Countertop and Freestanding Ice and Water

Countertop and Freestanding Ice and Water
Countertop and Freestanding Ice and Water
Dispenser with Chewblet® Ice Icemaker
7CI100A, 7FS100A
Installation, Operation and Service Manual
Serial numbers above D25455
7CI100A
7FS100A
Following installation, please forward this manual
to the appropriate operations person.
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Order parts online:
www.follettice.com
00951640R03
Contents–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Ambient Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Refrigeration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Heat Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Detailed Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Countertop Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Freestanding Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Maintenance/Cleaning Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Accessing Internal Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Filter Display Indicator Activation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning and Sanitizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LED Indicator Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Water Feed Schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Bin Melt Water/Evaporator Feed/Clean Out System Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Vent System Schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Refrigeration Schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Condenser Fan Motor Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
User Interface Display Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Electrical Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Exterior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Bin Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Evaporator Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Base Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2
Dispenser and Icemaker 7CI100A/7FS100A
Welcome–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability, and outstanding
after-the-sale support. To ensure that this product delivers that same degree of service, we ask that you take a
moment to review this manual before beginning the installation. Should you have any questions or require technical
help at any point, please call our technical service group at (877) 612-5086 or +1 (610) 252-7301.
Before You Begin––––––––––––––––––––––––––––––––––––––––––––––––––––
After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If damage
is found, immediately notify the shipper and contact Follett Corporation so that we can help in the filing of a claim,
if necessary. If needed, the serial number of your dispenser can be found by removing the drip tray (1) and locating
the serial number label (2).
2
1
Check your paperwork to verify that you received the correct dispenser. Follett configuration numbers are designed
to provide information about the type of dispenser you are receiving. The following is an explanation of the different
model numbers.
7
Dispenser Storage
Capacity
7 lb
CI
100
Configuration
CICountertop
FS Freestanding
A
Icemaker Capacity
100
lb per day
Condenser
A
Air-cooled
Important Safety Information––––––––––––––––––––––––––––––––––––––––––
Please read and adhere to the following safety information while installing, using, or servicing your Follett 7 Series
Ice Dispenser.
1. Always disconnect power before servicing the dispenser.
2. Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
3. Ice is food. Follow the recommended cleaning and sanitizing instructions to maintain cleanliness of
delivered ice.
Dispenser and Icemaker 7CI100A/7FS100A3
Specifications––––––––––––––––––––––––––––––––––––––––––––––––––––––
Dimensions
7CI100A
7FS100A
Width
14.55" (370 mm)
14.55" (370 mm)
Depth
22.05" (560 mm)
22.05" (560 mm)
Height
17.53" (450 mm)
41.93" (1065 mm)
Unit Shipping Weight
90 lb (41 kg)
120 lb (54.4 kg)
Ambient Information
CAUTION!
The 7CI100A and 7FS100A are for indoor use only.
Maximum*
Minimum*
Air Temperature
100 F (38 C)
50 F (10 C)
Water Temperature
90 F (32.2 C)
40 F (4.5 C)
Water Pressure
70 psi
†
Relative Humidity
10 psi
55% at 78 F
* Use outside of these limitations is misuse and will void warranty.
† Best performance is achieved between 80 F (27 C) and 50 F (10 C).
Plumbing
§§
§§
§§
§§
Water Inlet: 1/4" MPT
Optional Drain Accessory Kit (item# 00956375): 1/2" ID tubing
Water Mineral Content: Greater than 5 ppm (mg/l) TDS and less than 400 ppm (mg/l) TDS
Water shut-off recommended within 10 feet (3 m) of dispenser
Water
§§ For use in applications with less than 400 ppm (mg/l) total dissolved solids in water (either naturally occurring
or treated with reverse osmosis) and hardness not to exceed 12 grains per gallon (gpg).
§§ Not recommended for use with softened water
Clearances
§§ 3" (77 mm) behind and on each side of dispenser for electrical and connection and ventilation
Electrical
§§ 115V, 60 Hz, 1 phase, 5A, maximum fuse 15A
§§ Connect to dedicated 15A circuit, fuse or breaker
§§ Must be grounded - requires 3-prong outlet. Do not remove ground.
Refrigeration
§§ Refrigerant R134a – 7.2 ounces (204 grams)
Heat Rejection
§§ 1700 BTU/hr (498 W)
4
Dispenser and Icemaker 7CI100A/7FS100A
Specifications
(continued)– ––––––––––––––––––––––––––––––––––––––––––––––
Detailed Drawing
Countertop models
14.55" (370 mm)
14.55" (370 mm)
NEMA 5-15
right angle
17.54"
(446 mm)
L2
G
17.54"
(446 mm)
L1
6.72"
(171 mm)
6.79"
(172 mm)
power cord
22.05" (560 mm)
2.40"
(61 mm)
1/4" MPT
water inlet
2.98"
(76 mm)
Freestanding models
14.55" (370 mm)
14.55" (370 mm)
NEMA 5-15
right angle
17.54"
(446 mm)
L2
17.54"
(446 mm)
G
L1
6.72"
(171 mm)
6.79"
(172 mm)
power cord
2.40"
(61 mm)
1/4" MPT
water inlet
2.98"
(76 mm)
24.39"
(620 mm)
22.05" (560 mm)
Dispenser and Icemaker 7CI100A/7FS100A5
Installation–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
CAUTION!
No service or maintenance should be performed until the technician
has thoroughly read this service manual. Except for routine cleaning
and sanitizing, only qualified technicians should attempt to service
or maintain this equipment.
Countertop Installation
Fig. 1 Installation instructions for freestanding model may be found on page 8.
countertop models
1. A clearance of at least 3" (77 mm) is required behind and on
each side of the dispenser for electrical connection and ventilation
(Fig. 1).
minimum 3" (77 mm)
clearance required
2. Rough-in the electrical service and water line.
§§ Electrical: 115V, single phase, 15A receptacle required. The dispenser
has an integral 8 ft. (2.4 m) cord and plug.
§§ Water: supply line (with shut-off valve) connects to the dispenser's 1/4"
MPT inlet.
NOTICE!
If installing optional Drip Tray Drain Kit or Leg Accessory,
complete those steps before proceeding.
3. Connect water line. Recommended routing (Fig. 2) allows easy access
to water for cleaning and sanitizing procedure.
4. Connect power supply.
5. Sanitize the dispenser prior to use (see Cleaning and Sanitizing on
page 13).
Fig. 2 3' (76 mm)
1/4" MPT
6
Dispenser and Icemaker 7CI100A/7FS100A
Installation
(continued)
––––––––––––––––––––––––––––––––––––––––––––––––––
Optional Drip Tray Drain Installation
The optional Drip Tray Drain Kit (item# 00956375) requires a floor drain
within 15 ft. (4.5 m) of the dispenser. For detailed installation instructions,
please refer to the instructions shipped with the Drip Tray Drain Kit.
Fig. 3 1. If installing optional Drip Tray Drain Kit, cut hole in countertop for
drain tube (Fig. 3).
3"
(76 mm)
15 3/4"
(400 mm)
NOTICE!
Units without legs must have alternate hole positioning.
6"
(152 mm)
6 5/16"
(160 mm)
2. Remove drip tray and drill 11/32" hole through drain nipple (Fig. 4).
Fig. 4 3. Connect supplied drain tubing to drain tray nipple with supplied hose
clamp. Run drain tubing to floor drain.
4. Return tray to original position.
Dispenser and Icemaker 7CI100A/7FS100A7
Installation
(continued)
––––––––––––––––––––––––––––––––––––––––––––––––––
Optional Leg Accessory Installation
Fig. 5 CAUTION!
Use caution when tipping the dispenser during leg installation. Do
not lay unit on back or side. DO NOT EXCEED 30° angle. Tipping
more than 30° can result in compressor malfunction.
1. If installing optional 4" Leg Accessory (item# 00956300), place a 5"
(127 mm) spacer underneath the dispenser to ease installation.
2. Remove four plastic, thread-protecting plugs from bottom of
dispenser.
5" (127 mm)
min.
spacer
3. Screw each leg into chassis (Fig. 3).
Freestanding Installation
Installation instructions for countertop model may be found on Countertop
Installation on page 6.
1. A clearance of at least 3" (77 mm) is required behind and on
each side of the dispenser for electrical connection and ventilation
(Fig. 1).
2. Rough-in the electrical service and water line.
§§ Electrical: 115V, single phase, 15A receptacle required. The dispenser
has an integral 8 ft. (2.4 m) cord and plug.
§§ Water: supply line (with shut-off valve) connects to the dispenser's 1/4"
MPT inlet.
NOTICE!
If using Leg Accessory with base stand, complete those steps
before proceeding.
8
Dispenser and Icemaker 7CI100A/7FS100A
Fig. 6 freestanding models
minimum 3" (77 mm)
clearance required
Installation
(continued)
––––––––––––––––––––––––––––––––––––––––––––––––––
3. Remove four plastic, thread-protecting plugs from bottom of
dispenser.
Fig. 7 4. Attach dispenser to base stand with supplied hardware (Fig. 7).
NOTICE!
If installing optional Drip Tray Drain Kit, complete those steps
before proceeding.
X4
5. Connect water line. Recommended routing (Fig. 8) allows easy access
to water for cleaning and sanitizing procedure.
6. Connect power supply.
7. Sanitize the dispenser prior to use (see Cleaning and Sanitizing on
page 13).
Fig. 8 3' (76 mm)
1/4" MPT
Dispenser and Icemaker 7CI100A/7FS100A9
Installation
(continued) ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
8. Secure unit to wall or cove molding with supplied bracket (Fig. 9) to
prevent tipping.
Fig. 9 Note: Fasteners must be supplied by installer.
WARNING!
Freestanding unit must be secured to wall to prevent tipping.
Failure to do could result in personal injury or damage to the
unit.
Optional Leg Accessory Installation
1. If installing optional 6" Leg Accessory (item# 00956318), tilt or lay
base stand on side and screw each leg into stand (Fig. 10).
Fig. 10 Optional Drip Tray Drain Installation
The optional Drip Tray Drain Kit (item# 00956375) requires a floor drain
within 15 ft. (4.5 m) of the dispenser. For detailed installation instructions,
please refer to the instructions shipped with the Drip Tray Drain Kit.
Fig. 11 1. If installing optional Drip Tray Drain Kit, remove drip tray and drill
11/32" hole through drain nipple (Fig. 11).
2. Connect supplied drain tubing to drain tray nipple with supplied hose
clamp. Run drain tubing to floor drain.
3. Return tray to original position.
10
Dispenser and Icemaker 7CI100A/7FS100A
Maintenance/Cleaning Mode––––––––––––––––––––––––––––––––––––––––––
Fig. 12
Cleaning Mode (Dispensing Disabled) - Use when cleaning surface
Entering Cleaning Mode disables the User Interface and allows you to clean
the outside of the dispenser without accidentally dispensing water or ice.
2
1. To enter Cleaning Mode, press and immediately release the
maintenance/clean switch (Fig. 12.1) so that only "FRESH
FILTERED ICE AND WATER" displays in the user interface
(Fig. 12.2).
1
2. To exit Cleaning Mode, press and immediately release the
maintenance/clean switch so that the ice and water icons also
display in the user interface.
Maintenance Mode (All Operation Disabled) - Use when cleaning ice
machine
Entering Maintenance Mode disables all operations and allows you to safely
clean and/or sanitize the icemaker and dispenser.
4
1. To enter Maintenance Mode, press and hold the maintenance/
clean switch (Fig. 12.3) until
displays in the user interface
(Fig. 12.4).
2. To exit Maintenance Mode, press and hold the maintenance/clean
switch until
no longer displays in the user interface.
3
Note: Entering and exiting Maintenance Mode will reset the six-month
periodic reminder.
Accessing Internal Components–––––––––––––––––––––––––––––––––––––––
Fig. 13 CAUTION!
Except for routine cleaning and sanitizing, only qualified
technicians should attempt to service or maintain this equipment.
1. Unplug dispenser.
2. Remove (unscrew) chrome ice dispenser chute (Fig. 13.1).
1
3. Remove the drip tray (Fig. 13.2).
4. Remove the two screws (Fig. 13.3) on the front panel (behind the
drip tray).
5. Remove and set aside the front panel (Fig. 13.4) - do not
disengage the plug on the back of the User Interface or the
tubing at the water dispenser chute (if so equipped).
3
2
4
Dispenser and Icemaker 7CI100A/7FS100A11
Filter Display Indicator Activation––––––––––––––––––––––––––––––––––––––
If you purchased your dispenser with a Follett filter, the filter display indicator Fig. 14 activation has been preset at the factory.
If you are using an “after market filter,” an adjustment may be made to
activate the “Fresh Filtered Ice & Water” display.
1
Activating “Fresh Filtered Ice & Water”
1. Remove the front panel as explained in Accessing Internal
Components on page 11 then refer to Fig. 14.
2. Remove top panel (Fig. 14.1).
3. Remove (1) screw and top of control board enclosure (Fig. 14.2).
4. Locate the DIP switches on the dispenser's control board (Fig. 15).
Use a fine-pointed object to move the “Filter” DIP switch (DIP switch
#3) to the ON position.
Deactivating the Six-Month Maintenance/Filter Change Reminder
1. Use a fine-pointed object to move the “PM” DIP switch (DIP switch
#8) to the ON position.
2
OFF
1
No internal filter
Not used (OFF position)
Not used (OFF position)
3
Ice & water
Internal filter supplied or to display "Fresh Filtered"
4
5
6
30 minute delay
7
8
12
2
Not used (OFF position)
Ice only
15 minute delay
Not used (OFF position)
Six-month PM enabled
Fig. 15
ON
Six-month PM disabled
Dispenser and Icemaker 7CI100A/7FS100A
Cleaning and Sanitizing––––––––––––––––––––––––––––––––––––––––––––––
Cleaning and sanitizing should be performed at least every 6 months (more
often if local water conditions dictate). For initial startup, only sanitizing is
required.
Fig. 16
1
CAUTION!
§§ Place the dispenser in Maintenance Mode prior to servicing or
cleaning the ice machine. See Maintenance/Cleaning Mode on
page 11.
§§ Rubber gloves and safety goggles (and/or face shield) should
be worn when handling Cleaner or Sanitizer.
§§ Do not mix Cleaner and Sanitizer together. It is a violation of
federal law to use these solutions in a manner inconsistent with
their labeling.
§§ Do not use bleach.
Required Supplies
§§ (3) x 7 oz. SafeCLEAN™ environmentally-friendly icemaker cleaner packets
§§ Nu-Calgon IMS-II sanitizing concentrate
§§ Funnel and Bucket
Cleaning: Icemaker and Dispenser
1. Dispense all the ice out of the unit, then see Accessing Internal Components on page 11.
2. Press and hold maintenance/clean switch until
displays in the user interface to enter Maintenance
Mode.
3. Remove (unscrew) chrome ice dispense chute.
4. Remove drip tray.
5. Remove (2) screws located behind the drip tray.
6. Move front panel and place on top or beside unit.
7. Remove plug cap from the end of drain tube and lower tube to drain water into bucket.
8. After the system has been drained of water replace plug cap in drain tube.
9. Secure tube in holder.
10.Remove cap from bin lid cover.
11. Screw cap onto ice discharge chute.
12.Mix SafeCLEAN Ice Machine Cleaner, (3) x 7 oz. packets, with 3 gal. (11.4 L) of water.
13.Pour cleaning solution into bin lid access spout until solution reaches the spout neck.
14.Allow the solution to remain in unit for 15 minutes.
15.While machine is cleaning, remove top and right side panel to access and clean air-cooled condenser.
16.Drain system by lowering drain tube into bucket.
17. Secure drain tube into holder.
18.Fill one time with potable water and drain with fill tube. Secure drain tube.
Sanitizing: Icemaker and Dispenser
1. Mix a sanitizing solution of 2.5 gal. (9.5 L) of water and 4 oz. (118 ml) of Nu-Calgon IMS-II sanitizing
concentrate.
2. Pour sanitizing solution into bin lid access spout until solution reaches the spout neck.
3. Allow the solution to remain in unit for 5 minutes.
4. Drain system by lowering drain tube.
5. Secure drain tube into holder.
6. Fill and drain three times with potable water.
7. Place a bucket under the dispense chute and remove cap. Caution: Some sanitizing solution will remain
and drain out when cap is removed. Reposition cap on bin lid spout.
8. Reinstall front panel, ice dispense chute, and drip tray.
9. Press and hold maintenance/clean switch to exit Maintenance Mode.
Dispenser and Icemaker 7CI100A/7FS100A13
Cleaning and Sanitizing
(continued)–––––––––––––––––––––––––––––––––––––––
Cleaning: User Interface and Exterior Cabinet
1. Press and release maintenance/clean switch so that only "FRESH FILTERED ICE AND WATER" displays
in the user interface to enter Cleaning Mode (and disable dispensing).
2. Plastic parts, including the user interface, can be cleaned with a non-abrasive glass cleaner. Clean
stainless steel panels with stainless steel cleaner.
3. Press and release maintenance/clean switch to put unit back into service.
Service––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
LED Indicator Description
The LED Indicator is located behind the front panel.
LED Name
Clean
LED Color
Power ON
Low bin
Making ice
Sleep cycle
Time delay
Low water
Maint
Service
HI amps
HI press
Water leak
Drip tray
PM
Clean
Fig. 17 Description
Green
The dispenser is in Cleaning Mode. Dispenser is disabled to allow for cleaning of front panel.
See Maintenance/Cleaning Mode on page 11..
N/A
Not used.
PM
Red
Six-month periodic maintenance required.
Drip tray
Red
Drip tray full.
Water leak
Red
Internal leak in dispenser.
High amps
Red
Auger gearmotor has exceeded 0.55A.
Service
Red
8000 hour bushing check (call Follett technical service group at (877) 612-5086 or
+1 (610) 252-7301).
Maintenance
Yellow
Enter Maintenance Mode by pressing and holding maintenance/clean switch for 5 seconds.
Unit will not make or dispense ice.
Low water
Yellow
Insufficient water supply to machine or no low bin LED upon startup.
Time delay
Yellow
Ice production will not resume for at least 15 minutes after a full bin is achieved and a
minimum amount of dispense activity has elapsed.
Sleep cycle
Green
After a full bin and 10 minutes of non-use, the unit goes into standby and will not produce ice
until either 12 hours has elapsed or ice or water has dispensed.
Making ice
Green
Gearmotor, compressor, and fan motor energized.
Low bin
Green
Bin switch closed calling for ice.
Power on
Green
Power supplied to unit.
—
14
Dispenser and Icemaker 7CI100A/7FS100A
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Water Feed Schematic
Evaporator
Float
Water Chute
(optional)
Filter (optional)
Water Solenoid Valve
(optional)
Water Solenoid Valve
Dispenser and Icemaker 7CI100A/7FS100A15
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Bin Melt Water/Evaporator Feed/Clean Out System Schematic
Storage Bin
Vent System Schematic
Storage Bin
Vent Tube
Reservoir
Tube
16
Dispenser and Icemaker 7CI100A/7FS100A
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Refrigeration Schematic
CONDENSER
FILTER-DRIER
CAP TUBE
COMPRESSOR
EVAPORATOR
ACCUMULATOR
HIGH PRESSURE VAPOR
LOW PRESSURE LIQUID
HIGH PRESSURE LIQUID
LOW PRESSURE VAPOR
Dispenser and Icemaker 7CI100A/7FS100A17
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Condenser Fan Motor Removal
18
Dispenser and Icemaker 7CI100A/7FS100A
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
User Interface Display Identification
Operation Display
Condition
Procedure
Normal operation
­—
Cleaning Mode
Press and release maintenance/clean
switch to clean the user interface
without dispensing ice or water (see
Maintenance/Cleaning Mode on
page 11).
Drip tray full
Empty drip tray.
Six-month periodic Follow Maintenance Mode procedure
maintenance
(below) and also see Cleaning and
required
Sanitizing on page 13.
Maintenance
Mode
Enter Maintenance Mode by pressing
maintenance/clean switch until
displays. Complete the cleaning and
sanitizing procedure shown on page
13 and change the filter, if so
equipped. Exit Maintenance Mode by
pressing and holding maintenance/
clean switch until
no longer
displays.
Service - 8000 hr
bushing check
Call Follett Technical Service Group
at (877) 612-5086 or +1 (610) 2527301. The flashing wrench indicates
that the 8000 hr bushing check is
required.
Dispenser and Icemaker 7CI100A/7FS100A19
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Service Display
20
Dispenser and Icemaker 7CI100A/7FS100A
Condition
Procedure
High amps
Contact Follett technical
service group at (877) 6125086 or +1 (610) 252-7301.
Internal leak in dispenser
Locate leak and repair Press reset on control board.
Contact Follett if icemaker is
leaking.
N
POWER L1
GND
WHITE
WHITE
#17
WHITE/
GRAY
GRN-YEL
#11
BLACK
BLUE/
PINK
GRN-YEL
BLACK
#4
AUGER
FAN
BLACK
BLUE
BLACK
#8
#7
BLACK
#15
GRN-YEL
WATER DISPENSE VALVE
BLACK
#18
#10
BLACK
#14
DISP.
#12
FAILSAFE SOLENOID VALVE
WHITE
#16
WHITE
P1
L1
L1
L1
P3
P19
P20
P21
FAN
ICE DISP
P6
FS
WD
K4
K7
K6
K5
CO2
AUGER
CAP
K2
#13
N
BLUE
#5
N
D21
D22
D19
N
D20
D17
N
N
N
T2
CURRENT SENS
N
K3
D18
N
N
P5
RESERVOIR
WATER SENSOR
DRIP TRAY WATER
SENSOR
CHASSIS
WATER SENSOR
P4
P2
AUGER
GRN-YEL
#19
UV LIGHT
UV ON
D37
#20
#2
S2
P10
SERIAL COMM
HI PRS
P14
P16
WATER AUX
START
RELAY
P17
WATER LEVELS
BIN
P12 BIN
P12 BIN P11 CLEAN SAFE
P15
ICE AUX
P17
WATER LEVELS
YELLOW
ORANGE
BLACK
P18
T1
BLACK
WHITE
S
R
O.L.
K1
BLACK
#1
P7
RESET
S1
MAINT.
CLEAN
P11 CLEAN SAFE
P7
P8 RS485
RS485 UI
6
2
5
1
PROGRAM
P9
MODEL SELECT
GRN-YEL
C
#3
COMP.
P13 SPARE CTS
D16
COMPRESSOR
D1
CLEAN
POWER
LOW BIN
MAKING ICE
SLEEP CYCLE
TIME DELAY
LOW WATER
MAINTENANCE
SERVICE
HI AMPS
HI PRESSURE
WATER LEAK
DRIP TRAY
PM
USER
INTERFACE
RS485 UI
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
Service
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––
Electrical Wiring Diagram
Dispenser and Icemaker 7CI100A/7FS100A21
Parts––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Exterior
6
4
7
5
2
1
22
Dispenser and Icemaker 7CI100A/7FS100A
3
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Exterior
Reference #
Description
Part #
1
Drip Tray Assy
00957613
2
Panel, Front Assy - Includes Water Nozzle and Plug
00957621
3
Chute, Water (water option)
00957688
4
Panel, Left
00957639
5
Panel, Right
00957647
6
Panel, Top
00957654
7
Panel, Rear
00957662
Not Shown
Cord, 115 VAC
00958058
Not Shown
Packaging for Returns, Dispenser
00957993
Not Shown
Fitting, Elbow - 1/4" FPT x 1/4" Tube
00974261
Not Shown
Drip Tray Drain Kit
00956375
Dispenser and Icemaker 7CI100A/7FS100A23
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Interior
4
7
6
1
12
2
3
5
11
10
9
10
8
24
Dispenser and Icemaker 7CI100A/7FS100A
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Interior
Reference #
Description
Part #
1
Valve, Dispense Solenoid (water option)
00957704
2
Switch, Cleaning
00957712
3
Drain/Feed Tube with Cap
00957720
4
Valve, Failsafe Solenoid
00957738
5
Compressor with Mounting Hardware
00958009
6
Condenser
00958017
7
Condenser Fan and Cord
00958025
8
Control Board with Stand-offs
00958033
9
Capacitor, Gearmotor
00958041
10
Sensor, Retainer Hardware Kit
00958066
11
Relay and Overload
00958090
12
Refrigeration, Piping Assy
00958132
Dispenser and Icemaker 7CI100A/7FS100A25
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Bin Assembly
9
3
4
5
6
2
1
7
8
26
Dispenser and Icemaker 7CI100A/7FS100A
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Bin Assembly
Reference #
Description
Part #
1
Ice Chute Assembly
00957670
2
Ice Transport Tubing with Insulation
00957746
3
Switch, Shuttle
00957753
4
Shuttle, Complete Assy
00957761
5
Lid, Bin Assy
00957779
6
Bin, Assy
00957787
7
Auger, Dispense
00957795
8
Motor, Dispense
00957803
9
Cap and Insulation, Bin
00957936
Not Shown
For serial numbers D17619 and below:
Bin Cap
00931519
Ice Chute
00927210
Chute Adapter
00926550
Dispenser and Icemaker 7CI100A/7FS100A27
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Evaporator Assembly
10
11
12
13
14
13
2
8
5
6
3
1
7
4
9
28
Dispenser and Icemaker 7CI100A/7FS100A
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Evaporator Assembly
Reference #
Description
Part #
1
Gearmotor
00957811
2
Main Housing with Front Seal and Screws
00957829
3
Screws, Main Housing
00957837
4
Auger with front seal
00957845
5
Ice Compression Nozzle Assy
00957852
6
Front Seal and O-Ring
00957860
7
Evaporator Assembly with Insulation
00957878
8
Housing, Bushing with Insulation
00957886
9
Hardware kit, Gearmotor
00957894
10
Reservoir and Float Complete Assy
00957902
11
Lid, Reservoir with Insulation and O-Ring
00957910
12
Float Valve
00957928
13
“T” Fitting - 1/4"
502923
14
Tubing - 1/4" (sold in 12" increments)
502079
Dispenser and Icemaker 7CI100A/7FS100A29
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Base Stand
2
1
30
Dispenser and Icemaker 7CI100A/7FS100A
Parts
(continued)–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Base Stand
Reference #
Description
Part #
1
Front Panel, Base
00958108
2
Latches with Bayonets, Base
00958116
Not Shown
Tray, Base
00958124
Not Shown
Packaging for Returns, Base
00957985
Reference #
Description
Part #
Not Shown
Internal water filter option
00958223
Not Shown
Water filter cartridge, 5 micron
00968107
Not Shown
Manifold, filter head
00968115
Not Shown
Cleaning and sanitizing kit, single use
00979856
Not Shown
SafeClean, case of 24
00132001
Not Shown
IMS II sanitizer concentrate, 16 oz
00979674
Not Shown
6" Legs for base stand, set of 4
00956318
Not Shown
4" Legs for countertop dispenser, set of 4
00956300
Not Shown
Kit, add water option
00957944
Not Shown
Kit, delete water option
00957951
Miscellaneous
Dispenser and Icemaker 7CI100A/7FS100A31
SafeCLEAN and SensorSAFE are trademarks of Follett Corporation.
Chewblet and Follett are registered trademarks, and Horizon is a trademark of Follett Corporation, registered in US.
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
00951640R03
08/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising