jcb backhoe loader | 2cx 12 ft

jcb backhoe loader | 2cx 12 ft
JCB BACKHOE LOADER | 2CX 12 FT
B
F
C
E
H
D
A
G
STATIC DIMENSIONS
JCB 2CX 12FT features four wheel drive, four wheel steering, four equal sized tires, a heavy duty one piece mainframe, componentized driveline and fully enclosed engine compartment.
Machine Model
2CX 12FT
ft-in (m)
Machine Model
2CX 12FT
ft-in (m)
A Transport Length
16-10 (5.13)
E Ground Clearance – King Post
B Transport Height
10-0 (3.05)
F Ground Clearance – Front Axle
1-1 (0.33)
C Height to Top of Cab/Canopy
8-8 (2.65)
G Width Over Tires
6-0 (1.84)
D Overall Width with Loader Bucket
6-6 (2.00)
H Wheelbase
6-6 (1.99)
1-7 (0.49)
JCB BACKHOE LOADER | 2CX 12 FT
ENGINE SUPPORT SYSTEM
OPERATING WEIGHTS
Operating weight includes machine equipped with standard loader bucket and standard rear attachments, full fluid levels
and SAE operator.
2CX
12FT
lb (kg)
12,329 (5592)
Add for:
Cab
Engine support system is designed for ease of daily checks, routine maintenance and longer service intervals.
Fuel Type
Diesel.
Fuel Filter
Replaceable cartridge plus water and sediment separator prefilter.
Air Cleaner
Dual, dry element cyclonic type.
Oil Filter and Lubrication
Full flow, spin-on type filter.
Cooling System
Hot climate specification, pressurized 14.5 psi (1.0 bar) suction fan.
Pressurized recovery tank with integral filler neck.
400 (181)
ELECTRICAL AND INSTRUMENTATION
ENGINE
Four cylinder, direct injection diesel. JCB Dieselmax water pump, spin-on oil and fuel filters, water sediment separator
prefilter, dual element air cleaner with internal precleaners. EPA Tier II emissions compliant.
Machine Model
2CX
Displacement
268 cu inches (4.4 liters)
Aspiration
Natural
Rated Engine RPM
2200
Horsepower Ratings
hp (kW)
SAE Gross
12 volt negative ground, utilizing wiring and connectors meeting IP67/IP69 water ingress test standard.
Central fuse panel located in operator area, 12 V negative ground system.
Gauges
Tachometer, engine coolant temp, fuel level, hourmeter.
Warning System
Audible and visual system. Engine oil, transmission, park brake, battery,
air cleaner, alternator.
Battery
12 V, 900 CCA. - 110 A/hr
Pre-wire
Radio speakers (cab).
Horn
Controlled from front (all) and rear. (Backhoe only)
Reverse Alarm
Standard fit.
Alternator
95 amps.
Rear Worklights
2 adjustable
75 (56)
SAE Net
69 (51.5)
Maximum Torque
lb-ft (Nm)
SAE Net
223 (302)
Max Torque RPM
1200
TRANSMISSION
The JCB Transmissions are designed and built specifically for JCB Backhoe Loaders. They feature synchronized shifting in
all gears, power shift between forward and reverse, and ground speeds to maximize production.
2CX
Manufacturer
STEERING
Type
Torque Converter
Power hydrostatic system utilizing the main hydraulic pump via a steering priority valve. In the event of engine failure,
emergency steering is maintained. Two steering modes. Front wheel steer or four wheel steer chosen by selector lever.
Machine Model
2CX
Steering Axles
Front/Rear
Type
Hydrostatic
Steering Turns – Lock to Lock
4.0
ft-in (m)
Turning Circle – 4WS – Curb to Curb
22-6 (6.85)
Loader Clearance – Circle 4WS
28-7 (8.71)
Torque Converter Ratio
Gears Forward/Reverse
12FT
JCB
Synchro shuttle
Single stage, dual phase, 11“ diameter
2.78:3
4F/4R
Gear Selection
Synchro Shift
Shuttle Control – F/R
Power Shuttle
Engine RPM
2200
Travel Speeds
mph (km/h) @
Rated Engine Speed
Tires Equipped
12.5/80x18
Gear 1
3.5 (5.6)
Gear 2
6.0 (9.6)
Gear 3
12.6 (20.3)
Gear 4
21.3 (34.3)
JCB BACKHOE LOADER | 2CX 12 FT
LOADER
FRONT AXLE
JCB front axles are designed and built specifically for backhoe loaders and incorporate double reduction, outboard
planetary drives and steel drive mechanism front and rear.
Machine Model
Type
2CX
JCB Max-Trac Steer Drive Torque Proportioning
Limited Slip
Optional
Axle Ratings
lb (kg)
Static Load Rating
16,500 (7484)
Dynamic Load Rating
8300 (3765)
SAE J43 Rating
Oscillation
JCB loaders provide parallel lift self leveling on the up and down cycle enhancing load retention and use of optional pallet
forks. High capacity buckets and high lift and breakout forces maximize production.
Machine Model
2CX
Loader Attachment Type
Quickhitch Tool Carrier
GP Bucket
lb (kg)
Bucket Breakout Force
7935 (3600)
Lift Capacity to Full Height
4850 (2200)
6-in-1 Bucket
10,487 (4757)
Bucket Breakout Force
7935 (3600)
9.5° Each Way
Lift Capacity to Full Height
4624 (2100)
Pallet Forks – Q-Fit
Operating Load
2873 (1300)
REAR AXLE
LOADER ATTACHMENTS – Tool Carrier – Quickhitch
JCB rear axles are designed and built specifically for backhoe loaders and incorporate double reduction, outboard
planetary drives and steel drive mechanism front and rear.
Machine Model
2CX
Standard Q-Fit coupler
JCB Max-Trac Torque Proportioning with Outboard Planetary Drive
GP bucket 73”, 0.8 cu yd
Limited Slip
Optional
GP bucket 78”, 1.0 cu yd
Axle Ratings
lb (kg)
Type
Static Load Rating
Dynamic Load Rating
SAE J43 Rating
16,500 (7484)
8300 (3765)
10,220 (4636)
Pallet forks
2 foot truss boom with hydraulic winch
6-in-1 bucket, 73”, 0.8 cu yd
Q-Fit blank
Sweeper/collector
JCB BACKHOE LOADER | 2CX 12 FT
BRAKES
OPERATOR’S AREA
Meets SAE ROPS/FOPS requirements. ISO standards 3471 and 3449 (SAE J1040 and J231):
2CX
The JCB braking system ensures effective, fade-free braking. The self-adjusting, multi-disc arrangement is inboard mounted and
is oil immersed for minimum maintenance and a long operating life. Automatic compensation ensures ‘straight’ machine braking.
2CX
Cab
Canopy
●
Twin brake pedals provide tighter turning circle and enhanced steering control on slippery ground.
Park brake disc diameter: 11.2 in (285 mm).
The independent parking brake is mounted on the input shaft rear axle. It is an over-center type, adjustable within
the cab, with transmission disconnect to prevent premature brake pad wear. Suspension Seat
●
●
●
2” Seat Belt (HD seat w/3” belt option)
●
●
●
4 Front and 2 Rear Work Lamps
●
●
Brake Lights, Hazard Lamps, Turn Signals
●
●
Windshield Wiper and Washer
●
●
Rear Window Wiper and Washer
●
Rear View Mirrors
●
●
Deluxe Floor Mat and Dome Lamp
●
●
Heater/Defogger
●
Openable Right Side and Rear Windows
●
Side Instrument Panel and Switches
●
TIRES
●
Tires listed are most popular sizes. See your JCB Dealer for a full listing. Tires are offered in sets of four.
Machine Model
2CX
12.5-18, 10 ply Industrial
Standard
340/80-R18 XMCL Radial
Optional
340/65 x R18 Turf Tire
Optional
JCB BACKHOE LOADER | 2CX 12 FT
F
12
FT
2
C
X
D
E
12FT
2
C
X
B
C
2
C
X
12FT
A
BACKHOE DIMENSIONS 2CX 12FT
A SAE Dig Depth – Max
SAE Dig Depth – 2’ Flat Bottom
2CX 12FT
ft-in (m)
12-0 (3.66)
11-8 (3.59)
B Reach from Swing Pivot
15-2 (4.61)
C Reach from Rear Axle Center
18-10 (5.74)
D Maximum Operating Height
15-0 (4.59)
E Loading Height
10-11 (3.32)
F Loading Reach
8-9 (2.67)
Swing Arc Rear Frame Width
6-5 (1.95)
180°
King Post Travel
3-4 (1.02)
Bucket Rotation 187°
JCB BACKHOE LOADER | 2CX 12 FT
SERVICE CAPACITIES
LOADER DIMENSIONS
Machine Model
2CX gal (l)
Cooling System
Y
V
R
Q
P
Z
O
3.7 (14)
Fuel Tank
22 (83)
Engine with Filter
2.9 (11)
Synchro Shuttle Trans with Filter
4.5 (17)
Rear Axle
2.4 (9)
Front Drive Axle
2.4 (9)
Drive Axle Hubs – Each
0.5 (2)
Hydraulic System Including Tank
22 (83)
N
HYDRAULIC SYSTEM
S
T
U
Open center system with single gear pump which supplies oil for loader, backhoe and steering. Side mounted hydraulic
tank with sight glass, JCB cylinders, high strength steel tubing, hose protection, return line filter.
W
X
LOADER DIMENSIONS
Machine Model
Open center hydraulic system using simple and reliable high efficiency gear pump.
●
Single pump system with priority valve to ensure metered supply to steering and main hydraulic system.
●
Easily used, ergonomically positioned levers give excellent control of the loader and backhoe, thus reducing
operator fatigue.
●
A full flow 10 micron filter ensures that oil stays free of contaminants.
2CX
BUCKETS
●
ft-in (m)
Overall Width with Bucket
6-6 (2.00)
N Dump Height
8-2 (2.48)
O Load Over Height
9-10 (2.99)
Machine Model
P Loader Hinge Pin Height
10-8 (3.24)
Pump Output gpm (lpm)
Q Maximum Operating Height
12-6 (3.80)
System Relief Pressure
psi (bar)
3335 (230)
R Dump Reach at Full Height
2-4 (0.71)
Filter Rating
5/12 micron
S Rollback @ Ground 45°
T Digging Depth
0-4 (0.10)
V Dump Angle
45°
FORKS
ft-in (m)
W Forks – Tine Length
3-11 (1.20)
Forks – Tine Width
0-4 (0.1)
X Forks Reach at Ground Level
3-4 (1.02)
Y Forks Reach at Full Height
2-4 (0.71)
Z Forks Lift Height – Max
9-11 (3.02)
Forks Spacing – Min/Max
Operating Load
0-6 (0.15) to 4-2 (1.28)
lb (kg)
3526 (1600)
2CX 12FT
17 (63.8)
JCB BACKHOE LOADER | 2CX 12 FT
22
BACKHOE PERFORMANCE
6
20
18
2CX 12 FT Standard Backhoe
5
lb (kg)
16
Standard Dipper
14
Bucket Force
9259 (4200)
Dipper Force Retracted
5483 (2487)
Dipper Force Extended
4343 (1970)
3
+ 4 Feet
3260 (1480)
2
+ 6 Feet
2425 (1100)
+ 8 Feet
2215 (1005)
+ 10 Feet
2260 (1025)
+ 12 Feet
2568 (1165)
+ 12 Feet
1355 (615)
+ 10 Feet
1500 (680)
+ 8 Feet
1520 (690)
+ 4 Feet
1500 (680)
Ground Level
1510 (685)
– 4 Feet
1465 (665)
– 6 Feet
1510 (685)
– 8 Feet
1650 (750)
4
12
Dipper Lift Capacity – SAE J31
10
8
6
4
1
2
0
Boom Lift Capacity – SAE J31
0
2
Lift capacity figures comply with SAE J31. All figures are stated in pounds (kilograms). The large arc indicates boom lift.
The small arc indicates dipper lift with the boom at 68 degrees. Units are equipped with standard equipment as listed
in this data sheet and a 24” general purpose backhoe bucket.
1
4
2
6
Boom
8
3
10
12
4
14
5
16
18
6
20
26
24
8
22
20
7
6
18
16
5
14
12
4
JCB hydraulic breakers are designed for use on JCB Backhoe Loaders. They feature constant blow energy, pressure
damping, heavy-duty side plates and high impact frequency for maximum production. Coupled with factory installed
hydraulic breaker circuit, the JCB breakers and Backhoe Loader make a perfect demolition combination.
HM265Q
Energy Class
ft/lb
381
Impact Frequency
bpm
480-1200
Oil Flow Range
gpm (lpm)
8-17 (30-65)
Operating Weight
lb (kg)
441 (200)
Operating Pressure
psi (bar)
1450-2175 (100-150)
Tool Diameter
in (mm)
A wide variety of tools are available for JCB breakers. See your JCB Dealer.
3
8
6
4
2
2
0 Feet
0 Meters
1
BACKHOE BUCKETS
JCB HYDRAULIC BREAKERS
Breaker Model
10
2.6 (65)
JCB Backhoe Loader buckets are designed specifically for use on JCB machines with pin positions to maximize tearout,
load retention and straight wall digging characteristics.
Bucket Width
in
Bucket Width
mm
Number of Teeth
9
12
16
18
24
48
230
305
405
435
630
1220
2
3
4
4
5
6
General Purpose Trenching Buckets
Capacity
cu ft
1.5
2.0
2.8
3.2
4.3
2.1
Capacity
cu m
0.04
0.06
0.08
0.09
0.12
0.06
Weight
lb
115
125
145
150
185
143
Weight
kg
52.2
56.7
65.8
68.1
83.9
64.9
See your JCB Dealer for availability of other backhoe buckets and attachments.
JCB BACKHOE LOADER | 2CX 12 FT
A GLOBAL COMMITMENT TO QUALITY
JCB’s total commitment to its products and customers has helped it grow from a one-man business into one of the world’s largest manufacturers of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors.
By making constant and massive investments in the latest production technology, the
JCB factories have become some of the most advanced in the world.
By leading the field in innovative research and design, extensive testing and stringent quality control,
JCB machines have become renowned all over the world for performance, value and reliability.
And with an extensive dealer sales and service network in over 150 countries, we aim to deliver the best customer support in the industry.
Through setting the standards by which others are judged, JCB has become one of the world’s most impressive success stories.
JCB Headquarters Savannah, 2000 Bamford Blvd, Savannah, GA 31322 Tel: (912) 447-2000 Fax: (912) 447-2299 www.jcb.com
JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.
DWUSA 2979 12/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising