DLS R6A
REFERENCE
SERIES
DLS Svenska AB - Sweden
DLS R6A
PRODUCT SPECIFICATIONS
2-WAY CAR SYSTEM MODEL R6A
6,5” BASS MIDRANGE
UNPRESSED PAPER CONE
25 MM SOFT DOME TWEETER
Specifications valid from 2008-03.
6,5”, 16 cm mid bass element:
Dimensions:
Outer diameter
Magnet diameter
Mounting depth
Mounting hole
Nominal power handling
Maximum power
Nominal impedance, Z
Sensitivity, 1 W / 1m
Frequency response
Fs, resonant frequency
Voice coil diameter
Voice coil height
Voice coil type / former
Voice coil wire
Number of layers
165 mm / 6,5”
100 mm / 4”
76 mm / 3”
140 mm / 5,5”
80 W
120 W
4 ohms
90 dB
50-5000 Hz
61,5 Hz
36 mm / 1,42”
13 mm / 0,5”
Kapton
Copper
2
DC resistance
Voice coil inductance, 1 kHz
Magnet system
BL product, BXL
Suspension compliance, CMS
Mechanical Q factor, QMS
Electrical Q factor, QES
Total Q factor, QTS
Mechanical resistance, RMS
Moving mass, MMS
Equivalent Cas Air load, VAS
Cone / Dome material
Cone suspension
SD - Effective piston area
2,99 ohm
0,23 mH
Ferrite
3,83
724
4,96
0,73
0,64
0,77
9,24 gr.
15,3 liters/0,54 ft3
Unpressed paper
Rubber
122,8 cm2
Voice coil diameter
Voice coil height
Voice coil wire
Magnet system
Magnet size
Dome material
20 mm / 0,79”
2 mm / 0,079”
Copper
Neodymium
28 mm / 1,1”
Silk
25 mm (1”) tweeter element T25:
Dimensions:
Overall size*
For recessed mounting:
Mounting depth
Mounting hole
Nominal power handling
Maximum power
Nominal impedance, Z
Sensitivity, 1 W / 1m
Frequency response
Fs, resonant frequency
43 mm / 1,69”
18 mm / 0,71”
46 mm / 1,81”
50 W
80 W
4 ohms
93 dB
1,5 - 20 kHz
1500 Hz
Filter box drawing:
Art.no: 9-49027C
Signal input
Mid-bass
+
+
+
-
Tweeter
18 μF
1,8 Ω
0,25 mH
12345
12345
1,5 Ω
123456
0,35 mH
123456
123456
8 μF
1,5 Ω
Tweeter level select
Crossover frequency ~ 4500 Hz
2,7 Ω
* size with mounting cup for recessed mounting
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising