User manual | Sanyo OnePak™ Environmental Housing Series INSTRUCTION

Sanyo OnePak™ Environmental Housing Series INSTRUCTION
INSTRUCTION MANUAL
Sanyo OnePak™
Environmental
Housing Series
Integrated Camera/Lens/Environmental Housing Line
About this manual
Before installing and using this unit, please read
this manual carefully. Be sure to keep it available for
later reference.
IMPORTANT SAFEGUARDS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Read Instructions - All the safety and operating instructions should be read
before the unit is operated.
Retain Instructions - The safety and operating instructions should be
retained for future reference.
Heed Warnings - All warnings on the unit and in the operating instructions
should be adhered to.
Follow Instructions - All operating and use instructions should be
followed.
Cleaning - Unplug the unit from the outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
Accessories - Do not place this unit on an unstable stand, tripod, bracket,
or mount. The unit may fall, causing serious injury to a person and serious
damage to the unit. Use only with a stand, tripod, bracket, or mount
recommended by the manufacturer or sold with the product. Any mounting
of the unit should follow the manufacturer's instructions and should use a
mounting accessory recommended by the manufacturer.
An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
Ventilation - Openings in the enclosure, if any, are provided for
ventilation, to ensure reliable operation of the unit, and to protect it from
overheating. These openings must not be blocked or covered. This unit
should not be placed in a built-in installation unless proper ventilation is
provided or the manufacturer's instructions have been adhered to.
Power Sources - This unit should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of
power supply you plan to use, consult your appliance dealer or local power
company. For units intended to operate from battery power or other
sources, refer to the operating instructions.
Grounding or Polarization - This unit may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the
polarized plug.
Alternately, this unit may be equipped with a 3-wire grounding-type plug, a
plug having a third (grounding) pin. This plug will only fit into a
grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type
plug.
Power Cord Protection - Power supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords and plugs, convenience
SAFETY PRECAUTIONS:
This label may appear on the bottom of the unit due to space limitations.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO
NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
receptacles, and the point where they exit from the appliance.
12. Power Lines - An outdoor system should not be located in the vicinity of
overhead power lines or other electric light or power circuits or where it can
fall into such power lines or circuits. When installing an outdoor system,
extreme care should be taken to keep from touching such power lines or
circuits as contact with them might be fatal. U.S.A. models only - refer to the
National Electrical Code Article 820 regarding installation of CATV systems.
13. Overloading - Do not overload outlets and extension cords as this can result
in
a risk of fire or electric shock.
14. Object and Liquid Entry - Never push objects of any kind into this unit
through openings, as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock. Never spill liquid of any kind
on the unit.
15. Servicing - Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
16. Damage Requiring Service - Unplug the unit from the outlet and refer
servicing to qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions, as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance--this indicates a
need for service.
17. Replacement Parts - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
18. Safety Check - Upon completion of any service or repairs to this unit, ask the
service technician to perform safety checks to determine that the unit is in
proper operating condition.
19. Coax Grounding - If an outside cable system is connected to the unit, be sure
the cable system is grounded. U.S.A. models only--Section 810 of the
National Electrical Code, ANSI/NFPA No.70-1981, provides information with
respect to proper grounding of the mount and supporting structure,
grounding of the coax to a discharge unit, size of grounding conductors,
location of
discharge unit, connection to grounding electrodes, and requirements for the
grounding
electrode.
20. Lightning - For added protection of this unit during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the cable system. This will prevent damage to
the unit due to lightning and power line surges.
SECURITE: En raison de limitation de place, cette étiquette peut être
placée sur le dessous de l'appareil.
DANGER: POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION, NE
PAS OUVRIR LE BOÎTIER. IL N'Y A PAS DE PIÈCES
REMPLAÇABLES À L'INTÉRIEUR. POUR TOUTE RÉVISION,
S'ADRESSER À UN TECHNICIEN SPÉCIALISÉ.
The lightning flash with an arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
L'éclair fléché dans un triangle équilatéral, avertit l'utilisateur de la
présence d'une "tension dangereuse" non isolée à l'intérieur de
l'appareil et d'une valeur suffisante pour constituer un risque
d'électrocution.
The exclamation point within an equilateral triangle is intended to
alert the user to presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Le point d'exclamation contenu dans un triangle équilatéral, avertit
l'utilisateur de la présence, dans la documentation qui accompagne
l'appareil, de consignes d'utilisation et de maintenance importantes.
SICHERHEITSVORKEHRUNGEN: Aus Platzgründen kann
diese Warnung auf der Unterseite des Gerätes angebracht sein.
PRECAUCIONES DE SEGURIDAD:
Debido a limitaciones de
espacio, esta etiqueta puede aparecer en la parte inferior de la unidad.
PRECAUCION: PARA REDUCIR EL RIESGO DE CHOQUE
ELÉCTRICO, FAVOR NO ABRIR LA CUBIERTA. ESTE EQUIPO NO
CONSTA DE PIEZAS O PARTES QUE REQUIEREN SERVICIO O
MANTENIMIENTO. PARA REPARACIONES FAVOR REFERIRSE A
UN TÉCNICO CALIFICADO.
VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU VERMEIDEN,
ABDECKUNG NICHT ENTFERNEN. WARTUNGEN ALLER ART
QUALIFIZIERTEM PERSONAL ÜBERLASSEN.
Das Blitzsymbol im gleichseitigen Dreieck soll den Benutzer auf
nicht isolierte "Hochspannung" im Gehäuse aufmerksam machen,
die eventuell stark genug ist, um einen elektrischen Schlag zu
verursachen.
El símbolo representado por un relámpago con punta de flecha
dentro de un triángulo equilátero, se muestra con el objetivo de
alertar al usuario que existen "voltages peligrosos" sin aislamiento,
dentro de la cubierta de la unidad. Dichos voltages pueden ser de
tal magnitud que constituyen un riesgo de choque eléctrico a
personas.
Das Ausrufezeichen im gleichseitigen Dreieck soll den Benutzer
auf wichtige Bedienungs- und Wartungsanleitungen in der dem
Gerät beigefügten Literatur aufmerksam machen.
El símbolo de exclamación dentro de un triángulo equilátero, se
muestra con el objetivo de alertar al ususario de que instrucciones
de operación y mantenimiento importantes acompañan al equipo.
CONTENTS
1
2
3
4
5
1
UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . .3
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . .4
Electrical Specifications . . . . . . . . . . . . . . . . . .4
Mechanical Specifications . . . . . . . . . . . . . . . . .5
Environmental & Safety Specifications . . . . . .5
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . .6
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . .7
UNPACKING
Unpack carefully. This is an electromechanical device and
should be handled carefully.
If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper.
If any items are missing, contact Sanyo.
BE SURE TO REMOVE THE FOAM PACKING
FILLER INSIDE THE HOUSING BEFORE APPLYING
POWER TO THE UNIT.
The shipping carton is the safest container in which the
unit may be transported. Save it for possible future use.
Check to ensure that the following items are included:
2
•
•
•
•
SERVICE
If the unit ever needs repair service or parts, the
customer should contact Sanyo Technical Support
1-(888)-66SANYO.
Feed-through mount.
Housing/camera/lens assembly.
Instruction booklet packet.
Hardware kit.
3
Sanyo OnePak™ Environmental Housing Series
3
DESCRIPTION
Integrated Camera/Lens/Environmental Housing Line
HIGHLIGHTS:
• Integrated Camera, Varifocal Lens, and Cylindrical Environmental Housing Package
• Packages Include Feed-through Wall Mount and 5 ft of Cabling
• Black & White, Color, or Day/Night Models
• 2.8-12 mm, and 5.0-50 mm Lenses
• Indoor and Outdoor Models
• Outdoor Units Include Heater, Blower and Sunshield
• Standard and High Resolution Models Available
• Pre-wired for Plug & Play for Easy Installation
• NEMA 4 and IP65 Weatherproofing Standards
ELECTRICAL SPECIFICATIONS:
Imager: 1/3" Format, Interline Transfer CCD
Video Output: 1.0 V p-p, 75 ohms.
White Balance: VSE-P235X, VSE-P236X, VSE-P245X, VSE-P246X Series: Auto-sensing
Synchronization: Line Lock
HORIZONTAL RESOLUTION, MINIMUM SCENE ILLUMINATION, BLC,
AND
S/N:
Model
Horizontal Resolution
Min Scene Illumination
Back Light Compensation
S/N
VSE-P235x Series
330 TVL
0.5 Lux @ F1.2
Multi Zone
>48 dB
VSE-P236x Series
520 TVL
0.5 Lux @ F1.2
Weighted Multi Zone
>50 dB
VSE-P246x Series
520 TVL
0.6 Lux @ F 1.2 Color Mode
0.03 Lux @ F 1.2 B&W Mode
Weighted Multi Zone
>48 dB
LENS TYPE, RANGE,
AND
APERTURE:
Model
Type
Range
Aperture
VSE-P2xx1 Series
DC Auto Iris
2.8 to 12.0 mm
F1.4 ~ 360
VSE-P2xx2 Series
DC Auto Iris
5.0 to 50 mm
F1.4 ~ 185
VOLTAGE
AND
POWER RATINGS:
Model
Voltage
Power (Indoor Models)
Power (Outdoor Models)
Color
24 VAC, 60 Hz
4.0 W
29 W
Day/Night
24 VAC, 60 Hz
N/A
29 W
CONNECTORS:
Video Out:
Power:
5 ft. (1.5 m) Coaxial Cable with Female BNC Connector
18 AWG, 3 Conductor, 5 ft. (1.5 m) Wiring Harness with Flying Leads
4
MECHANICAL SPECIFICATIONS:
ENVIRONMENTAL & SAFETY SPECIFICATIONS:
Window: 0.12 in (3 mm) thick UV-stabilized polycarbonate
Temperature: At external temperature of –40 °F to 122 °F
(–40 °C to 50 °C) maintains internal temperatures between
–4 °F to 131°F (–20 °C and 55 °C) with heater/blower.
Housing Mounting: Four (4) available 1/4-20 tapped holes.
Only one set of two is required for mounting.
Salt Atmosphere: MIL-STD-810E, Method 509,
Construction: Aluminum cover, aluminum base, aluminum
Procedure 1.
mounting foot, polycarbonate faceplate, glass reinforced
polycarbonate end caps, neoprene gasket, ethylene propylene seal,
Enclosure Protection: IP65, Designed to meet NEMA 4.
and all stainless steel hardware.
Weight (approx):
VSE-P23xx Series Indoor: 5.7 lbs. (2.57 kg)
VSE-P23xx Series Outdoor: 6.5 lbs. (2.97 kg)
VSE-P24xx Series Outdoor: 6.5 lbs. (2.97 kg)
EMC Requirements: FCC Class B
Safety: UL, cUL
Feed-through Mounts:
Max Load: 20 lbs. (9 kg)
Size: Indoor packages 7in.(18cm) Outdoor packages 12in. (30cm)
Approx. Weight 0.9 lbs (0.4 kg)
Housing Finish: Gray
4
PARTS LIST - (LOCATE YOUR PARTICULAR MODEL)
INDOOR COLOR MODELS
Model
Description
Camera
Lens
Housing
Mount
VSE-P2351A
330TVL Color Camera (VCC-3954), 2.8-12mm AI Vari-focal Lens,
3 1/2" x 11" Cylindrical Housing, Feed-thru Wall Mount, Pre-cabled,
24VAC, Indoor
VCC-3954
SVCLCS2812VA
VSE-2200
MTS-2000S
VSE-P2361A
520TVL Color Camera (VCC-6584), 2.8-12mm AI Vari-focal Lens,
3 1/2" x 11" Cylindrical Housing, Feed-thru Wall Mount, Pre-cabled,
24VAC, Indoor
VCC-6584
SVCLCS2812VA
VSE-2200
MTS-2000S
5
OUTDOOR COLOR MODELS
Model
Description
Camera
Lens
Housing
Mount
330TVL Color Camera (VCC-3954), 2.8-12mm AI Vari-focal Lens,
VSE-P2351HBSA 3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
VCC-3954
SVCLCS2812VA
VSE2300HBS
MTS-2000
VSE-P2352HBSA
330TVL Color Camera (VCC-3954), 5.0-50mm AI Vari-focal Lens,
3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
VCC-3954
SVCLCS550VA
VSE2300HBS
MTS-2000
VSE-P2361HBSA
520TVL Color Camera (VCC-6584), 2.8-12mm AI Vari-focal Lens,
3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
VCC-6584
SVCLCS2812VA
VSE2300HBS
MTS-2000
VSE-P2362HBSA
520TVL Color Camera (VCC-6584), 5.0-50mm AI Vari-focal Lens,
3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
VCC-6584
SVCLCS550VA
VSE2300HBS
MTS-2000
Camera
Lens
Housing
Mount
OUTDOOR DAY/NIGHT MODELS
Model
Description
VSE-P2461HBSA
520TVL Day/Night Camera (VCC-4594), 2.8-12mm AI Vari-focal Lens,
VCC-4594
4 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
SVCLCS2812VA
VSE2400HBS
MTS-2000
VSE-P2462HBSA
520TVL Day/Night Camera (VCC-4594), 5.0-50mm AI Vari-focal Lens,
VCC-4594
4 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
SVCLCS550VA
VSE2400HBS
MTS-2000
CALL FACTORY FOR OTHER CONFIGURATIONS.
5
INSTALLATION
Attention: This installation should be made by qualified service
personnel and conform to the National Electrical Code and
applicable local codes.
Wall Mount Instruction Manual and
Housing Instruction Manual.
5.5 Line Power and Video Signal Connection
The external video coax cable is equipped with a BNC
connector to accept video signal. Route and connect video
cable to the BNC connector. The external power cable will
be provided to allow for necessary stripping/preparation by
the installer. For additional information, refer to the
Installation manuals included in the Installation document
packet.
5.1 Operating Voltage
Recommended operating voltage is 24 V AC, 60 Hz.
5.2 Preparing the Unit
Remove the mount and housing assembly from the carton.
5.3 Mount
Prepare and secure the mount to the wall or mounting
surface as described in the Mounts Instruction Manual
included in the installation document packet.
5.6 Camera/Lens Adjustment
The camera and lens come factory configured and ready for
operation. If custom setup is required, refer to the camera
Installation Instructions included in the Instruction Booklet
Packet.
5.4 Housing
Feed the cabling from the housing foot through the mount.
Additional cables such as those used for RS-232 connections
can be fed through the back fittings. Attach the housing to
the mount using the screws and washers provided in the
hardware kit. For additional information, refer to the
5.7 Sunshield
Sunshields are provided with the outdoor packages. Refer to
the Sunshield Installation Manual for information.
6
SANYO INDUSTRIAL VIDEO
HOUSINGS OR INTEGRATED CAMERA/LENS/HOUSING PACKAGES
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s
expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained
by calling the toll-free number listed below.
For product operation, authorized service center referral, service assistance or problem resolution, call
CUSTOMER INFORMATION 1- 800- 421- 5013
Weekdays 8: 30 AM – 5: 00 PM Pacific Time
For accessories and/ or parts, call
PARTS ORDER INFORMATION 1- 800- 726- 9662
Weekdays 8: 30 AM – 5: 00 PM Pacific Time
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA,
EXCLUDING ALL U. S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL
PURCHASER OR END USER. THE ORIGINAL DATED BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED TO
THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher Company warrants this SANYO product against defects in
materials and workmanship for the periods specified below. SFC will repair or replace (at its option) the product or any of its parts which fail
to conform to this warranty. The warranty period commences on the date the product was first purchased or rented at retail.
LABOR
PARTS
3 YEARS
3 YEARS
EXCLUSIONS
This warranty does not cover (A) the adjustment of customer- operated controls as explained in the appropriate model’s instruction manual,
or (B) the repair of any product whose serial number has been altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair.
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to,
any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to
furnished instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line
voltage, fire, flood or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other express warranties and SFC does not assume or authorize any party to assume for it any other obligation
or liability.
SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH REGARD TO THIS PRODUCT (INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS). IN NO EVENT SHALL SFC BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING FROM THE OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE
PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL. SFC’S LIABILITY FOR
ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, ARISING OUT OF OR IN CONNECTION
WITH THE SALE, USE OR OWNERSHIP OF THIS PRODUCT INCLUDING WARRANTOR’S NEGLIGENCE, OR ALLEGED DAMAGED
OR DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.
ATTENTION
For your protection in the event of theft or loss of this product, please fill in the information below for you own personal records.
Model No _____________________________________________ Serial No. __________________________________________
(Located on back or bottom side of unit.)
Date of Purchase ______________________________________ Purchase Price ______________________________________
Where Purchased ___________________________________________________________________________________________
7
Sanyo Fisher Company
Security Video Division
21605 Plummer Street
Chatsworth, CA 91311
Tel: (818) 998-7322
Fax: (818) 717-2716
Technical Support: (888) 66SANYO
100 0007 002 SAN 12/04
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising