UM diecut20161212
Directions For Use:
BPDV122
Charging (two methods) :
A) Use the built-in rechargeable lithium batter
2.5” HD DASHCAM
Instruction Manual
BPDV122
1) Connect the DashCam to a computer or USB charger with the USB cable.
2) The red indicator light will turn on to indicate the DashCam is charging.
When it is done charging the light will turn off.
Note: When using the DashCam, press the power button to start or stop recording videos.
B) Connect the 12V/24V car charger
1) After staring your car, the DashCam will automatically start recording.
2) The DashCam will stop working after the power is turned off and will
automatically save recording.
When the battery power is low, DashCam screen will display “Electricity Shortage”
Function Introduction
1.
2.
3.
4
5.
6.
7.
8.
B) Camera Mode
Turn on the DashCam and press the “mode” Button to enter the camera mode.
Press the “Record” button to take pictures. Press the menu button to enter the
camera setting menu.
C) Playback Mode
Turn on the DashCam and press the mode button three times to enter playback
mode. Press the up/down button to navigate and select the files you want. Then
press “record” button to play or pause file. Press the “mode” button to return to
previous screen and exit.
D) Delete Function
In playback mode, press the menu button to enter the playback menu. Use the
up/down button to select “Delete”. Then press the “Record” button to enter the
delete menu. Continue using the up/down button to make a selection and the
“Record” button to confirm.
E) Enter the setting Menu in Video Mode
Press the menu button to enter the setting menu. Press up/down to navigate the
different option. Press the “Record” button to select an option. Repeat previous
step to navigate sub-menu and press “Record” button to select. Press the menu
button to return to previous screen and exit.
1 ) Time Stamp: Choose whether or not the date and time is displayed on screen to
change the date/ time: Press the menu button to enter the settings menu and press
again to enter the setup. Press up/down to select “Date Input” and then press the
“Record” button to confirm. Adjust the date/time using the up/down button.
Choose the correct number and press the “record” button to confirm and move
to next selection.
2 ) Motion Detection: Go to video mode settings to turn Motion Detection on/off.
When Motion Detection is turned ON, the DashCam will automatically begin video
recording when movement is detected.
USB Connection
SD Card Slot
Speaker
Mount Socket
Microphone
Battery Cover
Lens
Infrared Lamp
9.
10.
11.
12.
13.
14.
15.
Power Button
Record Button
Display
Menu Button
Down Button
Up Button
Mode Button
DashCam with video/photo/audio playback
When connected to the car charger, the DashCam will automatically enter video
recording mode to start to record. The red indicator light will turn on.
A) Video Mode
• Press the power switch button or connect car charger to turn On DashCam.
The DashCam will automatically turn on in video mode.
• When connected to the car charger, the DashCam will automatically enter video
recording mode and start to record. The red indicator light will turn on.
• To manually begin video recording, press the record button.
• Press the button to stop recording. The red indicator light will turn off.
• Press the record button again to stop recording. The red indicator light will turn off.
NOTE: Please insert an SD card into the SD card slot before use. All recorded files will be
stored on the SD card.
3 ) Recording: Press the button to turn recording on/off.
4 ) Cycled Recording Function: When the SD card is full, the DashCam will
automatically delete the oldest files and overwrite them with new files.
5 ) Formatting: When you select “Yes” all the stored files will be cleared from your
SD card.
6 ) Languages: 12 language total
English, Simplied Chinese, Traditional Chinese, Russian, Spanish, Polish, French,
Korean, Italian, German, Portuguese and Japanese.
.
7 ) Reset System: When you select “Yes” the DashCam will reset and restore
factory settings.
8 ) IR lamp frequency: 50Hz/60Hz
IR lamp has automatic infrared night vision.
Shaghal Ltd. 2231 Colby Ave, Los Angeles, California 90064
Technical Specifications
In The Box:
1) 2.5” Swivel LCD Screen
2) Records 720p Video
3) 0.3MP Camera
4) 1/4 Color CMOS HD Image Sensor
5) Night Vision
6) SD card Slot Support up to 32GB
7) USB Connection
8) High Speed Recording
9) Cycled Recording
10) Power Input: DC5V
11) Rechargeable Battery
12) Built-in Microphone
DashCam
Mounting Bracket
300mAh Lithium Battery
USB Cable
Car Charger
User Manual
Warranty Card
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising