCE
Item Number: 98601
Item Number: 883979
Heavy continuous duty
cycles: Up to 100% on time.
LED Light Sources
LOCTITE® 7700-HD LED LIGHT SOURCE
Heavy continuous duty
cycles: Up to 100% on time.
These heavy duty point light source LED models provide the same intensity and curing characteristics as the battery powered 98591
and 98595 units, but offer 100% on - time duty cycle capability. Ideal for process line integrations, these units also have alternate
operational choices for cycle initiation to meet various processing requirements.
Features:
• Instant On/Off – no warm up like traditional UV systems
• LED life lasts up to 5 times longer than typical UV bulb units
• Pinpoint tip allows close exposures even in the tightest locations
Tested Loctite® Brand Light Cure Adhesives Cured Tack Free:
Item Number: 98601
• 3105™ (3311™)
• 3106™ (3321™)
• 3107™ (3341™)
• 3525™
Item Number: 883979
• 3922™
• 3924™
• 3926™
• 3944™
• 3971™
• 3972™
• All Loctite®
Flashcure®
Light Cure Adhesives
• Loctite® 3552™
and 3553™ Indigo™
Visible Light
Cure Adhesives
OPERATIONAL OPTIONS
98601 and 883979 require the choice of a foot switch, PLC cable, LED timer or pistol grip timer option in order to operate.
97201 –
Foot Switch
8900550 –
PLC Cable
TECHNICAL SPECIFICATIONS
®
Item Number
98601 – Loctite 7700-HD
LED Light Source
Dimensions
Additional Accessories Sold Separately
®
883979 – Loctite 7703-HD
LED Light Source
0.75 lbs.
Utilities
Universal 110-240 V; 47-263 Hz
Spectral Output Range
98089 – Loctite®
ZETA® 7011-V
Dosimeter
High Powered LED
98453 – Loctite® ZETA® Dosimeter Adapter
967055 – LED Protective Tip Covers (5 pack)
Up to 1⁄ 4" x 1⁄ 4"
Typical Cure Area
Typical Output*
98452 – Loctite® Safety Glasses
(Removes all wavelengths 200 to 540 nm)
8.9" L x 1.4" W x 2.0" H
Weight
Light Source
1003327 –
Pistol Grip
and Timer
960356 –
LED Timer
0.5 to 1.0
W/cm 2
385 to 425; Primary Peak
405 nm*
3.0 to 3.5 W/cm 2
Proprietary
989929 –
AC Charger for LED-HD
1044301 – LED-HD Pistol Grip Battery Kit
(Kit Includes Replacement Battery,
Cap and Charger)
* Exact output measurement is dependent on the brand and calibration method of the meter used. These measurements
were made with a Loctite® ZETA® 7011-V Dosimeter-Radiometer at a distance of 0.25".
For additional information and the full line of equipment, visit www.equipment.loctite.com.
101
LIGHT CURE
L OCTITE ® C URE J ET ™ LED L IGHT S OURCES
LED Light Sources
Our new Loctite® CureJet™ LEDs are our highest power LED
spot curing systems. This innovative design offers significantly
wider cure area and curing intensity capability than our single
point LED devices, providing the ultimate in processing speeds.
Choose the system based on the adhesive systems
that are in use.
NE
W
LOCTITE® CUREJET™ 405 LED Item Number: 976420
LOCTITE® CUREJET™ INDIGO™ LED Item Number: 976418
Loctite® CureJet™ shown with LED Controller
and cable sold separately
Features:
• 100% on time duty cycle
• Highly focused LED with peak intensity at
0.25" from cure surface
• Instant on/off – no warm up like traditional UV systems
• Manual or timed light exposures using an
integrated control timer
• LED life lasts up to 5 times longer than typical UV bulb units
• Internal diagnostics and digital I/O port, connect via
optional PLC interface cable
• Stackable with 1" center to center spacing
Cure Area [cm2]
Comparitive Cure Area versus Distance from Cure Surface
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
0.25
0.5
0.75
1.0
Distance [inches]
7700-HD
Comparative Irradiance versus Distance from Cure Surface
Comparative Irradiance versus Distance from Cure Surface
Irradiance [W/cm2]
Loctite® CureJet™ Indigo™ LED
Irradiance [W/cm2]
Loctite® CureJet™ 405 LED
1.25
CureJet™
1.200
1.000
0.800
0.600
0.400
0.200
5.000
4.000
3.000
2.000
1.000
0.000
0.000
0
0.5
1.0
1.5
2.0
Distance [inches]
CureJet™ 405
0
2.5
1
2
Distance [inches]
7700-HD
CureJet™ Indigo™
3
Indigo™ 7703-HD
Tested Loctite® Brand Light Cure Adhesives Cured Tack Free:
• 3105™ (3311™)
• 3106™ (3321™)
• 3107™ (3341™)
• 3525™
• 3922™
• 3924™
• 3926™
• 3944™
• 3971™
• 3972™
• All Loctite®
• Loctite® 3552™
Flashcure®
and 3553™ Indigo™
Light Cure Adhesives
Visible Light
Cure Adhesives
TECHNICAL SPECIFICATIONS
Item Number
Dimensions
Weight
976420 – Loctite®
CureJet™ 405 LED
Additional Items Sold Separately
976418 – Loctite®
CureJet™ Indigo™ LED
976419 – Loctite®
LED Controller
1" W x 2.5" H x 10.25" L 1" W x 2.5" H x 10.25" L
10" W x 4" H x 9.75" D
1 lbs.
1 lbs.
8 lbs.
Input Power
•
•
85/264 VAC; 50/60 Hz
Maximum Current
•
•
•
Typical Intensity*
1.1 W/cm 2
4.3 W/cm 2
•
0.38"
0.38"
•
405 nm
Proprietary
•
Cure Diameter at 0.25"
Distance (Peak Intensity)
Spectral Peak
REQUIRED ITEMS – SOLD SEPARATELY
976419 –
Loctite® LED
Controller
98089 – Loctite®
ZETA® 7011-V
Dosimeter
[Requires 1007439 Adapter]
1007349 – Loctite®
CureJet™ LED Dosimeter Adapter
1008352 – 3 m Interconnecting Cable
1008353 – 1 m Interconnecting Cable
98452 – Loctite®
Safety Glasses
(Removes all wavelengths 200 to
540 nm) [Recommended]
8900550 – PLC Interface Cable
* As measured with a Loctite® 7011-V at a distance of 0.25".
102
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
Wand Systems
Wand Systems
Loctite® ZETA® light cure wand systems are used for the continuous or batch processing of assemblies that
require curing in small areas. These cost effective systems provide a variety of curing attributes. Selection of a
Loctite® ZETA® wand system is based on the required lamp intensity and the number and length of the light
guides needed as well as the need for continuous intensity monitoring or measuring. The time required to
complete the curing process depends primarily on the offset distance from the end of the light guide to the
surface of the adhesive, and the type of adhesive being used.
PRODUCT
Loctite® Indigo™ 7720
Visible Light Wand System
Loctite® ZETA® 7735
UV Wand Systems
Loctite® ZETA® 7740
UV Wand Systems
Loctite® ZETA® 7760
UV Wand Systems
98633
98317A / 958216
98157A / 958228
98450 / 958239
Item Number
1
Useful Curing Diameter
1
⁄4" to 1"
Light Guides
1
⁄4" to 1"
1
⁄4" to 1"
⁄4" to 1"
Specific guides are required for each wand. See individual wand descriptions on pages 105-107.
100 watt Metal Halide
50 watt High Pressure
Mercury Arc
100 watt High Pressure
Mercury Arc
200 watt High Pressure
Mercury Arc
Typical Intensity*
1.0 to 1.5 W/cm 2
5 to 7 W/cm 2
9 to 11W/cm 2
16 to 20 W/cm 2
Optimized Spectral
Output Range
Visible
UVA, B, C
UVA, B, C
UVA, B, C
Spectral Wavelength
–
250 to 410 nm
250 to 410 nm
250 to 410 nm
Replacement Bulb
(Item Number / Type)
98635 – Lamp / Reflector
Module, 100 W Metal Halide
98339 – Lamp / Reflector
Module, 50 W (HPMA)
984818 – Lamp / Reflector
Module, 100 W (HPMA)
98451– Lamp / Reflector
Module, 200 W (HPMA)
Lamp Type
Additional Accessories Sold Separately
LOCTITE LIGHT INTENSITY MONITOR
®
LOCTITE® ZETA® 7021 SPOT RADIOMETER
Item Number: 891494
Item Number: 98048
Digital light lntensity monitoring option
for Loctite® UV Wands 958216, 958228
and 958239 only.
Effective monitoring of UV wand curing
system performance. See page 114.
* Exact output measurement is dependent on the brand and calibration method of the meter used.
Spectral Output of Loctite® ZETA® 7740
100 Watt High Pressure Mercury Arc Lamp
Spectral Output of Loctite® ZETA® 7735
50 Watt High Pressure Mercury Arc Lamp
1.0
Relative Irradiance
Relative Irradiance
1.0
0.8
0.6
0.4
0.2
0.8
0.6
0.4
0.2
0
0
225
250
275
300
325
350
375
400
425
450
475
225
500
250
275
300
325
350
375
400
425
450
475
500
Wavelength in nm
Wavelength in nm
Spectral Output of Loctite® ZETA® 7760 Mercury Arc Bulb with
Optional Filter Kit 98598 to Optimize Tack-Free Surface Cure
Relative Output %
Relative Output %
Spectral Output of Loctite® ZETA® 7760 Mercury Arc Bulb
240
260
280
300
320
340
360
380
400
420
440
230
250
270
290
Wavelength in nm
For additional information and the full line of equipment, visit www.equipment.loctite.com.
310
330
350
370
390
410
430
Wavelength in nm
103
LIGHT CURE
Wand Systems
LOCTITE® INDIGO™ 7720 VISIBLE LIGHT WAND SYSTEM
Item Number: 98633
The Loctite® Indigo™ 7720 Visible Light Wand Curing System provides effective curing for larger bead sizes of our new Loctite®
Indigo™ visible light curing adhesives. This curing system utilizes a 100 watt, fully visible metal halide lamp system and provides
up to 1.5 W/ cm2 of visible light curing intensity. The system is designed to be constantly powered, providing for effective
continuous duty service. This light source uses a long life fiber optic light guide that significantly outlasts liquid- filled light
guides. The light guide is required and sold separately.
Features:
•
•
•
•
•
•
Output exceeds 1 W/cm2 for up to 3⁄ 4" diameter cure areas
Long life fiber optic light guide significantly outlasts liquid - filled light guides
Light guide is highly flexible and enhances ability to reach tough location cure areas
Contains a 100 watt, visible arc bulb that provides up to 2 times longer life than typical UV bulbs
Emits light only in the visible light range
Constant - on functionality ensures effective, continuous duty service
Theory of Operation
When the unit is switched on, electrical power is immediately
supplied to the lamp. It takes 3 to 5 minutes for the metal halide
lamp to come up to full power. A fiber optic light guide, sold
separately, is also required and inserted into the lamp iris
opening. The light guide focuses the lamp intensity down to a
specific diameter and provides the operator convenient and
effective control of curing visible adhesive joints up to 1" diameter.
The lamp system is designed to stay continuously on so there
is no need for further on/off activation.
INTENSITY VS. CURE AREA
Distance
Typical Cure Diameter
Typical Intensity*
0.25"
0.56"
1.6 W/cm 2
0.5"
0.75"
1.1 W/cm 2
TECHNICAL SPECIFICATIONS
Dimensions
* Exact output measurement is dependent on the brand and calibration method of
the UV meter, and the condition and straightness of the light guide used.
4.6" H x 7.25" W x 9.5" D
Weight
12 lbs.
Warm-Up Time
3 to 5 minutes
Power Supply
115 VAC; 50/60 Hz
Main Fuse
5 A, 250 V
Replacement Parts
Parts Included
98635 – 100 watt Metal Halide Bulb
(1) Indigo™ 7720 UV Wand System
(1) 100 W Metal Halide Bulb
(1) Line Cord
(1) Manual
Additional Accessories Sold Separately
98452 – Loctite® Safety
Glasses (Removes all
wavelengths 200 to 540 nm)
98634 – 6 mm D x 1000 mm
Fiber Optic Light Guide
1025264 – Loctite® Fiber Optic Light Guide Radiometer Adapter
104
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
LOCTITE® ZETA® 7735 UV WAND SYSTEMS
Item Numbers: 98317A and 958216
Wand Systems
The Loctite® ZETA® 7735 UV Wand Systems utilize a 50 watt mercury arc lamp with a universal power supply. The state - of - the -art
lamp with elliptical reflector and custom coating delivers unequaled spectral and optical performance in the 50 watt category.
These wand systems bridge the gap between low intensity and high intensity spot curing products. They are ideally suited for the
medium to low intensity requirements of the photo - optics and audiology industries. Other common uses are fillet curing, wire
tacking, and shallow potting. The system can be operated manually or in the timed mode and is capable of interfacing with a PLC.
Continuous lamp intensity monitoring is also available by selecting item 958216 and the required
Light Intensity Monitor item 891494. The light guides are also sold separately from
the base units. Light guide choices are highlighted below.
Features:
• 5 to 7 W/cm2 UV output
• 50 watt high pressure mercury arc lamp
• 2,000 hours of expected UV lamp life with
proper handling and maintenance
• Manual or timed shutter light exposure, 0 to 99.9 seconds
• Hour meter for monitoring accumulated lamp life
• Selector switch for either 110 or 230 VAC
Additional Features for Item 958216 when used in conjunction with 891494
• LED control display highlights relative intensity
changes in 10% increments
• Minimum required intensity can be programmed for a warning
or integrated to PLC for external alarm or shutdown condition
Theory of Operation
When the unit is switched on, the proper electrical power is immediately supplied to the lamp. It will take approximately five
minutes for the lamp to reach full power. Once the lamp has reached full power, the unit is ready to cure adhesive. The operator will
present the part under the end of the UV light guide. Curing will take place when the UV light is directed at the liquid adhesive.
Engaging the foot switch opens the shutter and UV energy produced by the lamp is immediately transmitted through the flexible
light guide. The end of the wand can be manually operated or mounted in a fixed position.
Light Guides Sold Separately
Descriptions
983677: Single end 5 mm diameter x 1,000 mm long
Light Guide
983684: Dual end 3 mm diameter x 1,000 mm long
Light Guide (initial purchase requires
951639 – Balancing Adapter)
951681: Single end 5 mm diameter x 1,500 mm long
Light Guide
Typical Light Guide Cure Areas
983677:
983684:
951681:
1⁄ 4"
to 1⁄ 2" diameter
1⁄ 8" to 1⁄ 4" diameter
1⁄ 4" to 1⁄ 2" diameter
TECHNICAL SPECIFICATIONS
Item Numbers
98317A / 958216
Power Supply
100/240 VAC; 50/60 Hz input
Power Protection
5 A / 250 V fuse
Auxiliary Control Voltage
3 A, 250 V
Dimensions
7.3" H x 11.1" W x 12.8" D
Weight
19.5 lbs.
Optimized Spectral Output Range
UVA, B, C
Replacement Bulb
(Item Number and Type)
Typical
UV Output
Characteristics UV Spectral Range
LOCTITE LIGHT INTENSITY MONITOR
®
Primary Peak
Parts Included
Item Number: 891494
90/265 VAC; 50/60 Hz input
Main Fuse
1 A, 250 V
Dimensions
5.5" H x 6.1" W x 6.8" D
Weight
Parts Included
98339 – Lamp/Reflector Module
50 watt HPMA UV Bulb
5 to 7 W/cm 2
(using 5 mm x 1,000 mm light guide)*
250 to 410 nm
365 nm
(1) Loctite® ZETA® 7735 UV Wand System
(1) Ultraviolet Protection Glasses
(1) Line Cord
(1) UV Lamp
(1) Foot Pedal
(1) Manual
TECHNICAL SPECIFICATIONS
Power Supply
12 VDC
Entry Fuse
98339 – 50 watt HPMA UV Bulb
Replacement Parts
Additional Accessories Sold Separately
98048 –
Loctite® ZETA®
7021 Spot Radiometer
(See page 114)
1 lbs.
(1) Intensity Monitor
(1) Sensor Input Cable
(1) Power Cord
(1) Manual
891494 –
Loctite® Light
Intensity Monitor –
for 958216 only
* Exact output measurement is dependent on the brand and calibration method
of the UV meter, and the condition and straightness of the light guide used.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
105
LIGHT CURE
Wand Systems
LOCTITE® ZETA® 7740 UV WAND SYSTEMS
Item Numbers: 98157A and 958228
The Loctite® ZETA® 7740 UV Wand Systems utilize a 100 watt high - pressure mercury arc lamp with a universal power supply
and a liquid - filled light wand. They can be operated manually or in the timed mode and are capable of interfacing with a PLC
controlled circuit. Continuous lamp intensity monitoring is also available by selecting item 958228 and the required Light Intensity
Monitor item 891494. The light guides are also sold separately from the base units. Light guide choices are highlighted below.
Features:
•
•
•
•
•
•
Highest output light intensity; 9 to 11 W/cm 2
Contains a high - pressure mercury arc lamp
2,000 hours of expected UV lamp life with proper handling and maintenance
Manual or timed shutter light exposure, 0 to 99.9 seconds
Hour meter for monitoring accumulated lamp life
Self - test diagnostics display message when a problem exists
Additional Features for Item 958228 when used in conjunction with 891494
• LED control display highlights relative intensity changes in 10% increments
• Minimum required intensity can be programmed for a warning
or integrated to PLC for external alarm or shutdown condition
Theory of Operation
When the unit is switched on, the proper electrical power is
immediately supplied to the lamp. It will take a few minutes for
the lamp to reach full power. The operator will manually or
automatically place the part under the end of the UV wand.
Curing will take place when the UV light is directed at the
liquid adhesive. Engaging the foot switch opens the shutter and
UV energy produced by the lamp is immediately transmitted
through the flexible light guide. The end of the wand can be
manually operated or mounted in a fixed position.
TECHNICAL SPECIFICATIONS
Light Guides Sold Separately
Item Numbers
Descriptions
983677: Single end 5 mm diameter x 1,000 mm long
Light Guide
983684: Dual end 3 mm diameter x 1,000 mm long
Light Guide (initial purchase requires
951639 – Balancing Adapter)
951681: Single end 5 mm diameter x 1,500 mm long
Light Guide
Typical Light Guide Cure Areas
983677:
983684:
951681:
1⁄ 4"
to 1⁄ 2" diameter
1⁄ 8" to 1⁄ 4" diameter
1⁄ 4" to 1⁄ 2" diameter
98157A / 958228
Power Supply
100/240 VAC; 50/60 Hz input
Power Protection
4 A / 250 V fuse
Auxiliary Control Voltage
Lamp Life
Warm-Up Time
5 minutes
Main Fuse
5 A, 250 V
Dimensions
7.3" H x 11.1" W x 12.8" D
Weight
19.5 lbs.
Optimized Spectral Output Range
UVA, B, C
Typical
UV Output
Characteristics UV Spectral Range
Primary Peak
LOCTITE® LIGHT INTENSITY MONITOR
Item Number: 891494
Power Supply
Main Fuse
1 A, 250 V
Dimensions
5.5" H x 6.1" W x 6.8" D
Weight
Parts Included
106
90/265 VAC; 50/60 Hz input
1 lbs.
(1) Intensity Monitor
(1) Sensor Input Cable
(1) Power Cord
(1) Manual
9 to 11 W/cm 2
(using 5 mm x 1,000 mm light guide)*
250 to 410 nm
365 nm
(1) Loctite® ZETA® 7740 UV Wand System
(1) Ultraviolet Protection Glasses
(1) Line Cord
(1) UV Lamp
(1) Foot Pedal
(1) Manual
Parts Included
TECHNICAL SPECIFICATIONS
12 VDC
Approximately 2,000 hours
984818 – 100 watt HPMA UV Bulb
Replacement Parts
Additional Accessories Sold Separately
98048 –
Loctite® ZETA®
7021 Spot Radiometer
(See page 114)
891494 –
Loctite® Light
Intensity Monitor –
for 958228 only
* Exact output measurement is dependent on the brand and calibration method
of the UV meter, and the condition and straightness of the light guide used.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
LOCTITE® ZETA® 7760 UV WAND SYSTEMS
Item Numbers: 98450 and 958239
Wand Systems
The Loctite® ZETA® 7760 UV Wand Systems utilize a 200 watt high pressure mercury arc lamp with a universal power supply and
a liquid - filled light wand. These systems have the highest intensity output for a Loctite® brand wand system by a factor of 2. The
Loctite® ZETA® 7760 UV Wand Systems can be operated manually or in the timed mode and are capable of interfacing with a PLC
controlled circuit. Continuous lamp intensity monitoring is also available by selecting item 958239 and the required Light
Intensity Monitor item 891494. The light guides are also sold separately from the base units.
Light guide choices are highlighted below.
Features:
• Our highest output light intensity wand. Typical initial
Intensity is 16 to 20 W/cm2
• Contains a high pressure mercury arc lamp
• 1,000 hours of expected UV lamp life with proper
handling and maintenance
• Manual or timed shutter light exposure, 0 to 99.9 seconds
• Hour meter for monitoring accumulated lamp life
• Self - test diagnostics displays message when a problem exists
Additional Features for Item 958239 when used in conjunction with 891494
• LED control display highlights relative intensity
changes in 10% increments
• Minimum required intensity can be programmed for a
warning or integrated to PLC for external alarm or
shutdown condition
Item Numbers
Theory of Operation
When the unit is switched on, the proper electrical power is
immediately supplied to the lamp. It will take a few minutes for
the lamp to reach full power. The operator will manually
or automatically place the part under the end of the UV wand.
Curing will take place when the UV light is directed at the liquid
adhesive. Engaging the foot switch opens the shutter and UV
energy produced by the lamp is immediately transmitted
through the flexible light guide. The end of the wand can be
manually operated or mounted in a fixed position.
Standard1
Enhanced UVC 2
Dimensions
3 mm x 1000 mm
5 mm x 1000 mm
5 mm x 1500 mm
3 mm x 1000 mm
5 mm x 1000 mm
5 mm x 1500 mm
Single Pole
N/A
983677
951681
N/A
97326
98543
Item Numbers
2 Pole
3 Pole
98450 / 958239
Power Supply
90/265 VAC; 50/60 Hz input
Power Protection
4 A / 250 V fuse
Auxiliary Control Voltage
24 VDC
Lamp Life
Approximately 1,000 hours
Warm-Up Time
5 minutes
Main Fuse
5 A, 250 V
Dimensions
8.3" H x 11.5" W x 13.4" D
Weight
19.5 lbs.
Optimized Spectral Output Range
UVA, B, C
Typical
Light Guide Options – UV wands
Description
TECHNICAL SPECIFICATIONS
UV Output
Characteristics UV Spectral Range
16 to 20 W/cm 2
(using 5 mm x 1,000 mm light guide)*
250 to 410 nm
Primary Peak
4 Pole
983684 2
98596 2
98597 2
•
•
•
•
•
•
97328 2
98593 2
98594 2
•
•
•
•
•
•
1. Enhanced UVC wands require optional filter kit (98598) to optimize tack-free
surface cure on the Loctite® ZETA® 7760. (sold separately)
2 Requires balancing adapter (951639) on initial setup.
• Multi-pole guides are only available with 3 mm diameter poles.
365 nm
(1) Loctite® ZETA® 7760 UV Wand System
(1) Ultraviolet Protection Glasses (1) Power Cord
(1) UV Lamp
(1) Foot Pedal (1) Manual
Parts Included
98451 – 200 watt HPMA UV Bulb
Replacement Parts
Additional Accessories Sold Separately
98048 –
Loctite® ZETA®
7021 Spot Radiometer
(See page 114)
891494 –
Loctite® Light
Intensity Monitor –
for 958239 only
* Exact output measurement is dependent on the brand and calibration method
of the UV meter, and the condition and straightness of the light guide used.
LOCTITE® LIGHT INTENSITY MONITOR
Item Number: 891494
TECHNICAL SPECIFICATIONS
Power Supply
1 A, 250 V
Dimensions
5.5" H x 6.1" W x 6.8" D
Weight
Parts Included
For additional information and the full line of equipment, visit www.equipment.loctite.com.
90/265 VAC; 50/60 Hz input
Main Fuse
1 lbs.
(1) Intensity Monitor
(1) Sensor Input Cable
(1) Power Cord
(1) Manual
107
LIGHT CURE
Cure Chambers &
Flood Systems
Cure Chambers & Flood Systems
Loctite® brand chamber and flood systems are modular low and medium intensity
ultraviolet and high intensity visible light emitting units designed for the batch curing
of light curing adhesives and coatings. Selection of a Loctite® brand chamber and flood
system is based on the required intensity of light and cure area.
C URE C HAMBERS
LOCTITE® UVALOC 1000 UV CURE CHAMBER
NEW
Item Number: 805741
The Loctite® UVALOC 1000 UV Cure Chamber, item 805741, is a high performance modular curing system consisting of a cure chamber,
lamp housing, and controller. The chamber has four rack levels to
accommodate a slide - in tray that allows for easy positioning of parts of
various heights and level of optimum exposure. The lamp is shielded by
a timed control shutter that eliminates UV exposure to operators during
loading or unloading of parts. A door safety switch prevents opening
while exposure is in progress.
Features:
• Typical UV irradiance is up to 110 mW/cm2, depending
upon selection of 4 - position rack height
• Dual power setting of 500 or 1000 watts permits curing
of temperature - sensitive parts without damage by heat
• Lamp intensity is continually monitored
• Low - level output condition can be established to insure optimal
curing performance and notification for lamp replacement
• Effective cure area of 6.3 inches wide by 6.3 inches deep (160 mm x 160 mm).
• Digital timer allows for setting exposure time from 3 seconds to
15 minutes in one - second increments
• Pneumatically - operated shutter prevents
TECHNICAL SPECIFICATIONS
UV exposure to operators
Input Voltage
240 VAC; 50/60 Hz
• Safety door interlock switch prevents
Pneumatic
Supply
Required
60 to 90 psi
opening of the door while the shutter is open
Pneumatic
Supply
Tubing
6 mm
• Standard lamp included is mercury vapor lamp;
Power Consumption
1,200 watts
365 nm wavelength
12.0" W x 29 1⁄ 4" H x 17.0" D
• Optional iron doped or
Dimensions Exterior of Unit
gallium doped lamps available
9.0" W x 12" H x 13 3⁄ 4" D
Cure Chamber
Theory of Operation
The operator places the part inside the chamber
and sets the exposure time. This cure time is
controlled by the built - in timer and can be
operated in a continuous or timed mode. The
operator then triggers the exposure cycle by a foot
switch, panel - mount start button, or PLC interface.
Upon completion of timer, the operator removes
the part from the chamber.
Parts
Included
6.3" W x 6.3" D
Cure Area
(1) Cure Chamber, Lamp Housing, and Controller
(1) UV Intensity Sensor and Built-In
Digital Intensity Display
(1) Connecting Cable (from controller to lamp housing)
(1) AC Power Cord with pig-tale wire ends
(1) Foot Switch
Replacement Bulb
98086 – Loctite®
ZETA® 7011-A
Dosimeter-Radiometer
(See page 113)
870097 – Iron Doped Lamp
108
870098 – 1,000 W Mercury Vapor
Additional Accessories Sold Separately
98452 – Safety Glasses
(protects from 200 to
540 nm wavelengths)
870096 – Gallium Doped Lamp
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
LOCTITE® ZETA® 7401 UV CHAMBER
Item Number: 98039
Cure Chambers &
Flood Systems
The Loctite® ZETA® 7401 UV Chamber provides a reliable and economical design for UV
curing and is well suited for most production operations. Excellent for use in confined bond
line applications, this medium intensity light source can be used for adhesive applications
where high intensity output is not necessary.
Features:
•
•
•
•
•
•
•
•
Contains a 4", 400 watt metal halide bulb
Designed to emit in the UVA region
Curing area of 8" x 8", and a maximum part height of 4"
Operator’s hands have no direct exposure to UV energy
1,000 hours of expected UV bulb life with proper handling and maintenance
Convenient pull - out drawer to process parts
Viewing window to observe assemblies in process
The work surface is covered by a special silicone rubber
pad to resist UV deterioration and chemical attack
Theory of Operation
Utilities
Spectral Output of a UV Metal Halide Bulb
120 VAC; 8 amps; 60 Hz
Lamp Type,
(Visible and UV enhanced)
100
Dimensions
90
Weight
80
Parts Included
39 lbs.
60
50
Replacement Parts
40
30
400 watt Metal Halide
11.5" H x 10.75" W x 20.1" D
70
Output
The unit is operated by
simply placing the
assembly into the cure
drawer, closing the
drawer, and allowing
exposure for the
desired time. A viewing
window allows
monitoring of the
curing process.
TECHNICAL SPECIFICATIONS
(1) ZETA® 7401 UV Chamber
(1) Pair Cotton Gloves
(1) UV Protective Eyewear
(1) Power Cord
(1) Manual
97246 – UV Lamp - 400 watt
985298 – Loctite® Silicone Work Surface
Additional Accessories Sold Separately
20
98086 –
Loctite® ZETA® 7011-A
Dosimeter-Radiometer
(See page 113)
10
0
200
300
400
500
600
Wavelength in nm
983050 – Loctite® Visible
Light Enhanced
Metal Halide Bulb
F LOOD S YSTEMS
Shown with
98420 – Optional
Shutter Assembly
PRODUCT
Loctite® ZETA® 7411-S UV Flood System
Loctite® Indigo™ 7418
Visible Light Flood System
Item Number
Loctite® ZETA® 7420
Visible Light Flood System
98413
971031
98060 / 98182*
8" x 8"
2" x 4"
12" x 12" Typical
Metal Halide
Visible Arc Lamp
Visible Arc Lamp
Medium
Low
High
Lamp Power
400 W
400 W
1,500 W
Optional Shutter Assembly
98420
N/A
N/A
UVA
Proprietary
Visible Blue and Green
97246 – Loctite® UV Lamp - 400 Watt Metal Halide
983050 – Loctite® Visible Light Enhanced
Metal Halide Bulb
971028 – Visible Arc Lamp, 400 W
985940 – Visible Arc Lamp, 1,500 W
988159
971024
985942
Useful Cure Area
Lamp Type
Output Intensity
Optimized Spectral Output Range
Replacement Bulbs
(Item Number / Type)
Replacement Filter Glass
* 98182 – Loctite ZETA 7420, is a 230 VAC/50 Hz system.
®
®
For additional information and the full line of equipment, visit www.equipment.loctite.com.
109
LIGHT CURE
Cure Chambers &
Flood Systems
LOCTITE® ZETA® 7411-S UV FLOOD SYSTEM
Item Number: 98413
The Loctite® ZETA® 7411- S UV Flood System is designed for use in a wide range of
bonding, potting, tacking and sealing applications. Because of its reliability and
simplicity, it is well suited for most production operations. The Loctite® ZETA®
7411- S can accept multiple part sizes. An optional timed control shutter
(as displayed) or visible enhanced metal halide lamp are also available.
Features:
•
•
•
•
•
•
•
Contains a 4", 400 watt metal halide bulb**
Optimized to emit in the UVA region
Typical curing area of 8" x 8"
1,000 hours of expected UV bulb life with proper handling and maintenance
Power supply can be separated from the lamp base assembly
Lamp height is adjustable to a maximum height of 11 3⁄ 4" from pad
Contains a glass filter to reduce the short and
medium wavelength lamp emissions
• The work surface is covered by a special silicone rubber pad
to resist UV deterioration and chemical attack
Shown with
98420 – Optional
Shutter Assembly
Theory of Operation
The operator places the assembly to be bonded into the cure area, allows the
assembly to be exposed for the proper time, and manually removes the cured
assembly. In addition, the light source can be pulled from the
power supply and mounted over a conveyor belt for a more
automated use of the equipment.
TECHNICAL SPECIFICATIONS
Utilities
120 VAC; 8 amps; 60 Hz
Lamp Type,
(Visible and UV enhanced)
** See page 109 for spectral output chart for a metal halide bulb.
400 watt Metal Halide
Dimensions
27.0" H x 12.7" W x 14.0" D
Weight
For proper eye protection, use
Loctite® brand ultraviolet
safety glasses.
Item 97210
Item 98452
37 lbs.
Parts Included
(1) Reusable Shipping Box Foam Packaging
(1) Height Adjustment for Reflector Housing
(1) Reflector Housing with Flexible UV
Curtain Shield Attached
(1) UV Protective Eyewear (1) Cotton Gloves
(1) UV Power Supply
(1) Power Cord
(1) Manual
Replacement Parts
984967 – Loctite® Replacement Silicone Work Surface
988159 – Loctite® Replacement Filter Glass
988173 – Loctite® Replacement Light Blocking Curtain
97246 – Loctite® UV Lamp - 400 watt Metal Halide
983050* – Loctite® Visible Light Enhanced Metal Halide Bulb
Additional Accessories Sold Separately
98086 –
Loctite® ZETA® 7011-A
Dosimeter-Radiometer
(See page 113)
98420 – Loctite® Time Controlled Shutter
985022 – Loctite® Optional
Head Extension Cable
* Optional replacement bulb.
110
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
Cure Chambers &
Flood Systems
LOCTITE® INDIGO™ 7418 VISIBLE LIGHT FLOOD SYSTEM
Item Number: 971031
The Loctite® Indigo™ 7418 Visible Light Flood System, item 971031,
is a unique visible light flood system designed for curing Loctite®
3552™ and 3553™ Indigo™ Visible Light Cure Adhesives. This can
be used as a high intensity, benchtop modular light cure system.
The lamp can be mounted over existing material handling systems
such as conveyors. These units can also be stacked side - by - side
to increase the effective curing area. This unit includes an
operations manual, the lamp with reflector housing, and
associated power cords.
Features:
• Contains a 4 inch, 400 watt visible arc bulb
• Optimized to emit in the visible region
(greater than 400 nm)
• Typical curing area of 2" by 4"
• Average irradiance of 225 mW/cm2 at a 2" distance
• 2000 hours of expected bulb life with proper handling
• Protective glass to shield the light source
from direct contact
• Allows curing through colored substrates
• Can achieve cure through depths over 1⁄ 2"
TECHNICAL SPECIFICATIONS
Theory of Operation
Utilities
115/230 VAC; 50/60 Hz
The operator places the part under the lamp for the
pre - determined exposure time. Upon completion of the
exposure time, the operator removes the part from
under the lamp.
Dimensions
15.0" L x 5.25" x 8.0" H
Lamp Weight
8.5 lbs.
Ballast Weight
7.5 lbs.
Lamp Type
400 watt Visible Arc
Parts Included
(1) Operations Manual
(1) Power Cord
Replacement Parts
(1) Lamp with Reflector Housing
(1) Ballast Connection Cord
971023 – Loctite® Replacement Ballast
971024 – Loctite® Replacement Filter Glass
971028 – Loctite® 400 Watt Visible Arc Bulb
Additional Accessories Sold Separately
98089 – Loctite® ZETA®
7011-V Dosimeter
(See page 113)
98452 – Safety Glasses
(protects from 200 to
540 nm wavelengths)
984070 – Pair of Cotton Gloves
For additional information and the full line of equipment, visit www.equipment.loctite.com.
111
LIGHT CURE
Cure Chambers &
Flood Systems
LOCTITE® ZETA® 7420 VISIBLE LIGHT FLOOD SYSTEM
Item Numbers: 98060 and 98182
The Loctite® ZETA® 7420 Visible Light Flood Systems (98060 with 120 VAC and
98182 with 230 VAC) represent an innovative, extremely cost- effective
approach to “high-intensity” curing. These systems are designed for use in
a wide range of bonding, potting, tacking and sealing applications. Their
reliability and simplicity are well suited to a variety of production
operations. Most Loctite® brand light cure adhesives with dual cure
capability (UV/Visible) are compatible with these systems, including
Loctite® brand 3103™, 3105™, 3106™, 3107™, 3494™, 3525™,
3526™, 4304™ and 4305™ Light Curing Adhesives.
Features:
•
•
•
•
High intensity 1,500 watt bulb – item number 985940
Optimized to emit in the visible blue and green region
Typical curing area of 12" x 12"
1,000 hours of expected bulb life with proper handling
and maintenance
• Lamp and power supply are separate for
installation flexibility
• Lamp includes mounting chains for easy
attachment to customer fixtures
• Contains a glass filter to reduce the short
and medium wavelength lamp emissions
TECHNICAL SPECIFICATIONS
98060 – 120 VAC;
13.5 amps, 60 Hz
Utilities
Theory of Operation
The operator places the bonded assembly into the cure area,
allows the assembly to be exposed for the proper time, and
manually removes the cured assembly. In addition, the light
source can be pulled from the power supply and mounted
over a conveyor belt for a more automated use of the equipment.
Shielding for the high-intensity visible light must be provided
by the customer.
Lamp Type,
(Visible and UV enhanced)
Dimensions
Weight
Parts Included
Replacement Parts
98182 – 230 VAC;
7.0 amps, 50 Hz
Visible Arc Lamp
Lamp Head: 9.5" H x 23.6" W x 20.75" D
Power Supply: 8.95" H x 7.75" W x 14.9" D
80 lbs.
(1) Lamp with Bulb and Filter Glass
(1) Power Supply
(1) Manual
985934 – Loctite® Replacement Ballast (120 VAC; 60 Hz)
985940 – Loctite® Visible Arc Bulb, 1,500 watt
985942 – Loctite® Replacement Safety Glass, Tempered
Additional Accessories Sold Separately
98089 –
Loctite® ZETA® 7011-V Dosimeter-Radiometer
(See page 113)
112
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
Light Meters
Light Meters
Decreased radiant power related to the degradation of UV lamps, light guides and reflectors results in declines
in process efficiency or incomplete curing of UV light curing products. Loctite® ZETA® Light Meters are used to
check the intensity of ultraviolet light emitted from a light source. These units are useful for quality measures,
maintenance, and troubleshooting of ultraviolet emitting light sources. Selection of a Loctite® ZETA® Light
Meter is based on the type of light source that is required to be measured.
LOCTITE® ZETA® 7011-A DOSIMETER-RADIOMETER Item Number: 98086
LOCTITE® ZETA® 7011-V DOSIMETER-RADIOMETER Item Number: 98089
The Loctite® ZETA® 7011- A and 7011- V Dosimeter-Radiometers are self-contained, electro-optic meters
that measure and display total energy ( J/cm2) and irradiance (W/cm2). They are designed to withstand
the extremes of UV light and high temperature that are part of the UV curing environment. The
carefully designed optical sensing system measures only certain wavelengths, rejecting those that are
not relevant to the process. The output of the sensing system is converted to digital form and displays a
liquid crystal readout. The Loctite® ZETA® 7011- A measures across the ultraviolet spectrum from 320 to
400 nanometers (UVA region). The Loctite® ZETA® 7011- V measures across the ultraviolet spectrum from
350 to 500 nanometers (UVV region). These units are designed to monitor the performance
of a light curing system.
Features:
• Measures energy and irradiance lamp
performance to determine lamp efficiency
• Establishes energy and irradiance level for
proper curing when implementing a new process
• Calibration is required only once per year
• Meets ISO - 9000 requirements by providing
a device that will allow for recording
of lamp performance data
• Dual display of energy and irradiance
allows for convenient, same screen viewing
• Centrally located sensor allows for easy alignment
• Calibration is traceable to the
National Institute of Standard
Technology (NIST)
Theory of Operation
An operator will turn the radiometer
on, reset the unit, and place the eye
of the unit under the light source for
no more than 5 seconds. The reading
will be displayed on the liquid
crystal readout.
Operating
Temperature
Automatic Shut-off
TECHNICAL SPECIFICATIONS
0°C to 75°C internal temperature
Note: tolerates much higher external temperatures for short periods;
audible alarm indicates when temperature is too high.
5 minutes (if no buttons are pressed)
Display
Measured Spectral
Range
Dimensions
4 digit LCD
98086 – ZETA® 7011-A
320 to 400 nm
4" L x 4" W x 0.52" D
Weight
Power Source
Typical Battery Life
Case Material
Used To Measure
Output of
Parts Included
98089 – ZETA® 7011-V
350 to 500 nm
8.6 oz. (245 g)
Two AAA alkaline batteries (not included)
3,000 readings or 2,000 hours
Aluminum, stainless steel
98086: Chambers,
98089: Chambers, Conveyors,
Conveyors, Flood Systems
Flood Systems, LED Light Sources
(1) ZETA® 7011-A or 7011-V Dosimeter-Radiometer
(1) Manual
Additional Accessories Sold Separately
1007349 – Loctite® CureJet™ LED Dosimeter Adapter [Requires 98089] (See page 102)
98453 – Adapter for LED intensity measurement
For additional information and the full line of equipment, visit www.equipment.loctite.com.
113
LIGHT CURE
Light Meters
LOCTITE® ZETA® 7021 SPOT RADIOMETER
Item Number: 98048
The Loctite® ZETA® 7021 Spot Radiometer is a self - contained, electro - optic instrument designed to measure and display
the UV irradiance emitted by a UV spot curing system. The units displayed are watts per square centimeter (W/cm2).
Decreased radiant power related to the degradation of UV lamps, light guides, and reflectors can
result in declines in process efficiency or incomplete curing of UV light curing products. The
Loctite® ZETA® 7021 is designed to provide the operator with instant feedback as to the
performance of the spot curing system. It accepts both 3 mm and 5 mm diameter wands.
The unique detachable sensor head requires re-calibration only once per year (vs. every
6 months for competitive models). Requires a 9 volt alkaline battery (not included).
Features:
•
•
•
•
•
•
•
Measures UV wand curing system performance
Measures UV lamp performance
Measures light guide degradation
Optimizes dual light guide balancing
Determines proper UV intensity required for curing various materials
Meets ISO - 9000 requirements
Calibration is traceable to the National Institute of Standard Technology (NIST)
Theory of Operation
An operator will place the UV wand in the opening of the sensor head.
The light to be measured will be emitted for approximately 2 to 4 seconds.
The reading will immediately be displayed.
TECHNICAL SPECIFICATIONS
Radiant Power Range
0 to 19.99 W/cm 2
Resolution
0.01 W/cm 2
Accuracy
± 5% typical / ± 10% maximum
Display
1.0" W x 0.5" H LCD
Reading Exposure Time
2 to 4 seconds
Spectral Range
280 to 400 nm (UVA & B region)
Power Source
9 volt alkaline battery (not included)
Dimensions
3.0" H x 2.5" W x 1.2" D
Weight
0.4 lbs.
Used to Measure Output of
Parts Included
3 mm and 5 mm diameter Wands
(1) ZETA® 7021 Spot Radiometer
(1) Manual
Additional Accessories Sold Separately
98633 / 98317A / 98157A / 98450 – Loctite® ZETA® or Indigo™ UV Wand Systems
114
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
Cure Conveyors
Cure Conveyers
Loctite® brand cure conveyors are used for continuous or batch processing of assemblies.
Each conveyor has a unique set of features designed to meet the challenges of benchtop
curing of light curing adhesives and coatings. Selection of a Loctite® brand cure
conveyor is based on the part size, and the required lamp for optimum cure.
LOCTITE® ZETA® 7415 UV BENCHTOP CONVEYOR
Item Number: 98003
The Loctite® ZETA® 7415 UV Benchtop Conveyor offers variable speed adjustment for low to medium
volume production and is designed for use with an electrodeless bulb and a parabolic reflector to create
a uniform cure area. The lamp assembly, conveyor, and power supply are ordered separately. The system
can be integrated into an automatic or semi - automatic production line for cure - on - demand assembly.
Features:
• Conveyor speeds from 3.3 to 23 feet
per minute or 0.3 to 7.2 feet per minute
• Typical curing area width of 6 inches
• Lamp orientation and height are
adjustable for variable cure focal points
• Integrated modular blower
for lamp cooling
Theory of Operation
An operator will assemble the desired parts
with a light curing adhesive or sealant,
place the assembly on the conveyor with a
preset belt speed and lamp height, and allow
the assembly to pass through the conveyor to the
other side, where the assembly should be removed.
TECHNICAL SPECIFICATIONS
Conveyor Utilities
98004* Power
Supply Utilities
208 VAC single phase; 18 amps; 50/60 Hz
98005* Power
Supply Utilities
240 VAC single phase; 18 amps; 50/60 Hz
Maximum Part Size
98086 – Loctite®
ZETA® 7011-A
Dosimeter-Radiometer
98089 – Loctite®
ZETA® 7011-V
Dosimeter-Radiometer
7.5" W x 3" H
Conveyor Size
27.4" H x 42" W x 20" D
Conveyor Weight
85 lbs.
Power Supply Size
8" H x 19.9" W x 23" D
Useful Cure Area
6" x 6"
Optimized Spectral
Output Range
UVA, B, C*
®
Parts Included
Additional Accessories Sold Separately
117 VAC single phase, 1 amp, 50 to 60 Hz or can
be configured for 230 VAC single phase
®
(1) Loctite ZETA 7415 UV Benchtop Conveyor*
(1) Ultraviolet Protection Glasses
(1) Manual
983466 – Loctite® Air Deflection Kit, High Grade Quartz
983465 – Loctite® Sight Shield, Snap In, Tunnel Style
983464 – Loctite® Sight Shield, Snap In, Box End Style
983462 – Loctite® Exhaust Plenum
983471 – Loctite® Fusion V Bulb - 300 W/in.
983469 – Loctite® Fusion D Bulb - 300 W/in.
983470 – Loctite® Fusion H Bulb - 300 W/in.
* The lamp assembly is sold separately; see the Light Sources section for more details on pages 117-118.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
115
LIGHT CURE
Cure Conveyers
LOCTITE® ZETA® 7610 UV BENCHTOP CONVEYOR
Item Number: 98588
The Loctite® ZETA® 7610 is a benchtop, ultraviolet curing conveyor used to
cure light cure adhesives and coatings. This conveyor has a medium pressure
mercury arc lamp which produces high - intensity ultraviolet energy in the
UVA, UVB, and UVC spectral region. This system can be integrated into an
automatic or semi - automatic production line for cure - on - demand assembly.
Features:
• 6 inch, medium pressure mercury arc lamp
• Lamp height can be adjusted to vary intensity
• Variable bulb wattage: 150 or 300 watts per inch to
accommodate heat sensitive applications
• Optimized to emit in the UVA, UVB, and UVC regions
• Typical curing width 6 5⁄8" with 6" maximum part height
• 1,000 hours of expected UV bulb life with
proper handling and maintenance
• Variable conveyor speed up to 56 feet per minute
• Vacuum hold down for lightweight substrates
Theory of Operation
The Loctite® ZETA® 7610 is a benchtop, ultraviolet curing
conveyor used to cure light cure adhesives and coatings.
This conveyor has a medium pressure mercury arc lamp which
produces high - intensity ultraviolet energy in the UVA, UVB, and
UVC spectral region. This system can be integrated into an
automatic or semi - automatic production line for cure - on demand assembly.
TECHNICAL SPECIFICATIONS
Input Power Required
120 VAC; 1 phase; 50/60 Hz; fused for 21 amps
Power Consumption at
300 W/in. Setting
Approximately 2,200 watts
Belt
304 stainless steel wire
Maximum Part Weight:
3 pounds
1 to 20.0 inch/second
Belt speed range
(Minimum to Maximum)
60 to 1,200 inch/minute
0 to 56 feet/minute
Lamp
The Electromagnetic Spectrum
Maximum Part Cross Section
Dimensions
10 4
100
1
UV
Gamma Rays
10 -2
10 -1
Visible
Light
10 1
10 -5
1/100
Infra-Red
10 3
eV
Radiation
Energy
Microwaves
10 4
VUV
100
116
UVC
200
UVB
300
UV
UVA
Blue
400
Weight
Parts Included
Radiowaves
10 5 nm
Wavelength
Visible
Light
1,800 watt Medium Pressure Mercury Arc Lamp
Replacement Bulb
6" H x 6.625" W
31.6" H x 31.8" W x 23.8" D
145 lbs.
(1) Loctite® ZETA® 7610 UV Benchtop Conveyor
(1) Ultraviolet Lamp
(1) Ultraviolet Protection Glasses
(1) Pair of Cotton Gloves (1) Manual
98649 – Replacement 6" UV Bulb - 300 W/in.
Additional Accessories Sold Separately
Green
500
Yellow
600
Red
700nm
98086 – Loctite® ZETA® 7011-A
Dosimeter-Radiometer
For additional information and the full line of equipment, visit www.equipment.loctite.com.
LIGHT CURE
Light Sources
Light Sources
Our light sources and power supplies provide high intensity ultraviolet light for curing
light cure adhesives and coatings. These units are designed to be integrated into a
Loctite® brand conveyor system, or used when the end user provides the conveyor and
shielding requirements. Selection of a light source and power supply is based on the
bulb type, electrical requirements, and the desired part movement.
LOCTITE® ELECTRODELESS LAMP ASSEMBLY AND POWER SUPPLY
Item Numbers: 98004 – 208 VAC single phase, 10 amps, 50/60 Hz
Item Numbers: 98005 – 240 VAC single phase, 10 amps, 50/60 Hz
The Loctite® Electrodeless Lamp Assembly comes equipped with a long life 6 inch “H” bulb. The light
source is compatible with “D”, “V”, “H” and “H+” bulbs to tailor the spectral output of the light to the
application. Selection of the 98004 or 98005 is based on the electrical capabilities available to the end
user. The Loctite® Electrodeless Lamp Assembly is typically used with the Loctite® ZETA® 7415 UV
Benchtop Conveyor.
Features:
• Designed for use with the Loctite® ZETA® 7415 UV Benchtop Conveyor
• Electrodeless bulb technology provides high intensity output
• The system is shipped standard with an “H” bulb, but will accept “D”, “V” or
“H+” bulbs to fine tune lamp spectral output
• 5,000 hours of expected UV bulb life of the “H” bulb, with proper handling and maintenance
• High UV output with low IR output results in less heat to the substrate
Theory of Operation
An operator will assemble parts with
a light curing adhesive or coating and
manually or automatically place the
part under the lamp for cure. Shielding
is obtained through the use of this
assembly with a Loctite® ZETA® 7415
Benchtop Conveyor. If used elsewhere,
shielding must be provided by
the customer.
TECHNICAL SPECIFICATIONS
Spectral Output of “H” Bulb
98004
208 VAC single phase;
18 amps; 50/60 Hz
98005
240 VAC single phase;
18 amps; 50/60 Hz
Power Supply
Watts per inch
20
Lamp
16
12
19.9" H x 6.6" W x 10.3" D
(1) Fusion Lamp Assembly and Power Supply
(1) Manual
Parts Included
8
Replacement Bulb
983470 – Fusion H Bulb - 300 W/in.
Additional Accessories Sold Separately
4
0
Fusion H Bulb - 300 W/in.
Dimensions
200
250
300
350
Wavelength in nm
400
450
98086 – Loctite®
ZETA® 7011-A
DosimeterRadiometer
For additional information and the full line of equipment, visit www.equipment.loctite.com.
983471 –
Fusion V Bulb - 300 W/in.
983469 –
Fusion D Bulb - 300 W/in.
983470 –
Fusion H Bulb - 300 W/in.
117
LIGHT CURE
Light Sources
LOCTITE® HIGH INTENSITY ULTRAVIOLET SOURCES
Item Numbers: 980160 and 982440
The Loctite® High Intensity Ultraviolet Sources are designed for a wide range of applications using ultraviolet curing adhesives and
coatings. With the proper shielding, cooling and venting (not included with this product), this light source can be integrated into
both prototype and production applications. This unit is designed specifically for the user who wants to integrate their own
shielding, cooling, venting and mounting systems into a production line. A 220 VAC, 50 Hz unit is available as item 982440.
Features:
•
•
•
•
•
Contains a 5 inch, 300 watts/inch medium pressure mercury vapor bulb – Item Number 980161
Variable bulb wattage: 200 or 300 watts/inch
Designed to emit in the UVA and UVB regions
Typical curing area of 4.5" x 6"
1,000 hours of expected UV bulb life with proper
handling and maintenance
Theory of Operation
To assemble a component with a UV curing adhesive or coating,
place and remove the part manually or automatically under the
light source. The customer will provide their own mounting,
shielding, cooling, and venting for this unit.
Output UV in W
Spectral Output of a Medium Pressure Mercury Arc Bulb
100
90
80
70
60
50
40
30
20
10
TECHNICAL SPECIFICATIONS
Power Supply
Power Consumption
Lamp
180 200 220 240 260 280 300 320 340 360 380 400 420 450
Wavelength in nm
Item 98452
115 VAC; 60 Hz; 15 amp
982440
220 VAC; 50 Hz; 7.5 amp
2,000 Watts
300 watt Medium Pressure Mercury Arc Lamp
Lamp Unit Size
15.18" L x 8.7" W x 7.4" H
Power Supply Size
15.0" L x 14.7" W x 12.1" H
Lamp Unit Weight
9 lbs.
Power Supply Weight
45 lbs.
Parts Included
For proper eye protection, use
Loctite® brand ultraviolet
safety glasses.
980160
Replacement Bulb
(1) High Intensity UV Source
(1) Ultraviolet Protection Glasses
(1) Manual
980161 – Replacement 5" UV Bulb - 300 W/in.
Additional Accessories Sold Separately
98086 – Loctite® ZETA® 7011-A
Dosimeter-Radiometer
Item 97210
118
For additional information and the full line of equipment, visit www.equipment.loctite.com.
INDEX
Index
ITEM
NUMBER PRODUCT NAME
39633
39635
46551
74126
75326
97001
97002
97006
97007
97010
97017
97020
97042
97101
97111
97112
97113
97114
97115
97116
97118
97119
97120
97123
97130
97131
97132
97135
97136
97141
97200
97201
97207
97208
97210
97211
97215
97216
97220
97221
97222
97223
97224
97225
97226
97227
97228
97229
97230
97231
97232
97233
97234
97235
97236
97238
97239
97240
97242
97244
97245
97246
97248
97249
97251
97254
97261
97262
97263
97264
97268
97269
97271
97291
97293
97294
97295
97326
97328
97511
97541
PAGE NUMBER
Loctite® 400 ml Mix Nozzle for 39635 Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Fixmaster® Rapid Rubber Repair Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28
Loctite® 404™ Quick Set™ Instant Adhesive, General Purpose . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® Water Proofing Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® Clean-Up Solvent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® 250 ml Hand Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 24
Loctite® 300 ml Pneumatic Cartridge Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 29
Loctite® Precision Syringe Dispensing System . . . . . . . . . . . . . . . . . .5, 11, 12, 87, 88, 89, 90, 91
Loctite® Integrated Semi-Automatic
Dispenser, 0 to 100 psi . . . . . . . . . . . . . . . . .15, 19, 59, 61, 65, 66, 67, 68, 71, 87, 88, 89, 90, 91
Loctite® Integrated Semi-Automatic
Dispenser, 0 to 15 psi . . . . . . . . . . . . . . . . . .15, 19, 59, 61, 65, 66, 67, 68, 71, 87, 88, 89, 90, 91
Loctite® Integrated Semi-Automatic Dispenser
with Low Level Sensor, 0 to 100 psi . . . . . . .15, 19, 59, 61, 65, 66, 67, 68, 71, 87, 88, 89, 90, 91
Loctite® Integrated Semi-Automatic Dispenser
with Low Level Sensor, 0 to 15 psi . . . . .15, 16, 19, 59, 61, 65, 66, 67, 68, 71, 87, 88, 89, 90, 91
Loctite® 50 ml Dual Cartridge Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 26
Loctite® Digital Dispense Controller . . . . . . . . . . . . . . . . . . . . . .15, 18, 59, 61, 65, 66, 67, 68, 71
Loctite® Hand Held Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 60, 63
Loctite® Hand Held Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 61, 63
Loctite® Stationary Applicator Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 65, 73, 77, 79
Loctite® Stationary Applicator Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 65, 73, 77, 79
Loctite® Electric Rotorspray for use with 97123 . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 16, 65, 68
Loctite® Hand Held Pneumatic Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 61, 63
Loctite® Advancing Slide for use with 97123, 50 mm stroke . . . . . . . . . . . . . . . . . . . . .15, 16, 68
Loctite® Advancing Slide for use with 97123, 100 mm stroke . . . . . . . . . . . . . . . . . . . .15, 16, 68
Loctite® Air Filter and Regulator for 97123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Single Channel Automatic Controller . . . . . . . . . . . . . . .15, 16, 59, 65, 66, 67, 68, 71, 79
Loctite® LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 59, 63
Loctite® Vari-Drop™ Applicator with Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58, 62, 63
Loctite® Vari-Drop™ Applicator without Tubing . . . . . . . . . . . . . . . . . . . . . . . . .58, 62, 63, 84, 85
Loctite® Diaphragm Valve, 2 mm Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 68, 73
Loctite® Diaphragm Valve, 3 mm Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 68, 73
Loctite® Posi-Link™ 200-400 Static Mixer Pinch Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . .31, 84
Loctite® Valve Body Adapter - for 98009 and 98013 dispense valves . . . . . . . . . . . . . . . . . . . .79
Loctite® Replacement Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 101
Loctite® 10 ml Clear Syringe Barrel Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Loctite® 10 ml Syringe Air Line Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 66, 83
Loctite® Ultraviolet Safety Glasses, Grey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 103, 110
Loctite® In-Line Flow Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 79
Loctite® Cartridge-Syringe Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 10 ml Syringe Starter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 83
Loctite® 3/8" Feed Line Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60, 61, 62, 84
Loctite® 16 Gauge, Grey, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 18 Gauge, Green, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 20 Gauge, Pink, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 22 Gauge, Blue, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 15 Gauge, 1/2", Stainless Steel, Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 18 Gauge, 1/2", Stainless Steel, Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 20 Gauge, 1/2", Stainless Steel, Pink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 25 Gauge, 1/2", Stainless Steel, Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 15 Gauge, Amber, Helical Thread, flexible polypropylene . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 18 Gauge, Green, Helical Thread, flexible polypropylene . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 20 Gauge, Pink, Helical Thread, flexible polypropylene . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 25 Gauge, Red, Helical Thread, flexible polypropylene . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Luer-Lok® Adapter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 84
Loctite® Replacement Finger Level for 97111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Replacement Actuator for 97112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Replacement Actuator for 97116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® 25 Gauge, Stainless Steel, PTFE Lined, ID 0.58 mm, Pink . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Replacement Shut-Off Valve Assembly for 97113 . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Replacement Shut-Off Valve Assembly for 97114 . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® 30 ml Clear Syringe Barrel Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 83
Loctite® 55 ml Syringe Air Line Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 66, 83
Loctite® Replacement UV Lamp for 98027 or 98039 – 400 W/in. . . . . . . . . . . . . . . . . . .109, 110
Loctite® Dispense Needle Tip Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Vari-Drop™ Applicator Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 85
Loctite® Replacement Rupture Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Diaphragm Valve – Actuator Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® 15 Gauge, High Density Polyethylene, I.D. 1.25 mm, White . . . . . . . . . . . . . . . . . . . . .81
Loctite® Needle Assortment Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62, 81
Loctite® 10 ml Black Syringe Barrel Kit for UV Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Loctite® 30 ml Black Syringe Barrel Kit for UV Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Loctite® Diaphragm Valve Shut-Off – 2 mm replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Diaphragm Valve Shut-Off – 3 mm replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Diaphragm Replacement Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Replacement Actuator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Finger Switch, LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Loctite® 30 ml Syringe Starter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 83
Loctite® Valve Body Adapter - for 97113 and 97114 dispense valves . . . . . . . . . . . . . . . . . . . .79
Loctite® UV Single Light Guide, Enhanced UVC, 5 mm x 1000 mm . . . . . . . . . . . . . . . . . . . . .107
Loctite® UV DUAL Light Guide, Enhanced UVC, 3 mm x 1000 mm . . . . . . . . . . . . . . . . . . . . . .107
Loctite® Tri-Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Replacement Tube Inserts (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
ITEM
NUMBER PRODUCT NAME
97902
97960
97970
97972
97973
97999
98003
98004
98005
98009
98011
98012
98013
98022
98026
98033
98034
98035
98036
98037
98039
98040
98041
98042
98043
98048
98049
98050
98060
98061
98062
98063
98064
98065
98066
98067
98068
98069
98070
98071
98073
98074
98079
98080
98082
98083
98084
98085
98086
98089
98090
98091
98094
98099
98100
98101
98102
98103
98104
98105
98114
98115
98122
98125
98126
98127
98128
98129
98130
98131
98132
98133
98134
98135
98136
98137
98138
98139
98140
98141
98142
98143
98144
98145
98146
For additional information and the full line of equipment, visit www.equipment.loctite.com.
PAGE NUMBER
Loctite® Repair Kit for LV Hand Held Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Pneumatic Tubing, 4 mm OD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® 3/8" Black PTFE Lined Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 1/4" Black PTFE Lined Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Pneumatic Tubing, 6 mm OD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Replacement Valve Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® ZETA® 7415 UV Benchtop Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 115
Fusion 208V Lamp Assembly and Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 117
Fusion 240V Lamp Assembly and Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 117
Loctite® Light Cure Dispense Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 67, 73, 77, 79
Loctite® Hysol™ Reactive Urethane Cartridge Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . .43, 47
Loctite® Cartridge Pre-Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47, 49
Loctite® Cyanoacrylate Dispense Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 67, 73, 79
Loctite® 300 ml Cartridge Pusher . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 21, 61, 62, 65, 67, 71
Loctite® 30 ml Manual Syringe Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 25
Loctite® Hysol™ 075 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 45
Loctite® Hysol™ 075-LT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 45
Loctite® Hysol™ 175 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 47
Loctite® Hysol™ 175-AIR Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 46
Loctite® Hysol™ 175-SPRAY Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 46
Loctite® ZETA® 7401 UV Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 109
Loctite® Hysol™ 175-AIR-HT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 46
Loctite® Hysol™ 175-SPRAY-HT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 46
Loctite® Hot Melt Bench Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 46, 48
Loctite® Hot Melt Pneumatic Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 46, 48
Loctite® ZETA® 7021 Spot Radiometer . . . . . . . . . . . . . . . . . . . . . . .99, 103, 105, 106, 107, 114
Loctite® Foot Pedal Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 12
Loctite® Foot Pedal Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 12
Loctite® ZETA® 7420 Visible Light Flood System, 120 VAC . . . . . . . . . . . . . . . . . . . .99, 109, 112
Loctite® 16 Gauge, Grey, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 18 Gauge, Green, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 20 Gauge, Pink, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 22 Gauge, Blue, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 15 Gauge, 1⁄2", Stainless Steel, Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 18 Gauge, 1/2", Stainless Steel, Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 20 Gauge, 1/2", Stainless Steel, Pink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 25 Gauge, 1/2", Stainless Steel, Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 15 Gauge, Amber, Helical Thread, Flexible Polypropylene . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 18 Gauge, Green, Helical Thread, Flexible Polypropylene . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 20 Gauge, Pink, Helical Thread, Flexible Polypropylene . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 25 Gauge, Red, PTFE Lined, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 15 Gauge, White, HD Polyethylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Shot Miser™ Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 15, 18, 59, 68
Loctite® 22 Gauge, 1/2", Stainless Steel, Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 25 Gauge, Red, Helical Thread, Flexible Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Fluorescence Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Loctite® Micro Needle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 66, 73
Loctite® Shot Miser™ Dispense Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 64, 71, 74
Loctite® ZETA® 7011-A Dosimeter-Radiometer . . . . .99, 108, 109, 110, 113, 115, 116, 117, 118
Loctite® ZETA® 7011-V Dosimeter-Radiometer . . . . . . . . .99, 100, 101, 102, 111, 112, 113, 115
Loctite® Shot Miser™ 1 Liter Reservoir, 0 to 100 psi . . . . . . . . . . . . . . . . . . . . .8, 15, 22, 59, 68
Loctite® Micro Needle Valve Rod Replacement kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Toggle Valve for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Precision Filter and Regulator for use with 98084 . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Loctite® 22 Gauge, 1/2", Stainless Steel, Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Lens, 50 mm Distance, for use with 98083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Loctite® Lens, 9 mm Distance, for 98083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Loctite® Lens, 28 mm Distance, for 98083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Loctite® 30 Gauge, 1/2", Stainless Steel, Lavender, Helical Thread . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 30 Gauge, 1/2", Stainless Steel, Lavender, Helical Thread . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 32 Gauge, 1/4", Stainless Steel, Yellow, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 32 Gauge, 1/4", Stainless Steel, Yellow, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 30 ml Syringe Barrel, Black (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 3 ml Syringe Piston (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Foot Pedal for 98079 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® 10 ml Syringe Piston (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Cartridge Dispense Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Pressure Regulator for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Pressure Gauge for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Hysol™ Bulk-12 Hot Melt System, 115V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 52
Loctite® Hysol™ Bulk-12 Hot Melt System, 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 52
Loctite® Hysol™ Bulk-14 Hot Melt System, 115V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 53
Loctite® Hysol™ Bulk-14 Hot Melt System, 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 53
Loctite® Hysol™ Bulk-34 Hot Melt System, 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 54
Loctite® Hysol™ Hand Held Top Inlet Applicator, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ Hand Held Top Inlet Applicator, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ Hand Held Bottom Inlet Applicator, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ Hand Held Bottom Inlet Applicator, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ 2 Hand Applicator, 115 VAC / 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ 2 Hand Applicator, 230 VAC with 230 VAC Control Coil . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ 2 Hand Applicator, 230 VAC with 115 VAC Control Coil . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ 2 Hand Applicator, 115 VAC with 24 VDC Control Coil . . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ 2 Hand Applicator, 230 VAC with 24 VDC Control Coil . . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ Mounted Applicator, 230 VAC with 24 VDC Control Coil . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ Mounted Applicator, 115 VAC with 24 VDC Control Coil . . . . . . . . . . . . . . . . . .55
119
INDEX
ITEM
NUMBER PRODUCT NAME
98147
98148
98149
98157A
98158
98159
98160
98161
98162
98163
98164
98165
98166
98167
98168
98169
98170
98171
98172
98173
98174
98175
98176
98177
98178
98179
98180
98181
98182
98192
98193
98196
98197
98198
98199
98200
98201
98208
98209
98210
98211
98212
98213
98214
98215
98216
98217
98218
98219
98222
98223
98224
98225
98226
98227
98228
98229
98230
98231
98232
98233
98234
98235
98236
98237
98238
98239
98240
98241
98242
98243
98244
98245
98246
98247
98248
98249
98250
98251
98252
98253
98254
98255
98256
98257
98258
98259
98260
98261
120
PAGE NUMBER
Loctite® Hysol™ Mounted Applicator, 115 VAC with 115 VAC Control Coil . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ Mounted Applicator, 230 VAC with 230 VAC Control Coil . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ Mounted Applicator, 230 VAC with 115 VAC Control Coil . . . . . . . . . . . . . . . . .55
Loctite® ZETA® 7740 Light Cure Wand System . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 106, 114
Loctite® Hysol™ 2 Event Timer, 115/230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Hysol™ 4 Event Timer, 115/230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Foot Switch, Bulk Hot Melt System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Hysol™ Spray Controller, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Hysol™ Spray Controller, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® 14 Gauge, 1.5", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, 1.5", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 1.5", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 1.5", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 1.5", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 1.5", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 1.5", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 1.5", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 1.5", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 1.5", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 1.5", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 1.5", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 23 Gauge, 1.5", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 23 Gauge, 1.5", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 1.5", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 1.5", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 27 Gauge, 1.5", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 27 Gauge, 1.5", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 300 ml Cartridge – Tube Fitting Adapter, for 984832 / 984833 (3 pack) . . . . . . . . . . . .81
Loctite® ZETA® 7420 Visible Light Flood System, 230 VAC . . . . . . . . . . . . . . . . . . . .99, 109, 112
Loctite® Manual Plunger for 10 ml Syringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 25
Loctite® Manual Plunger for 30 ml Syringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 25
Loctite® 18 Gauge, 1/4", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 1/4", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 1/4", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 1/4", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 1/4", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 1/4", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, 1/2", Stainless Steel, Olive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 14 Gauge, 1/2", Stainless Steel, Olive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 21 Gauge, 1/2", Stainless Steel, Purple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 21 Gauge, 1/2", Stainless Steel, Purple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 23 Gauge, 1/2", Stainless Steel, Orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 23 Gauge, 1/2", Stainless Steel, Orange, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 27 Gauge, 1/2", Stainless Steel, Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 27 Gauge, 1/2", Stainless Steel, Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 14 Gauge, 1", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, 1", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 1", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 1", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 1", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 1", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 1", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 1", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 1", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 1", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 1", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 1", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 23 Gauge, 1", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 23 Gauge, 1", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 1", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 1", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 27 Gauge, 1", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 27 Gauge, 1", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, 45°, 1/2", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, 45°, 1/2", Stainless Steel White, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, 90°, 1/2", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, 90°, 1/2", Stainless Steel, White, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 45°, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 45°, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 90°, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 90°, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 45°, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 45°, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 90°, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 90°, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 45°, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 45°, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 90°, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 90°, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 45°, 1/2", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 45°, 1/2", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 90°, 1/2", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge, 90°, 1/2", Stainless Steel, Purple, Helical Thread . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 45°, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 45°, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 90°, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 90°, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 23 Gauge, 45°, 1/2", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . .80
Loctite® 23 Gauge, 45°, 1/2", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . .80
ITEM
NUMBER PRODUCT NAME
98262
98263
98264
98265
98266
98267
98268
98269
98270
98271
98272
98273
98277
98279A
98280A
98281A
98282A
98283A
98284A
98285A
98286A
98287A
98288A
98289A
98290A
98291A
98292A
98293A
98294A
98295A
98296A
98297A
98298A
98299A
98300A
98301A
98302A
98311
98314
98315
98316
98317A
98318
98319A
98320
98321
98322
98325
98326
98327
98328
98329
98330
98332
98333
98334
98335
98336
98337
98339
98340
98341
98342
98343
98344
98345
98346
98347
98348
98349
98350
98351
98357
98359
98360
98361
98362
98363
98364
98365
98367
98371
98373
98374
98375
98377
98378
98379
98380
PAGE NUMBER
Loctite® 23 Gauge, 90°, 1/2", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . .80
Loctite® 23 Gauge, 90°, 1/2", Stainless Steel, Orange, Helical Thread . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 45°, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 45°, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 90°, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 90°, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 27 Gauge, 45°, 1/2", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 27 Gauge, 45°, 1/2", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 27 Gauge, 90°, 1/2", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 27 Gauge, 90°, 1/2", Stainless Steel, Grey, Helical Thread . . . . . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, Tan, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 14 Gauge, Tan, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Benchtop Fume Filtration System with Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Loctite® 203 Benchtop Robot, 200 x 200 mm, 3 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 87
Loctite® 203 Benchtop Robot, 200 x 200 mm, 3 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 87
Loctite® 203 Benchtop Robot, 200 x 200 mm, 3 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 87
Loctite® 203 Benchtop Robot, 200 x 200 mm, 3 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 87
Loctite® 204 Benchtop Robot, 200 x 200 mm, 4 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 87
Loctite® 204 Benchtop Robot, 200 x 200 mm, 4 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 87
Loctite® 204 Benchtop Robot, 200 x 200 mm, 4 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 87
Loctite® 204 Benchtop Robot, 200 x 200 mm, 4 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 87
Loctite® 303 Benchtop Robot, 300 x 320 mm, 3 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 88
Loctite® 303 Benchtop Robot, 300 x 320 mm, 3 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 88
Loctite® 303 Benchtop Robot, 300 x 320 mm, 3 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 88
Loctite® 303 Benchtop Robot, 300 x 320 mm, 3 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 88
Loctite® 304 Benchtop Robot, 300 x 320 mm, 4 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 88
Loctite® 304 Benchtop Robot, 300 x 320 mm, 4 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 88
Loctite® 304 Benchtop Robot, 300 x 320 mm, 4 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 88
Loctite® 304 Benchtop Robot, 300 x 320 mm, 4 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 88
Loctite® 403 Benchtop Robot, 400 x 400 mm, 3 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 89
Loctite® 403 Benchtop Robot, 400 x 400 mm, 3 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 89
Loctite® 403 Benchtop Robot, 400 x 400 mm, 3 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 89
Loctite® 403 Benchtop Robot, 400 x 400 mm, 3 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 89
Loctite® 404 Benchtop Robot, 400 x 400 mm, 4 axis, 110V . . . . . . . . . . . . . . . . . . . . . . . .86, 89
Loctite® 404 Benchtop Robot, 400 x 400 mm, 4 axis, 110V, CE Rated . . . . . . . . . . . . . . . . .86, 89
Loctite® 404 Benchtop Robot, 400 x 400 mm, 4 axis, 220V . . . . . . . . . . . . . . . . . . . . . . . .86, 89
Loctite® 404 Benchtop Robot, 400 x 400 mm, 4 axis, 220V, CE Rated . . . . . . . . . . . . . . . . .86, 89
Loctite® 1 Liter Collapsible Bottle Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 24
Loctite® 55 ml Clear Syringe Barrel Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Loctite® 55 ml Black Syringe Barrel Kit for UV Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Loctite® 30 ml Mounting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® ZETA® 7735 UV Wand System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 105, 114
Loctite® 300 ml Cartridge Mounting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 300 ml Pneumatic Cartridge Dispensing Retainer . . . . . . . . . . . . . . . . . . . . . . . . .23, 29
Loctite® 10 ml Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 5 ml Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 3 ml Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 360° Rotation Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Mounting Bracket Kit for 98009 and 98013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Mounting Bracket Kit for 97113 and 97114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Mounting Rail, 3 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Mounting Rail, 8 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Mounting Rail, 12" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Tip Locator Bracket for 30 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Tip Locator Bracket for 300 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Tip Locator Bracket for 98009 Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Tip Locator for 97113 Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 4 Axis Robot Mounting Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® SCARA Robot Mounting Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Replacement 50W Lamp/Reflector Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 105
Loctite® 30 ml Syringe Holder for SCARA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 300 ml Syringe Holder for SCARA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Valve Holder for SCARA 98009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Valve Holder for SCARA 97113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Ribbon Tip Adapter – 10 mm mix nozzles (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Soft Squeeze Bottle, 2 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 24
Loctite® Soft Squeeze Bottle, 4 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 24
Loctite® Soft Squeeze Bottle, 8 oz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 24
Loctite® Dunce Cap, 2 oz. Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Loctite® Dunce Cap, 4 to 8 oz. Bottles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Loctite® Luer-Slip Cap, 2 oz. Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Loctite® Luer-Slip Cap, 4 to 8 oz. Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Loctite® Robot Z-Height Adjustment Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 2.25 Gallon Pressure Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 21
Loctite® Pressure Relief Valve Kit for 98359 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Pressure Regulator for 98359 Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Pressure Gauge for 98359 Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Lid Gasket for 98359 Reservoir – Buna N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Stepped Tip-Luer, 50 ml, 20 elements (2,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 50 ml Square Mix Nozzle, 16 elements (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Mix Nozzle, Snap Tip, 9.3 mm (1,000 pack) . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Cartridge Needle Luer-Lok® Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 200 / 400 ml Sq Mix Nozzle, Luer/Stepped Combo, 5.0 mm (10 pack) . . . . . . . . . . . .82
Loctite® 200 / 400 ml Sq Mix Nozzle, Luer/Stepped Combo, 5.0 mm (1,000 pack) . . . . . . . . . .82
Loctite® Lid Gasket for 98359 Reservoir – EP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Posi-Link™ Controller . . . . . . . . . . . . . . . . . . . . . . . . . .9, 10, 30, 31, 87, 88, 89, 90, 91
Loctite® Posi-Link™ 5-25 Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 10
Loctite® Posi-Link™ 10-50 Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 10, 30, 31
Loctite® Posi-Link™ 200-400 Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30, 31
For additional information and the full line of equipment, visit www.equipment.loctite.com.
98385
98386
98387
98388
98389
98390
98391
98392
98393
98394
98395
98396
98397
98398
98399
98400
98401
98402
98403
98404
98405
98406
98407
98408
98409
98410
98411
98412
98413
98414
98415
98416
98420
98424
98425
98426
98427
98428
98430
98439
98440
98441
98443
98444
98445
98446
98447
98448
98449
98450
98451
98452
98453
98454
98455
98456
98457
98458
98459
98460
98461
98462
98463
98464
98466
98467
98469
98470
98472
98473
98474
98476
98477
98478
98479
98480
98481
98482
98483
98484
98485
98486
98487
98488
98489
98490
98491
98492
98493
98494
PAGE NUMBER
Loctite® 14 Gauge, White, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 14 Gauge, White, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 16 Gauge, Grey, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 16 Gauge, Grey, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 18 Gauge, Green, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 18 Gauge, Green, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 20 Gauge, Pink, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 20 Gauge, Pink, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 22 Gauge, Blue, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 22 Gauge, Blue, Helical Thread, Taper Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Benchtop Interface Cable for Benchtop Robots . . . . . . . . . . . . . . . . . . .87, 88, 89, 90, 91
Loctite® 15 Gauge, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 15 Gauge, 1/2", Stainless Steel, Amber, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 18 Gauge, 1/2", Stainless Steel, Green, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 20 Gauge, 1/2", Stainless Steel, Pink, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 22 Gauge, 1/2", Stainless Steel, Blue, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 25 Gauge, 1/2", Stainless Steel, Red, Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® Poppet Valve Mounting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Tip Locator Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Poppet Valve Holder for SCARA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 10 mm (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 12 mm Ribbon Tip (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 25 mm Ribbon Tip (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 43 mm Ribbon Tip (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® ZETA® 7411-S UV Flood System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 109, 110
Loctite® 50 ml Hand Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 24
Loctite® Caulking Gun Converter Kit, 50 ml, 10:1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 26
Loctite® 55 ml Syringe Starter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 83
Loctite® Optional Shutter for 98413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Loctite® 21 Gauge 1/2" Stainless Steel, Purple Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® 21 Gauge 1/2" Stainless Steel, Purple Helical Thread . . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® Advancing Slide Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92, 93
Loctite® Single Rotary Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92, 94
Loctite® Dual Rotary Dispense Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92, 94
Loctite® 200 / 400 ml Mix Nozzle, 40 elements, Threaded Bell End (500 pack) . . . . . . . . . . . . .82
Loctite® Showcase Needle Variety Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® LED 7700 On/Off Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Loctite® Micro Needle Valve Mounting Bracket Kit for 98084 and 98520 . . . . . . . . . . . . . . . . .95
Loctite® Control Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Loctite® 50 ml Square Mix Nozzle, 16 elements (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Light Cure Acrylic Adhesive Dispensing system . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 14
Loctite® Roller Assembly, 1" wide band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Replacement Rollers, 1" wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Roller Assembly, 2" wide band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Replacement Rollers, 2" wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® ZETA® 7760 UV Wand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 107, 114
Loctite® Lamp / Reflector Module, 200 W for ZETA® 7760 . . . . . . . . . . . . . . . . . . . . . . .103, 107
Loctite® UV Safety Glasses, Orange . . . . . . . . . . . . . . . . . .99, 100, 101, 102, 104, 108, 110, 111
Loctite® Dosimeter Adapter for Intensity Measurement . . . . . . . . . . . . . . . . . . . . . .100, 101, 113
Loctite® 50 ml Mix Nozzle, Luer Tip, 6.0 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 50 ml Mix Nozzle, Stepped, 6.0 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 6 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 8 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Luer-Lok® Adapter for 6.0 mm and 8 mm Mix Nozzles . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 10 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 8 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 10 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 50 ml Mix Nozzle, Stepped, 6.0 mm (4,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 50 ml Mix Nozzle, Stepped, 5.4 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 8 mm (1,500 pack) . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Caulking Gun Converter Kit for 50 ml Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . .23, 26
Loctite® 200 / 400 ml Snap Tip Mix Nozzle (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Snap Tip Mix Nozzle (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Snap Tip Mix Nozzle and Ribbon Tip Sample Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 50 ml Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 25
Loctite® 50 ml Square Mix Nozzle, 5.3 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Square Mix Nozzle, 7.5 mm (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 12 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 25 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 43 mm Ribbon Tip (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 3 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 3 ml Syringe Barrel and Piston, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 3 ml Syringe Barrel and Piston, Black (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 3 ml Syringe Barrel and Piston, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 5 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 5 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 5 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 5 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 10 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 10 ml Syringe Barrel and Piston, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 10 ml Syringe Barrel and Piston, Black (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 10 ml Syringe Barrel and Piston, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 30 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 30 ml Syringe Barrel and Piston, Natural (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 30 ml Syringe Barrel and Piston, Black (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 30 ml Syringe Barrel and Piston, Black (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .85
ITEM
NUMBER PRODUCT NAME
98495
98496
98497
98498
98499
98500
98501
98520
98521
98522
98543
98544
98545
98548
98549
98557
98559
98561
98563
98565
98576
98578
98581
98584
98587
98588
98591
98593
98594
98595
98596
98597
98598
98601
98602
98603
98604
98605
98606
98607
98608
98609
98610
98611
98612
98613
98622
98623
98624
98625
98626
98627
98628
98629
98632
98633
98634
98635
98636
98637
98639
98640
98641
98642
98643
98644
98645
98646
98647
98648
98649
98652
98653
98655
98656
98657
98658
98659
98660
98661
98662
98663
98664
98667
98668
98669
98671
98672
98687
200022
For additional information and the full line of equipment, visit www.equipment.loctite.com.
INDEX
ITEM
NUMBER PRODUCT NAME
PAGE NUMBER
Loctite® 55 ml Syringe Barrel and Piston, Natural (250 pack) . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 55 ml Syringe Barrel and Piston, Natural (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 55 ml Syringe Barrel and Piston, Black (50 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 55 ml Syringe Barrel and Piston, Black (250 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Dispense Needle Tip Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Foldable 300 ml Cartridge Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 29
Loctite® Applicator Holder . . . . . . . . . . . . . . . . . . . . . . . . . . .6, 10, 11, 12, 59, 60, 61, 62, 83, 84
Loctite® Spray Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 69, 74
Loctite® Spray Valve Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 17, 69, 87, 88, 89, 90, 91
Loctite® LED Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Loctite® Light Guide, 5 mm x 1500 mm, Enhanced UVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Loctite® Hysol™ 050 Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44
Loctite® Hysol™ 050-HT Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44
Loctite® Benchtop Peristaltic Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6, 87, 88, 89, 90, 91
Loctite® Robot Interface Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 88, 89, 90, 91
Loctite® 3 ml Syringe Barrel, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 5 ml Syringe Barrel, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 10 ml Syringe Barrel, Natural (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 30 ml Syringe Barrel, Natural (500 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 55 ml Syringe Barrel, Natural (250 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 5 ml Syringe Barrel, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 10 ml Syringe Barrel, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 55 ml Syringe Barrel, Black (250 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 5 ml Syringe Piston (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 30 / 55 ml Syringe Piston (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® ZETA® 7610 UV Benchtop Conveyer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 116
Loctite® 7700 Hand Held LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 100, 101
Loctite® Light Guide, 3 mm x 1000 mm, 3 POLE, Enhanced UVC . . . . . . . . . . . . . . . . . . . . . . .107
Loctite® Light Guide, 3 mm x 1000 mm, 4 POLE, Enhanced UVC . . . . . . . . . . . . . . . . . . . . . . .107
Loctite® 7703 LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 100, 101
Loctite® Light Guide, 3 mm x 1000 mm, 3 POLE, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Loctite® Light Guide, 3 mm x 1000 mm, 4 POLE, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Loctite® IR Filter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 107
Loctite® 7700-HD LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 101
Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 3 axis, 110V . . . . . . . . . . . . . . . . . . . . .86, 90
Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 3 axis, 110V CE Rated . . . . . . . . . . . . .86, 90
Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 3 axis, 220V . . . . . . . . . . . . . . . . . . . . .86, 90
Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 3 axis, 220V CE Rated . . . . . . . . . . . . .86, 90
Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 4 axis, 110V . . . . . . . . . . . . . . . . . . . . .86, 90
Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 4 axis, 110V CE Rated . . . . . . . . . . . . .86, 90
Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 4 axis, 220V . . . . . . . . . . . . . . . . . . . . .86, 90
Loctite® 500 Benchtop Robot, 510 mm x 510 mm, 4 axis, 220V CE Rated . . . . . . . . . . . . .86, 90
Loctite® 3/4" wide x 1/4" NPT Dispense Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Needle, 23 gauge, Helix, 1/2" Stainless Steel (50 pack) . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® Needle, 23 gauge, Helix, 1/2" Stainless Steel (1,000 pack) . . . . . . . . . . . . . . . . . . . . .80
Loctite® Precision O-Ring Cut and Splice Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® 50 ml Mix Nozzle, 20 elements, Luer (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 50 ml Mix Nozzle, 20 elements, Step (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Needle, 25 gauge, 1/4" Stainless Steel, Red (50 pack) . . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® Needle, 25 gauge, 1/4" Stainless Steel, Red (1,000 pack) . . . . . . . . . . . . . . . . . . . . . .80
Loctite® Needle, 27 gauge, 1/4" Stainless Steel, Clear (50 pack) . . . . . . . . . . . . . . . . . . . . . . .80
Loctite® Needle, 27 gauge, 1/4" Stainless Steel, Clear (1,000 pack) . . . . . . . . . . . . . . . . . . . . .80
Loctite® Needle, 30 gauge, 1/4" Stainless Steel, Lavender (50 pack) . . . . . . . . . . . . . . . . . . . .80
Loctite® Needle, 30 gauge, 1/4" Stainless Steel, Lavender (1,000 pack) . . . . . . . . . . . . . . . . . .80
Loctite® 50 ml Square Mix Nozzle, 24 elements, 5.3 mm2 (1,000 pack) . . . . . . . . . . . . . . . . . .82
Loctite® ZETA® 7720 Visible Light Wand System . . . . . . . . . . . . . . . . . . . . . . .98, 103, 104, 114
Loctite® 6 mm D x 1000 mm Fiber Optic Light Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Loctite® Replacement Lamp Reflector Module, 100 W for Loctite® Indigo™ 7720 . . . . .103, 104
Loctite® SCARA Interface Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Loctite® Formable Dispense Tip, 21 Gauge, White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Posi-Link™ 10-50 Syringe Nest, 10 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Loctite® Posi-Link™ 10-50 Syringe Nest, 25 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Loctite® Posi-Link™ 10-50 50ml Dual Cartridge Nest, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . . . . .31
Loctite® Posi-Link™ 10-50 50ml Dual Cartridge Nest, 10:1 . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Loctite® Posi-Link™ 5-25 Syringe Nest, 5 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Loctite® Posi-Link™ 5-25 Syringe Nest, 10 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Loctite® Posi-Link 5-25 Syringe Nest, 25 ml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Loctite® Universal Syringe Bracket for Loctite® Posi-Link™ . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 50 ml Dual Cartridge Bracket for Loctite® Posi-Link™ . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® PC Interface Cable for Loctite® Benchtop Robots . . . . . . . . . . . . . . . .87, 88, 89, 90, 91
Replacement Bulb, 6" UV for Loctite® ZETA® 7610 Conveyor . . . . . . . . . . . . . . . . . . . . . . . .116
Loctite® Light Blocking Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 200 / 400 ml Square Mix Nozzle, 7.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 3 ml Syringe Barrel, Black (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 3 ml Syringe Air Line Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 83
Loctite® 5 ml Syringe Air Line Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 83
Loctite® Dispense Tip, 25 gauge, Taper Tip, Helix Thread (50 pack) . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Dispense Tip, 25 gauge, Taper Tip, Helix Thread (1,000 pack) . . . . . . . . . . . . . . . . . . .81
Loctite® Dispense Tip, 27 gauge, Taper Tip, Helix Thread (50 pack) . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Dispense Tip, 27 gauge, Taper Tip, Helix Thread (1,000 pack) . . . . . . . . . . . . . . . . . . .81
Loctite® Posi-Link™ 200-400 200 ml Dual Cartridge Nest, 1:1 and 2:1 . . . . . . . . . . . . . . . . . .31
Loctite® Posi-Link™ 200-400 400 ml Dual Cartridge Nest, 1:1 and 2:1 . . . . . . . . . . . . . . . . . .31
Loctite® Posi-Link™ 200-400 400 ml Dual Cartridge Nest, 10:1 . . . . . . . . . . . . . . . . . . . . . . .31
Loctite® 200 / 400 ml Square Mix Nozzle, 24 elements, Threaded Bell End . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Square Mix Nozzle, 24 elements, Threaded Bell End . . . . . . . . . . . . . . .82
Loctite® LED Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® Solenoid for 97141 – Loctite® Pinch Tube Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Loctite® 200 / 400 ml Mix Nozzle, 40 elements, Threaded Bell End (10 pack) . . . . . . . . . . . . . .82
Loctite® Adapter Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Empty 1 lb. HDPE Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 20, 22
121
INDEX
ITEM
NUMBER PRODUCT NAME
419115
583804
805741
830703
830740
869401
869402
870096
870097
870098
883976
883979
891494
902521
909393
909394
909395
909396
910276
916050
916268
916281
916282
918088
929541
936680
936701
936702
937394
941765
951639
951681
958216
958228
958239
960356
967055
970655
971023
971024
971028
971031
976418
976419
976420
980160
980161
981821
981866
981880
981994
982440
982450
982520
982621
982644
982716
982719
982720
982721
982722
982723
982724
982726
982727
982732
982880
982881
983050
983055
983095
983116
983117
983255
983330
983436
983437
983438
983439
983462
983464
983465
983466
122
PAGE NUMBER
Loctite® Standard Adapter/Check Valve for Nozzles (Single pack) . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® 50 ml Mix Nozzle, Stepped, 5.4 mm (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® UVALOC 1000 UV Cure Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 108
Loctite® 14 Gauge, 1/4", Stainless Steel, Olive, Helical Thread (50 pack) . . . . . . . . . . . . . . . . .80
Loctite® 14 Gauge, 1/4", Stainless Steel, Olive, Helical Thread (1,000 pack) . . . . . . . . . . . . . . .80
Loctite® Feed Line Tubing, Clear, 2.0 mm OD x 1.4 mm ID, 20 Meters . . . . . . . . . . . . . . . . . . .85
Loctite® Feed Line Tubing, Clear, 1.6 mm OD x 1.0 mm ID, 20 Meters . . . . . . . . . . . . . . . . . . .85
Loctite® UV Bulb, Gallium, UVALOC 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Loctite® UV Bulb, Iron, UVALOC 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Loctite® UV Bulb, Mercury, UVALOC 1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Loctite® Digital Syringe Dispensing System . . . . . . . . . . . . . . . . . . . .5, 12, 84, 87, 88, 89, 90, 91
Loctite® 7703-HD LED Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 101
Loctite® Light Intensity Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 105, 106, 107
Loctite® Replacement Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® O-Ring Replacement Cord Stock, 0.250" diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® O-Ring Replacement Cord Stock, 0.125" diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® O-Ring Replacement Cord Stock, 0.093" diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® O-Ring Replacement Cord Stock, 0.187" diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® Black Tubing 1.6 mm OD x 1.0 mm ID x 20 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Hysol™ 050A, 0.090 Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Hysol™ 050 Gas Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44
Loctite® Hysol™ 050-Lite Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 45
Loctite® Hysol™ 050A Hot Melt Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 44
Loctite® 200 / 400 ml Mix Nozzle, 32 Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Z Plate Robot Adapter; Posi-Link™ 200 / 400 Dual Cartridge . . . . . . . . . . . . . . . . . . .95
Feed line tubing 2.0 mm OD x 1.4 mm ID, black, 1 x 65.6' . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Clear Tubing, 3.0 mm OD x 1.9 mm ID x 20 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Clear Tubing, 3.0 mm OD x 2.4 mm ID x 20 m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Feed Line Tubing, 3.0 mm OD x 2.4 ID, Black, 20 Meters . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Feed Line Tubing, 2.5 mm OD x 1.9 ID, Black, 20 Meters . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Dual Light Guide Balancing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Loctite® Single Light Guide, 1.5 m Long x 5 mm Diameter . . . . . . . . . . . . . . . . . . .105, 106, 107
Loctite® ZETA® 7735 UV Wand – IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 105
Loctite® ZETA® 7740 UV Wand – IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 106
Loctite® ZETA® 7760 UV Wand – IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 103, 107
Loctite® LED Cure Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100, 101
Loctite® LED Tip Covers (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100, 101
Loctite® Static Mixer-Luer Adapter (2,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Replacement Ballast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Loctite® Replacement Filter Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109, 111
Loctite® 7418 Replacement Bulb – MH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109, 111
Loctite® Indigo™ 7418 Flood Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 109, 111
Loctite® CureJet™ Indigo™ LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 102
Loctite® LED Controller for 976418 – CureJet™ Indigo™ LED . . . . . . . . . . . . . . . . . . . . .98, 102
Loctite® CureJet™ 405 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 102
Loctite® High Intensity UV Source, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 118
Replacement 5" UV Bulb – 300 W/in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Loctite® 1/4", Clear, Polyethylene Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 3/8", Clear, Polyethylene Feed Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Replacement Reservoir Lid O-Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® 1/4", Clear, Nylon Feed Tube for Pump-A-Bead™ . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® High Intensity UV Source, 220 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99, 118
Loctite® 200 g Gel Tube Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Universal Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84, 85
Loctite® Stainless Steel Poppet Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 70, 74, 77
Loctite® Fishbach Cartridge Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® AC Level Sensor Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 85
Loctite® Bond-A-Matic® 3000 Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 7, 62
Loctite® Bond-A-Matic® 3000 Reservoir,
0 to 15 psi with Low Level Sensor . . . . . . . . . . .15, 16, 17, 20, 59, 61, 65, 66, 67, 68, 69, 71, 79
Loctite® Bond-A-Matic® 3000 Reservoir,
0 to 15 psi with Low Level Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 20, 59, 61, 66, 68
Loctite® Bond-A-Matic® 3000 Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 7, 62
Loctite® Bond-A-Matic® 3000 Reservoir, 0 to 100 psi
with Low Level Sensor . . . . . . . . . . . . . . . . . . . .15, 16, 17, 20, 59, 61, 65, 66, 67, 68, 69, 71, 79
Loctite® Bond-A-Matic® 3000 Reservoir,
0 to 100 psi with Low Level Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 20, 59, 61, 66, 68
Loctite® Bond-A-Matic® 3000 Reservoir,
0 to 15 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 17, 20, 59, 60, 61, 65, 66, 67, 68, 69, 71, 79
Loctite® Bond-A-Matic® 3000 Reservoir,
0 to 100 psi . . . . . . . . . . . . . . . . . . . . . . . . .15, 17, 20, 59, 60, 61, 65, 66, 67, 68, 69, 71, 72, 79
Loctite® Replacement 24 VDC Sensor for 982720 and 982723 Only . . . . . . . . . . . . . . . . . .22, 85
Loctite® 4 Liter Gravity Feed Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 22, 72
Loctite® Replacement Reservoir Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Visible Lamp for 98027, 98413 or 98039 – 400 W/in. . . . . . . . . . . . . . . . . . . . .109, 110
Loctite® Reservoir Lid O-Ring for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Tube Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Replacement Actuator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Replacement Pump Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Replacement Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Positive Displacement Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 64, 72, 74
Loctite® 200 ml Dual Cartridge Manual Applicator, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . . . . .23, 27
Loctite® 200 ml Dual Cartridge Pneumatic Applicator, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . .23, 27
Loctite® 400 ml Dual Cartridge Manual Applicator, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . . . . .23, 27
Loctite® 400 ml Dual Cartridge Pneumatic Applicator, 1:1 and 2:1 . . . . . . . . . . . . . . . . . . .23, 27
Loctite® Exhaust Plenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Loctite® Sight Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Loctite® Sight Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Loctite® Air Deflection Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
ITEM
NUMBER PRODUCT NAME
983469
983470
983471
983509
983533
983534
983677
983684
983914
984070
984209
984210
984211
984261
984262
984263
984264
984265
984266
984267
984268
984272
984280
984281
984347
984363
984480
984594
984621
984625
984650
984684
984685
984687
984688
984691
984818
984826
984832
984833
984999
985001
985002
985003
985004
985005
985022
985087
985110
985111
985112
985113
985114
985115
985116
985122
985211
985216
985225
985243
985245
985246
985249
985281
985298
985397
985676
985934
985940
985942
986000
986025
986035
986060
986086
986091
986264
986300
986301
986325
986326
986331
986337
986338
986339
986340
986341
986342
986343
PAGE NUMBER
Fusion D Bulb – 300 W/in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115, 117
Fusion H Bulb – 300 W/in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115, 117
Fusion V Bulb – 300 W/in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115, 117
Loctite® 50 ml Mix Nozzle, 20 elements, Luer (2,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 50 ml Replacement Applicator Plunger, 1:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Loctite® 50 ml Replacement Applicator Plunger, 2:1 ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Loctite® Single Light Guide, 1 m Long x 5 mm Diameter . . . . . . . . . . . . . . . . . . . . .105, 106, 107
Loctite® Dual Light Guide, 1 m Long x 3 mm Diameter . . . . . . . . . . . . . . . . . . . . . .105, 106, 107
Loctite® Poppet Valve (0 to 625 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 70, 74, 77
Loctite® Cotton Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Loctite® Optional 50 ml Applicator Plunger, 4:1 Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Loctite® 4:1 Conversion Kit for 983439 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Loctite® 4:1 Conversion Kit for 983438 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Loctite® Standard Adapter for 300 ml Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Standard 1-Hole Nozzle with Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Adapter/Check Valve for Specialty Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Needle Jet Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Diagonal Extension Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Flat Spreader Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® 2-Hole Spreader Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® 3-Hole Spreader Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Injection Needle Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Pneumatic Foot Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Vertical Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Applicator Hanger Arm for Bulk-14 and Bulk-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Applicator Hanger Arm for Bulk-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Reservoir Liner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 20
Loctite® High Viscosity Dispense Valve – Machine Mount (0 to 4,000 psi) . . . . . . . . . . . . . . . . .77
Loctite® Replacement Foot Switch for 98521 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 69
Loctite® Vertical Syringe Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12, 83
Loctite® Syringe Air Line Filter for Syringe Dispensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Loctite® Valve Rebuild Kit for 98009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Valve Rebuild Kit for 98013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Anti-Bubbler Kit for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Silicone Tubing for Dispense Valve Purging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Advancing Slide, 2" Stroke . . . . . . . . . . . . . . . . . . . . . . . . .15, 17, 65, 66, 67, 70, 71, 84
Loctite® Replacement 100W Lamp Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 106
Loctite® Replacement Sleeve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Fitting, 1/4" NPT x 1/4" Tube, Black, Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 84
Loctite® Fitting, 1/4" NPT x 3/8" Tube, Black, Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 84
Loctite® Standard 1-Hole Nozzle, 10" Diameter x 16" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Spreader Nozzle (0.08" x 25" sq.) x 47" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Pencil Point Nozzle, 0.08" Diameter x 24" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Precision Nozzle, 0.05" Diameter x 20" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Extension Nozzle, 0.10" Diameter x 50" L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Silicone Rubber Safety Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Optional Head Extension Cable for 98413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Loctite® Heavy Duty Metal Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® 2-Hole Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® 3-Hole Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Diagonal Extension Nozzle, 0.10" Diameter x 1.32" Long . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Needle Extension Nozzle, 0.05 Diameter x 1.32 Long . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Spreader Extension Nozzle, (0.09 x 25" sq.) x 1.22 Long . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® L-Nozzle (Ideal for Overlap Carton Sealing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® T-Nozzle (Ideal for Center Flap Carton Sealing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Standard Medium Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Narrow Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Ultra Wide Spray Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Replacement Standard Nozzle, 0.08" Diameter Cone Tip . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Tool Hanger/Balancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Universal Metal Dispenser for 200 / 400 ml Cartridges . . . . . . . . . . . . . . . . . . . . .23, 28
Loctite® 400 ml Dual Cartridge Manual Dispenser, 10:1 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 27
Loctite® 400 ml Dual Cartridge Pneumatic Applicator, 10:1 . . . . . . . . . . . . . . . . . . . . . . . . .23, 27
Loctite® Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66, 84
Loctite® Replacement Silicone Work Surface for 98039 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Loctite® Air Line Filter/Regulator with Pressure Gauge (0 to 150 psi) . . . . . . . . . . . . . . .46, 49, 77
Loctite® 1.5 mm ID Tapered Aluminum Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Replacement Ballast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Visible Arc Bulb, 1500 W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109, 112
Loctite® Replacement Filter Glass, Tempered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109, 112
Loctite® Pump-A-Bead™ II Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 13, 70
Loctite® Nozzle, 0.025" Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Nozzle, 0.035" Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Nozzle, 0.060" Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Optional 50 ml Applicator Plunger, 10:1 Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Loctite® 4 Conductor Cable with M-12 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Loctite® 4-Way Solenoid for 98079 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Poppet Valve – 1/4" Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64, 70, 74, 77, 85
Loctite® Valve Rebuild Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Air Operated Mounted Applicator, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® 4-Way Solenoid Valve Kit, 24 VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® Valve Mount Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Extrusion Hose, 4', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 4', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 6', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 6', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 8', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 8', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 10', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
For additional information and the full line of equipment, visit www.equipment.loctite.com.
986344
986345
986346
986347
986348
986349
986350
986351
986352
986353
986354
986355
986356
986357
986358
986359
986360
986361
986362
986363
986364
986365
986366
986367
986368
986369
986370
986371
986372
986373
986374
986375
986376
986377
986378
986379
986380
986381
986382
986383
986384
986385
986386
986387
986388
986389
986390
986391
986392
986393
986394
986395
986396
986397
986398
986399
986400
986634
986635
986636
986637
986638
986639
986693
986694
986695
986696
986697
986698
986699
986700
986701
986702
986703
986704
986723
986724
986725
986727
986730
986733
986736
986738
986740
986742
986743
986744
986745
986746
PAGE NUMBER
Loctite® Extrusion Hose, 10', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 12', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 12', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 16', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 16', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 18', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 18', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 24', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Extrusion Hose, 24', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 4', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 4', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 6', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 6', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 8', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 8', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 10', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 10', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 12', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 12', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 16', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 16', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 18', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 18', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 24', 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Hose, 24', 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Bead Nozzle 1/2" x 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1" x 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 2" x 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 3" x 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1/2" x 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1" x 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 2" x 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 3" x 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1/2" x 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1" x 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 2" x 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 3" x 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1/2" x 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1" x 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 2" x 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 3" x 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1/2" x 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1" x 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 2" x 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 3" x 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1/2" x 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1" x 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 2" x 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 3" x 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1/2" x 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1" x 0. 080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 2" x 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 3" x 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1/2" x 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 1" x 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 2" x 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bead Nozzle 3" x 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bulk-14 Hopper Upgrade, 40 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Bulk-34 Hopper Upgrade, 78 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Floor Stand Kit For Bulk Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Hose Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Tension Balancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Cradle and Tension Balancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Feed Line Adapter, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Feed Line Adapter, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.012" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.015" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.025" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.070" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Button Nozzle, 0.090" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Proximity Sensor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Optical Sensor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Sensor Cord Extension, 10 Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle O-Ring (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle Screw (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Blank Screw Assembly (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle Assembly, 0.010" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle Assembly, 0.020" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle Assembly, 0.030" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle Assembly, 0.040" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Timer Cord, 24 VDC Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Timer Cord, Single Line Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Timer Cord, 2 Line Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Timer Cord – Bulk 34 Line Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
ITEM
NUMBER PRODUCT NAME
986747
986783
986784
986785
986786
986791
986792
986793
986797
986798
986799
986803
986804
986805
986806
986807
986808
986809
986810
986884
986885
986886
986887
986888
986889
986890
986891
986892
987017
987200
987201
987364
987365
987366
987367
987512
987525
987526
987835
988000
988107
988108
988159
988173
988506
988510
988514
988516
988517
988519
988520
988522
988523
988525
988526
988528
988530
988532
988533
988535
988536
988539
988541
988542
988543
988545
988547
988548
988551
988552
988554
988715
988716
988717
988718
988719
988720
988721
988722
988723
988724
988725
988726
988837
988840
988843
988844
988845
For additional information and the full line of equipment, visit www.equipment.loctite.com.
INDEX
ITEM
NUMBER PRODUCT NAME
PAGE NUMBER
Loctite® Timer Cord – Bulk 34, 24 VDC Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Direction Nozzle, 0.010" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle, 0.020" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle, 0.030" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Direction Nozzle, 0.040" Diameter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® T-Bar Nozzle, 2" x 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® T-Bar Nozzle, 2" x 2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® T-Bar Nozzle, 2" x 3" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Y-Bar Nozzle, 2" x 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Y-Bar Nozzle, 2" x 2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Y-Bar Nozzle, 2" x 3" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Swirl Nozzle, 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Swirl Nozzle, 0.045" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Swirl Nozzle, 0.060" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Swirl Nozzle, 0.080" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Spray Nozzle and O-Ring, 0.020" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Spray Nozzle and O-Ring, 0.030" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Spray Nozzle and O-Ring, 0.040" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Spray Nozzle and O-Ring, 0.050" Orifice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® 2 Hand Applicator Cord, 1 Switch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® 2 Hand Applicator Cord, 2 Switch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® Hysol™ 2 Hand Extrusion Controller, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Hysol™ 2 Hand Spray Controller, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Swirl Nozzle Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Spray Nozzle Assembly – Fan Air Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Loctite® Timer Cord, Single Line, 24 VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® External Interface Cable for Bulk-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® External Interface Cable for Bulk-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Spray Nozzle Assembly – Cone Air Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Pre-Filter for Benchtop Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Carbon Bed Filter for Benchtop Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
HEPA / Carbon Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Exhaust Arm Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Exhaust Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Exhaust Arm Nozzle – 40 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Loctite® Operation Box for SCARA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Loctite® Hysol™ 2 Hand Extrusion Controller, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Hysol™ 2 Hand Spray Controller, 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® External Interface Cable for Bulk-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® Solenoid Valve Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 88, 89, 90, 91
Loctite® Nozzle Adapter/Check Valve for Loctite® Hysol™ 050 Hot Melt Applicator . . . . . . . . .49
Loctite® 1-Hole Nozzle, 0.08" Diameter,
for Loctite® Hysol™ 050 Hot Melt Applicator (5 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Loctite® Replacement Filter Glass for 98413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Loctite® Replacement Light Blocking Curtain for 98413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Hand Pump Washers (3 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Loctite® Low Viscosity Fluid Pump System, 1:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® Low Viscosity Fluid Pump System, 3:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® Low Viscosity Fluid Pump System, 3:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® Low Viscosity Fluid Pump System, 3:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® Low Viscosity Fluid Pump System, 3:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® Low Viscosity Fluid Pump System, 14:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® Low Viscosity Fluid Pump System, 14:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® Low Viscosity Fluid Pump System, 14:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® Low Viscosity Fluid Pump System, 14:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . . .75
Loctite® 4 1/4" Air Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 6" Air Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® CS Pump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Inert Pump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® CS Pump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Inert Pump Tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® CS, 55 Gallon Twin Post Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® CS, 5 Gallon Single Post Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Inert, 55 Gallon Twin Post Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Inert, 5 Gallon Single Post Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Pump Hoist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Pump Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 55 Gallon Drum Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 5 Gallon Pail Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Low Level Cut-off – 55 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Microswitch (Low Level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Wall Mount Kit for Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® High Viscosity Paste Pump System, 22:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 22:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 22:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 22:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 44:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 44:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 44:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 44:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 64:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 64:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 64:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 64:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® CS Pump Tube with Inert Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® CS Pump Tube with Inert Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® High Viscosity Paste Pump System, 22:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 44:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 64:1 ratio, 5 gallon . . . . . . . . . . . . . . . . . . . . . . . .76
123
INDEX
ITEM
NUMBER PRODUCT NAME
988846
988847
988848
988896
988900
988901
988902
988903
988906
988907
988908
988909
988912
988913
988924
988925
988926
988927
988928
988931
988932
988933
988934
988935
988938
988939
988940
988941
988942
988945
988946
988947
988948
988949
988952
988953
988954
988955
988956
988973
988974
988975
988976
988977
988978
988979
988980
988981
988982
988983
988984
988985
988986
988988
988989
988991
988993
988994
988995
988996
988997
988998
988999
989000
989001
989002
989003
989004
989005
989006
989007
989008
989011
989012
989013
989015
989016
989017
989018
989019
989020
989021
989022
989023
989024
989025
989026
989027
989029
124
PAGE NUMBER
Loctite® High Viscosity Paste Pump System, 22:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 44:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® High Viscosity Paste Pump System, 64:1 ratio, 55 gallon . . . . . . . . . . . . . . . . . . . . . . .76
Loctite® Syringe Finger Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11, 12
Loctite® Meter Mix 1000L Dispense System – Fixed Ratio . . . . . . . . . . . . . . . . . . . . . . . . .32, 35
Loctite® Meter Mix 1000L Dispense System – Variable Ratio . . . . . . . . . . . . . . . . . . . . . . .32, 35
Loctite® Meter Mix 1000H Dispense System – Fixed Ratio . . . . . . . . . . . . . . . . . . . . . . . . .32, 35
Loctite® Meter Mix 1000H Dispense System – Variable Ratio . . . . . . . . . . . . . . . . . . . . . . .32, 35
Loctite® Meter Mix 2000 Dispense System – Fixed Ratio . . . . . . . . . . . . . . . . . . . . . . . . . .32, 36
Loctite® Meter Mix 2000 Dispense System – Variable Ratio . . . . . . . . . . . . . . . . . . . . . . . .32, 36
Loctite® Meter Mix 3000 Dispense System – Fixed Ratio . . . . . . . . . . . . . . . . . . . . . . . . . .32, 37
Loctite® Meter Mix 3000 Dispense System – Variable Ratio . . . . . . . . . . . . . . . . . . . . . . . .32, 37
Loctite® Abrasion Resistant Pumps Instead of Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 304 Stainless Steel Pumps Instead of Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 8 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 8 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 8 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 8 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 8 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 10 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 10 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 10 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 10 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 10 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 15 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 15 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 15 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 15 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 15 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 20 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 20 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 20 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 20 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 20 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 25 mm High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 25 mm High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 25 mm High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 25 mm High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 25 mm High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Custom Diameter High, 8 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Custom Diameter High, 10 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Custom Diameter High, 15 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Custom Diameter High, 20 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Custom Diameter High, 25 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Custom Diameter High, 30 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Custom Diameter High, 35 mm Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 8 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 10 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 15 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 20 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 25 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 30 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 35 mm High, Custom Diameter Low MMD Pump Pair . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 5 L Stainless Steel Tank with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® 7.5 L Stainless Steel Tank with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® 7.5 L Tank High-Low and Vac. Ready – Mild Steel (MMD 3000) . . . . . . . . . . . . . . . . . .39
Loctite® 7.5 L Tank High-Low and Vac. Ready – Stainless Steel (MMD 3000) . . . . . . . . . . . . . .39
Loctite® Recirculation for 5 or 7.5 L Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® 6.9 CFM Vacuum Pump Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Remote Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Pressure-Vacuum Tank – Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Electric Agitator – 1 (5 gallon) Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Tank Support Stand – Holds 2 Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Disposable Desiccant Dryer – 5 Gallon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Nitrogen Harness Assembly – 1 Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Nitrogen Harness Assembly – 2 Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Polyethylene Tank Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Polyethylene Follower Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Tank Air Pressure Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Low Level Control Sensor (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® High & Low Level Control Sensors (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Pressure-Vacuum Tank – Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Pump Inlet Adapter Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Disposable Desiccant Air Dryer and Lock Down Lid . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Follower Plate with Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Electric Agitator Assembly with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Aluminum Accumulator; High-Low Electric Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Stainless Steel Accumulator; High-Low Electric Controls . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Precision Flow Control Drive – (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Electrical Enclosure and Controls for 1 Heat Load . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Electrical Enclosure and Controls for 2 Heat Loads . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Electrical Enclosure and Controls for 3 Heat Loads . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Electrical Enclosure and Controls for 4 Heat Loads . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Heat Blanket (720W) and Insulation for 5 or 7.5 L Tank . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Hose Heater (50W) and Insulation for 1/2" or 3/8" x 2' long . . . . . . . . . . . . . . . . . . . .39
Loctite® Pistol Grip - Pneumatic Switch Option – (MMD 1000) . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Dispense Valve – 1:1 Nose, Abrasion Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Dispense Valve – 1:1 Nose, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® 3 Way Stainless Steel Ratio Check Valve Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
ITEM
NUMBER PRODUCT NAME
989030
989031
989033
989035
989037
989038
989039
989040
989041
989042
989070
989071
989076
989098
989099
989103
989104
989105
989106
989107
989108
989109
989110
989111
989112
989113
989114
989115
989116
989117
989118
989119
989120
989121
989122
989123
989124
989125
989126
989127
989128
989129
989130
989131
989132
989133
989134
989135
989136
989137
989138
989139
989140
989141
989147
989148
989161
989162
989164
989165
989166
989167
989168
989169
989170
989171
989172
989173
989174
989175
989176
989177
989178
989179
989180
989181
989182
989183
989184
989185
989186
989187
989188
989189
989190
989191
989192
989193
989195
PAGE NUMBER
Loctite® Low Level Sensor for one 7.5 L Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Vacuum Valving Assembly – 1.0" Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Vacuum Valving Assembly – 1.0" Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Shipping Crate - 5 and 7.5 L Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 7.5 L Tank, High-Low Sensor Ready (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® LCA Tubing Applicator, 2 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Loctite® LCA Tubing Applicator, 3 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Loctite® LCA Tubing Applicator, 4 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Loctite® LCA Tubing Applicator, 5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Loctite® LCA Tubing Applicator, 6 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Loctite® 3/4" MNPT x 1/2" MNPT Hex Nipple, Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Fitting – 985397 to Primer 3 Way Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Secondary Regulator (0 to 725 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Dispense Valve – 10:1 Nose, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Dispense Valve – 10:1 Nose, Abrasion Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® High Pressure 3/4" x 6' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . . .77
Loctite® High Pressure 3/4" x 12' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . .77
Loctite® High Pressure 3/4" x 24' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . .77
Loctite® High Pressure 1" x 6' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . . . . .77
Loctite® High Pressure 1" x 12' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . . . .77
Loctite® High Pressure 1" x 24' Stainless Steel, PTFE Lined – 5,000 psi max . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 3/8" x 6' – 2,250 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose for Dispense Valve 3/8" x 12' – 2,250 psi . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 3/8" x 24' – 2,250 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 1/2" x 6' – 2,000 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose for Dispense Valve 1/2" x 12' – 2,000 psi . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 1/2" x 24' – 2,000 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 3/4" x 6' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 3/4" x 12' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 3/4" x 24' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 1" x 6' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 1" x 12' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Medium Pressure Hose 1" x 24' – 1,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1" JIC M x 3/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/4" JIC M x 3/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/4" JIC M x 1/2" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/2" JIC M x 3/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/2" JIC M x 1/2" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/2" JIC M x 1/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/8" JIC M x 1/2" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/8" JIC M x 3/8" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/8" JIC M x 1/4" MNPT Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/8" JIC M x 3/8" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/2" JIC M x 1/4" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/2" JIC M x 1/2" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/4" JIC M x 3/4" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/4" JIC M x 1/2" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1" JIC M x 3/4" MNPT Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/4" FNPT x 1/4" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/4" FNPT x 1/2" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/2" FNPT x 1/8" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/2" FNPT x 1/4" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/8" FNPT x 1/8" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3/8" FNPT x 1/4" MNPT Reducing Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® High Viscosity Hand Gun – Pistol Grip (0 to 4,000 psi) . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® High Viscosity Hand Gun – In-Line (0 to 3,400 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Primary Fluid Regulator Assembly (250 to 4,500 psi) . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Air Operated Fluid Regulator (250 to 4,500 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Optional – Gauge and Isolator Assembly (0 to 5,000 psi) . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Secondary Fluid Regulator Assembly (0 to 725 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Optional – Gauge & Isolator Assembly (0 to 1,000 psi) . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Particle Filter Assembly (0 to 5,000 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Particle Filter – Purge Tube Upgrade Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® FLR (Filter, Lubricator, Regulator) Assembly, 1/2 inch ports (0 to 100 psi) . . . . . . . . . . .77
Loctite® 1/4" MNPT, 1" Long x 0.150" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/4" MNPT, 1" Long x 0.094" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/4" MNPT, 1" Long x 0.063" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/4" MNPT, 2.5" Long x 0.150" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/4" MNPT, 2.5" Long x 0.094" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/4" MNPT, 2.5" Long x 0.063" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/8" MNPT, 1" Long x 0.150" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/8" MNPT, 1" Long x 0.094" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/8" MNPT, 1" Long x 0.063" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/8" MNPT, 2.5" Long x 0.150" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/8" MNPT, 2.5" Long x 0.094" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1/8" MNPT, 2.5" Long x 0.063" ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1.5 mm ID Tapered Stainless Steel Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . .77
Loctite® 2 mm ID Tapered Stainless Steel Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3 mm ID Tapered Stainless Steel Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 4 mm ID Tapered Stainless Steel Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 1.5 mm ID Tapered Acetal Copolymer Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . .77
Loctite® 2 mm ID Tapered Acetal Copolymer Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . .77
Loctite® 3 mm ID Tapered Acetal Copolymer Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . .77
Loctite® 4 mm ID Tapered Acetal Copolymer Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . .77
Loctite® 2 mm ID Tapered Aluminum Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 3 mm ID Tapered Aluminum Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® 4 mm ID Tapered Aluminum Nozzle, Straight Thread . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Adapter for Straight Thread Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® MMD Hose – 3/16" X 24", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
For additional information and the full line of equipment, visit www.equipment.loctite.com.
989198
989201
989202
989203
989204
989205
989206
989207
989208
989209
989210
989211
989212
989213
989214
989215
989216
989217
989218
989219
989230
989231
989232
989233
989234
989235
989244
989245
989268
989269
989270
989271
989272
989273
989274
989276
989277
989347
989352
989353
989354
989355
989356
989357
989358
989359
989388
989400
989401
989402
989403
989404
989415
989416
989433
989434
989516
989518
989620
989656
989657
989661
989748
989751
989752
989753
989754
989755
989763
989771
989777
989783
989784
989785
989787
989788
989789
989852
989860
989929
989937
992641
993163
993174
993247
997312
997569
998353
998390
PAGE NUMBER
Loctite® MMD Hose – 3/16" X 72", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 3/16" X 120", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/4" X 24", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/4" X 72", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/4" X 120", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/4" X 24", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/4" X 72", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/4" X 120", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 3/8" X 24", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 3/8" X 72", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 3/8" X 120", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 3/8" X 24", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 3/8" X 72", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 3/8" X 120", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/2" X 24", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/2" X 72", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/2" X 120", Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/2" X 24", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/2" X 72", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® MMD Hose – 1/2" X 120", Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® High and Low Level Sensor for one 5 or 7.5 L Tank . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® High and Low Level Sensors with Auto Refill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Disposable Desiccant Air Dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Aluminum Accumulator; High-Low Pneumatic Controls . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Stainless Steel Accumulator; High-Low Pneumatic Controls . . . . . . . . . . . . . . . . . . . . .40
Loctite® Shipping Crate – 5 Gallon Tank Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Low Pressure Fluid Regulator (30 to 200 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Low Pressure Fluid Regulator (5 to 30 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Spray Nozzle Kit – 0.014 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 69, 85
Loctite® Spray Nozzle Kit – 0.028 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 69, 85
Loctite® Spray Nozzle Kit – 0.046 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Spray Valve Seal Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Spray Valve Hose and Fitting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Spray Valve – Piston Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® PLC Program Backup/Upgrade – (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 5 or 7.5 L Tank – Vacuum Ready, Mild Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Heat Blanket Insulation – 1750 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® 250 ml Squeeze Tube Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Loctite® Pail Pump Fitting, 3/4" MNPT x 1/4" MNPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Pistol Grip, Electric Switch Option, (MMD 2000, 3000) . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Lever Actuated, 1/4" Pneumatic Switch Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Lever Actuated, 3/8" Pneumatic Switch Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Lever Actuated, 3/8" Electric Switch Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Air Operated Mounted Applicator, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® 4-Way Solenoid Valve Kit, 115 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® 4-Way Solenoid Valve Kit , 230 VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Loctite® Mounting Bracket for 989161 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Applicator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Standard Pump Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Applicator Nozzle, 1.4 mm ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Applicator Nozzle, 1.9 mm ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Applicator Nozzle, 2.4 mm ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Valve Mounting Boom – 5 or 7 Liter Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Valve Mounting Boom – 5 Gallon Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Cable, Loctite® SCARA Robot for use with Junction Box, 25 Pin, M-F . . . . . . . . . . . . .91
Loctite® Junction Box Cable for Benchtop Robots, 37 Pin MD x 25 Pin FD . . . . . .87, 88, 89, 90, 91
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 32 elements (50 pack) . . . . . . . . . . . . . . . . . . . . .82
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 48 elements (10 pack) . . . . . . . . . . . . . . . . . . . . .82
Loctite® AC Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Loctite® Teach Point Software for Loctite® Benchtop Robots . . . . . . . . . . . . . .87, 88, 89, 90, 91
Loctite® Teach Pendant for Loctite® Benchtop Robots . . . . . . . . . . . . . . . . . . . . . .87, 88, 89, 90
Loctite® PLC Interface Cable (MMD 3000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Loctite® Posi-Link™ 10-50 Cartridge Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Posi-Link™ 10-50, 10 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Posi-Link™ 10-50, 25 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Posi-Link™ 5-25, 5 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Posi-Link™ 5-25, 10 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Posi-Link™ 5-25, 25 ml Barbed Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® 200 Series Light Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 300 Series Light Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 400 / 500 Series Light Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 200 Series Workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 300 Series Workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 400 / 500 Series Workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 200 Series Slide Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 300 Series Slide Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® 400 / 500 Series Slide Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® SCARA Light Curtain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® SCARA Series Workbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Loctite® AC Charger for LED-HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Loctite® Applicator Nozzle, 1.2 mm ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Pressure Safety Relief for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Replacement Tubing for 97001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Replacement Nozzle for 97001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Nut and Sleeve for 98085 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Reservoir Lid Sub-Assembly O-Ring for 98090 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Silicone Grease – 6 gram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66, 84
Loctite® Reservoir Liner for Shot Miser™ Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Loctite® Vari-Drop™ Applicator Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81, 84
ITEM
NUMBER PRODUCT NAME
998400
998402
998425
998426
1003327
1007349
1008335
1008336
1008337
1008338
1008339
1008340
1008351
1008352
1008353
1008552
1012854
1015106
1022006
1025264
1032026
1032028
1034024
1034026
1034575
1041620
1041633
1041635
1041636
1041637
1041638
1041639
1041641
1041643
1041644
1041647
1041648
1041649
1044246
1044247
1044248
1044249
1044301
1045339
1051627
1051629
1051630
1051651
1051654
1051655
1051656
1051657
1051659
1051660
1051661
1051662
1051663
1051664
1051665
1051666
1051667
1051668
1051669
1051670
1051691
1051692
1051693
1051694
1051695
1053256
1053262
1060662
8900064
8900494
8900513
8900550
8950210
8950450
8951124
8965008
ANZ023N01
For additional information and the full line of equipment, visit www.equipment.loctite.com.
INDEX
ITEM
NUMBER PRODUCT NAME
PAGE NUMBER
Loctite® Dial-A-Seal® Applicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 13
Loctite® Pump Rebuild Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Replacement Turret . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® Replacement Cap for 1 Liter Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Loctite® LED-HD Timer Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Loctite® CureJet™ LED Dosimeter Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102, 113
Loctite® SCARA-N Robot, 444A, 4A 220V CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 91
Loctite® SCARA-N Robot, 444A, 4A, 220V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 91
Loctite® SCARA-N Robot, 444A 4A, 110V CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 91
Loctite® SCARA-N Robot, 444A, 4A ,110V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 91
Loctite® SCARA-N Robot, 443A, 3A 220V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 91
Loctite® SCARA-N Robot, 443A, 3A, 110V CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 91
Loctite® SCARA-N Robot, 443A 3A, 110V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 91
Loctite® Interconnecting Cable for CureJet™ Controller – 3 m . . . . . . . . . . . . . . . . . . . . . . . .102
Loctite® Interconnecting Cable for CureJet™ Controller – 1 m . . . . . . . . . . . . . . . . . . . . . . . .102
Loctite® SCARA-N Robot, 443A, 3A 220V CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86, 91
Loctite® Hysol™ PUR Hot Melt Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 51
Loctite® Teach Pendant for Loctite® S440 Series SCARA-N Robot . . . . . . . . . . . . . . . . . . . . . . .91
Loctite® Muti-Function Digital Controller . . . . . . . . . . . . . . .15, 17, 59, 61, 65, 66, 67, 68, 71, 72
Loctite® Fiber Optic Light Guide Radiometer Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Loctite® Static Mix Nozzle 8mm x 32E (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Static Mix Nozzle 8mm x 32E (1,000 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® 50 ml-S 10:1 Spare Plunger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Loctite® 50 ml-S 10:1 Dual Cartridge Manual Applicator . . . . . . . . . . . . . . . . . . . . . . . . . .23, 25
Loctite® Static Mixer 50 ml, 10:1-S (10 pack) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25, 82
Loctite® DuraPump™ Pneumatic MMA Custom system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Loctite® DuraPump™ Pneumatic Custom GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Loctite® DuraPump™ Programmable Custom Ratio System . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Loctite® DuraPump™ Pneumatic MMA 10:1 system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Loctite® DuraPump™ Pneumatic 10:1 GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Loctite® DuraPump™ Programmable 10:1 GP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Loctite® DuraPump™ Programmable 4:1 GP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Loctite® DuraPump™ Pneumatic 4:1 GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Loctite® DuraPump™ Pneumatic 2:1 GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Loctite® DuraPump™ Programmable 2:1 GP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Loctite® DuraPump™ Pneumatic MMA 1:1 system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Loctite® DuraPump™ Pneumatic 1:1 GP system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Loctite® DuraPump™ Programmable 1:1 GP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Loctite® Nozzle, Aero Gasket Cartridge, 10 PK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Cartridge-Syringe Adapter, 1/4" NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® 2-Hand Anti-Tie-Down Switch Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 84
Loctite® Cable Connector Plug Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Loctite® LED-HD Pistol Grip Battery Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Loctite® Needle-Cartridge Adapter, 1/4" NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Loctite® Hose Heat Controller for 1 or 2 Heated Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Low Level Sensing Option – Poly Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Low Level Sensing Option – Stainless Steel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Dual Tank Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Tank Heater and Controls Option (For Stainless Steel Tank Only) . . . . . . . . . . . . . . . . .39
Loctite® Agitator Assembly (For Stainless Steel Tank Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Follower Plate with Handle (For Stainless Steel Tank Only) . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Disposable Desiccant Air Dryer Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® 7 L Stainless Steel Gravity Tank with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® 9.5 L Poly Gravity Tank with Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® DuraPump™ Pistol Grip, Pneumatic Switch (All ratios) . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® DuraPump™ Dispense Valve – MMA with Snuffback (All ratios) . . . . . . . . . . . . . . . . .39
Loctite® DuraPump™ Dispense Valve – MMA (All ratios) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® DuraPump™ Dispense Valve – with Snuff back (All ratios) . . . . . . . . . . . . . . . . . . . . .39
Loctite® DuraPump™ Dispense Valve (All ratios) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® DuraPump™ Heated Hose Option, 144" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® DuraPump™ Heated Hose Option, 96" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® DuraPump™ Heated Hose Option, 48" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Hose for Dispense Valve – 3/8" x 96" MMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Hose for Dispense Valve – 3/8" x 24" MMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Hose for Dispense Valve – 3/8" x 96" General Purpose . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Hose for Dispense Valve – 3/8" x 24" General Purpose . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Hose for Dispense Valve – 3/8" x 144" General Purpose . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Hose for Dispense Valve – 3/8" x 96" MMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Precision Hydraulic Flow Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Loctite® Spray Timer Cable – Bulk 34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Loctite® 200 / 400 ml Mix Nozzle, Stepped, 6 mm (2,000 pack) . . . . . . . . . . . . . . . . . . . . . . . .82
Loctite® Adapter for 1/8"-28 BSPP Nozzles, 1/8" BSPP x 1/4" NPS . . . . . . . . . . . . . . . . . . . . . .77
Loctite® Tank Feed Line Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Replacement Battery Kit for Loctite® LED Light Sources . . . . . . . . . . . . . . . . . . . . . .100
Loctite® Precision O-Ring Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Loctite® PLC Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 101
Loctite® Replacement Reservoir Lid O-Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Pneumatic Supply Fitting for 97123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Valves and Advancing Slide Pneumatic Fitting for 97123 . . . . . . . . . . . . . . . . . . . . . . .84
Loctite® Pressure Sensor and Cable for In-line Flow Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Loctite® Standard Adapter / Check Valve / Jam Nut for Nozzles . . . . . . . . . . . . . . . . . . . . . . . .49
125
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising