R-735 /R-736 KETTLES Instructions manual 1. Hinged lid 2. ON/OFF

R-735 /R-736 KETTLES Instructions manual 1. Hinged lid 2. ON/OFF
MODELS: R-735 /R-736
Instructions manual
1. Hinged lid
2. ON/OFF Switch
3. Pilot light
4. MAX water level indicator
5. Cordless power base
6. 360’ connector
When using your kettle, basic safety precautions should always be followed, including the following:
1. Read all instructions carefully, even if you are familiar with the appliance.
2. Close supervision is necessary when any appliance is used by or near children
3. Before connecting the kettle, check if the voltage indicated on the appliance corresponds with the mains voltage in your
home, if this is not the case, contact your dealer and do not use the kettle
4. Switch off and unplug from the outlet before filling, emptying or cleaning, or when not in use.
5. Do not overfill as boiling water may be ejected. The maximum level is marked inside the kettle
6. Do not operate or place any part of this appliance on or near any hot surface (such as gas or electric burner or in a
heated oven)
7. Do not let the cord hang over the edge of a table or counter. Do not let the cord touch hot surfaces.
8. Never yank on the cord as this may damage the cord any eventually cause a risk of electric shock.
9. If the supply cord of this appliance is damaged, it must only be replaced by a repair shop appointed by the
manufacturer, because special purpose tools are required.
10. Avoid touching hot kettle surfaces-use the handle and the knobs.
11. To avoid possible steam damage, turn the spout away from walls or cabinets when operating the kettle
12. If operated on wood furniture, use a protective pad to prevent damage to delicate finishes.
13. To avoid scalding, always ensure the lid is correctly positioned before operating
14. Scalding may occur if the lid is removed whilst heating
15. Extreme caution must be used when moving the kettle containing hot water, never lift the kettle by its lid. Always use
the body handle
16. Do not switch your kettle on if it is empty
17. To protect from electrical hazard, do not immerse this kettle or cord set in any liquid.
18. Use the kettle only with the supplied base unit; do not use the base unit for other purposes.
19. To protect against fire, do not operate in the presence of explosive an/or flammable fumes.
20. A kettle should not be left connected to a wall socket when the room temperature is likely to fall to outdoor winter
temperatures, at sub-zero temperatures the automatic control thermostat may reset to boil and energize the element.
21. Do not use the kettle for any purpose other than heating water; other liquids or food will contaminate the interior.
22. This product has not been designed for any other uses than those specified in this manual.
WARNING: compare the local voltage with the voltage declared on the device, adjust the correct voltage before plugging
the unit
1. Before first use, fill the kettle with clean water to maximum capacity and boil, discard the water and repeat
2. The kettle should always be unplugged when filling or adding water
3. Fill the kettle with water to the desired level, do not overfill or there will be a risk of spillage or spitting. Do not forget to
close the lid after filling; otherwise the kettle will not automatically switch off after use.
4. Do not fill with less than 0.5liter of water (up to “MIN” indication) to prevent the kettle running dry while operating
5. Do not fill with more than 2.0liter of water (up to “MAX” indication)
6. An automatic safety cutout has been fitted for protection against overheating; it will operate if the kettle is switched on
then containing insufficient water. Always ensured that the water inside the kettle covers the minimum mark .if the
automatic safety cut-out has operated, disconnect from the power outlet and allow the kettle to cool down for 5 to 10
minutes, then refill with water and switch on-the kettle will then boil and cut off as in normal operation
7. Place the power base on a dry flat surface
8. Place the kettle on the power base, the electrical connections will be made automatically as the kettle slides onto the
power base
9. Plug the cord set into an earthed power socket
10. The appliance is switched on by pressing the ON/OFF switch, the pilot light will come on
11. When the water has boiled, the kettle will switch off automatically
12. Do not remove the kettle from the power base without switching off first
13. To pour water, lift the kettle from the power base and pour
Wipe the exterior of the kettle with a soft, damp cloth or sponge, remove stubborn sports with a cloth moistened with mild
liquid detergent, do not use abrasive scouring pads or powders, never immerse the kettle in water or other liquids
From time to time depending on the nature of your water supply, a limescale deposit is naturally formed and can be found
mostly adhered to the heating element and reduces the heating capacity, the amount of limescale deposited (and
subsequently the need to clean or descale) largely depends on the water hardness in your area and the frequency with
which the kettle is used.
Limescale is not harmful to your health, but if poured into your beverage, it can give a powdery taste to your drink, therefore,
the kettle should be descales periodically as indicated below:
Descale the kettle regularly, with normal use, at least twice a year.
1. Fill the kettle up to “MAX” with a mixture of one part ordinary vinegar and two parts water, switch on and wait for the
appliance to switch off automatically
2. Let the mixture remain inside the kettle overnight
3. Throw the mixture away next morning
4. Fill the kettle with clean water up to “MAX” and boil again
5. Throw away this boiled water to remove any remaining scale and vinegar
6. Rinse the inside of the kettle with clean water
The 360’connecotr between the kettle and its base means that the kettle can be located at any point on the base. This is
ideal for left and right-handed users as the kettle can be positioned conveniently on your kitchen counter.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health,
deriving form inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in
energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked
with a crossed-out wheeled dustbin.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF