Peltor Motorsports

Peltor Motorsports
Peltor Motorsports
Champions choice
BSI-approved helmets
Helmets approved according to BSI (BS6658-85 type A/FR red). Manufactured of Tricomp (a composite of fibreglass, polyaramide and carbon fibre) with an interior of fireproof Nomex. Built-in hearing protector cups that attenuate ambient noise, which
improves communication and comfort. Can be ordered with the Peltor communication set, with quick-adjusting, ambient
noise-compensated microphones.
G78* GR
PELTOR PERFORMANCE G78* GR
Colour: Grey; Weight: 1000 g (with hearing protector cups)
Size: S (55–56), M (57–58), L (59–60), XL (61–62)
Art. no. with communication set and HANS, G78*-D-H GR
Art. no. without communication set with HANS, G78*-H GR
Peltor Performance – The new professional rally helmet
Peltor Performance is an ultra light professional rally helmet. Weighing in at only 1000 g + - 50 g, (including HANS anchors,
excluding communication set), it represents a milestone in the development of rally helmets. With its low weight, it reduces
the strain on the driver’s neck muscles.
Manufactured of Tricomp (a composite of fibreglass, polyaramide and carbon fibre) with an interior of fireproof Nomex.
Built-in hearing protector cups that attenuate ambient noise, which improves communication and comfort.
Peltor Performance is BSI approved and available with HANS post anchors and Peltor´s high quality communication set.
This is truly the new generation of rally helmets. And it’s Peltor leading the field again.
PELTOR PERFORMANCE G78* VI
Colour: White; Weight: 1000 g (with hearing protector cups)
Size: S (55–56), M (57–58), L (59–60), XL (61–62)
Art. no. with communication set and HANS, G78*-D-H VI
Art. no. without communication set with HANS, G78*-H VI
Art. no. without communication and HANS, G78* VI
Art. no. with communication set without HANS, G78*-D VI
PELTOR G90* VI Formula
Colour: White; Weight: 1,500 g
(with hearing protector cups)
3-mm adjustable, lockable visor
Size: S (55–56), M (57–58), L (59–60), XL (61–62)
Art. no. with communication set and HANS, G90*-D-H VI.
Art. no. without communication set, with HANS G90*-H VI.
Head and Neck Support (HANS)-approved
Snell approved
SIS-approved helmets
Helmets approved by the Swedish Auto Sport Federation (SBF), manufactured of Tricomp (a composite of fibreglass, polyaramide and carbon fibre) for minimum weight and maximum protection. Interior of fireproof Nomex and built-in hearing protector
cups that attenuate ambient noise, which improves communication and comfort. Can be ordered with the Peltor communication set, with quick-adjusting, ambient noise-compensated microphones.
Go-cart and Formula
PELTOR G10*-02 VI
Colour: White; Weight: 1100 g (with hearing protector cups)
Size: XXS (51–52), XS (53–54), S (55–56), M (57–58),
L (59–60), XL (61–62)
Art. no. without communication set G10*-02 VI
Boat, snowmobile and rescue
Signal red boat helmet for action at sea. Approved under E-2204 and
E-2205, manufactured of Tricomp (a composite of fibreglass, polyaramide
and carbon fibre) for minimum weight and maximum protection. Extra waterproof interior and built-in hearing protector cups that attenuate ambient
noise, which improves communication and comfort. Can be ordered with
the Peltor communication set, with quick-adjusting, ambient noise-compensated microphones.
G7*-02 RC
Colour: Signal red; Weight: 1,200 g
(1,400 g complete with communication set)
Size: S (55–56), M (57–58),
L (59–60), XL (61–62)
Art. no. with communication set G7*-02-D RC.
Rally and Racing
PELTOR G6* VI
Colour: White; Weight: 800 g (with hearing protector cups)
Size: S (55–56), M (57–58), L (59–60), XL (61–62)
Art. no. with communication set G6*-D VI.
Art. no. without communication set G6* VI
Helmet accessories
Visors for G10
Standard
VT21A V02 VT21B VT21B-01 VT21B-02 VT207 Helmet case VT612
Padded helmet case.
Black with embroidered
Peltor logo
Smoke
Clear
Antifog (Clear)
Tear-off (Clear)
Visibility/set of 5
Touring visor for G6,
G7 and G78*
VT35 SV
Iridium
VT21C
VT21C
VT21C
VT21C
VT21C
V02
GO
SI
RD
BL
Multicolour mirror
Gold mirror
Silver mirror
Red mirror
Blue mirror
Visor decal for G10 and G90
FP8178
FP8179
G10
G90
Visors for G90 (Tear-off)
VT28A-01 VT28B-01 VT207 Smoke
Clear
Visibility/set of 5
Unlimited two-way communication
The Peltor Lite-Com III comes in two licence-free* basic models: The LPD 433 communicates on 69 channels on the 433–
434 MHz band. With 10 mW output effect, it has a range of up to a kilometre. The PMR 466 communicates on 8 channels on
the 446 MHz band. With two output levels, 25 and 150 mW, it has a range of up to two kilometres at the highest power. You
can communicate with other Lite-Com headsets and com radios on the same frequency and can use an adapter to connect a
mobile phone or external com radio, regardless of the frequency.
Mechanic
Can hear communication in the pit via a portable com radio. A ’listenonly’ headset is connected to this for the best possible sound quality
and noise attenuation.
HTM79A, PMR06
The standard headset can be connected to
various com radio units with adapters
With their painstakingly designed microphone and earphone system and
excellent attenuation, this series of headsets provides unique acoustic
properties and superb communication in extremely noisy environments.
Peltor’s proven, rugged design solutions guarantee extreme comfort and
offer long durability even when used in tough conditions.
Team Co-ordinator
Uses the Lite-Com III for communication in the pit and an external
communication radio connected with an adapter cord. Takes care
of all pit activities via the Lite-Com III and when necessary conveys
information to the driver on the higher-powered external equipment,
which has a wider range.
Lite-Com III, AL3CX-T0268
The standard headset* can be connected to different com radio units
with adapters*.
Headsets* with direct connection
to various com radio units.
Built-in PTT (push to talk) button
on the left ear cup.
Driver
(In this example, a Motorola GP340 is used. Not sold by Peltor.)
Engineer
Uses only the Lite-Com III and keeps in touch with everyone in the team
with compatible equipment or com radios on the same frequency.
Lite-Com III
* For more information, see accessories on pg. 7
With the Peltor communication set in his helmet, he can connect a
com radio to the Y cord* or a mobile station using an adapter cord*.
Communicates with the pit using an external PTT button, which can
be placed within easy reach. In this example, the driver only has contact with the Team Co-ordinator to prevent unnecessary radio traffic
from the pit.
G90*-D-H VI, FL9MC-01, TK52
(In this example, a Motorola GP340 is used.
Not sold by Peltor.)
Peltor FMT200 Rally Intercom
The Peltor FMT200 Rally Intercom is the result of over 20 years’ experience in rally competition and close collaboration with
several world-leading rally teams. It was designed to minimise interfering noise from other electronics in the car and maximise
audibility and communication ability in the extreme environment of a rally car. The Peltor FMT200 can also be connected to a
communication radio, GSM telephone or an audio output signal for video.
FMT200 Display
FMT200 Product Description
1) On/Off key
2) Separate volume regulation for the driver and navigator
3) VOX function, which can be used during inter-stage routes and
to minimise noise in the system.
4) Stage/Road key. In Road mode (inter-stage) it allows full communication via a GSM telephone and a com radio, and in Stage
mode (special stage) it closes to external communication and
reduces the driver’s microphone level by 10 dB.
FMT200 Connections
5) Volume and VOX level LED
6) Aluminium box with a front and back of jointed plastic to
minimise electronic interference.
7) Power supply by 9-V battery or connection to the car battery
(cord included)
8) Signal adjuster for GSM telephones and com radios
9) Jacks (9-pin) for GSM telephones and com radios
10) Output for audio signal for video
11) Headset/helmet jack
FMT110
Peltor’s classic intercom amplifier. The FMT110 provides a full-duplex
connection with a special frequency filter for extra high sound quality.
Splash-protected design with cables heavily shielded with heat-resistant
polyurethane. Power supply from a 9-V battery (10–20 hours operating
time) or from the car’s 12-V system using an FC15 battery eliminator.
The driver mike sensitivity is set at 10 dB lower than the navigator’s to
give the navigator priority. This feature can be disconnected in the amp.
FC15
Battery eliminator, used if the FMT110 amplifier is connected to the car’s 12-V battery.
FL9MQ
Adapter box for connection to mobile phone or communication radio.
* For more information, see accessories on pg. 11
Standard headset
Headset with direct connection
Standard headset
MT7H79A 78-VI Headset with headband, white
MT7H79A
Headset with headband, black
MT7H79B
Headset with neck band, black
Headset with direct connection
MT53H79*-21
MT53H79*-31
MT53H79*-32
MT53H79*-35
MT53H79*-36
MT53H79A-T5139
Motorola GP300
Icom and others, straight connector
Motorola GP340
Icom and others, angled connector
Kenwood TK3101, TK260/270/360/370
ICOM F31/F41, F51/F61
Lite-Com III
Lite-Com III
FL50** Adapter
MT53H7A430B Lite-Com III with LPD (69 ch, 433 Mhz)
MT53H7A440B Lite-Com III PMR (8 ch, 443 Mhz)
FL50** Adapters
FL5010
FL5034
FL5044
FL5035
FL5017
FL5019
FL5030
FL5214
Icom, Zodiac, Maxon and others
Icom angled connector
Icom IC F31/F41, F51/F61
Kenwood TK3101, TK260/270/360/370
Motorola Visar
Motorola Expo
Motorola GP340
Motorola GP300
Other safety equipment
Peltor NEXT earplug
Art no. PN-01-001 (200 pairs)
Earband
Art no. EB-01-000
Peltor ”KID”
Art no: H510AK-442-GB
Art no: H510AK-442-RE
Safety glasses
10
FUEL
Brutally tough. Fuel High-Performance
safety glasses are made of high-density nylon material for impact, torsion and extreme
heat resistance.
Metaliks Sport
Hypoallergenic metal frames with saddle
type nosepiece, adjustable in height for
perfect fitting. De-centered Polycarbonate
twin lens, strongly curved for superior eye
coverage and optimal field of vision.
Force 3
Includes 3 sets of interchangeable gasket
lenses for ultimate versatility. Composite
coated lenses for scratch resistance and
unyielding UV protection. Sleek, stylish
frames with Torsion-lock® temples. Aforce® engineered lenses for extreme safety.
Complete with soft microfiber storage bag
and lanyard. Meets ANSI Z87.1 Industrial
safety requirements
FUEL Art. nr
71502-00001CP
71502-00002CP
71502-00003CP
71502-00004CP
Metaliks Sport Art. nr
71461-00001CP Clear
71461-00002CP Yellow
71461-00003CP Blue mirror
Force 3 Art. nr
71502-10000C
Indoor/Outdoor
Blue mirror
Red mirror
Bronce
Indoor/Outdoor, Blue mirror,
Red mirror
Lite-Com III cords
AL3H-T0268
AL3BT-T0268
AL3CX-T0268
AL3H-01-T0268
TA950869A-T0268
FL6CS
FL6CT
FMT200 cords
Icom, Zodiac, Maxon etc
Motorola GP300
Motorola GP340
Icom angled connector
Motorola Visar
Mobile phone 2.5 mm
Walkman 3.5 mm
Y cords for communication radio
FL9MA-01
FL9MB-01
FL9MC-01
FL9ME-01
TK52
Kenwood TK3101, TK260/270/360/370
Icom, Zodiac, Maxon etc.
Motorola GP300, GP340 via Motorola adapter
Zodiac Small-Talk
Speech button, Velcro attachment, 2 m Y22
Mobile phone station adapter
FL9EH
FL9EJ
FL9-T9118
TK52
*Switching required
Motorola GM350/950 adapter, without PTT
Motorola GM900 adapter, without PTT,
int/ext connector
IC F310*/410* mobile station, modular
Speech button, Velcro attachment, 2 m Y22
for some Icom mobile stations
FL4E
FL4F
FL4-T0277
FL4-T0283
FL4-T0283A
FL4-T0292
J119-01
*Switching required
Icom IC-F hand-held com radio
Mobile phone 2.5 mm
Icom IC F310*/410* mobile station, modular
Kenwood mobile station, 6-pole modular
Kenwood mobile station, 8-pole modular
Motorola GM350, GM340
D-sub contact GSM/com radio
for some Icom mobile stations
Communication set for racing,
rallycross etc.
MT9
TAMT01
ML1A-T0261
Throat mike
Gooseneck mike J22
Branching cord for the MT9, TAMT01
and stereo earphone
Adapter cord for mobile phone
FL6-08
Adapter cord/mobile telephone
Fits all mobile phones with a 2.5-mm, 3-pole jack for a portable
handsfree kit.
Compatible with headsets like the MT7H79A 78-VI.
MT63 and MT632 communication sets
• Easy to adapt to most helmets
• Ambient noise-compensated, fast-adjusting mike for optimal positioning
(3–5 mm from the lips).
MT63
MT632
Hygiene kits
Hygiene kit – HY79
Easy-to-replace hygiene kit for headsets, consisting of two attenuation cushions, two foam rings
and snap-in ear cushions.
Hygiene kit – HY63-01
Easy-to-replace hygiene kit for helmets with hearing protector cups,
consisting of two attenuation cushions and snap-in ear cushions.
Clean single-use protectors – HY100A
A single-use protector that is easy to apply to the
earcushions.
Packages of 100 pairs.
Mike Protector, protective tape – HYM1000
Single-use microphone protectors. Moisture and wind-tight,
hygienic.
Package of 5 metres, approx. 50 replacements.
11
Aearo Ltd. First Avenue, Poynton, Stockport, Cheshire, SK12 1FJ, England
t: +44 (0) 1625 878320 f:+44 (0) 1625 877348 e: ukinfo@aearo.co.uk
t: 900 99 44 80 f: 900 99 44 79 e: ukinfo@aearo.com (Spain)
Aearo LPE SA, 300 Rue Marcel Paul, 94500 Champigny-sur-Marne, France
t: +33 (0) 148 85 20 88 f: +33 (0) 148 85 39 43 e: frinfo@aearo.fr
Aearo GmbH, Ottostraße 1, D - 76275 Ettlingen, Germany
t: +49 (0)7243-7611-0, f: +49 (0)7243-7611-18 e: deinfo@aearo.de
Aearo Srl.,Via Boccaccio 37, 20090 Trezzano, S/N (MI), Italy
t: +39 (0) 2 48 40 26 25 f: +39 (0) 2 48 40 26 16 e: itinfo@aearo.it
12
DB1R-GB Marketing Communication
Peltor AB, Box 2341, SE-331 02 Värnamo, Sweden
t: +46 (0) 370 65 65 65 f: +46 (0) 370 65 65 99 e: info@peltor.se
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising