Selectable Output Strobe and Horn/Strobes

Selectable Output Strobe and Horn/Strobes
A U D I B L E / V I S I B L E
N O T I F I C A T I O N
Selectable Output Strobe
and Horn/Strobes
Models Available
Strobes
Red
S1224MC
S1224MCP
S1224MCK
S1224MCSP
P1224MC Horn/Strobe
White
S1224MCW
S1224MCPW
Horn/Strobes
Red
P1224MC
P1224MCP
P1224MCK
P1224MCSP
White
P1224MCW
P1224MCPW
Horns
Red
H12/24
H12/24K
White
H12/24W
S1224MC Strobe
Product Overview
Operates on either 12V or 24V
Widest range of candela options:
12V: 15 and 15/75 candela
24V: 15, 15/75, 30, 75, 110 candela
Easy candela selection
Lower current draw
Easy DIP switch selection for horn
options
Easy mounting with QuickClick™
Synchronizable with MDL
Sync•Circuit™ module
Meets UL1971, NFPA72, and ADA
signaling requirements
All strobe and horn/strobe models incorporate a
new patent-pending voltage booster design that
has a more consistent flash bulb voltage over
the range of candela selections. The benefit to
the customer is a high quality strobe device.
S5512
S4011
7125-1209:222
7135-1209:223
CS549V602NK17954
CS549V702NK13751
3014150
122-02-E
126-02-E
SpectrAlert® Selectable Output Horns, Strobes, and Horn/Strobes offer enhanced features that include the widest range of candela options available and the capability to
recognize and self-adjust for either 12 or 24 volt operation. With an overall feature
set that combines performance, installation ease, flexibility, and a consistent,
aesthetically pleasing appearance, the SpectrAlert Selectable Output devices
provide both the innovation and efficiency synonymous with the SpectrAlert name.
Performance. SpectrAlert selectable output wall-mount horns, strobes, and horn/strobes
offer key performance features long associated with the SpectrAlert name. The selectable candela strobes and horn/strobes offer average current draws that are not only
lower than conventional fixed-candela SpectrAlert products, but also lower than similar
selectable candela products. By consuming less current, the ability to connect even more
devices per loop is possible, resulting in a lower installed cost.
Installation. SpectrAlert selectable output horns, strobes, and horn/strobes offer the
same installation-friendly features synonymous with the SpectrAlert name, such as the
option of 2- and 4-wire operation; the ability to use standard size backboxes with no
encroachment into the box; and universal mounting incorporating the labor-saving
QuickClick™ feature. Such labor-savings features make wire connections simple and fast,
further reducing installed cost.
Flexibility. SpectrAlert selectable output strobes and horn/strobes offer the broadest
range of candela options. In addition, the selectable output strobes and horn/strobes
can operate on either 12V or 24V, with no setting required; the device recognizes and
self-adjusts to the correct current automatically. Temporal 3 or Continuous tone options
continue to be available, in either an Electromechanical or 3kHz pattern.
Aesthetics. SpectrAlert selectable output horns, strobes, and horn/strobes incorporate
the same stylish, low profile design of the conventional SpectrAlert products, for a consistent and aesthetically pleasing appearance across the entire product line.
Engineering Specifications
General
SpectrAlert horns, strobes and horn/strobes shall be capable of
mounting to a standard 4″ × 4″× 11/ 2″ back box or a single gang
2″ × 4″ × 17/ 8″ back box using the universal mounting plate
included with each SpectrAlert product. Also, SpectrAlert products, when used in conjunction with the accessory Sync•Circuit
Module, shall be powered from a non-coded power supply
and shall operate on 12 or 24 volts. 12 volt rated devices shall
have an operating voltage range of 9–17.5 volts. 24-volt rated
devices shall have an operating voltage range or 17–33 volts.
SpectrAlert products shall have an operating temperature of
32° to 120°F and operate from a regulated DC or full wave
rectified, unfiltered power supply.
Strobe
Strobe shall be a System Sensor SpectrAlert Model _______
listed to UL 1971 and be approved for fire protective service. The
strobe shall be wired as a primary signaling notification appliance
and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1Hz over the
strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system.
Horn/Strobe Combination
Horn/Strobe shall be a System Sensor SpectrAlert Model
_______ listed to UL 1971 and UL 464 and shall be approved for
fire protective service. Horn/strobe shall be wired as a primary
signaling notification appliance and comply with the Americans
with Disabilities Act requirements for visible signaling appliances,
flashing at 1Hz over the strobe’s entire operating voltage range.
The strobe light shall consist of a xenon flash tube and associated
lens/reflector system. The horn shall have two tone options, two
audibility options (at 24 volts) and the option to switch between
a temporal 3 pattern and a non-temporal continuous pattern.
Strobes shall be powered independently of the sounder with the
removal of factory installed jumper wires. The horn on horn/
strobe models shall operate on a coded or non-coded power supply (the strobe must be powered continuously).
Synchronization Module
Module shall be a System Sensor Sync•Circuit _______ listed
to UL 464 and shall be approved for fire protective service. The
module shall synchronize SpectrAlert strobes at 1Hz and horns
at temporal 3. Also, the module shall silence the horns on horn/
strobe models, while operating the strobes, over a single pair of
wires. The module shall be capable of mounting to a 411/16″ ×
411/16″× 21/8″ back box and shall control two Style Y (class B) or
one Style Z (class A) circuit. Module shall be capable of multiple
zone synchronization by daisy chaining multiple modules together
and re-synchronizing each other along the chain. The module
shall not operate on a coded power supply.
Specifications
Walk Test
SpectrAlert horn/strobe and horn only
work on “walk tests” with time durations of 4 seconds or greater
Input Terminals
12 to 18 AWG
Dimensions
Strobe and horn/strobe with universal
plate
5″ × 5 5/8″ × 2 15/16″
Weight, strobe and horn/strobe
8.8 oz.
Operating voltage range*
12V: 8–17.5V; 24V: 16–33V
Mounting
4″ × 4″ × 1 1/2″ or 2″ × 4″ × 1 7/8″
standard boxes
Operating voltage range* (with
Sync•Circuit module, MDL)
12V: 9–17.5V; 24V: 17–33V
Indoor Operating Temperature
32°F to 120°F (0°C to 49°C)
*Note for Strobes: Do not exceed; 1)
16–33 or 8–17.5 voltage range limit;
2) maximum number of 70 strobe lights
when connecting the MDL Sync module
with a maximum line impedance of 4
ohms per loop and; 3) maximum line
impedance as required by the fire alarm
control manufacturer
Maximum humidity
95% as tested per UL464
Strobe and horn/strobe with small
footprint plate
3 3/8″ × 5 5/8″ × 2 5/16″
Operating Temperature
Weatherproof (horn and horn/strobes)
32°F to 150°F (0°C to 66°C)
Horn with universal mounting plate
5″ × 5 5/8″ × 1 5/16″
(outdoor strobe only)
–40°F to 158°F (–40°C to 70°C)
Horn without mounting plate
2 15/16″ × 5 5/16″ × 1 5/16″
ULC Canadian Models
–40°C to 66°C
Weight, horn only
7.2 oz.
Voltages
12 or 24VDC and FWR unfiltered
U.S. Patent Numbers
5,593,569
5,914,665
6,049,446
SpectrAlert Current Draw
Series
S1224MC
Strobes
P1224MC
Horn/Strobes
FWR Operating
Current–Strobe
(mA RMS)
12V
24V
112
64
135
74
93
158
208
112
64
135
74
93
158
208
Candela
Setting
15
15/75
30
75
110
15
15/75
30
75
110
DC Operating Current–
Strobe
(mA RMS)
12V
24V
127
59
127
69
90
160
209
127
59
127
69
90
160
209
H12/24 Horns
FWR Operating
Current–Horn
(mA RMS)
12V
24V
DC Operating
Current–Horn
(mA RMS)
12V
24V
45.7
45.7
44.4
44.4
57.5
57.5
57.5
57.5
57.5
57.5
45.7
44.4
Horn
Audibility
(dBA)
57
57
57
57
57
57
75
75
75
75
75
75
SpectrAlert Mounting and Operation
Candela Selections
Selectable Horn Tones
For strobe candela selection, adjust slide switch located on the Temporal
Low Volume
rear of the product while watching the viewing window on the
side of the reflector.
Electromechanical
3000 Hz Interrupted
High Volume
Permissible Candela Settings
Candela
Setting
Viewing Window
Operating Voltage
12V
24V
15
OK
OK
15/75
OK
OK
30
OK
75
OK
110
OK
Electromechanical
3000 Hz Interrupted
Non-Temporal
Low Volume
Electromechanical
3000 Hz Interrupted
High Volume
Electromechanical
3000 Hz Interrupted
DIP Switch Operation
OFF
A0133-00
Low
Temporal
Electromech.
ON
Factory
Default
DIP Switch
High
Non-Temporal
3000Hz
Base (rear)
A0110-00
Typical weatherproof mounting with universal plate
WBB
Plate
#8-36 x 1/2″ Flat Head
Screw (4 total)
A0120-00
Gasket
Conduit
Entrance
Slot
Paper Liner
For Plate
Gasket
Locking Rib
SpectrAlert Ordering Information
Model
Description
Model
Description
P1224MC
Selectable Output Horn/Strobe, 12/24 volt, red
H12/24
Horn, 12/24 volt, red
P1224MCW
Selectable Output Horn/Strobe, 12/24 volt, white
H12/24W
Horn, 12/24 volt, white
P1224MCP
Selectable Output Horn/Strobe, 12/24 volt, red,
plain housing
H12/24K
Horn, 12/24 volt, red, weatherproof
P1224MCPW
Selectable Output Horn/Strobe, 12/24 volt,
white, plain housing
P1224MCK
Selectable Output Horn/Strobe, 12/24 volt, red,
weatherproof
P1224MCSP
Selectable Output Horn/Strobe, 12/24 volt, red,
“FUEGO” housing
Accessories
MDL
Sync•Circuit Module, red
MDLW
Sync•Circuit Module, white
MDLA
Sync•Circuit Module, red, Canadian model
MDLWA
Sync•Circuit Module, white, Canadian model
S-MP
Small Footprint Mounting Plate, red, for singlegang back box
S1224MC
Selectable Output Strobe, 12/24 volt, red
S1224MCW
Selectable Output Strobe, 12/24 volt, white
S-MPW
S1224MCP
Selectable Output Strobe, 12/24 volt, red, plain
housing
Small Footprint Mounting Plate, white, for singlegang back box
BBS
Sur face Mount Back Box Skir t, red
S1224MCPW
Selectable Output Strobe, 12/24 volt, white,
plain housing
BBSW
Sur face Mount Back Box Skir t, white
S1224MCK
Selectable Output Strobe, 12/24 volt, red,
weatherproof
D-MP
Universal Mounting Plate (replacement), red
D-MPW
Universal Mounting Plate (replacement), white
S1224MCSP
Selectable Output Strobe, 12/24 volt, red,
“FUEGO” housing
WBB
Weatherproof Back Box
Notes
Agency Listings – Indoor models: UL, ULC, FM, CSFM, MEA. Weatherproof models: UL, CSFM (strobe only), MEA, ULC.
All of these SpectrAlert products are designed for wall mount only. All weatherproof models must use weatherproof back box model WBB. Installation
of less than 75 candela strobes may be permissible under the equivalent facilitation clause of the ADAAG (Sec. 2.2). However, it is the responsibility of
the person or entity designing the fire alarm system to determine the acceptability of less than 75 candela strobes. All 15/75 candela strobes or horn/
strobes are recommended for 20′ × 20′ rooms or less.
System Sensor Sales and Service
System Sensor Headquarters
3825 Ohio Avenue
St. Charles, IL 60174
Ph: 800/SENSOR2
Fx: 630/377-6495
Documents-on-Demand
800/736-7672 x3
www.systemsensor.com
System Sensor Canada
Ph: 905.812.0767
Fx: 905.812.0771
System Sensor in China
Ph: 86.29.524.6253
Fx: 86.29.524.6259
System Sensor – Far East
Ph: 85.22.191.9003
Fx: 85.22.736.6580
System Sensor – India
Ph: 91.124.237.1770 x.2700
Fx: 91.124.237.3118
System Sensor Europe
Ph: 44.1403.891920
Fx: 44.1403.891921
System Sensor in Singapore
Ph: 65.6273.2230
Fx: 65.6273.2610
System Sensor – Australia
Ph: 613.54.281.142
Fx: 613.54.281.172
System Sensor – Russia
Ph: 70.95.937.7982
Fx: 70.95.937.7983
© 2004 System Sensor. The company reserves the right to change product specifications without notice.
A05-0325-003•5/04•#1200
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising