TIGER® HIGH/UlTRa 180-230 DC + aC/DC

TIGER® HIGH/UlTRa 180-230 DC + aC/DC
The new benchmark in compact TIG units
®
WIG-DC-Punkten
TIGER HIGH/UlTRa 180-230 DC + aC/DC
WIG-DC-Punkten
The big cat among TIG inverters – lighter, stronger and thus more
mobile than any other portable compact TIG power source.
Its predecessor sold 40.000 units so it has
left big shoes to fill. However the new TIGER®
has even exceeded these high expectations
in its many field tests. The new TIG primary
inverter is the ideal companion for mobile
operations thanks to its low weight. The
integrated process possibilities offer exclusive
REHM 17.5 kHz Hyperpuls process that has
set the benchmark for compact TIG units.
The new TIGER® is available immediately in
both versions HIGH and ULTRA. Both versions
feature DC and AC/DC with the option of a
very lightweight, integrated cooling unit.
Light, strong, mobile
With its low weight, compact size and yet a wide variety of functions, the TIGER® is the optimum power source for
all mobile operations on building sites, for service work or for repair welding where access is difficult offering a high
degree of precision welding capabilities.
Maximum Mobility
n The TIGER® weighs between 7.1 and 7.9 kg,
depending upon the version with dimensions
of only 480 x 160 x 320 mm. This makes it
the world champion of flyweights.
n The TIGER® can run with extension cables of
up to 100 m with no problems.
n The optional cooling unit was also designed for
mobile applications. It is significantly smaller and
lighter than comparable units.
n Generator frequency tracking: means that the
TIGER® can also be used with small generators.
Robust, functional build
n The robust plastic housing, a floating chassis and
the mechanically disconnected rotary knob protect
the electronics of the TIGER®. Even against a fall from
a height of 90 cm.
The new drawer under the handle is perfectly suited for storing small
consumables such as TIG electrodes and gas nozzles
nA comfortable carrying handle enables secure
handling in mobile operations. As this is open, the
welder can hang rolled up hose-pack and cables here.
nThe new tunnel ventilation system hinders entry of dust
and dirt particles into the housing components.
nThe integrated drawer in the handle is also practical
for storing small consumables.
Process control optimised for applications
nThe processor control has been optimised for
practical applications. It gives active support to
the welder.
n It enables new welding processes with high customer
benefits:
n DC Hyperpuls
n AC Hyperpuls
n DualWave Hyperpuls
n Hyperspot DC und AC
All versions are available with an integrated water cooling system.
Compact and lightweight. System weight from 15.7 kg
TECHNICAL DATA
TIGER® HIGH
180 DC, AC/DC
TIGER® HIGH
230 DC, AC/DC
TIGER® ULTRA
180 DC, AC/DC
TIGER® ULTRA
230 DC, AC/DC
Setting range
TIG [A]
Electrode [A]
4-180
20-150 (BOOSTER)
4-230
20-180
4-180
20-150 (BOOSTER)
4-230
20-180
Duty cycle (ED)
10 min at 40°C
TIG [%]
Electrode [%]
40
60
35
40
40
60
35
40
[V]
77/91
82/89
77/91
82/89
Mains voltage
(dimensioning voltage)
[V]
[Hz]
1 x 230
50/60
1 x 230
50/60
1 x 230
50/60
1 x 230
50/60
Fuses (delayed action)
[A]
16
16
16
16
Protection type
IP 23 S
IP 23 S
IP 23 S
IP 23 S
Insulation class
F
F
F
F
Gas (Water)
Gas (Water)
Gas (Water)
Gas (Water)
480 x 160 x 320
480 x 160 x 320
480 x 160 x 320
480 x 160 x 320
7.1/7.3
7.5/7.9
7.1/7.3
7.5/7.9
Open circuit voltage
Torch cooling
Dimensions LxWxH
[mm]
[kg]
Weight
Part number gas cooled
1503610 1503620 1503650 1503660 1503510 1503520 1503550 1503560
Part number water cooled
1503611 1503621 1503651 1503661 1503511 1503521 1503551 1503561
Pictures are indicative. Subject to technical change. Optional extras on the units shown are available for an additional price. All units bear the CE and S marks and
correspond to standard EN 60 974-1.
TIGER® ULTRA AC/DC 180 A / 230 A
Versions HIGH and ULTRA
HIGH and ULTRA are available as DC or AC/DC. The version
TIGER® ULTRA offers the additional functions: 17.5 kHz Hyperpulsing,
Dual Wave, 99 programme memory with a large free capacity for storing
various welding parameters.
TIGER® HIGH DC 180 A / 230 A
TIGER® HIGH AC/DC 180 A / 230 A
TIGER® ULTRA DC 180 A / 230 A
The further improved control includes not only ONE KNOB
OPERATION but also function buttons for reliable and fast
operation of the TIGER®
REHM – Setting the pace in welding
THE REHM PERFORMANCE PROGRAM
REHM MIG/MAG shielded arc welding units
SYNERGIC.PRO2® gas and water cooled up to 450 A
SYNERGIC.PRO2® water cooled 500 A up to 600 A
MEGA.ARC2® continuously adjustable up to 450 A
PANTHER 202 PULS pulsed arc welding unit with 200 A
MEGA.PULS FOCUS® pulsed arc welding units up to 500 A
REHM TIG shielded arc welding units
TIGER® HIGH/ULTRA 180-230 DC + AC/DC
INVERTIG.PRO® and INVERTIG.PRO® digital 240 A to
450 A, three phase
INVERTIG.PRO COMPACT and INVERTIG.PRO
COMPACT digital 240 A to 450 A, three phase
REHM manual arc welding units
BOOSTER 140, BOOSTER.PRO 170 and 210, single phase
BOOSTER.PRO 250 and 320, three phase
Welding rotators
REHM Plasma cutting units
Welding accessories and filler material
Weld fume extractors
Technical welding consultancy
Torch repairs
Service
Tel.:
Fax:
+49 (0) 71 61/30 07-77
+49 (0) 71 61/30 07-60
REHM online:
www.rehm-online.de
REHM GmbH u. Co. KG Schweißtechnik
Ottostrasse 2 · D-73066 Uhingen
Tel.: +49 (0) 71 61-30 07-0 | Fax: +49 (0) 71 61-30 07-20
E-Mail: rehm@rehm-online.de | Internet: www.rehm-online.de
© REHM GmbH u. Co. KG Schweißtechnik - 06/2016
REHM Service Hotline:
REHM Uhingen
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising