Accessories - Raymac Kitchens

Accessories - Raymac Kitchens
410
Ref. SQ861
70
Amalthea Single bowl and drainer
860/500/226
400
Brushed Steel £773
30
30
350
450
Cut-out size: 840/480mm
State hand of drainer when ordering
6
226
Cabinet size 450mm
410
Ref. SQ1002
79
Amalthea 1.5 bowl and drainer
1000/500/226
391
Brushed Steel £794
30
30
350
60
174
356
30
6
Cut-out size: 980/480mm
State hand of drainer when ordering
130
226
Cabinet size 800mm
410
70
400
30
350
60
350
340
226
Ref. SQ1162
Amalthea 2 bowl and drainer
1160/500/226
30
Brushed Steel £1023
6
Cut-out size: 1140/480mm
State hand of drainer when ordering
30
Cabinet size 800mm
430
70
Ref. SQ862
Amalthea 2 bowl
860/500/226
400
30
50
350
60
350
Brushed Steel £1023
Cut-out size: 840/480mm
50
6
228
Cabinet size 800mm
Accessories
All models are available with a choice of four
accessories that will make your sink in to an all
round food preparation area. There are two
stainless steel colanders, one that will fit in the
main bowls of all models and a smaller stainless
colander that can fit in main or half bowl.
Finally there is a choice of nylon or wooden
chopping boards that are designed to fit over the
bowl or the drainer.
24
Ref. VSH40Q
Stainless Steel Large
Colander £189
Ref. VSH20Q
Stainless Steel Colander
Fits in half and main
bowls £124
Ref. TLQ40
Wooden Chopping
Board £75
Ref. TTQ40
White Nylon Chopping
Board £75
Supplied with 90mm
Strainer Waste Kits
The Amalthea sinks are the ultimate in modern urban design.
They are produced using the latest pressing technology to achieve
the sleekest of ‘sharp looks’.
The bowls are a useful 226mm deep and the drainers are also deeply
recessed to help contain spillages. Each model has a range of versatile
accessories to help widen its uses in the kitchen. The brushed finish
also compliments beautifully with stainless steel appliances.
These sinks are manufactured from high quality 1.2mm gauge stainless
steel which minimises flexing and ensures long term good looks.
All sinks are supplied with a single tap-hole.
Deeply recessed drainer
Powerful aesthetics
Bowls have unique 5°
instead of welded seams
226mm deep bowls
All Models are
suitable for
Waste Disposers
see page 116
Stainless Steel
Inset
Amalthea
Inset
Amalthea SQ1002 shown with Vixo tap see page 162
25
Inset
Box-Line
The Box-Line are seriously smart
sinks, their pure rectilinear shape is
uncompromising and has taken
minimalism to a new level - strictly
for the contemporary kitchen.
Manufactured from high quality
1.2mm gauge stainless steel
that will ensure long term good
looks.
The Box-Line BL80 shown with colander
Ref. BL80
Box-Line 80
Single bowl and drainer
800/500/200
Polished £497
Cabinet size 800mm
State hand of drainer
when ordering
Cut-out size: 782/482 R10
Ref. BL100
Box-Line 100
1.5 bowl and drainer
1000/500/200
Polished £730
Cabinet size 600mm
State hand of drainer
when ordering
Cut-out size: 982/482 R10
Ref. BL116
Box-Line 116
1.75 bowl and drainer
1160/500/200
Polished £755
Ref. OTO0298
Box Tap
Chrome £366
Brushed Steel £464
Min. 0.5 bar pressure
required
Cabinet size 800mm
State hand of drainer
when ordering
Cut-out size: 1142/482 R10
Ref. BL80 Duo
Box-Line 80 Duo
1.75 bowl
800/500/200
Polished £730
Cut-out size: 782/482 R10
Cabinet size 800mm
26
The Box-Line BL100 shown with utility tray and colander
Accessories
All models are available with a choice of three accessories
that will make your sink in to an all round food preparation
area. There is a stainless steel colander that will fit in the in
the main bowls of all models, a stainless steel utility tray
that fits across the bowls to act as an additional drainer
and finally a frosted glass cutting board. All of which are
designed to slide along the outer edges of the sink.
All Models are
suitable for
Waste Disposers
see page 116
Ref. 04511
Stainless Steel Utility
Tray £98
The Box-Line BL80 shown with utility tray
Ref. 04521
Stainless Steel
Colander £127
Supplied with pop-up
Stainer Wastes in all
bowls
The Box-Line BL80 shown with glass cutting board
Stainless Steel
Inset
Ref. 03250
Sliding Glass Chopping
Board £73
27
Inset
Ideal
see
2400
rend
h X-T
it
w
n
Show
Accessories
Chrome Pop-up
90mm Strainer
Waste included
152
page
The Ideal sinks incorporate many of the best features from the
world of professional catering. They consist of a work and
preparation area with a separate resting surface and are
available with optional catering grade stainless steel
gastronorms in either perforated or plain models. Providing
even more versatility there is also an optional wooden
chopping board which can be positioned anywhere along the
sinks length - simply slide it along.
Choose from either the single bowl version or, for a particularly
busy kitchen, the double bowl version is ideal. Gauge 0.9mm.
Ref. 84010126
Stainless Steel
Gastronorm solid £73
Ref. 84020115
Stainless Steel Gastronorm
perforated £105
Ideal Stainless Steel containers perforated and plain.
Rear quarter bowl is supplied with
stainless steel colander
Wooden chopping board - slides
along entire length of sink
Ref. 72031710
Ideal Left hand drainer
1.25 bowl and drainer
1150/515/175
Polished £741
Stainless Steel Colander
for rear quarter bowl,
included with sink.
Ref. 72031709
Ideal Right hand drainer
Polished £741
Cabinet size 600mm
Cut-out size: 1130/495
Ref. 72100518
Sliding Wooden
Chopping Board £98
Ref. 72031711
Ideal Workstation
2.25 bowl
1150/515/175
Polished £901
Cut-out size: 1130/495
Ref. 72100523
Sliding Glass
Chopping Board £67
28
Cabinet size 1200mm
Inset
Fusion
Rieber
Looking for more dynamism in the kitchen? These two
new Fusion models could well be the answer - they
are the next generation of inset sinks with generous
proportions and slick design - a real
presence in the kitchen.
Gauge 0.9mm.
Available in a
scratch resistant
Linen Finish
Fusion 720161 shown with Oxygen Professional tap see page 135
Sliding Glass Chopping
Board £67
Supplied with pop-up basket
strainer wastes
The Fusion 720161 has the most
minimalist look with its two very
sophisticated smooth drainers.
Ref. 720161
Fusion 1.5 bowl double drainer
1155/520/180
Polished £714
Available with left main bowl only
Cut-out size: 1135/500 R12.5
Cabinet Size 600mm
The Fusion 720160 features a fluted
single drainer providing a more
traditional appearance.
Ref. 720160
Fusion 1.5 bowl single drainer
1150/515/175
Polished £714
Linen £736
State hand of drainer when ordering
Cut-out size: 1135/500 R12.5
Cabinet Size 600mm
Stainless Steel Half Bowl Strainer
included with both models
Stainless Steel
Inset
Ref. 72100522
All Models are
suitable for
Waste Disposers
see page 116
29
Inset
Waterstation Cubic
The Cubic range are a highly versatile new design
of sinks. They are manufactured in Germany by
Rieber who have been supplying the professional
catering sector for over 80 years. Now for the first
time we can offer a totally new way of cooking with
Rieber’s uncompromising high quality system
designed for the professionals and now available
for everyone. Two models are available, one with
and one without a drainer.
Simple scaling and seasoning of fish
Included with both Cubic models:
Pop-Up waste system
Stainless steel dish for waste bowl
Stainless Steel Gastronorm perforated tray
(can be used with most combination steam ovens)
Two-thirds beech chopping board, 325/352mm
Other optional accessories are also
available as illustrated below.
Fabrication: 1.25mm gauge stainless steel.
Optimal vegetable preparation
Hygienic washing of salad
Safe straining of pasta
Optional Accessories
The high quality steel gastronorm trays
are ideal for general food preparation.
The trays can be used at two levels:
resting on the top of the bowl or
simply turning the tray 90° the tray
can then rest on the lower instep of
the bowl.
Ref. 84010116
65mm deep
Stainless Steel
unperforated
tray £30
Ref. 72100562
233/252mm
Wooden
Chopping
Board £52
30
Rieber
Ref. 72016610
Cubic Left hand bowl right
hand drainer 980/517/175
Brushed Steel £1058
Ref. 72016620
Cubic Right hand bowl left
hand drainer 980/517/175
Brushed Steel £1058
Cabinet size 600mm
Cut-out size: 955/498 R5
Cabinet size 600mm
Ref. 72016601
Cubic Inset
1.25 bowl 600/517/175
Brushed Steel £816
Cut-out size: 570/496 R5
Ref. 72016603
Cubic Undermount
1.25 bowl 600/517/175
Brushed Steel £816
Stainless Steel
Inset
All Models are
suitable for
Waste Disposers
see page 116
31
Inset
Corner
We offer two corner sink solutions; both
these 90° angle sinks are designed to fit in
corner situations as opposed to the usual
straight run installation. An ideal solution if
space is very tight and the food preparation
area cannot be sacrificed. Gauge 0.7mm.
Ref. 2431
Corner
Double bowl and drainer
830/830/200
Polished £337
Linen £358
Supplied with 90mm
strainer wastes .
Corner cabinet only
Corner Accessories
Ref. 6531
Corner
1.75 bowl and drainer
830/830/200
Polished £412
Linen £422
Ref. BD500
Sliding Wooden
Chopping Board £40
Chevron
Ref. BS201 (2431)
Stainless Steel
Basket £23
Inset
Ref. GBD500
Sliding Glass
Chopping Board £63
Accessories
Chevron 1.75 bowl
800/500
Polished £315
34
State hand of drainer
when ordering
Cabinet size 800mm
Ref. CH250
Chevron 2.5 bowl
1000/500
Polished £422
Linen £463
Cabinet size 1000mm
Ref. CH175
Ref. BS201
Stainless Steel
Basket £23
Supplied with 90mm
strainer wastes
Pop-up waste included
Cut-out size 976/476 R10
Gauge 0.8mm
Ref. 03210
CH250 Stainless
Steel Colander £59
Ref. BD500
Sliding Wooden
Chopping Board £40
Ref. BS101 (6531)
Chrome Basket
£23
Pop-up waste included
Cut-out size 776/476 R10
Gauge 0.8mm
Cabinet size 800mm
Ref. 72013202
Rieber
Wingline
1.25 bowl and drainer
1000/471/160
Polished £275
Cabinet size 450mm
Wing
Inset
Left hand drainer only.
There are currently no
accessories available with
this model.
The Wing family of sinks are for those of
you looking for something a bit different.
Their Star Trek looks will certainly be the
centre of attention in any kitchen.
Manufactured in Germany to Rieber’s
usual exacting high standards.
Gauge 0.8mm.
90mm pop-up
Strainer Wastes
supplied with all
Wing insets
Wing 100 Accessories
Wing 100
Single bowl and drainer
830/515/155
Polished £382
Linen £403
Ref. DS02
Round Chrome
Basket £32
Cabinet size 450mm
Available in left hand
drainer only
Not suitable for Waste Disposer
Ref. 721006
Stainless Steel
Colander £67
Ref. 72013203
This one is built for speed with its
aerodynamic lines. A highly unique
shaped sink incorporating a good size
main bowl and a useful half bowl.
Wing 150
1.5 bowl and drainer
1120/520/160
Polished £412
Left hand drainer only
Cabinet size 600mm
All Models are
suitable for
Waste Disposers
see page 116
Stainless Steel
Inset
Ref. BP11
Wooden Board
£38
Ref. 19401
35
Inset
Swerve
Swerve inset shown with Essex monobloc tap see page 167
The Swerve has got the lot! Glamour, style and
practicality. Its huge bowl will swallow up oversized grill pans and roasting trays with confident
ease. While the 18 gauge stainless steel has
been shaped to create a very elegant sink that
will keep its timeless beauty for years to come.
Gauge 1.2mm.
Ref. 3377W-NA
Swerve
Inset Bowl
838/457/228
Polished £1513
Ref. 3126
Bowl Grid
Stainless Steel £158
90mm Waste
Chrome £16
36
Deluxe Waste
Option
see page 61
Swerve inset shown with Trough ref 31548 see page 53
Straining pasta using Kit B
Ref. OL8050
Ocean
Inset Bowl
800/500/200
Polished £525
Cut-out size: 765/470
Cabinet size 800mm
90mm Strainer
Wastes included
Ocean
Inset
Washing up small items using the steel bowl
from Kit A
The Ocean is one of our most versatile
inset sinks. It boasts a huge single bowl
that will swallow up any oversized oven
trays you care to throw in to it. It also has
some really clever accessories that
transform it into a multi-task work station.
All made from the highest quality materials
that will take on the toughest of tasks.
Gauge 1.2mm.
All Models are
suitable for
Waste Disposers
see page 116
Kit A
Kit B
Kit C
Included as standard
Large steel bowl with waste,
and drainer tray.
Wooden chopping board, steel
round bowl, round colander
and glass food preparation
board £127
Steel drainer tray, plate rack
and cutlery basket £72
Stainless Steel
Inset
Washing vegetables using drainer tray from Kit A
37
Inset
Duetta
The Duetta sinks are the
next generation of the
classic separate round bowl
and drainer.
Gauge 0.9mm.
90mm Strainer
Wastes included
Ref. DSO2
Stainless Steel
Basket £32
Ref. BP11
Wooden Chopping
Board £38
Cabinet size 450mm
Ref. D60
Duetta
Single bowl and drainer
915/485/205
Brushed Steel £210
Cut-out size 880/452 R226
Cabinet size 1000mm
Ref. D90
Duetta
Double bowl
915/485/205
Brushed Steel £219
Oboe
Inset
Cut-out size 880/452 R226
A perfect sink if room is tight,
the generous bowl size belies the
Oboe’s compact proportions.
Gauge 0.7mm.
90mm Strainer
Wastes included
Ref. BS701
Chrome Basket £21
Ref. 3230
Wooden Chopping
Board £37
Cabinet size 500mm
Ref. 813
Oboe Single bowl and drainer
847/444/160
Polished £143
Linen £151
Cut-out size 823/420 R210
38
Ref. RB450
Round Bowl
Brushed Steel £92
Linen £105
Cut-out size
440mm
416
185mm
Cabinet size 450mm
Round Bowls
Ref. RD450
Round Drainer
440mm
Brushed Steel £88
Linen £103
416
Round Bowl & Centrovel Accessories
Ref. DS02
Stainless Steel
Basket £32
Ref. BP11
Wooden Chopping
Board £38
Prep Sink
Ref. R5389
Kohler Round Bowl
Brushed Steel £240
Depth 134mm
Ref. C510
Round Bowl
Polished £110
Linen £119
490
Cabinet size 450
292
Cabinet size 350mm
90mm Strainer
Wastes included
Stainless Steel
Inset
Centrovel
Cut-out size
Linen Finish
See page 8 for
details on finishes
Cabinet size no restriction
Inset
Fits within the worktop
thickness so can be
fitted over appliances
and drawer units
Inset
Cut-out size
A selection of round bowls that offer great versatility
in the kitchen - these classic favourites continue to
be a popular choice as the main washing-up sink or
as a secondary food prep sink.
39
Inset
Star single bowl
Bowls
These two sinks are made by Suter in
Switzerland in gauge 0.8mm stainless
steel, please note that they do not
have tap holes.
Inset bowls are an ideal solution
when space is limited and a good
choice as a food prep sink in your
kitchen. We offer a selection from
a variety of manufacturers so the
specifications vary slightly.
See also our Round Bowl collection
on page 39.
Cabinet size 400mm Bowl Depth 170mm
Ref. C33
Star Rectangular bowl
Polished £219
Star
This model benefits from a highly
useful mini strainer bowl.
Gauge 0.8mm stainless steel.
1.25 bowl
Cut-out size 354/444 R129
Supplied with 90mm strainer waste
Cabinet size 500mm Bowl Depth 175mm
Ref. RO45
Star Rectangular bowl
Polished £257
Cut-out size 474/424 R110
Supplied with 90mm strainer waste
Ref. EC56
Star Rectangular 1.25 bowl
Polished £310
Cut-out size 544/484 R5
Supplied with 90mm pop-up
strainer waste
Cabinet size 500mm
Bowl Depth 177mm
Inset
500 Spacesavers
The 500 Spacesaver range has been designed
for the smaller kitchen, for instance if you have a
galley style kitchen with only 50cm deep cabinets,
then these sinks will fit the bill.
Gauge 0.7mm.
Cabinet Size 400mm
Ref. SS465
Linen Finish
available with
SS86R
Single bowl
465/435/160
Satin £93
No tap-hole
Supplied with 60mm
waste/plug and chain waste
Ref. SS86R
Spacesaver Single bowl
and drainer
860/435/150
Satin £78
Linen £103
Cabinet Size 500mm
40
Cut-out size 836/411 R10
With reversible tap-holes
Supplied with 60mm ring plug waste
Roma
The Roma sinks made are in Italy in gauge 0.6mm
stainless steel and benefit from integrated tap
hole positions. These sinks have available to them
the following accessories.
Wooden Chopping Board
Ref. TL34 (for RO42 & RO3416) £52
Ref. TL45 (for RO58) £63
Stainless Steel Basket
Ref. C134 (for RO42 & RO3416) £34
Ref. C145 (for RO58) £52
Hipno
Manufactured in Portugal
from gauge 0.7mm
stainless steel.
Stainless Steel
Colander (for RO3416)
Ref. VSH16 £69
Ref. RO58
Roma Single bowl
580/500/210
Brushed Steel £219
Ref. SS650
Hipno Single bowl
and drainer
Satin £193
Reversible tap-holes
Supplied with 90mm
pop-up strainer waste
Cut-out size: 550/480mm
Cabinet Size 600mm
Bowl Depth 200mm
Cabinet Size 500mm
1 tap-hole reversible
Supplied with 90mm
strainer waste
Cut-out size: 626/476 R10
Ref. RO3416
Ref. RO42
Roma 1.5 bowl
580/500/210
Brushed Steel £273
Roma Single bowl
420/500/180
Brushed Steel £156
1 tap-hole
Reversible with pop-up
waste
1 tap-hole
Supplied with 90mm
strainer waste
Cut-out size: 550/480mm
Cut-out size: 400/480mm
Cabinet Size 600mm
Cabinet Size 450mm
Ref. SS790
Spacesaver
Double bowl
790/420/160
Satin £235
1 tap-hole
Supplied with 60mm waste
Cabinet Size 800mm
Ref. SS1160
Spacesaver Double bowl
and drainer
1160/420/160
Satin £242
1 tap-hole
state hand of drainer when ordering
Supplied with 60mm waste
Stainless Steel
Inset
Cabinet Size 800mm
41
Inset
Sapphire
The Sapphire is our lowest priced
range offering great value for money.
Manufactured from 0.65mm
gauge steel.
Ref. GBD500
Sliding Glass
Chopping Board £63
Ref. BD500
Sliding Wooden
Chopping Board £40
Ref. BS501 (SA150)
Chrome Basket £23
Ref. HBS501
Chrome Half Bowl
Basket £18
Ref. SA100
Sapphire Single bowl
and drainer
965/500/155
Satin £90
Minimum cabinet size 500mm
Cut-out size: 940/475
Supplied with 60mm plug and
chain waste.
Not suitable for waste disposer.
Ref. SA150
Sapphire 1.5 bowl and
drainer
965/500/155
Satin £147
Minimum cabinet size 600mm
Cut-out size: 950/478
Supplied with 60mm plug and
chain waste in main bowl and
90mm strainer waste in half bowl
XL1000
Inset
Big Bowl
These two sinks offer highly useful extra
large bowls that can even accommodate
range style oven trays. More large bowl
sink options are available on page 12/13
The XL1000 is a stylish sink that would look great in
either a kitchen or utility environment. Gauge 0.7mm.
Ref. XL1000
XL1000 Single bowl
and drainer
Overall size 1000/500
Bowl size 500/400/180
Minimum cabinet size 600mm
XL980
Satin £275
Cut-out size: 980/480mm
Inset
Supplied with
90mm Strainer Waste
The XL980 has the deepest bowl in this range at
254mm. It is available with either one tap hole for a
monobloc mixer or two holes to fit a deck/bridge
mixer or pillar taps. Gauge 0.9mm.
Ref. XL980
XL980 Single bowl
and drainer
Overall size 980/510
Bowl size 508/356/254
Minimum cabinet size 600mm
Supplied with 60mm
plug and chain waste
Not suitable for waste disposer
42
Satin £264
Cut-out size: 960/490mm
State hand of drainer and
tap hole requirement.
Inset
Shallow Bowl
For Wheelchair users
The extra shallow bowl on the PH940 allows for a wheelchair user to wash-up without stretching to reach the
bottom of the bowl. The underside of the bowl has also
been given extra thermal insulation.
Ref. PH940
Single bowl and drainer
Overall 940/490
Bowl size 400/340/127
£158
A simple range of one and two tap-hole insets
that won’t set the heart racing by any means but
offer good practicality at an affordable price.
Ref. WCWO
Plug and Chain waste
with overflow
£5
Ref. SBSD Single bowl and drainer
2 Tap-hole
Dimensions: 940/485
Bowl dimensions: 420/345/170
£73
Cabinet size 500mm
Gauge 0.7mm
Ref. SBSD-BS Single bowl and drainer
2 Tap-hole
Dimensions: 940/485
Bowl dimensions: 420/345/170
£119
Cabinet size 500mm
Gauge 0.9mm
Ref. SBDD Single bowl and double drainer
1 or 2 Tap-hole
Dimensions: 1400/510
Bowl dimensions: 400 /340 /160
£211
Cabinet size 500mm
Gauge 0.7mm
Ref. DBSD Double bowl and drainer
1 or 2 Tap-hole
Dimensions: 1400/510
Bowl dimensions: 400/340/160
£280
Cabinet size 1000mm
Gauge 0.7mm
Stainless Steel
Inset
Contract
Inset
Supplied with 60mm ring plug and waste.
43
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising