Folleto publicitario 3

Folleto publicitario 3
MMI / PDU
CONTROL PANEL, SAFETY & POWER MANAGEMENT
6TL provides the intelligent building blocks,
the integrator provides the ATE.
When designing a test system that must operate in production
environments, beside the test&measurement tasks, engineers must
MMI
think about how to control the system, how to design the safety functions
•
Platform safety management according to:
EN 60947-5-1 and EN 60204.
•
PT100 temperature inputs with alarm function.
•
System cooling controlled by temperature input.
•
Precision AC voltage, current, phase & frequency
measurement with alarm function.
is reduced to zero. The 6TL MMI module has all these features already
•
Full Color LCD Graphic control display.
build in.
•
Run / down-time counters, non-erasable mem.
•
8 floating bipolar switches for external control.
that would also be desired, but are rarely implemented because of
•
EPO; local and remote.
the high development, engineering and integration time involved (i.e.
•
Direct connection and control over PDU.
Temperature Measure & Cooling Fan Control, Programmable I/O’s,
•
90dB alarm buzzer.
•
Connection for Canbus controlled light tower.
•
Ethernet port for network connection.
•
2 configurable I/O’s, switcable +24V pwr output.
involved in this control, and how to manage or distribute the power.
The purpose of the 6TL MMI module is to cover all these safety, control
and power distribution needs that are needed in any rack based system,
so that the time used to select and implement these common things
(safety relays, EPO, On/Off, Communication with operator, and others,
On top of the basics, 6TL has implemented many additional features
Safety curtain inputs, Control display, Alarm settings, Hour-Counters…)
In direct connection to the 6TL MMI, another useful
module is
the 6TL PDU, featuring 8 CAN bus controlled, switched and monitored
power sockets (Options for different countries), enabling the ATE
designer to remotely control the devices integrated into the rack, as well
as the startup sequence of his valued equipment.
The combination of the 6TL MMI & PDU will provide the ATE designer full
control over his rack based equipment.
www.6TL.es
PDU
•
Controlled startup of instrumentation.
•
70Amax distributed current.
•
Different power socket types available.
•
4-8 sockets depending on socket type.
•
Standard 19” module, 2U height.
•
Connection cable to 6TL MMI included.
•
Remotely controlled.
•
Per socket LED indication to identify switched off or
un-pugged instrument.
Input Voltage (V; Hz)
Electrical Rating
Input Current (A)
Phases
Power Inlet connector
Power Outlet connectors
Power
Protection
Parameter
monitoring
90 - 260 50-50Hz
90...265V; 50...60Hz
15
50
2
3 pole PCB Plug-in
3 pole PCB type Plug-in
3 pole PCB Plug-in
8 x IEC, Schuko, Danish, UK, US
1 switched, 2 unswitched
Controlled with switch
Power Sequencer
No
Automatic, 1ms delay
Filter
Transient Supression
Circuit Breaker
Power
6
10
Yes, differential
Yes
Yes
Yes
Yes, 15A
-
Total Mains (V, I, cos phi)
No
Internal Temp
Yes
No
External Temp
Ready, 2 PT100 inputs
No
Alarm
90dB buzzer, parameter
No
CAN (NI USB-CAN)
CAN (NI USB-CAN)
Remote control
Multidrop / Bus
Driver
Device interface
Control
PDU: Power Distribution Unit
Power Outlet type
Max. current per socket (A)
YAV modules
Remote On/Off
Mains On/Off switch Type
No
Yes
LabVIEW; dll
LabVIEW; dll
320 x 240 Full color LCD
Bi-color indication per each outlet
CAN connection (x4) and 24VDC PSU
No
Yes, Remote Enable
Yes
Selector switch, two position. Key lockable
No
Fan
Ready, 2 connectors, parameter
No
I/O
2 M12 cononectors
No
Control of external devices
8 bi-polar switches
No
1 NC, connection for external
-
EPO
Key for Safety override (Full version)
Light courtain (Full version)
Yes
Ready, available direct connection
-
RTOS
-
Power Management & MMI module - Lite
H73000301
-
Power Management & MMI module - Full
System Mirco Controller
H73000700
-
PDU 8 socket Type B 15A 120VAC (US)
-
H730008BS
PDU 8 socket Type C 8,3A 240VAC (CEI)
-
H730008CS
PDU 8 socket Type F 16A 240VAC (Euro)
-
H730008FS
PDU 8 socket Type G 13A 240VAC (UK)
-
H730008GS
PDU 8 socket Type I 10A 250VAC (AU/China)
-
H730008IS
PDU 8 socket Type K 10A 230VAC (Danish)
-
H730008KS
Other PDU socket options available
www.6TL.es
Solsones, 85 - E-08211- BARCELONA - Phone. +34 937 270 074
Copyright © 2013 - S.A.Sistel - H73001307001
Order Information
Dimensions (mm)
Safety
Functions
ISO 13849
MMI: Control Panel & Safety
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising