Equipment - OESCO, Inc.
TRAK MATS
COVER MORE GROUND WITH TRAKMAT®
TrakMat is a 1/2” thick polyethylene mat made from 100% recycled
material, & is used to support heavy equipment on grounds or turf.
polyethylene is very flexible & will hold up to 60,000 pounds. use with all
kinds of vehicles (no steel tracks).
The mats are uV protected & not affected by hot or cold. The light colored
mats stay cool & are manufactured in convenient sizes to fit the job. we
recommend the width of the mat should be at least 1/3 wider than the widest
tire on the vehicle, so the driver can stay on the mat & the load can be
distributed to the ground. Hand cutouts are provided to assist lifting the mat.
TrakMats will not absorb water, will not dry rot and are not affected by
oil, gas, or other chemicals. no more heavy, wet, rotten, broken, slippery
plywood! guaranteed against cracking and breaking for 3 years from date of
purchase. To clean, simply wash with water.
lIgHT:
TRA TM2296
TRA TM3696
TRA TM4496
22 1/4” x 8’ x 1/2” • 39 lbs.
36” x 8’ x 1/2” • 64 lbs.
44 1/2” x 8’ x 1/2” • 78 lbs.
BlAcK
(for use in mud conditions or where damage
to lawns is not a concern):
TRA TM2296B 22 1/4” x 8’ x 1/2” • 39 lbs.
TRA TM3696B 36” x 8’ x 1/2” • 64 lbs.
TRA TM4496B 44 1/2” x 8’ x 1/2” • 78 lbs.
No ruts
No damaged lawns
No damaged grounds
No weather delays
No damaged plywood
3-Year warranty
Strong, flexible & easy to use
Use with ALL KINDS of vehicles
(no steel tracks)
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
41
VENTRAC TRACTORS
Introducing the Ventrac 4500
Over 40 attachments to choose from!
cAll FOR A dEMO
See Ventrac tractors in action
4500p tractor shown
with optional dual Turf
Tires and MJ840 84”
contour Mower
Models Available
ONE TOUGH TRACTOR
There is no doubt that the
Ventrac 4500, an incredibly agile
yet power-packed tractor, is in a
class of its own. An innovative
design combines all-wheel drive,
an articulating frame and powerful
engines to give you unmatched
stability and control.
A 4-Season Tractor – As the seasons change, so does your Ventrac!
42
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
VENTRAC TRACTORS
3400
BEsT OF BOTH wORlds
When you need the power and versatility
of a compact tractor, but want the
maneuverability and visibility of a zero
turn mower, the Ventrac 3400 will give
you the best of both worlds and more.
Engineered with an innovative articulating
frame, the 3400 tractor is the industry’s best
combination of visibility, maneuverability,
power and versatility. Find out how this ideal
combination can turn the work you have to
do into the work you love to do.
Call for a
Demo
compact power
sidewalk snow Removal
The 3400 is the perfect size for
maneuvering quickly on sidewalks, yet
powerful enough to move heavy snowfalls.
Models Available
Over 20
Attachments
Available
Tough & Rugged
Field Mower
The preferred choice of tree farmers, the
field mower makes short work of clearing
the rough areas of thick weeds, tall grass
and brush.
world-class cut
3400y Tractor & lM600 Finish Mower
Professional mowing contractors around the
world trust Ventrac for the
highest quality cut.
Versatility
chore Tractor
Chores are made easy with Ventrac.
Whether it is landscaping, aerating or mowing,
Ventrac has the attachment you need.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
43
VENTRAC TRACTORS
BEsT OF BOTH wORlds
3400
THE ULTIMATE TREE MOWER
A unique mower designed to maintain grass and small brush
growth on tree farms, nurseries and blueberry farms
VEnTRAc 3400 wITH TREE MOwER - lQ450
• All wheel drive
• Tree deck 45”
• Hydro lift
• 3 cutting heights - 2 1/4”, 3 1/2”, 4 3/4”
• Branch lifters & tire covers - standard
• Rear engine design, less heat/noise/exhaust
• Counter rotating blade, rear discharge:
leaves clippings in middle
• 26” turning radius
• Suspended front chains, cuts tall grass
more effectively, and reduces potential of
front discharge
• Single swivel front tire
• Optional weed sprayer shown below
GAS OR DIESEL
ENGINE OPTIONS
VEnTRAc 3400 spRAyIng unIT
• Tank: 16 gallon polyethylene
• Pump: 2 GPM, 12 volt diaphragm pump
• Pressure: Manual adjustable bypass
• Spray Nozzles: Single swivel nozzle bodies mounted
one each side of tractor. Adjustable in width / height
• Controls: Independent nozzle controls right or left
• Valves: Manual valves
• Steel Framework: Easily attaches to tractor hitch
• Tips: Standard, off-center flat fan, other tips
available as options.
sET Ventrac-3400-12V
• Electric on/off control
VENTRAC WITH LC150 STUMP GRINDER
AVAILABLE FOR 3400 Series Tractors
• The LC150 stump grinder features 12 replaceable carbide cutting teeth.
• Adjustable blade hydraulically lowers to double as a jack stand and depth gauge.
• Rotor tip speed: 2,475 ft./min -– Engine speed of 3200 RPM
• Cutting depth below ground level: 6”
Ideal for grinding stumps in the tight quarters of a
choose and cut operation.
44
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
FERRI / SUNDOWN FLAIL MOWERS
Ferri offset flails work well for long reach or ditch bank mowing. Flails lift to 90° vertical or
down to -50°. Safe and perfectly balanced, allowing for careful working even in difficult situations.
ME and MT mowers for grass and light brush include adjustable rear roller, internal sealed rotor
bearings, double skin and cast iron gear box.
FERRI ZMT Offset in-line slope mowers For
Agriculture & Roadside - Tractors from 60 - 80 HP
FERRI ZME Offset in-line slope mowers
Specifically for compact tractors
ZMTE1600 — 60-70HP, 5’11” cut width
ZMTE2000 — 70-80HP, 7’5” cut width
ZME125 — 18-30HP, 4’1” cut width
ZME155 — 25-40HP, 5’1” cut width
FERRI MT Mowers For grass & twigs
FERRI ME Mowers For grass
MT140 — 30-45HP, 4’7” cut width MT180 — 45-60HP, 5’11” cut width ME125 — 20-25HP, 4’1” cut width
MT160 — 35-50HP, 5’3” cut width MT200 — 50-70HP, 6’7” cut width ME155 — 25-30HP, 5’1” cut width
Sundown FM Series Flail Mowers. Rugged mowers at a great price
All models come standard with hydraulic side shift and shredder knives. Hammers can be
purchased as a spare part.
FM-145 – 30-60HP, 58” cut width, 831 lbs.
FM-160 – 35-60HP, 63” cut width, 890 lbs.
FM-175 – 40-60HP, 69” cut width, 945 lbs.
FM-205 – 45-60HP, 81” cut width, 1,070 lbs.
FM-220 – 50-60HP, 93” cut width, 1,145 lbs.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
45
REARS OMF FLAIL MOWERS
OMF FlAIl MOwER
OMF-750 sERIEs
• Super-duty low profile Flail Chopper
• 2 3/4 lb. hard faced hammers mounted on 3/4”
Grade 9 bolts with 1 1/2” mount pads
• 2.4375” spherical roller main bearings
• Double wall housing 3/8” liner under 3/16” skin
• 24” hydraulic offset standard
• Floating top link pad
• Cutting width from 4’-9’
• Heavy duty - 6’-2,154 lbs., 7’-2,350 lbs.,
8’-2,550 lbs.
• Options: Push/pull mount
• Standard or low profile models available.
OMF Flail Hanger
The Series 750 OMF flail
uses a double row spherical
roller bearing with oversized
rollers and an eccentric
locking collar. This rotor
bearing is nested in a
labyrinth grease seal.
Call about the availability of rebuilt equipment as an economical option to new!
REARs FROnT MOunT
Run the slopes with Rear’s Front Mounted Pak-Flail.
Pak-Flail mows grass, eats brush and small trees. Leaves a
covering of mulch, an ideal light bedding easily covered by
the first snow.
46
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
REARS SPF / IFA FLAIL MOWERS
spF FlAIl MOwER
• The lowest horsepower available in
tractor restrictive plantings. Ideal for cane,
berries, Christmas trees, ski resorts,
parks, golf courses, nurseries.
• 3-point mount, centered or offset.
24 to100 inch cutting widths.
• Options: Low-profile unit. Hydraulic offset.
Front mount unit. Push/pull mount. Right
hand drive. Narrow vineyard profile
• 0 to 6 inch cutting height.
• Grass-blades and shredding knives.
A
B
A
B
c
A - FL920 Super-TUF hardened grass blade
assembly for a finish cut
B - FL960 shredding knife assembly for a coarse
cut in grass and for shredding light brush
C- FL940 crop chop knife for heavy mowing and
brush shredding
c
A - left hand drive, fixed right offset
B - left hand drive, fixed center mount
c - left hand drive, hydraulic pantograph
The FL920 and FL960 blade assemblies are easily
replaceable without a wrench or socket. Simply
turn the D-ring hanger and slip off the blade.
OESCO is one of the top REARS dealers in the world!
IFA FlAIl MOwER
use this machine in place of the spF model where conditions are more
rugged and work duty is higher.
The IFA is a heavier duty bumped housing flail. This machine features a beefed up gearbox,
rotor and roller bearings, belt tensioning and a thicker housing panel.
Visit our website for REARs flail
mower specification sheets, at
www.oescoinc.com
CALL, EMAIL OR WRITE FOR
SPECIFIC INFORMATION ON ANY
FLAIL MOWER.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
47
FISCHER MOWERS
Manufactured in Italy
FIscHER sl MOwER
SL
Fischer’s SL series orchard mowers are rugged, compact and
low profile. They are ideal for low-hanging fruit. The swing arm
is available in either mechanical or hydraulic sensing retraction.
The hydraulic sensing style uses the tractor hydraulics to set
the width, then the self contained sensing system moves the
arm around even the smallest trees with no damage. All SL
models include 30” hydraulic linear side shift.
sl3-140-190
Spindles:
Min Tractor HP:
Min Width:
Max. Width:
Weight:
2
30
65”
76”
726 lbs.
sl3-230-280
Spindles:
Min Tractor HP:
Min Width:
Max. Width:
Weight:
3
40
91”
110”
924 lbs.
sl3-180-230
Spindles:
Min Tractor HP:
Min Width:
Max. Width:
Weight:
3
30
72”
92”
814 lbs.
sl3-310-360
Spindles:
Min Tractor HP:
Min Width:
Max. Width:
Weight:
4
60
122”
142”
1188 lbs.
Great for mowing around standing
solar panels!
Manufactured in Italy
FIscHER slF MOwER
SLF
The Fischer SLF Series features a simple design, a low, smooth deck
& a long reach. Get maximum cut under trees for a minimum price.
slF 235
Cut:
Spindles:
Min HP:
Max. Offset:
Weight:
92”
3
35
94”
814 lbs.
* Max offset is measured
from the center of
the tractor
Manufactured in Italy
UNICO
FIscHER unIcO swIng wIng MOwER
The unique design of the Unico allows for a wide cut width when
extended yet only a 43” cut width when the arm is retracted. This
model includes hydraulic offset hitch, swivel wheels, and precision
sensor to mow quickly and carefully.
unIcO – 900Rs
Min Cut:
43”
Max Cut:
75”
Max. Offset: 48”
Spindles:
2
Min HP:
35
Weight:
870 lbs.
48
Other sizes available
for all mowers on
this page.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
FISCHER ORCHARD / VINEYARD MOWERS
Manufactured in Italy
FISCHER GL4 MOWER
GL
The Fischer GL4 features two
precision-sensing, hydraulicallycontrolled swing arms, a selfcontained hydraulic system and
height adjustable rollers, making
it an ideal mower for vineyards,
tree plantations, nurseries and
high-density orchard plantings.
The GL4’s ability to mow carefully
within the row is particularly helpful
to growers whose management
program does not include the use of
herbicide strips. Available in a wide
range of sizes.
Pictured with optional Herbicide Kit.
gL4/60-180-280
Spindles: Min Tractor HP: Min Width:
Max. Width: Weight: 4
40
71”
110”
858 lbs.
gL4/90-220-380
Spindles: Min Tractor HP: Min Width:
Max. Width: Weight: 4
60
87”
150”
1177 lbs.
Scan for Fischer mower videos and spec sheets
Manufactured in Italy
FISCHER BV2 MOWER
BV
The BV2 is a versatile mower for fruit
plantings of all types — tree fruit,
grapes or berries. The BV2 features
a continuously variable hydraulic
width adjustment as well as hydraulic
side-shift. It is an ideal machine
for variable width plantings where
the management plan incorporates
herbicide strips.
Fischer BV2 Features:
• 3 pt. hitch mount
• Hydraulic width adjustment
• Hydraulic side shift
• Three over-sized cast gearboxes
• Heavy duty steel plate deck
• Two counter-rotating blade rotors
with 4 swing-mounted mower blades
• Chain guards, front and rear
Pictured with optional Herbicide Kit.
BV-160-230
Spindles: Min Tractor HP: Min Width:
Max. Width: Weight: OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
2
40
63”
91”
1078 lbs.
49
ROTARY MOWERS
DURABLE AND ECONOMICAL
ROTARy MOwERs
40 Hp gearbox • stump Jumper pan • laminated Tail wheel • cat IV drive line • cat I 3-point Hitch
540 RpM pTO • Adjustable wheel Height • Optional chain guards • Optional slip clutch
40” EcOnOMy cuTTER
ROundBAcK ROTARy cuTTER
Economy Cutter with 10 gauge Formed Deck
Tc07-40
with 10 gauge Formed Deck
Models Available: Tc10-400(4’) — Tc10-500(5’) — Tc10-600(6’)
FInIsH MOwERs
ROTARy MOwERs
sERIEs RF
3 pt hitch with swing arm.
Low construction to clear fruit
branches, parallelogram for
offset adjustment. Front
swivel wheels to adjust to
terrain, large rear roller, swing
arm to cut around tree trunks.
Optional: hydraulic offset,
swing blades, feeler bar.
specifications:
Right offset only
MOdEl
RF-220
Cut Width
7’3”
Offset from Ctr.
7’1”
Min. HP
22
Weight-Lbs.
905
RF-220 3pt w/
cutting width 7’-3”
RF-300
9’10”
8’4”
30
1135
sITREX THREE spIndlE FInIsH MOwERs
Suitable for parks, golf courses, athletic fields, farming & highway
maintenance. 12-40HP, fully floating 3 pt. hitch to obtain best
cutting finish (even on undulating ground). All rear discharge
models are fitted with safety chains.
Model
sM 120 p
sM 150 p
sM 180 p
Cut Width
48”
60”
72”
Cut Height
1”-4”
1”-4”
1”-4”
HP Required
12-20
15-30
20-40
sERIEs ZA
Trailed rotary mower
with swing arm. Trailed
from the drawbar on the
tractor, these machines are
capable of large offset. Two
large tires and one swivel
support mower to give high
quality cutting. Swing arm
cuts easily around fruit
tree trunks. Lengthways
transport featured for large
machines.
specifications: left offset only.
MOdEl
ZA-300
Cut Width
9’10”
Offset from Center
9’1”
Min. HP
30
Weight-Lbs.
1115
50
ZA 300 Rotary w/
cutting width 9’-10”.
ZA-340
11’2”
10’10”
35
1230
ZA-380
12’6”
11’10”
40
1345
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
BROWN / BUSH HOG ROTARY MOWERS
RUGGED MACHINES THAT CAN HANDLE HEAVY CUTTING
ROTARy MOwERs
410 sERIEs ROTARy cuTTERs
cut up to 2” diameter.
cutting width: 415 = 5’ | 416 = 6’ | 417 = 7’
• Reinforced round back deck
• Quick hitch compatible
• Height to cut: 2” to 12”
• Deck construction: Welded
7 ga. steel 3/16”
• Gear box ratio: 1 to 1.5
• Blades: 1/2” x 4” heat treated
and free swinging
• Stump jumper: 1/4” bowtie disc
w/ 1” x 5” solid bar
• Replaceable rubber deflectors
• Chain curtain: Front/rear 5/16”
• Castering tail wheel: 1
• Gear box rating: 130 HP
• Quick hitch compatible Cat I / II
• Drive shaft: Size 5
• Slip clutch: 2 disc fully shielded
• Slides (Replaceable): 1/4” x 2”
Steel
• Required HP: 30 HP - 40 HP
672Hd sERIEs ROTARy cuTTERs
Tough enough to cut heavy brush & trees up to 4” diameter
• Cutting width: 6’
• Cutting Height: 2” to 12”
• Deck width: 81”
• Deck thickness: 1/4”
• Gear box HP @ RPM:
145 HP gear box @ 540RPM
• Blade bar / solid plate: 1-1/4”
• Blade bar weight: 225 lbs.
• Blade (Ultra-Kor): 5/8” x 6”
• Tail wheels: Single
• Hitch with Flex Link Clevis Type:
Cat. II
• Drive line - shielded: Size #8
• Slip clutch: 4-disc
• Horsepower / Minimum: 60 HP
• Slides: 5/8” x 2-1/2”
• Blade tip speed: 15,260 FPM
173.4 MPH
• Weight: 1,720 lbs.
Brown Rotary cutters are engineered to give you years of dependable service and performance.
perfect for pasture clipping and stalk cutting.
sInglE spIndlE sERIEs
These are the cutters that started it all and made
Bush Hog a household name. From economy cutters
for small tractors to heavy-duty shredding mowers for
row crops and pastures, all are built to last.
RAZORBAcK sERIEs cuTTERs
Decks are designed to eliminate trash build-up and
water traps. Full swivel tail wheel(s) provide height
adjustment, and blade pans furnish protection from
field hazards.
BH10 sERIEs ROTARy cuTTERs
• Minimum tractor HP: 15-30 PTO
• Cutting capacity: up to 1” in diameter
• Cutting widths: 4’ –6’
• Minimum tractor HP: 15-50 PTO
• Cutting capacity: 1” to 2”
in diameter
• Cutting widths: 4’ –7’
BH20 sERIEs ROTARy cuTTERs
320 sERIEs ROTARy cuTTERs
• Minimum tractor HP: 35-55 PTO
• Cutting capacity: 3” diameter
• Cutting widths: 5’ –7’
• Minimum tractor HP: 60-70 PTO
• Cutting capacity: 4” diameter
• Cutting widths: 6’ –7’
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
51
PLANTING AND TILLAGE
F SPEDO
.LLI
The Spud Buddies
PLANTING OR HARVESTING: SO SIMPLE WITH SPEDO
spEdO “BABy” AuTOMATIc plAnTER
• Attaches quickly and easily to any 3 PT Hitch
• Great for small to medium-sized plots
• Easily adjusted planting distances of 10 - 16 inches
• Chain-driven cup conveyor pulls tubers from hopper, settles them in uniform rows
• Rotating discs evenly hill rows behind the machine
sdO spA-T
spEdO AuTOMATIc
pOTATO HARVEsTER
• Designed for compact tractors with a 3PT Hitch & PTO
• Get potatoes up & out easier than ever
• Adjustable-depth front end plowshare & vibrating sieve
• Anti-vibration rubber bushings provide extra comfort &
stability while working
sdO cpp-T
TAndEM dIsc HARROws
dH300 sERIEs
Built to last with quality parts. Available in widths of 60”, 72”, and 84”. 18”
notched front and smooth rear blades. 3” square tube frame, self-aligning
bearings. Cat I 3 Pt. Hitch.
suB-sOIlER
MOdEl 100
Great for ripping sod,
and loosening compact
soil for better plant
growth. Single Shank
Ripper, Cat 1 Pins,
1” x 4” x 19”, 2-position
shank, hard faced point.
14” ripping depth.
Model uM
Medium duty
Model ul
light duty
ROTARy TIllERs
3 MOdEls AVAIlABlE: ul, uM, uH
Working widths from 36”-84”. HP requirements from 15-65.
All gear driven side transmission, adjustable skid shoes and
powder coat paint.
52
Model uH
Heavy duty
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
3PT & LOADER FORKS
NEW!
IlMER K2-d195 HydRAulIc FORKlIFT ATTAcHMEnT
•
•
•
•
•
3 pt. hitch
Open view mast for fast, safe operation
2 lever, 8 function control valve
Nitrogen accumulator on lift cylinders for shock absorption
Variable box brackets to stabilize bins for transport
dolly
BEST SELLER!
pAK FORK
Haul pallets of fencing, fence posts, hay & feed. Transport tote
boxes of fruit & vegetables. Move irrigation pumps & small
buildings. That’s why it’s called the “All-Around-Farm-Tool”!
• Constructed from 2”X4” rectangular tubing
• Weight: 98 lbs. - truck freight
• 3 pt. hitch Cat. 1
• Hooks up FAST
• 26” wide, 44” load length, 1000 lb. capacity
REA pAKFORK
•
•
•
•
•
controls
2,860 lb. lift capacity
78” lift height
Hydraulic side shift
Hydraulic tilt
Storage dolly
nitrogen Accumulator
3-pOInT TRAns-pORTER
Cat. I, 3 pt. hitch. Low cost device designed to lift
bulk bins, feed, baled hay - almost anything,
including other implements.
• Lifting height - up to 16”
• 46” solid steel forks • Tilts 10° at max. lift height
Edw Tp6412 - 1500 lb. capacity
For more models and detailed
information please contact us.
FORK
CTI forks eliminate the need for
a separate forklift: they adapt to
the loader bucket of a farm tractor,
backhoe or industrial loader. Solid
steel forks attach to the bucket
top lip with welding brackets. A
connecting bar holds the tines;
when the bucket is rolled back,
the forks are attached. The tines
adjust, no hardware or chains
are necessary. See price list for
models.
• Expand machine usage
• No hardware or chains needed
• Adjustable tine spacing
• Attaches in seconds
• 7 sizes
• 2,500-22,000 lb. capacity
clAMp-On BucKET FORKs
3 pT. HITcH lEAF &
dEBRIs BlOwER
BlIZZARd
AgRIculTuRAl
snOwBlOwERs
3800 CFM @ 260 MPH. 20-40 PTO
HP recommended. 225 degree air
nozzle rotation w/ manual deflector.
Heavy duty spiral gearbox drive with
12 blade fan. Cat I 3 Pt. Hitch with
parking stand.
RAdTEcH Model 9424B
Five models from 1,000 to 6,000 lb.
capacity. Mounts in seconds without tools,
equipped with handles for easy
mounting, adjustable handles & safety
rated at twice the capacity.
Models BF-1000, BF-2000,
BF-3000, BF-4000, & BF-6000
TRAsH FORKs TF sERIEs
A handy tool that will make moving tree
braches & other debris an easy task. These
new quick on & off Clamp-On Trash
Forks will increase your front end
loader’s versatility. Available for
4’ to 6’ wide buckets.
Models TF48, TF54, TF60, TF66, TF 72
48”-94” width, for 15-75 HP tractors.
Manual or hydraulic rotation.
Contact us for
details & options
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
53
LANCO ROW MULCHERS / SPREADERS
Lanco’s line
of “Crop Care”
Row Mulchers
offer
UNSURPASSED
MULCHING
VERSATILITY
RENTAL AVAILABLE
Model LS-1450
cROp cARE ROw MulcHERs
The crop care™ Row Mulcher by
lanco lets you apply mulch in a
wide range of applications. you can
apply a pattern that is up to 48” wide
and 1/2” deep, or 12” wide and 8” or
more deep, depending on material
conditions and travel speeds. Ten
year warranty on poly lumber deck.
ls-1450
OTHER MODELS AND
CAPACITIES AVAILABLE.
• 5.4 yards, heaped - 6000 lb. cap.
• 30 HP tractor required
• 96” Hopper length
• 36” Hopper width
• Fully adjustable tilting conveyor
• Dual directional delivery system
• Mulch from both sides
• Body: 12 gauge galvanized steel
• Allows almost any kind of material.
• 2-way conveyor
• PTO Hydraulic drive
• Fine chain
Cross beam supports.
• Manual endgate
Tilt control
Dual directional belt
5-In-1 supER spREAdER
with Interchangeable spreader
Attachments
The lanco 5-in-1 super spreader is a
state of the art spreading machine for
spreading many kinds of material.
The 5-in-1 features interchangeable spreader
attachments, 2.4 yd. (65 ft.) capacity, drive via
tractor.
• Hydraulic (requires 8 GPM)
• Maximum payload 8,300 lbs.
• W 67” x H 70” x 157”L
• Apron Chain with 3-1/2” slat opening spacing
• Rack & pinion end gate
• Agricultural rib tire (11L x 15, 8 ply)
• Net weight 2,300 lbs.
lcO BT01 - Beater Attachment
lcO BR01 - Brush Attachment
lcO cc01 - cross conveyer (l or R) crescent Belt
lcO cc30 - cross conveyer (l & R) w/2 cc20 deflector Kit
OTHER OPTIONS
lcO dd01 - dual disc Attachment
ARE AVAILABLE.
54
For straw manure
For top dressing turf (sand or mulch)
For row mulching
For row mulching L & R at same time
For fertilizers and compost
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
3PT & PULL SPREADERS
ACCURATE & PRECISE
super Flow spreaders from
Vicon fulfill all requirements for
a long service life. The glass
fiber reinforced polyester hopper
and stainless steel meter disc
is unaffected by aggressive
types of fertilizer. The spreading unit and frame use
the unique duracoat powder painting system for
exceptional corrosion resistance. The bearings of the
spreading unit have easily accessible grease fittings
for maximum ease of maintenance.
ps403
The spreader is shipped
with one standard
broadcast spout.
ps 225
dM
ps 403
VITI
ps 403
dM
ps 604
dM
500
5.9
950
14.1
950
14.1
1400
21.2
Many spout options are available
for banding and narrow spread patterns.
Filling Height
4.7
32”
11.2
35”
11.2
35”
16.9
38”
Machine (lbs.)
163
267
267
320
Call for options like covers, agitators, and
hydraulic controls and hopper extensions.
Model
Hopper (lbs.)
Cubic (ft.)
Bushels
Models at right shown with hopper extensions.
ps225
Larger sizes available by special order
pTp pull-TypE
spREAdER
2-wheeled pull type spreaders
to be trailed with ATV or tractors
provided with ball hitches.
Long lever for opening exits
shutters set from ATV directly.
Suitable for lawns, golf courses
and medium size areas.
sTAndARd EQuIpMEnT:
• primed and two components
polyurethane finish
• e-coated disc and fins
• two lateral discharge exits with
galvanized shutters
• 1, 7/8” coupler
• wheels 16 x 6.50
pl pOly spREAdERs - 3 sizes
• Category I, 3 PT Hitch, 540 RPM PTO
• Corrosion proof poly hopper
• Stainless steel spreading disc with 4 steel vanes
• Choice of 3 spread patterns, full center, left or right side
• Spreading rates from 20 to 900 lbs. per acre
• Optional spread width limiter
MOdEl
Capacity
Height
Weight
Spread width
Width
pl180
pl400
350 lbs
650 lbs.
33”
42”
119 lbs.
132 lbs.
(
on all: up to 49’
35”
41”
pl500
840 lbs.
44”
139 lbs.
)
43”
MOdEl
pTp 180
pTp 300
Capacity
350 lbs.
560 lbs.
Height
50”
56”
Weight
175 lbs.
183 lbs.
Max. Spreading
Width
46” granular
46” granular
Ball Hitch
1, 7/8”
1, 7/8”
Transmission
1:3,25
1:3,25
Width
41”
41”
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
55
REVO PICKING MACHINE
REVO IS HERE AND THE PICKIN’ IS EASY
The REVO Piuma 4 WD
• Individual conveyors: workers can
pick at many levels
• Highest picking level: 13’ reach
• Highest quality fruit: main conveyor
transfers apples seamlessly into bin
• Accepts most bins, including wood &
plastic
• Adjusts easily: switch bin styles / sizes
• Removable air compressor for use
with air pruners
• Self contained power and mobility
• Remove harvesting unit for pruning
or trellis work
For High Density Apple & Pear Orchards
• Small stature: 12’-6” footprint
• Compact: No bulky trailer to pull
• Highly maneuverable: independent front
and rear steering and crabbing is great
for tight turns in small head rows
Versatile, Quiet and Stable
Scan to see the
REVO in action!
• 4-wheel drive system
• Fully automated in the row: auto-drive,
auto-leveling, auto-steering
• Whisper-quiet fuel efficient diesel engine
CALL OESCO FOR A
DEMONSTRATION
AT YOUR ORCHARD!
56
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
PLUK-O-TRAK FRUIT HARVESTING MACHINE
TRY THE VERSATILE PLUK-O-TRAK FOR HARVESTING, PRUNING & MORE!
This multi-purpose machine, manufactured in the netherlands, can be
used for harvesting, pruning and trellis work -- in all seasons. great for
large trellised orchards with trees up to 13’ tall.
Increase Fruit Quality
up to 60%
Bin filler ensures that large
bins are filled evenly, without
bruising fruit
SENIOR MODULAR UNIT
Sinds 1884
Push Button
Controls
Sort the Fruit
Presort bin for culls
Push Button
Controls
Removable
Conveyors
Compressor
Remove conveyors
for pruning
Onboard air
compressor for
pneumatic tools
Ultrasonic
“Sense-O-Matic”
Steering System
Increase Pickers’ Efficiency
Four (4) hydraulic adjustable picking
platforms to pick at various levels
Leveling & Stability
Hydraulic leveling suspension.
Auto-leveling on Modular Model.
Senior Standard Unit
See the
Pluk-O-Trak
in action
Modular Unit Push Button Controls
CALL OESCO FOR A
DEMONSTRATION
AT YOUR ORCHARD!
2 or 4-wheel drive
Can be used in snow
Self-propelled
Extremely quiet
Speed from 0 - 2.5 mph
Access to fruit at all levels
Extremely versatile!
Used in orchards for 40+ years
Bin Trailer
Holds up to 16 bins.
OESCO, Inc. Route 116, Conway, MA 01341 • 413-369-4335 • 800-634-5557 • Fax 413-369-4431
www.oescoinc.com email: info@oescoinc.com
57
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising