compact farmall® a series tractor specifications

compact farmall® a series tractor specifications
COMPACT FARMALL® A SERIES TRACTOR SPECIFICATIONS
COMPACT FARMALL A SERIES TRACTOR SPECIFICATIONS
®
MODEL
Compact Farmall 30A
Compact Farmall 35A
ENGINE
Engine Type
Gross HP at 2600 RPM Rated Speed
PTO HP @ 540 RPM
Number of Cylinders / Displacement / Aspiration
Emission and Exhaust Treatment
Fuel Tank Capacity
System Rating / Alternator Rating
ISM diesel, Tier 4 B / Final
32.2 HP (24 kW)
36.2 HP (27 kW)
25.8 HP (19.2 kW) –
Hydrostatic transmission;
27.4 HP (20.4 kW) –
Gear transmission
29.0 HP (21.6 kW) –
Hydrostatic transmission;
30.7 HP (22.9 kW) –
Gear transmission
3 / 92 cu. in. (1.5 L) / Turbo
Internal exhaust gas recirculation (EGR) plus
Diesel Particulate Filter (DPF)
7.4 U.S. gal. (28 L)
12 volt / 85 amp
TRANSMISSION
PRODUCT SPECIFICATIONS
Type - Mechanical / Hydrostatic / Drive wheels
Case IH compact Farmall A tractors provide the absolute best value for
the dollar. These rugged, economical tractors tackle tough chores, from
loading and mowing to rotary cutting and clearing snow.
• 3-cylinder turbo diesel Tier 4 B/Final-compliant engines deliver rapid response
with low emissions.
• Roomy, open platform provides great visibility and the controls are
straight-forward and easy to use.
12 × 12 / 3-range / 4WD
Maximum Forward Speed - Gear
14.2 MPH (22.9 Km/h)
Maximum Forward Speed - Hydrostatic
14.8 MPH (23.8 Km/h)
Gear Shuttle Type
Rear Diff. Lock Engagement
Brake Type
Creeper Range
PTO – Rear
Mid-Mount PTO
Synchro
Mechanical
Wet multi disc
N/A
Independent with electro-hydraulic engagement
2,000 RPM; dealer installed attachment
HYDRAULIC SYSTEM
Hydraulic System Type
Open center
• Choice of the smooth-shifting 12×12 transmission or a three-range, two-pedal
hydrostatic transmission for infinitely variable speeds.
Implement Pump Flow
8.2 GPM (31 L/min.)
• High-capacity 8.2 GPM hydraulic pump plus a separate steering pump means
you have generous flow for hydraulic demands.
Steering
• Full-function 3-point hitch and PTO options let you easily attach and
use a wide variety of implements.
Type
• Add the L340A front loader to expand the versatility of compact Farmall A
tractors to moving soil, gravel, mulch, snow, bales and more.
• Compact Farmall A tractors are economical to buy and to use and are fully
supported by your Case IH dealer.
Number of Remotes
0 or 1
Hydrostatic
3-POINT HITCH
Lift Capacity at Lift Pin
CAT I with fixed link ends, turnbuckle lift link,
and telescopic stablizers
1,808 lbs. (820 kg)
DRAWBAR
3-position
Extendable
DIMENSIONS
Length
10.08 ft. (3.07 m)
Height
7.3 ft. (2.23 m)
Width
5.54 ft. (1.7 m)
Weight with ROPS
3,067 lbs. (1 391 kg)
TIRES
Standard
Front: 25 × 8.5-14, R4; Rear: 43 × 16.00-20, R4
Optional
R-3 turf type and R-1 ag type
CNH Industrial America LLC reserves the right to make improvements in design and changes in specifications at any time without notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions
and illustrative material herein are as accurate as known at time of publication, but are subject to change without notice. Availability of some models and equipment builds varies according to the country in which the equipment is used.
©2015 CNH Industrial America LLC. All rights reserved. Case IH is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Printed in U.S.A. www.caseih.com
CIH12161501
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising