CYL-003 7100LEDWall Mount Up/Down Light
13"
15.5"
5.8"
8"
2x**L
UP/DOWN
10.6"
1x**L
DOWN
INTERIOR/
EXTERIOR
CYL-003 7100LED Wall Mount Up/Down Light
TWIST AND LOCK MODULE
MODEL
LED
7100
1x15L
2x15L
m1000 lumen
module(s)
m1000 lumen
module(s)
1x23L
m1500 lumen
2x23L
m1500 lumen
COLOR TEMPERATURE
VOLT
OPTICS
27
2700K
120*
SP²
30
3000K
208
FL*
flood
40*
4000K
240
WFL
wide flood
VWFL
very wide flood
module(s)
277
module(s)
347³
spot
14° beam angle
24° beam angle
34° beam angle
OPTIONS
COLOUR
DIM
dimming ballast
0 -10V control
WT white texture
PC
photocell control
930
high CRI 3000K
modules
60° beam angle
BT
black texture
SM silver metallic
AN
aluminum natural
BZ
bronze
1x30L¹
m2000 lumen
module(s)
GM gunmetal
2x30L¹
m2000 lumen
module(s)
WS white satin
1x46L¹
m3000 lumen
BM black matte
2x46L¹
m3000 lumen
RAL specify no.
module(s)
module(s)
*Standard configuration unless otherwise specified
¹Fitted with active cooling device
²M1000 & M1500 available only
³Consult factory
SAMPLE CATALOG NUMBER: 7100 - 1x15L - 40 - 120 - FL - WT
Using this catalog number would order 1 model 7100 wall mount up/down luminaire, with one 4000K 15 watt LED module wired to 120 volts, 24° flood beam angle,
painted white texture polyester powder coat.
CONSTRUCTION
MOUNTING
OPTICAL
PROTECTION
Materials
Housing / ballast arm: Die formed
aluminum. Top / bottom plates:
Machined aluminum. Lenses: Solite,
tempered glass shield.
The 7100LED series is designed for
wall mounting. A heavy gauge
mounting plate is secured to the wall
and mounted independently of the
recessed 4" octagon j-box (by
others). The main housing hooks on
to the mounting plate and is secured
by two stainless steel set screws.
Silicone seal is required to seal
across the back of the ballast arm
and down the sides to exclude
moisture from entering the ballast
compartment.
The 7100LED utilizes "twist and lock"
Zhaga collars and modules. Optical
reflectors lock to modules for various
distributions.
The 7100LED series is listed for use
in wet locations to UL and CSA
Standards. L70 - 70% lumen
maintenance @ 50,000 hours. IP53
ingress protection class.
Protected against thermal overload,
hot module insertion, reversed
polarity and incorrect power supply
condition.
Electrical Components
Driver/Power Supply: 700 ma, 1000 &
1500 modules, 1400 ma 2000 & 3000
modules. Zhaga collars:
interchangeable modules, GE
Infusion modules (or equivilant).
www.rebellelighting.com
© 2012 REBELLE All rights reserved. R12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising