DC CONTROLLER MU1000C
DC CONTROLLER
MU1000C
Battery voltages: 24 up to 220VDC
· Wide measuring and supply
voltage range
· Easy programming via RS232-interface
with PC
· Wide range of monitoring and
signalling functions
· Temperature compensation of the
charge voltage for PSS-rectifiers
· Alphanumeric LCD display for
measuring values and system
parameters
· CAN-Bus interface
DC power supply systems with battery backup in all
areas of industry, power generation and power
distribution.
The DC controller MU1000C is a built-in module for
front panel mounting for control, monitoring and
signalling of DC–power supply systems with battery backup. The units are easy to use and they are
programmable via keys at the front panel or via
RS232 interface and PC.
The control of all connected PSS–rectifiers, DC-DC
converter and inverter modules is realized via a
CAN communication bus.
The measuring values and operation states of the
devices are shown on the alphanumeric display.
The designations of all inputs are individually programmable. Different relay outputs are available
for remote signalling of single or general faults.
Single faults and their linkages can be assigned
user defined to the relay outputs.
In addition to internal text messages several front
side LED’s indicate the state of main system parameters (2 LED’s are free programmable).
The functionality of the basic module can be upgraded with optional extension boards.
Type
MU1000C-I Language
Article code
300-110-660.00
MU1000C-II Language
300-110-770.00
Supply voltage range
18-80VDC
80-300VDC
Voltage measuring range
0-100VDC
0- 300VDC
Input power consumption
appr. 3W
Voltage measuring inputs
3, accuracy 1%; 3 x mains voltage and frequency (with optional mains monitoring board only )
Current measuring inputs
3 (1 x ± 60mV for battery charge / discharge current measurement; (2 x + 60mV)
3 x mains current (option: Battery monitoring board)
Temperature measuring input
1 (for optional temperature sensor )
PE–connector
1 (isolation fault)
Digital measuring inputs
8 (free programmable)
Alphanumeric display
LCD, 2x16 characters, with backlight
LED indications
Operating, V>Vmin, V>V max, isolation fault, S1/S2 (free programmable LED indications), alarm A
(general fault, urgent alarm), alarm B (free programmable linkage of single faults, non urgent alarm)
Relay outputs
4 relay contacts, error messages free programmable, extension to 10 free programmable relays (with
optional relay board)
Configuration/interfaces
RS232 interface, CAN interface
Communication
CAN-bus interface for communication with PSS/PSR-rectifier modules, UNV–inverter modules and UNB
modules; RS232 interface for external modem control (optional) and programming of all functions and
parameters via PC
Functions
Boost charge control (current-, voltage- and time dependent); battery test (voltage- and time dependent); controlling of voltage drop-down diodes; battery low protection; battery midpoint voltage monitoring; isolation fault monitoring
Microprocessor controlling
Programmable monitoring functions with history function, real time clock,
device parameters via front keys and alphanumeric display
Languages
German, English, Swedish, Italian, Russian, Czech, French
Ambient temperature
Operation: -20°C to +55°C, storage: -40°C to +85°C
Climatic conditions
IEC 721-3-3 class 3K3/3Z1/3B1/3C2/3S2/3M2
Max. installation altitude
≤ 1500m
Audible noise
≤ 30dB (A) in 1m distance
Construction
Built-in module for front panel mounting, rear side connectors
Dimensions (W/H/D)
142/129/70mm
Weight
approx. 0,6kg
Type of enclosure / Protection class
IP20 (mech.); 1 acc. to EN 60950 (electr.)
Colour (front panel)
RAL 7035
CE conformity
yes
Compliance to safety standards
EN 60950-1; VDE 0100 part 410; VDE 0110, EN 50178, EN 60146
Compliance to EMC standards
EN 55022 class „B“, EN 61000-4 part 2-5
Article code
Designation
300-110-000.CZ
Czech language for the alphanumeric display/further languages on request
300-110-000.F
French language for the alphanumeric display/further languages on request
300-110-000.RUS
Russian language for the alphanumeric display/further languages on request
302-110-CON.00
MU1000C configuration software, Win based PC software (once/customer)
302-DCC-0MM.00
Mains monitoring board 1/3 phase; DIN rail module; connection via CAN interface
302-DCC-0BM.00
Battery monitoring board (up to 3 additional battery strings; U,U/2,I,T); DIN rail module
302-DCC-DI8.00
Signalling board with 8 digital alarm inputs; DIN rail module; connected via CAN interface
302-DCC-0RB.00
Relay board with 6 isolated signalling outputs; DIN rail module; connected via CAN interface
880-300-TMP.01
Temperature sensor LM335 with 4 m connecting cable and cable shoe
DS_MU1000C_2007_E_R02 - Subject to change without notice - Eltek Valere Industrial GmbH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising