high capacity forklift trucks

high capacity forklift trucks
STRONG PARTNERS.
TOUGH TRUCKS.
TM
HIGH CAPACITY
FORKLIFT TRUCKS
H8-12XM-6, H13-16XM-6
STAGE IIIB
8 000 – 16 000 kg @ 600mm
ADDITIONAL DATA
PERFORMANCE DATA
DIMENSIONS
TYRES & CHASSIS
WEIGHTS
DISTINGUISHING MARKS
H8-16XM-6
HYSTER
HYSTER
HYSTER
H8XM-6
H9XM-6
H10XMS-6
Diesel
Diesel
Diesel
Seat
Seat
Seat
Q (kg)
8000
9000
10000
Load centre distance
c (mm)
600
600
600
Load distance, centre of drive axle to fork
x (mm)
785
785
819
Wheelbase
y (mm)
2700
2700
2700
1.1
Manufacturer
1.2
Manufacturer’s type designation
1.3
Drive: electric (battery or mains), diesel, petrol, LPG
1.4
Operator type: hand, pedestrian, standing, seated, order-picker
1.5
Rated capacity/rated load
1.6
1.8
1.9
2.1
Service weight ‘
2.2
Axle loading, laden front/rear ‘
kg
19132
1881
20585
1720
23144
2107
2.3
Axle loading, unladen front/rear ‘
kg
6304
6109
6288
6460
7943
7344
3.1
Tyres: L=pneumatic, V=solid, SE=pneumatic-shaped solid
3.2
Tyre size, front
12413
12748
15287
L
L
L
9.00-20 14PR
9.00-20 14PR
10.00-20 16PR
3.3
Tyre size, rear
3.5
Number of wheels, front / rear (x = driven wheels)
9.00-20 14PR
9.00-20 14PR
3.6
Track track, front
b10 (mm)
2190
2190
2190
3.7
Track track, rear
b11 (mm)
1930
1930
1930
Degrees
4X
2
10.00-20 16PR
4X
2
4X
2
4.1
Tilt of mast/fork carrige, forward / backward 4.2
Height, mast lowered
h1 (mm)
4.3
Free lift ¶
h2 (mm)
0
0
0
4.4
Lift ¶
h3 (mm)
5339
5339
5346
4.5
Height of mast, extended 
h4 (mm)
6822
6822
7118
4.7
Height of overhead guard (cabin) ■
h6 (mm)
3015
3015
3035
4.8
Seat height/stand height }
h7 (mm)
1742
1742
1762
4.12
Coupling height
h8 (mm)
635
635
655
4.17
Overhang
l5 (mm)
809
809
809
4.19
Overall length
l1 (mm)
5514
5514
5548
4.20
Length to face of forks
l2 (mm)
4294
4294
4328
4.21
Overall width
b2 (mm)
2425
2425
2448
4.22
Fork dimensions
65/200/1220
65/200/1220
75/200/1220
4.23
Fork carrige ISO 2328, class/type A, B
75 mm pin type
75 mm pin type
75 mm pin type
4.24
Fork carriage width ●
b3 (mm)
2350
2350
2350
4.25
Distance between fork-arms
b5 (mm)
520 - 2230
520 - 2230
520 - 2230
15
12
15
4155
s/e/l (mm)
12
15
4155
12
4455
4.30
Reach, lateral from vehicle centerline ✓
b8 (mm)
150
150
150
4.31
Ground clearance, laden, below mast ✓
m1 (mm)
248
248
225
4.32
Ground clearance, centre of wheelbase
m2 (mm)
274
274
292
4.34.1
Aisle width with pallets 1 200 long x 1 200 crossways ‹
Ast (mm)
6099
6099
6133
4.35
Turning radius (outer)
Wa (mm)
3914
3914
3914
4.36
Internal turning radius
b13 (mm)
1433
1433
1432
5.1
Travel speed, laden / unladen Stage IIIA engine
km/h
30.2
31
30.2
31
30.6
5.1
Travel speed, laden / unladen Stage IIIB engine
km/h
30.2
31
30.2
31
30.6
31.2
5.2
Lifting speed, laden /unladen Stage IIIA engine
m/sec
0.47
0.51
0.47
0.51
0.36
0.39
31.2
5.2
Lifting speed, laden / unladen Stage IIIB engine
m/sec
0.47
0.51
0.47
0.51
0.37
0.39
5.2.1
Lifting speed, laden / unladen (120 ccm) Stage IIIA engine †
m/sec
0.55
0.69
0.55
0.69
0.42
0.52
5.2.1
Lifting speed, laden / unladen (120 ccm) Stage IIIB engine †
m/sec
0.57
0.69
0.57
0.69
0.44
0.52
5.3
Lowering speed, laden / unladen Stage IIIA engine
m/sec
0.5
0.48
0.5
0.48
0.5
0.48
5.3
Lowering speed, laden / unladen Stage IIIB engine
m/sec
0.5
0.48
0.5
0.48
0.5
0.48
5.5
Drawbar pull, laden / unladen Stage IIIA engine
kN
104.6
36
104.4
36.5
99.8
41.4
5.5
Drawbar pull, laden / unladen Stage IIIB engine
kN
104.6
36
104.4
36.5
99.8
41.4
5.7
Gradeability, laden / unladen @ 1.6 km/h km/hr - Stage IIIA engine †
%
63
32
57
31
46
31
5.7
Gradeability, laden / unladen @ 1.6 km/h km/hr - Stage IIIB engine †
%
63
32
57
31
46
31
5.9
Acceleration time, laden / unladen Stage IIIA engine
s
5.5
4.7
5.6
4.8
6.2
5.3
5.9
Acceleration time, laden / unladen Stage IIIB engine
s
5.3
4.6
5.4
4.7
6
5.1
5.10
Service brake
10.1
Operating pressure for attachments
10.2
Oil volume for attachments
10.3
Hydraulic oil tank capacity
10.4
Fuel tank, capacity
10.5
Steering design
10.6
Number of steering rotation
10.7
Sound pressure level at the driver’s seat
dB(A)
10.7.1
Sound power level during the workcycle
dB(A)
10.8
Towing coupling, type DIN
oil-immersed / wet disc
oil-immersed / wet disc
oil-immersed / wet disc
bar
193
193
193
l/min
100
100
100
l
100
100
100
l
128
128
128
hydrostatic
hydrostatic
hydrostatic
3.7
3.7
3.7
73
73
73
108
108
107
yes / Pin
yes / Pin
yes / Pin
Specification data is based on VDI 2198
EQUIPMENT AND WEIGHT:
Weights and axle loadings (lines 2.1, 2.2, 2.3) are
based on the following specifications:
16
H8-9XM-6: Complete truck with fully equipped cab,
with 5336 mm BOF (5401 mm TOF) 2-stage lfl mast,
2350 mm wide Integral Sideshift carriage and 1220
mm long forks.
H10-12XM-6: Complete truck with fully equipped cab,
with 5336 mm BOF (5411 mm TOF) 2-stage lfl mast,
2350 mm wide Integral Sideshift carriage and 1220
mm long forks.
HYSTER
HYSTER
HYSTER
HYSTER
1.1
H10XM-6
H12XM-6
H13XM-6
H14XM-6
H16XM-6
1.2
Diesel
Diesel
Diesel
Diesel
Diesel
1.3
Seat
Seat
Seat
Seat
Seat
1.4
10000
12000
13000
14000
16000
1.5
600
600
600
600
600
1.6
819
819
896
896
896
1.8
2700
2900
3300
3300
3300
1.9
16034
18429
19064
20119
2.1
2336
25706
2301
29391
2121
30768
2336
33613
2517
2.2
7969
7211
7875
8159
10376
8053
10364
8700
10343
9776
2.3
L
L
L
L
3.1
10.00-20 16PR
12.00-20 16PR
12.00-20 16PR
12.00-20 16PR
3.2
10.00-20 16PR
10.00-20 16PR
12.00-20 16PR
12.00-20 16PR
12.00-20 16PR
4X
2
4X
2
4X
2
4X
2
3.3
4X
2
3.5
2 190
2 190
2 276
2 276
2 276
3.6
1 930
1 930
2 000
2 000
2 000
3.7
15
12
15
12
4455
15
12
4455
15
12
4466
15
12
4466
4.1
4466
4.2
0
0
0
0
4.3
5346
5310
5310
5310
4.4
7118
7118
7120
7120
7120
4.5
3035
3035
3064
3064
3064
4.7
1762
1762
1791
1791
1791
4.8
653
653
684
684
684
4.12
809
809
809
809
809
4.17
5748
5748
6225
6225
6225
4.19
4528
4528
5005
5005
5005
4.20
2448
2448
2607
2607
2607
4.21
75/200/1220
75/200/1220
90/200/1220
90/200/1220
90/200/1220
4.22
75 mm pin type
75 mm pin type
85 mm pin type
85 mm pin type
85 mm pin type
4.23
4.24
2350
2350
2500
2500
2500
520 - 2230
520 - 2230
520 - 2380
520 - 2380
520 - 2380
4.25
150
150
200
200
200
4.30
225
225
178
178
178
4.31
292
292
346
346
346
4.32
6333
6333
6880
6880
6880
4.34.1
4111
4111
4584
4584
4584
4.35
1475
1475
1754
1754
1754
4.36
30.6
31.2
30.5
31.1
26.6
28
26.6
28
26.3
27.3
30.6
31.2
30.5
31.1
26.6
28
26.6
28
26.3
27.9
5.1
0.36
0.39
0.36
0.39
-
-
-
-
-
-
5.2
0.37
0.39
0.37
0.39
-
-
-
-
-
-
5.2
0.42
0.52
0.42
0.52
0.34
0.41
0.34
0.41
0.34
0.41
0.44
0.52
0.45
0.52
0.36
0.41
0.36
0.41
0.36
0.41
5.2.1
0.5
0.48
0.5
0.48
0.5
0.48
0.5
0.48
0.5
0.48
5.3
5.1
5.2.1
0.48
0.5
0.48
0.5
0.48
0.5
0.48
0.5
0.48
5.3
41.4
99.2
44.9
118.6
51.4
113.4
52.9
113
53.8
5.5
99.8
41.4
99.2
44.9
118.6
51.4
113.4
52.9
113
53.8
5.5
46
31
38
30
45
33
38
33
35
31
5.7
46
31
38
30
45
33
38
33
35
31
5.7
6.2
5.3
6.2
5.3
6.3
5.4
6.4
5.5
6.5
5.6
5.9
6
5.1
6.1
5.2
6.1
5.3
6.2
5.4
6.3
5.5
5.9
oil-immersed / wet disc
oil-immersed / wet disc
oil-immersed / wet disc
5.10
193
193
193
193
193
10.1
100
100
100
100
100
10.2
100
100
140
140
140
10.3
128
128
128
128
128
10.4
hydrostatic
hydrostatic
hydrostatic
hydrostatic
hydrostatic
10.5
3.7
3.7
3.7
3.7
3.7
10.6
73
73
73
73
73
10.7
107
107
107
107
107
10.7.1
yes / Pin
yes / Pin
yes / Pin
yes / Pin
yes / Pin
(Note: Truck weight with open operator
module instead of fully equipped cab is 400
kg less. For axle loadings with open operator
module: Deduct 50 kg from the rear axle
ADDITIONAL DATA
oil-immersed / wet disc
PERFORMANCE DATA
0.5
99.8
H13-16XM-6: Complete truck with fully
equipped cab, with 5310 mm BOF (5400 mm
TOF) 2-stage lfl mast, 2500 mm wide Integral
Sideshift carriage and 1220 mm long forks.
DIMENSIONS
0
5346
oil-immersed / wet disc
TYRES & CHASSIS
L
10.00-20 16PR
WEIGHTS
15180
22808
DISTINGUISHING MARKS
HYSTER
10.8
loadings and deduct 350 kg from the front
axle loadings.)
17
MAST AND CAPACITY INFORMATION
3-Stage
Full free lift
2-Stage
standard
H8-10XMS-6 RATED CAPACITY KG@ 600 MM LOAD CENTRE
Lift height
(top of forks)
h3 (mm)
Lowered
height
h1 (mm)
3750
4650
5400
Free lift height
Overall
(top of forks) extended height
h2 (mm)
h4 (mm)
Without Sideshift (kg)
With Sideshift (kg)
H8XM-6
H9XM-6
H10XMS-6
H8XM-6
H9XM-6
H10XMS-6
9 500
10 600
8 000
9 000
10 000
3329
0
5172
8 600
3779
0
6072
8 600
9 500
10 600
8 000
9 000
10 000
4155
0
6822
8 600
9 500
10 600
8 000
9 000
10 000
5600
3021
1401
7006
7 300
8 200
9740
7080
7980
9180
6000
3154
1534
7406
7 160
8 060
9680
6940
7820
9140
6500
3321
1701
7906
6 980
7 860
9440
6760
7640
8900
7000
3487
1867
8406
6 780
7 640
9180
6580
7420
8700
3-Stage
Full free lift
2-Stage
standard
H10-12XM-6 RATED CAPACITY KG @ 600 MM LOAD CENTRE
Lift
height
h3 (mm)
Lowered
height
h1 (mm)
Free lift
height
h2 (mm)
Overall
extended height
h4 (mm)
H10XM-6
H12XM-6
H10XM-6
H12XM-6
3750
3630
-
5470
10 450
12 700
10 000
12 000
4650
4080
-
6370
10 450
12 700
10 000
12 000
5400
4455
-
7120
10 450
12 700
10 000
12 000
6200
4855
-
7920
10 450
12 700
10 000
12 000
6700
5105
-
8420
10 300
12 400
9 700
11 700
5600
3046
1436
7030
10 060
11 240
9 440
10 720
6000
3179
1570
7430
9 900
11 240
9 280
10 560
6500
3346
1735
7930
9 680
11 020
9 080
10 360
7000
3512
1900
8430
9 640
10 780
8 860
10 140
Without Sideshift (kg)
With Sideshift (kg)
3-Stage
Full free lift
2-Stage
standard
H13-16XM-6 RATED CAPACITY KG @ 600 MM LOAD CENTRE
Lift height
(top of forks)
h3 (mm)
Lowered
height
h1 (mm)
3750
3640
0
4650
4090
0
5400
4466
6200
Free lift height
Overall
(top of forks) extended height
h2 (mm)
h4 (mm)
Without Sideshift (kg)
With Sideshift (kg)
H13XM-6
H14XM-6
H16XMS-6
H13XM-6
H14XM-6
H16XMS-6
5470
13 600
15 000
16 400
13 000
14 000
16 000
6370
13 600
15 000
16 400
13 000
14 000
16 000
0
7120
13 600
15 000
16 400
13 000
14 000
16 000
4860
0
7920
13 600
15 000
16 400
13 000
14 000
16 000
6700
5110
0
8420
13 450
14 800
16 200
12 700
13 800
15 800
4400
3070
1300
6080
12 800
13 720
15 600
11 940
12 820
14 620
5000
3270
1500
6680
12 740
13 260
15 540
11 880
12 760
14 560
6000
3600
1830
7680
12 340
13 260
15 120
11 520
12 380
14 160
7000
3940
2160
8680
11 760
12 680
14 520
10 980
11 840
13 600
The capacities quoted are in conformance with the ISO 1074 standard for stacking and travelling
DRIVE TRAIN
POWER UNIT
POWERTRAINS
18
1.3
Drive: electric (battery or mains), diesel, petrol, LPG
7.1
Engine manufacturer/type
7.2
Engine power according ISO 1585 (nominal)
kW @rpm
7.2.1
Engine power according ISO 1585 (maximum)
kW @rpm
7.3
Rated speed
7.3.1
Torque (maximum)
7.4
Number of cylinders/displacement
7.5
Fuel consumption according VDI cycle
8.1
Type of drive unit
8.2
Transmission manufacturer/type
8.6
Wheel drive/drive axle manufacturer/type
8.11
8.12
Diesel
Diesel
Diesel
Cummins QSB 6.7 Stage IIIA
Cummins QSB 4.5 Stage IIIB
Cummins QSB 6.7 Stage IIIB
116 @ 2300
119 @ 2300
122@2300
116 @ 2300
122 @ 2200
125@2200
2300
2300
2300
597 @1500
624 @1500
732@1500
cm3
6 / 6700
4 / 4500
6/6700
l/h
hydrodynamic 3 speed
hydrodynamic 3 speed
hydrodynamic 3 speed
ZF / WG161
ZF / WG161
ZF / WG161
Axle Tech / PRC 425
Axle Tech / PRC 425
Axle Tech / PRC 425
Service brake
oil-immersed / wet disc
oil-immersed / wet disc
oil-immersed / wet disc
Parking brake
dry disc on drive axle
dry disc on drive axle
dry disc on drive axle
min -1
Nm@rpm
TRUCK DIMENSIONS
NOTE:
Specifications are affected by the condition
of the vehicle and how it is equipped, as well
as the nature and condition of the operating
area. If these specifications are critical, the
proposed application should be discussed
with your dealer.
¶ Bottom of forks
 Without load backrest
■ h6 +/- 3% tolerance depend on tyre
inflated pressure / or tyre brand
} Full suspension seat in depressed position
● Add 50mm with load backrest
‹ Stacking aisle width is based on the
5
V.D.I. standard calculation as shown on
illustration. The British Industrial Truck
Association recommends the addition of
100 mm to the total clearance (dimension
a) for extra operating margin at the rear of
truck.
† Gradeability figures (lines 5.7) are
provided for comparison of tractive
performance, but are not intended to
endorse the operation of vehicle on the
stated inclines. Follow instructions in the
operating manual regarding operation on
inclines.
✓ Optional equipment
† Optional on models H8-12XM-6 in
XM version, standard on
H13-16XM-6 in XM version.
‘ Measured according to the test cycles
and based on the weighting values
contained in EN12053.
Data available on request, as values are
= Centre of gravity of unladen truck
dependent on application
AST = Wa + X + l6 + a (if b12/2 < b13)
AST = Wa + (l6 – X ) 2 + (b12 – b13) 2 + a (if b12/2 > b13)
a = Minimum operating clearance
(V.D.I. standard = 200 mm BITA recommendation = 300 mm)
L6 = load lengths
b12 = load width
RATED CAPACITIES
Rated load (kg)
 Add 25 mm if optional 10.00 x 20 tyres
are fitted
NOTICE:
Load centre
Distance from front of forks
to centre of gravity of load.
Rated load
Based on vertical mast.
H16XM-6
H14XM-6
H13XM-6
H12XM-6
H10XM-6
H9XM-6
H8XM-6
Load centre (mm)
MAST TABLES:
Care must be exercised when handling
elevated loads. When the carriage and/or
load is elevated, truck stability is reduced.
It is important that mast tilt in either
direction be kept to a minimum when loads
are elevated. Operators must be trained
and adhere to the instructions contained in
the Operating Manual.
Hyster products are subject to change
without notice.
Lift trucks illustrated may feature
optional equipment.
Safety:
This truck conforms to the current EU
requirements.
19
STRONG PARTNERS. TOUGH TRUCKS.
TM
FOR DEMANDING OPERATIONS, EVERYWHERE.
Hyster supplies a complete range of warehouse equipment,
IC and electric counterbalanced trucks, container handlers
and reach stackers. Hyster is committed to being much more
than a lift truck supplier.
Our aim is to offer a complete partnership capable of
responding to the full spectrum of material handling issues:
Whether you need professional consultancy on your fleet
management, fully qualified service support, or reliable parts
supply, you can depend on Hyster.
Our network of highly trained dealers provides expert,
responsive local support. They can offer cost-effective finance
packages and introduce effectively managed maintenance
programmes to ensure that you get the best possible value.
Our business is dealing with your material handling needs so
you can focus on the success of your business today and in
the future.
HYSTER EUROPE
Flagship House, Reading Road North, Fleet, Hants GU51 4WD, England.
Tel: +44 (0) 1252 810261
www.hyster.eu
HYSTER
@
infoeurope@hyster.com
/HysterEurope
@HysterEurope
/HysterEurope
and FORTENS are registered trademarks in the European Union and certain other jurisdictions.
MONOTROL is a registered trademark, and DURAMATCH and
are trademarks in the United States and in certain other jurisdictions.
Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment.
A division of NACCO Materials Handling Limited.
Form number: 901254/4. Printed in England. TLC/03/13
www.hyster-bigtrucks.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising