3D Instruments Accu-Star Digital Calibrator

3D Instruments Accu-Star Digital Calibrator
Accu-Star
Digital Calibrator
Features
Capability - dual internal pressure sensors
pressure ranges from 0.4 to 10000 psig. Multifunction digital calibrator provides for pressure,
current and voltage measurements
Precise Measurements - 0.025% Full Scale
pressure for most ranges; 0.015% of reading ±
0.002 for current & voltage measurements
Temperature Compensation - pressure
measurement accuracy not de-rated over the
temperature range of 15-35 deg C
Graphic Display - Large graphic style LCD
with backlight. Display can be configured to
display up to 3 inputs simultaneously.
Pressure Switch Test - Pressure switch testing
routine facilitates setting of pressure switches
24 VDC Source - Internal 24 V loop power
supply can power a transmitter under test
Lower Power Consumption - under typical
usage greater than 35 hours battery life from
four (4) standard AA cells
Versatile -13 ranges available with each capable
of displaying up to 15 Engineering Units
Communication - streaming real-time RS-232
data output via special cable (optional)
Options - PT100 RTD Temperature Probe, RS232 cable, External Pressure Module Adapter
and 28 External Pressure Modules
Accu-Star Pictured with Options
Product Description
The Accu-Star multi-function Digital Calibrator from 3D
Instruments incorporates the ultimate in pressure and
temperature measurement technology to address the
calibration requirements of modern process monitoring
and control instrumentation. The Accu-Star calibrator,
with dual on-board sensors, provides unmatched pressure
measurement flexibility over any competitive unit, setting
new standards for accuracy and ease-of-use. The AccuStar measures current to 24 mA and voltage to 30 VDC.
An internal 24 VDC source provides powering capability
for process instruments under test.
Outstanding isolated stainless steel pressure sensors from
0-5 to 0-10,000 psig provide for unmatched accuracy of
0.025% full scale on most ranges!! Non-isolated sensors
extend pressure measurement down to draft pressure of
0.4 psi. To complement these sensors, an optional family
of external pressure modules of varying types are
available...PSIG, PSIA and PSID...extending the AccuStar pressure measurement capabilities. An optional
PT100 RTD probe allows for temperature measurements
accurate to 0.1 deg C.
A large graphic LCD with oversized digits, high contrast
and backlighting provides for superior resolution and
excellent readability…even at a distance or in poor light
or at a bad viewing angle!! The Accu-Star is housed in a
robust ABS case. To reduce maintenance, low power
circuitry provides for greater than 35 hours of battery life
under typical usage from 4 AA batteries.
This high-end multi-function calibrator provides for
numerous user-configurable features such as: Pressure
Switch Test, % Error, Damping (smoothing of data on
LCD) and “real-time” RS-232 communications via an
optional cable.
The combination of sophisticated precision pressure and
temperature measurement technology, robust design, easeof-use, extensive feature set and a wide array of optional
external pressure sensors makes the Accu-Star from 3D
Instruments the ideal choice to tackle your demanding
pressure, temperature, voltage and current test/calibration
applications.
GENERAL SPECIFICATIONS
Accuracies:
- Pressure:
15 psig to 3000 psig:
± 0.025% full scale
5000 psig, 10000 psig: ± 0.035% full scale
± 0.05% full scale
1 psig, 5 psig:
0.4 psig
± 0.1% full scale
- Current:
± 0.015% of reading ± 0.002 mA
- Voltage:
± 0.015% of reading ± 0.002 V
- Temp.:
± 0.015% of reading ± 0.02 ohms
(or ± 0.1 C@0 C for PT100)
Temperature effect:
No effect on accuracy on all functions from 15 C to
35 C. For pressure ranges above 5 psig and
temperatures outside of 15 C-35 C, add ± 0.002%
full scale/ C to readings on all functions. For
pressure ranges 5 psig and below and temperatures
outside of 15-35 deg C range, add 0.005% FS/deg C.
Ranges(psi)/Resolution(psi)/Proof Pressure(psi)
Range
Resolution
Proof Pressure
0-0.4 psig
0.4000
1
0-1 psig
1.0000
5
0-5 psig
5.0000
15
0-15 psig
15.000
30
0-30 psig
30.000
60
0-100 psig
100.00
200
0-300 psig
300.00
600
0-500 psig
500.00
1000
0-1000 psig
1000.00
2000
0-1500 psig
1500.0
3000
0-3000 psig
3000.0
6000
0-5000 psig
5000.0
10000
0-10000 psig
10000.0
15000
Ranges: (Calibrated)
- Pressure: 0-0.4 psig to 0-10,000 psig
- Current: 0 to 24.000 mA
- Voltage: 0 to 30.000 VDC
- Temperature: -40 C to 105 C (-40 F to 220 F)
resolution is 0.1 C (0.2 F)
(optional PT100 temperature probe required)
Over-Range Measurement Capability:
- Pressure:
-2 psig to 120% full scale for
ranges > 1psig
-1.20 to 1.20 for 1 psig range
-0.48 to 0.48 for 0.4 psig range
- Temp.:
-43.0 C - 108.0 C
- Current:
-0.100 - 24.100 mA
- Voltage:
-0.100 - 30.100 VDC
Compensated Temperature:
15 C to 35 C (59 F to 95 F)
Operating Temperature:
-10 C to 50 C (4 F to 122 F)
Storage Temperature:
-20 C to 60 C (-4 F to 140 F)
Operating Media:
For ranges from 5-10,000 psig - all media
compatible with 316SS and Nickel plated brass. For
ranges below 5 psig - clean dry non-corrosive gases
only - compatible with Nickel, Gold plated Kovar,
silicone gel, gold wire, RTC, silicon and glass.
Power Requirements:
6.0 VDC, four (4) standard AA cells
>35 hours life under typical usage
Connectors/Ports:
- Pressure: two (2), 1/8" NPT female
- External Pressure Module/RS-232 Port
- RTD Temperature Probe Port
Physical:
- Dimensions: 8.3" H x 3.9" W x 1.8" D
- Weight: 1lb, 4 oz. (0.567 kg)
Materials of Construction:
- Case and External Pressure Modules ñ ABS
- Pressure Manifold Nickel Plated Brass
for ranges < 10k; 316 SS for 10K range
Engineering Units:*
psi, bar, mBar, kPa, MPa, kg/cm2, cm H2O@4 C,
cm H2O@20 C, in H 2O@4 C, in H 2O@20 C, in
H2O@60 F, mm Hg@0 C, in Hg@0 C, mm
H2O@4 C, mm H 2O@20 C
* -not all units are enabled for all pressure ranges
Auto Shut-Off:
1-30 minutes, user-defined
Temperature Probe: (Optional)
PT-100 ALPHA 385 Class ìAî Specifications
9" sheath length with 3/16" O.D. - 1 foot retractable
cable that expands to 5'
External Pressure Module Adapter: (Optional)
Connects external pressure modules to the AccuStar. Note: required item if ordering external
pressure modules.
External Pressure Modules: (Optional)
**
*
3D P/N
Range
Accuracy(% FS)
525EX-001
0-0.3 psig
0.1% Full Scale
525EX-004
0-1 psig
0.05% FS
525EX-009
0-5 psig
0.05% FS
525EX-011
0-7.2 psig
0.06% FS
525EX-013
0-10 psig
0.05% FS
525EX-021
0-30 psig
0.025% FS
525EX-018
0-50 psig
0.03% FS
525EX-023
0-100 psig
0.025% FS
525EX-024
0-150 psig
0.035% FS
525EX-026
0-300 psig
0.025% FS
525EX-027
0-500 psig
0.025% FS
525EX-029
0-1000 psig
0.025% FS
525EX-031
0-1500 psig
0.035% FS
525EX-033
0-3000 psig
0.05% FS
525EX-035
0-5000 psig
0.05% FS
525EX-038
0-10000 psig 0.1% FS(18-38 C)
52AEX-015
0-15 psia
0.05% FS
52AEX-021
0-30 psia
0.025% FS
52AEX-018
0-50 psia
0.03% FS
52AEX-023
0-100 psia
0.025% FS
52AEX-026
0-300 psia
0.025% FS
52DEX-009
0-5 psid
0.05% FS
52DEX-021
0-30 psid
0.025% FS
52DEX-018
0-50 psid
0.03% FS
521EX-021
-15-0-15 psig 0.05% FS
521EX-048
-15-0-30 psig 0.025% FS
*-Accuracy is FS over the temp. range 15-35 deg C
** -Over-Pressure spec ranges from 120 to 400%
Consult 3D datasheet KT-095 for additional
details on external pressure modules.
ORDERING INFORMATION
PART NUMBER:
Example:
52500-21D33
j
k l m
52500 - XX D YY
Accu-Star Digital Calibrator containing dual pressure sensors 30 PSIG/3000 PSIG
both with 1/8î NPT female process connections. Standard includes with each Accu-Star:
nylon soft-sided carrying case, Test Leads, NIST traceable Calibration Certificate and Manual
j Type of Calibrator :
52500 Accu-Star Pressure Calibrator with dual on-board pressure sensors
k Pressure Ranges Codes : (Use #2 for the lower of the two desired pressure ranges)
01: 0-0.4 PSIG
04: 0-1 PSIG
09: 0-5 PSIG
15: 0-15 PSIG
21: 0-30 PSIG
23: 0-100 PSIG
26: 0-300 PSIG
27: 0-500 PSIG
29: 0-1000 PSIG
31: 0-1500 PSIG
33: 0-3000 PSIG
35: 0-5000 PSIG
38:0-10000 PSIG
l Process connection :
D: 1/8"NPT female
m Pressure Ranges Codes : (Use #4 for the higher of the two desired pressure ranges)
01: 0-0.4 PSIG
04: 0-1 PSIG
09: 0-5 PSIG
15: 0-15 PSIG
21: 0-30 PSIG
23: 0-100 PSIG
26: 0-300 PSIG
27: 0-500 PSIG
29: 0-1000 PSIG
31: 0-1500 PSIG
33: 0-3000 PSIG
35: 0-5000 PSIG
38:0-10000 PSIG
n Option Codes and Accessories :
- PT100 RTD Temperature probe - 3D Part Number: 2132-0001 (outfitted standard with a black hard-sided carrying case)
- RS-232 Cable - 3D Part Number: 2025-0010 (Approximately 4 foot long)
- External Pressure Modules part number provided above. Contact factory or 3D datasheet KT-095 for details on specifications.
- External Pressure Module Adapter - 3D Part Number: 2001-0092. (Note: required when using Accu-Star with External Pressure Modules)
- Handpumps 3 models available: Model 8110 Pneumatic (0-300 psi), Model 8111-300 Duplex (-13-300 psi) and Model 8112-3000 Hydraulic (0- 3000 psi)
3D Instruments, LLC
2900 E. White Star Avenue, Anaheim, California 92806 USA
Phone: (714) 399-9200
Fax: (714) 399-9221
Internet: www.3DInstruments.com E-mail: info@3DInstruments.com
Printed in USA
3D Accu-Star Digital Calibrator
KT-092
1/08
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising