Matrix CR25 - Sinks
Matrix CR25
1.5 Bowl no drainer
Fitting type: Undermount or Inset
Sink handing: Left hand main bowl
Finish style: White glaze
Min. base unit (bowl, tap & overflow only): 600 mm
Durable finest grade fireclay construction throughout
Packaged size L x W x D: 705 x 620 x 360mm
Hand finished quality
Supplied boxed or sleeved: Boxed
Model can be undermounted or inset fitted
Boxed weight: 44.20 kg
Sink only weight: 39.08 kg
Comfortably fits in a 600 base cabinet
90mm waste in half bowl to accept a waste disposer
Taphole provision to accept Swich filter diverter? No, Fit through worktop
Included parts:
2 X AX1002 (m)
1 X AX1007 (m)
1 X AX1009 (m)
1 X AX4003 (m)
1 X AX4002 (m)
90mm (1.5") Orbit manual basket
strainer waste - long bolt
Round overflow pipework
1.5 or 2.0 Bowl pipework
Fitting & care instructions & data sheet
- ceramic undermount
Fitting & care instructions & data sheet
- ceramic inset
Recommended accessories:
1 X AX2501
1 X AX3000
1 X AX2502 or AX2503
Silicone drainer mat 330 x 390mm
Bowl mat 252 x 380 R5
High & Dry drainer rack - Green & grey
or White & grey
All accessories can be
purchased directly from
or phone 01226 283434
Materials and workmanship warranty summary:
Sink materials & workmanship 10 years.
Waste kits 1 year.
Connecting pipework 1 year.
Care instructions:
Clean the products regularly using soapy water and a non
abrasive cloth, regular cleaning will prevent the build up
of lime scale and dirt.
Avoid contact with corrosive or abrasive substances.
After cleaning rinse thoroughly with clean water then dry.
For more detail see supplied booklet or
16/09/2013 - This sheet is a summary of the product information
full details are available on request, errors & omissions excepted, details
are subject to change without prior notification.
Domestic kitchen sink made of Fireclay ceramic
Load resistance:
(applies to wall hung sinks only)
For more information see
Product order code: (AW1010)
Product dimensions and installation information: note:
symbol indicates position of acoustic pad on stainless products.
*Important, fabricator /
installer notes for
undermount sinks:
The cut out size indicated is
aligned with outside edge of
the bowl top radius (see
example below).
You should confirm with your
client if the worksurface cutout
is to be cut flush, inside or
outside this suggested
perimeter shape & size.
If you create the cutout smaller
or larger than the indicated
size then the fit of the
accessories may be affected
and should be physically
All details are provided in good
faith but do not include the
tolerances of the material or
manufacturing process.
We request that a test cutout
is made in scrap timber and
checked against the actual
sink to be installed before
committing to cutting the
final worksurface.
Abode can not accept
liability for problems or
costs incurred by failure to
follow this request.
Overall product size: 548 x 500 x 225 corner radius 20mm
Note: the dimensions on
ceramic fireclay products are
subject to wider tolerances due
to the nature of this natural
material and the firing process.
Taphole(s) detail: None
Compatability with large square taps: No known incompatibilities
Wastehole(s) detail (mm): 90 / 90 / N/A (nb. 90mm wastes accept a waste disposal unit)
Min. base unit (refers to space required for bowl, tap and overflow only): fits 600mm carcass
Min. Recessed fitting width: required (bowl(s), tap and overflow: 543mm
*Worktop cut out size: 0x0 corner radius 0mm, for .DXF cut files please see
Min. & Max worktop depth or clip depth reach range: 0 - 0mm
Fitting temple supplied? No, use cut out instructions as supplied
Dishwasher under drainer? Distance from top of worktop to underside of the drainer 0mm
Other: No known incompatibilities
CAD cutout files can be
downloaded from
Bowl details: (sizes in mm unless specified otherwise)
Bowl 1 (typically main bowl):
Bowl 2 (typically ½ or ¾ bowl):
Bowl 3:
Bowl 1 size L x W x D (mm): 303 x 430 x 179
Bowl 1 construction: Moulded, 25.00mm
Bowl 1 floor radius (mm): 23
Bowl 1 Wastehole diameter (mm): 90
Bowl 1 overflow: Cirlcular, 30mm diameter
Bowl 1 texture: White glaze
Bowl 1 apx. volume (litres): 14.20
Bowl 2 size L x W x D (mm): 149 x 330 x 179
Bowl 2 construction: Moulded, 25.00mm
Bowl 2 floor radius (mm): 23
Bowl 2 Wastehole diameter (mm): 90
Bowl 2 overflow: N/A
Bowl 2 texture: White glaze
Bowl 2 apx. volume (litres): 9.20
Bowl 3 size L x W x D (mm): N/A x N/A x N/A
Bowl 3 construction: N/A, N/Amm
Bowl 3 floor radius (mm): N/A
Bowl 3 Wastehole diameter (mm): N/A
Bowl 3 overflow: N/A
Bowl 3 texture: N/A
Bowl 3 apx. volume (litres): N/A
Important: Please retain this sheet for future use
16/09/2013 - This sheet is a summary of the product information
full details are available on request, errors & omissions excepted, details
are subject to change without prior notification.
Product order code: (AW1010)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF