Product Overview 9100D
Product Overview
9100D
Portable Shaker Vibration Calibrator
The Modal Shop
3149 East Kemper Road
Cincinnati, OH 45241
Phone: +1.513.351.9919
Fax: 513.458.2171
info@modalshop.com
Brief Overview
We've taken a successful industrial product, the 9100C Portable Vibration Calibrator, with an outdated
design, and run it through the TMS innovation engine. The Modal Shop has engineered market
leadership, packaging, performance and precision with state of the art actuation and reliability to create
the 9100D.
Benefits:
With improved reference accelerometer and system uncertainty, the new 9100D Portable Vibration
Calibrator is ideal for field validation and calibration of an entire measurement channel. Use it to
calibrate accelerometers, velocimeters and proximity probes, confirm machine vibration alarm trip
points are set properly and ensure end-to-end functionality.
Main benefits are:



Rugged portability
o Sturdy shaker element
o Heavy duty quality and protection of sealed Pelican® brand case
Simple and elegant usability for the plant floor and beginner metrologists
o Easy to use interface, with just two dials to adjust frequency and amplitude
o Improved battery life to last more than 18 hours
Precision control
o PCB® industry standard ICP® quartz shear mode reference accelerometer
o Digital electronics including compact amplifier, including digital data acquisition and
innovative closed loop control algorithm for enhanced stability and accuracy
MPO-0001 REV NR
The Modal Shop
2
Table of Contents
Introduction ...................................................................................................................................... 4
Pricing .............................................................................................................................................. 4
Key Features ..................................................................................................................................... 5
Suggested Environments and Applications ......................................................................................... 5
Improvements in New 9100D as Compared to Previous 9100C ........................................................... 6
Technical Comparison to 9100C ......................................................................................................... 7
Engineering Drawing ......................................................................................................................... 8
Quickstart Operational Guide ............................................................................................................ 8
Technical Tips ................................................................................................................................... 9
Calibration Certificate ..................................................................................................................... 10
Supplied Accessories ...................................................................................................................... 11
Optional Accessories ....................................................................................................................... 11
More Information ............................................................................................................................ 12
Contact Information ........................................................................................................................ 12
MPO-0001 REV NR
The Modal Shop
3
Introduction:
The 9100D Portable Vibration Calibrator (PVC) is the ideal tool for the field check of accelerometers,
velocity transducers and proximity probes over a wide operating frequency and amplitude range. With a
simple, easy to use interface, the unit is a small, completely self-contained vibration reference source
that conveniently validates the entire channel of transducers through measurement, monitoring or
recording systems. Packaged in a lightweight, heavy-duty Pelican Storm Case, the 9100D is always ready.
The 9100D neatly and precisely integrates a built-in sine wave generator, power amplifier,
electrodynamic shaker, NIST traceable reference accelerometer and digital display. The integral,
precision PCB ICP quartz reference accelerometer provides superior stability, while the shaker table is
built with robust carbon fiber composite armature flexure supports. The state of the art TMS electronic
design, significantly extends battery life and provides closed loop level control for superior quality
vibration calibration from 7 Hz to 10 kHz compared with other portable field calibrators.
The 9100D is also available as a K9100D kit configuration. This kit configuration adds a Fluke digital
multimeter, additional mounting accelerometer adaptors and a Microsoft Excel spreadsheet macro to
create metrology styled calibration certificates.
Pricing:
For pricing and delivery information, please contact your local sales representative. A list of contacts
can be found at: http://www.modalshop.com/sales.asp.
MPO-0001 REV NR
The Modal Shop
4
Key Features:


Small and self-contained for in-situ calibration of both accelerometers, velocity sensors and
proximity probes
o Confirm machine vibration alarm trip points are set properly

Lightweight, industrial Pelican Case dramatically improves durability and portability

Rugged shaker element design with carbon fiber composite armature flexures

Provides NIST traceable transducer verification

Precision quartz reference accelerometer and conditioning electronics improve uncertainties

Increased battery life of up to 18 hours
Simple and easy user interface, with only 2 dials and digital display
Suggested Environments and Applications:


Applications
o Any industrial customer who relies on sensors and installed instrumentation to protect
their assets. In MOST cases the assets cost several (x100 or more) times the cost of a
9100D.
o Verification and calibration of vibration transducers and related test systems
o Verification of connector and cabling integrity
o Verification of speed indicator (*key phasor®) measuring systems
o Linearity check of proximity probes and vibration pick ups
o Check alarm, alert trip points in condition monitoring equipment, PLC, DCS or SCADA
control systems
Environments
o Energy & Power Generation
 Gas Turbines, Compressors, Oil & Gas, Wind Turbines
o Process Monitoring & Protection
 Cooling Towers, Pumps, Reciprocating Machinery, Bearing Condition
o Predictive Maintenance
 Gearboxes, Motors, Bearings, Machine Tools
o Manufacturing operations
o Most industrial environments
*Key phasor is a registered trademark of GE Energy/Bently Nevada
MPO-0001 REV NR
The Modal Shop
5
Improvements in New 9100D as Compared to Previous 9100(C):







New, rugged industrial Pelican package design greatly improves durability, portability and
aesthetics
Simplified user interface (just two dials instead of multiple potentiometers, buttons and slides)
greatly improves control and usability
The built-in reference accelerometer has been upgraded to a precision PCB quartz ICP
accelerometer, the same unit as is installed within the K394A3x series of precision air bearing
calibration grade shakers. This reference design improves the stability and accuracy of the
9100D.
State-of-the-art digital electronics provide superior closed-loop, drift free level and frequency
control
Battery life extended from 5 hours to 18 hours (typical, 100 gram payload at 1 g)
Low frequency performance greatly improved, with 1 dB accuracy specified down to 10 Hz and
operation permitted down to 7 Hz

Precision amplitude control protects shaker from over travel

Frequency units displayed in either Hz or CPM, user selectable

Two rate sensitive dials allow for easy adjustment of frequency and amplitude
Acceleration units displayed in either peak (pk) or RMS, user selectable (full set of English and
Metric units shown in table below)
CPM
Acceleration
(Peak or RMS)
g pk
Velocity
(Peak)
in/s pk
Displacement
(Peak to Peak)
mils pk - pk
Hz
g rms
mm/s pk
mm pk - pk
Frequency
m/s2 pk
m/s2 rms
Units as displayed on the 9100D backlit LCD user interface
Upcoming 9100D features:



BNC input that allows users to input an external signal to drive the shaker table independent of
the 9100C user controls
BNC output that allows users to output the raw voltage signal from the integral reference
accelerometer
For applications that REQUIRE this functionality , the existing 9100C is still available
MPO-0001 REV NR
The Modal Shop
6
KEY: Highlighted items are superior specifications
Technical Comparison:
9100D
9100C
GENERAL
Frequency Range (operating)
Maximum Amplitude (100 Hz, no payload)
7 Hz – 10 kHz
420 - 600 k CPM
2
10 Hz - 10 kHz
Not Available
2
20 g pk
196 m/s pk
10g
(98 m/s )
15 in/s pk
380 mm/s pk
6.2 in/s
0.16 m/s
50 mils pk - pk
1.27 mm pk - pk
19 mil
0.48 mm
ACCURACY OF READOUT
Acceleration (7 Hz to 10 Hz)
Undefined
Not Operable
Acceleration (10 Hz to 30 Hz)
±1 dB
Undefined
Acceleration (30 Hz to 35 Hz)
±3%
Undefined
Acceleration (35 Hz to 2 kHz)
±3%
±3%
Acceleration (2 kHz to 10 kHz)
±1 dB
±1 dB
Velocity (30 Hz to 35 Hz)
±3%
Undefined
Velocity (35 Hz to 400 Hz)
±3%
±3%
Velocity (400 Hz to 500 Hz)
±3%
Undefined
Displacement (30 Hz to 35 Hz)
±3%
Undefined
Displacement (35 Hz to 150 Hz)
±3%
±3%
Amplitude Linearity (100 gram load, 100 Hz)
< 1% up to 10 g pk
±1% (100 gram load)
Waveform Distortion (100 gram load, 30 Hz to 2 kHz)
5%
5% max (100 gram load at 35 Hz - 2 kHz)
UNITS OF READOUT
Acceleration
2
2
g pk
m/s pk
g pk
m/s pk
g rms
m/s rms
2
Not Available
Not Available
Velocity
in/s pk
mm/s pk
in/s pk
mm/s pk
Displacement
mils pk - pk
mm pk - pk
mils pk - pk
mm pk - pk
Frequency
Hz
CPM
Hz
Not Available
POWER REQUIREMENTS
Internal Battery (Lead Acid)
12 VDC, 4 Amp Hours
12 VDC, 4 Amp Hours
Operating Battery Life
(100 gram payload, 100 Hz 1 g pk)
18 Hours
Undefined (~4 to 5 hour estimate)
AC Power (for recharging battery)
110 – 240 Volts, 50 - 60 Hz
110 – 240 Volts, 50 - 60 Hz
TEMPERATURE
Operating
PHYSICAL
32° - 122° F
0° - 50° C
32° - 122° F
0° - 50° C
Dimensions (H x W x D)
8.5in x 12in x 11in
22cm x 30cm x 28cm
12in x 7in x 12in
30cm x 18cm x 30cm
Weight
18 lbs
8.2 kg
20 lbs
9.1 kg
Case Material
MPO-0001 REV NR
Pelican® Storm Case
The Modal Shop
Metal
7
Overall Drawing:
12.0 in
(30.5 cm)
10.0 in
(25.0 cm)
8.5 in
(21.5 cm)
Quickstart Guide:
MPO-0001 REV NR
The Modal Shop
8
Technical Tips:
Maximum advisable vibration levels are dependent upon the maximum frequency of operation and the
payload. The charts that follow show the maximum vibration levels as a function of both frequency and
payload. Payloads greater than 300 grams should not exceed the maximum frequencies specified
below. Payloads exceeding 800 grams should not be tested on the Model 9100D.
Excessive loads may result in damage to the moving coil and flexure. Care must be taken when testing
payloads with large footprints, particularly those with an offset center of gravity. Severe rocking modes
can produce high transverse motion and lateral loads on the moving coil and flexure, resulting in
damage. When fitting test transducers and fixtures onto the mounting platform, aim to keep the center
of gravity directly above, and in line with the center axis of the ¼-28 threaded mounting hole. This is a
safeguard against side loading the shaker.
MPO-0001 REV NR
The Modal Shop
9
Calibration Certificate (Included):
MPO-0001 REV NR
The Modal Shop
10
Supplied Accessories (Included with 9100D):
Accessories pictured below are included with each 9100D Portable Vibration Calibrator.
Accessory Pouch
Power Supply with Interchangable Plug Adaptors (9100-PS01)
2
3
1
1 – Mounting Pad (080A118)
2 – ¼-28 to ¼-28 Adaptor (081B20)
3 – 10-32 to ¼-28 Adaptor (081A08)
Mounting Wrench
Optional Accessories:
MODEL NUMBER
DESCRIPTION
9100-MNTKIT
Mounting accessory kit for 9100 Series Portable Vibration Calibrators, to adapt to 1/4-28
threaded mounting platforms. Includes studs/inserts (1/4-28, 10-32, 6-32 and 5-40) and bases
(for adhesive, magnetic and custom thread patterns).
9105C
Transfer standard reference accelerometer and ICP® sensor signal conditioner, for calibration
and system verification of the 9100 Series Portable Vibration Calibrators.
9100-MPPA01
Proximity probe adaptor kit, supports probes with common case threads ranging from M6 to
3/8". Includes Mitutoyo micrometer (metric) and 9100-PPA02 nickel plated 4140 steel target.
9100-PPA01
Proximity probe adaptor kit, supports probes with common case threads ranging from M6 to
3/8". Includes Mitutoyo micrometer and 9100-PPA02 nickel plated 4140 steel target.
9100-PPA02
Target for 9100-PPA01 or 9100MPPA01 proximity probe adaptor kit, nickel plated 4140 steel.
9100-PS01
18 Volt, 1 amp power supply / charger for 9100D Portable Vibration Calibrator, universal 100240 V, 50/60 Hz.
9100-BAT01
MPO-0001 REV NR
Replacement battery for 9100 Series Portable Vibration Calibrators.
The Modal Shop
11
More Information:







We site: The 9
D appears u der the ali ratio se tio of the ho e page of site as Porta le
Shaker Vi ratio Cali rator.
o http://www.modalshop.com/calibration/Portable-Shaker-Vibration-Calibrator?ID=639
o K9100D:
http://www.modalshop.com/calibration/Portable-Shaker-Vibration-Calibrator
Kit?ID=640
o 9100C:
http://www.modalshop.com/calibration/Portable-Vibration-Calibration-System?ID=274
Trade Shows: The 9100D will be displayed at different TMS and PCB trade shows. Please contact
TMS with information regarding upcoming shows.
The 9100D is also available as an IMI Model 699A06 (http://www.imi-sensors.com)
Specification Sheets: Available on product webpage
Datasheet: Available on product webpage
Manual: Available from TMS
Quick Start Guide: Available from TMS
Contact Information (Available for sales and technical support):
Rick Bono
The Modal Shop, Inc.
rbono@modalshop.com
Office: +1.513.351.9919
MPO-0001 REV NR
Marco Peres
The Modal Shop, Inc.
mperes@modalshop.com
Office: +1.513.351.9919
The Modal Shop
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising