iTrack 3 - Foxi Finder Systems

iTrack 3 - Foxi Finder Systems
Foxi Finder (FF) – iTrack 3
3G VEHICLE GPS TRACKER
ITrack 3 USER GUIDE
Copyright and Disclaimer
 All copyrights belong to Foxi Finder Systems LTD. You are not allowed to revise,
copy or spread this file in any form without consent of Foxi Finder.
 Please read this user guide carefully before installation to avoid any possible
personal injury or property loss.
Copyright © Foxi Finder
2
ITrack 3 USER GUIDE
Contents
1 Product Overview ............................................................................................... 3
2 Product Functions ............................................................................................... 4
3 Product and Accessories ..................................................................................... 6
3.1 Standard Packing Box....................................................................................................... 6
3.2 Optional Accessories ........................................................................................................ 6
4 Product Appearance ........................................................................................... 7
5 LED Light ............................................................................................................ 7
6 First Use ............................................................................................................. 8
6.1 Charging ........................................................................................................................... 8
6.2 Installing the SIM Card ..................................................................................................... 8
6.3 Installing GSM/GPS Antenna ........................................................................................... 9
7 Device Installation .............................................................................................. 9
7.1 I/O Installation ................................................................................................................. 9
7.2 Power/GND Cable .......................................................................................................... 11
7.3 Positive/Negative Digital Input (IN1/IN2/IN3/IN4).......................................................... 12
7.4 Analog Input (AD) .......................................................................................................... 12
7.5 Output control (OUT1/OUT2) ........................................................................................ 13
8 Device Usage ..................................................................................................... 13
1 Product Overview
iTrack 3 is a 3G GPS/GSM tracker which is suitable for:
- fleet management
- public transportation management
- school bus
- taxi operation
- vehicle insurance company
- Car rental
- etc..
iTrack 3 supports RS232 and 1-wire connection protocol, which enables to have powerful functions
Copyright © Foxi Finder
3
ITrack 3 USER GUIDE
such as picture taking, driver identification (finger print), impulse detection and temperature
monitoring.
2 Product Functions
Main Features:
- GPS/GSM Real time tracker
- 3G model, works all over the world.
- SOS button
- fuel monitoring
- acceleration/braking alarm
- driving behavior analysis
- jamming detection
- two-way calling
- Camera connection for pictures
- Temperature sensor
- Fatigue alarm
- Parking alarm
- Motion and Movement alarm
- Voice monitoring
- Engine ACC control
- And much much more!
Service Plan
This Product requires a service plan of 5 USD / month which includes:
- Online platform for tracking
- Mobile App (iOS/Android) for tracking
- Data usage for service
- Push Notification / SMS notification
Item
Specification
Dimension
90*60*27mm
Weight
145g
Copyright © Foxi Finder
4
ITrack 3 USER GUIDE
GSM Module
3G (850/900/1900/2100
GPS Module
U-blox 7Q
Input Voltage
DC 11~36V/1.5A
Backup Battery
600 mAh / 3.7V
Power Consumption
30-65mA standby current
Internal Battery Life
12 hours in working mode
Operating Temperature
-20℃~70℃
Humidity
5%~95%
Sensor
3D Accelerator sensor
GPS Sensitivity
-161dBm
850/900/1800/1900)
Cold start 35s
GPS Start Speed
Position Accuracy
Hot start 1s
10 meters
4 digital input - 1 negative input, 1 positive input, 2
custom input (Default 1 positive input, 1 negative
input )
2 analog input, voltage range:
AD1 ~ 0~6V
AD2 ~ 0~12V
I/O Port
2 output
1 RS232 port (camera/RFID reader/ultrasonic fuel
sensor/fingerprint)
1-wire protocol (temperature sensor)
1
Impulse
detection
(Default
speedometer
detection)
1 USB port
Copyright © Foxi Finder
5
ITrack 3 USER GUIDE
3 Product and Accessories
3.1 Standard Packing Box
Main Unit
Wire
GPS Antenna
GSM Antenna
USB Cable
Relay
Microphone
Speaker
AS10 Fuel Sensor
Calibrator
RFID reader
Tag
Camera
i-Button Reader
3.2 Optional Accessories
TUB01 ultrasonic fuel
sensor
LED for TUB01
Fingerprint
Copyright © Foxi Finder
6
ITrack 3 USER GUIDE
4 Product Appearance
5 LED Light
GPS Light (Green)
Off
Power off or sleep
Flash 0.1s on and 3S off
GPS valid
Flash every 0.1s
GPS antenna cut
Flash 2s on and 2s off
No GPS signal
On
GPS module power problem
GSM Light (Orange)
Copyright © Foxi Finder
7
ITrack 3 USER GUIDE
Off
Power off or sleep
Flash 0.1s on and 3s off
GSM available
Flash every 0.1s
Device is initialing
Flash 2s on and 2s off
No GSM
External Power Light(Red)
Off
External power cut
Flash every 0.1s
External power low
On
External power normal
6 First Use
6.1 Charging
First time use iTrack 3, please connect positive wire (+ Red) and ground wire(-black) to 12V or 24V
external power supply, charging device for at least 2 hours, 3 hours is suggested. Before installation,
ensure all the parameters setting and test are finished.
6.2 Installing the SIM Card

Device supports 2G and 3G network.

Ensure the SIM card has enough balance.

Ensure PIN code has been closed.

Authorization SOS numbers can’t work well if SIM card doesn’t have caller ID service. E.g.: device
can’t reply SMS to authorization SOS number because SIM card can’t identify incoming call.

SIM card should have GPRS function for platform tracking.

Turn off device before SIM card installation.
Screw off and open the front cover
Copyright © Foxi Finder
8
ITrack 3 USER GUIDE
Insert SIM card into SIM card slot
Make sure the chip is facing to PCB. Pay
attention
to
the
cutaway
angle
direction of SIM card.
Close front cover and lock the screw
6.3 Installing GSM/GPS Antenna
Connect GSM Antenna to SMA connector with “GSM” silk. The GSM antenna’s signal is
omnidirectional, you can hide it anywhere that is far from the power supply.
Connect GPS Antenna to SMA connector with “GPS” silk. GPS antenna should face to the sky for
stronger GPS signal reception, and the silvery silk side should be downward. Fix GPS antenna with
double sided tapes for stable signal reception.
Don’t install the GPS antenna where shielded by metal. For example, inside a metal can.
7 Device Installation
7.1 I/O Installation
I/O wire has 14 pins, including power, digital positive and negative input, output, analog input,
impulse detection and 1-wire protocol cables.
Copyright © Foxi Finder
9
ITrack 3 USER GUIDE
VCC
IN2
IN4
OUT2
AD2
PLS
DC5V
GND
IN1
IN3
OUT1
AD1
iBtn
GND
I/O
Color
Function
VCC
Red
Positive power, connect to positive of vehicle battery, input voltage range
11-36V
GND
Black
GND, connect to negative of vehicle battery or the vehicle’s iron part.
IN2
White
Digital input2, positive input, default connect to ACC for status detection.
IN1
White
Digital input1, negative input (default SOS button)
IN4
White
Digital input4, custom input, default negative.
IN3
White
Digital input3, custom input, default positive.
OUT2
Yellow
Output2
Output active: low level (0V)
Output inactive: open drain (OD)
Max open-drain (inactive) voltage: 45V
Max current for output low voltage (valid): 500mA
OUT1
Yellow
Output1
Output active: low level (0V)
Output inactive: open drain (OD)
Max open-drain (inactive) voltage: 45V
Max current for output low voltage (valid): 500mA
AD2
Blue
12 bits analog input, supports voltage range 0-12V. Connect to external
sensor, e.g., fuel sensor.
AD1
Blue
12 bits analog input, supports voltage range 0-6V. Connect to external
sensor, e.g., fuel sensor.
Copyright © Foxi Finder
10
ITrack 3 USER GUIDE
PLS
Brown
Impulse detection, 0~100kHz
GND
Black
1-wire protocol port for i-Button and temperature sensor
DC5V
Orange
iBtn
Purple
RS232|MIC|SPK Port
DC5V
MCU_RS232_TX
MIC+
SPK+
GND
MCU_RS232_RX
MIC-
SPK-
I/O
Function
DC5V
RS232 port for camera/RFID Reader/Ultrasonic fuel sensor/fingerprint
GND
scanner or other RS232 interface devices.
MCU_RS232_TX
MCU_RS232_RX
MIC+
Microphone port
MICSPK+
Speaker port
SPK-
7.2 Power/GND Cable
Copyright © Foxi Finder
11
ITrack 3 USER GUIDE
7.3 Positive/Negative Digital Input (IN1/IN2/IN3/IN4)
7.4 Analog Input (AD)
ITrack 3 supports 2 AD input, whose voltage range:
AD1: 0~6V
AD2: 0~12V
Calculation formula:
AD1 Voltage=(AD1)*3300*2/4096
AD2 Voltage=(AD2)*3300*62/(4096*15)
Note:Original AD value is in hexadecimal. Convert it to decimal first, and then use the formula.
Copyright © Foxi Finder
12
ITrack 3 USER GUIDE
7.5 Output control (OUT1/OUT2)
8 Device Usage
For using the device, please download the Foxi Finder app (iOS / Android) to track, monitor and
control.
Copyright © Foxi Finder
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising