passion - goldoni
G e n e r al
catalogue
Two-wheeled
t r a c t o r s
Two-wheeled tractors,
safety and experience
technology
passion
GOLDONI S.p.A.
summary
4
page
Two-wheeled
tractors
TWIST 6
TWIST 9
8
page
TWIST 9S
TWIST 12S
6
page
TWIST 7S
12
page
JOKER 8DS
JOKER 10DS
JOKER 12S
14 16
page
page
JOKER 12S
MY SPECIAL 14
MY SPECIAL 15
Table of implements and accessories
page 18
TWIST
6 - 9
4
TWIST 6 Engine with 4,8 ch, gasoline
TWIST 9 Engine with 7,1 ch, gasoline
Twist Series,
50 years of experience at your service.
Twist is the two-wheeled tractor created by Goldoni to revolutionize the quality of your work, even during your leisure time!
Twist is the result of 50 years of experience. Its qualities are the ones
that have made Goldoni’s professional machines famous: simplicity,
manoeuvrability, safety and exceptional sturdiness.
Its potential is infinite. Just turn the handlebars through 180° and you
can use all the front-mounted implements, such as: the lawn mower,
mower, snow plough, scraper, etc.
Series TWIST
Key
TWIST 6
TWIST 9
Lt.
Honda GX160 Gasoline
3,6 (4,8)
1 to 3600 rpm/min
163
pull start
3,6
Honda GX240 Gasoline
5,3 (7,1)
1 to 3600 rpm/min
242
pull start
6
Kph
2 FWD + 2 REV
dry cone clutch with manual control
no
operated with lever
FWD: 1,52; 3,06 - REV: 1,67; 3,35
2 FWD + 2 REV
dry cone clutch with manual MOWING
control
no
operated with lever
FWD: 1,52; 3,06 - REV: 1,67; 3,35
the speeds are given in kph
Engine
forward speeds
Type
Power rating
N° cylinders / nominal rate
Swept volume
Start
Tank capacity
reverse speeds
speed gear number
Kw/Ch
cc.
5,2
3,5
yes
yes
0,9
1,3
3rd speed block when REV gear is engaged
1,4
5,0
2,8
6
1,4
1,7
1,5
2,8
3,1
3,3
5,9
N° speeds
Main clutch
Differential lock
Wheels clutch release
Speed
8
Transmission
PTO
I
II
I
II
Type
III
I
II
III
I
IV
II
III 1 speed independent from the tractor’s
I ground
II speed
III
with
IV
Driver's Area
assembled on elastic shock-absorbers, height adjustable in 9 positions. Single steering column
in 5 positions adjustable and rotatable at 180°
yes
fast
MILLING
1797
432-522 (wheels 4.0x8”)
Kg
90
110
2
5
mm
1717
432-522 (wheels 4.0x8”)
Hubs with adjustable cylindric wheel holder
8 mm8 mm
4.00x8"
4.00x8" garden
yes
I
4.00x8"
4.00x8" garden
II
III
yes
1,4
Tyres available
1,3
Tyres
0,9
mm
7,2
6,5
7
Weights and Dimensions
Max length
Min and max width
Wheight with std wheels and cultivator
included
2
1,3
4,0
2,8
3,6
3,3
2,0
GEAR STOP safety device
Coupling system for attachments
1,8
1,7
Handlebars
IV
The height of the handlebars can be
set in as many as 9 positions.This means that
the two-wheeled tractor can be used by all the family for any
type of work. Moreover, since the handlebars can be regulated in 5 different positions at the sides, the operator is prevented from walking over the ground
he has already worked. Turning the handlebars 180° is a simple process and enables the
machine to be fitted with front-mounted implements, such as: lawn mower, cultivator,
snow plough, scraper, etc…
“GEARSTOP” does not turn
the engine off but it locks the
transmission and the PTO, in
case of release of the handlebar grip.
Device that prevents the reverse gear
from being engaged when the PTO is
used for cultivating work.
The quick coupling allows
the operator to quickly
and easily change the implements.
The external width
of the wheels and the
track width are adjustable.The adjustments
adapt the machine to
specialized crops.
Accurate protection of the
moving mechanical parts
and hot parts.
TWIST
7s
6
s
SLIDING TRACKWIDTH
TWIST 7S Engine 5,5 Ch, gasoline
Twist Series,
50 years of experience at your service.
Twist is the two-wheeled tractor created by Goldoni to revolutionize the quality of your work, even during your leisure time!
Twist is the result of 50 years of experience.
Its qualities are the ones that have made Goldoni’s professional
machines famous: simplicity, manoeuvrability, safety and exceptional
sturdiness.
Its potential is infinite. Just turn the handlebars through 180° and you
can use all the front-mounted implements, such as: the lawn mower,
mower, snow plough, scraper, etc.
Series TWIST
Key
Twist 7S
the speeds are given in kph
Engine
forward speeds
Type
Power rating
N° cylinders / nominal rate
Swept volume
Start
Tank capacity
reverse speeds
speed gear number
Honda GX200 Gasoline
4,1 (5,5)
1 to 3600 rpm/min
196
pull start
MOWING
3,6
Kw/Ch
cc.
Lt.
Transmission
5,18
3 AV + 3 RM with reverse shuttle
dry cone clutch with manual control
operated with lever
no
FWD: 1,4; 2,8; 5,0 - REV: 2,0; 4,0; 7,2
yes
Type
III
IV
I
II
III
IV
assembled on elastic shock-absorbers, height adjustable in 9 positions. Single steering column
in 5 positions adjustable and rotatable at 180°
yes
fast
1,33
2
1,3
GEAR STOP safety device
Coupling system for attachments
2,05
II
Handlebars
2,0
1,44
with 1 speed independent from the tractor’s ground speed
I
Driver's Area
III
MILLING520-786
1717
(wheels 5.0x10") - splined disc
110
7,37
mm
mm
Kg
5,05
5
7,2
7
Max length
Min and max
width
MILLING
Wheight with std wheels and cultivator included
Tyres
5.0x10"
yes
2,05
2
Tyres available
Adjustable splined hubs and rims
II
III
1,4
0,9
I
1,33
1,3
8 mm8 mm
IV
I
II
III
IV
3,56
4,0
Weights and Dimensions
1,44
II
0,94
I
3,56
0,9
PTO
Kph
0,94
1,4
1,4
2,8
3,5
5,0
5,2
MOWING
N° speeds
Main clutch
Differential lock
Wheels clutch release
Speed with wheels 5.00x10
3rd speed block when REV gear is engaged
The height of the handlebars can be
set in as many as 9 positions.This means that the
two-wheeled tractor can be used by all the family for any type of
work. Moreover, since the handlebars can be regulated in 5 different positions
at the sides, the operator is prevented from walking over the ground he has already
worked. Turning the handlebars 180° is a simple process and enables the machine to be fitted
with front-mounted implements, such as: lawn mower, cultivator, snow plough, scraper, etc…
Device that prevents the reverse
gear from being engaged when the
PTO is used for cultivating work.
“GEARSTOP” does not turn
the engine off but it locks the
transmission and the PTO, in
case of release of the handlebar grip.
The quick coupling allows
the operator to quickly
and easily change the implements.
Accurate protection of the
moving mechanical parts
and hot parts.
The external width of the
wheels and the track width
are adjustable.The adjustments
adapt the machine to specialized crops.
TWIST
9s - 12s
8
TWIST 9S Engine with 7,1 hp, gasoline
TWIST 12S Engine with 9,5 hp, gasoline
Twist Series,
50 years of experience at your service.
Twist is the two-wheeled tractor created by Goldoni to revolutionize the quality of your work, even during your leisure time!
Twist is the result of 50 years of experience.
Its qualities are the ones that have made Goldoni’s professional
machines famous: simplicity, manoeuvrability, safety and exceptional
sturdiness..
Its potential is infinite. Just turn the handlebars through 180° and you
can use all the front-mounted implements, such as: the lawn mower,
mower, snow plough, scraper, etc.
Series TWIST
Key
TWIST 9S
TWIST 12S
Honda GX240 Gasoline
5,3 (7,1)
1 to 3600 rpm/min
242
pull start
6
Honda GX340 Gasoline
7,1 (9,5)
1 to 3600 rpm/min
337
pull start; electric starting optional
6,5
3 FWD + 3 REV with reverse shuttle
dry cone clutch with manual control
operated with lever
no
FWD: 1,7; 3,3; 5,9 - REV: 1,8; 3,6; 6,5
yes
3 FWD + 3 REV with reverse shuttle
dry-disk clutch with manual control
operated with lever
no MOWING
FWD: 1,7; 3,3; 5,9 - REV: 1,8; 3,6; 6,5
yes
with 1 speed independent from the tractor’s
ground speed
with 1 speed independent from the tractor’s
ground speed
assembled on elastic shock-absorbers, height
III
adjustable
in 9 positions. Single steering column
in 5 positions adjustable and rotatable at 180°
assembled on elastic shock-absorbers, height
I
II 9 positions.
III Single
IV steering column
adjustable
in
in 5 positions adjustable and rotatable at 180°
yes
fast
yes
fast
the speeds are given in kph
Engine
forward speeds
Type
Power rating
N° cylinders / nominal rate
Swept volume
Start
Tank capacity
reverse speeds
speed gear number
Kw/Ch
cc.
Lt.
6
1,4
1,4
1,3
IV
I
II
Tyres
Tyres available
mm
mm
Kg
4,0
2,0
Max length
Min and max width
Wheight with std wheels and cultivator included
1797
460-642 (wheels 4.0x10")
110
1797
460-642 (wheels 4.0x10")
116
MILLING
7,2
6,5
3,6
1,8
2,8
Weights and Dimensions
2
GEAR STOP safety device
Coupling system for attachments
7
II
III
Handlebars
5
I
4.00x10"
4.00x8" garden
5.0x10"
4.00x8" garden
8 mm8 mm
2
III
1,3
II
1,3
I
0,9
Driver's Area
I
II
III
1,4
1,7
Type
2,8
2,8
PTO
3,5
5,0
Kph
0,9
5,9
8
N° speeds
Main clutch
Differential lock
Wheels clutch release
Speed with wheels 5.00x10
3rd speed block when REV gear is engaged
5,2
Transmission
3,3
3,1
3,3
s
IV
The height of the handlebars can be
set in as many as 9 positions.This means that the
two-wheeled tractor can be used by all the family for any type of
work. Moreover, since the handlebars can be regulated in 3 different positions
at the sides, the operator is prevented from walking over the ground he has already
worked. Turning the handlebars 180° is a simple process and enables the machine to be fitted
with front-mounted implements, such as: lawn mower, cultivator, snow plough, scraper, etc…
“GEARSTOP” does not turn
the engine off but it locks the
transmission and the PTO, in
case of release of the handlebar grip.
Device that prevents the reverse gear
from being engaged when the PTO is
used for cultivating work.
The quick coupling allows
the operator to quickly
and easily change the implements.
The external width of the wheels and the
track width are adjustable.The adjustments
adapt the machine to specialized crops.
Accurate protection of the
moving mechanical parts
and hot parts.
assured by experience
G e n e r al
catalogue
Two-wheeled
t r a c t o r s
JOKER
8ds - 10ds
12s
12
JOKER 8DS engine with 6,8 hp, diesel
JOKER 10DS engine with 10 hp, diesel
JOKER 12S engine with 9,5 hp, gasoline
JOKER Series,
technology at your service.
In order to be productive, agriculture needs specialized machines that work quickly and safely.
Joker, the two-wheeled tractor specifically designed for specialized crops, provides undoubted
guarantees for this type of work. Experience acquired during more than 80 years of manufacturing
agricultural machines for specialized crops has allowed us to create a truly exceptional machine
for nurseries, greenhouses and horticulture. Precision at work combined with the utmost in manoeuvrability make this two-wheeled tractor an essential machine for all market-gardeners and
nurserymen in their daily work.The Joker two-wheeled tractor is extremely versatile, as testified
by the numerous ways in which it can be used with the most different sorts of implement for every
type of job.Thanks to its versatility and technical specifications, Joker allows you to quickly change
the implements and cut grass, or sweep lawns and nurseries with use of a single driving unit.
Series JOKER
JOKER 8DS
JOKER 10DS
JOKER 12S
Diesel Lombardini 15LD315
5,6/6,8
1 / 3600 rpm
315
Diesel Lombardini 15LD400
7,3/10
1 / 3600 rpm
401
Gasoline Honda GX340
7,1 (9,5)
1 / 3600 rpm
337
pull start; electrical starting optional
pull start; electrical starting optional
pull start
4,3
without clutch housing spacer
5
without clutch housing spacer
6,5
without clutch housing spacer
4 FWD + 3 REV each way
dry-disk clutch with manual control
operated with lever
yes
4 FWD + 3 REV each way
dry-disk clutch with manual control
operated with lever
yes
4 FWD + 3 REV each way
dry-disk clutch with manual control
operated with lever
yes
Tilling FWD direction: 1,12; 1,72; 4,24; 6,18
Tilling REV direction: 0,79; 1,21; 2,99
Grass-cutting FWD: 0,79; 1,21; 2,99; 4,35
Grass-cutting REV: 1,12; 1,72
Tilling FWD direction: 1,12; 1,72; 4,24; 6,18
Tilling REV direction: 0,79; 1,21; 2,99
Grass-cutting FWD: 0,79; 1,21; 2,99; 4,35
Grass-cutting REV: 1,12; 1,72
Tilling FWD direction: 1,12; 1,72; 4,24; 6,18
Tilling REV direction: 0,79; 1,21; 2,99
Grass-cutting FWD: 0,79; 1,21; 2,99; 4,35
Grass-cutting REV: 1,12; 1,72
yes
yes
yes
with 1 speed independent from the
tractor’s ground speed
with 1 speed independent from the
tractor’s ground speed
with 1 speed independent from the
tractor’s ground speed
yes
yes
yes
assembled on elastic shockabsorbers, height adjustable in 9
positions. Single steering column in
5 positions adjustable and rotatable
at 180°
yes
yes
fixed
assembled on elastic shockabsorbers, height adjustable in 9
positions. Single steering column in
5 positions adjustable and rotatable
at 180°
yes
yes
fixed
assembled on elastic shockabsorbers, height adjustable in 9
positions. Single steering column in
5 positions adjustable and rotatable
at 180°
yes
yes
fixed
mm
mm
555-668
1768
555-668
1768
555-668
1822
Kg
132
153
116
5.00x10”
5.00x10”
5.00x10”
yes
yes
yes
Engine
Key
the speeds are given in kph
forward speeds
Type
Power rating
N° cylinders / nominal rate
Swept volume
Kw/Hp
cc.
Start
Tank capacity
Notes
Lt.
Transmission
speed gear number
Speed with wheels 5.00x10
Kph
0,94
1,44
3,56
5,18
MOWING
N° speeds
Main clutch
Reverser
Differential lock
PTO
II
III
Type
IV
Reverse gear block when PTO is
engaged (safety device)
2,05
1,33
I
Reverse gear block (safety device)
7,37
Driver's Area
MILLING
5,05
Handlebars
2,05
III
1,44
IV
3,56
1,33
II
0,94
I
Tow hook
GEAR STOP safety device
Coupling system for attachments
Weights and Dimensions
Min and max width
Max length
Wheight with std wheels and
cultivator included
Tyres
Available tyres
Adjustable hubs and rims with star
flange
“GEARSTOP” does
not turn the engine off but it
locks the transmission and the PTO, in case of
release of the handlebar grip.
The lever that locks and releases
the handlebars so they can be turned, is controlled from the operator’s position and is easy to use.
The handlebars can be adjusted at
9 height positions and intervals of
18°, all conveniently selected from
the operator’s position.
The handlebar column is connected to the casing with silent-blocks.
By absorbing the vibrations, this
device allows you to use the twowheeled tractor for long periods
of time without tiring.
Fixed hitch flange
A full bonnet covers the engine
to protect the mechanical parts
and to safeguard the operator
from accidents.
JOKER
12s
Sliding
track-width
14
JOKER 12S engine with 9,5 hp, gasoline
JOKER Series,
technology at your service.
In order to be productive, agriculture needs specialized machines that work quickly and
safely. Joker, the two-wheeled tractor specifically designed for specialized crops, provides
undoubted guarantees for this type of work. Experience acquired during more than 80
years of manufacturing agricultural machines for specialized crops has allowed us to create
a truly exceptional machine for nurseries, greenhouses and horticulture. Precision at work
combined with the utmost in manoeuvrability make this two-wheeled tractor an essential
machine for all market-gardeners and nurserymen in their daily work.The Joker two-wheeled tractor is extremely versatile, as testified by the numerous ways in which it can be used
with the most different sorts of implement for every type of job.Thanks to its versatility and
technical specifications, Joker allows you to quickly change the implements and cut grass, or
sweep lawns and nurseries with use of a single driving unit.
Key
Series JOKER
the speeds are given in kph
JOKER 12S
Engine
forward speeds
Type
Power rating
N° cylinders / nominal rate
Swept volume
Start
Tank capacity
Notes
reverse speeds
speed gear number
Kw/Hp
cc.
Lt.
Gasoline Honda GX340
7,1 (9,5)
1 / 3600 rpm
337
pull start
6,5
with clutch housing spacer
Transmission
5,18
MOWING
3,56
Speed with wheels 5.00x10
III
Type
IV
with 1 speed independent from the tractor's ground speed
2,05
yes
7,37
Driver's Area
assembled on elastic shock-absorbers, height adjustable in 9 positions. Single steering
column in 5 positions adjustable and rotatable at 180°
Handlebars
5,05
Tow hook
GEAR STOP safety device
Coupling system for attachments
yes
yes
fixed
Weights and Dimensions
2,05
III
IV
Min and max width
Max length
Wheight with std wheels and cultivator included
mm
mm
Kg
555-668
1822
116
1,44
Tyres
3,56
1,33
Tilling FWD direction: 1,33; 2,05; 5,05; 7,37 - Tilling REV direction: 0,94; 1,44; 3,56
Grass-cutting FWD: 0,94; 1,44; 3,56; 5,18 - Grass-cutting REV: 1,33; 2,05
yes
Reverse gear block when PTO is engaged (safety device)
II
0,94
Kph
PTO
MILLING
I
4 FWD + 2 REV each way
dry-disk clutch with manual control
operated with lever
yes
Reverse gear block (safety device)
1,44
0,94
II
1,33
I
N° speeds
Main clutch
Reverser
Differential lock
Available tyres
Adjustable hubs and rims with star flange
6.5/80x12"
yes
“GEARSTOP” does
not turn the engine off but it
locks the transmission and the PTO, in case of
release of the handlebar grip.
The lever that locks and releases
the handlebars so they can be turned, is controlled from the operator’s position and is easy to use.
The handlebars can be adjusted at
9 height positions and intervals of
18°, all conveniently selected from
the operator’s position.
The handlebar column is connected to the casing xith silent-blocks.
By absorbing the vibrations, this
device allows you to use two
wheeled tractor for long periods
of time without tiring.
Fixed hitch flange
A full bonnet covers the engine
to protect the mechanical parts
and to safeguard the operator
from accidents.
MY SPECIAL
14 - 15
16
MY SPECIAL 14 engine with 12,2 hp, diesel
MY SPECIAL 15 engine with 13,6 hp, diesel
My Special Series,
versatile and easy to manoeuvre.
With 12 to 14 hp diesel and gasoline engines, the My Special series
two-wheeled tractors are extremely versatile and simple to manoeuvre when equipped with various tools.They are easily able to deal
with all the cutting, ploughing, planting, mowing and pest control treatments required in greenhouses, nurseries and market gardens. If
these are the versatility features of My Special, we’ve certainly not
neglected the technical aspect or safety, thus the operator can work
with the utmost confidence. 6-speed gearbox with 4 forward and
2 reverse speeds. Two power take-offs, two cutting speeds for each
speed gear, lower power take-off synchronized with all the ground
speeds of the machine, reverse speed inclusive.
Key
Series MY SPECIAL
the speeds are given in kph
Type
Power rating
N° cylinders / nominal rate
Swept volume
Start
Tank capacity
reverse speeds
speed gear number
cc.
Lt.
Diesel Lombardini 25LD330/2 B1
10 (13,6)
2 / 3000 rpm
654
pull start; electrical starting optional
4
3,5
Min and max width
Wheight with std wheels and cultivator included
1,3
Kg
5,05
7,37
567 - 761
255
mm
Tyres
II
III
1,4
Adjustable rims for track regulation
Wheel axle with track width adjuster
I
0,9
Available tyres
2,05
567 - 761
255
2
Weights and Dimensions
IV
6.5/80 - 12”
6.5/80 - 15”
yes
-
2,05
5
7,2
MILLING
1,33
fixed, sheet made, height adjustable in
9 positions.
sheet
yes
MILLING
yes
fixed
7
4,0
Capot
Tow hook
GEAR STOP safety device
Coupling system for attachments
fixed, sheet made, height adjustable in
9 positions.
sheet
yes
yes
fixed
I
II
1,44
2,8
2,0
2
Handlebars
1,33
1,3
Driver's Area
IV 2 speeds independent from the tractor’s
I
II
III
IV rpm - 900 rpm)
with
ground
speed
(540
yes
0,94
I
II
III
I
II
III
Type
Reverse gear block when PTO is engaged (safety device)
6,5
5,18
0,94
band type
0,9
PTO
1,44
1,4
1,4
1,3
Type of brakes
IV
4 FWD + 1 REV
dry-disk
MOWING
yes
FWD: 1,37 / 2,77 / 6,0 / 8,0
REV: 2,81
yes
3,56
5,0
Kph
2,8
2,8
Brakes
4 FWD + 1 REV
dry-disk
yes
MOWING
FWD: 1,37 / 2,77 / 6,0 / 8,0
REV: 2,81
yes
5,2
8
N° speeds
Main clutch
Differential lock
Wheels clutch release
Reverse gear block (safety device)
6.5/80
- IV
12”
III
6.5/80 - 15”
yes
-
8 mm8 mm
3,56
III
Diesel Lombardini 3LD510
9 (12,2)
1 / 3000 rpm
510
pull start; electrical starting optional
5,2
Transmission
6
5,9
Kw/Ch
Speed
II
MY SPECIAL 15
Engine
forward speeds
I
MY SPECIAL 14
“GEARSTOP” does not turn
the engine off but it locks the transmission and the PTO, in case of release of the handlebar grip.
A full bonnet covers the
engine to protect the mechanical parts and to safeguard the operator from
accidents.
Fixed hitch flange
The external width of the wheels and the track width are adjustable,
enabling the My Special to be adapted for work on specialized crops.
Table of implements and accessories
18
cultivator 19 &
cultivator 19S
Linkage 85
mowing bar
with special teeth
one-speed
ballast
TWIST 6
TWIST 9
TWIST 7S
TWIST 9S
TWIST 12S
JOKER 8 DS
JOKER 10 DS
JOKER12 S
JOKER12S
MY SPECIAL 14
MY SPECIAL 15
Linkage 70
cultivator 21M
& cultivator 21
cultivator 22
& cultivator 22M
G e n e r al
catalogue
Two-wheeled
t r a c t o r s
transfer
wheel
implement
carrier
lawn mower TP 60
coulter
single-share
plough
turn-wrest
plough 90°
rear cutter for
cultivator 22
turn-wrest
plough180°
grubber
with 5 tines
coulter for
cultivator 19/21
front ballast
after - sales service
10101000 - 06430722 - V02
Servicing is provided by the Goldoni dealers and the authorized
workshops situated throughout the country. Ask your area dealer
for information about the after-sales services provided or if you need
assistance.The complete list is available in our web site www.goldoni.com
Goldoni S.p.A.
Via Canale, 3
41012 Migliarina di Carpi
Modena, Italy
tel. +39 0522 640 111
fax +39 0522 699 002
www.goldoni.com
Goldoni France
Route de Bourg-Saint-Andéol
26700 Pierrelatte, France
tél. +33 04 75 54 77 00
fax +33 04 75 54 81 40
goldonifrance@wanadoo.fr
www.goldoni.com
Authorized dealer
Goldoni suggests original
lubricants
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising