IR-463SS, IR-464SS, IR-365SS Stainless Steel Apartment Intercom

IR-463SS, IR-464SS, IR-365SS Stainless Steel Apartment Intercom
Innovations in Communications TM
since 1955
IR-464SS
STAINLESS STEEL APARTMENT STATIONS
Round Button - QuantumTM Style
APPLICATION
IR-464SS stainless steel, flush mount apartment stations are
sized to fit conventional Lee Dan mounting hardware. Installation
is fast, and maintenance is minimal, to save you money.
Choose IR-464SS for projects requiring all metal construction,
or wherever vandalism is a problem. IR-464SS is ideal for city
housing projects, transient residencies, dormitories, and jails,
or wherever durability and long service life is desired.
SPECIFICATIONS
Suite stations shall be Lee Dan model IR-464SS or approved equal.
Heavy duty 6 amp rated, chrome plated, solid brass, round metal buttons
shall be provided for TALK, LISTEN, and DOOR operations. Pushbutton
connections must be made by positive screw terminals by circuit board.
Pigtail connections are not acceptable. Stations shall be permanently
stamped with TALK/LSTN/DOOR legends for tenant operation. The
speaker/microphone shall be a mylar cone high sensitivity type with
voice-frequency response. Paper cone speakers are not acceptable.
Speaker shall be protected by a double metal speaker baffle. Station shall
be constructed of 18 gauge stainless steel. Mounting screws shall be
tamper resistant Scrulox type.
Size:
Finish:
6 7/8"H, 5" W, 1 1/4"D. Projects only 3/16" from
mounting surface.
Holes: Two (2) horizontal holes, to fit Lee Dan models
IH-101, IH-101B, IH-102 and OH-700 hardware.
Controls:
Individually replaceable Talk, Listen and Door
Release, chrome plated, solid brass, self-wiping
buttons. Stamped TALK, LSTN, DOOR legends.
Flat, 18 Gauge Stainless Steel.
Speaker: 3" , 1 Watt, 45 Ohm. Heavy duty magnet
with voice-frequency response. Also used for
electronic tone signal from the lobby panel.
Baffle: Double metal speaker baffle.
IR-464SS (shown smaller than actual size)
Mounting Methods
Flush: Use Lee Dan IH-101 or IH-101B (box),
or IH-102 (ring).
Surface: Use Lee Dan OH-700 black box.
Screws: Two (2) Scrulox mounting screws are
included. Use model SC-1 Scrulox driver
to install.
Other Popular Stainless Steel Stations
Amplifier: Use Lee Dan model PK-543A.
Wiring Requirements
IR-464SS
IR-465SS
IR-463SS
4 Wires: 3 Common (twisted) + 1 Selective 22AWG.
5 Wires: 4 Common (twisted) + 1 Selective 22AWG.
3 Wires: 2 Common (twisted) + 1 Selective 22AWG.
Use existing wiring if electrically sound.
800-231-1414 • 631-231-1414
155 Adams Avenue • Hauppauge, NY 11788-3699
Fax 631-231-1498 • www.LEEDAN.com
© 2000-2010 LEE DAN® Communications, Inc.
IR-444SS
Surface Mount
IR-207SS
Stainless Plate
Version of
IR-464SS
Metal Buttons
Fits 2-Gang Box
INTERCOMS • MAILBOXES • DIRECTORIES
NURSE-CALL • ANNUNCIATORS • WIRE & CABLE
With continuous product improvement, specifications are subject to change without notice.
IN-475H (5/10)
Innovations in Communications TM
since 1955
®
‘IR-464SS’ INTERCOM
SPECIFICATIONS
®
ARCHITECTS' & ENGINEERS'
SPECIFICATIONS
Stations: Intercom stations shall be Lee Dan model IR-464SS or approved
equal. Heavy duty 6 amp rated, chrome plated, solid brass, round metal
buttons shall be provided for TALK, LISTEN, and DOOR operations.
Pushbutton connections must be made by positive screw terminals by
circuit board. Pigtail connections are not acceptable. Stations shall be
permanently stamped with TALK/LSTN/DOOR legends for tenant operation. The speaker/microphone shall be a mylar cone high sensitivity type
with voice-frequency response. Paper cone speakers are not acceptable.
Speaker shall be protected by a double metal speaker baffle. Station shall
be constructed of 18 gauge stainless steel. Mounting screws shall be tamper
resistant Scrulox type.
Amplifier: Intercom amplifier shall be Lee Dan model PK-543A or approved
equal. Amplifier shall be powered by a Lee Dan model PS-30A transformer
(16VAC/30VA), or approved equal which shall be UL listed.
“Quantum” Lobby Panel (option 1 of 3): Intercom panel shall be a Lee Dan
vandal-proof QuantumTM series or approved equal. Panel shall be constructed of 16 gauge low-carbon Stainless Steel. Pushbuttons shall be heavy
6 amp rated, chrome plated, solid brass, round metal buttons.
Pushbutton connections must be made by positive screw
terminals by circuit board. Pigtail connections will not be
acceptable. Apartment numbers shall be permanently engraved directly on the surface of the panel. Building address
shall be permanently engraved at the top of the lobby panel.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone. Paper
cone speakers are not acceptable. Speaker shall be protected
by a three (3) layer metal speaker baffle. Intercom panel shall
include an integral alphabetical directory protected by Lexan®
sheet. Speaker, pushbuttons and directory components shall all be field
replaceable. Glued in place components are not acceptable. Mounting
screws shall be tamper resistant Tampruf type. A Lee Dan model SC-T
Tampruf type screw driver shall be provided with each lobby panel for
directory maintenance.
“Van-Guard” Lobby Panel (option 2 of 3): Intercom panel shall
be a Lee Dan vandal resistant Van-GuardTM series or approved equal. Panel shall be constructed of heavy extruded
aluminum with permanently engraved solid aluminum black
anodized plungers. Pushbuttons shall be self-wiping type
with positive screw terminals. Pigtail connections will not be
acceptable. Pushbuttons shall be mounted on a sub-plate
mounted behind the extruded aluminum module(s).
Pushbuttons shall be activated by pressing the solid metal plungers.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone. Paper cone speakers
are not acceptable. Speaker shall be protected by a double metal speaker
baffle. Intercom panel shall include an integral alphabetical directory
protected by Lexan® sheet. Speaker, pushbuttons and directory components
shall all be field replaceable. Glued in place components are not acceptable.
Mounting screws shall be tamper resistant Scrulox type. A Lee Dan model
SC-1 Scrulox type screw driver shall be provided with each lobby panel for
directory maintenance.
Model IR-464SS
APPLICATION
IR-464SS is a durable apartment intercom station
constructed of stainless steel with metal buttons. Ideal
for city housing projects, transient residencies, dormitories, jails, or wherever vandalism may be a concern.
The large 3", 1 Watt speaker provides clear audio
communication and is protected by double metal
speaker baffle.
“Style E” Lobby Panel (option 3 of 3): Intercom panel shall be a Lee Dan
economy Style “E”TM series or approved equal. Panel shall
be constructed of extruded aluminum with
permanently engraved number strips. Panel styles without
engraved apartment numbers shall not be acceptable.
Pushbuttons shall be self-wiping type with positive screw
terminals. Pigtail connections will not be acceptable.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone.
Paper cone speakers are not acceptable. Speaker shall be
protected by an ABS plastic speaker grille. Intercom panel
shall include metal nameholders for tenant identification. Plastic
nameholders shall not be acceptable. Speaker, pushbuttons and grille
components shall all be field replaceable. Glued in place components
are not acceptable. Mounting screws shall be tamper resistant Scrulox
type. A Lee Dan model SC-1 Scrulox type screw driver shall be provided
with each lobby panel for maintenance.
Other Accessories
DO-001 Mortise style electric door strike.
Normally locked type.
IH-101 or Flush back box for concrete and open
IH-101B stud walls.
IH-102 Flush plaster ring for drywall construction.
OH-700 Surface box. Black powder coated steel.
PS-3A UL listed Pigtail transformer. 16VAC 10VA
Lexan® is a registered trademark of General Electric.
800-231-1414 • 631-231-1414
155 Adams Avenue • Hauppauge, NY 11788-3699
Fax 631-231-1498 • www.LEEDAN.com
©2000-2010 LEE DAN® Communications, Inc.
Distributed By:
IN-475H (5/10)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising