IIS-35-I - IOTA Engineering

IIS-35-I - IOTA Engineering
IIS-35-I
PRODUCT SPECIFICATION SHEET
MODEL NO:
TYPE:
PROJECT:
COMMENTS:
Load Capability:
35 Watts
Full Light Output for:
LED
Fluorescent
Incandescent
DESCRIPTION
SPECIFICATIONS
Input Voltage ................................................................................... (Dual) 120/277V, 60Hz
Input Rating (bulk)................................................................................................... 44 Watts
Output Voltage ................................................... (Slide switch selectable) 120/277V, 60Hz
Output Power ....................................................... 35 Watts (@ .9 leading to .9 lagging PF)
Lamps Operated.................................... LED (per NEMA 410), Fluorescent, Incandescent
Emergency Operation ....................................................................................... 90 minutes
Load Power Factor Range ............................................................. .9 leading to .9 lagging
Operating Temp................................................................................................... 0° to 50° C
Battery.................................................. Hi-temp rechargeable, replaceable nickel-cadmium
Weight....................................................................................................................... 6.5 lbs.
Approval......................................................................... UL 924 Listed for US and Canada
CSA C22 No. 141 Unit Equipment for Emergency Lighting
Damp Location Rated
RoHS Compliant
Features:
UL 924 Listed
cUL Listed to CSA C22 No. 141
Pure sine wave output
Operates LED, incandescent, and fluorescent
fixtures, fixtures with dimmable ballasts, and
screw-base lamp types
For use with switched or unswitched fixtures
Dual voltage 120/277 VAC 60Hz input
with 120/277 VAC 60Hz slide switch
selectable output
Includes test switch and charge indicator
accessory kit
Replaceable and recyclable long-life
high temperature nickel-cadmium battery
Line voltage allows for remote mounting
of emergency fixtures at distances up
to 250 feet
Low Battery Voltage Disconnect (LVD)
Rated for use in damp locations
Meets or exceeds all National Electrical Code
and Life Safety Code Emergency Lighting
Requirements
Galvanized steel enclosure with 36″ conduit for
wiring connections to the fixture
RoHS Compliant
Five-Year Warranty
DIMENSIONS
17.77″ x 3.0″ x 2.75″ (mounting center 17.25″)
TEST ACCESSORY
FACE PLATE
FLEXIBLE CONDUIT (36”)
HEIGHT
(4.4”)
LENGTH (17.77”)
HEIGHT
(2.75”)
WIDTH
(2.75”)
MOUNTING CENTER (17.25”)
WIDTH (3.0”)
IOTA REV 120716
IOTA ENGINEERING PO BOX 11846 TUCSON, AZ 85734
TEL: 1-800-866-IOTA (4682) FAX: (520) 741-2837 WEB: www.iotaengineering.com
IIS INVERTERS
The IOTA IIS-35-I is a UL Listed sine wave output inverter designed to provide power
to the designated emergency lighting fixture. In a power loss situation, the IOTA
IIS-35-I will supply 120 or 277 VAC power to operate up to a 35W total connected
load for not less than 90 minutes. The IOTA IIS-35-I works in conjunction with
LED, fluorescent, and incandescent lamp and fixture types and will automatically run switched, normally-on, or normally-off designated emergency fixtures. The
IIS-35-I is ideal for applications requiring an emergency source in elevated ceilings,
for high output luminaires, and lamp types utilizing Edison screw (ES) designs. The
IIS-35-I features a replaceable long-life nickel-cadmium battery and is covered under
IOTA’s five-year warranty.
IIS-35-I
35W MICRO-INVERTER UNIT
IIS-35-I SAMPLE SPECIFICATION
Emergency lighting shall be provided by micro-inverter equipment designed to
operate a designated incandescent, fluorescent or LED fixture on emergency
power at the full nominal lumen rating during the full 90-minute emergency
discharge cycle. System output will be rated at 35 watts for 90 minutes. The
system’s voltage rating shall be field selectable 120 or 277 VAC input and 120 or
277 VAC selectable output via two-position slide switch.
MODELS
IIS-35-I
The micro-inverter unit shall allow for the connected emergency fixture to be
normally on, normally off, switched or dimmed without affecting lamp operation
during a power failure. Upon utility power loss, the micro-inverter unit shall deliver
100% of its full rated output regardless of the local switch or dimmer position,
and will provide power to the emergency fixture at distances of up to 250 feet.
COMPONENTS
High-efficiency pure sine wave inverter
The housing shall be designed for installation onto or adjacent to the fixture and
manufactured using a galvanized steel enclosure.
Hi-temp replaceable nickel-cadmium battery
Solid-state indicator light and single-pole test switch
w/ white mounting faceplate
The unit’s electronics shall include inverter circuitry with a fully automatic battery
charging circuit, low battery voltage disconnect, short circuit and brownout
protection as standard. The unit shall utilize a rechargeable and replaceable hightemperature nickel-cadmium battery with a 10-year design life. The inverter system
shall be UL 924 Listed and labeled for use in the United States and Canada. The
unit shall be covered under a full 5-year warranty on the electronics and battery.
It shall meet or exceed the requirements of UL 924, NFPA 101 Life Safety Code,
NFPA 70 National Electrical Code, NEMA 410, OSHA and State and Local codes.
CONSTRUCTION
Galvanized steel housing
36″ flexible conduit
The micro-inverter unit shall be IOTA model IIS-35-I.
TYPICAL WIRING
WHT/BLK
WHT/BLK
UNIT CONNECTOR
RED (POS)
CHARGE INDICATOR
WHT/RED
ORG (277V)
IIS MICRO-INVERTER
BLK (120V)
NEUTRAL
WHT
WALL
SWITCH
WHT/BLU
36-INCH FLEXIBLE
CONDUIT
TEST
SWITCH
BLK/ORG
UNSWITCHED LINE
VIOLET/YELLOW (TO AC DRIVER/BALLAST HOT)
GRAY (TO AC DRIVER/BALLAST NEUTRAL)
GREEN
GROUND
AC
FIXTURE
ACCESSORIES (ordered as separate item)
TBMK T-Grid Mounting Kit
SK - Strap Kit
Use the TBMK mounting kit
to remote mount the IIS unit
within a grid ceiling. The IIS
unit is secured to the bars of
the TBMK via mounting clips.
The bars then mount to the
T-bars of the ceiling grid. The
flexible conduit of the IIS unit
connects to the fixture.
The SK strap kit provides (2)
straps that run through the
mounting tabs of the unit for
securing to a beam or column
near the fixture. Overall strap
length is 18”. Multiple strap kits
can be used in conjunction with
each other for larger diameter
requirements.
Ceiling
Grid
IIS-35-I
TBMK
Bar
Mounting
Clips
IIS-35-I
Straps
IOTA REV 120716
IOTA ENGINEERING PO BOX 11846 TUCSON, AZ 85734
TEL: 1-800-866-IOTA (4682) FAX: (520) 741-2837 WEB: www.iotaengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising