Touchscreen ATM Bank Manual

Touchscreen ATM Bank Manual
Touchscreen ATM Bank Manual
Model No. 3822
FEATURES
Touch Panel for data input
Real time clock with date
Alarm On/Off
Selectable 12/24 hour for clock
4-digit PIN code security system
Saving Target
Coins & Notes deposit and withdraw
Check Balance amount
Happy birthday & Merry Christmas music for celebration on these special days.
Demo for ATM Bank function
LED back light for display
Installing the batteries
1. Your Touchscreen ATM Bank runs on a total of 3 AA batteries.
2. Use a Phillips head screw driver to loosen the screw of the cover on the back of the unit.
3. Insert 3 AA batteries into the battery compartment as indicated by the polarity symbols (+ & -)
marked inside it.
4. Replace the cover and secure it with the screw.
Set TIME, Date and Alarm Time
SET TIME
After installing the batteries, (please don’t insert the ATM card), the LCD displays SET TIME for about
3 seconds, and then the screen will show the following display.
1. The first digit for hour flashes. Touch 0-9 or / to input it, and touch to confirm. The next digit
for hour flashes. Use the same process to input the other three digits for the hour and the minute.
Press
to confirm. AM flashes.
2. Touch
to select AM or PM, and touch
to select 12 or 24 hours format.
3. Touch OK to confirm the time setting.
SET DATE
After the time setting, LCD displays SET DATE for about 3 seconds, and the screen will show the
following display.
1. Touch 0-9 or / to input the first digit for date, and then touch
flashes. Touch the 0-9 or / to input the last digit for date. Touch
to confirm. The next digit
to confirm the date setting.
1
MONTH flashes.
2. Touch / to change the month, and then touch
to confirm the month. The third digit for the
Year flashes.
3. Touch the 0-9 or / to input the third digit of the Year, and then touch to confirm. The last
digit of Year flashes. Touch the 0-9 or / to input the last digit of Year, (The maximum year can
be set up to year 2099) and then touch OK to confirm the DATE setting.
Remark: During setting process, you can touch
to return back to previous entry.
SET ALARM TIME
After the DATE setting, the screen displays SET ALARM TIME for about 3 seconds, and the screen
will show the following display.
1. Touch 0-9 or / to input the first digit for hour, and then touch
to confirm. The next digit for
hour flashes. Use the same process to set the other three digits for the hour and the minute. After
press
to confirm the last digit for the minute, AM flashes.
2. Touch / to select AM or PM.
3. Touch OK to confirm the alarm time. The alarm is turned on and LCD shows the Alarm symbol ))
as shown in the following display screen.
DEMO ALM
))
4. To turn off the Alarm, Touch ALM. LCD will display ALARM ON. Touch ON, it will change to OFF.
Then the alarm is turned off. Touch BACK to go to clock mode. The Alarm symbol )) will not
show when the alarm is turned off.
FUNCTION IN CLOCK MODE
1. Touch DEMO. The ATM bank will introduce you to the main functions.
2. Touch & hold the DATE line for about 3 seconds, you can change the date.
3. Touch & hold the TIME line for about 3 seconds. You can change the time.
4. Touch ALM you can enter the alarm time setting.
5. Touch the screen to stop the alarm sound when alarm sounds.
SET UP FOR ATM BANK
To SET UP your ATM bank, you must Insert the ATM card.
When the card is inserted, the bank will say ‘WELCOME’ and ask you to enter the PIN code.
2
ENTER
Enter the factory default PIN code 0000 and touch ENTER to confirm. LCD displays ENTER NAME
for about 3 seconds, and the screen will show the following display.
Enter your name
Touch the correct characters to input your name. When the screen displays A-J, You can touch
display the characters to K-T, and touch
touch
to
again to display U-Z and symbol _ , --, ! . Or you can
to return back to last characters. If you want to correct the input letters, touch
/
to
move forwards or backwards and touch the correct character when it is flashing. You can enter a
maximum of 25 characters for your name. Touch OK to confirm. The screen display will show SET
BIRTHDAY for about 3 seconds and then it will change to the following display.
OK
Set your birthday
Touch 0-9 or / to input the first digit for date, and touch
to confirm. The next digit for date
flashes. Use the same process to input next digit and then touch to confirm MONTH flashes. Touch
/ to change the month and then touch OK to confirm your birthday Month.
Enter your new PIN code
Touch 0-9 to enter your new PIN code, (any 4 digit pin code) and then touch ENTER to save. The
ATM bank will ask you to enter your new pin code again to enter the ATM mode.
ENTER
BACK
ATM BANK FUNCTIONS
MAKE DEPOSIT
You can directly insert coins & notes at any time in ATM bank mode.
COINS:
To deposit coins, simply insert coins into the coin slot. The coin slot will recognise the amount of each
coin and will add it to the balance amount. The bank only accepts the coins of 1p, 2p, 5p, 10p, 20p,
50p, £1, & £2.
3
NOTES:
To deposit notes, insert the note into the note feeder. It will be rolled into the bank automatically. The
bank will ask you to select the note amount by touching the amount displayed on LCD, and the value
will be counted into the balance amount. The bank only accepts notes of £5, £10, £20, & £50.
CHECK YOUR BALANCE
Touch BALANCE menu, the screen will display your current balance amount.
Touching BACK will return the screen back to the default menu state.
! "#
$
£168.0
%
BACK
MAKE WITHDRAWAL
Touch WITHDRAW menu, the bank will ask you to enter the withdrawal amount
£
.
ENTER
BACK
1. Touch 0-9 to input your withdrawal amount and then touch ENTER to confirm. The red OPEN
button will light up for 5 seconds.
2. Press the OPEN button to open the ATM door and take out money equivalent to the entered
withdrawal amount, and then close the door. The value will be deducted from the balance
amount.
Note:
1. You can touch BACK to correct your input amount or return back to the default menu, when you
input the withdrawal amount before confirmation.
2. The door should be closed after the money has been withdrawn, otherwise the functions of the
ATM bank will not work. The bank will sound an alarm and inform you to close the door at 15
second intervals.
SET YOUR TARGET SAVINGS AMOUNT
Touch TARGET menu, the LCD will show the following screen:
TARGET
TARGET
BALANCE
BACK
Touch TARGET again, the screen will display your target saving amount. Touch SET, and then touch
4
0-9 to input your target saving amount (up to 999.99), touch SET to confirm.
& #
' (
£
&
SET
.
BACK
SET
BACK
SET
NOTE: You can touch BACK to correct the amount, or return back to the previous screen.
CHECK YOUR TARGET BALANCE
To check your target balance, touch TARGET BALANCE. The target balance will be shown on the
screen.
$
'
(
BACK
CHANGE YOUR PIN CODE
In the default ATM menu touch
and the following screen will be displayed. You can touch
PINCODE to change PIN code or Touch SOUND to turn off the sound.
% "
BACK
Touch PIN CODE, the bank will ask you to change your PIN code. The screen will display the
following:
NEW PIN:- - - -
.ENTER
BACK
Touch 0-9 to enter your new PIN code, (any 4 digit pin code) and then touch ENTER. The bank will
ask you to re-enter the PIN code again for confirmation. Touch 0-9 to input the same new PIN code
again and then touch ENTER to confirm.
NOTE: If the PIN code is not the same, the bank will not change the PIN code.
SOUND On/Off
Touch SOUND, and then touch ON? / OFF? to turn on/off the sound function. Touch OK to confirm.
5
% "
% "
)*
)
OK
BACK
SOUND
Note:
If you turn off the sound, the ATM bank will be completely silent; there will be no Demo
function, indication voice, or sound effects.
Notes:
1. When your balance is over 999.99, the bank will display ”YOUR BALANCE IS FULL”. You can
continue to deposit coins and notes and other functions will operate normally, but the balance will
remain at £999.99.
2. When the card is removed, the bank will say ‘GOOD BYE” and return to the clock mode, If the card
is not removed and no key is touched for about 3 minutes, the bank will automatically return to the
clock mode.
3. If the PIN code has been inputted incorrectly 3 times, the bank will return to clock mode.
RESET THE BANK
If your ATM bank is not working properly, or does not respond to your input use a pointed device to
press the RESET key on the back of the unit. All previous data and your ATM record will be cleared.
You must set up the clock, your pin code, name and birthday again.
NOTE
ALKALINE BATTERIES RECOMMENDED.
DO NOT USE RECHARGEABLE BATTERIES.
DIFFERENT TYPES OF BATTERIES ARE NOT TO BE MIXED.
ONLY BATTERIES OF THE SAME OR EQUIVALENT TYPE AS RECOMMENDED ARE TO BE USED.
EXHAUSTED BATTERIES ARE TO BE REMOVED FROM THE UNIT
THE SUPPLY TERMINALS ARE NOT TO BE SHORT-CIRCUITED.
Please retain these instructions for future reference.
6
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising