Tripp Lite 1111 West 35th Street Chicago, IL 60609 USA Telephone: +(773) 869 1234 E-mail: email@example.com Model #: SMART2600RM2U SmartPro 2.6kVA 2100W Line Interactive Sine Wave UPS, Extended-run & SNMPWEBCARD options, 2U Rack/Tower, USB, RS232, EPO, 120V Highlights 2.6kVA / 2600VA / 2100W line interactive 2U rack/tower UPS, Sine Wave output 120V output, Corrects brownouts and overvoltages from 83V to 145V 0.8 Power Factor, Front panel status LEDs Extended runtime options up to 1600W 4 post compatible mounting accessories 96% line-mode efficiency, 3 switched load banks USB, RS232, EPO and slot for SNMPWEBCARD option 120V NEMA 5-20P input, 4 NEMA 5-15R, 4 NEMA 5-15/20R & 1 L5-20R outlets Description 2600VA line interactive UPS system for server, network and telecommunications equipment. 2U rackmount or tower form factor with an installed depth of only 19 inches. High 96% line-power efficiency rating reduces energy consumption and BTU heat output. Expandable battery runtime with optional BP48V24-2U and BP48V60RT-3U external battery packs. Uninterruptible Power Supply (UPS) switches to battery-derived AC output during power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during overvoltages to maintain regulated 120v output over an input range of 83-145V. Includes 5-20P input plug and 5-15R, 5-15/20R and L5-20R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support communications via USB, DB9 serial and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated 3-bank PDU switching supports load shedding and remote-reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. Package Includes SMART2600RM2U UPS System, PowerAlert Software and cabling, 4-post rackmount installation hardware, Instruction manual Features SmartPro line interactive UPS system is ideal for voice, data, medical and industrial networking applications High 96% line-power efficiency rating reduces energy consumption and BTU heat output Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during overvoltages Maintains continuous operation through blackouts, voltage fluctuations and surges Corrects line voltage conditions as low as 83V and as high as 145 back to 120V nominal values Standard internal battery set offers 12 minutes at full load and 4 minutes at full load Optional BP48V24-2U and BP48V60RT3U external rack/tower battery packs enable extended runtime operation Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual) Compact form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches Ships with all mounting accessories for 4 post rackmount installation Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation Optional 2-9USTAND accessory enables small-footprint upright tower placement Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, with Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, with the built-in ability to shutdown any number of additional servers over IP UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot Built-in Emergency Power Off (EPO) interface with cable Factory installed NEMA 5-20P input plug; user configurable L5-20P or L5-30P input plug-in connections supported NEMA 5-15R, NEMA 5-15/20R and L5-20R output receptacles Integrated 3 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (1 outlet per load bank) Front panel LEDs offer current monitoring and battery charge level information UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required Specifications OUTPUT Output Volt Amp Capacity (VA) 2600 Output kVA capacity (kVA) 2.6 Output Watt Capacity (watts) 2100 Output kW capacity 2.1 Output power factor 0.8 Nominal Output Voltage(s) Supported 120V Frequency compatibility 60 Hz Output voltage regulation (line mode) -18%, +8% Output voltage regulation (Battery mode) +/- 5% Built-in UPS output receptacles 4 5-15R outlet(s); 4 5-15/20R outlet(s); 1 L5-20R outlet(s) Built-in controllable switched load banks Three switchable single-outlet 5-15R load banks Output circuit breaker 15A breaker protects 5-15R, 20A breaker protects 5-15/20R, L5-20R is unbreakered Output AC waveform (AC mode) Sine wave Output AC waveform (battery mode) Pure Sine wave INPUT Rated input current (at maximum load) 24A (with user-supplied L5-30P plug), 16A (with factory 5-20P plug) Nominal Input Voltage(s) Supported 120V AC UPS input connection type 5-20P Input circuit breaker 30A UPS Input cord length (ft.) 10 UPS Input cord length (m) 3 Recommended Electrical Service 20A 120V BATTERY Full load runtime (minutes) 4 min. (2100w) Half load runtime (minutes) 11 min. (1050w) Expandable battery runtime Extended runtime supported via optional external battery packs External battery pack compatibility BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible) DC system voltage (VDC) 48 Battery recharge rate (included batteries) Less than 4.5 hours from 10% to 90% Replacement battery cartridge (internal UPS battery replacement) RBC94-2U Battery Access Front panel battery access door Battery replacement description Hot-swappable, user replaceable batteries VOLTAGE REGULATION Voltage regulation description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 Overvoltage correction Input voltages between 127 and 147 are reduced by 12% Undervoltage correction Input voltages between 95 and 104 are boosted by 12% Severe undervoltage correction Input voltages between 83 and 94 are boosted by 24% LEDS ALARMS & SWITCHES LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status Alarms Audible alarm indicates power-failure, overload and low-battery conditions Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status Switches 2 Switches control off/on power status and alarm-cancel/self-test operation SURGE / NOISE SUPPRESSION UPS AC suppression joule rating 480 UPS AC suppression response time Instantaneous EMI / RFI AC noise suppression Yes PHYSICAL Installation form factors supported with included accessories 4 post 19 inch rackmount (mounting rail kit included) Installation form factors supported with optional accessories 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND) Primary form factor Rackmount UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 3.5 x 17.5 x 19 UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 8.9 x 44.4 x 48.3 Rack Height 2U Secondary form factor Tower (requires 2-9USTAND) UPS / Power Module weight (lbs) 64 UPS / Power Module weight (kg) 29.1 UPS Shipping dimensions (height x width x depth / inches) 9 x 23.5 x 20 UPS Shipping dimensions (height x width x depth / cm) 22.9 x 59.7 x 50.8 Shipping weight (lbs) 72 Shipping weight (kg) 32.7 Cooling method Fan UPS housing material Steel ENVIRONMENTAL Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity 0 to 95%, non-condensing AC mode BTU / hr. (full load) 297.5 Battery mode BTU / hr. (full load) 1360 COMMUNICATIONS Communications interface USB (HID enabled); DB9 Serial; Contact closure Network monitoring port description Supports detailed monitoring of UPS and site power conditions; 1 USB port and 1 DB9 serial contact closure port PowerAlert software Included Communications cable USB and DB9 cabling included WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER Transfer time 5 milliseconds Low voltage transfer to battery power (setpoint) 83 High voltage transfer to battery power (setpoint) 145 SPECIAL FEATURES Grounding lug Back panel grounding lug Cold Start (startup in battery mode during a power failure) Cold-start operation supported High availability UPS features Hot swappable batteries Green & high efficiency features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks CERTIFICATIONS UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI) WARRANTY Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note: registration is required for 3-year warranty. Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance Related Items Optional Products Related Model Description Qty. BP48V24-2U BP48V242U - External Battery Pack for UPS System 1 BP48V60RT-3U External Battery Pack and Cable. 3U, Expandable, Blue 2-Point Connector 1 DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial lines 1 DNET1 Network Surge Suppressor - Essential protection for data and communication lines 1 DTEL2 Network Surge Suppressor - Essential protection for data and communication lines 1 ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or switched PDU.) 1 PDU1220 Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical networking equipment 1 PS7224-20 Tripp Lite Power Strip - Multiple outlets wherever you need them 1 SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. 1 U022-010 10-ft. USB2.0 A/B Gold Device Cable (A Male to B Male) 1 WEXT5-2200-3000 5-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack models, 2200-3000VA or less 1 2-9USTAND Enables Tower Placement of Rackmount UPS Systems 1 2POSTRMKITWM Enables 2-Post Rackmount or Wallmount Installation of Select Rackmount UPS Systems 1 MODBUSCARD For remote monitoring and control via MODBUS protocol 1 More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=3024. Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project