RISH FLEX 9024A
RISH FLEX 9024A
RoHS
Input Data
Nominal Input Voltage (2 x Vac)
Manual select Input from 115 to 230
Input Voltage range (Vac)
2
Inrush Current (Vn and In Load) I t
Frequency
Input Current (115 – 230 Vac)
Internal Fuse
External Fuse (recommended)
Output Data
Output Voltage (Vn) Factory Setting ±3%
Adjustment range (Vadj)
Start up with Strong Load (capacitive load)
Turn-On delay after applying mains voltage
Continuous Current at 24 V < 40°C (In)
Continuous Current at 24 V < 50°C (In)
Continuous Current at 24 V < 60°C (In)
Power Boost Current at 24 Vdc 60°C(In)
Current max. Overload ≅ 4Vdc (permanent)
Current Short Circuit Icc
Max 2 sec.: Hiccup mode
Permanent : Continuous Mode
Hold-up Time ( min. Vac) 24Vdc 5A
Residual Ripple
Efficiency
Over temperature Protection
Short-circuit protection
Dissipation power load max (W)
Over Load protection
Over Voltage Output protection
Parallel connection
Power Good Contact rating (EN60947.4.1):
Max. DC1: 30 Vdc 1 A; AC1: 60 Vac 1A
Min.1mA at 5 Vdc
Climatic Data
Ambient Temperature operation
115 – 230 Vac
90 – 135
(115)
170 – 264 (230)
≤ 11 A ≤ 5 msec.
47 – 63 Hz ±6%
1.8 – 0.9 A
T4A
10 A (MCB curve B)
24 Vdc
22 – 27 Vdc
≤ 50.000µF
1 sec. (max)
5 A (permanent)
4.5 A (permanent)
4 A (permanent)
In (60°C) x 1.5 ≥ 3 min.
Imax=In60°Cx(1.8 - 2.2)
Norms and certifications
The CE mark in According to EMC 2004/108/EC and Low
voltage directive 2006/95/EC.
Electrical Safety
In compliance to UL508.
According to IEC/EN 60950 (VDE 0805) e EN 50178 (VDE
0160) for assembling device. The unit must be installed
according to IEC/EN 60950.Input / Output separation: SELV
EN60950-1 and PELV EN 60204-1. Double or reinforced
insulation.
EMC Immunity
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN61000-6-2
EMC Emission:
EN61000-6-4, EN61000-3-2
Standards Conformity
EN 60204-1 Safety of Electrical Equipment Machines
12 A
Typ. 20 msec
≤ 80 mVpp
≥ 91 %
Yes. Shut-down output
and automatic restart.
1° Manual Reset
2° Hiccup Mode
3° Continuous Out Mode
11
Yes
Yes (typ. 35 Vdc)
Yes
Resistive load
Min permissive load
Ambient Temperature Storage
Humidity at 25 °C, no condensation
-25 up to +70 °C
(>60°derating 2.5% °C)
-40 up to +85 °C
95 % to 25 °C
Isolation Voltage (In / Out)
Isolation Voltage (In / PE)
Isolation Voltage (Out / PE)
Protection Class (EN/IEC 60529)
Reliability: MTBF IEC 61709
Pollution Degree Environment
Connection Terminal Blocks Screw Type
Protection class
Dimension (w-h-d)
Weight
3000 Vac
1605 Vac
500 Vac
IP 20
> 500.000 h
2
2,5 mm (24 – 14 AWG)
I with PE connected
55x110x105 mm
0.50 kg approx.
General Data
Input: single-phase: 115 – 230 Vac
Output: 24 Vdc 60°C
Efficiency up to 91%
Strong overload without switch-off, up to 50%
Flexible Power continuity: from 95 to 120 W
“Power Good” Relay
Three mode of output protections:
1) Manual Reset
2) Hiccup Mode
3) Continuous Out Mode
DIN Rail Mountable
Extremely small size
3 Year warranty
RISHABH INSTRUMENTS
All specifications are subject to change without notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising