DX 1″ Tweeter - loudspeakershop
DX
1″ Tweeter
Type Number: DX25TG05-04
Features:
In this tweeter design, Vifa audio engineers have tried to reinvent
the traditional dome tweeter. Based on the knowledge obtained
from work on the XT series, Vifa's R&D team combined a
traditional dome design with the large surround of the XT. This
results in a tweeter that has a very good dispersion and low
distortion, due to the improved control of the diaphragm.
Driver Highlights: dome tweeter, fabric diaphragm, High
sensitivity, High Dispersion
Specs:
Electrical Data
Nominal impedance
Minimum impedance
Maximum impedance
DC resistance
Voice coil inductance
T-S Parameters
Resonance Frequency
Mechanical Q factor
Electrical Q factor
Total Q factor
Force factor
Mechanical resistance
Moving mass
Suspension compliance
Effective cone diameter
Effective piston area
Equivalent volume
Sensitivity
Zn
Zmin
Zo
Re
Le
4
-19
2.75
--
ohm
ohm
ohm
ohm
mH
fs
Qms
Qes
Qts
Bl
Rms
Mms
Cms
D
Sd
Vas
650
4.32
0.79
0.67
2.2
0.47
0.42
--7
-93.5
Hz
Tm
Kg/s
g
mm/N
cm
2
cm
ltrs
dB
Power handling
Long-term Max System Power
(IEC)
Short Term Max power
Voice Coil and Magnet Parameters
Voice coil diameter
Voice coil height
Voice coil layers
Height of the gap
Flux density of gap
Total useful flux
Diameter of magnet
Height of magnet
Weight of magnet
--
W
--
W
25
--2
------
mm
mm
mm
mWb
mWb
mm
mm
Kg
Frequency:
Mechanical Dimensions:
Tymphany™ and Peerless v-line™ are trademarks of Tymphany Corporation. © 2006, Tymphany Corporation. All rights reserved.
081406
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising