Instructions for use WAT 8575 Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch Verkauf Kundendienst Ersatzteile Telefon 0848 801 002 Telefon 0848 801 001 Telefon 0848 801 005 Fax 0848 801 017 Fax 0848 801 003 Fax 0848 801 004 firstname.lastname@example.org email@example.com firstname.lastname@example.org 20 - 60°C 20 - 60°C 20 - 60°C 20 - 30°C 20 - 40°C 20 - 40°C 20 - 40°C – – – – Buntwäsche Couleurs Pflegeleicht Synthétiques Mischwäsche Sport 40° Kurzwäsche Rapide Feinwäsche Délicat Wolle Laine Handwäsche Lavage main Spülen & Schleudern Rinçage & Essorage Schleudern Essorage Schonschleudern Essorage court Abpumpen Vidange Cotton Synthetics Daily load Quick wash Delicates Wool Handwash Rinse & Spin Spin Gentle Spin Drain – – – – Care Labels – 1.0 5.5 5.5 1.0 1.0 1.5 3.0 3.0 2.5 5.5 5.5 kg Max. Load G I B J M Type of wash / Notes D E F L K B N O PROGRAMME CHART A – – – In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. – – – – Yes Yes Yes 3) Yes Yes Yes 3) Yes 3) – – – i i i i i i i i Special options Easy Rinse Intensive Eco ironing Hold rinse Start delay – – – – – – i – – i i – – – – – – – – i i i – – – i i i i i i i i – – – i – – – i i i i – i i i i 2) i 2) i 2) i 2) i 2) i 2) i 2) – i i i i i i i i i i – 1000 1) 1200 1200 400 1) 1000 1) 1000 1) 1200 1200 1000 1) 1200 5019 412 10101 Bauknecht is a registered trademark. – – – – – – – – – i i Spin Variable Max spin spin Schleudern speed Essorage rpm K. “Door open” indication L. “Button locked” indication Your washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.: M. “Water tap closed” indication N. “Clean pump” indication O. “Service” indication J. Programme sequence indicator Vorwäsche Bügelleicht Spülstopp Intensivspülen Öko Startvorwahl Départ Prélavage Repassage Arrêt cuve Rinçage Eco différé facile pleine intensif The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash”provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0703 – – – Same as the last rinse and the final spin in the “Cotton” programme. Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. This programme (40ºC) is tested and approved by The Woolmark Company for machine washable wool. Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40ºC) is tested and approved by The Woolmark Company for handwashable wool. i – Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. i i – Curtains and delicate clothing, dresses, skirts, shirts and blouses. C H Detergents and additives PreMain Softener Prewash Wash wash Slightly to normally soiled textiles made of cotton and/or synthetics. Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton. Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. - for temperature selection, respect the manufacturer's recommendations on the care label i: optional / Yes : dosing required 1) For improved garment care, spin speed is restricted in these programmes. 2) Do not use liquid detergent when activating the “Start delay”. 3) Do not use liquid detergent for main wash if you have activated “Prewash” option. 70 - 95°C Temperature Kochwäsche Coton blanc Programme Programme selector Option buttons “Favourite” button “Temperature” button “Start delay” button “Variable spin” button “Start/Pause” button “Reset” button Display WAT 8575 White Cotton A. B. C. D. E. F. G. H. I. GB Temperature (°C) 95 60 40 60 40 40 30 40 40 40 30 Load (kg) 5.5 5.5 5.5 2.5 2.5 3.0 3.0 1.5 1.0 1.0 1.0 Water (l) 55** 49 53 53** 47 43 36 51 53 43 42 Energy (kWh) 1.70 1.02 0.55 0.85 0.50 0.48 0.30 0.50 0.50 0.50 0.30 Approx. Programme Duration* (hours : minutes) 1:55 2:25 2:00 1:30 1:15 1:00 0:30 0:45 0:45 0:35 0:31 SELECT ANY DESIRED OPTION When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. “Prewash” button • Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min. • Do not use liquid detergent for the main wash when activating the Prewash option. “Easy ironing” button • Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier. • Increases the water quantity and the clothes are spun very gently. Rinse Hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. Add detergent as indicated an the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. 1. Turn the programme selector to the desired programme. 2. The temperature and spin speed indicated on the display can be altered by pressing the “Temperature” button or the “Variable spin” button. The light next to the “Start/Pause” button flashes. ADD DETERGENTS, CLOSE THE LID AND SELECT THE PROGRAMME • This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”. • It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only. • If you select “Rinse Hold”, do not leave items to soak for too long. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” symbol on the display lights up. The blue light under the “Start/Pause” button flashes. Terminate the “Rinse Hold” option: • Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme. • If you do not wish to spin the clothes, turn the programme selector to “Drain” and press the “Start/Pause” button to start the Drain programme. “Intensive Rinse” button • More water is added and rinse cycle is prolonged. • This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. “Eco” button • With a modified temperature profile and a slightly prologned washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved. “Variable spin” button • Every programme has a predefined spin speed. • Press the button to set another spin speed. • If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during the rinse. The water is drained out only. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label. White Cotton Cotton*** Cotton Synthetics Synthetics Daily load Quick wash Delicate Wool Handwash Handwash Programme CONSUMPTION DATA “DOOR OPEN” INDICATION Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a PROGRAMME START Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. START DELAY The “Start delay” allows to run the machine at the consumer's convenience, for example at night when electricity is cheaper. • Select programme, temperature, spin speed and options. • Press the “Start Delay” button to select the delay time up to 23 hours. • Press the “Start/Pause” button. The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes flash. • The time delay indication disappears when the programme starts and it is replaced by the remaining programme time. • Once having pressed the “Start/Pause” button, the number of hours preselected can be reduced by pressing and holding the “Start delay” button. From 1 hour on, the delay time can also be reduced by minutes. To cancel the “Start delay” ..before you press the “Start/Pause” button: • Select another programme or press the “Drain/ Reset” button. ..after having pressed the “Start/Pause” button: • Press the “Reset” button for at least 3 second - the start delay time dissapears from the display. SAVE YOUR FAVOURITE PROGRAMMES If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button. • Select the desired programme, temperature, spin speed and option(s), push and hold the “Favourites” button for at least 3 seconds. The lamp next to “Favourites” shortly flashes and then lights up - the programme settings is saved. Next time you want to use your individual programme settings, select the programme, push the “Favourites” button and start by pushing “Sart/Pause”. If you want to replace the saved programme setting by another one: • Push the programme button, select temperature, spin speed and options as desired and then press and hold the “Favourites” button for at least 3 seconds. The previously saved programme setting will be replaced by the new one. 5019 412 10101 Bauknecht is a registered trademark. The “Reset” button cancels a programme before the end. • Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the lid can be opened. CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END 1. Press the “Start/Pause” button to pause the programme. The light flashes. 2. Select the new programme, temperature, any options and another spin speed if you want. 3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START PROGRAMME END • The symbols of the programme sequence indicator are dark, and the “Door open” indication lights up. 1. Turn the programme selector to the “On/Off” position. 2. Close the water tap. 3. Open lid and drum and unload the machine. 4. Leave the lid open for some time to allow the interior of the machine to dry. RED INDICATIONS ON THE DISPLAY “Water tap closed” The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use. “Clean pump” Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”). “Service” Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service. LOCK BUTTON You can lock the buttons of the control panel against improper use (e.g. by children). • Press the temperature and spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up. • To unlock the buttons again: proceed in the same way. wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project