32:(55(48,5(0(176 This game must be connected to a properly grounded outlet to reduce shock hazard & insure proper game operation. See Sec. 5, Schematics & Troubleshooting, Chp. 3, Cabinet Wiring (Transformer Power Wiring), for transformer connections required for Normal, High, and Low Line conditions. 110v AC - 125v AC @ 60Hz Normal Line: Domestic AVG OPERATION MAX OPERATION use an 8AMP 250v Slo-Blo Fuse. CURRENT: 8AMP CURRENT: 2.8AMP WATTAGE: 940w WATTAGE: 329w 218v AC - 240v AC @ 50Hz High Line: Export AVG OPERATION MAX OPERATION England use 2x 5AMP 250v Slo-Blo Fuses. CURRENT: 1.8AMP CURRENT: 5AMP & Hong | 8AMP* Kong use (*England & Hong Kong use an 8 250v S/B Fuse.) | WATTAGE: 412w WATTAGE: 1145w 1832w* an 95v AC - 108v AC @ 50Hz / 60Hz Low Line: Export Japan Only AVG OPERATION MAX OPERATION use an 8AMP 250v Slo-Blo Fuse. CURRENT: 2.6AMP CURRENT: 8AMP WATTAGE: 812w WATTAGE: 264w AMP 8A Fuse. ???????*$0(',0(16,216???????75$163257$7,21 The overall Front / Back Height dimensions include the added 1" with the Leg Levelers turned all the way in. / 0 Ceiling Height Requirement: An additional 1 " is required for the rotation ( ) of the Backbox to the upright position. The complete Back Height required with Sign or Dot Display and rotation: 81" 75" 27" 28" Back Width Back Height * * P L E A S E N O T E: The TO URNMENT PLAY Sign or betaBRITE Color Dot Display will add up to 4 " to the overall Back Height for a total of 79 ". + 4G" To reduce the possibility of damage, observe ALL precautions whenever transporting the game. Read & follow Section 1, Chapter 1, Pinball Game Set-Up Procedures, and How to Secure the Backbox for Transporting. Remove the legs and secure the game within the transporting vehicle. SAVE AND RETAIN ALL PRINTED INFORMATION INSIDE THE CABINET ! 23" 47" 22" 51" Height 56" Width 31" Depth 31" Approx. Unboxed Weight: 260lbs. (+/- 10) Boxed Weight: Front Height Wt. 290lbs. (+/- 15) 55" The Cabinet is designed to give the recommended 6.5° pitch to the Playfield when all four (4) Legs are installed with the Leg Levelers turned all the way in. With the Leg Levelers turned all the way out (not recommended), an additional 1 " should be added to the respective Back or Front Height dimensions. 36" +1" Leg Length = 30H"
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project