hand-held all-in-one electronic warfare threat
HAND-HELD RF TEST SYSTEM
(HRTS)
HAND-HELD ALL-IN-ONE ELECTRONIC WARFARE THREAT
STIMULATOR TEST SET
The HRTS is designed to be an all in one ‘End of Runway’
Go/No Go confidence tester for installed aircraft warning
receiver systems, or used with any RF Antenna Coupler to
stimulate an RF Radar Warning Receiver based system
through a direct connection.
The HRTS transmits threats in ‘Free Space’, and can also
be connected to an antenna coupler for RF threats. This
enables repeatable tests to be performed on individual
antenna quadrants.
The HRTS is a fully programmable hand-held electronic
warning stimulator unit for stimulating/ testing platform
Electronic Warfare (EW) systems. It is a self-contained
battery operated unit that is easily programmed to
produce simple or complex real world threat signals that
installed threat warning systems are programmed to
detect. The HRTS 4.3 inch color screen and edge keys
guide the user quickly and easily through test scenarios.
Test files are stored in a plug-in USB stick that is inserted
into the HRTS. The HRTS also has the capability to
support the use of hardware encrypted USB sticks. The
HRTS software enables users to quickly program threat
parameters using simple on-screen instructions.
leonardodrs.com
HAND-HELD RF TEST SYSTEM (HRTS)
FEATURES
HRTS PRINCIPAL SPECIFICATION
•All in one threat emissions; Radar, Laser, & Missile
RF FREQUENCY RANGE
•Fully programmable .625-18 GHz and 26 to 40 GHz
RF.625 to 18 GHz, resolution 1 MHz
•CW, pulse and staggered pulse threats
Ka-band26 to 40 GHz, resolution 1 MHz
•Programmable UV/IR missile profiles
MODULATION
•Programmable Laser threat profiles
•Fully menu driven system that can be tailored to
different languages
•PC support package for test file generation
•Stimulate any installed RF Threat Warning through an
existing antenna coupler over its entire operating
bandwith
•MOPP4 friendly interface
CW or pulsedPulse width 50 ns to 100us, resolution 50 ns PRI 1us to
1 second, resolution 50 ns Various stagger sequences
can be set around a nominal PRI
ULTRAVIOLET AND INFRARED
Plume and
Hostile Fire
IndicatorUV (solar blind), eye safe class 2 emissions
LASER
CW or pulsedPulse width 50 ns to 100us, resolution 50 ns PRI 1us to
1 second, resolution 50 ns Various stagger sequences
can be set around a nominal PRI
POWER OUTPUT
RF-21 dBm to +24 dBm controllable in 3 dB steps
Ka-band+25dBm to +34 dBm controllable in 3 dB steps
Power
(connector)RF band: up to +12 dBm
External
power out 6V DC at up to 3A
DIMENSIONS
SizeHeight 12.4” (315mm), width 6.6” (168 mm), depth
10.6” (270 mm)
Weight7.05 lbs (3.2kg)
PresentationShipped in plastic Pelicase 20.3” (516mm) x 15.3”
(390mm) x 9” (228mm) with two battery packs,
battery charger unit, battery charger power brick
suitable for US, European or UK power outlets.
INTERNAL POWER
SizeThe HRTS is powered by a clip-on Lithium Ion battery
pack which provides 4 hours of normal use or 2.5 hrs if
powering an RF hood as well. The unit is supplied with
two battery packs and a charger. Remaining battery
capacity is shown on the operators screen.
HRTS AND BATTERY PACK
The information in this data sheet is to the best of our knowledge, accurate as of the date of issue. DRS Technologies, Inc. reserves the right to change this information
without notice. Nothing herein shall be deemed to create any warranty, expressed or implied. Copyright © DRS Technologies, Inc. 2017 All Rights Reserved.
MRD-2016-04-016_Rev01_v2
Leonardo DRS, Land Electronics
100 N Babcock St, Melbourne, FL 32935
Tel: 888 872 1100
leonardodrs.com
marketing@drs.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising