CCW-CG Series Cut-gate Automatic Weigher

CCW-CG Series Cut-gate Automatic Weigher
Cut-gate Automatic Weigher
CG series
Precise weighing accuracy
Gentle product handling
Quick product changeover
Dustproof construction
Easy-to-clean design
BENEFITS
1
Accurate Ishida load cell and
high-speed feedback control system
allow stable and accurate weighing.
2
Dustproof construction
To prevent dust dispersion, weighing
components are enclosed in an
easily detachable cover. A sealed
enclosure for gas flushing is available
as an option.
Open / Close Movement of Cut-gate
Gentle product handling
Compared with auger or volumetric
cup fillers, the cut-gate feeding
system dramatically reduces product
damage and minimizes product
giveaway.
3
4
Precise weighing accuracy
→
Precise opening and closing control
achieves accurate product feeding.
Easy to clean
Sealed enclosure (Option)
No tools are required to remove cut-gate, weigh hopper and many other
parts, simplifying clean-up procedures and reducing clean-up time.
5
Quick product changeover
Target weight, weighing speed and
other settings are easy to change via
the Remote Control Unit.
→
1
2
D I M E N S I O N S (unit: mm)
Single head
6
1 Cut-gate
Options
Stainless body construction
Sealed structure for gas filling
CF card slot
Data printer
Communication interface
2 Weigh hopper
S P E C I F I C AT I O N S
4 heads
Model
Head # variation
Target product
Weighing capacity
Weighing accuracy*
Minimum graduation
Weigh sensor
Weighing speed (Max.)*
Product infeed
Zero adjustment
Material/ Surface treatment
Power supply
CG-202LC
CG-203LC
1,2,3,4,6 and 10 head
Granular, free-flowing products
Max. 1,000 g (per head)
S.D. 0.2 - 0.4
0.1 g
1.0 g
Twin beam load cell
15 WPM (per head)
13 WPM (per head)
Free-fall
During operation:
Automatic zero adjustment
During standby:
Manual zero adjustment by touch key
Polished stainless steel
Single phase AC100 V~240 V, 50/60 Hz
* Depends on target weight, weighing speed and other conditions
** Depends on the product shape, product density, target weight, etc.
Specifications and design are subject to change without notice.
Exporter:
ISHIDA CO., LTD.
44 SANNO-CHO, SHOGOIN, SAKYO-KU
KYOTO, 606-8392 JAPAN
PHONE: 81-75-771-4141
FACSIMILE: 81-75-751-1634
URL: http://www.ishida.com
Manufacturer: ISHIDA ENGINEERING CO., LTD.
HEAT AND CONTROL, INC.
21121 CABOT BLVD.
HAYWARD, CA 94545-1132 USA
PHONE: 1(800)227-5980
1(510)259-0500
FACSIMILE: 1(510)259-0600
www.heatandcontrol.com
info@heatandcontrol.com
Printed on recycled paper.
Printed in Japan 906(SK) 13 No.1546A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising