OEM Humidity / Temperature Transmitter with Voltage Output

OEM Humidity / Temperature Transmitter with Voltage Output
EE060
OEM Humidity / Temperature Transmitter
with Voltage Output
EE060 probes are the ideal solution for cost-effective, highly
accurate and reliable measurement of relative humidity and
temperature.
Excellent protection against external influences is ensured
by the combination of completely encapsulated electronics
and the long-term stable HCT01 sensor with E+E proprietary
protective coating. EE060 is available with an integrated
cable or a threaded connector, with wide temperature and
supply voltage ranges and dual 0-1V, 0-5V or 0-10V analog
outputs, for humidity and temperature.
The result of the wide temperature range and the flexible
supply voltage in combination with the excellent long-term
stability is a versatile applicable probe.
Sensor coating
encapsulated
electronics
sealed
solder pads
EE060
Features
Typical Applications
excellent price/performance ratio
very good long term stability
easy installation
well protected against dust and dirt
stables, incubators, hatchers
green houses
humidifiers and dehumidifiers
monitoring of storage rooms
HVAC applications
Technical Data
Measuring values
Relative humidity
Sensor
Working range
Analogue output 0...100% RH
Accuracy at 24V DC, 20°C (68°F)
and 0.2m/s (40 ft/min)
HCT01-00D
0...100% RH
0-10V -1.0 mA < I < 1.0 mA
0-5V -0.2 mA < I < 0.2 mA
0-1V -0.1 mA < I < 0.1 mA
±2.5% RH
L
L
L
Temperature active
Sensor
Pt1000 DIN B
Analogue output -40...60°C (-40...140°F) 0-10V -1.0 mA < I < 1.0 mA
0-5V -0.5 mA < I < 0.5 mA
0-1V -0.1 mA < I < 0.1 mA
Accuracy at 24V DC, 20°C (68°F)±0.3°C (±0.5°F)
L
L
L
Temperature passive
(with 0-1V output and 8-pole connector only)
Output
resistive, 2-wire
Type of T-Sensor
refer to ordering guide
General
Supply voltage
HT1: 3.6...30V DC / HT2: 10...30V DC / HT3: 15...30V DC
Current consumption
typ. 1.5 mA
Electrical connection
cable or M12 connector
Housing
polycarbonate / IP65
EN61326-1
Electromagnetic compatibility 2)
(industrial environment)EN61326-2-3
Working and storage temperature
-40...+60°C (-40...140°F)
1) Analogue output 0-1V is not protected against surge!
52
v1.2 / Modification rights reserved
EE060
Dimensions in mm (inch)
connector version
cable version
99.5 (3.92)
11
106
34 (1.34)
(4)
(0.47)
(1.34)
Ø12
Ø12
101.5
34
(4.17)
M12x1
(0.47)
(0.43)
Connection Diagram
connector version
cable version
Connector 4-pole (M)
1...V+
2...RH-out
3...GND
4...T-out
Connector 8-pole (M)
1...T-passive
2...not connected
3...not connected
4...RH-out
5...T-out
6...GND
7...T-passive
8...V+
6
5
4
8
7
1
3
Supply voltage
HT1: 3.6...30V DC
HT2: 10...30V DC
HT3: 15...30V DC
Supply voltage
HT1: 3.6...30V DC
HT2: 10...30V DC
HT3: 15...30V DC
V+ (white)
-
GND (brown)
V
V
2
RH (green)
T (yellow)
+
-
Ordering Guide
ANALOG
OUTPUT
+
T-SENSOR PASSIVE
(with 0-1V output and 8-pole connector only)
Electrical connection
CABLE LENGTH FILTER
0 - 1V
(1)
none
(x)
connector 4-pole
(PM)
0.5m (1.6ft)
(A)
0 - 5V
(2)
Pt1000 DIN A
(C)
connector 8-pole (forT-Sensor passive)
(PV)
1.5m (4.9ft)
(C)
0 - 10V
(3)
NTC 10k at 25°C
(E)
cable
(PN)
3m (9.8ft)
(E)
with connector
(x)
membrane filter (B)
EE060-HT
Order Example
EE060-HT2xPMxB
EE060-HT1CPVxB
Output:0-5V
T-Sensor passive: none
El. Connection:
connector 4-pole
Cable length:
with connector
Filter:
membrane filter
Output:0-1V
T-Sensor passive: Pt1000 DIN A
El. Connection:
connector 8-pole
Cable length:
with connector
Filter:
membrane filter
Accessories
(For further information, see data sheet „Accessories“)
Female connector 4pol. self assembly M12x1
Female connector 8pol. self assembly M12x1
Connection cable 4pol. M12x1 male-female, shielded, 2m (6.5ft)
Connection cable 4pol. M12x1 male-female, shielded, 5m (16.4ft) Connection cable 4pol. M12x1 male-female, shielded, 10m (32.8ft)
Connection cable 8pol. M12x1-female - free cable end, shielded, 3m (9.8ft) Connection cable 8pol. M12x1-female - free cable end, shielded, 5m (16.4ft) Connection cable 8pol. M12x1-female - free cable end, shielded, 10m (32.8ft) Plastic mounting flange for duct mounting
HA010707
HA010704
HA010816
HA010817
HA010818
HA010323
HA010324
HA010325
HA010202
Support literature
www.epluse.com/EE060
EE060
v1.2 / Modification rights reserved
53
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising