AC/DC Voltage Sensor CYVS-xnS0 - Cy

AC/DC Voltage Sensor CYVS-xnS0 - Cy
ChenYang
Version 2
Released in May 2016
Dr.-Ing. habil. Jigou Liu
Technologies GmbH & Co. KG
AC/DC Voltage Sensor CYVS-xnS0
The CYVS-xnS0 AC/DC voltage sensor/transducer works according to Linear Photoelectrical
Isolation and is designed for applications to measurement and monitoring of AC/DC voltage and
DC impulse voltage. The output voltage of this transducer is proportional to the input voltage.
They are suitable for measurements and long time monitoring of AC/DC voltages and can
applied to power supply management, motor drivers, battery chargers and systems etc.
Specifications
Rated input voltage (Ux)
Frequency range
Linear measuring range
Overload capacity
Input response
Input resistance
Output signal
Measuring accuracy
Load capacity
Response time
Thermal drift
Power supply
Static current
Isolation
Isolation withstanding voltage
Operating temperature
Storage temperature
Relative humidity
Protection of Case
Material of Case
Mounting
Case Style
MTBF
Unit weight
50mV-500V AC/DC (DC calibration, option: AC calibration)
DC , 20Hz–10kHz
0 - 1.2 times of rated input voltage
2 times of rated input voltage
Uni-directional DC, Bi-directional DC and AC voltages
Ri>1MΩ for Ux≤1V, Ri=Ux x 10kΩ/V for Ux >1V, Ux : input voltage
Tracing voltage ±5V AC/DC, DC Output 0-5V, 0-20mA, 4-20mADC
0.2% for tracing voltage output, 0.5% for DC voltage & current output
voltage output: 5mA, current output: 6V
≤15µs for tracing output, 250ms for DC voltage & current output
150ppm/°C for tracing output, 250-300ppm/°C for DC output
±12VDC, ±15VDC, 12VDC, 24VDC
25mA for tracing output, 34mA+Output current for DC output
Isolation between input and output, power supply at the output
1.5 kV DC, 1min
-10°C ~ +60°C
-25°C ~ + 70°C
10% ~ 90%
IP20
ABS (according to UL94V-0)
DIN Rail
S0 without aperture
50000h
90g
Definition of Part number:
CYVS
(1)
-
x
n
S0
(2)
(3)
(4)
-
0.2
-
(5)
(6)
(1)
(2)
(3)
(4)
(5)
Series name
Output signal
Power supply
Case
style
Accuracy
class
0.2%
x=1: ±5V AC/DC
CYVS
x=3:
x=4:
x=5:
x=8:
0-5V DC
0-20mA DC
4-20mA DC
0-10V DC
Markt Schwabener Str. 8
D-85464 Finsing
Germany
n=5: ±12V DC
n=6: ±15V DC
n=2: 12V DC
n=4: 24V DC
m
S0
(6)
Input Voltage range
(m)
m=50mV-500V AC/DC
0.5%
n=4: 24V DC
Tel: +49 (0)8121-2574100
Fax: +49 (0)8121-2574101
Email: info@chenyang-gmbh.com
http://www.chenyang-gmbh.com
ChenYang
Version 2
Released in May 2016
Dr.-Ing. habil. Jigou Liu
Example 1:
Technologies GmbH & Co. KG
CYVS-15S0-0.2-100V, AC/DC voltage sensor with
Output signal: ±5V AC/DC
Power supply: ±12V DC
Rated input voltage: ±100V AC/DC
DIMENSIONS (mm)
A
Input
terminal
Input
Terminal
Output
Terminal
Case
cover
DIN Rail
Output
terminal
Spring bolt
View of A Direction
Voltage
Input(U+)
GND (power supply & output )
DC Current Output
Power Supply (-E)
1
6
3
4
6
Voltage
Input (U-)
5
2
3
1
Power supply (+E)
4
DC voltage output
Tracing voltage output
Please don‘t use the undefined terminals
Dimensions: 105mm x 24mm x 66mm
Markt Schwabener Str. 8
D-85464 Finsing
Germany
Tel: +49 (0)8121-2574100
Fax: +49 (0)8121-2574101
Email: info@chenyang-gmbh.com
http://www.chenyang-gmbh.com
ChenYang
Version 2
Released in May 2016
Dr.-Ing. habil. Jigou Liu
Technologies GmbH & Co. KG
CONNECTION
Wiring of Terminals for Tracing Voltage Output:
1: +12V, +15VDC
U+ 4
4 OUT
IN
3 GND
OUT
U- 6
4
U-
Vo
6
CYVS
4: OUT
3: GND
2
1
+E
2: -12V, -15VDC
U+
-E
Input Terminals:
4, 6: Input Voltage U+ and U-;
Output Terminals:
1, 2: Power Supply +E and -E
3: GND (for power supply and output)
4: Tracing Voltage Output
The power supply +E and -E can be generated by using two voltage sources:
Voltage
source 1
+
-
+E
GND
Voltage
source 2
+
-
-E
Relation between Input and Output:
Sensor CYVS-15S0-0.2-100V
Input Voltage (V)
Output voltage (V)
-100
-5
-50
-2.5
0
0
50
2.5
100
5
Markt Schwabener Str. 8
D-85464 Finsing
Germany
Tel: +49 (0)8121-2574100
Fax: +49 (0)8121-2574101
Email: info@chenyang-gmbh.com
http://www.chenyang-gmbh.com
V
ChenYang
Version 2
Released in May 2016
Dr.-Ing. habil. Jigou Liu
Technologies GmbH & Co. KG
Wiring of Terminals for DC voltage output:
1: +12V, +24V DC
U+ 4
5 OUT
IN
OUT
U- 6
3 GND
4
3: GND
Vo
U+
CYVS
U1
+E
IN
GND
4, 6: Input Voltage;
1: +12V or +24V Power Supply
V
3: GND
6
3
5: OUT
OUT
3: GND
5: Voltage output
Relation between Input and Output:
Sensor CYVS-32S0-0.5-100V
Input Voltage (V)
Output voltage (V)
0
0
25
1.25
50
2.5
75
3.75
100
5
Wiring of Terminals for Current Output:
U+ 4
1: +12V, +24V DC
6 OUT
IN
OUT
U- 6
3 GND
4
3: GND
U+
U-
Vo
6
CYVS
6: OUT
3: GND
1
+E
Io
≤250Ω
3
IN
GND
4, 6: Input Voltage;
1: +12V or +24V Power Supply
OUT
3: GND
6: Current output
Relation between Input and Output (for Rm=250 Ω):
Input Voltage (V)
0
25
50
75
100
Markt Schwabener Str. 8
D-85464 Finsing
Germany
Sensor CYVS-54S0-0.5-100V
Output current Io(mA)
Output voltage Vo (V)
4
1
8
2
12
3
16
4
20
5
Tel: +49 (0)8121-2574100
Fax: +49 (0)8121-2574101
Email: info@chenyang-gmbh.com
http://www.chenyang-gmbh.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising