Entry-level Digital Video/Audio Recorders Quick Reference

Entry-level Digital Video/Audio Recorders Quick Reference
Entry-level Digital Video/Audio Recorders
Quick Reference
SOC2-90n-DVR-Q76000E
1
Before Turning On The System
 Please install SATA HDD(s) in the Hard Disk Tray. (Sec. 3.1)
 Please set the NTSC/PAL Selector Switch (on the mainboard) according to
the local TV system. (Sec. 2.2)
 Please refer to Chapter 3 for all connections.
After Turning On The System
 Please wait for a while for the system to start up.
 Please login the system (Sec. 4.2), and then physically format the HDDs
(Sec. 6.6.1). (Please note that the HDD cannot be used for recording if it
is not formatted yet.)
 Please refer to Sec. 6.8 and Appendix B to set the time zone of the system.
 Please refer to Section 4.1 to enter text.
 Please refer to Section 4.3 for all basic operations.
 Please refer to Chapter 6 to setup the system correctly, esp. Section 6.8 for
Time Zone, DST & Language.
 Please refer to Chapter 8 to search, playback, and archive the recorded
video/audio.
 Please refer to Sec. 2.2, 6.10, and Chapter 9 for remote access via internet or
intranet.
 Please refer to Sec. 2.2, 6.1, 6.9, and Chapter 7 to control the PTZ cameras
correctly.
 Please refer to Sec. 2.2, 3.2, 6.9, and Appendix C to use the keyboard
controller or terminal correctly.
 Please refer to Appendix D or Recording-table.xls for the estimated recording
time.
 Please refer to Appendix E for the bundled MS-Windows utilities.
2
Login The System
 Login / Logout : MENU->Login/Logout
Setup The System
 Format HDD : MENU->Setup->HDD->Format HDD (MODE)->Physical
Format (CALL)
 Change Time Zone, Language : MENU->Setup->System->Time Zone,
Language
 Setup PTZ, Keyboard : MENU->Setup->RS-232/422/485->Device Type, ..
 Setup Network : MENU->Setup->Network->Net Type, Static IP or PPPoE, ..
 Change Network Port : MENU->Setup->Network->Adv.
Basic Operations




Change Split Window :
+/Change Live / Playback mode : MODE
Move Focus : ▲, ▼, ◄, ►
Connect / Disconnect Backup Device : MENU->Backup Device->Connect /
Disconnect
 Search/Playback/Archive : Search->Search By Time, Smart Search, ..
 Search By Time : Select the start time & video type, and

Play :
, MODE, Search

Backup :
 Search By Event : Select and move to the event, and

Play :

Backup :
 Smart Search : Select the camera, area covered by the motion occurred, and
start/end time, and press SEARCH or MODE to search the matched files.
Select and move to the file, and

Play :

Backup :
 Search Archived File : Connect Backup Device (by pressing ENTER in
Device), and select and move to the file, and

Play :
 Backup : Connect Backup Device (by pressing ENTER in Device), and select
3
cameras, end time, etc., and


Backup :
Stop Backup :
Remote Access -> Before Logging On
 Set the domain name or IP address of the DVR as trusted web site in your
I.E., and the (https:) server verification for trusted web site as unchecked
(Tools->Options->Security in I.E.). For I.E. 7/8, please set the Security level
for this zone to Low.
 If the PC has used I.E. to access earlier software version of DVR, please go
to Tools->Options->General in your I.E. to delete “Temporary Internet files”
and all offline contents.
Remote Access -> Operations
 Please note that the PC user must have system administrator password
for the PC; otherwise, the process will fail, and an error dialog will be
shown.
 Add More DVRs : Click on
the DVR list.
to call up Setup dialog. Add more DVRs in
 Select DVR : Click on
.
 Context Menu : Right-click in the video window to call up Context Menu.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising