Technical Manual

Technical Manual
Technical Manual
Mk4 BATTLE LIGHT
WEAPON MOUNTED WHITE LIGHT LED 500 LUMENS
MAINTENANCE:
• Never use strong cleaners or solvents on housing.
• Use soft towel and soapy water to clean external housing.
• Use damp towel to clean internal battery compartment. Excess moisture
inside battery compartment may damage unit.
• Use alcohol and soft towel to clean front window.
OPTIONAL ACCESSORIES (not included)
• Mk4 Dual Tailcap (Push Button/Remote Cable) - Black (Item # 9161)
• Mk4 Low Profile Offset Mount - Black (Item # 9165)
• 7" Y-Remote cable pressure pad switch. Connects Mk4 Battle Light and OTAL-A,
OTAL-Classic, CQBL-1, DBAL-A2, DBAL-D2, DBAL-I2 (Item # 9145)
STEINER HERITAGE™ WARRANTY
For any reason other than theft or deliberate misuse, we will repair or replace
your Steiner battle light at no charge to you should it become damaged or
defective - no questions asked.
• No warranty card needed
• No receipt required
• Fully transferable – from generation to generation
The Mk4 Weapon-Mounted Tactical Light features a stunning 500 lumen LED
in a sleek, compact package. The Mk4 mounts to any MIL-STD-1913/Picatinny rail
using our low profile thumb screw mount that neatly tucks the light in
between the top and side rails of an M4/M16.
BATTERY INSTALLATION:
1. Install batteries prior to mounting on to weapon.
2. Rotate flashlight head counter clock wise and remove from battery housing.
3. Install batteries in correct orientation as marked on housing.
4. Install flashlight head by turning clock wise onto battery tube.
5. Do not use any tools to turn flashlight head.
MOUNTING TO WEAPON:
1. Ensure weapon is unloaded and magazine is removed prior to mounting unit.
2. Open thumb screw by rotating counter clock wise. Ensure grabber rail is opened.
3. Install unit on to weapon in desired location.
4. Rotate thumb screw clock wise to secure mount on to rail. Ensure unit is
firmly attached to weapon prior to shooting.
SPECIFICATIONS:
• Includes thumb screw mount and pressure pad
• Push-button or remote cable pressure pad activation
• Momentary / Constant On
• Mount: MIL-STD-1913/Picatinny rail
• Type: White Light LED
• Lamp: Light Emitting Diode
• Lumens: 500
• Divergence: 10°
• Range: 300 m
• Weight: 4.9 oz. / 138.91 grams
• Length: 5.98 in. / 15.19 cm
• Diameter: 1.0 in. / 2.54 cm
• Battery: 2 x CR 123A or 1 x 18650 rechargeable
• Battery Life: 1.25 hours or 1.75 hours
• Material: Anodized Aircraft Aluminum 6061-T6,
MIL-SPEC Type III Hardcoat Anodized
• Environment: Waterproof to 5 m
• Warranty: Heritage Warranty™
STEINER-OPTIK
331 East 8th Street • Greeley, CO 80631
Tel: (888) 228-7747 • Fax: (970) 356-8702
Customer Service: laserlightsinfo@steiner-optics.com
steiner-optics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising